Thesis

MODELING GEOCHEMICAL AND GEOMECHANICAL EFFECTS OF CO2 REACTIVE TRANSPORT IN DEEP SALINE LIMESTONE AQUIFER. Masters thesis, King Fahd University of Petroleum and Minerals.

The impact of CO2 storage on the rock integrity. Masters thesis, King Fahd University of Petroleum and Minerals.

HYDROGEN STORAGE IN DEPLETED GAS RESERVOIRS. PhD thesis, King Fahd University of Petroleum and Minerals.

Biodegradation of Specific Polycyclic Aromatic Hydrocarbons (PAHs) by Novel Bacterial Strains Isolated from Saudi Arabian Sediments. Masters thesis, King Fahd University of Petroleum and Minerals.

SYSTEMATIC INVESTIGATION OF ROCK/FLUID INTERACTIONS IN RESERVOIRS AT NANO –TO – MILLIMETER SCALE: IMPLICATIONS FOR ENHANCED OIL RECOVERY AND CO2 STORAGE. PhD thesis, King Fahd University of Petroleum and Minerals.

IMPROVED LIQUID-LIQUID EJECTOR PERFORMANCE FOR EMULSION GENERATION APPLICATION. Masters thesis, King Fahd University of Petroleum and Minerals.

Influence of bivalent cations on interfacial active components of crude oil emulsions. Masters thesis, King Fahd University of Petroleum and Minerals.

Multivariate Time Series Prediction of Drilling Rate and Hazards. Masters thesis, King Fahd University of Petroleum and Minerals.

Experimental Evaluation of Oil Recovery from Carbonate Rocks by Gemini Surfactants. PhD thesis, King Fahd University of Petroleum and Minerals.

THE EFFECTS OF ORGANIC ACID ON WATER-GAS CAPILLARY PRESSURE: IMPLICATIONS FOR UNDERGROUND GAS STORAGE. Masters thesis, King Fahd University of Petroleum and Minerals.

Predicting Rate of Penetration (ROP) for Horizontal Wells in Unconventional Reservoirs Using Artificial Intelligence. Masters thesis, King Fahd University of Petroleum and Minerals.

Hydrogen Separation with a Pd-Pt Membrane. Masters thesis, King Fahd University of Petroleum and Minerals.

Sustaining Hydraulic Conductivity in Soft/Acid Damaged Carbonate Fractures: Chemical Treatment for Enhanced Performance. PhD thesis, King Fahd University of Petroleum and Minerals.

FRACTURE CLEANUP USING THERMOCHEMICHAL FLUIDS (TCFs). PhD thesis, King Fahd University of Petroleum and Minerals.

Spontaneous Imbibition of Acidic Fluids in Sandstones and Carbonates: A Core- and Micro-Scale Perspective. Masters thesis, King Fahd University of Petroleum and Minerals.

Evaluation of New Flowback Formulation for Hydraulically Fractured Tight Gas Wells. Masters thesis, King Fahd University of Petroleum and Minerals.

Improved CO2 Flooding for Enhanced Heavy Oil Recovery. Masters thesis, King Fahd University of Petroleum and Minerals.

EVALUATING THE MICROSCOPIC RECOVERY POTENTIAL OF LOW SALINITY VISCOELASTIC POLYMER FLOOD IN OIL-WET CARBONATE FORMATION. Masters thesis, King Fahd University of Petroleum and Minerals.

Real Time Wellbore Cleaning Evaluation and Advisory System. PhD thesis, King Fahd University of Petroleum and Minerals.

COATING AND LINER FOR HYDROGEN AND NATURAL GAS (H2-NG) BLENDED GAS NETWORK. Masters thesis, King Fahd University of Petroleum and Minerals.

DRAG REDUCTION OF EMULSIFIED ACID SYSTEM IN PIPES. PhD thesis, King Fahd University of Petroleum and Minerals.

Investigation of the Rheology, Filtration Loss, and H2S Scavenging Performance of Zeolitic-Imidazole Framework-67 (ZIF-67) and Layered Metal Hydroxide (LTH) Nanomaterials for Oilfield Drilling Applications. Masters thesis, King Fahd University of Petroleum and Minerals.

INVESTIGATION OF MODIFIED ENZYME-INDUCED CARBONATE PRECIPITATION FOR SAND PRODUCTION CONTROL APPLICATIONS. Masters thesis, King Fahd University of Petroleum and Minerals.

THE USE OF INTEGRATED GEOPHYSICAL METHODS TO CHARACTERIZE THE SHALLOW INHOMOGENEITY ON DAMMAM DOME, SAUDI ARABIA. Masters thesis, King Fahd University of Petroleum and Minerals.

GAS-LIQUID FLOW VOID FRACTION PHASE PATTERN IDENTIFICATION USING SLIPPAGE NUMBER. Masters thesis, King Fahd University of Petroleum and Minerals.

OPTIMIZATION OF WELL PLACEMENT AND PATH IN HYDROCARBON RESERVOIRS. Masters thesis, King Fahd University of Petroleum and Minerals.

Optimizing Horizontal Well Length to Mitigate Injectivity Loss During Viscoelastic Polymer Flooding. Masters thesis, King Fahd University of Petroleum and Minerals.

Effect of Live-Crude-Oil, GOR, and HPHT on Optimal Salinity of EOR Surfactant Formulation. Masters thesis, King Fahd University of Petroleum and Minerals.

