Items where Subject is "Structural Engineering"

Up a level
Export as [feed] Atom [feed] RSS 1.0 [feed] RSS 2.0
Number of items at this level: 570.

Thesis

Active Vibration Control of a Smart Structure. Masters thesis, King Fahd University of Petroleum and Minerals.

EXPERIMENTAL AND NUMERICAL INVESTIGATIONS ON THE FLEXURAL BEHAVIOR OF STEEL BEAMS WITH SIMULATED CORROSION DAMAGE REPAIRED BY CARBON FIBER REINFORCED POLYMERS (CFRP). Masters thesis, King Fahd University of Petroleum and Minerals.

THE USE OF CARBONATED CALCIUM-RICH MATERIALS AS ADMIXTURES IN THE PRODUCTION OF OPC-BASED CONCRETE. Masters thesis, King Fahd University of Petroleum and Minerals.

RESPONSE OF CONCRETE SLABS REINFORCED WITH GLASS FIBER REINFORCED POLYMER (GFRP) BARS SUBJECTED TO FIRE LOAD. Masters thesis, King Fahd University of Petroleum and Minerals.

DEVELOPMENT OF STRUCTURAL SUPERCAPACITOR USING RED MUD-BASED CEMENTITIOUS COMPOSITE AS AN ELECTROLYTE. Masters thesis, King Fahd University of Petroleum and Minerals.

ENHANCING THE CONSTRUCTION RESILIENCE TO COPE WITH THE POST COVID-19 PRECAUTIONS MEASURES UNCERTAINTY: A FUZZY-BASED APPROACH. Masters thesis, King Fahd University of Petroleum and Minerals.

INVESTIGATING THE EFFECT OF ISOTHERMAL AND TEMPERED MICROSTRUCTURES ON THE PASSIVITY AND CORROSION RESISTANCE OF STEEL REBAR IN SIMULATED CONCRETE ENVIRONMENT. PhD thesis, King Fahd University of Petroleum and Minerals.

DEVELOPMENT OF ALKALI-ACTIVATED LOW-CARBON/NON-CARBONATE BINDERS UTILIZING INDIGENOUS MATERIALS. PhD thesis, King Fahd University of Petroleum and Minerals.

EVALUATION OF PERFORMANCE OF GFRP BAR-REINFORCED CONCRETE SLABS-ON-GROUND AND GFRP DOWELS AT JOINTS. PhD thesis, King Fahd University of Petroleum and Minerals.

Experimental and Numerical Investigations of Flexural Behavior of Concrete Hollow Beams Reinforced With GFRP Bars. Masters thesis, King Fahd University of Petroleum and Minerals.

An Integrated Model for Selection of Project Delivery System for Construction Project in Eastern Province of Saudi Arabia by using AHP –MAUT. Masters thesis, King Fahd University of Petroleum and Minerals.

Punching Shear Performance of Steel Fiber-Reinforced Recycled Aggregate Concrete Slabs Strengthened With Near Surface Mounted Composites. Masters thesis, King Fahd University of Petroleum and Minerals.

UTILIZATION OF FORM-STABLE PHASE CHANGE MATERIALS IN BUILDING APPLICATIONS UNDER HOT WEATHER CONDITIONS. PhD thesis, King Fahd University of Petroleum and Minerals.

Molecular Level Simulation of the Behavior of Concrete-Coating Interface under Hot-Humid Conditions. PhD thesis, King Fahd University of Petroleum and Minerals.

EXPERIMENTAL AND NUMERICAL INVESTIGATION OF THE FLEXURAL BEHAVIOR OF BFRP REINFORCED CONCRETE BEAMS. Masters thesis, King Fahd University of Petroleum and Minerals.

STUDY ON SYNTHESIS OF LIMESTONE CALCINED CLAY CEMENT (LC3) CONCRETE USING LOCAL CLAYS AND ITS DURABILITY. Masters thesis, King Fahd University of Petroleum and Minerals.

STACKING SEQUENCE OPTIMIZATION OF RECTANGULAR LAMINATED COMPOSITE PLATES. Masters thesis, King Fahd University of Petroleum and Minerals.

FRACTURE PROPAGATION IN QUASI-BRITTLE MATERIALS USING EXTENDED/GENERALIZED FINITE ELEMENT METHOD. Masters thesis, King Fahd University of Petroleum and Minerals.

DURABILITY STUDY AND CHARACTERIZATION OF SELF-COMPACTING CONCRETE DEVELOPED UTILIZING SILICO-MANGANESE FUME. Masters thesis, King Fahd University of Petroleum and Minerals.

DEVELOPING ENERGY-EFFICIENT BLOCKS IN THE FIELD USING INDIGENOUS INDUSTRIAL WASTE MATERIALS. Masters thesis, King Fahd University of Petroleum and Minerals.

COMMUNICATION MANAGEMENT AND CHALLENGES IN BUILDING CONSTRUCTION PROJECTS IN THE EASTERN PROVINCE, SAUDI ARABIA. Masters thesis, King Fahd University of Petroleum and Minerals.

Strengthening of Corroded Reinforced Concrete Beams Using Ultra High Performance Concrete (UHPC). PhD thesis, King Fahd University of Petroleum and Minerals.

Development of a Submicron/Nano Carbon Composite Coating from Industrial Waste for Application on Steel and Concrete Structures. PhD thesis, King Fahd University of Petroleum and Minerals.

FREE-VIBRATION OF A STEEL-CONCRETE COMPOSITE BEAM WITH WEB OPENINGS AN EXPERIMENTAL AND NUMERICAL ANALYSIS. Masters thesis, King Fahd University of Petroleum and Minerals.

FUZZY BASED MODELING FOR BIDDING DECISIONS AND MARKUP SIZE IN SAUDI ARABIA’S CONSTRUCTION INDUSTRY. Masters thesis, King Fahd University of Petroleum and Minerals.

