Carbon-Based Magnetic Nanoparticles as Promoters for Efficient CO2 Storage via Hydrate Formation. Masters thesis, King Fahd University of Petroleum and Minerals.

Fabrication and characterization of cobalt molybdate-based electrocatalysts for electrochemical hydrogen production. Masters thesis, King Fahd University of Petroleum and Minerals.

Bio-based Materials for Carbon capture. Masters thesis, King Fahd University of Petroleum and Minerals.

Co-pyrolysis of Microalgae and Polypropylene-Based Plastic Waste into Valuable Products. Masters thesis, King Fahd University of Petroleum and Minerals.

Development of Cathode Composite Materials for Improving Performance in All-Solid-State Lithium-Sulfur Batteries. Masters thesis, King Fahd University of Petroleum and Minerals.

Single and Dual-Atom Doped High-Crystalline g-C₃N₄ for Enhanced Photocatalytic H₂ Production. Masters thesis, King Fahd University of Petroleum and Minerals.

BIOCHAR PRODUCTION THROUGH CO-PYROLYSIS OF WASTE PLASTIC WITH SPENT COFFEE GROUNDS FOR ENERGY STORAGE APPLICATIONS. Masters thesis, King Fahd University of Petroleum and Minerals.

Development and Characterization of Polymeric Membranes Fabricated via Mist-Assisted Non-Solvent Induced Phase Separation (MA-NIPS) for Water Desalination. Masters thesis, King Fahd University of Petroleum and Minerals.

Chemical and Structural Modification of Mxene-based Nanofibers Membrane for High Performance Membrane Distillation. Masters thesis, King Fahd University of Petroleum and Minerals.

“Design and Simulation of Chemical Recycling of Waste Plastic to Olefins by Thermochemical Routes”. Masters thesis, King Fahd University of Petroleum and Minerals.

Optimal Design Strategies for Hybrid Membrane Distillation Separation Systems. Masters thesis, King Fahd University of Petroleum and Minerals.

Modeling of Sorption Enhanced Steam Methane Reforming Process in Dual Fluidized Bed Reactors. Masters thesis, King Fahd University of Petroleum and Minerals.

DEVELOPMENT OF AN EQUATION OF STATE FOR LENNARD-JONES FLUIDS USING SYMBOLIC AI. Masters thesis, King Fahd University of Petroleum and Minerals.

Simultaneous Removal of Organic Pollutants from Wastewater and H2S scavenging from Sour gas using LTH/ZIF based Composite in a Single System. Masters thesis, King Fahd University of Petroleum and Minerals.

An Integrated Approach to Biodiesel Production from Waste Cooking Oil Using Waste-Derived Catalysts and its Application in Oil-Based Drilling Fluids. Masters thesis, King Fahd University of Petroleum and Minerals.

Compositional Engineering and Crystallization Dynamics in FA(x)MA(1-x)PbI₃ Perovskite Solar Cells. Masters thesis, King Fahd University of Petroleum and Minerals.

Reaction Engineering and Mechanistic Study of CKD-Based Ex-Situ CO₂ Indirect Mineralization. Masters thesis, King Fahd University of Petroleum and Minerals.

Simulation of Solar-powered Adsorption Desalination System Employing CPO-27(Ni). Masters thesis, King Fahd University of Petroleum and Minerals.

Rational Design of Metal Oxide/g-C₃N₄ Composites via Mechanochemical Synthesis for Removal of Hazardous Dyes in Wastewater. Masters thesis, King Fahd University of Petroleum and Minerals.

COMPUTATIONAL DESIGN OF INNOVATIVE INTERLAYERS TO ENHANCE ELECTROLYTE ELECTRODE INTERFACE STABILITY IN LITHIUM METAL BATTERIES. Masters thesis, King Fahd University of Petroleum and Minerals.

ENGINEERING NICKEL-BASED CATALYSTS FOR EFFICIENT LOW-TEMPERATURE AMMONIA DECOMPOSITION FOR HYDROGEN STORAGE TECHNOLOGIES. Masters thesis, King Fahd University of Petroleum and Minerals.

Application of Combined Adsorption and Reforming for Blue Hydrogen Production: Experimental and Numerical Investigations. PhD thesis, King Fahd University of Petroleum and Minerals.

Enhancing Performance of Solar-Powered MED: Effect of increasing TBT and Fouling. Masters thesis, King Fahd University of Petroleum and Minerals.

TANDEM VOX/ZSM-5 CATALYST FOR N-HEXANE CATALYTIC CRACKING TO PRODUCE OLEFIN. PhD thesis, King Fahd University of Petroleum and Minerals.

Data-driven Modeling Control and Optimization of Fluid Catalytic Cracking process. PhD thesis, King Fahd University of Petroleum and Minerals.

Transition Metal Substitution Effects in CaCu3Ti4O12 Giant Dielectric Ceramics. Masters thesis, King Fahd University of Petroleum and Minerals.

Novel Catalyst for High Purity Hydrogen Generation via Ammonia Decomposition. PhD thesis, King Fahd University of Petroleum and Minerals.

Gas in Scattering Media Absorption Spectroscopy (GASMAS) of O2 and H2O Gasses Confined in Mesoporous Alumina and Silica. PhD thesis, King Fahd University of Petroleum and Minerals.

Techno-economic and Environmental Impact Assessments of Zeolitic-Imidazole Framework-8 (ZIF-8) Based Electrodes for Anion Exchange Membrane Electrolysis. Masters thesis, King Fahd University of Petroleum and Minerals.

Design, Synthesis, and Electrochemical Evaluation of Functionalized PIMA-Based Polymers for High-Performance Aqueous Redox Flow Batteries. Masters thesis, King Fahd University of Petroleum and Minerals.

Investigation of Chemical Kinetics of Hydrogen Sulfide. Masters thesis, King Fahd University of Petroleum and Minerals.

CATALYTIC CONVERSION OF METHANE FOR HYDROGEN PRODUCTION USING A CHEMICAL LOOPING PROCESS IN A FLUIDIZED BED REACTOR. PhD thesis, King Fahd University of Petroleum and Minerals.

Investigation of Hydrogen Storage Technologies for Saudi Arabia's Energy Transition via Pythagorean Fuzzy Logic and Techno-Economic Analysis. Masters thesis, King Fahd University of Petroleum and Minerals.

Fabrication, Characterization, and Performance Evaluation of Polypropylene/Polyolefin Elastomer Composite. Masters thesis, King Fahd University of Petroleum and Minerals.

Functional Ink Formulation and Redox-Enhanced Electrolyte Design for Screen-Printed Flexible Micro-Supercapacitors. Masters thesis, King Fahd University of Petroleum and Minerals.

Experimental Study of Nitrogen-Diluted Hydrogen Combustion and Assessment of Hydrogen Flame Stability in Can Combustors. Masters thesis, King Fahd University of Petroleum and Minerals.

Formulation of Water-Based Drilling Fluids using Novel Layered Triple Hydroxide/Oxide: Rheology, Filtration, and H2S Scavenging Performance. Masters thesis, King Fahd University of Petroleum and Minerals.

Simultaneous Removal of Dyes from Wastewater and H2S Scavenging from Natural Gas. Masters thesis, King Fahd University of Petroleum and Minerals.