Iron Sulfide Scales Quantification Using Spectral Induced Polarization. Masters thesis, King Fahd University of Petroleum and Minerals.

MULTISCALE ADSORPTION AND DIFFUSION STUDIES IN UNCONVENTIONAL SHALE GAS RESERVOIRS. PhD thesis, King Fahd University of Petroleum and Minerals.

Preparation of functionalized nanoparticles and Their Use in Corrosion Treatment. Masters thesis, King Fahd University of Petroleum and Minerals.

PREDICTION OF WATER SATURATION FROM WELL LOGS USING ARTIFICIAL INTELLIGENCE TECHNIQUES. Masters thesis, King Fahd University of Petroleum and Minerals.

Analysis of Syn- and Post-Depositional Controls on Facies Distribution, Depositional Architecture and Reservoir Quality Modifications of Early Syn-rift Continental Deposits (Early Oligocene – Early Miocene), NW Saudi Arabia. PhD thesis, King Fahd University of Petroleum and Minerals.

FIRST ARRIVALS TRAVELTIME PICKING USING UNSUPERVISED MACHINE LEARNING (DBSCAN) AND SUPER-VIRTUAL REFRACTION INTERFEROMETRY TECHNIQUE. Masters thesis, King Fahd University of Petroleum and Minerals.

Numerical Investigation of Rock and Acid Properties Impacting Matrix Acidizing Efficiency. Masters thesis, King Fahd University of Petroleum and Minerals.

Efficient 3D Wormhole Modeling Utilizing a Fully Coupled Reactive Transport Model. Masters thesis, King Fahd University of Petroleum and Minerals.

Sedimentology, Stratigraphy, and Reservoir Characterization of the Upper Jurassic Hanifa Formation, Central Saudi Arabia. PhD thesis, King Fahd University of Petroleum and Minerals.

Evaluating Factors Controlling Sonic Velocity in Carbonate Factories. PhD thesis, King Fahd University of Petroleum and Minerals.

DATA MINING APPLICATIONS OF NMR DATA FOR PETROPHYSICAL DATA PREDICTION. Masters thesis, King Fahd University of Petroleum and Minerals.

Prediction of Well Production Rates For Multiphase Flow Using Machine Learning Techniques. Masters thesis, King Fahd University of Petroleum and Minerals.

IMPROVING DRILLING PERFORMANCE IN ABRASIVE SANDSTONE FORMATION BY OPTIMIZING DRILL STRING AND BHA DESIGN. Masters thesis, King Fahd University of Petroleum and Minerals.

Development of Functionalized Graphene Oxide Based Corrosion Inhibitors for Oil Field Applications. PhD thesis, King Fahd University of Petroleum and Minerals.

Development of Functionalized Graphene Oxide Based Corrosion Inhibitors for Oil Field Applications. PhD thesis, King Fahd University of Petroleum and Minerals.

Multi-Mesh Modelling and Applications to Two-Phase Flow and Chemical Flooding Problems. PhD thesis, King Fahd University of Petroleum and Minerals.

APPLICATION OF IONIC LIQUIDS IN CLAY SWELLING REDUCTION: MECHANISM AND PERFORMANCE. PhD thesis, King Fahd University of Petroleum and Minerals.

Consortia of Microalgae & Bacteria for the Degradation of Polycyclic Aromatic Hydrocarbons (PAHs). Masters thesis, King Fahd University of Petroleum and Minerals.

THE EFFECT OF DRILLING FLUID TYPE AND EXPOSURE TIME ON GEOMECHANICAL PROPERTIES OF SANDSTONE FORMATIONS. PhD thesis, King Fahd University of Petroleum and Minerals.

IMPROVING WEAK CARBONATE ROCKS’ HARDNESS THROUGH CHEMICAL ADDITIVES: APPLICATION TO HYDRAULIC FRACTURING. Masters thesis, King Fahd University of Petroleum and Minerals.

Wireline Based Rock Physics Modeling and Synthetic Seismic. Masters thesis, King Fahd University of Petroleum and Minerals.

ASSESSMENT OF RESERVOIR QUALITY OF SOURCE ROCK. PhD thesis, King Fahd University of Petroleum and Minerals.

Iron Sulfide Scale Inhibition in Water Injection Wells. Masters thesis, King Fahd University of Petroleum and Minerals.

STUDY OF MECHANICAL PROPERTIES OF KEROGEN BY A MOLECULAR SIMULATION APPROACH. Masters thesis, King Fahd University of Petroleum and Minerals.

Machine Learning Techniques for Geophysical Data. Masters thesis, King Fahd University of Petroleum and Minerals.

Interaction between modern dune and interdune deposits in North of Al Jafurah Sand Sea and their significance to Reservoir Heterogeneity and Architecture, Eastern Saudi Arabia. Masters thesis, King Fahd University of Petroleum and Minerals.

Atomistic Simulation of Hydroxyethyl Cellulose (HEC) for Enhanced Oil recovery applications. Masters thesis, King Fahd University of Petroleum and Minerals.

EVALUATION OF FOAM SUPER-CRITICAL CO2 INJECTION IN THE COMPOSITE LIMESTONE CORE USING NEW MULTIPLE FRACTURE SYSTEM. Masters thesis, King Fahd University of Petroleum and Minerals.