SYNTHESIS OF GREEN ALKALI ACTIVATED CONCRETE USING GGBS, FLY ASH, AND WASTE LIMESTONE POWDER. Masters thesis, King Fahd University of Petroleum and Minerals.

BUCKLING AND VIBRATIONAL RESPONSE OF ADVANCED FUNCTIONALLY GRADED SANDWICH PLATE RESTING ON VISCOELASTIC FOUNDATION UNDER HYGRO-THERMAL ENVIRONMENT. Masters thesis, King Fahd University of Petroleum and Minerals.

Development of Self-compacting Concrete utilizing Silico Manganese Fume. Masters thesis, King Fahd University of Petroleum and Minerals.

INVESTIGATION OF WAVE PROPAGATION IN ADVANCED FUNCTIONALLY GRADED CERAMICMETAL PLATES WITH POROSITIES RESTING ON VISCOELASTIC FOUNDATION. Masters thesis, King Fahd University of Petroleum and Minerals.

HYGRO-THERMO-MECHANICAL BENDING BEHAVIOR OF ADVANCED FUNCTIONALLY GRADED CERAMIC METAL PLATES RESTING ON VISCOELASTIC FOUNDATIONS. Masters thesis, King Fahd University of Petroleum and Minerals.

INTERFACIAL BOND BEHAVIOR BETWEEN ULTRA HIGH-PERFORMANCE CONCRETE (UHPC) AND DIFFERENT CONCRETE SUBSTRATES. Masters thesis, King Fahd University of Petroleum and Minerals.

FLEXURAL STRENGTHENING OF CORRODED REINFORCED CONCRETE BEAMS USING HYBRID SYSTEM. Masters thesis, King Fahd University of Petroleum and Minerals.

LARGE DEFLECTION OF ANISOTROPIC THIN PLATES WITH DIFFERENT BOUNDARY CONDITION. PhD thesis, King Fahd University of Petroleum and Minerals.

EFFECT OF FIBER TYPE AND CURING REGIME ON THE MECHANICAL PROPERTIES OF ULTRA-HIGH PERFORMANCE CONCRETE. Masters thesis, King Fahd University of Petroleum and Minerals.

AN EXPERIMENTAL AND NUMERICAL STUDY ON STRENGTHENING OF RC BEAMS USING UHPC. Masters thesis, King Fahd University of Petroleum and Minerals.

Modelling of interfacial bond behavior between externally bonded FRP and concrete. Masters thesis, King Fahd University of Petroleum and Minerals.

INTERACTION DIAGRAM FOR A REINFORCED CONCRETE COLUMN STRENGTHENED WITH UHPC JACKET. Masters thesis, King Fahd University of Petroleum and Minerals.

A STUDY ON CARBON DIOXIDE SEQUESTRATION IN CONCRETE MIXTURES INCORPORATING CKD. Masters thesis, King Fahd University of Petroleum and Minerals.

INTERACTION DIAGRAM FOR A REINFORCED CONCRETE COLUMN STRENGTHENED WITH UHPC JACKET. Masters thesis, King Fahd University of Petroleum and Minerals.

Boundary-Type Ritz Method for the Analysis of Polygonal Plates. Masters thesis, King Fahd University of Petroleum and Minerals.

SYNTHESIS AND EVALUATION OF CEMENT KILN DUST-BASED ALKALI-ACTIVATED BINDER. PhD thesis, King Fahd University of Petroleum and Minerals.

Nonlinear Buckling of Cylindrical Shells Under Axial Compression. PhD thesis, King Fahd University of Petroleum and Minerals.

OPTIMIZATION -BASED SIMULATION MODEL FOR ALLOCATING CONSTRAINED BUDGET FOR BRIDGE MAINTENANCE IN KSA. Masters thesis, King Fahd University of Petroleum and Minerals.

Experimental Assessment and Numerical Validation of The Thermal Performance of Concrete Walls. Masters thesis, King Fahd University of Petroleum and Minerals.

STRENGTHENING OF CONCRETE-FILLED COLD-FORMED STAINLESS STEEL TUBULAR COLUMNS. PhD thesis, King Fahd University of Petroleum and Minerals.

PERFORMANCE EVALUATION OF MODIFIED-RECYCLED AGGREGATE CONCRETE. Masters thesis, King Fahd University of Petroleum and Minerals.

Key Performance Indicators for Construction Contractors in Saudi Arabia. Masters thesis, King Fahd University of Petroleum and Minerals.

EXPERIMENTAL INVESTIGATION AND MODELING OF CONCRETE STRUCTURES EXPOSED TO MOLTEN SULFUR. PhD thesis, King Fahd University of Petroleum and Minerals.

Experimental and Numerical Evaluation of Continuous Composite Girders Using UHPC Slab at Hogging Moment Region. PhD thesis, King Fahd University of Petroleum and Minerals.

ENERGY-BASED SOLUTION FOR THE BUCKLING OF CFRP STIFFENED STAINLESS STEEL CYLINDRICAL SHELLS. Masters thesis, King Fahd University of Petroleum and Minerals.

Development of High Performance Concrete Utilizing Indigenous Industrial Waste Materials and Nano-Silica. PhD thesis, King Fahd University of Petroleum and Minerals.

DEVELOPMENT OF SUSTAINABLE CONCRETE SET RETARDERS USING INDIGENOUS INDUSTRIAL BYPRODUCTS. Masters thesis, King Fahd University of Petroleum and Minerals.

DEVELOPMENT OF MODELS FOR CHLORIDE DIFFUSION UNDER FIELD AND LABORATORY CONDITIONS. PhD thesis, King Fahd University of Petroleum and Minerals.

DESIGNING POST DISASTER RECONSTRUCTION APPROACH USING BUILDING BACK BETTER (BBB) PRINCIPLES IN GAZA STRIP -PALESTINE. Masters thesis, King Fahd University of Petroleum and Minerals.