Fabrication of Co212 Superalloy Reinforced with cBN via Spark Plasma Sintering: Insights into Mechanical, Thermal, and Corrosion Properties. Masters thesis, King Fahd University of Petroleum and Minerals.

From Lab to Data-Intelligence Modelling: Redefining Oil-in-Water and Molecular Separation with Machine Learning-Optimized Hydroxylated MXene and graphene oxide Membranes. Masters thesis, King Fahd University of Petroleum and Minerals.

Hydrogen and Value-added Chemicals from Catalytic Pyrolysis of Crude Oils using Microwave Heating. Masters thesis, King Fahd University of Petroleum and Minerals.

Lanthanide-Promoted Ni-Based Catalysts for Enhanced Syngas Production via Dry Reforming of Methane. Masters thesis, King Fahd University of Petroleum and Minerals.

A Comparative Study of Rhodium-Based Catalysts on TiO2 and CeO2 Supports for CO2 Reforming of Ethane. Masters thesis, King Fahd University of Petroleum and Minerals.

Efficient removal of organic dyes and pharmaceuticals by ZIF-based composites. Masters thesis, King Fahd University of Petroleum and Minerals.

Design and simulation of Petroleum Coke conversion to blue ammonia with low carbon emissions. Masters thesis, King Fahd University of Petroleum and Minerals.

Hydrogen production through sorption-enhanced steam methane reforming using highly stable Ni-Cu/CaO-MgO bifunctional material. Masters thesis, King Fahd University of Petroleum and Minerals.

Novel Synthesis of Core-Shell Thin Films for Hydrogen Sensing Application. Masters thesis, King Fahd University of Petroleum and Minerals.

Bioremediation of Desalinated Produced Water (DPW) From The Saudi Aramco Oil Industry. Masters thesis, King Fahd University of Petroleum and Minerals.

Sensing and Removal Mercury Using Lanthanide Metal-Organic Frameworks (MOFs). Masters thesis, King Fahd University of Petroleum and Minerals.

Enhanced CO2 Mineralization in Saline Aquifers using Alkaline Earth Metals. Masters thesis, King Fahd University of Petroleum and Minerals.

SYNTHESIS OF HIERARCHICAL ZSM-5 ZEOLITES WITH UNIQUE MORPHOLOGIES AND TUNABLE SiO2/Al2O3 RATIOS FOR DRY REFORMING OF METHANE. Masters thesis, King Fahd University of Petroleum and Minerals.

Ag-Zn alloy decorated with sputtered thin films for electrochemical CO2 reduction. Masters thesis, King Fahd University of Petroleum and Minerals.

Machine Learning Model for Predicting Shifts in Gas Chromatography Retention Time Caused by The Change of Experiment. Masters thesis, King Fahd University of Petroleum and Minerals.

Machine Learning Models for Municipal Solid Waste Pyrolysis. Masters thesis, King Fahd University of Petroleum and Minerals.

Investigation of the impact of alloying elements in austenitic stainless steel on hydrogen embrittlement for hydrogen energy infrastructure applications using density functional theory. Masters thesis, King Fahd University of Petroleum and Minerals.

Engineering of Recyclable 6FDA-Based Polyimide Membranes for Desalination in Membrane Distillation. Masters thesis, King Fahd University of Petroleum and Minerals.

Investigation of the Pore Structures of Hierarchical Y and ZSM-5 Zeolites for Fluid Catalytic Cracking Catalyst via Experimental and Computational Approaches. Masters thesis, King Fahd University of Petroleum and Minerals.

REVERSE OSMOSIS CHANNEL SHAPE OPTIMIZATION. Masters thesis, King Fahd University of Petroleum and Minerals.

Thermally-Sintered Aluminum Composites with Low Melting Point Metals for Hydrogen Production Through Water Splitting Reaction. Masters thesis, King Fahd University of Petroleum and Minerals.

Covalent Organic Frameworks(COF) Based Membranes for Desalination and Boron Removal. Masters thesis, King Fahd University of Petroleum and Minerals.

Effect of SiO2 Encapsulation on Dry Reforming of Methane over Ni/MeOx-Al2O3 Catalysts in a Fluidized Bed Reactor. Masters thesis, King Fahd University of Petroleum and Minerals.

Solid Fuel from Torrefied Chlorella pyrenoidosa Microalgae Biomass: Production and Characterization. Masters thesis, King Fahd University of Petroleum and Minerals.

Microalgae: Integrated Approach of CO2 capture, wastewater treatment and Bioplastic production. Masters thesis, King Fahd University of Petroleum and Minerals.

Improvement of Desalination Productivity with Intermittent Impermeable Segments. Masters thesis, King Fahd University of Petroleum and Minerals.

o-Pyrolysis of spirulina platensis and Plastic Waste for Production of Sustainable Chemicals. Masters thesis, King Fahd University of Petroleum and Minerals.

INTEGRATIVE OMICS ANALYSIS FOR THE IDENTIFICATION OF KEY GENOMIC BIOMARKERS DRIVING TUMOREGENSIS IN LUNG ADENOCARCINOMA PATIENTS. Masters thesis, King Fahd University of Petroleum and Minerals.

Ammonia Electrooxidation Reaction using Transition Metal based Catalysts Towards Hydrogen Production: An Experimental and Computational Approach. Masters thesis, King Fahd University of Petroleum and Minerals.

On Using Machine-Learning Techniques to Predict Two-phase Flow Characteristics in Inclined Pipes. PhD thesis, King Fahd University of Petroleum and Minerals.

CO2 Assisted Oxidative Dehydrogenation (ODH) of LPG to Olefins. PhD thesis, King Fahd University of Petroleum and Minerals.

Numerical Investigation of Integrated Ammonia Synthesis Utilizing Multi-Stage Ammonia Production. Masters thesis, King Fahd University of Petroleum and Minerals.

Microalgal Bioremediation of Organic Pollutants and Heavy Metals from Petroleum Derived Produced Water. PhD thesis, King Fahd University of Petroleum and Minerals.

MnOx/VOx ON ZEOLITE CATALYSTS FOR OXIDATIVE CRACKING OF NAPHTHA TO OLEFINS: EVALUATION AND KINETICS. Masters thesis, King Fahd University of Petroleum and Minerals.

Process Intensification of Hydrogen Production via Steam Methane Reforming with Palladium Membrane Technology. Masters thesis, King Fahd University of Petroleum and Minerals.

Free-radical emulsion copolymerization of ethylene and butyl acrylate monomers: synthesis and property evaluation. Masters thesis, King Fahd University of Petroleum and Minerals.

Predicting Density and Surface Tension for Oxygenated Fuel Blends using Artificial Neural Networks. Masters thesis, King Fahd University of Petroleum and Minerals.

Implementation Of AI in Smoke Point Prediction. Masters thesis, King Fahd University of Petroleum and Minerals.

Predicting algae growth potential in different regions of Saudi Arabia by using energy and biological growth modeling. Masters thesis, King Fahd University of Petroleum and Minerals.

MOLECULAR FUEL DESIGN AND MODELING USING ARTIFICIAL INTELLIGENCE. PhD thesis, King Fahd University of Petroleum and Minerals.