TOWARDS WATER SUSTAINABILITY: UTILIZING OILFIELD PRODUCED WATER IN FORMULATING OIL AND GAS STIMULATION FLUIDS THROUGH INCORPORATION OF CHELATING AGENTS. Masters thesis, King Fahd University of Petroleum and Minerals.

AN EXPERIMENTAL INVESTIGATION AND FINITE ELEMENT MODELING OF PULSE FRACTURING. PhD thesis, King Fahd University of Petroleum and Minerals.

Development of Oil-Well Cement Formulations for CO2-Rich Environment Relevant to Geologic Carbon Sequestration. PhD thesis, King Fahd University of Petroleum and Minerals.

ROLE OF ROCK MINERALOGY AND OIL COMPOSITION IN WETTABILITY ALTERATION OF CARBONATE RESERVOIRS BY SUBCRITICAL CARBON DIOXIDE. PhD thesis, King Fahd University of Petroleum and Minerals.

REAL-TIME ESTIMATION OF LOST CIRCULATION RATE WHILE DRILLING USING ARTIFICIAL INTELLIGENCE TECHNIQUES. Masters thesis, King Fahd University of Petroleum and Minerals.

Oil Flow Rate Estimation for High GOR Producers Using Artificial Intelligence Techniques. Masters thesis, King Fahd University of Petroleum and Minerals.

PASSIVE SEISMIC EVENT DETECTION IN THE GRONINGEN AREA USING DEEP LEARNING. Masters thesis, King Fahd University of Petroleum and Minerals.

FUNCTIONALIZED POLYMER-BASED MATERIALS AS SCALE AND CORROSION INHIBITORS. Masters thesis, King Fahd University of Petroleum and Minerals.

Sand Consolidation by Catalyzed Low-Temperature Oxidation. Masters thesis, King Fahd University of Petroleum and Minerals.

IMPROVING HYDROCARBON SATURATION ASSESSMENT IN LOW RESISTIVITY BEDS USING HIGH-RESOLUTION IMAGE LOGS AND CORE MEASUREMENTS. Masters thesis, King Fahd University of Petroleum and Minerals.

MITIGATION OF CO2 GRAVITY OVERRIDE BY SOLVENT BLENDING. Masters thesis, King Fahd University of Petroleum and Minerals.

DEVELOPMENT OF CHEMOSTRATIGRAPHY AND CHEMO-MECHANICAL FACIES FRAMEWORK IN KHUFF, UNAYZAH AND QUSAIBA FORMATIONS, KSA. PhD thesis, King Fahd University of Petroleum and Minerals.

POLYSULFONE MIXED MATRIX MEMBRANES CONTAINING ZIF-95 AS FILLER FOR GAS SEPARATION APPLICATIONS. Masters thesis, King Fahd University of Petroleum and Minerals.

SOURCE-ROCK CHARACTERIZATION OF LATE JURASSIC (EARLY KIMMERIDGIAN) CARBONATE MUDROCKS OF THE JAFURAH SUB-BASIN, EASTERN SAUDI ARABIA. Masters thesis, King Fahd University of Petroleum and Minerals.

IN-LINE GENERATION OF OIL-IN-WATER AND WATER-INOIL EMULSIONS. Masters thesis, King Fahd University of Petroleum and Minerals.

NOVEL ASSESSMENT OF WALL THINNING IN STAINLESS STEEL ELBOW USING ELECTRIC FIELD MAPPING (EFM) SYSTEM. Masters thesis, King Fahd University of Petroleum and Minerals.

Investigation of Condensate Removal in Tight Reservoirs Using Thermochemical Fluids. PhD thesis, King Fahd University of Petroleum and Minerals.

Characterization of Fluid Drainage Mechanism at Core and Pore Scales. Masters thesis, King Fahd University of Petroleum and Minerals.

Rate of Penetration Optimization for Multiple Well Profiles Using Artificial Intelligence Techniques. PhD thesis, King Fahd University of Petroleum and Minerals.

LOCATING IDEAL CO2 SEQUESTRATION SITES: AN INTEGRATED ENVIRONMENTAL-BIG DATA ANALYTICS APPROACH. Masters thesis, King Fahd University of Petroleum and Minerals.

SIGNAL COMPRESSION FOR WIRELESS GEOPHONE NETWORKS IN SEISMIC ACQUISITION. PhD thesis, King Fahd University of Petroleum and Minerals.

IN-SITU GENERATED NITROGEN GAS BY THERMOCHEMICAL REACTION FOR ACID DIVERSION. Masters thesis, King Fahd University of Petroleum and Minerals.

Analysis of Water/Oil Ratio in Complex Carbonate Reservoirs under Water-Flood. Masters thesis, King Fahd University of Petroleum and Minerals.

ENHANCEMENT AND PREDICTION OF LONG-TERM ACID FRACTURE CONDUCTIVITY. Masters thesis, King Fahd University of Petroleum and Minerals.

Resistance of Chromium Manganese Stainless Steel to Pitting Corrosion Exposed To Harsh Environment. Masters thesis, King Fahd University of Petroleum and Minerals.

SIMULATION OF GAS FLOW, SAND TRANSPORT AND WELLBORE EROSION IN HORIZONTAL WELLS. Masters thesis, King Fahd University of Petroleum and Minerals.