A FRAMEWORK FOR SINGLE AND MULTIPLE ANOMALIES LOCALIZATION IN PIPELINES. Masters thesis, King Fahd University of Petroleum and Minerals.

ENHANCING THE THERMAL INSULATION OF CONCRETE AND MASONRY HOLLOW CONCRETE BRICKS EXPERIMENTALLY AND ANALYTICALLY. Masters thesis, King Fahd University of Petroleum and Minerals.

THE EFFECTS OF COMPOSITION AND HEAT TREATMENT ON THE PASSIVATION OF STEEL REBAR IN CONCRETE SIMULATED ENVIRONMENT. Masters thesis, King Fahd University of Petroleum and Minerals.

DEVELOPMENT OF ALKALI-ACTIVATED BINDERS UTILIZING INDIGENOUS INDUSTRIAL WASTE MATERIALS. Masters thesis, King Fahd University of Petroleum and Minerals.

PERFORMANCE OF CONCRETE IN DIFFERENT MARINE EXPOSURE ZONES UTILIZING CEMENTITIOUS MATERIALS AND CHEMICAL ADDITIVES. Masters thesis, King Fahd University of Petroleum and Minerals.

Structural Behavior of Passively Reinforced Ultra-High Performance Concrete (UHPC) Beams. PhD thesis, King Fahd University of Petroleum and Minerals.

SEISMIC BEHAVIOR OF BEAM COLUMN JOINTS STRENGTHENED WITH ULTRA HIGH PERFORMANCE CONCRETE. Masters thesis, King Fahd University of Petroleum and Minerals.

DEVELOPMENT OF LIGHT WEIGHT, THERMAL RESISTANT CONCRETE UTILIZING RECYCLED PLASTIC AGGREGATES. Masters thesis, King Fahd University of Petroleum and Minerals.

A STUDY ON THE EFFECT OF DIFFERENT CURING REGIMES ON PERFORMANCE OF UHPC MIXTURES CONTAINING NATURAL POZZOLAN. Masters thesis, King Fahd University of Petroleum and Minerals.

ANALYSIS OF THIN PLATES SUPPORTED BY IRREGULAR LAYOUTS AND SHAPES OF INTERNAL SUPPORTS BY BOUNDARY POINT METHOD. Masters thesis, King Fahd University of Petroleum and Minerals.

Study on Shear Behavior of Ultra-High Performance Concrete (UHPC) Beams. Masters thesis, King Fahd University of Petroleum and Minerals.

MECHANICAL PROPERTIES OF GREEN RECYCLED AGGREGATE CONCRETE USING CONSTRUCTION AND DEMOLITION WASTE IN SAUDI ARABIA. Masters thesis, King Fahd University of Petroleum and Minerals.

Accurate Polynomial Solutions for Bending of Plates with Different Geometries, loadings and Boundary Conditions. Masters thesis, King Fahd University of Petroleum and Minerals.

DURABILITY CHARACTERISTICS OF GREEN CONCRETE USING RECYCLED EASTERN REGION SAUDI AGGREGATES. Masters thesis, King Fahd University of Petroleum and Minerals.

EXPERIMENTAL STUDY OF EXTERNALLY FLANGE BONDED CFRP FOR RETROFITTING BEAM – COLUMN JOINTS WITH HIGH CONCRETE COMPRESSIVE STRENGTH UNDER CYCLIC LOADING. Masters thesis, King Fahd University of Petroleum and Minerals.

CYCLIC RESPONSE OF BEAM COLUMN JOINTS STRENGTHENED WITH SUPERELASTIC SHAPE MEMORY ALLOYS (SMAs). PhD thesis, King Fahd University of Petroleum and Minerals.

Modelling of corroded reinforced concrete beams. Masters thesis, King Fahd University of Petroleum and Minerals.

A STUDY ON ACCELERATED CARBONATION CURING OF CONCRETE. Masters thesis, King Fahd University of Petroleum and Minerals.

Performance of UHPC Mixtures Subjected to Elevated Temperatures and Cyclic Exposures. Masters thesis, King Fahd University of Petroleum and Minerals.

DEVELOPMENT OF GEOPOLYMER CONCRETE INCORPORATING LOCAL WASTE MATERIALS. Masters thesis, King Fahd University of Petroleum and Minerals.

INVESTIGATION OF THE BEHAVIOR OF BEAM-COLUMN JOINTS (BCJS) REINFORCED WITH SHAPE MEMORY ALLOYS (SMAS). Masters thesis, King Fahd University of Petroleum and Minerals.

EXPERIMENTAL INVESTIGATION OF FLEXURAL BEHAVIOR OF ULTRA HIGH PERFORMANCE CONCRETE STRENGTHENED CONVENTIONAL RC BEAMS. Masters thesis, King Fahd University of Petroleum and Minerals.

INVESTIGATION OF THE PERFORMANCE OF CONCRETE MASONRY WALLS PLASTERED BY HIGH PERFORMANCE MORTAR UNDER CYCLIC LOADING. Masters thesis, King Fahd University of Petroleum and Minerals.

EXPERIMENTAL AND FEM INVESTIGATION OF THE PERFORMANCE OF CONCRETE MASONRY WALLS RETROFITTED USING STEEL FIBER REINFORCED MORTAR ADMIXED WITH MICROSILICA. Masters thesis, King Fahd University of Petroleum and Minerals.

Effects of Variation of Axial Load on Seismic Performance of RC Exterior BCJ's. Masters thesis, King Fahd University of Petroleum and Minerals.

MODELING & DESIGN OF PANEL ANCHOR IN PRECAST CONCRETE CONSTRUCTION. Masters thesis, King Fahd University of Petroleum and Minerals.

Partial Composite Action of Continuous Composite Steel Girders Strengthened with CFRP. Masters thesis, King Fahd University of Petroleum and Minerals.

