(2007) Parallel Algorithms for Look-Up Table (LUT) Inverse Halftoning. Masters thesis, King Fahd University of Petroleum & Minerals, Dhahran.

(2005) CUSTOMER INTENTION AS THE KEY TO SUCCESSFUL CRM IMPLEMENTATION: EMPIRICAL INSIGHTS FROM AN SEM APPLICATION. PhD thesis, Southern Illinois University at Carbondale.

(2007) Computerized adaptive testing using neural networks. Masters thesis, King Fahd University of Petroleum and Minerals.

(2007) Multi-objective traffic engineering optimization over the Internet. Masters thesis, King Fahd University of Petroleum and Minerals.

(2004) Performance of punctured space-time codes over wireless channels and their applications. Masters thesis, King Fahd University of Petroleum and Minerals.

(2004) Potential impact of the WTO on Saudi construction firms. Masters thesis, King Fahd University of Petroleum and Minerals.

(2005) Symmetry solutions of some nonlinear PDE's. Masters thesis, King Fahd University of Petroleum and Minerals.

(2004) Cryogenic drilling of KevlarTM composite laminates. Masters thesis, King Fahd University of Petroleum and Minerals.

(2005) Calibration of VISSIM to the traffic conditions of Khobar and Dammam, Saudi Arabia. Masters thesis, King Fahd University of Petroleum and Minerals.

(2004) A Pose invariant face recognition system using subspace techniques. Masters thesis, King Fahd University of Petroleum and Minerals.

(2004) Numerical investigations of flow in a partially packed vessel. Masters thesis, King Fahd University of Petroleum and Minerals.

(2004) Studies on soil-foundation interaction in the Sabkha environment of Eastern Saudi Arabia. Masters thesis, King Fahd University of Petroleum and Minerals.

(2005) Design of microstrip linear phased array antenna using integrated array feeder. Masters thesis, King Fahd University of Petroleum and Minerals.

(2004) Pade approximants technique for the analysis of waveguide junctions and beam splitters. Masters thesis, King Fahd University of Petroleum and Minerals.

(2006) Experimental and numerical analyses of mixed mode crack initiation angle. Masters thesis, King Fahd University of Petroleum and Minerals.

(2004) A new blind equalization scheme using the principle of minimal disturbance. Masters thesis, King Fahd University of Petroleum and Minerals.

(2005) Effect of piezoelectric actuator placement on controlling the modes of vibration for flexible structures. Masters thesis, King Fahd University of Petroleum and Minerals.

(2005) Code acquisition in DS-CDMA systems optimization and DSP implementation. Masters thesis, King Fahd University of Petroleum and Minerals.

(2005) Efficacy of contractor prequalification models. Masters thesis, King Fahd University of Petroleum and Minerals.

(2006) Growth of uniform layers of nanosized zeolites on 3D ordered macroporous carbon: synthesis, characterization, and catalytic evaluation. Masters thesis, King Fahd University of Petroleum and Minerals.

(2006) A framework for a reliable and fault-tolerant network management architecture. Masters thesis, King Fahd University of Petroleum and Minerals.

(2006) Impact of variability of Nakagami-m parameter on the performance of digital communication systems. Masters thesis, King Fahd University of Petroleum and Minerals.

(2005) A prediction model for the residual flexural strength of corroded reinforced concrete beams. Masters thesis, King Fahd University of Petroleum and Minerals.

(2005) Development and testing of an artificial neural network model for predicting bottomhole pressure in vertical multiphase flow. Masters thesis, King Fahd University of Petroleum and Minerals.

(2005) Ant colony multi-optimization algorithm for circuit bi-partitioning. Masters thesis, King Fahd University of Petroleum and Minerals.

(2006) Optimization of ideal reactive distillation column using hybrid PSO algorithm. Masters thesis, King Fahd University of Petroleum and Minerals.

(2005) Facts-based stabilizers for power system stability enhancement. Masters thesis, King Fahd University of Petroleum and Minerals.

(2005) Finite element analysis of stick-slip vibrations in drillstrings. Masters thesis, King Fahd University of Petroleum and Minerals.

(2004) Reductive lie groups and mostow fibration. Masters thesis, King Fahd University of Petroleum and Minerals.

(2005) Prediction of turbulent heat transfer in a rotating narrow rectangular channel (AR=10) oriented at 120° from the direction of rotation. Masters thesis, King Fahd University of Petroleum and Minerals.

(2006) Methanol permeation through proton exchange membranes of direct methanol fuel cells. Masters thesis, King Fahd University of Petroleum and Minerals.

(2004) Arabic sign language recognition using an instrumented glove. Masters thesis, King Fahd University of Petroleum and Minerals.

(2005) U-model based adaptive internal model control for tracking of nonlinear dynamic plants. Masters thesis, King Fahd University of Petroleum and Minerals.

(2005) Continuous proximate time-optimal control for a third order servomechanism having a plant with three real roots. Masters thesis, King Fahd University of Petroleum and Minerals.

(2005) Studies on high performance NI-based composite catalysts for preferential methanation of CO in a SYNGAS. Masters thesis, King Fahd University of Petroleum and Minerals.

(2005) Effect of rate of water table rise on LNAPL entrapment in uniform and well-graded sands. Masters thesis, King Fahd University of Petroleum and Minerals.

(2005) Benchmarking framework for software watermarking. Masters thesis, King Fahd University of Petroleum and Minerals.

(2006) Fixed point results of some nonlinear maps with applications. PhD thesis, King Fahd University of Petroleum and Minerals.

(2006) Comparison of recent and miocene foraminifera from Eastern Saudi Arabia. Masters thesis, King Fahd University of Petroleum and Minerals.

(2004) Diffusion and adsorption of aromatics in zeolites by zero length column technique. Masters thesis, King Fahd University of Petroleum and Minerals.

(2004) Combined electrooxidation and electrocoagulation processes for the treatment of municipal wastewater. Masters thesis, King Fahd University of Petroleum and Minerals.

(2004) Kinetics and equilibrium adsorption of phosphates removal on activated alumina. Masters thesis, King Fahd University of Petroleum and Minerals.

(2004) Investigation of Internet-based SCADA systems: design and applications. Masters thesis, King Fahd University of Petroleum and Minerals.

(2004) Configurable analog building blocks for field programmable analog arrays. PhD thesis, King Fahd University of Petroleum and Minerals.

(2005) HVAC system operation strategies for energy conservation and thermal comfort in commercial buildings in Saudi Arabia. Masters thesis, King Fahd University of Petroleum and Minerals.

(2005) Damping enhancement of multimachine power system through STATCOM control. Masters thesis, King Fahd University of Petroleum and Minerals.

(2006) Dynamic projective coordinate system for elliptic curve crytography. PhD thesis, King Fahd University of Petroleum and Minerals.

(2004) Entropy generation around a solid sphere in a gas stream. Masters thesis, King Fahd University of Petroleum and Minerals.

(2003) Environmental impact on residential load modeling. Masters thesis, King Fahd University of Petroleum and Minerals.

(2004) CMOS bandpass filters for low-IF Bluetooth receiver. Masters thesis, King Fahd University of Petroleum and Minerals.

(2006) Studies on catalysts for preferential oxidation of CO in H2-Rich gas mixture. Masters thesis, King Fahd University of Petroleum and Minerals.

(2005) Absolutely pure modules and related concepts. Masters thesis, King Fahd University of Petroleum and Minerals.

(2004) Internal model control for nonlinear dynamic plants using U-model. Masters thesis, King Fahd University of Petroleum and Minerals.

(2005) A study of the static and dynamic properties of Al-Based A1₂O₃ metal matrix composites. Masters thesis, King Fahd University of Petroleum and Minerals.

(2005) New issues and problems in the dirac equation and their solutions. Masters thesis, King Fahd University of Petroleum and Minerals.

(2004) Genetic algorithm based test data generator. Masters thesis, King Fahd University of Petroleum and Minerals.

(2005) Design and implementation of all-digital CDMA code tracking loops. Masters thesis, King Fahd University of Petroleum and Minerals.

(2005) Study of imperfect production processes with shortages. Masters thesis, King Fahd University of Petroleum and Minerals.

(2004) Inverse scattering transform for variable coefficient KdV equation in shallow water. Masters thesis, King Fahd University of Petroleum and Minerals.

(2005) Package cohesion metric for object oriented systems. Masters thesis, King Fahd University of Petroleum and Minerals.

(2006) Internally hydrogen-bonded chiral methylenenitrones in cycloaddition reactions. Masters thesis, King Fahd University of Petroleum and Minerals.

(2004) Influence of polymer type and structure on polymer modification of Saudi asphalt. Masters thesis, King Fahd University of Petroleum and Minerals.

(2005) Design of a graphical user interface to augment a telerobotic stereo-vision system. Masters thesis, King Fahd University of Petroleum and Minerals.

(2005) Improving the performance of damaged FBECR in chloride-contaminated concrete. Masters thesis, King Fahd University of Petroleum and Minerals.

(2005) The impact of HVAC system selection and operation on energy conservation in an office building in hot and humid climates of Saudi Arabia. Masters thesis, King Fahd University of Petroleum and Minerals.

(2005) Structure-property relationships of metallocene linear low density polyethylene (LLDPE). Masters thesis, King Fahd University of Petroleum and Minerals.

(2005) Approximation by wavelets. Masters thesis, King Fahd University of Petroleum and Minerals.

(2005) Development and application of linear state estimators in control of reactive distillation. Masters thesis, King Fahd University of Petroleum and Minerals.

(2005) Breakdown of solutions of a system describing heat propagation with second sound. Masters thesis, King Fahd University of Petroleum and Minerals.

(2004) Investigations of the flow and pinning phenomena in radial flow reactors. Masters thesis, King Fahd University of Petroleum and Minerals.

(2005) Evaluation of performance measures for materials management process in industrial construction projects. Masters thesis, King Fahd University of Petroleum and Minerals.

(2006) Playout scheduling technique based on normalized least mean square (NLMS) algorithm. Masters thesis, King Fahd University of Petroleum and Minerals.

(2005) Automatic classification of speech and music in digitized audio. Masters thesis, King Fahd University of Petroleum and Minerals.

(2005) FSM state-assignment for area, power and testability using non-deterministic evolutionary heuristics. Masters thesis, King Fahd University of Petroleum and Minerals.

(2005) Serial-serial finite field multiplication. Masters thesis, King Fahd University of Petroleum and Minerals.

(2004) Test set compaction for sequential circuits based on test relaxation. Masters thesis, King Fahd University of Petroleum and Minerals.

(2004) Effect of bolt layout on the mechanical behavior of bolted joint. Masters thesis, King Fahd University of Petroleum and Minerals.

(2005) Numerical investigation of erosion of a pipe protruded in a sudden contraction. Masters thesis, King Fahd University of Petroleum and Minerals.

(2005) Determining optimal target values for two processes in series. Masters thesis, King Fahd University of Petroleum and Minerals.

(2005) Wavelets and solution of ordinary differential equations. Masters thesis, King Fahd University of Petroleum and Minerals.

(2006) Sequential injection analysis technique for industrial water quality control. Masters thesis, King Fahd University of Petroleum and Minerals.

(2005) Analysis of Add/Drop optical waveguide filters with embedded resonant cavities using the method of lines. Masters thesis, King Fahd University of Petroleum and Minerals.

(2004) Design and modeling of high speed modulo multipliers for cryptosystems. Masters thesis, King Fahd University of Petroleum and Minerals.

(2004) Desulfurization of gasoline and diesel fuels, using non-hydrogen consuming techniques. Masters thesis, King Fahd University of Petroleum and Minerals.

(2005) Multi-scale analysis techniques in pattern recognition systems. Masters thesis, King Fahd University of Petroleum and Minerals.

(2005) On some seismic inverse problems. PhD thesis, King Fahd University of Petroleum and Minerals.

(2004) Rheology of gelling polymers used in reservoir water shutoff treatments. Masters thesis, King Fahd University of Petroleum and Minerals.

(2004) Treatment of refinery wastewater using crossflow membrane bioreactor (CF-MBR). Masters thesis, King Fahd University of Petroleum and Minerals.

(2004) Design of optimal variable structure controllers: applications to power system dynamics. Masters thesis, King Fahd University of Petroleum and Minerals.

(2006) Adaptive fuzzy logic based framework for handling imprecision and uncertainty in software development effort prediction models. Masters thesis, King Fahd University of Petroleum and Minerals.

(2005) Electrochemical removal of carbon monoxide from hydrogen using nickel catalyst. Masters thesis, King Fahd University of Petroleum and Minerals.

(2005) The effect of environmental conditions on the hydrostatic burst pressure and impact performance of glass fiber reinforced thermoset pipes. Masters thesis, King Fahd University of Petroleum and Minerals.

(2006) Collaborative autonomous interface agent for personalized web search. Masters thesis, King Fahd University of Petroleum and Minerals.

(2005) Combining classifiers using the dempster-shafer theory of evidence. Masters thesis, King Fahd University of Petroleum and Minerals.

(2004) Two-point boundary value problems for first order impulsive differential equations. Masters thesis, King Fahd University of Petroleum and Minerals.

(2005) Effects of strain rate and temperature on fracture toughness and tensile properties of CPVC. Masters thesis, King Fahd University of Petroleum and Minerals.

(2004) Invariant object recognition. Masters thesis, King Fahd University of Petroleum and Minerals.

(2005) Measurement based comparison between VoIPoMPLS and VoIP using software routers. Masters thesis, King Fahd University of Petroleum and Minerals.

(2004) Design, rating and exergy analysis of evaporative heat exchangers. Masters thesis, King Fahd University of Petroleum and Minerals.

(2005) Designing of objects using smooth cubic splines. Masters thesis, King Fahd University of Petroleum and Minerals.

(2004) Visualization with NURBS using simulated annealing optimization technique. Masters thesis, King Fahd University of Petroleum and Minerals.

(2004) New algorithms for the identification of a class of hammerstein-wiener nonlinear systems. Masters thesis, King Fahd University of Petroleum and Minerals.

(2005) Laser evaporative heating in relation to machining. Masters thesis, King Fahd University of Petroleum and Minerals.

(2006) Envelope design for thermal comfort and reduced energy consumption in residential buildings. Masters thesis, King Fahd University of Petroleum and Minerals.

(2005) Assessment of the relationship between the spilled LNAPL volume and its thickness in monitoring wells considering the water table fluctuation history. PhD thesis, King Fahd University of Petroleum and Minerals.

(2004) Effect of frequency on crack propagation in CPVC and HDPE at different temperatures. Masters thesis, King Fahd University of Petroleum and Minerals.

(2005) Content-aware congestion control over MPLS networks for multimedia transmission. Masters thesis, King Fahd University of Petroleum and Minerals.

(2005) Numerical investigations of melting of ice in a box. Masters thesis, King Fahd University of Petroleum and Minerals.

(2005) Laminar mixed convection in vertical channels. Masters thesis, King Fahd University of Petroleum and Minerals.

(2005) Extensions to XML-based network management. Masters thesis, King Fahd University of Petroleum and Minerals.

(2005) An architecture for secure document flow and archival systems. Masters thesis, King Fahd University of Petroleum and Minerals.

(2006) Strength and durability characteristics of aluminum joints bonded by rubber-modified and aluminum filled epoxy adhesive. Masters thesis, King Fahd University of Petroleum and Minerals.

(2005) Development of reconfigurable nonlinear circuits for neural networks. Masters thesis, King Fahd University of Petroleum and Minerals.

(2006) Effect of environment on the fatigue and the tensile properties of glass fiber reinforced vinyl ester and epoxy thermosets. Masters thesis, King Fahd University of Petroleum and Minerals.

(2004) Numerical and experimental studies of non reactive and reactive mixing. Masters thesis, King Fahd University of Petroleum and Minerals.

(2005) An adaptive neural networks controller for the inline surface oil/water separator. Masters thesis, King Fahd University of Petroleum and Minerals.

(2006) Power based scheduling algorithms for WCDMA networks. Masters thesis, King Fahd University of Petroleum and Minerals.

(2006) Design and analysis of efficient and secure elliptic curve cryptoprocessors. PhD thesis, King Fahd University of Petroleum and Minerals.

(2005) Extraction of aromatics using green solvents based on ionic liquids. Masters thesis, King Fahd University of Petroleum and Minerals.

(2005) Non-noetherian krull domains issued from symbolic blow-up and rees algebras. Masters thesis, King Fahd University of Petroleum and Minerals.

(2004) Catalytic carbonylation of terminal alkyne with amine: computational and experimental investigations of regioselectivity. Masters thesis, King Fahd University of Petroleum and Minerals.

(2006) Catalytic hydroformylation of alkenes and polyalkenes: a novel approaches to catalyst synthesis, characterization and recycling. PhD thesis, King Fahd University of Petroleum and Minerals.

(2003) Memory performance evaluation of high throughput servers. Masters thesis, King Fahd University of Petroleum and Minerals.

(2005) Identification of Saudi Arabian License Plates. Masters thesis, King Fahd University of Petroleum and Minerals.

(2006) Improved rate-compatible low-density parity-check codes with applications to wireless channels. Masters thesis, King Fahd University of Petroleum and Minerals.

(2005) Fuzzy takagi-sugeno and LMS based control techniques. Masters thesis, King Fahd University of Petroleum and Minerals.

(2005) Behavior of transmitted wave in gain media. Masters thesis, King Fahd University of Petroleum and Minerals.

(2006) On the optimum communication cost problem in interconnection network. Masters thesis, King Fahd University of Petroleum and Minerals.

(1999) Wind tunnel testing of an airfoil with a moving surface boundary-layer control. Masters thesis, King Fahd University of Petroleum and Minerals.

(1988) Pleistocene-holocene sedimentation along King fahd Causeway between Saudi Arabia and Bahrain. Masters thesis, King Fahd University of Petroleum and Minerals.

(1997) Signaling traffic analysis of GSM authentication protocols. Masters thesis, King Fahd University of Petroleum and Minerals.

(1996) Evolution based scheduling of precedence computations with communication costs. Masters thesis, King Fahd University of Petroleum and Minerals.

(1999) The effect of aging on the fatigue strength of alloy 800HT. Masters thesis, King Fahd University of Petroleum and Minerals.

(1999) Performance and design of space-time trellis codes for wireless channels. Masters thesis, King Fahd University of Petroleum and Minerals.

(1998) Building a framework for coupling measurement systems. Masters thesis, King Fahd University of Petroleum and Minerals.

(1993) Non-linear finite element analysis of reinforced concrete beams repaired by plate bonding. PhD thesis, King Fahd University of Petroleum and Minerals.

(1990) Design of fractionally spaced equalizers. Masters thesis, King Fahd University of Petroleum and Minerals.

(2001) Analytical and finite element investigation of initial clearance effect on tube-to-tubesheet joint strength. Masters thesis, King Fahd University of Petroleum and Minerals.

(1999) Stochastic model for love wave propagation in an inhomogeneous layer. Masters thesis, King Fahd University of Petroleum and Minerals.

(1992) Enforcing the role of construcion insurance in Saudi Arabia. Masters thesis, King Fahd University of Petroleum and Minerals.

(1971) Air separation on carbon molecular sieves, 4A and 5A zeolites by pressure swing adsorption. Masters thesis, King Fahd University of Petroleum and Minerals.

(2000) Development and analysis of transient models for the biofiltration of single and mixed volatile organic compounds. Masters thesis, King Fahd University of Petroleum and Minerals.

(1994) A neural network approach for load flow estimation and var allocation. Masters thesis, King Fahd University of Petroleum and Minerals.

(1991) Construction cost control in the Eastern Province of Saudi Arabia. Masters thesis, King Fahd University of Petroleum and Minerals.

(2002) Integrated quality and maintenance models for multi-stage production systems with batch shipments. Masters thesis, King Fahd University of Petroleum and Minerals.

(1996) Quantitative and subjective assessments of indoor air quality in KFUPM buildings. Masters thesis, King Fahd University of Petroleum and Minerals.

(2001) Assessment of factors affecting building maintenance management auditing in Saudi Arabia. Masters thesis, King Fahd University of Petroleum and Minerals.

(1989) Status of hydrological network in south-western region of the Kingdom of Saudi Arabia. Masters thesis, King Fahd University of Petroleum and Minerals.

(1998) Optimization of mixed CMOS/BiCMOS circuits using tabu search. Masters thesis, King Fahd University of Petroleum and Minerals.

(2000) Project/process simulation modeling using discrete event construction simulation language stroboscope. Masters thesis, King Fahd University of Petroleum and Minerals.

(1990) Design of voiceband echo cancellers. Masters thesis, King Fahd University of Petroleum and Minerals.

(2003) Influence of temperature and wind on moisture transport in cementitious materials. Masters thesis, King Fahd University of Petroleum and Minerals.

(1992) Activity of Ni/A1 O catalyst for a methanation reaction. Masters thesis, King Fahd University of Petroleum and Minerals.

(1993) Performance evaluation and multiobjective optimization of passive vehicle suspension systems. Masters thesis, King Fahd University of Petroleum and Minerals.

(1997) Equational characterizations of cyclic purity and single compactness. Masters thesis, King Fahd University of Petroleum and Minerals.

(1996) On the margin stability of interval matrices. Masters thesis, King Fahd University of Petroleum and Minerals.

(2001) Assessment of constructability practices among general contractors in the Eastern Province of Saudi Arabia. Masters thesis, King Fahd University of Petroleum and Minerals.

(1990) Performance of slow sand filters in treating secondary effluent using different sizes of local sand. Masters thesis, King Fahd University of Petroleum and Minerals.

(2003) Memory performance evaluation of high throughput servers. Masters thesis, King Fahd University of Petroleum and Minerals.

(1991) Chemical analysis of some penicillin and cephalosporin drugs. Masters thesis, King Fahd University of Petroleum and Minerals.

(1990) Prediction of species concentration and temperature profile in methanol oxygen and argon flame. Masters thesis, King Fahd University of Petroleum and Minerals.

(1999) A Parallel Tabu search algorithm for VLSI standard cell placement. Masters thesis, King Fahd University of Petroleum and Minerals.

(1993) Experimental determination of the frequency spectrum of the rose Bengal picosecond fluorescence using two beating ring dye lasers. Masters thesis, King Fahd University of Petroleum and Minerals.

(2001) Measuring class cohesion in object-oriented systems. Masters thesis, King Fahd University of Petroleum and Minerals.

(2002) Protein partitioning in pH-responsive polymeric amino acid and assocating polymers. Masters thesis, King Fahd University of Petroleum and Minerals.

(1996) Plastic shrinkage cracking in hot weather conditions. Masters thesis, King Fahd University of Petroleum and Minerals.

(1992) Nonlinear behavior of cylinder-plate junction on tensionless elastic subgrade. Masters thesis, King Fahd University of Petroleum and Minerals.

(1996) Self organizing variable structure controllers. Masters thesis, King Fahd University of Petroleum and Minerals.

(2002) An Efficient test-pattern relaxation technique for synchronous sequential circuits. Masters thesis, King Fahd University of Petroleum and Minerals.

(1996) The relationship between the project size and the safety level in building construction projects. Masters thesis, King Fahd University of Petroleum and Minerals.

(2001) Characterization of catalytic materials containing zeolites using n-hexane cracking reaction. Masters thesis, King Fahd University of Petroleum and Minerals.

(1998) EPR study on vanadium model compounds containing nitrogen and sulfur heteroatoms. PhD thesis, King Fahd University of Petroleum and Minerals.

(1992) EPR study of vanadyl complexes with Schiff bases derived from S-Methyl-Carbodithioato-Hydrazine. Masters thesis, King Fahd University of Petroleum and Minerals.

(1992) Density-temperature behavior of pure and defined binary and ternary hydrocarbon mixtures. Masters thesis, King Fahd University of Petroleum and Minerals.

(1993) Comparative study of computational methods for the solution of the two-dimensional reservoir flow equations. Masters thesis, King Fahd University of Petroleum and Minerals.

(1992) A New correlation for two-phase flow through chokes. Masters thesis, King Fahd University of Petroleum and Minerals.

(1994) A PC-based system for the determination of harmonics and intermodulation products in nonlinear circuits. Masters thesis, King Fahd University of Petroleum and Minerals.