DEVELOPMENT OF A POLYMER FOR GREEN ENHANCED OIL RECOVERY. Masters thesis, King Fahd University of Petroleum and Minerals.

Modified Mesoporous Supported Ni(Co)Mo-S For Hydrodesulfurization Applications. PhD thesis, King Fahd University of Petroleum and Minerals.

(2018) Role of Fracturing Fluid on the Breakdown Pressure of Tight Sandstone Rocks. Masters thesis, King Fahd University of Petroleum and Minerals.

Direct Numerical Simulation of 3D Sparse Multiscale Grid Generated Turbulence and Kinematic Simulation of Inertial Particle Pair Diffusion. PhD thesis, King Fahd University of Petroleum and Minerals.

WELLBORE INSTABILITY ANALYSIS FROM A HIGHLY FRACTURED CARBONATE GAS RESERVOIRS. Masters thesis, King Fahd University of Petroleum and Minerals.

A study on the effect of THMC conditions on scratch test measurements. Masters thesis, King Fahd University of Petroleum and Minerals.

HORIZONTAL & MULTILATERAL WELLS' PERFORMANCE PREDICTION IN UNDERSATURATED RESERVOIRS. Masters thesis, King Fahd University of Petroleum and Minerals.

ESTIMATION OF HOLE CLEANING CONDITION IN REAL-TIME WHILE DRILLING (OPERATIONAL POINT OF VIEW). Masters thesis, King Fahd University of Petroleum and Minerals.

THERMAL AND CATALYTIC CRACKING OF ARABIAN LIGHT CRUDE OIL TO LIGHT OLEFINS. Masters thesis, King Fahd University of Petroleum and Minerals.

TWO-LEVEL GALERKIN MIXED FINITE ELEMENT METHOD FOR GENERALIZED DARCY-FORCHHEIMER PROBLEMS. PhD thesis, King Fahd University of Petroleum and Minerals.

Reservoir and Completion Parametric Study on a Shale Gas Reservoir. Masters thesis, King Fahd University of Petroleum and Minerals.

Transient Wellbore Pressurization Correlation & HIPPS Response Time in Multiphase Flow. Masters thesis, King Fahd University of Petroleum and Minerals.

ENHANCING WATER BASED DRILLING FLUID PERFORMANCE USING POLYMERS AND NANOPARTICLES. Masters thesis, King Fahd University of Petroleum and Minerals.

REDUCING BARITE SAGGING BY USING COPOLYMER IN HIGH PRESSURE HIGH TEMPERATURE WELLS. Masters thesis, King Fahd University of Petroleum and Minerals.

A FRAMEWORK FOR SINGLE AND MULTIPLE ANOMALIES LOCALIZATION IN PIPELINES. Masters thesis, King Fahd University of Petroleum and Minerals.

Synthesis and characterization of functionalized super-paramagnetic nanomaterials as imaging agents for crude oil-bearing formation. PhD thesis, King Fahd University of Petroleum and Minerals.

TWO-PHASE ANNULAR FLOW IN VERTICAL PIPES. Masters thesis, King Fahd University of Petroleum and Minerals.

SYNTHESIS AND CHARACTERISATION OF SILICALITE-1 SUPPORTED NICKEL-BASED CATALYSTS FOR CO2 REFORMING OF METHANE. Masters thesis, King Fahd University of Petroleum and Minerals.

Prediction of Capillary Pressure for Arabian Oil Carbonate Reservoirs using Artificial Intelligence. Masters thesis, King Fahd University of Petroleum and Minerals.

Synthesis and characterization of cost-effective Chabazite (CHA) zeolite catalysts for the conversion of methanol to olefins (MTO) process. Masters thesis, King Fahd University of Petroleum and Minerals.

An Empirical Correlation of Permeability for the Khuff formation. Masters thesis, King Fahd University of Petroleum and Minerals.

CARBONATE SURFACE CHEMISTRY: EFFECT OF MONOVALENT IONS. Masters thesis, King Fahd University of Petroleum and Minerals.

Evaluation of Nano Zeolite as an Additive for Oil-Well Cementing. Masters thesis, King Fahd University of Petroleum and Minerals.

Carbon-based Nanomaterials for Adsorptive Desulfurization of Selected Sulfur Compounds from Liquid Fuels. Masters thesis, King Fahd University of Petroleum and Minerals.

Maximizing Light Olefins Yield from the fluid catalytic cracking of whole crude oil. Masters thesis, King Fahd University of Petroleum and Minerals.

CHARACTERIZATION OF THE CARBONATE MUD ROCKS OF THE MIDDLE JURASSIC TUWAIQ MOUNTAIN FORMATION, JAFURAH SUB-BASIN, SAUDI ARABIA; IMPLICATION FOR UNCONVENTIONAL RESERVOIR QUALITY PREDICTION. PhD thesis, King Fahd University of Petroleum and Minerals.

ESTIMATION OF ACOUSTIC VELOCITIES AND ROCK MECHANICAL PARAMETERS USING ARTIFICIAL INTELLIGENCE TOOLS. Masters thesis, King Fahd University of Petroleum and Minerals.

Interfacial Tension and Contact Angle Measurements of CO2/Brines/Surfactants/Oil Systems with Dolomite Rock. Masters thesis, King Fahd University of Petroleum and Minerals.