EVALUATING THE PERFORMANCE OF PLAIN AND BLENDED CEMENT CONCRETES UNDER MARINE ENVIRONMENT IN THE ARABIAN GULF. Masters thesis, King Fahd University of Petroleum and Minerals.

BEHAVIOR AND MODELING OF CFRP RETROFITTED SANDSTONE BLOCK MASONRY WALLS. Masters thesis, King Fahd University of Petroleum and Minerals.

REHABILITATION OF CONTINUOUS COMPOSITE GIRDERS UTILIZING CFRP. Masters thesis, King Fahd University of Petroleum and Minerals.

DEVELOPMENT OF HIGH PERFORMANCE AND RADIATION SHIELDING CONCRETE UTILIZING INDIGENOUS INDUSTRIAL WASTE MATERIALS. Masters thesis, King Fahd University of Petroleum and Minerals.

A study on developing high performance non-shrinking grout (HPNSG) utilizing local materials. Masters thesis, King Fahd University of Petroleum and Minerals.

STUDY OF HIGH STRENGTH REINFORCED CONCRETE EXTERIOR BEAM-COLUMN JOINTS UNDER CYCLIC LOADING. Masters thesis, King Fahd University of Petroleum and Minerals.

Investigation of the Seismic Performance of Concrete Masonry Walls Plastered by Microsilica and Steel Fiber Admixed Mortar. Masters thesis, King Fahd University of Petroleum and Minerals.

EXPERIMENTAL AND NUMERICAL INVESTIGATIONS OF CONTINUOUS COMPOSITE GIRDERS REINFORCED WITH CFRP. PhD thesis, King Fahd University of Petroleum and Minerals.

MODELING OF POLYMER-BASED SELF-COMPACTING CONCRETE USING RHEOLOGICAL INDEXING. PhD thesis, King Fahd University of Petroleum and Minerals.

ANALYSIS AND DESIGN OF HIGH STRENGTH CONCRETE COLUMNS SUBJECTED TO COMPRESSION AND BIAXIAL BENDING. Masters thesis, King Fahd University of Petroleum and Minerals.

Development of Structural Lightweight Concrete Utilizing Local Materials. Masters thesis, King Fahd University of Petroleum and Minerals.

Development of Lightweight Concrete Utilizing Local Materials. Masters thesis, King Fahd University of Petroleum and Minerals.

RBF-BASED MESHLESS METHOD FOR LARGE DEFLECTION OF PLATES ON NONLINEAR FOUNDATIONS. PhD thesis, King Fahd University of Petroleum and Minerals.

Modeling of Cyclic Behavior of Retrofitted Beam-Column Joint. PhD thesis, King Fahd University of Petroleum and Minerals.

STRUCTURAL BEHAVIOR OF UNREINFORCED HYBRID SLAB ELEMENTS CAST WITH ULTRA-HIGH PERFORMANCE CONCRETE (UHPC). PhD thesis, King Fahd University of Petroleum and Minerals.

Production of sustainable concrete using indigenous Saudi Natural Pozzolan. Masters thesis, King Fahd University of Petroleum and Minerals.

A STUDY ON UTILIZING CHEMICAL INHIBITORS IN NEW REINFORCED CONCRETE STRUCTURES. Masters thesis, King Fahd University of Petroleum and Minerals.

PERFORMANCE EVALUATION OF CORROSION INHIBITORS FOR LOCAL CONDITIONS. Masters thesis, King Fahd University of Petroleum and Minerals.

EXPERIMENTAL INVESTIGATION AND NUMERICAL MODELING OF TWO-DIMENSIONAL CHLORIDE DIFFUSION IN CONCRETE. Masters thesis, King Fahd University of Petroleum and Minerals.

(2013) Experimental Investigation and Modeling the Heat of Hydration in Mass Concrete Structures. PhD thesis, King Fahd University of Petroleum and Minerals.

EFFECT OF CASTING TEMPERATURE AND CURING REGIME ON MECHANICAL PROPERTIES AND DURABILITY OF CONCRETE. Masters thesis, King Fahd University of Petroleum and Minerals.

AN EXPERIMENTAL AND NUMERICAL STUDY OF RETROFITTED MASONRY WALLS UNDER CYCLIC LOADING]. PhD thesis, King Fahd University of Petroleum and Minerals.

RELIABILITY-BASED STRENGTH PREDICTION MODEL FOR CORRODED REINFORCED CONCRETE COLUMNS AND BEAM-COLUMNS. PhD thesis, King Fahd University of Petroleum and Minerals.

Seismic evaluation and retrofit assessment of multistorey structures using pushover analysis (POA). Masters thesis, King Fahd University of Petroleum and Minerals.

RETROFITTING OF EXTERIOR BEAM-COLUMN JOINTS USING CFRP. Masters thesis, King Fahd University of Petroleum and Minerals.

A STUDY ON MIX DESIGN AND MECHANICAL PROPERTIES OF REACTIVE POWDER CONCRETE (RPC) UTILIZING FINE QUARTZ SAND. Masters thesis, King Fahd University of Petroleum and Minerals.

A STUDY ON DEVELOPING SELF-CONSOLIDATING CONCRETE (SCC) UTILIZING INDIGENOUS NATURAL AND INDUSTRIAL WASTE MATERIALS. Masters thesis, King Fahd University of Petroleum and Minerals.

Shear Strength of corroded reinforced concrete beams. Masters thesis, King Fahd University of Petroleum and Minerals.

PRODUCTION OF MEDIUM TO LOW STRENGTH CONCRETE UTILIZING INDIGENOUS WASTE PRODUCTS. Masters thesis, King Fahd University of Petroleum and Minerals.

Elemental Analysis of Concrete using Reflected Prompt Gamma-Rays. Masters thesis, King Fahd University of Petroleum and Minerals.

MODELING OF CONTINUOUS COMPOSITE PARTIALLY REINFORCED GIRDER WITH CFRP. Masters thesis, King Fahd University of Petroleum and Minerals.