(2001) Palladium-catalyzed regioselective carbonylative coupling of alkynes with aniline derivatives. Masters thesis, King Fahd University of Petroleum and Minerals.

(1995) Maintenance scheduling of power system generating units by tabu search. Masters thesis, King Fahd University of Petroleum and Minerals.

(1996) Cost estimation practice for buildings by A/E firms in the Eastern Province, Saudi Arabia. Masters thesis, King Fahd University of Petroleum and Minerals.

(1996) Parallelizing the rete-match algorithm for distributed memory architecturs. Masters thesis, King Fahd University of Petroleum and Minerals.

(1997) Development of multiphase flow metering set-up utilizing coriolis meters. Masters thesis, King Fahd University of Petroleum and Minerals.

(1991) The effect of inexact line search on conjugate gradient methods. Masters thesis, King Fahd University of Petroleum and Minerals.

(2000) Thermodynamics of solution by gas liquid chromatography of nonmesomorphic solutes in the isotropic and nematic phases of liquid crystalline solvents. Masters thesis, King Fahd University of Petroleum and Minerals.

(2002) Treatment of water contaminated with dimethyl phthalate by Fenton, Photo-Fenton and UV/H₂O₂ processes. PhD thesis, King Fahd University of Petroleum and Minerals.

(2000) Synthesis and study of corrosion inhibiting activity of several 1, 12-dodacanediamine derivatives. Masters thesis, King Fahd University of Petroleum and Minerals.

(1994) Nonlinear plant control using neural networks: a design procedure through linearization. Masters thesis, King Fahd University of Petroleum and Minerals.

(1998) The Transliner current controlled conveyor and its applications. Masters thesis, King Fahd University of Petroleum and Minerals.

(1997) A new model reduction scheme for linear time-invariant systems with polynomial. Masters thesis, King Fahd University of Petroleum and Minerals.

(1994) Identification of block cascade models of nonlinear systems. Masters thesis, King Fahd University of Petroleum and Minerals.

(2001) QoS-driven multicast routing algorithms. Masters thesis, King Fahd University of Petroleum and Minerals.

(1995) Canonical elastoplastic - damage modelling of reinforced concrete. PhD thesis, King Fahd University of Petroleum and Minerals.

(1995) Concrete repair with silica fume shotcrete. Masters thesis, King Fahd University of Petroleum and Minerals.

(1992) The neutron detection efficiency measurements of a 10 inch NE213 scientillator. Masters thesis, King Fahd University of Petroleum and Minerals.

(1992) Lower Cretaceous stratigraphy and depositional history of the Rub' Al Khali bsin. Masters thesis, King Fahd University of Petroleum and Minerals.

(1994) A C-Based high level synthesis system. Masters thesis, King Fahd University of Petroleum and Minerals.

(2003) Risk and hydraulic reliability analysis of water distribution systems. Masters thesis, King Fahd University of Petroleum and Minerals.

(2002) Efficient test relaxation techniques for combinational logic circuits. Masters thesis, King Fahd University of Petroleum and Minerals.

(2001) Theoretical potential scans and vibrational spectra of two rotors halomethyl isocyanates. Masters thesis, King Fahd University of Petroleum and Minerals.

(2000) Echo cancellation using a variable step-size NLMS algorithm. Masters thesis, King Fahd University of Petroleum and Minerals.

(1989) Determination of construction contract duration for public projects in Saudi Arabia. Masters thesis, King Fahd University of Petroleum and Minerals.

(2001) Application of neural network to the determination of well-test interpretation model for horizontal wells. Masters thesis, King Fahd University of Petroleum and Minerals.

(2003) Test facility development for small centrifugal compressors (design stage). Masters thesis, King Fahd University of Petroleum and Minerals.

(1997) Direct load control using programmable logic controller. Masters thesis, King Fahd University of Petroleum and Minerals.

(2001) Compositional gradient calculations for a Saudi Arabian gas condensate reservoir. Masters thesis, King Fahd University of Petroleum and Minerals.

(2004) Modeling and simulation of a combined isomerization reactor/pressures swing adsorption/membrane unit. Masters thesis, King Fahd University of Petroleum and Minerals.

(1996) Automated VHDL composition from AHPL. Masters thesis, King Fahd University of Petroleum and Minerals.

(1992) Multiple objective LP (MOLP) for scheduling repetitive projects. Masters thesis, King Fahd University of Petroleum and Minerals.

(1994) The effects of mode perceptions on intercity mode-choice behavior in Saudi Arabia. PhD thesis, King Fahd University of Petroleum and Minerals.

(1992) On the inverstion of the Laplace transform. PhD thesis, King Fahd University of Petroleum and Minerals.

(1996) Chemometric optimization and kinetic developments in flow injection analysis. PhD thesis, King Fahd University of Petroleum and Minerals.

(2003) Integrated deterministic/probabilistic petroleum volume evaluation for a carbonate reservoir. Masters thesis, King Fahd University of Petroleum and Minerals.

(1997) Relationship between the noncompliance behavior at signalized intersection an driver characteristics. Masters thesis, King Fahd University of Petroleum and Minerals.

(1994) Corrosivity of water-base drilling fluids in deep, hot wells. Masters thesis, King Fahd University of Petroleum and Minerals.

(1997) Fuzzy logic controller for power system stability enhancement. Masters thesis, King Fahd University of Petroleum and Minerals.

(2002) Impact of building rezoning and change of use on energy consumption and occupants thermal comfort. Masters thesis, King Fahd University of Petroleum and Minerals.

(2001) Numerical simulation of one- and two-phase flows in unpacked and partially packed vessels. Masters thesis, King Fahd University of Petroleum and Minerals.

(2000) Bulk separation of binary gas mixtures by pressure swing adsorption. Masters thesis, King Fahd University of Petroleum and Minerals.

(1994) Study of periodic waveguides by the finite-difference time-domain method and the method of lines. PhD thesis, King Fahd University of Petroleum and Minerals.

(1996) Vibration control of rotor-bearing systems using neural networks. Masters thesis, King Fahd University of Petroleum and Minerals.

(1996) Budget estimating models for the construction cost of public school building in Saudi Arabia. Masters thesis, King Fahd University of Petroleum and Minerals.

(1995) Calculations of turbulent flow and heat transfer in periodically converging-diverging channels. Masters thesis, King Fahd University of Petroleum and Minerals.

(1992) Computation of singularities in B.V.P.'s using finite differences with block-elimination. Masters thesis, King Fahd University of Petroleum and Minerals.

(1995) Development of Raney-Ni gas diffusion electrodes for fuel-cells. PhD thesis, King Fahd University of Petroleum and Minerals.

(1994) Measurements of L-Subshell Ionization Cross Sections by energetic a particles for Ho, Er, and Tm. Masters thesis, King Fahd University of Petroleum and Minerals.

(1994) Mixed convection from a horizontal cylinder rotating in a cooling cross-stream. Masters thesis, King Fahd University of Petroleum and Minerals.

(2001) Development of a multiresolution framework for NURBS. Masters thesis, King Fahd University of Petroleum and Minerals.

(2001) Experimenting with evolutionary meta-heuristics for state justification in sequential ATPG. Masters thesis, King Fahd University of Petroleum and Minerals.

(1998) An annulus approach to fuzzy subgroups. Masters thesis, King Fahd University of Petroleum and Minerals.

(1995) Transient stability assessment using artificial neural networks. Masters thesis, King Fahd University of Petroleum and Minerals.

(1995) Active filters and oscillators using current feedback operational amplifiers. Masters thesis, King Fahd University of Petroleum and Minerals.

(1993) Heat transfer mechanisms governing laser metal interactions. Masters thesis, King Fahd University of Petroleum and Minerals.

(2003) Mixed semidefinite and second-order cone optimization approach for the Hankel Matrix approximation problem. Masters thesis, King Fahd University of Petroleum and Minerals.

(2001) Modified algorithms for the decoding of hamming product codes. Masters thesis, King Fahd University of Petroleum and Minerals.

(2001) Performance evaluation of Rake receiver with adaptive channel estimation for IMT-DS system. Masters thesis, King Fahd University of Petroleum and Minerals.

(1999) Parameter estimation using median ranked set sampling. Masters thesis, King Fahd University of Petroleum and Minerals.

(2003) Study of octane enhancers for gasoline in the Kingdom of Saudi Arabia. Masters thesis, King Fahd University of Petroleum and Minerals.

(2002) Reservoir quality of the Unayzah formation in Waqr, Tinat, and Haradh fields. Masters thesis, King Fahd University of Petroleum and Minerals.

(1999) Neural networks-based decision feedback equalization using lattice structure. Masters thesis, King Fahd University of Petroleum and Minerals.

(2002) Optimum process targeting with error and error-free sampling inspection plan. Masters thesis, King Fahd University of Petroleum and Minerals.

(2000) The Interaction between soil and buried bent pipelines. Masters thesis, King Fahd University of Petroleum and Minerals.

(2000) Effects of geotextiles on the load-carrying capacity of pavements on Sabkha. Masters thesis, King Fahd University of Petroleum and Minerals.

(2001) Build operate transfer (BOT) project delivery system in Saudi Arabia. Masters thesis, King Fahd University of Petroleum and Minerals.

(1994) Prediction of harmonic and intermodulation performance of frequency dependent nonlinear circuits and systems. Masters thesis, King Fahd University of Petroleum and Minerals.

(2001) Targeting in multi-class screening under error and error-free measurement systems. Masters thesis, King Fahd University of Petroleum and Minerals.

(1997) Solution behavior of hydrophobic non-ionic and ionic polymers. Masters thesis, King Fahd University of Petroleum and Minerals.

(1998) Improved quantization of DCT based compression algorithms for video teleconferencing applications. Masters thesis, King Fahd University of Petroleum and Minerals.

(2000) Performance of quadrature amplitude modulation in Nakagami fading channels with diversity. Masters thesis, King Fahd University of Petroleum and Minerals.

(1990) High temperature ceramic superconductors: oxalate co-precipitation procedure for synthesis and influence of compositional variations. Masters thesis, King Fahd University of Petroleum and Minerals.

(1989) Second law analysis and optimization of solar hot water systems. Masters thesis, King Fahd University of Petroleum and Minerals.

(1992) A new multisampling-based non-coherent FSK receiver using parametric spectrum estimators. Masters thesis, King Fahd University of Petroleum and Minerals.

(1997) Overhad costs in building construction in Saudi Arabia. Masters thesis, King Fahd University of Petroleum and Minerals.

(1993) Evaluation of Dammam carrousel treatment plant for nitrogen removal. Masters thesis, King Fahd University of Petroleum and Minerals.

(1992) Performance of TCM with concatenated codes over fading channels. Masters thesis, King Fahd University of Petroleum and Minerals.

(2000) A Hybrid error control scheme for ATM networks. Masters thesis, King Fahd University of Petroleum and Minerals.

(2001) A Simulation model for the shuttle bus traffic during Nafrah period. Masters thesis, King Fahd University of Petroleum and Minerals.

(1994) Characterization of the acidic properties of zeolites and their catalytic behavior in the synthesis of MTBE. Masters thesis, King Fahd University of Petroleum and Minerals.

(2004) Investigations on the influence of disk location and unbalance on fluid induced vibrations of a shaft-disk-bearing system. Masters thesis, King Fahd University of Petroleum and Minerals.

(1993) The effects of faulty design and construction on building maintenance. Masters thesis, King Fahd University of Petroleum and Minerals.

(2002) Copper recovery from wastewater using an electrochemical rotating barrel reactor. Masters thesis, King Fahd University of Petroleum and Minerals.

(1997) Integrating heterogeneous database schemas using an on-line taxonomy: a methodology for creating a global schema. Masters thesis, King Fahd University of Petroleum and Minerals.

(1993) Optimal tool replacement and resetting strategies. Masters thesis, King Fahd University of Petroleum and Minerals.

(1999) Measuring quality in the service industry. Masters thesis, King Fahd University of Petroleum and Minerals.

(1992) New flavour symmetry and nonleptonic decays of D and B mesons. Masters thesis, King Fahd University of Petroleum and Minerals.

(1998) Fault characterization and testability considerations in multi-valued logic circuits. Masters thesis, King Fahd University of Petroleum and Minerals.

(1992) Numerical simulation of continuous countercurrent adsorption systems. Masters thesis, King Fahd University of Petroleum and Minerals.

(2001) An Object-oriented model for semantic analysis of natural languages. Masters thesis, King Fahd University of Petroleum and Minerals.

(1996) Management of magnetic fields in and around substations. Masters thesis, King Fahd University of Petroleum and Minerals.

(1993) Calculations of fluid flow and heat transfer in expanding ducts. Masters thesis, King Fahd University of Petroleum and Minerals.

(2003) Modified ANT colony algorithm for combinational logic circuits design. Masters thesis, King Fahd University of Petroleum and Minerals.

(2000) Ethylene oligomerization to olefins on supported nickel catalyst. Masters thesis, King Fahd University of Petroleum and Minerals.

(2004) Performance analysis and modeling of disk I/O subsystem in high throughput servers. Masters thesis, King Fahd University of Petroleum and Minerals.

(1999) Solution methods for the economic dispatch problem and some of its variants. Masters thesis, King Fahd University of Petroleum and Minerals.

(1995) Impact of process variables on nutrient removal in slow sand filters. Masters thesis, King Fahd University of Petroleum and Minerals.

(2004) Numerical analysis of entropy generation in laminar viscous fluid flow between parallel plates. Masters thesis, King Fahd University of Petroleum and Minerals.

(2003) Digital circuit design through simulated evolution. Masters thesis, King Fahd University of Petroleum and Minerals.

(2003) Adaptive multiuser detection with decision feedback equalizer for interference cancellation. Masters thesis, King Fahd University of Petroleum and Minerals.

(1991) The development of an intelligent alarm processor. Masters thesis, King Fahd University of Petroleum and Minerals.

(2001) Signal strength prediction in the Eastern region of Saudi Arabia. Masters thesis, King Fahd University of Petroleum and Minerals.

(1999) Free energy surface an scaling in High-T c superconductors. Masters thesis, King Fahd University of Petroleum and Minerals.

(1992) An Arabic sentence generator. Masters thesis, King Fahd University of Petroleum and Minerals.

(1997) HCORDIC: a high-performance cordic algorithm. Masters thesis, King Fahd University of Petroleum and Minerals.

(1995) Associative memory neural networks for error correction of linear block codes. Masters thesis, King Fahd University of Petroleum and Minerals.

(1992) Non-uniform reference model in multiple bus multiprocessors. Masters thesis, King Fahd University of Petroleum and Minerals.

(1996) Reducing the complexity of rational cubics for designing the objects. Masters thesis, King Fahd University of Petroleum and Minerals.

(1996) A new traffic control scheme for ATM networks. Masters thesis, King Fahd University of Petroleum and Minerals.

(1994) Communication over fading channels with frequency offsets. Masters thesis, King Fahd University of Petroleum and Minerals.

(1998) Multiobjective water resources planning under demand, supply and quality uncertainties. Masters thesis, King Fahd University of Petroleum and Minerals.

(1996) Geostatistical modeling of Arab-D reservoir, Harmaliyah field, Saudi Arabia. Masters thesis, King Fahd University of Petroleum and Minerals.

(2004) Assessment of risk management perceptions and practices of construction contractors in Saudi Arabia. Masters thesis, King Fahd University of Petroleum and Minerals.

(2003) Application of space-time trellis codes for image transmission over wireless channels. Masters thesis, King Fahd University of Petroleum and Minerals.

(2003) Adaptive fuzzy logic based framework for software development effort prediction. Masters thesis, King Fahd University of Petroleum and Minerals.

(1995) A neural network approach to feedback linearization. Masters thesis, King Fahd University of Petroleum and Minerals.

(1992) Stratigraphical and microfacies analysis of the late Eocene - early Oligocene succession of Jabal Hafeet, U.A.E. Masters thesis, King Fahd University of Petroleum and Minerals.

(1997) Generalised eigenvalue problem for tridiagonal symmetric interval matrices. Masters thesis, King Fahd University of Petroleum and Minerals.

(1994) A programmable self-adjusting SCR-based AC voltage regulator. Masters thesis, King Fahd University of Petroleum and Minerals.

(1994) Studies on blow-up. Masters thesis, King Fahd University of Petroleum and Minerals.

(1997) Performance evaluation of slow sand filters: a probabilistic approach. Masters thesis, King Fahd University of Petroleum and Minerals.

(1999) Transmission expansion planning using artificial intelligent tools. Masters thesis, King Fahd University of Petroleum and Minerals.

(2000) Computational study of conformational behavior and analyses of vibrational spectra of some ketenes. Masters thesis, King Fahd University of Petroleum and Minerals.

(1992) Realization of a transceiver circuit based on a newly developed coding scheme. Masters thesis, King Fahd University of Petroleum and Minerals.

(2003) New structural similarity metrics for UML models. Masters thesis, King Fahd University of Petroleum and Minerals.

(2002) Carburization behavior of iron-based alloys in methane/hydrogen gas mixtures. PhD thesis, King Fahd University of Petroleum and Minerals.

(1992) Surface charge behavior and adsorption of surfactants on carbonate rocks. Masters thesis, King Fahd University of Petroleum and Minerals.

(1997) Neural observers for non-linear systems. Masters thesis, King Fahd University of Petroleum and Minerals.

(1998) Selective encryption techniques for secure transmission of MPEG video bit-streams. Masters thesis, King Fahd University of Petroleum and Minerals.

(1991) Preparation and characterization of Y Ba₂ Cu₃ 0₇ high-T superconductor. Masters thesis, King Fahd University of Petroleum and Minerals.

(1994) Nonholonomic motion planning for wheeled mobile systems using geometric phases. Masters thesis, King Fahd University of Petroleum and Minerals.

(2000) A Modified nodal formulation parametric sensitivities for power system analysis. Masters thesis, King Fahd University of Petroleum and Minerals.

(1996) A grafting approach to neural network construction. Masters thesis, King Fahd University of Petroleum and Minerals.

(2002) Jobs scheduling on single machine under various maintenance policies. Masters thesis, King Fahd University of Petroleum and Minerals.

(2001) Visualization with spline using a genetic algorithm. Masters thesis, King Fahd University of Petroleum and Minerals.

(1998) Some quality and reliability aspcts of aluminium extrusion process. Masters thesis, King Fahd University of Petroleum and Minerals.

(1998) Synthesis and solution properties of polymeric zwitterionic ammonium betains. Masters thesis, King Fahd University of Petroleum and Minerals.

(1995) Investigation of fatigue crack growth rates under variable amplitude loading. Masters thesis, King Fahd University of Petroleum and Minerals.

(2001) Study of the photochemical properties of some aromatic compounds on molecular sieves using a picosecond pulse laser system. PhD thesis, King Fahd University of Petroleum and Minerals.

(1997) Mathematical modeling and optimization of precipitation hardening of extrudable aluminium alloys. Masters thesis, King Fahd University of Petroleum and Minerals.

(1993) A Framework for the development of distributed applications. Masters thesis, King Fahd University of Petroleum and Minerals.

(1995) Local properties of some polynomial classes of harmonic mappings. Masters thesis, King Fahd University of Petroleum and Minerals.

(2001) Diagenesis of Jauf sandstone in Hawiyah area. Masters thesis, King Fahd University of Petroleum and Minerals.

(1997) Modeling of pavement condition and maintenance priority ranking for road networks. PhD thesis, King Fahd University of Petroleum and Minerals.

(1992) Microcontroller based PWM UPS. Masters thesis, King Fahd University of Petroleum and Minerals.

(2002) Finite element modeling and analysis of rotor-bearing systems. Masters thesis, King Fahd University of Petroleum and Minerals.

(1992) Supersonic jet impingement on a flat surface at angles from -5° to 30°. Masters thesis, King Fahd University of Petroleum and Minerals.

(1996) Excitation transfer in highly excited calcium atoms through thermal collisions with argon. Masters thesis, King Fahd University of Petroleum and Minerals.

(1998) Curvature analysis using multiresolution techniques. PhD thesis, King Fahd University of Petroleum and Minerals.

(1986) Heat transfer characteristics of ice solidification using a two-phase closed thermosyphon. Masters thesis, King Fahd University of Petroleum and Minerals.

(1997) Estimation and filtering of harmonics. Masters thesis, King Fahd University of Petroleum and Minerals.

(2004) Modeling and analysis of extrusion pressure and die life for complex aluminum profiles. PhD thesis, King Fahd University of Petroleum and Minerals.

(1994) Automated billing system for public utilities. Masters thesis, King Fahd University of Petroleum and Minerals.

(1998) Investigation of transient heat transfer in a rectangular packed duct with asymmetric heating. Masters thesis, King Fahd University of Petroleum and Minerals.

(1997) Geostatistical modeling of Safaniya reservoir in Safaniya field. Masters thesis, King Fahd University of Petroleum and Minerals.

(1993) Subjective assessment of indoor air quality in office buildings. Masters thesis, King Fahd University of Petroleum and Minerals.

(1995) Forced flow in the entry region of concentric annuli with impulsively rotated inner walls. Masters thesis, King Fahd University of Petroleum and Minerals.

(1994) Numerical simulation of groundwater depletion in Al-Hasa area. Masters thesis, King Fahd University of Petroleum and Minerals.

(1996) A Framework for yield enhancement of processor arrays. Masters thesis, King Fahd University of Petroleum and Minerals.

(1996) Optimization models for industrial process targeting. Masters thesis, King Fahd University of Petroleum and Minerals.

(1998) Null steering in partially adaptive arrays using genetic algorithms. Masters thesis, King Fahd University of Petroleum and Minerals.

(1997) A Study on the development of vehicular loding for design of highway bridges in Saudi Arabia. Masters thesis, King Fahd University of Petroleum and Minerals.

(1998) Investigation of speech coding algorithms for voice communication through personal computers. Masters thesis, King Fahd University of Petroleum and Minerals.

(2002) Dynamic similarity metric for case-based planning under imperfection. Masters thesis, King Fahd University of Petroleum and Minerals.

(1992) Flow injection spectrophotometric assay of tetracyclines in drug formulations. Masters thesis, King Fahd University of Petroleum and Minerals.

(2003) Efficient static test compaction algorithms for combinational circuits based on test relaxation. Masters thesis, King Fahd University of Petroleum and Minerals.

(1992) Factors affecting pseudo relative permeability curves. Masters thesis, King Fahd University of Petroleum and Minerals.

(2000) Modeling of adsorption-reaction phenomena on activated carbon. Masters thesis, King Fahd University of Petroleum and Minerals.

(1994) Solution properties of sidechain polymers for enhanced oil recovery. Masters thesis, King Fahd University of Petroleum and Minerals.

(1995) Application of H∞ optimization techniques in image & signal processing. Masters thesis, King Fahd University of Petroleum and Minerals.

(1994) The effect of signal coordination on interesection safety. PhD thesis, King Fahd University of Petroleum and Minerals.

(1995) An experimental study of oil recovery from tarmat reservoirs using hot water and solvent flooding. PhD thesis, King Fahd University of Petroleum and Minerals.

(1989) Dynamic economic dispatch with sensitivity analysis. Masters thesis, King Fahd University of Petroleum and Minerals.

(1998) Null steering in planar antenna arrays using genetic algorithms. Masters thesis, King Fahd University of Petroleum and Minerals.

(2003) Effect of quality on lotsizing, warranty and inventory control decisions. Masters thesis, King Fahd University of Petroleum and Minerals.

(1994) Control of hypersonic flight trajectories to minimize heat load. Masters thesis, King Fahd University of Petroleum and Minerals.

(1993) Chemical aspects of thermal instability in jet fuels from Saudi Arabian crude oils. Masters thesis, King Fahd University of Petroleum and Minerals.

(1996) Performance evaluation of a new type of titanium nitride (TiN) coated twist drill. Masters thesis, King Fahd University of Petroleum and Minerals.

(1996) Fuzzy logic-based PID self-tuning. Masters thesis, King Fahd University of Petroleum and Minerals.

(1998) Conjugate natural convection heat transfer in vertical coconcentric annuli. Masters thesis, King Fahd University of Petroleum and Minerals.

(1999) Robust congestion control for ATM's ABR service and design of a datalink layer interface library. Masters thesis, King Fahd University of Petroleum and Minerals.