Investigation of CO2 Hydrate Formation Kinetics and Pore-Scale Dynamics for Enhanced Carbon Sequestration. Masters thesis, King Fahd University of Petroleum and Minerals.

Production of High-Value Carbon Fiber from Low-Value Heavy - Petroleum Fractions. Masters thesis, King Fahd University of Petroleum and Minerals.

Towards a Safe Hydrogen Economy: Addressing Safety and Siting for Refueling Stations. Masters thesis, King Fahd University of Petroleum and Minerals.

Evaluating the Efficiency of Zeolite-Based Adsorbents for Hydrofluorocarbon Using Molecular Dynamics. Masters thesis, King Fahd University of Petroleum and Minerals.

The aromatization of light naphtha via modified fibrous silica ZSM5 with Gallium and Zinc. Masters thesis, King Fahd University of Petroleum and Minerals.

A Sustainable Approach for Power Generation from Waste Plastic. Masters thesis, King Fahd University of Petroleum and Minerals.

Advancing PET Recycling: The Application of Novel Catalysts in Depolymerization Process. Masters thesis, King Fahd University of Petroleum and Minerals.

Optimization and Functionalization of Porous Polymers for Post-Combustion Carbon Capture. Masters thesis, King Fahd University of Petroleum and Minerals.

Effect of reduced graphene oxide content on the morphology and structure of egg shell derived magnesium doped hydroxyapatite composite using microwave processing. Masters thesis, King Fahd University of Petroleum and Minerals.

Enhanced Power Control Management for Direct Methanol Fuel Cell/Battery Hybrid system by Dual Threshold Control. Masters thesis, King Fahd University of Petroleum and Minerals.

Novel and sustainable integration of R-152a hydrate-based desalination system with a double-effect absorption refrigeration cycle. Masters thesis, King Fahd University of Petroleum and Minerals.

Design Development of Integrated Methane Pyrolysis and Reforming Processes for Low-Carbon Ammonia Production. Masters thesis, King Fahd University of Petroleum and Minerals.

COMB-SHAPED AMPHIPHILIC POLYMERS FOR MEMBRANE FOULING TREATMENT. Masters thesis, King Fahd University of Petroleum and Minerals.

Preparation of Sodium Bicarbonate Activated Carbon from Chlorella Pyrenoidosa for Wastewater Treatment. Masters thesis, King Fahd University of Petroleum and Minerals.

A SELF-CONSISTENT THEORY FOR MODELLING INTERFACIAL AND BULK PROPERTIES. PhD thesis, King Fahd University of Petroleum and Minerals.

Synergizing Optimized Electrode-Electrolyte Interface for High Energy Density Supercapacitors Application. Masters thesis, King Fahd University of Petroleum and Minerals.

Synthesis and Characterization of Ethylene−Alpha-olefin Metallocene Elastomers. Masters thesis, King Fahd University of Petroleum and Minerals.

Hydrogen separation with a Pd-Pt membrane (DFT investigation). Masters thesis, King Fahd University of Petroleum and Minerals.

Optimal Design of a Membrane Reactor Coupling Dehydrogenation of Propane to Propylene with Hydrogenation of Nitrobenzene to Aniline. Masters thesis, King Fahd University of Petroleum and Minerals.

Application of SAFT-AC model to refrigerant systems. Masters thesis, King Fahd University of Petroleum and Minerals.

Drag Reduction of Emulsified Acid System in Pipes. PhD thesis, King Fahd University of Petroleum and Minerals.

ENHANCED THERMO-CATALYTIC METHANATION OF CARBON-DIOXIDE FOR SYNTHETIC NATURAL GAS PRODUCTION. Masters thesis, King Fahd University of Petroleum and Minerals.

Modified Silica Supported Catalyst for 1,3-Butadiene Production via Oxidative Dehydrogenation (ODH) of n-Butane. Masters thesis, King Fahd University of Petroleum and Minerals.

DEVELOPMENT OF FIRE-RESISTANT POLYSTYRENE COMPOSITES FOR THERMAL INSULATION OF BUILDINGS. Masters thesis, King Fahd University of Petroleum and Minerals.

Mxene-Metal Oxide Nanocomposites for Enhancing CO2 Electrochemical Reduction to Valuable Products. Masters thesis, King Fahd University of Petroleum and Minerals.

Sputtered Vanadium-based Cathode for Zinc Ion Battery. Masters thesis, King Fahd University of Petroleum and Minerals.

In Situ Synthesis and Characterization of Ethylene-based Copolymers, Terpolymers and Composites. Masters thesis, King Fahd University of Petroleum and Minerals.

Microwave Catalytic Pyrolysis of Waste Plastic. Masters thesis, King Fahd University of Petroleum and Minerals.

FACILE PREPARATION OF COMPOSITE PVA/CERAMIC MEMBRANE FOR PRODUCED WATER TREATMENT. Masters thesis, King Fahd University of Petroleum and Minerals.

Controlled Autoxidation of Heavy Petroleum for Carbon Fibre Precursors. Masters thesis, King Fahd University of Petroleum and Minerals.

Multiscale Adsorption and Diffusion Studies in unconventional Shale Gas Reservoirs. PhD thesis, King Fahd University of Petroleum and Minerals.

Screening and production of Antimicrobial Agents from Thermophilic Bacteria Isolated from Hot Springs of Saudi Arabia. Masters thesis, King Fahd University of Petroleum and Minerals.

Studies on the crystallinity of LLDPE and its nanocomposites. Masters thesis, King Fahd University of Petroleum and Minerals.

Solid State Welding for Improving Joint Integrity of Aluminum Silos. Masters thesis, King Fahd University of Petroleum and Minerals.

Assessment and optimization of integrated unmanned aerial vehicles with different renewable energy sources. Masters thesis, King Fahd University of Petroleum and Minerals.

Treatment of Complex Synthetic Wastewater by Layered Triple Hydroxide (LTH)/Graphene/Bentonite Nanocomposites. Masters thesis, King Fahd University of Petroleum and Minerals.

A novel desiccant-based humidification-dehumidification system to harvest freshwater from the atmospheric air. PhD thesis, King Fahd University of Petroleum and Minerals.

Integration of Sorption and Humidification-Dehumidification Technologies in Hybrid Desalination/Cooling Systems. PhD thesis, King Fahd University of Petroleum and Minerals.

Bifurcation Analysis of Multi-parameter Equations of State. Masters thesis, King Fahd University of Petroleum and Minerals.

CO2-Assisted Oxidative Dehydrogenation of Propane to Propylene Over Vanadium-based and Boron-modified Supported Oxide Catalysts. PhD thesis, King Fahd University of Petroleum and Minerals.

Tribological Behaviour of Aluminum Hybrid Nanocomposites reinforced with Alumina and Graphene Oxide. Masters thesis, King Fahd University of Petroleum and Minerals.

Synthesis and Functionalizing of Carbon-Based Electrocatalysts for the Electrochemical Reduction of Carbon Dioxide. Masters thesis, King Fahd University of Petroleum and Minerals.

Performance Evaluation of a Novel Integration of a Direct Contact Membrane Distillation System with an Adsorption Desalination System. Masters thesis, King Fahd University of Petroleum and Minerals.