SELF COMPACTING CONCRETE UTILIZING LOCAL MATERIALS. Masters thesis, King Fahd University of Petroleum and Minerals.

Computer-Aided Modeling and Simulation of Flow of Self Compacting Concrete. Masters thesis, King Fahd University of Petroleum and Minerals.

Study on Segregation and Rheology of Self Compacting Concrete. Masters thesis, King Fahd University of Petroleum and Minerals.

Simulation of Chloride Transport in Concrete with Stress Induced Damage. PhD thesis, King Fahd University of Petroleum and Minerals.

(2011) A STUDY OF BEHAVIOUR OF HORIZONTAL KNEE CONNECTIONS. Masters thesis, King Fahd University of Petroleum and Minerals.

(2011) DESIGN OF WAFFLE SLABS USING STRUT-AND-TIE MODEL. Masters thesis, King Fahd University of Petroleum and Minerals.

(2010) Impact of Combined Mechanical Damage on the Integrity of Pipelines. PhD thesis, King Fahd University of Petroleum and Minerals.

(2010) LIFE CYCLE COSTING FOR SELECTED STRUCTURAL MATERIALS FOR OFFSHORE PLATFORMS. Masters thesis, King Fahd University of Petroleum and Minerals.

(2010) Durability Assessment of Joint Assembly for Fiberglass Resin Coated Concrete Cylinder Pipes. Masters thesis, King Fahd University of Petroleum and Minerals.

(2009) OPTIMIZATION OF CONTINUOUS POST-TENSIONED CONCRETE BRIDGE GIRDERS WITH VARIABLE DEPTH. Masters thesis, King Fahd University of Petroleum and Minerals.

(1996) Plastic shrinkage cracking in hot weather conditions. Masters thesis, KFUPM.

(1986) Progressive fracture of reinforced deck slab in girder-slab type bridge deck. Masters thesis, KFUPM.

(1996) Protection of reinforced concrete using corrosion inhibitors and coatings. Masters thesis, KFUPM.

(1992) Strengthening of damaged reinforced concrete beams by external fiber glass plates. Masters thesis, KFUPM.

(1985) Studies on the evaluation of permeability and corrosion resisting characteristics of Portland pozzolan concrete. Masters thesis, KFUPM.

(1988) Study of various repair methods for reinforced concrete flexural members. Masters thesis, KFUPM.

(1996) The effect of casting and curing temperatures on the properties of concrete. Masters thesis, KFUPM.

(1993) The effect of temperature and salt contamination on corrosion of reinforcing steel in OPC and blended cement concretes. Masters thesis, KFUPM.

(1982) The Influence function technique in the numerical analysis of plate bending of arbitrary plan form. Masters thesis, KFUPM.

(1994) Three dimensional finite element analysis of brittle materials using CDM model. Masters thesis, KFUPM.

(1995) Use of small diameter cores in evaluation of in-situ concrete strength in Eastern Saudi Arabia. Masters thesis, KFUPM.

(2002) Plastic shrinkage cracking of blended cement concretes under hot weather conditions. Masters thesis, KFUPM.

(1995) Prediction of shear/peeling failure in plated R/C beams. Masters thesis, KFUPM.

(1995) Optimization of continuous post-tensioned bridge decks of prescribed lengths. Masters thesis, KFUPM.

(1991) Optimum design of continuous partially prestressed concrete beams. Masters thesis, KFUPM.

(2007) Optimum design of mat foundation. Masters thesis, KFUPM.

(1982) Performance of pozzolan cement concrete in a high chloride-sulphate environment. Masters thesis, KFUPM.

(2005) RBF-based meshless method for the analysis of thin elastic plates undergoing large deflections. Masters thesis, KFUPM.

(1994) Reduction in bond and the strength of slabs due to corrosion of reinforcement. Masters thesis, KFUPM.

(1982) Stability analysis of orthotropic plates by a mixed complementary energy method. Masters thesis, KFUPM.

(1985) Static analysis of horizontally curved bridge decks supported by flexible multi-girders. Masters thesis, KFUPM.

(1975) Strain survey on a small plate with a circular hole in the center. Masters thesis, KFUPM.

(1984) Strength of reinforced concrete beams in hot weather. Masters thesis, KFUPM.

(1988) Study of the effect of rust and corrosion of reinforcement on bond behavior. Masters thesis, KFUPM.

(1988) Study of the effect of rust and corrosion of reinforcemnt on bond behaviour. Masters thesis, KFUPM.

(1996) Numerical modeling of RC slabs on tensionless elastic subgrade. Masters thesis, KFUPM.

(1992) Optimal design of reinforced concrete frames. Masters thesis, KFUPM.

(1978) Optimization of Concrete strength using local aggregates from the Eastern Province of Saudi Arabia. Masters thesis, KFUPM.

(1997) Optimization of parabolic steel box arches. Masters thesis, KFUPM.

(2000) Performance evaluation of concrete coatings. Masters thesis, KFUPM.

(1996) Performance evaluation of concrete surface treatment materials. Masters thesis, KFUPM.

(1989) Performance of Epoxy-injected concrete in hot weather conditions. Masters thesis, KFUPM.

(1998) Performance optimization and modeling of slurry seal and micro surfacing utilizing steel slag aggregates. Masters thesis, KFUPM.

(1989) Load induced cracking and failure of concrete deck slabs in girder-slab type bridges. Masters thesis, KFUPM.

(1992) Nonlinear behavior of cylinder-plate junction on tensionless elastic subgrade. Masters thesis, KFUPM.

(2003) Influence of temperature and wind on moisture transport in cementitious materials. Masters thesis, KFUPM.

(2002) Evaluation of load transfer in axially loaded repaired concrete columns. Masters thesis, KFUPM.

(1992) Flexure and shear behaviour of damaged RC beams repaired by plate bonding. Masters thesis, KFUPM.

(1988) Fracture and permeability characteristics of thermally degraded concrete. Masters thesis, KFUPM.