A NUMERICAL STUDY OF SHALE GAS FLOW IN TIGHT POROUS MEDIA THROUGH NONLINEAR TRANSPORT MODELS. PhD thesis, King Fahd University of Petroleum and Minerals.

Stability and Texture of CO2/N2 Foam in Sandstone. Masters thesis, King Fahd University of Petroleum and Minerals.

Sandstone Acidizing Using Chelating Agents. Masters thesis, King Fahd University of Petroleum and Minerals.

Study of Cross-linked Polymer Gel Systems for potential use as Loss Prevention Agents. Masters thesis, King Fahd University of Petroleum and Minerals.

Optimization of In-Situ Generated CO2 Using Chelating Agents for EOR from Carbonate Reservoirs. Masters thesis, King Fahd University of Petroleum and Minerals.

OIL WELL CEMENT WITH CARBON NANOTUBE FOR HIGH PRESSURE HIGH TEMPERATURE APPLICATIONS. Masters thesis, King Fahd University of Petroleum and Minerals.

OPTIMIZATION OF SAGD AND VAPEX PROCESSES WITH MINIMUM WELL SPACING CONSTRAINTS. Masters thesis, King Fahd University of Petroleum and Minerals.

SEQUENCE STRATIGRAPHIC ANALYSIS AND POROSITY EVALUATION OF A FIELD USING 3D SEISMIC AND WELL LOGS: ANnEXAMPLE FROM THE NIGER DELTA, NIGERIA. Masters thesis, King Fahd University of Petroleum and Minerals.

EFFECT OF CRUDE OIL COMPOSITION ON WETTABILITY ALTERATION DURING IMMISCIBLE CO2 FLOODING. Masters thesis, King Fahd University of Petroleum and Minerals.

Performance of Saudi Bentonite and Nano clay Admixed Cement for HPHT Conditions. Masters thesis, King Fahd University of Petroleum and Minerals.

Influence of Surfactants on the Stability of Nanofluids of Raw and Impregnated Carbon Nanotubes for Application of Heat Transfer. Masters thesis, King Fahd University of Petroleum and Minerals.

A Global Optimization Approach to the Gradual Deformation Method of History Matching. Masters thesis, King Fahd University of Petroleum and Minerals.

The Effect of Clay Content and Type on Oil Recovery from Sandstone Cores Using High pH Chelating Agents. Masters thesis, King Fahd University of Petroleum and Minerals.

TOXIC GAS LEAKAGE DETECTION SYSTEM USING INDUSTRIAL SENSORS AND WIRELESS SENSOR NETWORK. Masters thesis, King Fahd University of Petroleum and Minerals.

DRAG REDUCTION BY POLYMERS IN TWO-PHASE FLOW IN A SMALL PIPE DIAMETER. Masters thesis, King Fahd University of Petroleum and Minerals.

Efficient Approach for Processing of Hexagonally Sampled Exploration Seismic Data using Spiral Architecture. Masters thesis, King Fahd University of Petroleum and Minerals.

An Artificial Intelligence Approach in Predicting Water Saturation in Carbonate Reservoirs. Masters thesis, King Fahd University of Petroleum and Minerals.

An Experimental study of the effects of CO2 sequestration on electrical properties of carbonate rocks. PhD thesis, King Fahd University of Petroleum and Minerals.

Reaction Kinetics of Fresh & Spent Acid in Dolomite Rock at High Pressures. Masters thesis, King Fahd University of Petroleum and Minerals.

DEVELOPMENT OF AN ENVIRONMENTALLY-FRIENDLY DRILLING FLUID USING DATE SEEDS AND GRASS. Masters thesis, King Fahd University of Petroleum and Minerals.

Evaluation of Novel Viscoelastic System as a Potential Chemical EOR method in Carbonate Reservoirs. Masters thesis, King Fahd University of Petroleum and Minerals.

A PARETO FRONTIER WELL PLACEMENT AND RATE OPTIMIZATION. Masters thesis, King Fahd University of Petroleum and Minerals.

A Numerical Modeling Approach for Transformation-Induced Failures. Masters thesis, King Fahd University of Petroleum and Minerals.

Sedimentological Heterogeneity of the Late Ordovician Glacio-Fluvial Sarah Formation, Al-Qaseem Area, Saudi Arabia: Impact on Petrophysical Properties and Reservoir Quality. Masters thesis, King Fahd University of Petroleum and Minerals.

STUDY OF POLYMER-SURFACTANT INTERACTIONS FOR CHEMICAL ENHANCED OIL RECOVERY IN CARBONATE RESERVOIRS. Masters thesis, King Fahd University of Petroleum and Minerals.

SEDIMENTOLOGICAL AND PETROPHYSICAL CHARACTERIZATION OF SARAH FORMATION WITH THE AID OF GIS, CENTRAL SAUDI ARABIA. Masters thesis, King Fahd University of Petroleum and Minerals.

DEVELPMENT OF A NEW COST-EFFECTIVE POLYMER GEL FOR WATER CONTROL IN OIL AND GAS WELLS. PhD thesis, King Fahd University of Petroleum and Minerals.

EFFECT OF NANO CLAY ON OIL WELL CEMENT PROPERTIES FOR HIGH PRESSURE AND TEMPERATURE APPLICATIONS. Masters thesis, King Fahd University of Petroleum and Minerals.