Design and Simulation of Power-to-Liquid Processes by utilization of Vacuum Residue from Oil Refineries. PhD thesis, King Fahd University of Petroleum and Minerals.

Development of Sampling Methods and Analysis of Beryllium in Fume Dust using Filters. Masters thesis, King Fahd University of Petroleum and Minerals.

Optimal Operation Management of Multigeneration Hydrogen Plant. Masters thesis, King Fahd University of Petroleum and Minerals.

Sulfate ions removal from seawater using Polyamide thin-film composite Nanofiltration membrane. Masters thesis, King Fahd University of Petroleum and Minerals.

Growth and Pyrolysis Kinetics of Gonium Pectorale to Evaluate its CO2 Fixation and Energy Potential. Masters thesis, King Fahd University of Petroleum and Minerals.

Sweeping Air Membrane Distillation Integrated with Bubble Column Dehumidifier for Water Desalination. Masters thesis, King Fahd University of Petroleum and Minerals.

Conversion of Waste Plastics (PE and PP) to Hydrogen Fuel and Methanol: Techno-Economic Analysis. Masters thesis, King Fahd University of Petroleum and Minerals.

Fabrication of Layered zeolite for heavy oil conversion. Masters thesis, King Fahd University of Petroleum and Minerals.

A Methodology for Designing Octane Number of Fuels Using Genetic Algorithms and Artificial Neural Networks. Masters thesis, King Fahd University of Petroleum and Minerals.

Multi-period Optimization of Organic Rankine Cycles (ORC) Design Under Waste Heat Load Variability. Masters thesis, King Fahd University of Petroleum and Minerals.

Carbon-nanostructures based materials for removal of organic contaminants from wastewater. Masters thesis, King Fahd University of Petroleum and Minerals.

A Study of Forward Osmosis Desalination System Integrated with Distillation Column as Separation Unit. Masters thesis, King Fahd University of Petroleum and Minerals.

Crude oil-in-water nanoemulsions stabilized by biosurfactant: stability, rheological, interfacial tension, zeta potential and size measurements studies. Masters thesis, King Fahd University of Petroleum and Minerals.

Ni-Doped-Bi-O Supported Catalysts for Selective Oxidative Dehydrogenation of N-Butane to Butadiene. Masters thesis, King Fahd University of Petroleum and Minerals.

Synthesis, Characterization and Modification of Ferrierite (FER) Catalysts for CO2 Reforming of Methane. Masters thesis, King Fahd University of Petroleum and Minerals.

Evaluating Potential of Date-Palm Biochar for Arsenic Removal from Water, Coupled with Spectral-Induced Polarization (SIP) for Real-Time Monitoring. Masters thesis, King Fahd University of Petroleum and Minerals.

Design and simulation of Steam Membrane Reforming Process for Hydrogen production. Masters thesis, King Fahd University of Petroleum and Minerals.

FUNCTIONALIZED POLYMER-BASED MATERIALS AS SCALE AND CORROSION INHIBITORS. Masters thesis, King Fahd University of Petroleum and Minerals.

The investigations on the modified Y-zeolite based FCC catalyst: Effect of Zeolite to Matrix ratio. Masters thesis, King Fahd University of Petroleum and Minerals.

The significance of modeling electrodialysis desalination using multi-component saline water. Masters thesis, King Fahd University of Petroleum and Minerals.

Impact of friction stir processing on mechanical, microstructural, tribological and electrochemical properties of aluminum alloys. Masters thesis, King Fahd University of Petroleum and Minerals.

Understanding demulsification and demulsification mechanism of different oil-water system. Masters thesis, King Fahd University of Petroleum and Minerals.

Polysulfone Mixed Matrix Membranes Containing ZIF-95 as a Filler for Gas Separation Applications. Masters thesis, King Fahd University of Petroleum and Minerals.

TREATMENT OF AQUEOUS SELENOCYANATE USING COBINED TiO2 MgAl LDH PHOTOCATALYSIS. Masters thesis, King Fahd University of Petroleum and Minerals.

Metal Oxides Supported on Nitrogen Doped Carbon Based as Efficient Adsorbents for CO2 Capture. Masters thesis, King Fahd University of Petroleum and Minerals.

In-Line Generation of oil-in-water and water in oil emulsions. Masters thesis, King Fahd University of Petroleum and Minerals.

Oxidative cracking of n-hexane to light olefins over MgO/SrO Modified VOx/Al2O3 catalysts. Masters thesis, King Fahd University of Petroleum and Minerals.

Novel MOx/La2O3-γAl2O3 (M=Mo, V, Ga) for CO2 Assisted Oxidative Dehydrogenation of Propane to Propylene. Masters thesis, King Fahd University of Petroleum and Minerals.

NP - Nutrients Removal from Municipal Tertiary Wastewater using SD (Scenedesmus dimorphus microalgae species). Masters thesis, King Fahd University of Petroleum and Minerals.

HYDROGEN FLUORIDE MODIFIED DUST FOR SELF CLEANING APPLICATIONS. Masters thesis, King Fahd University of Petroleum and Minerals.

Effects of Biosurfactant and Chemical Surfactants on the Enzymatic Remediation of Bisphenol A from Wastewater. Masters thesis, King Fahd University of Petroleum and Minerals.

Design and Simulation of Ethane-CO2 Separation Using Extractive Distillation in NGL Fractionation Processes. Masters thesis, King Fahd University of Petroleum and Minerals.

Aromatization of Light Naphtha. Masters thesis, King Fahd University of Petroleum and Minerals.

Synthesis of resins containing chelating residues of aspartic, maleic and aminomethylphosphonic acids for mitigation of toxic contaminants. Masters thesis, King Fahd University of Petroleum and Minerals.

CO2 CAPTURE AT AMBIENT CONDITION USING AMINE-FUNCTIONALIZED MAGNESIUM OXIDE AND GRAPHENE DERIVATIVES NANO-COMPOSITES. Masters thesis, King Fahd University of Petroleum and Minerals.

Susceptibility to Pitting Corrosion of CrMn-Stainless Steel Exposed to Sour Drilling Environment. Masters thesis, King Fahd University of Petroleum and Minerals.

Modeling of Hydrate Phase Transition using Mean Spherical Approximation (MSA) Model. Masters thesis, King Fahd University of Petroleum and Minerals.

Design and Simulation for the Sweetening of High CO2 Content Natural Gas. Masters thesis, King Fahd University of Petroleum and Minerals.

Modified Mesoporous Supported Ni(Co)Mo-S for Hydrodesulfurization Applications. PhD thesis, King Fahd University of Petroleum and Minerals.

Novel process for oxidative dehydrogenation of LPG to high value olefins: catalyst design and kinetic modelling. PhD thesis, King Fahd University of Petroleum and Minerals.

Design and Simulation of Methanol Production by CO2 Utilization. Masters thesis, King Fahd University of Petroleum and Minerals.

Novel Metallocalixarenes as Dispersed Catalysts for Heavy Oil Upgrading. Masters thesis, King Fahd University of Petroleum and Minerals.

Thermal and Catalytic Cracking of Arabian Light Crude Oil to Light Olefins. Masters thesis, King Fahd University of Petroleum and Minerals.