(2005) Improving the performance of damaged FBECR in chloride-contaminated concrete. Masters thesis, KFUPM.

(1982) Electrical resistivity of concrete in relation to corrosion of reinforcement. Masters thesis, KFUPM.

(1995) Elasto-plastic collapse load analysis of single mitred bends. Masters thesis, KFUPM.

(2003) Effects of aggregate quality on reinforcement corrosion. Masters thesis, KFUPM.

(1990) Durability of reinforced concrete beams repaired with various repair materials. Masters thesis, KFUPM.

(1998) Continuum damage model for compressive fatigue of high strength concrete. Masters thesis, KFUPM.

(1985) Concrete mix design for hot weather. Masters thesis, KFUPM.

(1983) Sulfur infiltrated concrete box sections with poly styrene core as panel units. Masters thesis, KFUPM.

(1989) Use of latex modified concrete as a bridge deck overlay. Masters thesis, KFUPM.

(2005) A prediction model for the residual flexural strength of corroded reinforced concrete beams. Masters thesis, KFUPM.

(1982) A Study of development and performance of sulphur-based construction blocks. Masters thesis, KFUPM.

(2005) A study of mix design and durability of self compacting concrete. PhD thesis, KFUPM.

(1980) A Three-dimensional photoelastic investigation of the stress distribution in the anchorage zone of post-tensioned beams. Masters thesis, KFUPM.

(1981) An Investigation of corrosion of steel reinforcement in concrete in the Eastern Province of Saudi Arabia. Masters thesis, KFUPM.

(1995) Computational Modelling of shrinkage in repaired concrete. Masters thesis, KFUPM.

(2000) Analysis and design of buried pipelines. Masters thesis, KFUPM.

(1988) Analysis of horizontally curved pseudo slab type bridge deck continuous over discrete pier supports. Masters thesis, KFUPM.

(1990) Assessment of concrete strength by lok and capo tests. Masters thesis, KFUPM.

(1995) Bond and durability of fusion-bonded epoxy-coated steel bars. Masters thesis, KFUPM.

(1995) Boundary element analysis of nonprismatic beams and plates. Masters thesis, KFUPM.

(1982) Buckling of multiple braced columns. Masters thesis, KFUPM.

(1994) Chloride diffusion in concrete/prediction of the onset of corrosion in reinforced concrete structures. Masters thesis, KFUPM.

(1999) Analysis of static and dynamic characteristics of twin-cell steel box girders. Masters thesis, KFUPM.

(1980) Application of modified Reissner theory to sandwich plates. Masters thesis, KFUPM.

(1979) Approximate techniques towards solutions of Reissner plates. Masters thesis, KFUPM.

(1981) Computation of lateral-torsional buckling loads for nonprismatic beam-columns. Masters thesis, KFUPM.

(2005) Compliance criteria for quality concrete. Masters thesis, KFUPM.

(1985) Corrosion of reinforcing steel in sulphur concrete. Masters thesis, KFUPM.

(1983) Influence of transverse normal strain on finite, simply supported isotropic and orthotropic plates. Masters thesis, KFUPM.

(1978) Investigation into the modulus of elasticity of concrete. Masters thesis, KFUPM.

(1982) Optimization of concrete mix design using a statistical approach. Masters thesis, KFUPM.

(2006) Moisture transport and shrinkage in new generation concretes. Masters thesis, KFUPM.

(1987) Nonlinear finite element analysis of ferrocement beams. Masters thesis, KFUPM.

(1984) Material and fracture characterization of sisal fibre concrete. Masters thesis, KFUPM.

(1981) Optimizaiton of concrete mix design for durability in the Estern Province of Saudi Arabia. Masters thesis, KFUPM.

(1983) Minimum weight design of nonuniform steel I-girders and columns. Masters thesis, KFUPM.

(1986) Mixed mode fracture for concrete. Masters thesis, KFUPM.

(1985) Influence of cracks on the elastic stability of columns and frames. Masters thesis, KFUPM.

(1994) Deterioration of concrete structures in the coastal regions of the Republic of Yemen. Masters thesis, KFUPM.

(1988) Durability and thermal incompatibility of concrete constituents made from local materials in the Arabian Gulf Countries. Masters thesis, KFUPM.

(1984) Durability assessment criterion for concrete and reinforcement exposed to simulated environmental conditions of Saudi Arabia. Masters thesis, KFUPM.

(2005) Durability performance of GFRP bars under aggressive local exposure conditions. Masters thesis, KFUPM.

(1979) Economic proportioning of continuous steel I - beam. Masters thesis, KFUPM.

(2007) Effect of curing methods on properties of plain and blended cement concretes. Masters thesis, KFUPM.

(1987) Effect of fiber reinforcement on the durability of reinforced concrete in Arabian Gulf Region. Masters thesis, KFUPM.

(1979) Effect of the rigidity of columns and the dimensional changes in beams on post-tensioning forces. Masters thesis, KFUPM.

(1990) Evaluation of repair materials with emphasis on crack injection repair. Masters thesis, KFUPM.

(1989) Evaluation of shear behavior of ferrocement using direct shear specimen and beam specimen. Masters thesis, KFUPM.

(2007) Evaluation of ternary cements for improving concrete durability. Masters thesis, KFUPM.

(1985) Fatigue of concrete in the presence of a crack. Masters thesis, KFUPM.

(1976) Finite beams on an elastic foundation. Masters thesis, KFUPM.

(1989) Finite element modelling for the bending of thick plates. Masters thesis, KFUPM.

(1986) Flexural behavior of ferrocement I-beams and box-beams. Masters thesis, KFUPM.

(1988) Flexural behavior of ferrocement sandwich panels. Masters thesis, KFUPM.

(2006) Flexural behavior of prestressed precast hollow core slabs strengthened with CFRP sheets. Masters thesis, KFUPM.

(1990) Fracture modelling of reinforced concrete beams in mode I crack. Masters thesis, KFUPM.