MODELING WETTABILITY ALTERATION DURING IMMISCIBLE CARBON DIOXIDE FLOODING PROCESS. PhD thesis, King Fahd University of Petroleum and Minerals.

OPTIMIZATION OF DRILLING PARAMETERS USING SPECIFIC ENERGY IN REAL TIME. PhD thesis, King Fahd University of Petroleum and Minerals.

A NEW EOR METHOD FOR SANDSTONE RESERVOIRS USING HIGH PH CHELATING AGENTS. Masters thesis, King Fahd University of Petroleum and Minerals.

CHARACTERIZATION OF OIL WATER FLOW IN HORIZANATAL PIPES. Masters thesis, King Fahd University of Petroleum and Minerals.

Effect of Natural Fractures on the Pressure Transient Behavior of Multilayered Reservoir. Masters thesis, King Fahd University of Petroleum and Minerals.

Investigation of Wormhole Penetration in Carbonate Rocks under High Pressure. Masters thesis, King Fahd University of Petroleum and Minerals.

SEISMIC ATTRIBUTES AND ADVANCED COMPUTER ALGORITHM TO PREDICT FORMATION PORE PRESSURE: QALIBAH FORMATION OF NORTHWEST SAUDI ARABIA. Masters thesis, King Fahd University of Petroleum and Minerals.

ASSESSMENT OF UNCERTAINTY IN POROSITY MEASUREMENTS USING NMR AND CONVENTIONAL LOGGING TOOLS IN CARBONATE RESERVOIRS. Masters thesis, King Fahd University of Petroleum and Minerals.

Effect of Saturation on Acoustic of Carbonate Rock. Masters thesis, King Fahd University of Petroleum and Minerals.

EVALUATION OF POLYMERIC MATERIALS AS LOSS CIRCULATION AGENTS IN SHALLOW ZONES. Masters thesis, King Fahd University of Petroleum and Minerals.

Adsorption of Carbon Dioxide Using Chemically Treated Fly Ash. Masters thesis, King Fahd University of Petroleum and Minerals.

Groundwater Management Approach at KFUPM Campus Using Numerical Simulation. Masters thesis, King Fahd University of Petroleum and Minerals.

Estimating Deliverability in Multi-Layered Gas Reservoirs Using Artificial Intelligence. Masters thesis, King Fahd University of Petroleum and Minerals.

PRESSURE TRANSIENT ANALYSIS OF DATA FROM PERMANENT DOWNHOLE GAUGES. Masters thesis, King Fahd University of Petroleum and Minerals.

PREDICTION OF PRESSURE DROP FOR TWO-PHASE FLOW IN VERTICAL PIPES USING ARTIFICIAL INTELLIGENCE. Masters thesis, King Fahd University of Petroleum and Minerals.

DEVELOPMENT OF AN ENVIRONMENT-FRIENDLY OIL-BASED MUD USING CANOLA OIL. Masters thesis, King Fahd University of Petroleum and Minerals.

DRILLING RIG SCHEDULE OPTIMIZATION. Masters thesis, King Fahd University of Petroleum and Minerals.

Laboratory Evaluation of Acid Diversion by Viscoelastic Surfactant in Carbonate Reservoirs. Masters thesis, King Fahd University of Petroleum and Minerals.

Abdulla F. AL-Dossary (2011) INVESTIGATION OF POOR CEMENTING BEHIND OIL WELL CASING BETWEEN ARAB-C AND D FORMATIONS IN UTHMANYIA. Masters thesis, King Fahd University of Petroleum and Minerals.

Evaluation of Drilling Designs for Smart MRC Wells Applied in Saudi Aramco. Masters thesis, King Fahd University of Petroleum and Minerals.

(2011) Field Production Facility Optimization Using Sequential Quadratic Programming. Masters thesis, King Fahd University of Petroleum and Minerals.

(2009) DETERMINATION OF MATRIX AND FRACTURE PERMEABILITIES IN WHOLE CORES USING PRESSURE PULSE DECAY. Masters thesis, King Fahd University of Petroleum and Minerals.

(2010) Effect of Co32-, Hco3-, and So42- On the Degradation of Phenol in Electrochemical Oxidation Process. Masters thesis, King Fahd University of Petroleum and Minerals.

(2009) ANALYSIS OF ARCHIE’S PARAMETERS DETERMINATION TECHNIQUES. Masters thesis, King Fahd University of Petroleum and Minerals.

(2009) Application of Neural Network for Two Phase Flow Through Chokes. Masters thesis, King Fahd University of Petroleum and Minerals.

(2009) ANALYSIS OF ARCHIE’S PARAMETERS DETERMINATION TECHNIQUES. Masters thesis, King Fahd University of Petroleum and Minerals.

(2005) Development and testing of an artificial neural network model for predicting bottomhole pressure in vertical multiphase flow. Masters thesis, King Fahd University of Petroleum and Minerals.

(2006) Comparison of recent and miocene foraminifera from Eastern Saudi Arabia. Masters thesis, King Fahd University of Petroleum and Minerals.

(1993) Comparative study of computational methods for the solution of the two-dimensional reservoir flow equations. Masters thesis, King Fahd University of Petroleum and Minerals.

(1992) A New correlation for two-phase flow through chokes. Masters thesis, King Fahd University of Petroleum and Minerals.