CHARACTERIZATION OF LOCALLY ISOLATED MICROALGAE PARACHLORELLA KESSLERI FOR CO2 FIXATION AND BIOFUEL PRODUCTION. Masters thesis, King Fahd University of Petroleum and Minerals.

Optimization of Microalgae’s Culture Conditions for CO2 Fixation, Biomass Productivity and Wastewater Treatment. Masters thesis, King Fahd University of Petroleum and Minerals.

Preparation of Molybdenum Based Catalysts Supported on Alumina for Hydrodesulfurization of Liquid Fuels. Masters thesis, King Fahd University of Petroleum and Minerals.

LDHs Based Nanosorbents for Removal of Anionic Dyes. Masters thesis, King Fahd University of Petroleum and Minerals.

Ion-Induced Modifications in Gallium Phosphide single crystals. Masters thesis, King Fahd University of Petroleum and Minerals.

Enhancing water based drilling fluid performance using polymers and nanoparticles. Masters thesis, King Fahd University of Petroleum and Minerals.

A FRAMEWORK FOR SINGLE AND MULTIPLE ANOMALIES LOCALIZATION IN PIPELINES. Masters thesis, King Fahd University of Petroleum and Minerals.

NOVEL Ni/Ce-Al2O3 CATALYSTS FOR BIOMASS GASIFICATION: KINETICS AND THERMODYNAMIC STUDIES. PhD thesis, King Fahd University of Petroleum and Minerals.

Development and Characterization of Electrospun Polyacrylonitrile-based Nanocomposite Membranes for Oil-Water Separation. Masters thesis, King Fahd University of Petroleum and Minerals.

methanol to olefins using modified SAPO-34 zeolite. Masters thesis, King Fahd University of Petroleum and Minerals.

Design and Simulation of Natural Gas Processing. Masters thesis, King Fahd University of Petroleum and Minerals.

SYNTHESIS AND CHARACTERISATION OF SILICALITE-1 SUPPORTED NICKEL-BASED CATALYSTS FOR CO2 REFORMING OF METHANE. Masters thesis, King Fahd University of Petroleum and Minerals.

COST-EFFECTIVE CATALYST DERIVED FROM NATURAL ZEOLITES THROUGH BALL MILLING AND RECRYSTALLIZATION METHOD FOR HYDROCARBON CONVERSION. PhD thesis, King Fahd University of Petroleum and Minerals.

Synthesis and characterization of a novel Chabazite (CHA) zeolite catalyst for the conversion of methanol to olefins (MTO) reaction. Masters thesis, King Fahd University of Petroleum and Minerals.

Preparation of metal oxide Nano particle-modified porous carbon electrode for oxygen evolution reaction. Masters thesis, King Fahd University of Petroleum and Minerals.

Fabrication of Mixed Matrix Membranes using Polyimide and ZIFs for CO2 separation. Masters thesis, King Fahd University of Petroleum and Minerals.

Global Optimization and Thermodynamic Analysis of the Heat Exchanger Network in Process Industries. PhD thesis, King Fahd University of Petroleum and Minerals.

Physical Adsorption of Carbon Dioxide Capture by Novel Materials. PhD thesis, King Fahd University of Petroleum and Minerals.

THERMODYNAMIC MODELING OF THE INCIPIENT CONDITIONS FOR SINGLE AND MIXED GAS HYDRATE SYSTEMS. Masters thesis, King Fahd University of Petroleum and Minerals.

Selective Production of Propylene from Methanol using Monolith Structured Zeolite and Modified Zeolite ZSM-5 Catalysts. Masters thesis, King Fahd University of Petroleum and Minerals.

Melt crystallization and thermal degradation kinetics of polypropylene/graphene nanocomposites. Masters thesis, King Fahd University of Petroleum and Minerals.

Mixed matrix membrane for CO2 separation from natural gas. Masters thesis, King Fahd University of Petroleum and Minerals.

POLYSULFONE/CARBIDE DERIVED CARBON MIXED MATRIX MEMBRANE FOR CO2 SEPARATION IN NATURAL GAS. Masters thesis, King Fahd University of Petroleum and Minerals.

Thermodynamic analysis for a combined solar LiBr-H2O absorption system with a single effect evaporation cycle. Masters thesis, King Fahd University of Petroleum and Minerals.

Developing Ceria-Based Nanocomposites for Hydrocarbon Cracking. Masters thesis, King Fahd University of Petroleum and Minerals.

Development of SSZ-54 catalyst for catalytic cracking of alkanes for production of light olefins. Masters thesis, King Fahd University of Petroleum and Minerals.

Oxidative Dehydrogenation Of n-Butane To 1,3-Butadiene over Bi-Modified Ni-O Catalyst. Masters thesis, King Fahd University of Petroleum and Minerals.

Thermodynamic Balancing of the Regeneration Process in a Novel Liquid Desiccant Cooling System by Extraction Technology. Masters thesis, King Fahd University of Petroleum and Minerals.

Carbon- based Nanomaterials for adsorptive desulfurization of selected Sulfur Compounds from Liquid Fuels. Masters thesis, King Fahd University of Petroleum and Minerals.

Synthesis of novel carbon nanotube membranes for applications in water treatment. PhD thesis, King Fahd University of Petroleum and Minerals.

Thermally Rearranged Polymeric Membrane for Natural Gas Separation. Masters thesis, King Fahd University of Petroleum and Minerals.

MODIFIED Fe2O3/SiO2-AL2O3 FOR TAR CRACKING IN BIOMASS GASIFICATION. Masters thesis, King Fahd University of Petroleum and Minerals.

Processing and Thermal Behaviour of Alumina Hybrid Nanocomposites. Masters thesis, King Fahd University of Petroleum and Minerals.

Co, Fe ,Mo BASED OIL SOLUBLE DISPERSED CATALYST FOR HYDROCRACKING OF HEAVY OIL. Masters thesis, King Fahd University of Petroleum and Minerals.

Catalytic Conversion of C5 Olefins to Propylene by Metathesis Reactions. Masters thesis, King Fahd University of Petroleum and Minerals.

Effect of microwave radiations on electrical, mechanical and thermal properties of Poly (vinyl alcohol) nano composite films. Masters thesis, King Fahd University of Petroleum and Minerals.

Zeolite Catalysts for the Catalytic Cracking of Higher Olefins to Basic Petrochemicals. Masters thesis, King Fahd University of Petroleum and Minerals.

Maximizing Light Olefins yield from the Fluid Catalytic Cracking of Whole Crude Oil. Masters thesis, King Fahd University of Petroleum and Minerals.

Effect of Nano fillers on the production and properties od LLDPE using In-Situ Polymerization. PhD thesis, King Fahd University of Petroleum and Minerals.

A STUDY OF THE ADSORPTION/DESORPTION OF METHANE/CARBON DIOXIDE ON THE SURFACE OF DIFFERENT RESERVOIR ROCKS. Masters thesis, King Fahd University of Petroleum and Minerals.

Graphene reinforced eco-friendly water soluble polymers. PhD thesis, King Fahd University of Petroleum and Minerals.