(1985) Flexural behavior of reinforced sulphur concrete beams. Masters thesis, KFUPM.

(1991) Non-linear finite element modelling of reinforced concrete slabs. PhD thesis, KFUPM.

(1993) Non-linear finite element analysis of reinforced concrete beams repaired by plate bonding. PhD thesis, KFUPM.

(1998) Elastic plastic analysis of semi-rigid industrial frames. PhD thesis, KFUPM.

(2000) Iterative coupling of boundary and finite element methods. PhD thesis, KFUPM.

(1991) Mechanisms of high durability performance of plain and blended cements. PhD thesis, KFUPM.

(1991) Criteria for cathodic protection of steel in concrete in the context of Arabian Gulf environment. PhD thesis, KFUPM.

(1995) Canonical elastoplastic - damage modelling of reinforced concrete. PhD thesis, KFUPM.

(1989) A generalized theory for bending of thick isotropic rectangular plates. PhD thesis, KFUPM.

(2000) Analysis of laminated general shells undergoing finite rotations and large motion. PhD thesis, KFUPM.

(1999) Simulation and assessment of concrete repair systems. PhD thesis, KFUPM.

(2000) Elasto-damage fatigue modeling of RC beams strengthened by CFRP. PhD thesis, KFUPM.

(2000) Durability of high performance concrete. PhD thesis, KFUPM.

(2004) Computational chemo-damage transport modeling of durability synergies in concrete. PhD thesis, KFUPM.

(1978) Analysis of multi girder short span highway bridges. Masters thesis, KFUPM.

(1981) An Investigation of properties of concrete made with concrete rubble as aggregate. Masters thesis, KFUPM.

(1985) A Variational finite element solution for the Navier-Stokes equations in two dimensions. Masters thesis, KFUPM.

(1989) A refined theory for symmetric orthotropic laminated plates. Masters thesis, KFUPM.

(1985) A Photoelstic investigation of stress distribution in laterally loaded thin plates simulating window glass panels. Masters thesis, KFUPM.

(1980) A Photoelastic investigation of the stress distribution in the anchorage zones of post-tensioned concrete slabs. Masters thesis, KFUPM.

(1979) A Photoelastic investigation of stress distribution in deep beams with an without web opening. Masters thesis, KFUPM.

Article

Usage of Cement Kiln Dust in Cement Products – Research Review and Preliminary. Usage of Cement Kiln Dust in Cement Products – Research Review and Preliminary.

Large deformation analysis of plates on unilateral elastic foundation. Large deformation analysis of plates on unilateral elastic foundation.

Nonaxisymmetric unbonded contact of plates on tensionless Winkler foundations. Nonaxisymmetric unbonded contact of plates on tensionless Winkler foundations.

ANALYSIS OF LARGE OPENINGS IN CYLINDRICAL VESSELS INCLUDING NOZZLE FLEXIBILITY. ANALYSIS OF LARGE OPENINGS IN CYLINDRICAL VESSELS INCLUDING NOZZLE FLEXIBILITY..

Stability of vertically bent pipelines buried in sand. Stability of vertically bent pipelines buried in sand.

Finite element formulation of a third order laminated finite rotation shell element. Finite element formulation of a third order laminated finite rotation shell element.

Analysis and design of pipeline stiffened-anchor plate/flange. Analysis and design of pipeline stiffened-anchor plate/flange.

concrete plasticity model with elliptic failure surface and independent hardening/softening. concrete plasticity model with elliptic failure surface and independent hardening/softening.

Mixed hardening, three-invariants dependent cap model. Mixed hardening, three-invariants dependent cap model.

Layered nonhomogeneous curved beam elements for inelastic analysis. Layered nonhomogeneous curved beam elements for inelastic analysis.

Performance of plain and blended cements exposed to high sulphate concentrations. Performance of plain and blended cements exposed to high sulphate concentrations.

Sulfate resistance of plain and blended cements exposed to magnesium sulfate solutions. Sulfate resistance of plain and blended cements exposed to magnesium sulfate solutions.

29Si MAS-NMR study of hydrated cement paste and mortar with varying content of fly ash. 29Si MAS-NMR study of hydrated cement paste and mortar with varying content of fly ash.

Effect of inhibitor treatment on corrosion of steel in a salt solution. Effect of inhibitor treatment on corrosion of steel in a salt solution.

Mechanical properties and durability characteristics of polymer- and cement-based repair materials. Mechanical properties and durability characteristics of polymer- and cement-based repair materials.

Sulfate resistance of plain and blended cements exposed to varying concentrations of sodium sulfate. Sulfate resistance of plain and blended cements exposed to varying concentrations of sodium sulfate.

Effect of waterproofing coatings on steel reinforcement corrosion and physical properties of concrete. Effect of waterproofing coatings on steel reinforcement corrosion and physical properties of concrete.

Effect of rebar cleanliness and repair materials on reinforcement corrosion and flexural strength of repaired concrete beams. Effect of rebar cleanliness and repair materials on reinforcement corrosion and flexural strength of repaired concrete beams.

Effect of environmental pre-conditioning on bond of FRP reinforcement to concrete. Effect of environmental pre-conditioning on bond of FRP reinforcement to concrete.

Evaluation of bond using FRP rods with axisymmetric deformations. Evaluation of bond using FRP rods with axisymmetric deformations.

Effect of Cyclic Loading on Bond Behavior of GFRP Rods Embedded in Concrete Beams. Effect of Cyclic Loading on Bond Behavior of GFRP Rods Embedded in Concrete Beams.

29Si MAS-NMR study of hydrated cement paste and mortar made with and without silica fume. 29Si MAS-NMR study of hydrated cement paste and mortar made with and without silica fume.

29Si magic-angle-spinning nuclear magnetic resonance study of hydrated cement paste and mortar. 29Si magic-angle-spinning nuclear magnetic resonance study of hydrated cement paste and mortar.