(2000) Modeling of hydrodynamics and mass transfer in cocurrent packed columns. Masters thesis, King Fahd University of Petroleum and Minerals.

(1997) The Effect of retarder on gelation time and stability of polyacrylamide chromium (III) gel system. Masters thesis, King Fahd University of Petroleum and Minerals.

(2001) Conduction and non-conduction limited laser heating process- mathematical simulation. Masters thesis, King Fahd University of Petroleum and Minerals.

(1994) Performance evaluation of mobile communication systems. Masters thesis, King Fahd University of Petroleum and Minerals.

(1993) Channel characterization of radio links in the Southern Region of Saudi Arabia. Masters thesis, King Fahd University of Petroleum and Minerals.

(2003) Optimization of a packaged air conditioning unit performance using an experimentally validated CFD model. Masters thesis, King Fahd University of Petroleum and Minerals.

(1997) Measuring the coupling of imperative computer programs. Masters thesis, King Fahd University of Petroleum and Minerals.

(1996) Liquid-liquid extraction of some rare earth metal ions by polyoxyalkylene systems. Masters thesis, King Fahd University of Petroleum and Minerals.

(1996) A process miggration subsystem for distributed applications: design & implementation. Masters thesis, King Fahd University of Petroleum and Minerals.

(1994) Timing driven placement algorithm for standard-cell design. Masters thesis, King Fahd University of Petroleum and Minerals.

(2002) Finite element dynamic analysis of drillstring. Masters thesis, King Fahd University of Petroleum and Minerals.

(1997) Second-law-based thermoeconomic analysis and optimization of thermal-energy-storage systems. Masters thesis, King Fahd University of Petroleum and Minerals.

(1996) Investigation of optimization techniques for scheduling precedence computations with communication costs. Masters thesis, King Fahd University of Petroleum and Minerals.

(1990) Reliable life prediction models for various material damage processes. Masters thesis, King Fahd University of Petroleum and Minerals.

(1993) A complete inspection plan for critical components. Masters thesis, King Fahd University of Petroleum and Minerals.

(2000) Hydrogen bonding in polymer blends: effect on glass transition temperature. Masters thesis, King Fahd University of Petroleum and Minerals.

(2004) Hydrocracking catalysts for vacuum gas oil and de-metallized oil blend. Masters thesis, King Fahd University of Petroleum and Minerals.

(1996) Multimedia database systems: conceptual modeling. Masters thesis, King Fahd University of Petroleum and Minerals.

(1997) Adaptive filtering using the least-mean mixed-norms algorithm and its application to echo cancellation. Masters thesis, King Fahd University of Petroleum and Minerals.

(1990) Methanol conversion to light olefins over commercial zeolites. Masters thesis, King Fahd University of Petroleum and Minerals.

(2001) Nonlinear predictive control using genetic algorithms. Masters thesis, King Fahd University of Petroleum and Minerals.

(1995) Enhancement of AC transient stability through multiterminal DC (MTDC) systems. Masters thesis, King Fahd University of Petroleum and Minerals.

(1993) Extensions in multicharacteristics repeat inspection plans. Masters thesis, King Fahd University of Petroleum and Minerals.

(1992) Owners satisfaction with consultancy practices in Saudi Arabia. Masters thesis, King Fahd University of Petroleum and Minerals.

(2000) Heat and mass transfer analysis of liquid desiccant-air contact system in a gauze-type structured packing tower. Masters thesis, King Fahd University of Petroleum and Minerals.

(1995) Dataflow processor for back propagation nueral networks: architecture and performance evaluation. Masters thesis, King Fahd University of Petroleum and Minerals.

(1999) Modeling and simulation of a downer-type fluid catalytic cracking unit. Masters thesis, King Fahd University of Petroleum and Minerals.

(1990) The influence of owner involvement during construction process on projects quality. Masters thesis, King Fahd University of Petroleum and Minerals.

(1992) Software design language for concurrent distributed systems. Masters thesis, King Fahd University of Petroleum and Minerals.

(2002) Energy and exergy analyses of crude oil distillation plants. Masters thesis, King Fahd University of Petroleum and Minerals.

(1989) Evaluation of vertical multiphase flow correlations for Saudi Arabian field conditions. Masters thesis, King Fahd University of Petroleum and Minerals.

(2003) Entropy-constrained reflected residual vector quantization with application to image coding. Masters thesis, King Fahd University of Petroleum and Minerals.

(1998) Variable structure control of nonlinear systems. Masters thesis, King Fahd University of Petroleum and Minerals.

(1994) Hardware specific optimization on RTL description. Masters thesis, King Fahd University of Petroleum and Minerals.

(1992) Resonance excitation and electron capture by low charged ions. Masters thesis, King Fahd University of Petroleum and Minerals.

(1994) Analysis of the factors affecting the gelation time for polyacrylamide-redox system. Masters thesis, King Fahd University of Petroleum and Minerals.

(1990) Cyanoketene cycloaddition reactions. Masters thesis, King Fahd University of Petroleum and Minerals.

(1990) The Effect of injected water salinity on oil recovery. Masters thesis, King Fahd University of Petroleum and Minerals.

(1993) A Methodology for the high level design of object-oriented software. Masters thesis, King Fahd University of Petroleum and Minerals.

(1999) Performance of turbo codes under designed interleaving and puncturing conditions. Masters thesis, King Fahd University of Petroleum and Minerals.

(2000) Transient temperature distibution in a tubesheet of a fixed tubesheet heat exchanger. Masters thesis, King Fahd University of Petroleum and Minerals.

(1999) Improving standstone matrix stimulation for oil wells by gas preconditioning. Masters thesis, King Fahd University of Petroleum and Minerals.

(1996) SELF-MAP: stochastic evolution LUT-FPGA technology mapper. Masters thesis, King Fahd University of Petroleum and Minerals.

(1998) New single asymmetric error correcting codes. Masters thesis, King Fahd University of Petroleum and Minerals.

(2003) Theoretical analysis and simulation of immobilized enzyme reactors. Masters thesis, King Fahd University of Petroleum and Minerals.

(1998) Some acoustic wave problems in an inhomogeneous ocean. Masters thesis, King Fahd University of Petroleum and Minerals.

(1991) A study of graph coloring heuristics and its application to a time tabling problem in a registration and scheduling system. Masters thesis, King Fahd University of Petroleum and Minerals.

(1991) Numerical investigation of laminar natural convection flows in obstructed vertical channels. Masters thesis, King Fahd University of Petroleum and Minerals.

(2002) The effect of the gravitational mass on the electromagnetic radiation from an oblique, relativistically rotating dipole. Masters thesis, King Fahd University of Petroleum and Minerals.

(2000) High performance liquid chromatographic separation of some psychotherapeutic benzodiazepines with chemometrical optimization. Masters thesis, King Fahd University of Petroleum and Minerals.

(1992) Cycloaddition reactions of a heterocyclic nitrone. Masters thesis, King Fahd University of Petroleum and Minerals.

(1996) Bifurcation phenomena in non-isothermal reactive gas absorption. Masters thesis, King Fahd University of Petroleum and Minerals.

(1995) Design & Implementation of a 3D graphics system an interactive hierarchical modeling approach. Masters thesis, King Fahd University of Petroleum and Minerals.

(1993) Electron spini resonance studies of solute-solvent interaction in liquid-crystalline solvents. PhD thesis, King Fahd University of Petroleum and Minerals.

(1991) Join algorithms for parallel computers for relations based on interpolation based grid file. Masters thesis, King Fahd University of Petroleum and Minerals.

(1999) Optimal capacitor placement in distribution systems using heuristic techniques. Masters thesis, King Fahd University of Petroleum and Minerals.

(1996) Design of bandlimited, energy optimized data transmission filter. Masters thesis, King Fahd University of Petroleum and Minerals.

(1997) Finite element dynamic analysis of multibody rotor-bearing system with cracked shaft. PhD thesis, King Fahd University of Petroleum and Minerals.

(2001) Normalized time varying mixed norm LMS-LMF adaptive algorithm. Masters thesis, King Fahd University of Petroleum and Minerals.

(1996) Solution of the resource-constrained activity networks. Masters thesis, King Fahd University of Petroleum and Minerals.

(1997) Optimization of parabolic steel box arches. Masters thesis, King Fahd University of Petroleum and Minerals.

(1995) Heat transfer in eccentric annuli. PhD thesis, King Fahd University of Petroleum and Minerals.

(1989) A generalized theory for bending of thick isotropic rectangular plates. PhD thesis, King Fahd University of Petroleum and Minerals.

(1995) Elasto-plastic collapse load analysis of single mitred bends. Masters thesis, King Fahd University of Petroleum and Minerals.

(1992) Coupled bending torsional vibration of rotating shafts using finite element. Masters thesis, King Fahd University of Petroleum and Minerals.

(1991) A laser droppler anemometry study of the development of an initially turbulent flow in a horizontal tube. Masters thesis, King Fahd University of Petroleum and Minerals.

(2000) Acoustic and resistivity studies of the Khobar Member, the Dammam Formation, Eastern Province, Saudi Arabia. Masters thesis, King Fahd University of Petroleum and Minerals.

(2001) Quality of service routing. Masters thesis, King Fahd University of Petroleum and Minerals.

(2001) Effect of drilling fluid particle sizes on formation damage: application to horizontal well. Masters thesis, King Fahd University of Petroleum and Minerals.

(2001) Effect of gradation and testing procedures on the load carrying capacity of calcareous sediments. Masters thesis, King Fahd University of Petroleum and Minerals.

(1995) A groundwater velocity and dissolved oxygen on bioremediation of gasoline-contaminated sandy aquifers. PhD thesis, King Fahd University of Petroleum and Minerals.

(1993) Management of groundwater resources in Somalia. Masters thesis, King Fahd University of Petroleum and Minerals.

(1989) Characterization and treatment of a petrochemical wastewater for reuse. Masters thesis, King Fahd University of Petroleum and Minerals.

(1990) The Effect of multiple fractures on the performance of gas wells. Masters thesis, King Fahd University of Petroleum and Minerals.

(2001) Iterative algorithms for timing and low power driven VLSI standard-cell placement. Masters thesis, King Fahd University of Petroleum and Minerals.

(1996) Evaluation of empirically derived PVT properties for oil field brines. Masters thesis, King Fahd University of Petroleum and Minerals.

(1995) Use of small diameter cores in evaluation of in-situ concrete strength in Eastern Saudi Arabia. Masters thesis, King Fahd University of Petroleum and Minerals.

(1999) Characterization of molecular sieves by n-Hexane cracking. Masters thesis, King Fahd University of Petroleum and Minerals.

(2000) A system for prototyping optical architectures. Masters thesis, King Fahd University of Petroleum and Minerals.

(1990) A Load balancing algorithm for distributed computing systems. Masters thesis, King Fahd University of Petroleum and Minerals.

(2000) Error detection in algorithm-based fault tolerant systems. Masters thesis, King Fahd University of Petroleum and Minerals.

(2003) Synthesis and solution properties of some polysulfobetaines. Masters thesis, King Fahd University of Petroleum and Minerals.

(2001) Detection of high impedance faults using artificial neural networks. Masters thesis, King Fahd University of Petroleum and Minerals.

(1997) A Life cycle costing model for small reverse osmosis water treatment facilities. Masters thesis, King Fahd University of Petroleum and Minerals.

(1997) Application of multi-seismic attributes in estimating reservoir properties. Masters thesis, King Fahd University of Petroleum and Minerals.

(1994) An integrated stereo algorithm based on coarse-to-fine features and intensity values. Masters thesis, King Fahd University of Petroleum and Minerals.

(1993) Back-end design of a formal high level synthesis system. Masters thesis, King Fahd University of Petroleum and Minerals.

(2000) Acoustic wavefield in an inhomogeneous ocean. PhD thesis, King Fahd University of Petroleum and Minerals.

(2002) Noise and disorder effects on front propagation in non-linear media. Masters thesis, King Fahd University of Petroleum and Minerals.

(1996) Geology of the early paleogene phosphorite deposits of Northwestern Saudi Arabia. Masters thesis, King Fahd University of Petroleum and Minerals.

(1993) Priority-based scheduling and evaluation of precedence graphs with communication times. Masters thesis, King Fahd University of Petroleum and Minerals.

(2002) Some exact and approximate inverse boundary and scattering problems. PhD thesis, King Fahd University of Petroleum and Minerals.

(2001) A Study of corrosion control of mild steel using inhibitors under atmospheric conditions. Masters thesis, King Fahd University of Petroleum and Minerals.

(1995) Reliability-based maintenance strategies for heat exchanges subject to fouling. Masters thesis, King Fahd University of Petroleum and Minerals.

(1998) Priority-rating of public building maintenance work in Saudi Arabia. Masters thesis, King Fahd University of Petroleum and Minerals.

(2000) Behavior of laterally loaded pile group model in sand. Masters thesis, King Fahd University of Petroleum and Minerals.

(1998) Quality changes of secondary effluent as it passes through amended sand column. Masters thesis, King Fahd University of Petroleum and Minerals.

(1999) Transient response of varying thickness timoshenko beam under point load. Masters thesis, King Fahd University of Petroleum and Minerals.

(1997) Linear-phase modified duobinary data transmission filter. Masters thesis, King Fahd University of Petroleum and Minerals.

(1996) Integrated production, quality and maintenance models under various preventive maintenance policies. Masters thesis, King Fahd University of Petroleum and Minerals.

(1997) Unit commitment by artificial intelligence techniques. PhD thesis, King Fahd University of Petroleum and Minerals.

(1998) Heat convection from an oscillating cylinder. PhD thesis, King Fahd University of Petroleum and Minerals.

(1991) Geostatistical modelling of Zarghat magnesite deposit Saudi Arabia. Masters thesis, King Fahd University of Petroleum and Minerals.

(2000) Minority carrier injection in epitaxial schottky barrier diodes. Masters thesis, King Fahd University of Petroleum and Minerals.

(2004) Corrosion behavior of mild steel under atmospheric and accelerated conditions after treatment by several inhibitor solutions. Masters thesis, King Fahd University of Petroleum and Minerals.

(1995) Investigation of heat transfer in a rectangular packed duct with constant heat flux and asymmetrical wall temperatures. Masters thesis, King Fahd University of Petroleum and Minerals.

(1993) Floor finishing materials & systems: an expert system for evaluation and selection. Masters thesis, King Fahd University of Petroleum and Minerals.

(1994) Chloride diffusion in concrete/prediction of the onset of corrosion in reinforced concrete structures. Masters thesis, King Fahd University of Petroleum and Minerals.

(1998) Cancellation of grating lobes in scanned linear antenna arrays using genetic algorithm. Masters thesis, King Fahd University of Petroleum and Minerals.

(1995) Assessment of hydrogeological parameters from thin-section study of middle cretaceous sandstones. Masters thesis, King Fahd University of Petroleum and Minerals.

(2000) Decision feedback equalization using hybrid lattice-neural network structures. Masters thesis, King Fahd University of Petroleum and Minerals.

(1994) Assessment of the Problems facing the maintenance industry in Saudi Arabia. Masters thesis, King Fahd University of Petroleum and Minerals.

(2002) Performance modification of Saudi-asphalt binders using SABIC polymers. Masters thesis, King Fahd University of Petroleum and Minerals.

(1994) Method of lines analysis of Gaussian beam coupling to dielectric slab waveguide. Masters thesis, King Fahd University of Petroleum and Minerals.

(1996) An enhanced convex-elastic net technique for solving E-TSP. Masters thesis, King Fahd University of Petroleum and Minerals.

(2004) Impact testing of brittle materials using split hopkinson pressure bar technique. Masters thesis, King Fahd University of Petroleum and Minerals.

(2004) Designing a self-timed arithmetic logic unit. Masters thesis, King Fahd University of Petroleum and Minerals.

(1993) Voltammetric assays and behavior of norfloxacin and nalidixic acid antibacterial drugs. Masters thesis, King Fahd University of Petroleum and Minerals.

(1991) A multi-level invariant representation of digital images. Masters thesis, King Fahd University of Petroleum and Minerals.

(1991) Reliability studies of multireservoir system using stochastic approach. Masters thesis, King Fahd University of Petroleum and Minerals.

(1997) Real and reactive power wheeling cost based on the marginal cost theory. Masters thesis, King Fahd University of Petroleum and Minerals.

(1996) Protection of reinforced concrete using corrosion inhibitors and coatings. Masters thesis, King Fahd University of Petroleum and Minerals.

(1992) The design and implementation of a structured programming language for the description of optical architectures. Masters thesis, King Fahd University of Petroleum and Minerals.

(1991) Laser-induced ionization in calcium resonant and non-resonant effects. Masters thesis, King Fahd University of Petroleum and Minerals.

(2000) Differential electrolytic potentiometric detector in flow injection analysis. Masters thesis, King Fahd University of Petroleum and Minerals.

(1995) Effect of heat treatment on the flow induced corrosion of aluminum-SiC(p). Masters thesis, King Fahd University of Petroleum and Minerals.

(1989) Pedestrian behavior related to accident involvement. Masters thesis, King Fahd University of Petroleum and Minerals.

(2000) Effect of temperature on the fatigue behavior of plain weave woven carbon fabric-reinforced composite plastic. Masters thesis, King Fahd University of Petroleum and Minerals.

(2000) Optimal repeat inspection plan with several classifications. Masters thesis, King Fahd University of Petroleum and Minerals.

(1996) Studies of the terephthalic acid and dihydroxy diphenyl sulfone liquid crystalline copolymer and its composites. Masters thesis, King Fahd University of Petroleum and Minerals.

(2000) Incorporating the effects of gas slippage and non-darcy flow in the measurement of permeability using pressure pulse decay technique. Masters thesis, King Fahd University of Petroleum and Minerals.

(1999) Investigation of mixed mode crack initiation angles under different loading conditions. Masters thesis, King Fahd University of Petroleum and Minerals.

(1999) Topology design of enterprise networks. Masters thesis, King Fahd University of Petroleum and Minerals.

(2001) Analysis of metal-clad TM-pass polarizers using the method of lines. Masters thesis, King Fahd University of Petroleum and Minerals.

(1998) Distorted wave born approximation calculation of differential cross section of 14N(d,a)12C reaction below 1.3 MeV deuteron energies. Masters thesis, King Fahd University of Petroleum and Minerals.

(2000) The effect of unit cell size on the activity and selectivity of FCC catalysts. Masters thesis, King Fahd University of Petroleum and Minerals.

(1998) Investigation of horizontal well performance using Hele-Shaw model. Masters thesis, King Fahd University of Petroleum and Minerals.

(1998) Fuzzy logic based FPGA routing. Masters thesis, King Fahd University of Petroleum and Minerals.

(1997) Fate of secondary effluent flow through porous media. Masters thesis, King Fahd University of Petroleum and Minerals.

(1997) Design and performance evaluation of refrigeration systems using thermodynamic models. Masters thesis, King Fahd University of Petroleum and Minerals.

(1998) Performance optimization and modeling of slurry seal and micro surfacing utilizing steel slag aggregates. Masters thesis, King Fahd University of Petroleum and Minerals.

(1996) Cross section measurements of 13C(d, p) 14C reaction at sub-coulomb barrier energies. Masters thesis, King Fahd University of Petroleum and Minerals.

(2003) Economic production quantity models with variable production rates. Masters thesis, King Fahd University of Petroleum and Minerals.

(2000) An improved fractionally spaced decision feedback equalizer structure. Masters thesis, King Fahd University of Petroleum and Minerals.

(1994) Three dimensional finite element analysis of brittle materials using CDM model. Masters thesis, King Fahd University of Petroleum and Minerals.

(2002) Investigations of mixing in pipelines with side-, opposed-, and multiple-tees. Masters thesis, King Fahd University of Petroleum and Minerals.

(1998) Radiative and nonleptonic decays of bottom baryons in the quark model. Masters thesis, King Fahd University of Petroleum and Minerals.

(1991) Treatise on solute transport in porous media and its modeling for centration-dependent permeability. PhD thesis, King Fahd University of Petroleum and Minerals.

(1995) Removal of coliphage and bacteria through slow sand filtration. Masters thesis, King Fahd University of Petroleum and Minerals.

(1994) Genetic algorithm for timing influenced floorplanning of VLSI designs. Masters thesis, King Fahd University of Petroleum and Minerals.

(1996) Effect of thermal-hydraulic parameters on CaCO₃ scalling in heat exchangers. Masters thesis, King Fahd University of Petroleum and Minerals.

(2001) Fast wavelet transforms and seismic compression. PhD thesis, King Fahd University of Petroleum and Minerals.

(1996) An Ethernet bridge with packet filtering and statistics collection capabilities. Masters thesis, King Fahd University of Petroleum and Minerals.

(1996) Proposed methodology for designing the signal change interval. Masters thesis, King Fahd University of Petroleum and Minerals.

(1996) Numerical simulation of turbulent natural convection in enclosures. Masters thesis, King Fahd University of Petroleum and Minerals.

(1995) Boundary element analysis of nonprismatic beams and plates. Masters thesis, King Fahd University of Petroleum and Minerals.

(1993) Modelling and antiswing control of overhead cranes. Masters thesis, King Fahd University of Petroleum and Minerals.

(1995) Evaluation of correlations for natural gas compressibility factors. Masters thesis, King Fahd University of Petroleum and Minerals.

(1993) The effect of temperature and salt contamination on corrosion of reinforcing steel in OPC and blended cement concretes. Masters thesis, King Fahd University of Petroleum and Minerals.

(1990) Factors affecting the accuracy of construction costs estimating in Saudi Arabia. Masters thesis, King Fahd University of Petroleum and Minerals.

(2004) Study of natural convection from cylindrical surfaces embedded in porous media by LDCT. Masters thesis, King Fahd University of Petroleum and Minerals.

(2004) Design level coupling metrics for UML models. Masters thesis, King Fahd University of Petroleum and Minerals.

(2003) Metal incorporation in MCM-41 for hydrodesulfurization. Masters thesis, King Fahd University of Petroleum and Minerals.

(1989) Performance of Epoxy-injected concrete in hot weather conditions. Masters thesis, King Fahd University of Petroleum and Minerals.

(2002) Deactivation of dehydration adsorbents. PhD thesis, King Fahd University of Petroleum and Minerals.

(2001) Performance driven, low-power, standard VLSI cell placement using simulated evolution. Masters thesis, King Fahd University of Petroleum and Minerals.

(1994) Digitally programmable tuned circuits. Masters thesis, King Fahd University of Petroleum and Minerals.

(2001) Data integration in 3-D geostatistical porosity modeling of Hanifa Reservoir in Berri field, Saudi Arabia. Masters thesis, King Fahd University of Petroleum and Minerals.

(2001) A Two-dimensional geometric-shapes-based compression scheme for deterministic testing of systems-on-a-chip. Masters thesis, King Fahd University of Petroleum and Minerals.

(1994) A framework for the VLSI implementation of systolic tree based data structures. Masters thesis, King Fahd University of Petroleum and Minerals.

(2000) Performance evaluation of concrete coatings. Masters thesis, King Fahd University of Petroleum and Minerals.

(1997) Predicting short-duration, high-intensity rainfall in Saudi Arabia. Masters thesis, King Fahd University of Petroleum and Minerals.

(1994) Fourier descriptor approach for defect analysis in ultrasonic nondestructive evaluation. Masters thesis, King Fahd University of Petroleum and Minerals.

(1996) Development of a congestion control scheme for ATM networks. Masters thesis, King Fahd University of Petroleum and Minerals.

(2001) An efficient font design method. Masters thesis, King Fahd University of Petroleum and Minerals.

(2000) Assessment of HVAC systems design and operation for indoor air quality in Saudi Arabia. Masters thesis, King Fahd University of Petroleum and Minerals.

(1993) Steady state experimental evaluation of a Novel raney-Ni/PTFE gas diffusion electrode in an alkaline fuel cell. Masters thesis, King Fahd University of Petroleum and Minerals.

(1992) Second-law-based thermodynamic analysis of vapor-compression refrigeration cycles. Masters thesis, King Fahd University of Petroleum and Minerals.

(2000) A Geochemical investigation of a suite of Central Arabian crude oils. Masters thesis, King Fahd University of Petroleum and Minerals.