(1997) Development of multiphase flow metering set-up utilizing coriolis meters. Masters thesis, King Fahd University of Petroleum and Minerals.

(2001) Application of neural network to the determination of well-test interpretation model for horizontal wells. Masters thesis, King Fahd University of Petroleum and Minerals.

(2001) Compositional gradient calculations for a Saudi Arabian gas condensate reservoir. Masters thesis, King Fahd University of Petroleum and Minerals.

(1994) Corrosivity of water-base drilling fluids in deep, hot wells. Masters thesis, King Fahd University of Petroleum and Minerals.

(1992) Surface charge behavior and adsorption of surfactants on carbonate rocks. Masters thesis, King Fahd University of Petroleum and Minerals.

(1992) Factors affecting pseudo relative permeability curves. Masters thesis, King Fahd University of Petroleum and Minerals.

(1995) An experimental study of oil recovery from tarmat reservoirs using hot water and solvent flooding. PhD thesis, King Fahd University of Petroleum and Minerals.

(1997) The Effect of retarder on gelation time and stability of polyacrylamide chromium (III) gel system. Masters thesis, King Fahd University of Petroleum and Minerals.

(1989) Evaluation of vertical multiphase flow correlations for Saudi Arabian field conditions. Masters thesis, King Fahd University of Petroleum and Minerals.

(1994) Analysis of the factors affecting the gelation time for polyacrylamide-redox system. Masters thesis, King Fahd University of Petroleum and Minerals.

(1990) The Effect of injected water salinity on oil recovery. Masters thesis, King Fahd University of Petroleum and Minerals.

(1999) Improving standstone matrix stimulation for oil wells by gas preconditioning. Masters thesis, King Fahd University of Petroleum and Minerals.

(2001) Effect of drilling fluid particle sizes on formation damage: application to horizontal well. Masters thesis, King Fahd University of Petroleum and Minerals.

(1990) The Effect of multiple fractures on the performance of gas wells. Masters thesis, King Fahd University of Petroleum and Minerals.

(1996) Evaluation of empirically derived PVT properties for oil field brines. Masters thesis, King Fahd University of Petroleum and Minerals.

(2000) Incorporating the effects of gas slippage and non-darcy flow in the measurement of permeability using pressure pulse decay technique. Masters thesis, King Fahd University of Petroleum and Minerals.

(1998) Investigation of horizontal well performance using Hele-Shaw model. Masters thesis, King Fahd University of Petroleum and Minerals.

(1995) Evaluation of correlations for natural gas compressibility factors. Masters thesis, King Fahd University of Petroleum and Minerals.

(1993) Investigation of the production performance of horizontal wells in fractured bottom water drive reservoirs. PhD thesis, King Fahd University of Petroleum and Minerals.

(1995) Experimental investigation of various physical factors affecting the stability of water-in-oil emulsions in oil production. Masters thesis, King Fahd University of Petroleum and Minerals.

(1990) Oil compressibility correlations. Masters thesis, King Fahd University of Petroleum and Minerals.

(1999) Spontaneous ignition characteristics of a super-light oil. Masters thesis, King Fahd University of Petroleum and Minerals.

(1995) Recovery performance and relative permeabilities of composite cores. Masters thesis, King Fahd University of Petroleum and Minerals.

(2001) A New dewpoint pressure correlation for gas-condensate systems. Masters thesis, King Fahd University of Petroleum and Minerals.

(1999) Effect of formation damage on horizontal well performance. Masters thesis, King Fahd University of Petroleum and Minerals.

(2000) Effect of a hydraulic fracture on the performance of a layered gas condensate reservoir. Masters thesis, King Fahd University of Petroleum and Minerals.

(2000) Application of pulse-decay technique to characterize whole cores. Masters thesis, King Fahd University of Petroleum and Minerals.

(1996) Pressure transient behavior of a well in anisotropic reservoir intersected by multiple fractures. Masters thesis, King Fahd University of Petroleum and Minerals.

(1994) A Parametric study of water-coning in horizontal wells. Masters thesis, King Fahd University of Petroleum and Minerals.

(1997) Optimization of horizontal well completion : (position, length and perforation scenarios). Masters thesis, King Fahd University of Petroleum and Minerals.

(1987) Phase behavior and microemulsion studies on a Saudi Arabian crude. Masters thesis, King Fahd University of Petroleum and Minerals.

(1994) Development of empirical equations for water-oil relative permeability. Masters thesis, King Fahd University of Petroleum and Minerals.

(1999) Effect of liquid rop-out on the productivity of a rich gas condensate reservoir. Masters thesis, King Fahd University of Petroleum and Minerals.

(1994) Design of an Alkaline/Surfactant/Polymer enhanced oil recovery scheme for a Saudi Arabian limestone reservoir. Masters thesis, King Fahd University of Petroleum and Minerals.

(2003) Monitoring fluid fron movement using permanent resistivity arrays. Masters thesis, King Fahd University of Petroleum and Minerals.

(2005) Development and testing of an artificial neural network model for predicting bottomhole pressure in vertical multiphase flow. Masters thesis, King Fahd University of Petroleum and Minerals.

(2004) Laboratory study on precipitation of calcium sulphate in berea sandstone cores. Masters thesis, King Fahd University of Petroleum and Minerals.

(1987) Adsorption of surfactants on Saudi Arabian limestone. Masters thesis, King Fahd University of Petroleum and Minerals.