A Novel Approach to Formulation of Emulsified Acid Using Waste Oil. Masters thesis, King Fahd University of Petroleum and Minerals.

Modelling and Control of Capacitive De-ionization Desalination System. Masters thesis, King Fahd University of Petroleum and Minerals.

A STUDY ON ACCELERATED CARBONATION CURING OF CONCRETE. Masters thesis, King Fahd University of Petroleum and Minerals.

Water desalination using carbide derived carbon (CDC) / polymer nano-composite membrane. Masters thesis, King Fahd University of Petroleum and Minerals.

Carbon Molecular sieve membranes for oxygen separation. Masters thesis, King Fahd University of Petroleum and Minerals.

A Numerical Study of Shale Gas Flow in Tight Porous Media Through Nonlinear Transport Models. PhD thesis, King Fahd University of Petroleum and Minerals.

Highly Dispersed and Stable Bi-modified Ni-O catalyst for Oxidative Dehydrogenation of n-Butane to Butadiene. Masters thesis, King Fahd University of Petroleum and Minerals.

Removal of Mercury (II) from Water using Biosynthesized silver and Iron Oxide nanoparticles. Masters thesis, King Fahd University of Petroleum and Minerals.

SYNTHESIS OF NEW CROSS-LINKED MELAMINE BASED POLYAMINES IMPREGNATED CARBON NANOTUBE COMPOSITES FOR TOXIC METAL ION REMOVAL. Masters thesis, King Fahd University of Petroleum and Minerals.

Graphene Transfer onto PP, PES and PVDF polymeric substrates: Development of water purification membranes. PhD thesis, King Fahd University of Petroleum and Minerals.

Critical Evaluation of the Pitfalls in the PVT Behavior Arising from Hard-Sphere Chain and Association Theories. Masters thesis, King Fahd University of Petroleum and Minerals.

Evaluation of Various References and Perturbation Terms of the Thermodynamic Perturbation Theory of the First Order. Masters thesis, King Fahd University of Petroleum and Minerals.

Mn on Ce modified Al2O3 oxygen carrier for liquid fuel based chemical looping combustion. Masters thesis, King Fahd University of Petroleum and Minerals.

HEAVY OIL UPGRADING USING DISPERSED CATALYST. Masters thesis, King Fahd University of Petroleum and Minerals.

Optimal Design and Retrofit of Three Product Divided Wall Distillation Column. Masters thesis, King Fahd University of Petroleum and Minerals.

Optimal Operation and Control of four product Kaibel Distillation Column. Masters thesis, King Fahd University of Petroleum and Minerals.

Surface modified zeolite catalysts for the hydrous pyrolysis of heavy oil. Masters thesis, King Fahd University of Petroleum and Minerals.

Kinetic Modelling of the Hydrosilylation Reaction of CO2 Using Iridium (III) complex Catalyst. Masters thesis, King Fahd University of Petroleum and Minerals.

Production of high purity Multi wall carbon nanotubes from p-Xylene and ferrocene by using vertical chemical vapor deposition reactor fitted with an ultrasonic atomizing head. Masters thesis, King Fahd University of Petroleum and Minerals.

FOULING MITIGATION OF REVERSE OSMOSIS MEMBRANES USING LAYER BY LAYER DEPOSITION OF POLYELECTROLYTES. Masters thesis, King Fahd University of Petroleum and Minerals.

Development and characterization of mixed-matrix membranes for carbon dioxide seperation. PhD thesis, King Fahd University of Petroleum and Minerals.

Removal of Ammonia from water using modified nanomaterials. Masters thesis, King Fahd University of Petroleum and Minerals.

Design and Fabrication of Dye sensitized solar cell using self-synthesized quaternary (TiO2/ZnO/CdS/Graphene) nanocomposite by Pulsed Laser Ablation Technique. Masters thesis, King Fahd University of Petroleum and Minerals.

FLUIDIZED-BED OXIDATIVE DEHYDROGENATION OF n-BUTANE TO BUTENE OVER VOX/Ce-Al2O3: CATALYST DEVELOPMENT AND REACTION KINETICS. Masters thesis, King Fahd University of Petroleum and Minerals.

Enhanced propylene production by catalytic cracking of hydrotreated VGO over novel FCC catalyst additives. Masters thesis, King Fahd University of Petroleum and Minerals.

CO2 capture from liquid fuel based power plants using CLC: Thermodynamic modeling and Ni-Fe oxygen carrier development. Masters thesis, King Fahd University of Petroleum and Minerals.

OXIDATIVE DEHYDROGENATION OF PROPANE TO PROPYLENE OVER VOx/CaO-γAl2O3 IN A FLUIDIZED BED. Masters thesis, King Fahd University of Petroleum and Minerals.

Novel additives for side chain alkylation of toluene and methanol to form styrene. Masters thesis, King Fahd University of Petroleum and Minerals.

Electrochemical Reduction of CO2. Masters thesis, King Fahd University of Petroleum and Minerals.

Preparation, characterization and performance evaluation of monolith based zeolite coated catalyst for the conversion of methanol to propylene. Masters thesis, King Fahd University of Petroleum and Minerals.

Conversion of carbon dioxide to methane and carbon monoxide using alumina based catalysts. Masters thesis, King Fahd University of Petroleum and Minerals.

Photocatalytic Conversion of CO2 into hydrocarbons using Cu/Zn-TiO2 catalyst. Masters thesis, King Fahd University of Petroleum and Minerals.

Biochemical wastewater treatment using immobilized lipase on multi-wall carbon nanotubes. Masters thesis, King Fahd University of Petroleum and Minerals.

Synthesis, Characterization and Application of polysulfone/Nanofiller Nanocomposite Membrane for Water Purification. Masters thesis, King Fahd University of Petroleum and Minerals.

Bifurcation and Stability Analysis of Multiple Molar Volume Roots for Statistical Associating Fluid Theory. Masters thesis, King Fahd University of Petroleum and Minerals.

Development of new dye sensitized materials for solar cell applications. PhD thesis, King Fahd University of Petroleum and Minerals.

Application of Raw and Modified Carbon Nanotubes for Adsorption of Btx Compounds From Water. Masters thesis, King Fahd University of Petroleum and Minerals.

INFLUNCE OF SURFACTANTS ON THE STABILITY OF NANOFLUIDS OF RAW AND IMPREGNATED CARBON NANOTUBES FOR APPLICATION OF HEAT TRANSFER. Masters thesis, King Fahd University of Petroleum and Minerals.

Synthesis of Activated Carbon from Oil Fly Ash (OFA) and its Application for the Acidic Gases (CO2 and H2S) Seperation and Sequestration. PhD thesis, King Fahd University of Petroleum and Minerals.

CO2 Capture, Nutrients Uptake and Lipids Content of Microalgae Species Culturing in Wastewater Media. Masters thesis, King Fahd University of Petroleum and Minerals.

Photocatalytic Degradation of Benzene, Toluene and Xylene in an Aqueous Solution. Masters thesis, King Fahd University of Petroleum and Minerals.

Effect of micro and nano carbon adsorbents doped with metal nanoparticles on the removal of heavy metals from water. Masters thesis, King Fahd University of Petroleum and Minerals.