(2003) An investigation into the error performance of vertical-bell labs layered space-time architecture V-blast. Masters thesis, King Fahd University of Petroleum and Minerals.

(1992) VLSI implementation of petri net models of a class of digital systems. Masters thesis, King Fahd University of Petroleum and Minerals.

(1998) Fracture toughness investigation of an indigenous limestone rock formation. Masters thesis, King Fahd University of Petroleum and Minerals.

(1993) Weibull analysis of cutting tools and dies. Masters thesis, King Fahd University of Petroleum and Minerals.

(1999) Differential electrolytic potentiometric detector in flow injection analysis and in micro titration. Masters thesis, King Fahd University of Petroleum and Minerals.

(1996) Stabilization of Raney Nickel catalyst for fuel cell electrodes. Masters thesis, King Fahd University of Petroleum and Minerals.

(1989) Load induced cracking and failure of concrete deck slabs in girder-slab type bridges. Masters thesis, King Fahd University of Petroleum and Minerals.

(2001) Investigation of dynamic behavior of power system installed with statcom. Masters thesis, King Fahd University of Petroleum and Minerals.

(2000) Assessment of safety measures in the design of residential buildings in Saudi Arabia. Masters thesis, King Fahd University of Petroleum and Minerals.

(2003) Study of reaction kinetics of a submerged membrane activated sludge process. PhD thesis, King Fahd University of Petroleum and Minerals.

(1998) Evaluation and comparison of Ingternet firewalls. Masters thesis, King Fahd University of Petroleum and Minerals.

(1997) Evaluation of pipelined switch architectures for ATM networks. Masters thesis, King Fahd University of Petroleum and Minerals.

(1993) Investigation of the production performance of horizontal wells in fractured bottom water drive reservoirs. PhD thesis, King Fahd University of Petroleum and Minerals.

(1993) A paleomagnetic study of central Harrat Rahat, Western Saudi Arabia. Masters thesis, King Fahd University of Petroleum and Minerals.

(2002) Fractional calculus and some of its applications. Masters thesis, King Fahd University of Petroleum and Minerals.

(2004) Analysis of one and two dimensional bandgap structures using automated method of lines with arbitrary longitudinal discontinuities. Masters thesis, King Fahd University of Petroleum and Minerals.

(2002) Thermo-mechanical modeling of tool and workpiece interface in metal forming process. Masters thesis, King Fahd University of Petroleum and Minerals.

(1994) A clustering-based algorithm for the rectilinear steiner tree problem. Masters thesis, King Fahd University of Petroleum and Minerals.

(1997) Electron capture from hydrogenic systems by positrons and positive muons. Masters thesis, King Fahd University of Petroleum and Minerals.

(1997) Factors affecting construction costs in Saudi Arabia. Masters thesis, King Fahd University of Petroleum and Minerals.

(2000) Modeling and simulation of a combined isomerizaion reactor/pressures swing adsorption unit. Masters thesis, King Fahd University of Petroleum and Minerals.

(1998) Design of variable gain transimpedance preamplifier. Masters thesis, King Fahd University of Petroleum and Minerals.

(1992) All optical reflectivity modulation utilizing surface plasmon resonance. Masters thesis, King Fahd University of Petroleum and Minerals.

(1996) Modeling of transient gas-solid reactions in a fixed-based reactor. Masters thesis, King Fahd University of Petroleum and Minerals.

(1995) Experimental investigation of various physical factors affecting the stability of water-in-oil emulsions in oil production. Masters thesis, King Fahd University of Petroleum and Minerals.

(1993) An LP-based procedure for graph isomorphism. Masters thesis, King Fahd University of Petroleum and Minerals.

(2004) An implementation model for design-build (D-B) project delivery system. Masters thesis, King Fahd University of Petroleum and Minerals.

(1995) One dimensional coupled vibrating systems with control applied at the coupled points. Masters thesis, King Fahd University of Petroleum and Minerals.

(1990) Oil compressibility correlations. Masters thesis, King Fahd University of Petroleum and Minerals.

(2000) Study of the Stereochemical and reactivity phenomena of the addition reaction of 8-membered cyclic nitrone by NMR spectroscopy. Masters thesis, King Fahd University of Petroleum and Minerals.

(1996) Geostatistical evaluation of the Hazam al-Jalamid phosphorite deposit, Northwestern Saudi Arabia. Masters thesis, King Fahd University of Petroleum and Minerals.

(1997) Design and analysis of a fault-tolerant switch for B-ISDN. Masters thesis, King Fahd University of Petroleum and Minerals.

(1993) On the second smallest eigenvalue of the Laplacian. Masters thesis, King Fahd University of Petroleum and Minerals.

(1998) Computerized multiple criteria decision making model for projects planning and implementation. Masters thesis, King Fahd University of Petroleum and Minerals.

(2002) Conjugate free convection heat transfer in vertical eccentric annuli. Masters thesis, King Fahd University of Petroleum and Minerals.

(1997) EPR investigations of anisotropic interaction and cole-davidson parameters, novel phospholipids, and newly synthesized buckminsterfullerenes using nitroxide spin probes. PhD thesis, King Fahd University of Petroleum and Minerals.

(1993) Chronoamperometric evaluation of several organic corrosion inhibitors by the measurement of the hydrogen permeation flux. Masters thesis, King Fahd University of Petroleum and Minerals.

(1991) Measurement of differential cross section of ¹²C(d,p) reaction at E = 160 to 300 keV. Masters thesis, King Fahd University of Petroleum and Minerals.

(1992) Steady state multiplicity in gas-liquid CSTRs. Masters thesis, King Fahd University of Petroleum and Minerals.

(1997) Validation and improvement of rear-end traffic conflict model for safety evaluation of coordinated signal systems. Masters thesis, King Fahd University of Petroleum and Minerals.

(1991) Null steering in phased and adaptive arrays by controlling the element positions. PhD thesis, King Fahd University of Petroleum and Minerals.

(1992) Optimal assessment of using solar and wind power for desalination on the Eastern coast of Saudi Arabia. Masters thesis, King Fahd University of Petroleum and Minerals.

(2003) Multistream realtime control of a distributed telerobotic system. Masters thesis, King Fahd University of Petroleum and Minerals.

(2000) Crack propagation in CPVC at different temperatures. Masters thesis, King Fahd University of Petroleum and Minerals.

(2004) Xylene stransformation over Y zeolite in a fluidized-bed reactor. Masters thesis, King Fahd University of Petroleum and Minerals.

(1996) Microcontroller based unity power factor convertor. Masters thesis, King Fahd University of Petroleum and Minerals.

(1998) Numerical investigation of pulsating flows in abrupt expansion pipes. Masters thesis, King Fahd University of Petroleum and Minerals.

(1990) Unsteady state performance of porous gas-diffusion electrodes in alkaline fuel cell. Masters thesis, King Fahd University of Petroleum and Minerals.

(2000) A java based load balancing framework for network parallel applications. Masters thesis, King Fahd University of Petroleum and Minerals.

(1997) Removal of microorganisms through slow sand filtration of chlorinated vs. nonchlorinated secondary effluents. Masters thesis, King Fahd University of Petroleum and Minerals.

(2000) A study of protein partinioning in two phase aqueous solutions of random and multi-block capolymers. Masters thesis, King Fahd University of Petroleum and Minerals.

(1989) Use of microtubes in the design of optimized trickle irrigation network. Masters thesis, King Fahd University of Petroleum and Minerals.

(2002) An integrated geological modeling of the Arab-D reservoir, Uthmaniyah area Ghawar field. Masters thesis, King Fahd University of Petroleum and Minerals.

(1999) Spontaneous ignition characteristics of a super-light oil. Masters thesis, King Fahd University of Petroleum and Minerals.

(1993) Separation process for the recovery of desalted water and chemical products from indigenous saline water resources. PhD thesis, King Fahd University of Petroleum and Minerals.

(2003) Cost implications of architectural dlesign variables. Masters thesis, King Fahd University of Petroleum and Minerals.

(2001) Learning continuous functions using decision tree learning algorithms. Masters thesis, King Fahd University of Petroleum and Minerals.

(1996) Performance evaluation of concrete surface treatment materials. Masters thesis, King Fahd University of Petroleum and Minerals.

(1997) A Robust design methodology for structural control using piezoelectric materials. Masters thesis, King Fahd University of Petroleum and Minerals.

(1997) An aid to similar-characteristics-code clustering. Masters thesis, King Fahd University of Petroleum and Minerals.

(1991) Mechanisms of high durability performance of plain and blended cements. PhD thesis, King Fahd University of Petroleum and Minerals.

(1999) Torsional vibrations analysis of a synchronous motor-compressor drive train. Masters thesis, King Fahd University of Petroleum and Minerals.

(1995) A Formal VLSI parallel description and design environment. Masters thesis, King Fahd University of Petroleum and Minerals.

(1997) Performance evaluation of shell-and-tube heat exchangers: a numerical approach. Masters thesis, King Fahd University of Petroleum and Minerals.

(1997) Role of sodium chloride in low temperaturs hot corrosion of superalloys. Masters thesis, King Fahd University of Petroleum and Minerals.

(2004) Identification and control strategy applied in load management of residential air-conditioners. Masters thesis, King Fahd University of Petroleum and Minerals.

(2001) Investigation of heat and moisture transfer during solids drying. Masters thesis, King Fahd University of Petroleum and Minerals.

(1995) Runlength limited codes with error correction capabilities. Masters thesis, King Fahd University of Petroleum and Minerals.

(1995) Recovery performance and relative permeabilities of composite cores. Masters thesis, King Fahd University of Petroleum and Minerals.

(1992) Parallel optical architectures for some comparison-based problems. Masters thesis, King Fahd University of Petroleum and Minerals.

(1998) Fuzzy simulated evolution algorithm for VLSI cell placement. Masters thesis, King Fahd University of Petroleum and Minerals.

(2001) Spline-wavelets in numerical solutions of differential equations. Masters thesis, King Fahd University of Petroleum and Minerals.

(2001) A New dewpoint pressure correlation for gas-condensate systems. Masters thesis, King Fahd University of Petroleum and Minerals.

(1999) The Inverse problem of the calculus of variations: an operator-theoritic study. Masters thesis, King Fahd University of Petroleum and Minerals.

(2004) Optimal power flow with FACTS devices. Masters thesis, King Fahd University of Petroleum and Minerals.

(1997) Object modeling with conic splines. Masters thesis, King Fahd University of Petroleum and Minerals.

(1994) Intermediate forms in high-level synthesis. Masters thesis, King Fahd University of Petroleum and Minerals.

(1992) Hydrogen production by the electrolysis of saline water. Masters thesis, King Fahd University of Petroleum and Minerals.

(2000) Experimental investigation of hydrogen spillover on Co-Clay hydrotreating catalysts by noble metals. Masters thesis, King Fahd University of Petroleum and Minerals.

(1989) Investigation of leachate from a sanitary landfill in Saudi Arabia. Masters thesis, King Fahd University of Petroleum and Minerals.

(1996) Developing a price index for school projects in Saudi Arabia. Masters thesis, King Fahd University of Petroleum and Minerals.

(1995) Toward standardization of public building maintenance contracts in Saudi Arabia. Masters thesis, King Fahd University of Petroleum and Minerals.

(1998) Design and analysis of a high-performance fault-tolerant ATM network. Masters thesis, King Fahd University of Petroleum and Minerals.

(1996) Design for systems replacement in buildings. Masters thesis, King Fahd University of Petroleum and Minerals.

(1992) Hydrogeochemistry of Alat and Khobar aquifers in Eastern Saudi Arabia. Masters thesis, King Fahd University of Petroleum and Minerals.

(1997) Optimal design of multicharacteristic inspection plan udner inspection errors and statistical dependency. Masters thesis, King Fahd University of Petroleum and Minerals.

(1996) NMR study of nitrogen inversion and N-O bond rotation and anomeric effect in hydroxylamine derivatives. PhD thesis, King Fahd University of Petroleum and Minerals.

(1995) On the synthesis and optimization of MVL functions. Masters thesis, King Fahd University of Petroleum and Minerals.

(2002) Design of telerobotic system over a local area network (LAN). Masters thesis, King Fahd University of Petroleum and Minerals.

(1996) A Novel fast packet switch architecture for ATM networks. Masters thesis, King Fahd University of Petroleum and Minerals.

(1992) Flexure and shear behaviour of damaged RC beams repaired by plate bonding. Masters thesis, King Fahd University of Petroleum and Minerals.

(1992) Optimal design of reinforced concrete frames. Masters thesis, King Fahd University of Petroleum and Minerals.

(1991) Flavor conserving flavor changing radiative decays of vector mesons in Quark model. Masters thesis, King Fahd University of Petroleum and Minerals.

(1993) Modes of nonlinear optical fibers. PhD thesis, King Fahd University of Petroleum and Minerals.

(1993) Factors affecting quality of pavement construction in Saudi Arabia. Masters thesis, King Fahd University of Petroleum and Minerals.

(1990) Nickel and vanadyl porphyrins in Arabian heavy crude oil. Masters thesis, King Fahd University of Petroleum and Minerals.

(1994) Performance analysis of digital modulation schemes used in mobile radio. Masters thesis, King Fahd University of Petroleum and Minerals.

(1995) Modeling of groundwater flow system in Wadi Al-Miyah area, Eastern Saudi Arabia. Masters thesis, King Fahd University of Petroleum and Minerals.

(1999) Effect of formation damage on horizontal well performance. Masters thesis, King Fahd University of Petroleum and Minerals.

(1992) Biological treatment of hazardous contaminants in sequencing batch reacors. Masters thesis, King Fahd University of Petroleum and Minerals.

(1995) Timing driven global routing for standard cell design. Masters thesis, King Fahd University of Petroleum and Minerals.

(1994) An expert system for load flow planning. Masters thesis, King Fahd University of Petroleum and Minerals.

(2000) Effect of a hydraulic fracture on the performance of a layered gas condensate reservoir. Masters thesis, King Fahd University of Petroleum and Minerals.

(1993) Built-in self test logic for a histogrammer memory chip. Masters thesis, King Fahd University of Petroleum and Minerals.

(1996) A Load balancing framework for distributed and parallel applications. Masters thesis, King Fahd University of Petroleum and Minerals.

(2000) Application of pulse-decay technique to characterize whole cores. Masters thesis, King Fahd University of Petroleum and Minerals.

(2000) Mixture models for dense fluids and polymers. Masters thesis, King Fahd University of Petroleum and Minerals.

(1994) Analysis of the ionized field around HVDC transmission lines. PhD thesis, King Fahd University of Petroleum and Minerals.

(2002) Investigating smart classroom acoustics utilizing computer modeling. Masters thesis, King Fahd University of Petroleum and Minerals.

(2002) Evaluation of load transfer in axially loaded repaired concrete columns. Masters thesis, King Fahd University of Petroleum and Minerals.

(2001) Code acquisition technique using adaptive filters in wireless communication. Masters thesis, King Fahd University of Petroleum and Minerals.

(1980) Dearomatization of naphtha cuts from Saudi Arabian crudes using different selective solvents. Masters thesis, King Fahd University of Petroleum and Minerals.

(1996) A Study of rheology and interfacial activity of amphiphilic block copolymers for enhanced oil recovery. Masters thesis, King Fahd University of Petroleum and Minerals.

(1999) Conjugate forced convection heat transfer in eccentric annuli. Masters thesis, King Fahd University of Petroleum and Minerals.

(1990) Determining velocity, temperature and occupancy comfort within a 3-D room. Masters thesis, King Fahd University of Petroleum and Minerals.

(1991) Characerization of expansive soils in the Eastern Province of Saudi Arabia. Masters thesis, King Fahd University of Petroleum and Minerals.

(1993) An expert system for concrete diagnosis. Masters thesis, King Fahd University of Petroleum and Minerals.

(1985) Synthesis, spectroscopic studies and structure of gold (III) chloride compounds of heterocyclic N-oxide diadducts revealing short hydrogen bond. Masters thesis, King Fahd University of Petroleum and Minerals.

(1984) Comparison of binary sorption of propane and N-butane on 5A and 13X Zeolites. Masters thesis, King Fahd University of Petroleum and Minerals.

(1997) Non-catalytic partial oxidation of sour natural gas. Masters thesis, King Fahd University of Petroleum and Minerals.

(1998) Harmonic analysis of no-load current in distribution transformers. Masters thesis, King Fahd University of Petroleum and Minerals.

(1996) Pressure transient behavior of a well in anisotropic reservoir intersected by multiple fractures. Masters thesis, King Fahd University of Petroleum and Minerals.

(1994) A Parametric study of water-coning in horizontal wells. Masters thesis, King Fahd University of Petroleum and Minerals.

(1996) Analysis of turbulent transport properties in the near field of an isothermal free jet. Masters thesis, King Fahd University of Petroleum and Minerals.

(1985) Microcomputer based interactive process identification package. Masters thesis, King Fahd University of Petroleum and Minerals.

(1985) Implementation of an isolated word recognition system. Masters thesis, King Fahd University of Petroleum and Minerals.

(1987) Power system generation reliability. Masters thesis, King Fahd University of Petroleum and Minerals.

(1994) Sedimentology and geochemistry of Qurayyah Sabkha, Eastern Saudi Arabia. Masters thesis, King Fahd University of Petroleum and Minerals.

(1998) A Hardware model of an expandable RSA cryptographic system. Masters thesis, King Fahd University of Petroleum and Minerals.

(1989) The final set of mesomorphic and entire functions. Masters thesis, King Fahd University of Petroleum and Minerals.

(1998) Assesment of the geotechnical properties of stabilized sand-marl mixtures for constructional purposes. Masters thesis, King Fahd University of Petroleum and Minerals.

(1992) Evaluation of contract administration for public projects in Saudi Arabia. Masters thesis, King Fahd University of Petroleum and Minerals.

(1988) Study of various repair methods for reinforced concrete flexural members. Masters thesis, King Fahd University of Petroleum and Minerals.

(1998) Capacity of slotted ALOHA under Nakagami fading. Masters thesis, King Fahd University of Petroleum and Minerals.

(1997) Equipment management policy of major construction contractors in the Eastern Province of Saudi Arabia. Masters thesis, King Fahd University of Petroleum and Minerals.

(1998) A virtual distributed computing system. Masters thesis, King Fahd University of Petroleum and Minerals.

(1997) Higher-order statistics (HOS)-based deconvolution for ultrasonic nondestructive evaluation (NDE) of materials. Masters thesis, King Fahd University of Petroleum and Minerals.

(1997) Quantitative determination of tetraalkyllead by lead-207 nuclear magnetic resonance. Masters thesis, King Fahd University of Petroleum and Minerals.

(1999) An overview of the construction industry in the Kingdom of Saudi Arabia, 1390AH-1415AH (1970-1995). Masters thesis, King Fahd University of Petroleum and Minerals.

(1995) Delay in the Construction of public utility projects in Saudi Arabia. Masters thesis, King Fahd University of Petroleum and Minerals.

(1992) On a neural network-based fault detection algorithm. Masters thesis, King Fahd University of Petroleum and Minerals.

(1995) Evaluation of work sampling as an indicator of construction labor productivity. Masters thesis, King Fahd University of Petroleum and Minerals.

(1993) ¹⁵N and ¹³C NMR studies of the interaction of cyanide ion with gold (I) drugs. Masters thesis, King Fahd University of Petroleum and Minerals.

(1988) Investigation and implementation of some probabilistic algorithms. Masters thesis, King Fahd University of Petroleum and Minerals.

(2004) Transient impulsive flow about a sphere in a gas stream. Masters thesis, King Fahd University of Petroleum and Minerals.

(2003) Investigation of structural stability and vibrational spectra of some organizations. Masters thesis, King Fahd University of Petroleum and Minerals.

(2001) Evaluation of the construction equipment replacement policies of construction contractors in the Eastern Province of Saudi Arabia. Masters thesis, King Fahd University of Petroleum and Minerals.

(1992) Strengthening of damaged reinforced concrete beams by external fiber glass plates. Masters thesis, King Fahd University of Petroleum and Minerals.

(1985) Geological, mineralogical and geostatistical studies on Zarghat magnesite deposit, Saudi Arabia. Masters thesis, King Fahd University of Petroleum and Minerals.

(1988) Multipath fading effects on digital microwave links and countermeasures. Masters thesis, King Fahd University of Petroleum and Minerals.

(1987) Data-flow expression evaluator for VLSI implementation. Masters thesis, King Fahd University of Petroleum and Minerals.

(1994) Successive shortest path algorithms for a class of network problem. Masters thesis, King Fahd University of Petroleum and Minerals.

(1998) Development of mechanical works' assembly cost data model for residential buildings in Saudi Arabia. Masters thesis, King Fahd University of Petroleum and Minerals.

(1988) Geotechnical properties of the surfacial soil of Sana'a The Yemen Arab Republic. Masters thesis, King Fahd University of Petroleum and Minerals.

(1989) Code generation for dHAD on Vax. Masters thesis, King Fahd University of Petroleum and Minerals.

(2003) Numerical study of volterra difference equations of the second kind. Masters thesis, King Fahd University of Petroleum and Minerals.

(1992) Fatigue life predictions of notched members in Arabian Gulf Water. Masters thesis, King Fahd University of Petroleum and Minerals.

(1985) Search for isobaric analogue states in ⁵⁷Co via the reaction⁵⁶Fe (p,y)⁵⁷Co. Masters thesis, King Fahd University of Petroleum and Minerals.

(1997) Current conveyor-based universal filter and oscillator. Masters thesis, King Fahd University of Petroleum and Minerals.

(1997) Optimization of horizontal well completion : (position, length and perforation scenarios). Masters thesis, King Fahd University of Petroleum and Minerals.

(2001) Dynamic response of fluid-loaded composite plates to stationary and moving loads. Masters thesis, King Fahd University of Petroleum and Minerals.

(1985) Concrete mix design for hot weather. Masters thesis, King Fahd University of Petroleum and Minerals.

(1996) An experimental investigation of heat transfer in the thermally developing region of a pulsating pipe flow. Masters thesis, King Fahd University of Petroleum and Minerals.

(1982) The Influence function technique in the numerical analysis of plate bending of arbitrary plan form. Masters thesis, King Fahd University of Petroleum and Minerals.

(1980) Microcomputer control system for programmable logic array burn-in. Masters thesis, King Fahd University of Petroleum and Minerals.

(1988) Watson's Lemma with applications. Masters thesis, King Fahd University of Petroleum and Minerals.

(1996) On the spectral limit points of graphs. Masters thesis, King Fahd University of Petroleum and Minerals.

(1987) Phase behavior and microemulsion studies on a Saudi Arabian crude. Masters thesis, King Fahd University of Petroleum and Minerals.

(1987) A new transformation and design technique for switched capacitor high pass ladder filters. Masters thesis, King Fahd University of Petroleum and Minerals.

(1997) On the residual stress measurements in Y-based superconductor. Masters thesis, King Fahd University of Petroleum and Minerals.

(2000) On the quadratic assignment problem and its extensions. PhD thesis, King Fahd University of Petroleum and Minerals.

(1997) Mathematical models for quality in multistage production systems. PhD thesis, King Fahd University of Petroleum and Minerals.

(1990) Feasibility & development of an Arabic/English computer-aided detailed estimating system. Masters thesis, King Fahd University of Petroleum and Minerals.

(1988) Integral methods for transpired boundary layer flow. Masters thesis, King Fahd University of Petroleum and Minerals.

(1994) Development of empirical equations for water-oil relative permeability. Masters thesis, King Fahd University of Petroleum and Minerals.

(1995) Timing driven floorplanning. Masters thesis, King Fahd University of Petroleum and Minerals.

(1999) Effect of liquid rop-out on the productivity of a rich gas condensate reservoir. Masters thesis, King Fahd University of Petroleum and Minerals.

(1996) Fatigue damage characterization and life prediction in carbon fiber reinforced plastic composites. Masters thesis, King Fahd University of Petroleum and Minerals.

(1995) Design, modeling, and VLSI implementation of a RISC dataflow array processor. Masters thesis, King Fahd University of Petroleum and Minerals.