(1990) The Effect of high temperature and aging on water-base drilling fluids. Masters thesis, King Fahd University of Petroleum and Minerals.

(1991) Factors affecting mercury capillary pressure measurements. Masters thesis, King Fahd University of Petroleum and Minerals.

(2005) Evaluation of empirically derived PVT properties for Nigerian crude oils. Masters thesis, King Fahd University of Petroleum and Minerals.

(2006) Interference testing using horizontal wells in anisotropic reservoirs. Masters thesis, King Fahd University of Petroleum and Minerals.

(1992) A New Correlation for Two-Phase Flow Through Chokes. Masters thesis, KING FAHD UNIVERSITY OF PETROLEUM & MINERALS.

(1992) Surface Charge Behavior and Adsorption of Surfactants on Carbonate Rocks. Masters thesis, KING FAHD UNIVERSITY OF PETROLEUM & MINERALS.

(1992) Factors Affecting Pseudo Relative Permeability Curves. Masters thesis, KING FAHD UNIVERSITY OF PETROLEUM & MINERALS.

(1991) Factors Affecting Mercury Capillary Pressure Measurements. Masters thesis, KING FAHD UNIVERSITY OF PETROLEUM & MINERALS.

Article

(2006) Adaptive QoS-Based Scheduler for 4G CDMA Wireless Networks. Information and Communication Technologies, 2006. ICTTA '06. 2nd, 2.

(2006) Online Development of Digital Logic Design Course. Information and Communication Technologies, 2006. ICTTA '06. 2nd, 1.

(2006) A Study on Network Sharing and Radio Resource Management in 3G and Beyond Mobiles Wireless Networks Supporting Heterogeneous Traffic. Information and Communication Technologies, 2006. ICTTA '06. 2nd, 2.

(1993) Design of adaptive arrays based on element position perturbations. Antennas and Propagation, 1993., Eighth International conference, 1.

(2006) Performance of Resource Efficient Routing Protocols for ireless Ad-hoc Networks in the Presence of Channel Fading. Information and Communication Technologies, 2006. ICTTA '06. 2nd, 2.

(2006) Design Feasibility Study For A 500 Gbits/s AES Cypher Decypher Engine. Microelectronics, 2006. ICM '06. International conference, 1.

(2006) On Optimizing Backoff Procedure to Enhance Throughput and Fairness For Wireless LANs. Information and Communication Technologies, 2006. ICTTA '06. 2nd, 2.

(2003) Internal Model Control Structure Using Adaptive Inverse Control Strategy. Control and Automation, 2003. ICCA '03. Proceedings. 4th International conference, 1.

(2005) A Prioritized Uplink Call Admission Control Algorithm for 3G WCDMA Cellular Systems with Multi-Services. 3G and Beyond, 2005 6th IEE International conference, 1.

(1993) Speed optimised array architecture for flash EEPROMs. Circuits, Devices and Systems, IEE Proceedings G, 140.

Design Structural Stability Metrics and Post-Release Defect Density: An Empirical Study. Computer Software and Applications, 2006. COMPSAC '06 Supplement. 30th Annual International Conference, 1.

(2006) Interconnect-Efficient LDPC Code Design. Microelectronics, 2006. ICM '06. International conference, 1.

(2006) Higher-Order Neural Network Based Root-Solving Controller for Adaptive Tracking of Stable Nonlinear Plants. Engineering of Intelligent Systems, 2006 IEEE International conference, 1.

(2006) An Efficient Network-on-Chip Architecture Based on the Fat-Tree (FT) Topology. Microelectronics, 2006. ICM '06. International conference, 1.

(2006) CMOS Digitally Programmable Inductance. Microelectronics, 2006. ICM '06. International conference, 1.

(0000) Application of Heuristic Algorithms for Multiuser Detection. Communications, 2006. ICC '06. IEEE International conference, 7.

(2006) Simulation Optimization of a Four-Stage Supply Chain System. Information and Communication Technologies, 2006. ICTTA '06. 2nd, 2.

(2006) A Digital Clock Re-Timing Circuit for On-Chip Source-Synchronous Serial Links. Microelectronics, 2006. ICM '06. International conference, 1.

(2006) Performance Analysis of Coded Cooperation Diversity in Wireless Networks. Communications, 2006. ICC '06. IEEE International conference, 10.

(2007) Identification of errors-in-variables model with observation outliers based on Minimum-Covariance-Determinant. American Control Conference, 2007. ACC '07, 1.

(2006) A Portable Clock Recovery Circuit (CRC) For Systems-On-Chip Serial Data Communication. Microelectronics, 2006. ICM '06. International conference, 1.

(2006) Performance Analysis of Bit-Interleaved Space-Time (BI-ST) Coded Systems Over Wireless Channels. Communications, 2006. ICC '06. IEEE International conference, 3.

Non-Linear Multiple-Model State Estimation Scheme For Pipeline Leak Detection And Isolation. PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART I-JOURNAL OF SYSTEMS AND CONTROL ENGINEERING, 216. pp. 497-512.

PERMEABILITY ANISOTROPY DISTRIBUTIONS IN AN UPPER JURASSIC CARBONATE RESERVOIR, EASTERN SAUDI ARABIA. JOURNAL OF PETROLEUM GEOLOGY 30 (2) 2007.