Isolation and Characterization of Microbial Communities Found in Oil-Polluted Sites from 1991 Gulf War. Masters thesis, King Fahd University of Petroleum and Minerals.

Adsorptive Evaluation of Nanoparticles Loaded Carbon Derived from Used Tires. Masters thesis, King Fahd University of Petroleum and Minerals.

Piezoelectric Material as Energy Generation Devices. Masters thesis, King Fahd University of Petroleum and Minerals.

The role of electrostatic interactions in the prediction of phase equilibrium of DME mixtures using SAFT EoS. Masters thesis, King Fahd University of Petroleum and Minerals.

Modeling of CO2 Capture using Metal Organic Frameworks (MOFs). Masters thesis, King Fahd University of Petroleum and Minerals.

Catalytic Production of Para-Ethyltoluene by Alkylation of mono-Alkylbenzenes with Alcohols. Masters thesis, King Fahd University of Petroleum and Minerals.

Development of Emulsified Gels for Water Control in Oil and Gas Wells. Masters thesis, King Fahd University of Petroleum and Minerals.

Pulsed-Electrokinetic Remediation of Mixed-Heavy Metals Contaminated Soil. Masters thesis, King Fahd University of Petroleum and Minerals.

Synthesis and Characterization of Highly Dispersed Nickel-Based Catalysts for Alkaline Direct Methanol Fuel Cells (DMFCs). Masters thesis, King Fahd University of Petroleum and Minerals.

Performance Analysis of Steam Reforming of Methane in a Hydrogen Permeable Membrane Reactor. Masters thesis, King Fahd University of Petroleum and Minerals.

Synthesis and Characterization of Hierarchical EU-1 Zeolite and its Applications in Converting Dimethyl Ether to Olefins. Masters thesis, King Fahd University of Petroleum and Minerals.

Evaluation of Different Surfactant-Polymer Systems for EOR Applications in High-Temperature High-Salinity Saudi Carbonate Reservoirs. PhD thesis, King Fahd University of Petroleum and Minerals.

Development of an Environmentally-Friendly Drilling Fluid Using Date Seeds and Grass. Masters thesis, King Fahd University of Petroleum and Minerals.

Fluidized-bed ODH of ethane to ethylene optimization modeling and catalyst development. Masters thesis, King Fahd University of Petroleum and Minerals.

Investigation of Diesel Steam Reforming Over Ni Based Catalysts. Masters thesis, King Fahd University of Petroleum and Minerals.

Development of Modified MTW Zeolites for Catalytic Cracking of n-hexane. Masters thesis, King Fahd University of Petroleum and Minerals.

Carbon Dioxide Capture From Natural Gas Using Regenerable Kaolin Based Sorbent. Masters thesis, King Fahd University of Petroleum and Minerals.

Design and Synthesis of Flexible Heat Exchanger Networks with Variable Stream Properties. Masters thesis, King Fahd University of Petroleum and Minerals.

Carbon-di-oxide Capture and Growth Kinetics Study of Two Chlorella Vulgaris and Nannochloropsis Oculata in Batch and Series Photobioreactors. Masters thesis, King Fahd University of Petroleum and Minerals.

Ce Modified Ni and Fe Based Oxygen Carriers for Chemical Looping Combustion. Masters thesis, King Fahd University of Petroleum and Minerals.

Heat Transfer Enhancement of Nanofluids using Raw, Chemically Modified and Impregnated Carbon Nanotubes. Masters thesis, King Fahd University of Petroleum and Minerals.

Silicoaluminophosphate (SAPO-34) Grown on SiC Foams as Structured Catalysts for Methanol to Olefin Reaction. Masters thesis, King Fahd University of Petroleum and Minerals.

Preparation and Characterization of HDPE/Graphene Nano-Composites by In-situ Polymerization. Masters thesis, King Fahd University of Petroleum and Minerals.

A Numerical Modeling Approach for Transformation-Induced Failures. Masters thesis, King Fahd University of Petroleum and Minerals.

Design and Fabrication of Different Textured Surfaces with Improved Hydrophobicity for Photovoltaic Cells Applications. Masters thesis, King Fahd University of Petroleum and Minerals.

Surfactant-Polymer (SP) Flooding for EOR in Carbonate Resorviors. Masters thesis, King Fahd University of Petroleum and Minerals.

Study of Polymer-Surfactant Interactions for Chemical Enhanced Oil Recovery in Carbonate Reservoirs. Masters thesis, King Fahd University of Petroleum and Minerals.

Development of Nano-sized Zeolites for Converting Methanol to Olefins. Masters thesis, King Fahd University of Petroleum and Minerals.

Design and Optimization of Carbon nano-tubes Production and Chemical Vapor Disposition Reactor. Masters thesis, King Fahd University of Petroleum and Minerals.

Computational Fluid Dynamics (CFD) Modeling of Solar Steam Methane Reformer and Design of an Integrated Novel Solar Collector. Masters thesis, King Fahd University of Petroleum and Minerals.

Solid Acid Catalyst for Selective Synthesis of 2-Phenyldodecane. Masters thesis, King Fahd University of Petroleum and Minerals.

Ce/W Oxides modified Mesoporous Carbon supported Pt-Pd catalysts for ormic Acid Fuel Cell: Synthesis, Characterization and Evaluation. Masters thesis, King Fahd University of Petroleum and Minerals.

Development of a New Cost-Effective Polymer Gel for Water Control in Oil and Gas Wells. PhD thesis, King Fahd University of Petroleum and Minerals.

Diethylbenzene Production via Ethylbenzene Disproportionation and Ethylation Reactions over HZSM-5 Catalysts: Effect of Si/Al Ratio. Masters thesis, King Fahd University of Petroleum and Minerals.

Modification of Styrene-Methyl Methacrylate Co-Polymer Using Microwave Radiation in The Presence of Graphene. Masters thesis, King Fahd University of Petroleum and Minerals.

A General Stochastic Model for Refinery Planning Under Uncertainty. Masters thesis, King Fahd University of Petroleum and Minerals.

Improvement of Asphalt Performance Using Industrial Wastes. PhD thesis, King Fahd University of Petroleum and Minerals.

Synthesis and Applications of Linear and Cross-linked pH-Resposnsive Polycarbo-, Polyphospho-and Polysulfobetaines. PhD thesis, King Fahd University of Petroleum and Minerals.

Oxidative Dehydrogenation of n-butane over Chromium and Vanadium Supported Catalysts with CO2 as Mild Oxidant. Masters thesis, King Fahd University of Petroleum and Minerals.

Pressure Drop Reduction of Stable Water-in-Oil Emulsion Flow in Pipes. PhD thesis, King Fahd University of Petroleum and Minerals.

Removal of Phenolic Compounds from Water using Nano and Micro Carbon Materials. Masters thesis, King Fahd University of Petroleum and Minerals.

Catalytic Cracking of VGO to Produce Olefins: Effect of Additives and Kinetics Modeling. Masters thesis, King Fahd University of Petroleum and Minerals.

Metathesis of Butene to produce Propylene over mesoporous Tungsten Oxide Catalyst: Synthesis, Characterization and Kinetic Modeling. Masters thesis, King Fahd University of Petroleum and Minerals.