(1997) Quality management practices among A/E organizations. Masters thesis, King Fahd University of Petroleum and Minerals.

(2003) Identification and control of a class of nonlinear systems. Masters thesis, King Fahd University of Petroleum and Minerals.

(1992) Binary separations by pressure swing adsorption processes. PhD thesis, King Fahd University of Petroleum and Minerals.

(1990) Spectral estimation based on singular value decomposition techniques. Masters thesis, King Fahd University of Petroleum and Minerals.

(1996) Component selection and pipelining using stochastic evolution. Masters thesis, King Fahd University of Petroleum and Minerals.

(1979) A Comoputer-assisted analysis for thermodynamic processes and cycles. Masters thesis, King Fahd University of Petroleum and Minerals.

(1982) Design of solarimeter. Masters thesis, King Fahd University of Petroleum and Minerals.

(2001) Sulfide stress cracking of dissimilar metal welds. Masters thesis, King Fahd University of Petroleum and Minerals.

(1998) Reservoir formation facies identification using decision tree learning. Masters thesis, King Fahd University of Petroleum and Minerals.

(1989) Spectral characterization of trees. Masters thesis, King Fahd University of Petroleum and Minerals.

(1994) Partitioning and mapping nested loops on message-passing multiprocessors. Masters thesis, King Fahd University of Petroleum and Minerals.

(1981) Two dimensional mathematical model of evacuated tubular solar collector. Masters thesis, King Fahd University of Petroleum and Minerals.

(2003) A Study of tensile and microhardness properties of m-LLDPE/LDPE blends. Masters thesis, King Fahd University of Petroleum and Minerals.

(1989) Vibration analysis of point and column supported mindlin plates. Masters thesis, King Fahd University of Petroleum and Minerals.

(2001) The Cognitive self-structuring connectionist machine. Masters thesis, King Fahd University of Petroleum and Minerals.

(2003) Performance evaluation of (HVOF) thermal spray coating using INCONEL-625 powder. Masters thesis, King Fahd University of Petroleum and Minerals.

(1992) Development a DSP-32C based electrocardiograph machine using microcomputers. Masters thesis, King Fahd University of Petroleum and Minerals.

(1984) Packed-bed adsorption of phenol and 2, 4 dichlorophenoxy acetic acid on the macroreticular resin XAD-7. Masters thesis, King Fahd University of Petroleum and Minerals.

(1993) Experimental investigation of microbial growth in subsurface environment. Masters thesis, King Fahd University of Petroleum and Minerals.

(2000) Iterative coupling of boundary and finite element methods. PhD thesis, King Fahd University of Petroleum and Minerals.

(1995) Bond and durability of fusion-bonded epoxy-coated steel bars. Masters thesis, King Fahd University of Petroleum and Minerals.

(1991) Feasibility of Adobe as a construction material : a case study. Masters thesis, King Fahd University of Petroleum and Minerals.

(1998) Magnetic and scaling properties of Yba2Cu408 high-temperature superconductor. Masters thesis, King Fahd University of Petroleum and Minerals.

(2002) Khafji reservoir mechanical properties calibration and in-situ stress modeling, Zuluf field, Eastern Saudi Arabia. Masters thesis, King Fahd University of Petroleum and Minerals.

(1999) Measuring inheritance coupling in object-oriented systems. Masters thesis, King Fahd University of Petroleum and Minerals.

(1994) Design of an Alkaline/Surfactant/Polymer enhanced oil recovery scheme for a Saudi Arabian limestone reservoir. Masters thesis, King Fahd University of Petroleum and Minerals.

(1980) A Study on the performance of delta modulation systems. Masters thesis, King Fahd University of Petroleum and Minerals.

(1985) A Study of copper recovery by liquid membrane containing a chelating agent. Masters thesis, King Fahd University of Petroleum and Minerals.

(1987) Construction financing in Saudi Arabia. Masters thesis, King Fahd University of Petroleum and Minerals.

(1986) Microprocesser based analog speech Scrambler/descrambler. Masters thesis, King Fahd University of Petroleum and Minerals.

(1996) Polymer modification of Arab Asphalt to Suit Gulf Countries' performance requirements. PhD thesis, King Fahd University of Petroleum and Minerals.

(2000) Change orders in construction projects in Saudi Arabia. Masters thesis, King Fahd University of Petroleum and Minerals.

(1997) An experimental investigation for the effect of pulsation on heat transfer characteristics in pipes. Masters thesis, King Fahd University of Petroleum and Minerals.

(1996) Kinetic studies and methods of analysis of some compounds of analytical interest utilizing sequential injection analysis technique. Masters thesis, King Fahd University of Petroleum and Minerals.

(1998) Harmonic analysis of no-load current in distribution transformers. Masters thesis, King Fahd University of Petroleum and Minerals.

(1990) Durability of reinforced concrete beams repaired with various repair materials. Masters thesis, King Fahd University of Petroleum and Minerals.

(1992) A fault independent test generation method for combinational logic circuits. Masters thesis, King Fahd University of Petroleum and Minerals.

(1979) Elementary divisors over rings. Masters thesis, King Fahd University of Petroleum and Minerals.

(1998) Effects of blending MTBE, methanol, or ethanol with gasoline on performance and exhaust emissions of SI engines. Masters thesis, King Fahd University of Petroleum and Minerals.

(1991) H°° state-feedback with closed-loop transfer recovery (H°° /CLTR) design method. Masters thesis, King Fahd University of Petroleum and Minerals.

(1996) Design and analysis of a hierarchical, fault tolerant, multicomputer network. Masters thesis, King Fahd University of Petroleum and Minerals.

(1975) Corrosion of steel in the Arabian environment. Masters thesis, King Fahd University of Petroleum and Minerals.

(1995) Oxygen Stoichiometry effect on magnetic properties of Yba₂Cu₃O₇_δ superconductor. Masters thesis, King Fahd University of Petroleum and Minerals.

(1993) Laser spectroscopy of 3A2 -> 1A1 phosphorescence of sulphur dioxide. Masters thesis, King Fahd University of Petroleum and Minerals.

(1999) Measuring the effectiveness of materials management for industrial construction projects in Saudi Arabia. Masters thesis, King Fahd University of Petroleum and Minerals.

(1990) Temperature dependent angle-resolved photoemission study of the valence bands of single crystal iridium. Masters thesis, King Fahd University of Petroleum and Minerals.

(1988) Pleistocene-holocene sedimentation along King fahd Causeway between Saudi Arabia and Bahrain. Masters thesis, King Fahd University of Petroleum and Minerals.

(1997) Zincosilicates with MFI-structure; synthesis, characterization, and catalytic evaluation. Masters thesis, King Fahd University of Petroleum and Minerals.

(1990) Radio frequency spread spectrum for distributed control systems. Masters thesis, King Fahd University of Petroleum and Minerals.

(1988) A Systolic algorithm for VLSI design of a viterbi decoder. Masters thesis, King Fahd University of Petroleum and Minerals.

(0011) Performance modeling of a computer system Saudi Arabian Ministry of Interior online system. Masters thesis, King Fahd University of Petroleum and Minerals.

(1997) Optimal control of nonlinear plants using artificial neural networks. Masters thesis, King Fahd University of Petroleum and Minerals.

(1996) Comparison of accepted procedures for determining schedule and cost impact. Masters thesis, King Fahd University of Petroleum and Minerals.

(1988) Uppeer semicontinuous decompositions E3 into subarc's of Bing's sling and points. Masters thesis, King Fahd University of Petroleum and Minerals.

(1988) Globally stable adaptive pole placement. PhD thesis, King Fahd University of Petroleum and Minerals.

(1998) Two improved lossless image compression methods. Masters thesis, King Fahd University of Petroleum and Minerals.

(2003) Monitoring fluid fron movement using permanent resistivity arrays. Masters thesis, King Fahd University of Petroleum and Minerals.

(2000) Modeling of a nonisothermal tubular reactor packed with immobilized enzyme systems. Masters thesis, King Fahd University of Petroleum and Minerals.

(1995) Reliability equivalents for AC adequacy evaluation of large power systems. Masters thesis, King Fahd University of Petroleum and Minerals.

(1983) Robust decentralized L.F.C. with online iteraction trajectory improvement. Masters thesis, King Fahd University of Petroleum and Minerals.

(1995) Analysis of packed bed biofilm reactor under single and multiple substrate utilization. Masters thesis, King Fahd University of Petroleum and Minerals.

(2003) Investigation of degradation of NBR and HNBR elastomers by light scattering rheology and molecular dynamics techniques. Masters thesis, King Fahd University of Petroleum and Minerals.

(1988) Generation outage dynamic contingency analysis using frequency prediction. Masters thesis, King Fahd University of Petroleum and Minerals.

(1994) Design of composite die for wire drawing. Masters thesis, King Fahd University of Petroleum and Minerals.

(1990) Vibration frequencies of rotating tapered beam including rotary inertia and transverse shear deformation. Masters thesis, King Fahd University of Petroleum and Minerals.

(1982) Design and analysis of the automated meteorological system for the Kingdom of Saudi Arabia. Masters thesis, King Fahd University of Petroleum and Minerals.

(1997) Assessment of application of life cycle cost on construction projects. Masters thesis, King Fahd University of Petroleum and Minerals.

(1990) Studying the behavior of Dhahran dune sand using the 3rd invariant stress dependent combined hardening cap model. Masters thesis, King Fahd University of Petroleum and Minerals.

(1999) Safety performance measuremnts: a PC-basd evaluation tool for industrial contractors in Saudi Arabia. Masters thesis, King Fahd University of Petroleum and Minerals.

(1998) Elastic plastic analysis of semi-rigid industrial frames. PhD thesis, King Fahd University of Petroleum and Minerals.

(1990) Assessment of concrete strength by lok and capo tests. Masters thesis, King Fahd University of Petroleum and Minerals.

(1995) Optimization of continuous counter current adsorption systems. Masters thesis, King Fahd University of Petroleum and Minerals.

(2001) Parallel genetic scheduling for parallel applications. Masters thesis, King Fahd University of Petroleum and Minerals.

(2001) Reliability analysis of ATM network with error control. Masters thesis, King Fahd University of Petroleum and Minerals.

(1997) Fuzzy optimal control. Masters thesis, King Fahd University of Petroleum and Minerals.

(2004) Photophysical behavior of 1,8-diaminonaphthalene in acidic aqueous solutions and in zeolite sieves. Masters thesis, King Fahd University of Petroleum and Minerals.

(1996) Numerical modeling of RC slabs on tensionless elastic subgrade. Masters thesis, King Fahd University of Petroleum and Minerals.

(1998) A Conceptual model for consultant selection in Saudi Arabia. Masters thesis, King Fahd University of Petroleum and Minerals.

(1993) An area efficient FPGA: Design using non volatile RAM. Masters thesis, King Fahd University of Petroleum and Minerals.

(1994) The Galerkin method for singular nonoscillatory two-point boundary value problems. PhD thesis, King Fahd University of Petroleum and Minerals.

(1995) Dynamic modeling and analysis of axially moving beam with prismatic and revolute joints. PhD thesis, King Fahd University of Petroleum and Minerals.

(1992) Optimal shunt compensators at nonlinear busbars. Masters thesis, King Fahd University of Petroleum and Minerals.

(1992) Experimental determination of heat transfer coefficient for water-lithium bromide mixture. Masters thesis, King Fahd University of Petroleum and Minerals.

(1997) Digital filter design using LMI based techniques. Masters thesis, King Fahd University of Petroleum and Minerals.

(1997) Design of 1-D and 2-D IIR digital filters using IRLS technique. Masters thesis, King Fahd University of Petroleum and Minerals.

(2000) Analysis and design of buried pipelines. Masters thesis, King Fahd University of Petroleum and Minerals.

(1997) Quantifying crude oil spill volume in homogeneous and layered porous media from product thickness in monitoring wells. Masters thesis, King Fahd University of Petroleum and Minerals.

(1992) Modeling of fluidised-bed reactors; generalisation of the Werther model. Masters thesis, King Fahd University of Petroleum and Minerals.

(2001) Multicast routing protocol with partial flooding for ad hoc wireless networks. Masters thesis, King Fahd University of Petroleum and Minerals.

(2004) Reductive lie groups and mostow fibration. Masters thesis, King Fahd University of Petroleum and Minerals.

(2002) Electropolymerization of pyrrole on mild steel for corrosion protection. Masters thesis, King Fahd University of Petroleum and Minerals.

(1994) Liability allocation among the parties to fixed-price construction contracts in Saudi Arabia. Masters thesis, King Fahd University of Petroleum and Minerals.

(1993) Causes of contractors' failures in Saudi Arabia. Masters thesis, King Fahd University of Petroleum and Minerals.

(2005) Finite element analysis of stick-slip vibrations in drillstrings. Masters thesis, King Fahd University of Petroleum and Minerals.

(1998) Bayesian prediction for the multiple linear regression model with first order auto-correlation. Masters thesis, King Fahd University of Petroleum and Minerals.

(2001) Safety assessment of industrial construction projects in Saudi Arabia. Masters thesis, King Fahd University of Petroleum and Minerals.

(2005) Facts-based stabilizers for power system stability enhancement. Masters thesis, King Fahd University of Petroleum and Minerals.

(1993) Ergonomic design of a Barber's workstation. Masters thesis, King Fahd University of Petroleum and Minerals.

(2006) Optimization of ideal reactive distillation column using hybrid PSO algorithm. Masters thesis, King Fahd University of Petroleum and Minerals.

(1995) Neocognitron: application to the handwritten Hindi numerals. Masters thesis, King Fahd University of Petroleum and Minerals.

(1993) A Study of translational diffusion constants of paramagnetic species in solution. Masters thesis, King Fahd University of Petroleum and Minerals.

(1995) Laboratory evaluation of hedmanite and lime modified asphalt concrete mixes. Masters thesis, King Fahd University of Petroleum and Minerals.

(1994) Developing a concrete cost estimating model for small residential buildings. Masters thesis, King Fahd University of Petroleum and Minerals.

(2000) Analysis of laminated general shells undergoing finite rotations and large motion. PhD thesis, King Fahd University of Petroleum and Minerals.

(1999) Depositional environments and provenance of the Wajid Sandstone, Abha-Khamis Mushayt area, Southwestern Saudi Arabia. Masters thesis, King Fahd University of Petroleum and Minerals.

(1994) Adsorption of light gases and their mixtures on SR-115 and ETS-10 Zeolites. Masters thesis, King Fahd University of Petroleum and Minerals.

(1999) Design and performance evaluation of evaporative cooling towers. Masters thesis, King Fahd University of Petroleum and Minerals.

(2002) Fouling analysis and its mitigation in heat exchangers. PhD thesis, King Fahd University of Petroleum and Minerals.

(1994) Energy and exergy analysis of Ghazlan Power Plant. Masters thesis, King Fahd University of Petroleum and Minerals.

(2001) The Effect of temperature dependent viscosity variation on the performance of heat exchangers. Masters thesis, King Fahd University of Petroleum and Minerals.

(1993) An expert system for designing hydrodynamic journal bearings. Masters thesis, King Fahd University of Petroleum and Minerals.

(2003) Performance evaluation of interrupt handling schemes in gigabit network. Masters thesis, King Fahd University of Petroleum and Minerals.

(2005) Ant colony multi-optimization algorithm for circuit bi-partitioning. Masters thesis, King Fahd University of Petroleum and Minerals.

(2001) New mechanisms for improved adaptive routing in wormhole networks. Masters thesis, King Fahd University of Petroleum and Minerals.

(2005) Development and testing of an artificial neural network model for predicting bottomhole pressure in vertical multiphase flow. Masters thesis, King Fahd University of Petroleum and Minerals.

(2002) Scheduling courses in a university. Masters thesis, King Fahd University of Petroleum and Minerals.

(2002) Wakel flow with varying separatin points. PhD thesis, King Fahd University of Petroleum and Minerals.

(2005) A prediction model for the residual flexural strength of corroded reinforced concrete beams. Masters thesis, King Fahd University of Petroleum and Minerals.

(1996) Chemical stabilization of Al-Qurrayyah Eastern Saudi Sabkha soil. Masters thesis, King Fahd University of Petroleum and Minerals.

(2006) Impact of variability of Nakagami-m parameter on the performance of digital communication systems. Masters thesis, King Fahd University of Petroleum and Minerals.

(1997) Model-based controller design for a continuous pulping reactor. Masters thesis, King Fahd University of Petroleum and Minerals.

(2006) A framework for a reliable and fault-tolerant network management architecture. Masters thesis, King Fahd University of Petroleum and Minerals.

(2004) Design of robust PSS and facts-based controllers for stability enhancement of power systems. Masters thesis, King Fahd University of Petroleum and Minerals.

(1996) Experimental investigation of biofilter parameters. Masters thesis, King Fahd University of Petroleum and Minerals.

(1996) Unsteady hydrodynamic forces on spheroidal bodies. PhD thesis, King Fahd University of Petroleum and Minerals.

(1992) Numerical simulation of groundwater in the Umm Er Radhuma Aquifer at Shadco project - Eastern Province. Masters thesis, King Fahd University of Petroleum and Minerals.

(2003) The Production of activated carbon from local palm-date pits for pollution removal process. Masters thesis, King Fahd University of Petroleum and Minerals.

(1991) Ideal extension of E-Bisimple semigroup theorems. Masters thesis, King Fahd University of Petroleum and Minerals.

(2002) Oxidation/carburization behavior of high temperature alloys. Masters thesis, King Fahd University of Petroleum and Minerals.

(1994) On the blow-up by comparison. Masters thesis, King Fahd University of Petroleum and Minerals.

(1992) Unsteady natural convection in open ended vertical concentric annuli. Masters thesis, King Fahd University of Petroleum and Minerals.

(1999) On the performance of turbo codes over Rayleigh fading channels. Masters thesis, King Fahd University of Petroleum and Minerals.

(1995) Prediction of shear/peeling failure in plated R/C beams. Masters thesis, King Fahd University of Petroleum and Minerals.

(1996) Contractors quality systems-assessment to the ISO 9000 standard. Masters thesis, King Fahd University of Petroleum and Minerals.

(1995) Assessment, prediction and enhancement of the reliability of extrusion dies. Masters thesis, King Fahd University of Petroleum and Minerals.

(2003) Critical success factor for different project objectives. Masters thesis, King Fahd University of Petroleum and Minerals.

(1995) Evaluation of thermal resistivity of soils in Saudi Arabia. Masters thesis, King Fahd University of Petroleum and Minerals.

(1996) Routing in multicomputer netwroks: a classifcation and comparison. Masters thesis, King Fahd University of Petroleum and Minerals.

(2001) Null steering and pattern control in smart antenna arrays. Masters thesis, King Fahd University of Petroleum and Minerals.

(1992) Experimental investigations of the vortex flow behind a circular cone at high angles of attack. Masters thesis, King Fahd University of Petroleum and Minerals.

(1994) Construction productivity awareness and improvement programs in Saudi Arabia. Masters thesis, King Fahd University of Petroleum and Minerals.

(1993) Computerized conceptual-cost-estimating system for domestic water supply projets. Masters thesis, King Fahd University of Petroleum and Minerals.

(2001) Automatic scheduling of substation maintenance outages. Masters thesis, King Fahd University of Petroleum and Minerals.

(1996) Performance modeling of Arabian asphalt using HP-GPC chromatography. PhD thesis, King Fahd University of Petroleum and Minerals.

(2003) Channel estimation in OFDM systems. Masters thesis, King Fahd University of Petroleum and Minerals.

(2003) Transiently developing free and opposing jets in relation to gas-assisted laser evaporative heating process. Masters thesis, King Fahd University of Petroleum and Minerals.

(1998) Robust networks modeling and scheduling. Masters thesis, King Fahd University of Petroleum and Minerals.

(2006) Growth of uniform layers of nanosized zeolites on 3D ordered macroporous carbon: synthesis, characterization, and catalytic evaluation. Masters thesis, King Fahd University of Petroleum and Minerals.

(2005) Efficacy of contractor prequalification models. Masters thesis, King Fahd University of Petroleum and Minerals.

(2005) Effect of piezoelectric actuator placement on controlling the modes of vibration for flexible structures. Masters thesis, King Fahd University of Petroleum and Minerals.

(2003) Influence of molecular parameters on the miscibility of metallocene LLDPE and HDPE blends: rheological and molecular dynamics simulation investigation. Masters thesis, King Fahd University of Petroleum and Minerals.

(1995) Computational Modelling of shrinkage in repaired concrete. Masters thesis, King Fahd University of Petroleum and Minerals.

(1994) Computer utilization by construction contractors in Saudi Arabia. Masters thesis, King Fahd University of Petroleum and Minerals.

(1993) Finite space direct and inverse problem in quantum Mechanical scattering theory using the born approximation. Masters thesis, King Fahd University of Petroleum and Minerals.

(2006) Experimental and numerical analyses of mixed mode crack initiation angle. Masters thesis, King Fahd University of Petroleum and Minerals.

(2003) Effects of aggregate quality on reinforcement corrosion. Masters thesis, King Fahd University of Petroleum and Minerals.

(1994) Scheduling and allocation in high-level synthesis using genetic algorithm. Masters thesis, King Fahd University of Petroleum and Minerals.

(1990) Pattern matching and applications. Masters thesis, King Fahd University of Petroleum and Minerals.

(1988) A generalized approach to the machining economics optimization. Masters thesis, King Fahd University of Petroleum and Minerals.

(2002) Industrial plants reliability evaluation. Masters thesis, King Fahd University of Petroleum and Minerals.

(2000) Generalization of formal concept analysis to fuzzy contexts: application for knowledge extraction. Masters thesis, King Fahd University of Petroleum and Minerals.

(1988) Performance study of the lowest bidder bid awarding system in government projects - Saudi Arabia. Masters thesis, King Fahd University of Petroleum and Minerals.

(1996) Analysis of fluid flow and heat transfer around and inside a liquid sphere. PhD thesis, King Fahd University of Petroleum and Minerals.

(1997) The Role of asphaltenes, resins and other solids in the stabilization of water in oil emulsions and its effect on oil production in Saudi oil fields. Masters thesis, King Fahd University of Petroleum and Minerals.

(2004) Pade approximants technique for the analysis of waveguide junctions and beam splitters. Masters thesis, King Fahd University of Petroleum and Minerals.

(2000) Efficient algorithm for collision detection and path planning for robotics application. Masters thesis, King Fahd University of Petroleum and Minerals.

(1982) A Study of development and performance of sulphur-based construction blocks. Masters thesis, King Fahd University of Petroleum and Minerals.

(1994) Self tuning control of nonlinear systems: a meural net based approach. Masters thesis, King Fahd University of Petroleum and Minerals.

(1984) Effects of hydrogen sulfide, ammonia and water on catalytic hydrogenation of propylbenzene. Masters thesis, King Fahd University of Petroleum and Minerals.

(1998) Synthesis, solution properties and NMR spectroscopy of some polybetaines. Masters thesis, King Fahd University of Petroleum and Minerals.

(2005) Design of microstrip linear phased array antenna using integrated array feeder. Masters thesis, King Fahd University of Petroleum and Minerals.

(1996) Waterproofing of roofs of residential buildings in Saudi Arabia. Masters thesis, King Fahd University of Petroleum and Minerals.

(1987) Investigation of nitrogen compound types in high-boiling petroleum distillates form Saudi Arabian crude oils. Masters thesis, King Fahd University of Petroleum and Minerals.

(1984) On the propagation of electromagnetic waves in an inhomogeneous medium. Masters thesis, King Fahd University of Petroleum and Minerals.

(1987) Development of guidelines for four phase traffic signal scheme in the Kingdom of Saudi Arabia. Masters thesis, King Fahd University of Petroleum and Minerals.

(1985) Static strength properties of artificially cemented sands. Masters thesis, King Fahd University of Petroleum and Minerals.

(2004) Studies on soil-foundation interaction in the Sabkha environment of Eastern Saudi Arabia. Masters thesis, King Fahd University of Petroleum and Minerals.

(1996) Magnetic field management in underground cables. Masters thesis, King Fahd University of Petroleum and Minerals.

(2001) Weibull reliability analysis and maintenance strategies of rotating equipment. Masters thesis, King Fahd University of Petroleum and Minerals.

(1996) Effects of oily sludge landforming on the soils environment. Masters thesis, King Fahd University of Petroleum and Minerals.

(2003) Natural convection flow in parallel-plate vertical channels. Masters thesis, King Fahd University of Petroleum and Minerals.

(1988) Dispersion of chloroform in a saturated porous media. Masters thesis, King Fahd University of Petroleum and Minerals.

(2004) Numerical investigations of flow in a partially packed vessel. Masters thesis, King Fahd University of Petroleum and Minerals.

(1990) Modelling of chemical kinetics of methane/nitrogen dioxide/oxygen flames. Masters thesis, King Fahd University of Petroleum and Minerals.

(2000) Onset voltage of corona on coated conductors. Masters thesis, King Fahd University of Petroleum and Minerals.

(2000) Analysis of anti-resonant reflecting optical waveguide grating using the method of lines. Masters thesis, King Fahd University of Petroleum and Minerals.

(1980) A Three-dimensional photoelastic investigation of the stress distribution in the anchorage zone of post-tensioned beams. Masters thesis, King Fahd University of Petroleum and Minerals.

(1996) The effect of casting and curing temperatures on the properties of concrete. Masters thesis, King Fahd University of Petroleum and Minerals.

(1995) Effect of captive riders in intercity mode-choice modeling. Masters thesis, King Fahd University of Petroleum and Minerals.

(1995) Architectures for arithmetic operations in Galois Fileds GF(2m). Masters thesis, King Fahd University of Petroleum and Minerals.

(1995) Computational study of the flowfield through a cascade of NACA 0012 Airfoils. Masters thesis, King Fahd University of Petroleum and Minerals.

(1978) A Robust univariate procedure for testing symmetry and normality. Masters thesis, King Fahd University of Petroleum and Minerals.

(1992) Studies on soil-foundation interaction in the sabkha environment of Eastern Province of Saudi Arabia. PhD thesis, King Fahd University of Petroleum and Minerals.

(1985) Studies on the evaluation of permeability and corrosion resisting characteristics of Portland pozzolan concrete. Masters thesis, King Fahd University of Petroleum and Minerals.

(2003) Air conditioners performance using soft starter. Masters thesis, King Fahd University of Petroleum and Minerals.

(1995) Characterization and stabilization of Eastern Saudi Marls. Masters thesis, King Fahd University of Petroleum and Minerals.

(2004) A Pose invariant face recognition system using subspace techniques. Masters thesis, King Fahd University of Petroleum and Minerals.

(1994) The relationship of fee structure in engineering offices and design deficiency. Masters thesis, King Fahd University of Petroleum and Minerals.

(1992) Numerical simulation of ice crystal growth (initial frosting process). Masters thesis, King Fahd University of Petroleum and Minerals.

(1997) Assessment of safety level in performing building maintenance work in Saudi Arabia. Masters thesis, King Fahd University of Petroleum and Minerals.

(2002) Development of an equivalent dispersion coefficient for a complex contaminant transport model. Masters thesis, King Fahd University of Petroleum and Minerals.

(2003) License plate recognition system. Masters thesis, King Fahd University of Petroleum and Minerals.

(1988) A retrieval and display system for the holy Quran. Masters thesis, King Fahd University of Petroleum and Minerals.

(2005) Calibration of VISSIM to the traffic conditions of Khobar and Dammam, Saudi Arabia. Masters thesis, King Fahd University of Petroleum and Minerals.

(2002) Channel modeling and perforamce analysis of directive wideband Nakagami fading channels. Masters thesis, King Fahd University of Petroleum and Minerals.

(1991) Thermal insulation economics for Saudi residential buildings. Masters thesis, King Fahd University of Petroleum and Minerals.

(2005) Symmetry solutions of some nonlinear PDE's. Masters thesis, King Fahd University of Petroleum and Minerals.

(2004) Potential impact of the WTO on Saudi construction firms. Masters thesis, King Fahd University of Petroleum and Minerals.

(1994) Development of an expert system for evaluating the environmental quality of office buildings. Masters thesis, King Fahd University of Petroleum and Minerals.

(2000) Cyclopolymerization of unsaturated quaternary piperazinium compounds. Masters thesis, King Fahd University of Petroleum and Minerals.

(2004) Performance of punctured space-time codes over wireless channels and their applications. Masters thesis, King Fahd University of Petroleum and Minerals.

(2004) Laboratory study on precipitation of calcium sulphate in berea sandstone cores. Masters thesis, King Fahd University of Petroleum and Minerals.

(1994) Effects of diversity combining, coding and equalization on digital microcellular mobile communication systems. Masters thesis, King Fahd University of Petroleum and Minerals.

(2003) Chain transfer agents: characterization and their use in polymerization reactions. PhD thesis, King Fahd University of Petroleum and Minerals.

(2001) Multiselection on some interconnection networks. Masters thesis, King Fahd University of Petroleum and Minerals.

(1998) New joint time-frequency transforms with improved properties. PhD thesis, King Fahd University of Petroleum and Minerals.

(1993) Digital filter design by approximate time-domain modeling. Masters thesis, King Fahd University of Petroleum and Minerals.

(1998) New algorithms for H-norm approximation and applications. PhD thesis, King Fahd University of Petroleum and Minerals.

(1994) Application of artificail neural networks to optical character recognition. Masters thesis, King Fahd University of Petroleum and Minerals.

(1995) Synthesis, modification and catalytic evaluation of high-silica zeolites. PhD thesis, King Fahd University of Petroleum and Minerals.

(2006) An analytical simulator for deploying IP telephony. Masters thesis, King Fahd University of Petroleum and Minerals.

(1982) Analysis of turbulent, axisymmetric, dense jets discharged to quiescent, uniform or stratified ambients. Masters thesis, King Fahd University of Petroleum and Minerals.

(1994) Design and modeling of a real-time RISC processor in VHDL. Masters thesis, King Fahd University of Petroleum and Minerals.

(2003) Simulation of a simulated moving bed reactor for hydrocarbon isomerization. Masters thesis, King Fahd University of Petroleum and Minerals.

(1988) Investigations on a flat, square plate at high incidence in a low speed flow. Masters thesis, King Fahd University of Petroleum and Minerals.

(2002) Use of vibrator performance data to improve near-surface velocity determination. Masters thesis, King Fahd University of Petroleum and Minerals.

(2001) Identification of Hammerstein and Wiener models using radial basis functions neural networks. Masters thesis, King Fahd University of Petroleum and Minerals.

(1999) Parameter estimation in Wiener-Hammerstein models. Masters thesis, King Fahd University of Petroleum and Minerals.

(1996) Mixed convection from an elliptic tube placed in a fluctuating free stream. PhD thesis, King Fahd University of Petroleum and Minerals.

(2005) Handling imprecision and uncertainty in software quality models. Masters thesis, King Fahd University of Petroleum and Minerals.

(1987) Adsorption of surfactants on Saudi Arabian limestone. Masters thesis, King Fahd University of Petroleum and Minerals.

(1984) Stochastic approach for modeling machining process variables. Masters thesis, King Fahd University of Petroleum and Minerals.

(2003) Closed loop identification for model predictive control: a case study. Masters thesis, King Fahd University of Petroleum and Minerals.

(2000) Null-steering in planar arrays by phase perturbations using genetic algorithms. Masters thesis, King Fahd University of Petroleum and Minerals.

(1997) Integrated production, quality and maintenance models for multistage production-inventory systems. Masters thesis, King Fahd University of Petroleum and Minerals.

(1987) Tertiary wastewater treatment by sedimantation and sand filtration. Masters thesis, King Fahd University of Petroleum and Minerals.

(1994) Analysis of the ionized field around multi-phase power transmission lines. PhD thesis, King Fahd University of Petroleum and Minerals.

(1988) Engineering properties and mineralogical composition of expansive clays in Al-Qatif area (K.S.A). Masters thesis, King Fahd University of Petroleum and Minerals.

(1981) Effect of speed control humps on vehicle dynamics. Masters thesis, King Fahd University of Petroleum and Minerals.

(2004) Assessment of automating facilities management current practices: potential framework models for Saudi Arabian Universities. Masters thesis, King Fahd University of Petroleum and Minerals.

(1996) 13C, 15N and 31P NMR study of the scrambling and the redox reactions of some gold(I) complexes. PhD thesis, King Fahd University of Petroleum and Minerals.

(1990) The Effect of high temperature and aging on water-base drilling fluids. Masters thesis, King Fahd University of Petroleum and Minerals.

(2004) Impulsive dynamic boundary value problems on time scales. Masters thesis, King Fahd University of Petroleum and Minerals.

(1998) Identification and classification of helicopters using neural nets. Masters thesis, King Fahd University of Petroleum and Minerals.

(2005) Synthesis and characterization of composite polymeric membranes for proton exchange membrane (PEM) fuel cell applications. Masters thesis, King Fahd University of Petroleum and Minerals.

(1999) Interface frictional characteristics of non-woven geotextile - Sabkha and - sand using pull-out tests. Masters thesis, King Fahd University of Petroleum and Minerals.

(1994) Assessment of the onset condition of upward streamers from energized Franklin rods. Masters thesis, King Fahd University of Petroleum and Minerals.

(1997) Performance of biofilters under non-isothermal conditions. Masters thesis, King Fahd University of Petroleum and Minerals.

(1993) Modeling of biological wastewater treatment in sequencing batch reactors. Masters thesis, King Fahd University of Petroleum and Minerals.

(1985) Heat convection from a horizontal cylinder in a quiescent fluid. Masters thesis, King Fahd University of Petroleum and Minerals.

(2005) Effect of outflow orientation and multiple jets orifice plate configurations on heat transfer in a rectangular duct. Masters thesis, King Fahd University of Petroleum and Minerals.

(1997) Liquid desiccant and its application for pipeline drying. Masters thesis, King Fahd University of Petroleum and Minerals.

(1995) Modeling of Multicomponent gas-solid reactions. Masters thesis, King Fahd University of Petroleum and Minerals.

(1985) Kinetic study of ethylene oxidation using silver catalyst in a Berty reactor. Masters thesis, King Fahd University of Petroleum and Minerals.

(2003) Adaptive forward error correction coding for diversity communication systems. Masters thesis, King Fahd University of Petroleum and Minerals.

(1991) Factors affecting mercury capillary pressure measurements. Masters thesis, King Fahd University of Petroleum and Minerals.

(1991) Criteria for cathodic protection of steel in concrete in the context of Arabian Gulf environment. PhD thesis, King Fahd University of Petroleum and Minerals.

(1983) Homomorphic analysis and synthesis of speech generated by an all-pole model. Masters thesis, King Fahd University of Petroleum and Minerals.

(1979) Biparabolic isoparametric shell element : (a version of Ahmad element). Masters thesis, King Fahd University of Petroleum and Minerals.

(1996) Role of parity violating Hamiltonian in-non-relativistic quark model for non-leptonic hyperon weak transitions. Masters thesis, King Fahd University of Petroleum and Minerals.

(2005) Evaluation of empirically derived PVT properties for Nigerian crude oils. Masters thesis, King Fahd University of Petroleum and Minerals.

(1996) Three-dimensional transient temperature analysis of friction welding of cylindrical bars. Masters thesis, King Fahd University of Petroleum and Minerals.

(1985) On a class of inverted distributions. Masters thesis, King Fahd University of Petroleum and Minerals.

(2005) A study of mix design and durability of self compacting concrete. Masters thesis, King Fahd University of Petroleum and Minerals.

(2000) Synthesis and application of acrylamide based multi-block copolymers in separation of proteins. Masters thesis, King Fahd University of Petroleum and Minerals.

(2004) A model for benchmarking contractors project management elements in Saudi Arabia. Masters thesis, King Fahd University of Petroleum and Minerals.

(1978) Optimization of Concrete strength using local aggregates from the Eastern Province of Saudi Arabia. Masters thesis, King Fahd University of Petroleum and Minerals.

(1980) The Applications of microcomputers for vehicular traffic control. Masters thesis, King Fahd University of Petroleum and Minerals.

(1996) The Designing of objects using rational splines with shape control. Masters thesis, King Fahd University of Petroleum and Minerals.

(1993) Identification of coherent generators using linear trajectory. Masters thesis, King Fahd University of Petroleum and Minerals.

(2000) An Investigation of corrosion of steel reinforcement in concrete in the Eastern Province of Saudi Arabia. Masters thesis, King Fahd University of Petroleum and Minerals.

(1996) On learning better decision trees. Masters thesis, King Fahd University of Petroleum and Minerals.

(2003) Preparation and characterization of polypropylene/palm fiber composites. Masters thesis, King Fahd University of Petroleum and Minerals.

(1995) A novel architecture for switched-capacitor FIR filters. Masters thesis, King Fahd University of Petroleum and Minerals.

(1993) Effect of dissolved oxygen on activated carbon uptake. PhD thesis, King Fahd University of Petroleum and Minerals.

(1989) An LPC analysis and synthesis system for Arabic speech. Masters thesis, King Fahd University of Petroleum and Minerals.

(1987) Removal of iron and manganese with ozone. Masters thesis, King Fahd University of Petroleum and Minerals.

(1988) Parking problem of Arafat. Masters thesis, King Fahd University of Petroleum and Minerals.

(1990) Design of state feedback control laws based on reduced order models. Masters thesis, King Fahd University of Petroleum and Minerals.

(1987) Experiments on a flat square plate at high angles of attack. Masters thesis, King Fahd University of Petroleum and Minerals.

(1992) Effect of dissolved oxygen on the adsorptive capacity of a granular activated charcoal for phenol and O-Cresol. Masters thesis, King Fahd University of Petroleum and Minerals.

(1996) Hybrid liquid desiccant based air-conditioning system. Masters thesis, King Fahd University of Petroleum and Minerals.

(2003) Laser induced photocatalytic conversion of methane into methanol. PhD thesis, King Fahd University of Petroleum and Minerals.

(1982) Electrical resistivity of concrete in relation to corrosion of reinforcement. Masters thesis, King Fahd University of Petroleum and Minerals.

(2000) Detection of a transverse crack in a rotating shaft using wavelet transform. Masters thesis, King Fahd University of Petroleum and Minerals.

(1988) Analysis of horizontally curved pseudo slab type bridge deck continuous over discrete pier supports. Masters thesis, King Fahd University of Petroleum and Minerals.

(1998) Performance evaluation of I-Q trellis codes over frequency-selective fading channels. Masters thesis, King Fahd University of Petroleum and Minerals.

(1997) Fuzzy genetic algorithm for VLSI floorplan design. Masters thesis, King Fahd University of Petroleum and Minerals.

(2000) An experimental investigation of stall characteristics in a vaneless diffuser. PhD thesis, King Fahd University of Petroleum and Minerals.

(1996) Analysis of turbulent transport properties in a swirling flow of a Can-type combustor. Masters thesis, King Fahd University of Petroleum and Minerals.

(1995) Numerical discussion of the time domain inverse scattering problem for wave equation. Masters thesis, King Fahd University of Petroleum and Minerals.

(1982) Software reliability modelling and evaluation via Markov and semi-Markov processes. Masters thesis, King Fahd University of Petroleum and Minerals.

(1988) Equilibrium adsorption of light alkanes and their mixtures at high pressure on 5A, 13X and S-115 adsorbents. Masters thesis, King Fahd University of Petroleum and Minerals.

(1989) Tertiary treatment of municipal sewage via slow sand filtration. Masters thesis, King Fahd University of Petroleum and Minerals.

(1987) Effect of sight distance on the safety of unsignalized intersections. Masters thesis, King Fahd University of Petroleum and Minerals.

(2001) Effect of intermetallic phases on corrosion of Aluminum-Silicon Carbide (Al-SiCp) composites. Masters thesis, King Fahd University of Petroleum and Minerals.

(1996) A parsing algorithm for iconic visual programming languages. Masters thesis, King Fahd University of Petroleum and Minerals.

(1995) Computerized AHP model for solving Bid/no-Bid decision problem. Masters thesis, King Fahd University of Petroleum and Minerals.

(1985) Multiple access schemes for data communications. Masters thesis, King Fahd University of Petroleum and Minerals.

(1993) A parallel list scheduling algorithm: design and performance. Masters thesis, King Fahd University of Petroleum and Minerals.

(1985) Recycling of deteriorated asphalt pavements. Masters thesis, King Fahd University of Petroleum and Minerals.

(2002) Synthesis, characterization and NMR studies of some gold(I) and silver(I) complexes with cyanide, thiones and selenones. PhD thesis, King Fahd University of Petroleum and Minerals.

(2005) Modelling of blood flow in a time-varying shape passage. Masters thesis, King Fahd University of Petroleum and Minerals.

(1984) The Riemann-Steiltjes integration in locally compact spaces. Masters thesis, King Fahd University of Petroleum and Minerals.

(1993) Comparative study of different methods of vibration control of rotor bearing systems. Masters thesis, King Fahd University of Petroleum and Minerals.

(1991) Systematic examination techniques for planning and scheduling among Saudi Arabian construction firms. Masters thesis, King Fahd University of Petroleum and Minerals.

(1985) Reduced order models for synchronous machines. Masters thesis, King Fahd University of Petroleum and Minerals.

(1979) Peak load forecast for Saudi Arabia electric power generation, 1978-2000. Masters thesis, King Fahd University of Petroleum and Minerals.

(1991) Towards an optimal accumulator size for the Hough transform. Masters thesis, King Fahd University of Petroleum and Minerals.

(1999) Catalytic chain transfer polymerization of methacrylates and styrene. Masters thesis, King Fahd University of Petroleum and Minerals.

(2005) Implementation and validation of object-oriented design-level cohesion metrics. Masters thesis, King Fahd University of Petroleum and Minerals.

(1987) Geostatistical estimation of reserves in the Abu-Tartur phosphate deposits western desert, Egypt. Masters thesis, King Fahd University of Petroleum and Minerals.

(1986) Analytical calculation of bow shock waves from delta shaped supersonic lifting wings. Masters thesis, King Fahd University of Petroleum and Minerals.

(2006) Contaminant behavior and distribution in mechanically ventilated multi-zone building. Masters thesis, King Fahd University of Petroleum and Minerals.

(1992) Lithofacies and diagenetic study of the Uthmaniyah Arab-D limestone member (Ghawar oil field). Masters thesis, King Fahd University of Petroleum and Minerals.

(1989) Joint Ventures in construction firms in Saudi Arabia. Masters thesis, King Fahd University of Petroleum and Minerals.

(2006) Interference testing using horizontal wells in anisotropic reservoirs. Masters thesis, King Fahd University of Petroleum and Minerals.

(1993) Design of an echo canceller for acoustic halls. Masters thesis, King Fahd University of Petroleum and Minerals.

(2002) Evolutionary techniques for multi-objective VLSI netlist partitioning. Masters thesis, King Fahd University of Petroleum and Minerals.

(1992) Performance of multistage interconnection networks under non-uniform reference model. Masters thesis, King Fahd University of Petroleum and Minerals.

(1985) Speaker recognition using orthogonal LPC parameters in noisy environment. Masters thesis, King Fahd University of Petroleum and Minerals.

(1988) Concurrency in interpolation based grid files. Masters thesis, King Fahd University of Petroleum and Minerals.

(1990) Factors affecting bidding and markup decisions in Saudi Arabia. Masters thesis, King Fahd University of Petroleum and Minerals.

(1989) Photoinitiated polymerization by phosphonium salts incorporating a chromophore unit. Masters thesis, King Fahd University of Petroleum and Minerals.

(1992) A finite difference approximation for a class of singular boundary value problems. PhD thesis, King Fahd University of Petroleum and Minerals.

(2005) Synthesis of 2-imino-2-oxo-1,3,2-oxazaphosphorinanes. Masters thesis, King Fahd University of Petroleum and Minerals.

(2004) Cost effective design of conventional type distribution transformer using optimization techniques. Masters thesis, King Fahd University of Petroleum and Minerals.

(1997) Developing behavioral models for driver gap acceptance at priority intersections. PhD thesis, King Fahd University of Petroleum and Minerals.

(1997) Organization of parallel memories. Masters thesis, King Fahd University of Petroleum and Minerals.

(2003) Some aspects of statistical quality control using ranked set sampling. Masters thesis, King Fahd University of Petroleum and Minerals.

(1982) Buckling of multiple braced columns. Masters thesis, King Fahd University of Petroleum and Minerals.

(1981) Spectral representation of the love wave operator. Masters thesis, King Fahd University of Petroleum and Minerals.

(1981) Measurements on wall turbulence. Masters thesis, King Fahd University of Petroleum and Minerals.

(1978) On Gleason spaces. Masters thesis, King Fahd University of Petroleum and Minerals.

(1995) AutoVLSI system: a layout system for general-cell VLSI design. Masters thesis, King Fahd University of Petroleum and Minerals.

(1997) Convective heat transfer characteristics in the rectangular packed beds with asymmetric heating. Masters thesis, King Fahd University of Petroleum and Minerals.

(1998) Localization and delocalization studies in one dimensional electronic disordered systems. Masters thesis, King Fahd University of Petroleum and Minerals.

(1988) Hydrogen transfer cracking of Arabian vacuum residuum in tetralin. Masters thesis, King Fahd University of Petroleum and Minerals.

(2000) Neural network based nonlinear blind equalization schmes for high order M-ary QAM signals. Masters thesis, King Fahd University of Petroleum and Minerals.

(1996) A new enhanced binary ghost canceling reference signal for TV ghosts. Masters thesis, King Fahd University of Petroleum and Minerals.

(2003) Removal of heavy metal ions using a novel integrated electrolytic-electrodialytic process. Masters thesis, King Fahd University of Petroleum and Minerals.

(1996) Programmable current mirrors: design and applications. Masters thesis, King Fahd University of Petroleum and Minerals.

(2002) Plastic shrinkage cracking of blended cement concretes under hot weather conditions. Masters thesis, King Fahd University of Petroleum and Minerals.

(1991) Non-linear finite element modelling of reinforced concrete slabs. PhD thesis, King Fahd University of Petroleum and Minerals.

(2006) Evaluation of consultant performance. Masters thesis, King Fahd University of Petroleum and Minerals.

(2000) Modeling and control of stand-alone and parallel operating diesel generators. Masters thesis, King Fahd University of Petroleum and Minerals.

(1998) Design and construction of a liquid incinerator; a novel method for fast chemical measurements and feedback control. PhD thesis, King Fahd University of Petroleum and Minerals.

(1997) Intelligent techniques approach to power systems identification and control. PhD thesis, King Fahd University of Petroleum and Minerals.

(1991) Contractor prequalification : a computerized model for public projects in Bahrain. Masters thesis, King Fahd University of Petroleum and Minerals.

(1988) Fracture and permeability characteristics of thermally degraded concrete. Masters thesis, King Fahd University of Petroleum and Minerals.

(2003) Causes of female teacher work trip accidents in the Kingdom of Saudi Arabia. Masters thesis, King Fahd University of Petroleum and Minerals.

(1981) The effects of baghouse fines and mineral fillers on asphalt mix properties in the Eastern Province of Saudi Arabia. Masters thesis, King Fahd University of Petroleum and Minerals.

(1997) A methodology for the optimization of rolling process. Masters thesis, King Fahd University of Petroleum and Minerals.

(2002) Analysis and application of evanescent field enhancement in multi-layer arrow waveguide. Masters thesis, King Fahd University of Petroleum and Minerals.

(2001) A Web-based automatic outline capturing of images. Masters thesis, King Fahd University of Petroleum and Minerals.

(2000) Protective effects of substituted 1 (Benzyl) 1-H- 1,2,3 triazole compounds on the dissolution of iron in HCI solution. Masters thesis, King Fahd University of Petroleum and Minerals.

(1996) Magnetic energy losses and pinning forces in Y1Ba2Cu3O7/Ag2O high- Tc superconductor. Masters thesis, King Fahd University of Petroleum and Minerals.

(1993) Quality management ativities in design and construction phases in Saudi Arabia. Masters thesis, King Fahd University of Petroleum and Minerals.

(1995) Reliability of modular fault-tolerant hypercube networks. Masters thesis, King Fahd University of Petroleum and Minerals.

(1993) A methodology for the design of multichannel network architectures. Masters thesis, King Fahd University of Petroleum and Minerals.