Synthesis of Supported Metallocene Catalysts and Application to Copolymerization of Ethylene with 4-Methyl-1-Pentene. Masters thesis, King Fahd University of Petroleum and Minerals.

Synthesis and Kinetic Modeling of Ga-containing MFI zeolite of Hierarchical Pore Architecture used for Lower Alkane Aromatization. Masters thesis, King Fahd University of Petroleum and Minerals.

Three Problems in Nonconventional Coordinates Systems (Conduction in a Sphroid, Conduction from a torus, Flow in semielliptic tubes). Masters thesis, King Fahd University of Petroleum and Minerals.

Solid-Liquid Mass Transfer from Spinning Sphere in Non-Newtonian Liquid. Masters thesis, King Fahd University of Petroleum and Minerals.

Controlled Size MTT (ZSM-23) Zeolites For Catalytic Cracking. Masters thesis, King Fahd University of Petroleum and Minerals.

Evaluation of Polymeric Materials as Loss Circulation Agents in Shallow Zones. Masters thesis, King Fahd University of Petroleum and Minerals.

Heat Integration and Retrofitting Analysis of Arabian Light Crude Distillation Units. Masters thesis, King Fahd University of Petroleum and Minerals.

Adsorption of carbon dioxide using treated fly ash. Masters thesis, King Fahd University of Petroleum and Minerals.

Effect of Ceramic Nano Fillers on Polyethylene Properties. Masters thesis, King Fahd University of Petroleum and Minerals.

Feild Deployable Electrochemical Sensors for Simultaneous Determination of Cd, Pb and Zn Heavy Metals in Drinking Water. Masters thesis, King Fahd University of Petroleum and Minerals.

Corrosion Protection of Carbon Steel by Aluminum Oxide Nano Coatings Using Solution Plasma Spray Technique. Masters thesis, King Fahd University of Petroleum and Minerals.

An optimization model for NOx and SOx emissions reduction in power generation. Masters thesis, King Fahd University of Petroleum and Minerals.

Bromated Removal from Water by Using Activated Carbon (AC) and Modified Multi-Walled Carbon Nanotubes (MWCNT). Masters thesis, King Fahd University of Petroleum and Minerals.

Synthesis of Titania Nanoparticles and its Applications for Photocatalytic Degradation of Pollutants from Aqueous Solutions. PhD thesis, King Fahd University of Petroleum and Minerals.

Methylation of Toluene with Methanol over Bi porous acidic and basic zeolite catalysts. Masters thesis, King Fahd University of Petroleum and Minerals.

Fabrication of MFI Zeolite Membrane for RO (Reverse Osmosis) Water Desalination Process. Masters thesis, King Fahd University of Petroleum and Minerals.

Electro Chemical Reduction of Carbon Dioxide to Hydrocarbons. PhD thesis, King Fahd University of Petroleum and Minerals.

Application of Polyelectrolyte Multilayer Reverse Osmosis Membrane in Seawater Desalination. PhD thesis, King Fahd University of Petroleum and Minerals.

Electrochemical reduction of carbon dioxide on oxides of Tim and Nikel. Masters thesis, King Fahd University of Petroleum and Minerals.

Electrochemical Impedance Spectorscopy Using High Order Statistics Deconvolution and Adaptive Filtering Algorithms. Masters thesis, King Fahd University of Petroleum and Minerals.

Synthesis and Characterization of Activated Carbon Prepared From Palm Seeds and Applications for 4- Chlorophenol Removal from Aqueous Solution. Masters thesis, King Fahd University of Petroleum and Minerals.

Planning and optimization for an Oil Refinery with NOx Reduction. Masters thesis, King Fahd University of Petroleum and Minerals.

Effects of functionalized carbon nanotubes with surfactants on the mechanical and thermal properties of High Density Polyethylene (HDPE)nanocomposites. Masters thesis, King Fahd University of Petroleum and Minerals.

Development of Multi-Layered Gradient Ceramic Membrane. Masters thesis, King Fahd University of Petroleum and Minerals.

Polymerization of Ethylene using Metallocene and Zeigler Natta catalyst with doped-Nanotitania. Masters thesis, King Fahd University of Petroleum and Minerals.

Transport Properties of Gases in Polyethylene/Nanoclay Composites. Masters thesis, King Fahd University of Petroleum and Minerals.

A Study of Amidoamines as Inhibitors for Mild Steel Corrosion in Saline Media Saturated with Carbon dioxide. Masters thesis, King Fahd University of Petroleum and Minerals.

Ethylbenzene Dehydrogenation to Styrene over Mesoporous Catalysts: Synthesis and Kinetic Modeling. Masters thesis, King Fahd University of Petroleum and Minerals.

Production of Carbon Nanotubes (CNTs) using Floating Catalyst Chemical Vapor Deposition (FC-CVD) Reactor for Microbiological Applications. Masters thesis, King Fahd University of Petroleum and Minerals.

Laboratory Evaluation of Viscoelastic Surfacant Acid Diversion in Porous Media. Masters thesis, King Fahd University of Petroleum and Minerals.

Design, Synthesis and Testing of Nanofilteration Membranes for Water Desalination Using LBL Methods. PhD thesis, King Fahd University of Petroleum and Minerals.

Hydrodesulphurization of Model Compounds Using Modified CoMo and NiMo Catalyst. Masters thesis, King Fahd University of Petroleum and Minerals.

Experimental Investigation of Heat Transfer Characterization for CNT- Nanofluid in Heat Exchangers. Masters thesis, King Fahd University of Petroleum and Minerals.

(2011) Propylene by Oxidative Dehydrogenation of Propane over Mixed Metal Oxide Catalyst. Masters thesis, King Fahd University of Petroleum and Minerals.

(2010) Characterization of Polyethylene/Fly Ash Composite and Surface Modification of Fly Ash on Composite Properties. Masters thesis, King Fahd University of Petroleum and Minerals.

(2010) Effect of Surfaces Modification of Carbon Nanotubes (CNT) on the Mechanical and Thermal Properties of CNT/Polypropylene Nanocompsites. Masters thesis, King Fahd University of Petroleum and Minerals.

(2010) Batch and Kinetic Study of Different Corrosion Inhibitors for 1018 Carbon Steel in Seawater. Masters thesis, King Fahd University of Petroleum and Minerals.

(2010) Development and Investigation of Environmentally Degradable Plastic Bags in Saudi Arabia. PhD thesis, King Fahd University of Petroleum and Minerals.

(2010) Ethylation of Benzene with Ethano over Different Zeolite Catalysts. Masters thesis, King Fahd University of Petroleum and Minerals.

(2009) REMOVAL OF LEAD & CHROMIUM FROM WATER BY USING MODIFIED & NONMODIFIED CARBON NANOTUBES. Masters thesis, King Fahd University of Petroleum and Minerals.

(2009) Dynamic Monte Carlo Simulation of Atom Transfer Radical Copolymerization. Masters thesis, King Fahd University of Petroleum and Minerals.

(2005) Development and application of linear state estimators in control of reactive distillation. Masters thesis, King Fahd University of Petroleum and Minerals.

(2004) Numerical analysis of entropy generation in laminar viscous fluid flow between parallel plates. Masters thesis, King Fahd University of Petroleum and Minerals.