(1993) Critical currents and pinning forces in Y₁Ba₂Cu₃O₇₋₈Hi-T( c ) superconductor. Masters thesis, King Fahd University of Petroleum and Minerals.

(2002) A Study of dehumidification and regeneration processes in a hybrid cooling system. Masters thesis, King Fahd University of Petroleum and Minerals.

(1985) Coherency based equivalents for long-term dynamic studies. Masters thesis, King Fahd University of Petroleum and Minerals.

(1996) Computer aided instruction model for procedural programming languages. Masters thesis, King Fahd University of Petroleum and Minerals.

(1996) The effect of pH and solvent on the photophysics of thymine. Masters thesis, King Fahd University of Petroleum and Minerals.

(2001) Analysis of multi-layer arrow planar waveguide for evanescent field enhancement in low-index. Masters thesis, King Fahd University of Petroleum and Minerals.

(1976) Tooth tip losses in external gear pumps. Masters thesis, King Fahd University of Petroleum and Minerals.

(1979) Hardware digital protection. Masters thesis, King Fahd University of Petroleum and Minerals.

(1984) Decentralized control of interconnected dynamical systems. Masters thesis, King Fahd University of Petroleum and Minerals.

(1976) Theoretical study of lattice solitons in nonlinear lumped networks. Masters thesis, King Fahd University of Petroleum and Minerals.

(2005) Saturation of current transformers and its impact on digital overcurrent relays. Masters thesis, King Fahd University of Petroleum and Minerals.

(1987) Charge dependent effects on nuclear forces. Masters thesis, King Fahd University of Petroleum and Minerals.

(1989) Stratigraphical andmicrofacies analysis of some selected late cretaceous surface and subsurface sections in Arabia. Masters thesis, King Fahd University of Petroleum and Minerals.

(1998) Some properties of bicyclic extensions. Masters thesis, King Fahd University of Petroleum and Minerals.

(1997) The Four-terminal floating nullor (FTFN) and its applications. Masters thesis, King Fahd University of Petroleum and Minerals.

(1992) Generalized balanced and approximately balanced representations. Masters thesis, King Fahd University of Petroleum and Minerals.

(0007) Progressive fracture of reinforced deck slab in girder-slab type bridge deck. Masters thesis, King Fahd University of Petroleum and Minerals.

(1997) Microbial evaluation of Al-Khobar wastewater treatment plants. Masters thesis, King Fahd University of Petroleum and Minerals.

(1997) Surface roughness measurement using laser detection technique. Masters thesis, King Fahd University of Petroleum and Minerals.

(1998) Continuum damage model for compressive fatigue of high strength concrete. Masters thesis, King Fahd University of Petroleum and Minerals.

(1992) A solution of the inverse problem in quantum mechanical scattering theory using the distorted born and other approximations. Masters thesis, King Fahd University of Petroleum and Minerals.

(2000) Performance of Adaptive Admission/Congestion Control Policies on a Hybrid MC-CDMA/TDMA Integrated Multimedia Networks. PhD thesis, Concordia Univesrity.

(1997) Higher-order statistics (HOS)-based deconvolution for ultrasonic nondestructive evaluation (NDE) of materials. Masters thesis, King Fahd University of Petroleum and Minerals.

(1996) Plastic shrinkage cracking in hot weather conditions. Masters thesis, KFUPM.

(1986) Progressive fracture of reinforced deck slab in girder-slab type bridge deck. Masters thesis, KFUPM.

(1996) Protection of reinforced concrete using corrosion inhibitors and coatings. Masters thesis, KFUPM.

(1992) Strengthening of damaged reinforced concrete beams by external fiber glass plates. Masters thesis, KFUPM.

(1985) Studies on the evaluation of permeability and corrosion resisting characteristics of Portland pozzolan concrete. Masters thesis, KFUPM.

(1988) Study of various repair methods for reinforced concrete flexural members. Masters thesis, KFUPM.

(1996) The effect of casting and curing temperatures on the properties of concrete. Masters thesis, KFUPM.

(1993) The effect of temperature and salt contamination on corrosion of reinforcing steel in OPC and blended cement concretes. Masters thesis, KFUPM.

(1982) The Influence function technique in the numerical analysis of plate bending of arbitrary plan form. Masters thesis, KFUPM.

(1994) Three dimensional finite element analysis of brittle materials using CDM model. Masters thesis, KFUPM.

(1995) Use of small diameter cores in evaluation of in-situ concrete strength in Eastern Saudi Arabia. Masters thesis, KFUPM.

(2002) Plastic shrinkage cracking of blended cement concretes under hot weather conditions. Masters thesis, KFUPM.

(1995) Prediction of shear/peeling failure in plated R/C beams. Masters thesis, KFUPM.

(1995) Optimization of continuous post-tensioned bridge decks of prescribed lengths. Masters thesis, KFUPM.

(1991) Optimum design of continuous partially prestressed concrete beams. Masters thesis, KFUPM.

(2007) Optimum design of mat foundation. Masters thesis, KFUPM.

(1982) Performance of pozzolan cement concrete in a high chloride-sulphate environment. Masters thesis, KFUPM.

(2005) RBF-based meshless method for the analysis of thin elastic plates undergoing large deflections. Masters thesis, KFUPM.

(1994) Reduction in bond and the strength of slabs due to corrosion of reinforcement. Masters thesis, KFUPM.

(1982) Stability analysis of orthotropic plates by a mixed complementary energy method. Masters thesis, KFUPM.

(1985) Static analysis of horizontally curved bridge decks supported by flexible multi-girders. Masters thesis, KFUPM.

(1975) Strain survey on a small plate with a circular hole in the center. Masters thesis, KFUPM.

(1984) Strength of reinforced concrete beams in hot weather. Masters thesis, KFUPM.

(1988) Study of the effect of rust and corrosion of reinforcement on bond behavior. Masters thesis, KFUPM.

(1988) Study of the effect of rust and corrosion of reinforcemnt on bond behaviour. Masters thesis, KFUPM.

(1996) Numerical modeling of RC slabs on tensionless elastic subgrade. Masters thesis, KFUPM.

(1992) Optimal design of reinforced concrete frames. Masters thesis, KFUPM.

(1978) Optimization of Concrete strength using local aggregates from the Eastern Province of Saudi Arabia. Masters thesis, KFUPM.

(1997) Optimization of parabolic steel box arches. Masters thesis, KFUPM.

(2000) Performance evaluation of concrete coatings. Masters thesis, KFUPM.

(1996) Performance evaluation of concrete surface treatment materials. Masters thesis, KFUPM.

(1989) Performance of Epoxy-injected concrete in hot weather conditions. Masters thesis, KFUPM.

(1998) Performance optimization and modeling of slurry seal and micro surfacing utilizing steel slag aggregates. Masters thesis, KFUPM.

(1989) Load induced cracking and failure of concrete deck slabs in girder-slab type bridges. Masters thesis, KFUPM.

(1992) Nonlinear behavior of cylinder-plate junction on tensionless elastic subgrade. Masters thesis, KFUPM.

(2003) Influence of temperature and wind on moisture transport in cementitious materials. Masters thesis, KFUPM.

(2002) Evaluation of load transfer in axially loaded repaired concrete columns. Masters thesis, KFUPM.

(1992) Flexure and shear behaviour of damaged RC beams repaired by plate bonding. Masters thesis, KFUPM.

(1988) Fracture and permeability characteristics of thermally degraded concrete. Masters thesis, KFUPM.

(2005) Improving the performance of damaged FBECR in chloride-contaminated concrete. Masters thesis, KFUPM.

(2008) A speaker verification system for Arabic. Masters thesis, KingFahd UNiversity of Petroleum and Minerals.

(1990) Design and simulation of digital controllers using pipelined architecture. Masters thesis, KFUPM.

(1993) Design of an echo canceller for acoustic halls. Masters thesis, KFUPM.

(2006) Emission monitoring systems using Artificial Neural Networks. Masters thesis, KingFahd UNiversity of Petroleum and Minerals.

(0007) Inferential sensing techniques in industrial applications. Masters thesis, KingFahd UNiversity of Petroleum and Minerals.

(1982) Electrical resistivity of concrete in relation to corrosion of reinforcement. Masters thesis, KFUPM.

(1995) Elasto-plastic collapse load analysis of single mitred bends. Masters thesis, KFUPM.

(2003) Effects of aggregate quality on reinforcement corrosion. Masters thesis, KFUPM.

(1990) Durability of reinforced concrete beams repaired with various repair materials. Masters thesis, KFUPM.

(1998) Continuum damage model for compressive fatigue of high strength concrete. Masters thesis, KFUPM.

(1985) Concrete mix design for hot weather. Masters thesis, KFUPM.

(1983) Sulfur infiltrated concrete box sections with poly styrene core as panel units. Masters thesis, KFUPM.

(1989) Use of latex modified concrete as a bridge deck overlay. Masters thesis, KFUPM.

(2005) A prediction model for the residual flexural strength of corroded reinforced concrete beams. Masters thesis, KFUPM.

(1982) A Study of development and performance of sulphur-based construction blocks. Masters thesis, KFUPM.

(2005) A study of mix design and durability of self compacting concrete. PhD thesis, KFUPM.

(1980) A Three-dimensional photoelastic investigation of the stress distribution in the anchorage zone of post-tensioned beams. Masters thesis, KFUPM.

(1981) An Investigation of corrosion of steel reinforcement in concrete in the Eastern Province of Saudi Arabia. Masters thesis, KFUPM.

(1995) Computational Modelling of shrinkage in repaired concrete. Masters thesis, KFUPM.

(2000) Analysis and design of buried pipelines. Masters thesis, KFUPM.

(1988) Analysis of horizontally curved pseudo slab type bridge deck continuous over discrete pier supports. Masters thesis, KFUPM.

(1990) Assessment of concrete strength by lok and capo tests. Masters thesis, KFUPM.

(1995) Bond and durability of fusion-bonded epoxy-coated steel bars. Masters thesis, KFUPM.

(1995) Boundary element analysis of nonprismatic beams and plates. Masters thesis, KFUPM.

(1982) Buckling of multiple braced columns. Masters thesis, KFUPM.

(1994) Chloride diffusion in concrete/prediction of the onset of corrosion in reinforced concrete structures. Masters thesis, KFUPM.

(1992) Resonance Excitation and Electron Capture By Low Charged Ions. Masters thesis, KING FAHD UNIVERSITY OF PETROLEUM & MINERALS.

(1991) A Laser Doppler Anemometry Study of the Development of an Initially Turbulent Flow in a Horizontal Tube. Masters thesis, KING FAHD UNIVERSITY OF PETROLEUM & MINERALS.

(1991) Laser-Induced Ionization in Calcium Resonant and Non-Resonant Effects. Masters thesis, KING FAHD UNIVERSITY OF PETROLEUM & MINERALS.

(1991) Measurement of Differential Cross Section of 12C(d,p) Reaction at Ed = 160 to 300 keV. Masters thesis, KING FAHD UNIVERSITY OF PETROLEUM & MINERALS.

(1991) Flavor Conserving Flavor Changing Radiative Decays of Vector Mesons in Quark Model. Masters thesis, KING FAHD UNIVERSITY OF PETROLEUM & MINERALS.

(1993) Finite Space Direct and Inverse Problem in Quantum Mechanical Scattering Theory Using the Born Approximation. Masters thesis, KING FAHD UNIVERSITY OF PETROLEUM & MINERALS.

(1993) Critical Currents and Pinning Forces in Y1Ba2Cu3O7-δ Hi-Tc Superconductor. Masters thesis, KING FAHD UNIVERSITY OF PETROLEUM & MINERALS.

(1992) A New Correlation for Two-Phase Flow Through Chokes. Masters thesis, KING FAHD UNIVERSITY OF PETROLEUM & MINERALS.

(1992) Surface Charge Behavior and Adsorption of Surfactants on Carbonate Rocks. Masters thesis, KING FAHD UNIVERSITY OF PETROLEUM & MINERALS.

(1992) Factors Affecting Pseudo Relative Permeability Curves. Masters thesis, KING FAHD UNIVERSITY OF PETROLEUM & MINERALS.

(1991) The Effect of Inexact Line Search On Conjugate Gradient Methods. Masters thesis, KING FAHD UNIVERSITY OF PETROLEUM & MINERALS.

(1991) Factors Affecting Mercury Capillary Pressure Measurements. Masters thesis, KING FAHD UNIVERSITY OF PETROLEUM & MINERALS.

(1993) On the Second Smallest Eigenvalue of The Laplacain. Masters thesis, KING FAHD UNIVERSITY OF PETROLEUM & MINERALS.

(1992) Computation of Singularities in B.V.P.’S Using Finite Differences with Block-Elimination. Masters thesis, KING FAHD UNIVERSITY OF PETROLEUM & MINERALS.

(1991) Idean Extension of E-Bisimple Semigroup Theorems. Masters thesis, KING FAHD UNIVERSITY OF PETROLEUM & MINERALS.

(1993) A Paleomagnetic Study of Central Harrat Rahat, Western Saudi Arabia. Masters thesis, KING FAHD UNIVERSITY OF PETROLEUM & MINERALS.

(1992) Hydrogeochemistry of Alat and Khobar Aquifers in Eastern Saudi Arabia. Masters thesis, KING FAHD UNIVERSITY OF PETROLEUM & MINERALS.

(1992) Lithofacies and Diagenetic Study of the Uthmaniyah Arab-D Limestone Member (Ghawar Oil Field). Masters thesis, KING FAHD UNIVERSITY OF PETROLEUM & MINERALS.

(1993) Management of Groundwater Resources in Somalia. Masters thesis, KING FAHD UNIVERSITY OF PETROLEUM & MINERALS.

(1991) Geostatistical Modelling of Zarghat Magnesite Deposit, Saudi Arabia. Masters thesis, KING FAHD UNIVERSITY OF PETROLEUM & MINERALS.

(1993) Heat Transfer Mechanisms Governing Laser Metal Interactions. Masters thesis, KING FAHD UNIVERSITY OF PETROLEUM & MINERALS.

(1993) Performance Evaluation and Multiobjective Optimization of Passive Vehicle Suspension Systems. Masters thesis, KING FAHD UNIVERSITY OF PETROLEUM & MINERALS.

(1992) Supersonic Jet Impingement on a Flat Surface at Angles from -50 to -300. Masters thesis, KING FAHD UNIVERSITY OF PETROLEUM & MINERALS.

(1992) Coupled Bending Torsional Vibration of Rotating Shafts Using Finite Element. Masters thesis, KING FAHD UNIVERSITY OF PETROLEUM & MINERALS.

(2007) a. Masters thesis, a.

(2001) TARGETING IN MULTI-CLASS SCREENING UNDER ERROR AND ERROR-FREE MEASUREMENT SYSTEMS. Masters thesis, KFUPM.

(1987) A model study of slurry-trench excavation and soil-bentonite cut-off walls. Masters thesis, KFUPM.

(1985) Deformation of cohesionless soils under repeated loading. Masters thesis, KFUPM.

(1988) Constitutive modelling of Dhahran dune sand using cap model. Masters thesis, kfupm.

(1987) Creep characteristics of local sands. Masters thesis, KFUPM.

(1997) Effect of gypsum-anhydrite on the behavior of expansive clays. Masters thesis, KFUPM.

(1997) Improvement of Eastern Saudi sabkha soils for road construction. Masters thesis, KFUPM.

(1997) Improvement of Eastern Saudi sabkha soils for road construction. Masters thesis, KFUPM.

(2001) Plasto-damage model for stress-strain behavior of soil. Masters thesis, KFUPM.

(1992) Studies on soil-foundation interaction in the sabkha environment of Eastern Province of Saudi Arabia. PhD thesis, KFUPM.

(2000) The Interaction between soil and buried bent pipelines. Masters thesis, KFUPM.

(1990) Studying the behavior of Dhahran dune sand using the 3rd invariant stress dependent combined hardening cap model. Masters thesis, KFUPM.

(1998) Assesment of the geotechnical properties of stabilized sand-marl mixtures for constructional purposes. Masters thesis, KFUPM.

(2000) Behavior of laterally loaded pile group model in sand. Masters thesis, KFUPM.

(2005) Pullout capacity of block anchor in sand. Masters thesis, KFUPM.

(1988) Study of laterally loaded single pile model. Masters thesis, KFUPM.

(1995) Evaluation of thermal resistivity of soils in Saudi Arabia. Masters thesis, KFUPM.

(2001) Effect of gradation and testing procedures on the load carrying capacity of calcareous sediments. Masters thesis, KFUPM.

(1988) Geotechnical properties of the surfacial soil of Sanaa The Yemen Arab Republic. Masters thesis, KFUPM.

(1979) Uncertainty analysis in shear strength of soils and its application to stability of slope problems. Masters thesis, KFUPM.

(1998) Fracture toughness investigation of an indigenous limestone rock formation. Masters thesis, KFUPM.

(1991) Characerization of expansive soils in the Eastern Province of Saudi Arabia. Masters thesis, KFUPM.

(1995) Characterization and stabilization of Eastern Saudi Marls. Masters thesis, KFUPM.

(1997) Chemical stabilization of Al-Qurrayyah Eastern Saudi Sabkha soil. Masters thesis, KFUPM.

(1994) Swelling potential and treatment of expansive soil. Masters thesis, KFUPM.

(1999) Interface frictional characteristics of non-woven geotextile - Sabkha and - sand using pull-out tests. Masters thesis, KFUPM.

(1987) The assessment of degree of cementation in weakly to moderately cemented sands by the static cone penetrometer. Masters thesis, KFUPM.

(2004) Studies on soil-foundation interaction in the Sabkha environment of Eastern Saudi Arabia. Masters thesis, KFUPM.

(1982) Drivers' attitudes and their relationship to accident involvement in Saudi Arabia. Masters thesis, KFUPM.

(1985) Static strength properties of artificially cemented sands. Masters thesis, KFUPM.

(2005) Effect of rate of water table rise on LNAPL entrapment in uniform and well-graded sands. Masters thesis, KFUPM.

(1986) Assessment of road user charges in Saudi Arabia. Masters thesis, KFUPM.

(2000) Effects of geotextiles on the load-carrying capacity of pavements on Sabkha. Masters thesis, KFUPM.

(1988) Engineering properties and mineralogical composition of expansive clays in Al-Qatif area. Masters thesis, KFUPM.

(1988) Effect of degree of saturation, air voids and medium of attack on the durability of asphalt concrete mixes in Jeddah. Masters thesis, KFUPM.

(1986) Axle loads and pavement performance indicators for typical highways in Eastern Province. Masters thesis, KFUPM.

(2002) Characteristic study of catastrophic tire failure in Eastern Province of Saudi Arabia. Masters thesis, KFUPM.

(1985) Development of an effective patrol dispatching system for traffic police operations. Masters thesis, KFUPM.

(1987) Development of left-turn lane warrants for Saudi Arabia. Masters thesis, KFUPM.

(1989) Effect of using geotextiles on behavior of Sabkaha subgrades. Masters thesis, KFUPM.

(1985) Effect of vehicle dimensional characteristics on highway geometric design. Masters thesis, KFUPM.

(1985) Estimating the parking demand for mosques. Masters thesis, KFUPM.

(2007) Evaluating adequacy of traffic optimization models under local traffic conditions. Masters thesis, KFUPM.

(1990) Laboratory evaluation of reclaimed rubber-asphaltic concrete mixes. Masters thesis, KFUPM.

(1986) Evaluation of emulsified asphalt treated sand for road bases. Masters thesis, KFUPM.

(1997) Optimization of steel slag aggregates for bituminous mixes in Saudi Arabia. Masters thesis, KFUPM.

(1988) Prediction of pavement rutting from laboratory characterization tests. Masters thesis, KFUPM.

(1988) Evaluation of slurry seal performance in the Eastern Province of Saudi Arabia. Masters thesis, KFUPM.

(1982) Improving water resistance of asphalt concrete in Saudi Arabia. Masters thesis, KFUPM.

(1988) Laboratory evaluation of local asphalt concrete mix design procedures. Masters thesis, KFUPM.

(1989) Road traffic noise in developing countries. Masters thesis, KFUPM.

(1984) Static and dynamic triaxial tests on sulphur-asphalt-sand mixes. Masters thesis, KFUPM.

(1985) Strength of asphalt emulsion treated marl for road bases. Masters thesis, KFUPM.

(1985) Structural evaluation of in-service asphalt pavements by deflection measurements. Masters thesis, KFUPM.

(1983) Validity and use of traffic conflict technique : a study in the Kingdom of Saudi Arabia. Masters thesis, KFUPM.

(1997) A Study on the development of vehicular loding for design of highway bridges in Saudi Arabia. Masters thesis, KFUPM.

(2005) Calibration of VISSIM to the traffic conditions of Khobar and Dammam, Saudi Arabia. Masters thesis, KFUPM.

(2003) Causes of female teacher work trip accidents in the Kingdom of Saudi Arabia. Masters thesis, KFUPM.

(1987) Development of guidelines for four phase traffic signal scheme in the Kingdom of Saudi Arabia. Masters thesis, KFUPM.

(1995) Effect of captive riders in intercity mode-choice modeling. Masters thesis, KFUPM.

(1995) Laboratory evaluation of hedmanite and lime modified asphalt concrete mixes. Masters thesis, KFUPM.

(1987) Effect of sight distance on the safety of unsignalized intersections. Masters thesis, KFUPM.

(1988) Parking problem of Arafat. Masters thesis, KFUPM.

(2002) Performance modification of Saudi-asphalt binders using SABIC polymers. Masters thesis, KFUPM.

(1989) Pedestrian behavior related to accident involvement. Masters thesis, KFUPM.

(1981) The effects of baghouse fines and mineral fillers on asphalt mix properties in the Eastern Province of Saudi Arabia. Masters thesis, KFUPM.

(1997) Performance evaluation of slow sand filters: a probabilistic approach. Masters thesis, KFUPM.

(1997) Validation and improvement of rear-end traffic conflict model for safety evaluation of coordinated signal systems. Masters thesis, KFUPM.

(1996) Proposed methodology for designing the signal change interval. Masters thesis, KFUPM.

(1985) Recycling of deteriorated asphalt pavements. Masters thesis, KFUPM.

(1997) Relationship between the noncompliance behavior at signalized intersection an driver characteristics. Masters thesis, KFUPM.

(1997) Developing behavioral models for driver gap acceptance at priority intersections. PhD thesis, KFUPM.

(1997) Modeling of pavement condition and maintenance priority ranking for road networks. PhD thesis, KFUPM.

(1996) Performance modeling of Arabian asphalt using HP-GPC chromatography. PhD thesis, KFUPM.

(1996) Polymer modification of Arab Asphalt to Suit Gulf Countries' performance requirements. PhD thesis, KFUPM.

(1994) The effect of signal coordination on interesection safety. PhD thesis, KFUPM.

(1994) The effects of mode perceptions on intercity mode-choice behavior in Saudi Arabia. PhD thesis, KFUPM.

(1999) Analysis of static and dynamic characteristics of twin-cell steel box girders. Masters thesis, KFUPM.

(1980) Application of modified Reissner theory to sandwich plates. Masters thesis, KFUPM.

(1979) Approximate techniques towards solutions of Reissner plates. Masters thesis, KFUPM.

(1981) Computation of lateral-torsional buckling loads for nonprismatic beam-columns. Masters thesis, KFUPM.

(2005) Compliance criteria for quality concrete. Masters thesis, KFUPM.

(1985) Corrosion of reinforcing steel in sulphur concrete. Masters thesis, KFUPM.

(1983) Influence of transverse normal strain on finite, simply supported isotropic and orthotropic plates. Masters thesis, KFUPM.

(1978) Investigation into the modulus of elasticity of concrete. Masters thesis, KFUPM.

(1982) Optimization of concrete mix design using a statistical approach. Masters thesis, KFUPM.

(2006) Moisture transport and shrinkage in new generation concretes. Masters thesis, KFUPM.

(1987) Nonlinear finite element analysis of ferrocement beams. Masters thesis, KFUPM.

(1984) Material and fracture characterization of sisal fibre concrete. Masters thesis, KFUPM.

(1981) Optimizaiton of concrete mix design for durability in the Estern Province of Saudi Arabia. Masters thesis, KFUPM.

(1983) Minimum weight design of nonuniform steel I-girders and columns. Masters thesis, KFUPM.

(1986) Mixed mode fracture for concrete. Masters thesis, KFUPM.

(1985) Influence of cracks on the elastic stability of columns and frames. Masters thesis, KFUPM.

(1994) Deterioration of concrete structures in the coastal regions of the Republic of Yemen. Masters thesis, KFUPM.

(1988) Durability and thermal incompatibility of concrete constituents made from local materials in the Arabian Gulf Countries. Masters thesis, KFUPM.

(1984) Durability assessment criterion for concrete and reinforcement exposed to simulated environmental conditions of Saudi Arabia. Masters thesis, KFUPM.

(2005) Durability performance of GFRP bars under aggressive local exposure conditions. Masters thesis, KFUPM.

(1979) Economic proportioning of continuous steel I - beam. Masters thesis, KFUPM.

(2007) Effect of curing methods on properties of plain and blended cement concretes. Masters thesis, KFUPM.

(1987) Effect of fiber reinforcement on the durability of reinforced concrete in Arabian Gulf Region. Masters thesis, KFUPM.

(1979) Effect of the rigidity of columns and the dimensional changes in beams on post-tensioning forces. Masters thesis, KFUPM.

(1990) Evaluation of repair materials with emphasis on crack injection repair. Masters thesis, KFUPM.

(1989) Evaluation of shear behavior of ferrocement using direct shear specimen and beam specimen. Masters thesis, KFUPM.

(2007) Evaluation of ternary cements for improving concrete durability. Masters thesis, KFUPM.

(1985) Fatigue of concrete in the presence of a crack. Masters thesis, KFUPM.

(1976) Finite beams on an elastic foundation. Masters thesis, KFUPM.

(1989) Finite element modelling for the bending of thick plates. Masters thesis, KFUPM.

(1986) Flexural behavior of ferrocement I-beams and box-beams. Masters thesis, KFUPM.

(1988) Flexural behavior of ferrocement sandwich panels. Masters thesis, KFUPM.

(2006) Flexural behavior of prestressed precast hollow core slabs strengthened with CFRP sheets. Masters thesis, KFUPM.

(1990) Fracture modelling of reinforced concrete beams in mode I crack. Masters thesis, KFUPM.

(1985) Flexural behavior of reinforced sulphur concrete beams. Masters thesis, KFUPM.

(1993) Weilbull Analysis of Cutting Tools and Dies. Masters thesis, KING FAHD UNIVERSITY OF PETROLEUM & MINERALS.

(1993) Modelling and Antiswing Control of Overhead Cranes. Masters thesis, KING FAHD UNIVERSITY OF PETROLEUM & MINERALS.

(1987) An experimental model study to investigate the effect of scale on dispersion characteristics in chlorine contact. Masters thesis, KFUPM.

(1983) Bio-chemical treatment of saline domestic wastewater using RBCs. Masters thesis, KFUPM.

(1988) Effect of denitrification on dispersion of nitrate in saturated porous media. Masters thesis, KFUPM.

(1980) Environmental considerations in planning of urban areas - a case study of Dammam-Khobar-Dhahran area. Masters thesis, KFUPM.

(1990) Estimating flood quantiles in southwestern part of Saudi Arabia. Masters thesis, KFUPM.

(1985) Evaluating policy changes using a network simulation model. Masters thesis, KFUPM.

(1996) Evaluation of a patented combined water desalination and power generating plant. Masters thesis, KFUPM.

(1987) Evaluation of water quality in KFUPM drinking water system. Masters thesis, KFUPM.

(1978) Feasibility of biological nitrification process for treatment of fertilizer industry water. Masters thesis, KFUPM.

(1979) Increased runoff through reduced infiltration in Saudi Arabia. Masters thesis, KFUPM.

(1983) Influence of Ozone bubbling activity and reaction Kinetics in Ozone-Wastewater disinfection system. Masters thesis, KFUPM.

(2001) Locating optimum water quality monitoring stations in water distribution networks, using genetic algorithm. Masters thesis, KFUPM.

(2004) Optimal locations of booster disinfection stations in Al-Khobar water distribution system. Masters thesis, KFUPM.

(1987) Quality of desalinated blended seawater in Dammam. Masters thesis, KFUPM.

(1986) Tertiary wastewater treatment by direct filtration. Masters thesis, KFUPM.

(2006) Treatment of petroleum refinery wastewater using TiO2-Mediated photocatalysis. Masters thesis, KFUPM.

(2006) Treatment of simulated dairy wastewater by electrocoagulation. Masters thesis, KFUPM.

(2006) Treatment of simulated petrochemical wastewater by means of continuous electrocoagulation-ultrafiltration process. Masters thesis, KFUPM.

(2005) Treatment of the oil refinery wastewater using photocatalysis. Masters thesis, KFUPM.

(1987) Trihalomethanes (THMs) formation in a distillation process. Masters thesis, KFUPM.

(1989) Collocation on irregular domains with adaptive hermite element family for transport problems. PhD thesis, KFUPM.

(1992) Biological treatment of hazardous contaminants in sequencing batch reacors. Masters thesis, KFUPM.

(1991) Non-linear finite element modelling of reinforced concrete slabs. PhD thesis, KFUPM.

(1989) Characterization and treatment of a petrochemical wastewater for reuse. Masters thesis, KFUPM.

(2004) Combined electrooxidation and electrocoagulation processes for the treatment of municipal wastewater. Masters thesis, KFUPM.

(2002) Development of an equivalent dispersion coefficient for a complex contaminant transport model. Masters thesis, KFUPM.

(1988) Dispersion of chloroform in a saturated porous media. Masters thesis, KFUPM.

(1992) Effect of dissolved oxygen on the adsorptive capacity of a granular activated charcoal for phenol and O-Cresol. Masters thesis, KFUPM.

(1993) Evaluation of Dammam carrousel treatment plant for nitrogen removal. Masters thesis, KFUPM.

(1993) Experimental investigation of microbial growth in subsurface environment. Masters thesis, KFUPM.

(1993) Non-linear finite element analysis of reinforced concrete beams repaired by plate bonding. PhD thesis, KFUPM.

(1996) Effects of oily sludge landforming on the soils environment. Masters thesis, KFUPM.

(1989) Investigation of leachate from a sanitary landfill in Saudi Arabia. Masters thesis, KFUPM.

(1997) Fate of secondary effluent flow through porous media. Masters thesis, KFUPM.

(1995) Impact of process variables on nutrient removal in slow sand filters. Masters thesis, KFUPM.

(1997) Microbial evaluation of Al-Khobar wastewater treatment plants. Masters thesis, KFUPM.

(1998) Elastic plastic analysis of semi-rigid industrial frames. PhD thesis, KFUPM.

(2000) Iterative coupling of boundary and finite element methods. PhD thesis, KFUPM.

(1991) Mechanisms of high durability performance of plain and blended cements. PhD thesis, KFUPM.

(1991) Criteria for cathodic protection of steel in concrete in the context of Arabian Gulf environment. PhD thesis, KFUPM.

(1995) Canonical elastoplastic - damage modelling of reinforced concrete. PhD thesis, KFUPM.

(1989) A generalized theory for bending of thick isotropic rectangular plates. PhD thesis, KFUPM.

(2000) Analysis of laminated general shells undergoing finite rotations and large motion. PhD thesis, KFUPM.

(1999) Simulation and assessment of concrete repair systems. PhD thesis, KFUPM.

(2000) Elasto-damage fatigue modeling of RC beams strengthened by CFRP. PhD thesis, KFUPM.

(2000) Durability of high performance concrete. PhD thesis, KFUPM.

(2004) Computational chemo-damage transport modeling of durability synergies in concrete. PhD thesis, KFUPM.

(1978) Analysis of multi girder short span highway bridges. Masters thesis, KFUPM.

(1981) An Investigation of properties of concrete made with concrete rubble as aggregate. Masters thesis, KFUPM.

(1993) Modeling of biological wastewater treatment in sequencing batch reactors. Masters thesis, KFUPM.

(1985) A Variational finite element solution for the Navier-Stokes equations in two dimensions. Masters thesis, KFUPM.

(2003) Risk and hydraulic reliability analysis of water distribution systems. Masters thesis, KFUPM.

(1989) A refined theory for symmetric orthotropic laminated plates. Masters thesis, KFUPM.

(1989) Status of hydrological network in south-western region of the Kingdom of Saudi Arabia. Masters thesis, KFUPM.

(1989) Tertiary treatment of municipal sewage via slow sand filtration. Masters thesis, KFUPM.

(1987) Tertiary wastewater treatment by sedimantation and sand filtration. Masters thesis, KFUPM.

(2003) The Production of activated carbon from local palm-date pits for pollution removal process. Masters thesis, KFUPM.

(1985) A Photoelstic investigation of stress distribution in laterally loaded thin plates simulating window glass panels. Masters thesis, KFUPM.

(2004) Treatment of refinery wastewater using crossflow membrane bioreactor. Masters thesis, KFUPM.

(1989) Use of microtubes in the design of optimized trickle irrigation network. Masters thesis, KFUPM.

(1980) A Photoelastic investigation of the stress distribution in the anchorage zones of post-tensioned concrete slabs. Masters thesis, KFUPM.

(1979) A Photoelastic investigation of stress distribution in deep beams with an without web opening. Masters thesis, KFUPM.

(1991) Treatise on solute transport in porous media and its modeling for centration-dependent permeability. PhD thesis, KFUPM.

(2002) Treatment of water contaminated with dimethyl phthalate by Fenton, Photo-Fenton and UV/H₂O₂ processes. PhD thesis, KFUPM.

(1996) Unsteady hydrodynamic forces on spheroidal bodies. PhD thesis, KFUPM.

(1992) Second-Law-Based Thermodynamic Analysis of Vapor-Compression Refrigeration Cycles. Masters thesis, KING FAHD UNIVERSITY OF PETROLEUM & MINERALS.

(1992) Optimal Assessment of Using Solar and Wind Power for Desalination on the Eastern Coast of Saudi Arabia. Masters thesis, KING FAHD UNIVERSITY OF PETROLEUM & MINERALS.

(1992) Fatigue Life Predictions of Notched Members in Arabian Gulf Water. Masters thesis, KING FAHD UNIVERSITY OF PETROLEUM & MINERALS.

(1992) Experimental Determination of Heat Transfer Coefficient for Water-Lithium Bromide Mixture. Masters thesis, KING FAHD UNIVERSITY OF PETROLEUM & MINERALS.

(1993) An Expert System for Designing Hydrodynamic Journal Bearings. Masters thesis, KING FAHD UNIVERSITY OF PETROLEUM & MINERALS.

(1995) A groundwater velocity and dissolved oxygen on bioremediation of gasoline-contaminated sandy aquifers. PhD thesis, KFUPM.

(2005) Assessment of the relationship between the spilled LNAPL volume and its thickness in monitoring wells. PhD thesis, KFUPM.

(1993) Effect of dissolved oxygen on activated carbon uptake. PhD thesis, KFUPM.

(2003) Study of reaction kinetics of a submerged membrane activated sludge process. PhD thesis, KFUPM.

(1992) Unsteady Natural Convection in Open Ended Vertical Concentric Annuli. Masters thesis, KING FAHD UNIVERSITY OF PETROLEUM & MINERALS.

(1992) Numerical Simulation of Ice Crystal Growth (Initial Frosting Process). Masters thesis, KING FAHD UNIVERSITY OF PETROLEUM & MINERALS.

(1992) Generalized Balanced and Approximately Balanced Representations. Masters thesis, KING FAHD UNIVERSITY OF PETROLEUM & MINERALS.

(1992) A New Multisampling-Based Non-Coherent FSK Receiver Using Parametric Spectrum Estimators. Masters thesis, KING FAHD UNIVERSITY OF PETROLEUM & MINERALS.

(1992) Performance of TCM with Concatenated Codes Over Fading Channels. Masters thesis, KING FAHD UNIVERSITY OF PETROLEUM & MINERALS.

(1998) Multiobjective water resources planning under demand, supply and quality uncertainties. Masters thesis, KFUPM.

(1994) Numerical simulation of groundwater depletion in Al-Hasa area. Masters thesis, KFUPM.

(1992) Numerical simulation of groundwater in the Umm Er Radhuma Aquifer at Shadco project. Masters thesis, KFUPM.

(1990) Performance of slow sand filters in treating secondary effluent using different sizes of local sand. Masters thesis, KFUPM.

(1997) Predicting short-duration, high-intensity rainfall in Saudi Arabia. Masters thesis, KFUPM.

(1998) Quality changes of secondary effluent as it passes through amended sand column. Masters thesis, KFUPM.

(1997) Quantifying crude oil spill volume in homogeneous and layered porous media from product thickness in monitoring wells. Masters thesis, KFUPM.

(1997) Removal of microorganisms through slow sand filtration of chlorinated vs. nonchlorinated secondary effluents. Masters thesis, KFUPM.

(1991) Reliability studies of multireservoir system using stochastic approach. Masters thesis, KFUPM.

(1995) Removal of coliphage and bacteria through slow sand filtration. Masters thesis, KFUPM.

(1987) Removal of iron and manganese with ozone. Masters thesis, KFUPM.

(1991) The Development of an Intelligent Alarm Processor. Masters thesis, KING FAHD UNIVERSITY OF PETROLEUM & MINERALS.

(1992) Microcontroller Based PWM UPS. Masters thesis, KING FAHD UNIVERSITY OF PETROLEUM & MINERALS.

(1993) Steady state experimental evaluation of a novel Raney-Ni/PTFE gas diffusion electrode in an alkaline fuel cell. Masters thesis, King Fahd University of Petroleum and Minerals.

(1993) Channel Characterization of Radio Links in the Southern Region of Saudi Arabia. Masters thesis, KING FAHD UNIVERSITY OF PETROLEUM & MINERALS.

(1992) VLSI Implementation of Petri Net Models of a Class of Digital Systems. Masters thesis, KING FAHD UNIVERSITY OF PETROLEUM & MINERALS.

(1992) All Optical Reflectivity Modulation Utilizing Surface Plasmon Resonance. Masters thesis, KING FAHD UNIVERSITY OF PETROLEUM & MINERALS.

(1992) Development of a DSP-32C Based Electrocardiograph Machine using Microcomputers. Masters thesis, KING FAHD UNIVERSITY OF PETROLEUM & MINERALS.

(1991) H ∞ State Feedback with Closed-Loop Transfer Recovery (H ∞ / CLTR) Design Method. Masters thesis, KING FAHD UNIVERSITY OF PETROLEUM & MINERALS.

(1993) Identification of Coherent Generators Using Linear Trajectory. Masters thesis, KING FAHD UNIVERSITY OF PETROLEUM & MINERALS.

(1992) Optimal Shunt Compensators at Nonlinear Busbars. Masters thesis, KING FAHD UNIVERSITY OF PETROLEUM & MINERALS.

(1991) Towards an Optimal Accumulator Size For the Hough Transform. Masters thesis, KING FAHD UNIVERSITY OF PETROLEUM & MINERALS.

(1992) Performance of Multistage Interconnection Networks under Non-Uniform Reference Model. Masters thesis, KING FAHD UNIVERSITY OF PETROLEUM & MINERALS.

(1991) Construction Cost Control in the Eastern Province of Saudi Arabia. Masters thesis, KING FAHD UNIVERSITY OF PETROLEUM & MINERALS.

(1992) Enforcing the Role of Construction Insurance in Saudi Arabia. Masters thesis, KING FAHD UNIVERSITY OF PETROLEUM & MINERALS.

(1992) Multiple Objective LP (MOLP) For Scheduling Repetitive Projects. Masters thesis, KING FAHD UNIVERSITY OF PETROLEUM & MINERALS.

(1992) Evaluation of Contract Administration For Public Projects in Saudi Arabia. Masters thesis, KING FAHD UNIVERSITY OF PETROLEUM & MINERALS.

(1991) Contractor Prequalification: A Computerized Model for Public Projects in Bahrain. Masters thesis, KING FAHD UNIVERSITY OF PETROLEUM & MINERALS.

(1991) Thermal Insulation Economics For Saudi Residential Buildings. Masters thesis, KING FAHD UNIVERSITY OF PETROLEUM & MINERALS.

(1993) Back-End Design of a Formal High Level Synthesis System. Masters thesis, KING FAHD UNIVERSITY OF PETROLEUM & MINERALS.

(1993) An Area Efficient FPGA: Design using Non-Volatile RAM. Masters thesis, KING FAHD UNIVERSITY OF PETROLEUM & MINERALS.

(1993) A Methodology for the High Level Design Of Object-Oriented Software. Masters thesis, KING FAHD UNIVERSITY OF PETROLEUM & MINERALS.

(1993) A Parallel List Scheduling Algorithm: Design and Performance. Masters thesis, KING FAHD UNIVERSITY OF PETROLEUM & MINERALS.

(1991) A Study of Graph Coloring Heuristics And its Application to a Time Tabling Problem In a Registration and Scheduling System. Masters thesis, KING FAHD UNIVERSITY OF PETROLEUM & MINERALS.

(1992) An Arabic Sentence Generator. Masters thesis, KING FAHD UNIVERSITY OF PETROLEUM & MINERALS.

(1992) Parallel Optical Architectures For Some Comparison-Based Problems. Masters thesis, KING FAHD UNIVERSITY OF PETROLEUM & MINERALS.

(1992) The Design and Implementation of a Structured Programming Language for the Description of Optical Architectures. Masters thesis, KING FAHD UNIVERSITY OF PETROLEUM & MINERALS.

(1992) A Fault Independent Test Generation Method For Combinational Logic Circuits. Masters thesis, KING FAHD UNIVERSITY OF PETROLEUM & MINERALS.

(1992) Software Design Language for Concurrent Distributed Systems. Masters thesis, KING FAHD UNIVERSITY OF PETROLEUM & MINERALS.

(1992) Nonlinear Behavior of Cylinder-Plate Junction of Tensionless Elastic Subgrade. Masters thesis, KING FAHD UNIVERSITY OF PETROLEUM & MINERALS.

(1992) Optimal Design of Reinforced Concrete Frames. Masters thesis, KING FAHD UNIVERSITY OF PETROLEUM & MINERALS.

(1991) Reliability Studies of Multi-Reservoir System Using Stochastic Approach. Masters thesis, KING FAHD UNIVERSITY OF PETROLEUM & MINERALS.

(1991) Characterization of Expansive Soils in the Eastern Province of Saudi Arabia. Masters thesis, KING FAHD UNIVERSITY OF PETROLEUM & MINERALS.

(1992) Biological Treatment of Hazardous Contaminants in Sequencing Batch Reactors. Masters thesis, KING FAHD UNIVERSITY OF PETROLEUM & MINERALS.

(1993) A Study of Translational Diffusion Constants of Paramagnetic Species In Solution. Masters thesis, KING FAHD UNIVERSITY OF PETROLEUM & MINERALS.

(1993) 15N and 13C NMR Studies of the Interaction of Cyanide Ion With Gold(I) Drugs. Masters thesis, KING FAHD UNIVERSITY OF PETROLEUM & MINERALS.

(1992) Flow Injection Spectrophotometric Assay of Tetracyclines in Drug Formulations. Masters thesis, KING FAHD UNIVERSITY OF PETROLEUM & MINERALS.

(1991) Chemical Analysis of Some Penicillin And Cephalosporin Drugs. Masters thesis, KING FAHD UNIVERSITY OF PETROLEUM & MINERALS.

(1992) Cycloaddition Reactions of A Heterocyclic Nitrone. Masters thesis, KING FAHD UNIVERSITY OF PETROLEUM & MINERALS.

(1992) EPR Study of Vanadyl Complexes with Schiff Bases Derived from S-Methyl- Carbodithioato-Hydrazine. Masters thesis, KING FAHD UNIVERSITY OF PETROLEUM & MINERALS.

(1993) Experimental Determination of the Frequency Spectrum of the Rose Bengal Picosecond Fluorescence using Two Beating Ring Dye Lasers. Masters thesis, KING FAHD UNIVERSITY OF PETROLEUM & MINERALS.

(1993) Quality Management Activities in Design And Construction Phases in Saudi Arabia. Masters thesis, KING FAHD UNIVERSITY OF PETROLEUM & MINERALS.

(1993) The Effects of Faulty Design and Construction of Building Maintenance. Masters thesis, KING FAHD UNIVERSITY OF PETROLEUM & MINERALS.

(1993) Causes of Contractors’ Failures in Saudi Arabia. Masters thesis, KING FAHD UNIVERSITY OF PETROLEUM & MINERALS.

(1993) Factors Affecting Quality of Pavement Construction in Saudi Arabia. Masters thesis, KING FAHD UNIVERSITY OF PETROLEUM & MINERALS.

(1991) Feasibility of Adobe as a Construction Material A Case Study. Masters thesis, KING FAHD UNIVERSITY OF PETROLEUM & MINERALS.

(1992) Numerical Simulation of Groundwater in the Umm er Radhuma Aquifer at Shadco Project – Eastern Province. Masters thesis, KING FAHD UNIVERSITY OF PETROLEUM & MINERALS.

(1992) Effect of Dissolved Oxygen on the Adsorptive Capacity of a Granular Activated Charcoal For Phenol and O-Cresol. Masters thesis, KING FAHD UNIVERSITY OF PETROLEUM & MINERALS.

(1993) Modeling of Biological Wastewater Treatment in Sequencing Batch Reactors. Masters thesis, KING FAHD UNIVERSITY OF PETROLEUM & MINERALS.

(1990) Performance of Slow Sand Filters In Treating Secondary Effluent Using Different Sizes of Local Sand. Masters thesis, KING FAHD UNIVERSITY OF PETROLEUM & MINERALS.

(1992) Flexture and Shear Behaviour of Damaged RC Beams Repaired By Plate Bonding. Masters thesis, KING FAHD UNIVERSITY OF PETROLEUM & MINERALS.

(1993) Chemical Aspects of Thermal Instability in Jet Fuels From Saudi-Arabian Crude Oils. Masters thesis, KING FAHD UNIVERSITY OF PETROLEUM & MINERALS.

(1992) Steady State Multiplicity In Gas-Liquid CSTRs. Masters thesis, KING FAHD UNIVERSITY OF PETROLEUM & MINERALS.

(1992) Numerical Simulation of Continuous Countercurrent Adsorption Systems. Masters thesis, KING FAHD UNIVERSITY OF PETROLEUM & MINERALS.

(1992) Density-Temperature Behavior of Pure And Defined Binary and Ternary Hydrocarbon Mixtures. Masters thesis, KING FAHD UNIVERSITY OF PETROLEUM & MINERALS.

(1992) Hydrogen Production by The Electrolysis of Saline Water. Masters thesis, KING FAHD UNIVERSITY OF PETROLEUM & MINERALS.

(1993) Steady State Experimental Evaluation of a Novel Raney-Ni/PTFE Gas Diffusion Electrode in an Alkaline Fuel Cell. Masters thesis, KING FAHD UNIVERSITY OF PETROLEUM & MINERALS.

(2004) IDENTIFICATION AND CONTROL STRATEGY APPLIED IN LOAD MANAGEMENT OF RESIDENTIAL AIR-CONDITIONERS. Masters thesis, KFUPM.

(1998) Hardware Model of an Expandable RSA Cryptographic System. Masters thesis, King Fahd University of Petroleum and Minerals (KFUPM).

(2008) Research statement. PhD thesis, KFUPM.

(2002) Conjugate Free Convection Heat Transfer in Vertical Eccentric Annuli. Masters thesis, King Fahd University of Petroleum and Minerals.

(2006) Parallelization of Stochastic Evolution. Masters thesis, King Fahd University of Petroleun and Minerals.

(2007) A Stochastic Approach To Solving The Weight Setting Problem in OSPF Networks. Masters thesis, KFUPM.

(2002) New Hardware Algorithms and Designs for Montgomery Modular Inverse Computation in Galois Fields GF(p) and GF(2n). PhD thesis, Oregon State University.

(1998) A Hardware Model of an Expandable RSA Cryptogrsphic System. Masters thesis, King Fahd University of Petroleum and Minerals (KFUPM).