Contractor financing, public works in Saudi Arabia. Contractor financing, public works in Saudi Arabia.

29Si MAS-NMR hydration and compressive strength study in cement paste. 29Si MAS-NMR hydration and compressive strength study in cement paste.

Effect of steel manufacturing process and atmospheric corrosion on the corrosion-resistance of steel bars in concrete. Effect of steel manufacturing process and atmospheric corrosion on the corrosion-resistance of steel bars in concrete.

HLXVIB - A computer code for free vibration analysis of circular helicoidal bars. HLXVIB - A computer code for free vibration analysis of circular helicoidal bars.

Computer algorithm for the static analysis of circular helicoidal bars. Computer algorithm for the static analysis of circular helicoidal bars.

Loss of punching capacity of bridge deck slabs from crack damage. Loss of punching capacity of bridge deck slabs from crack damage.

Assessment of damage to concrete girder-slab bridges in Saudi Arabia. Assessment of damage to concrete girder-slab bridges in Saudi Arabia.

Categorization of damage to concrete bridge decks in Saudi Arabia. Categorization of damage to concrete bridge decks in Saudi Arabia.

Performance of epoxy-repaired concrete under thermal cycling. Performance of epoxy-repaired concrete under thermal cycling.

Third order shear deformation model for laminated shells with finite rotations: Formulation and consistent linearization. Third order shear deformation model for laminated shells with finite rotations: Formulation and consistent linearization.

Effect of silica fume on the mechanical properties of low quality coarse aggregate concrete. Effect of silica fume on the mechanical properties of low quality coarse aggregate concrete.

Effectiveness of corrosion inhibitors in contaminated concrete. Effectiveness of corrosion inhibitors in contaminated concrete.

Effectiveness of surface coatings in improving concrete durability. Effectiveness of surface coatings in improving concrete durability.

Effect of coarse aggregate quality on the mechanical properties of high strength concrete. Effect of coarse aggregate quality on the mechanical properties of high strength concrete.

Performance of concrete coatings under varying exposure conditions. Performance of concrete coatings under varying exposure conditions.

Effect of degree of corrosion on the properties of reinforcing steel bars. Effect of degree of corrosion on the properties of reinforcing steel bars.

Dynamics of flexible-link and flexible-joint manipulator carrying a payload with rotary inertia. Dynamics of flexible-link and flexible-joint manipulator carrying a payload with rotary inertia.

Effect of mix proportions on plastic shrinkage cracking of concrete in hot environments. Effect of mix proportions on plastic shrinkage cracking of concrete in hot environments.

Plastic shrinkage cracking of concrete in hot-arid environments. Plastic shrinkage cracking of concrete in hot-arid environments.

Evaluation of repair materials for functional improvement of slabs and beams with corroded reinforcement. Evaluation of repair materials for functional improvement of slabs and beams with corroded reinforcement.

Effectiveness of concrete surface treatment materials in reducing chloride-induced reinforcement corrosion. Effectiveness of concrete surface treatment materials in reducing chloride-induced reinforcement corrosion.

Three-dimensional Mohr's circle for shear stress components. Three-dimensional Mohr's circle for shear stress components.

Three-dimensional graphical method for shear strain analysis. Three-dimensional graphical method for shear strain analysis.

Effectiveness of concrete surface treatment materials in reducing chloride-induced reinforcement corrosion. Effectiveness of concrete surface treatment materials in reducing chloride-induced reinforcement corrosion.

Effect of reinforcement corrosion on bond strength. Effect of reinforcement corrosion on bond strength.

Effect of reinforcement corrosion on flexural behavior of concrete slabs. Effect of reinforcement corrosion on flexural behavior of concrete slabs.

Dynamic response of circular cylinders in cross-flow. Dynamic response of circular cylinders in cross-flow.

Energy-momentum conserving algorithm for nonlinear dynamics of laminated shells based on a third-order shear deformation theory. Energy-momentum conserving algorithm for nonlinear dynamics of laminated shells based on a third-order shear deformation theory.

Si MAS-NMR study of hydrated cement paste and mortar with varying content of fly ash. Si MAS-NMR study of hydrated cement paste and mortar with varying content of fly ash.

STRESS DISTRIBUTION IN DEEP BEAMS WITH WEB OPENINGS. STRESS DISTRIBUTION IN DEEP BEAMS WITH WEB OPENINGS..

Development of calcium silicate thermal insulator in Saudi Arabia. Development of calcium silicate thermal insulator in Saudi Arabia.

Evaluation of corrosion resistance of reinforcing steel in sulfur concrete. Evaluation of corrosion resistance of reinforcing steel in sulfur concrete.

Effect of hot weather on strength of reinforced concrete beams. Effect of hot weather on strength of reinforced concrete beams.

Permeability and durability of plain and blended cement concretes cured in field and laboratory conditions. Permeability and durability of plain and blended cement concretes cured in field and laboratory conditions.

EFFECT OF HOT CLIMATE ON SHEAR STRENGTH OF CONCRETE. EFFECT OF HOT CLIMATE ON SHEAR STRENGTH OF CONCRETE.

Effect of sulfate ions on the corrosion of rebars embedded in concrete. Effect of sulfate ions on the corrosion of rebars embedded in concrete.

EFFECT OF FILLER TYPE ON THE DURABILITY OF SULFUR-SAND COMPOSITES IN THE ARABIAN GULF COUNTRIES. EFFECT OF FILLER TYPE ON THE DURABILITY OF SULFUR-SAND COMPOSITES IN THE ARABIAN GULF COUNTRIES..

CORROSION OF STEEL REINFORCEMENT IN SULFUR CONCRETE. CORROSION OF STEEL REINFORCEMENT IN SULFUR CONCRETE.

Si magic-angle-spinning nuclear magnetic resonance study of hydrated cement paste and mortar. Si magic-angle-spinning nuclear magnetic resonance study of hydrated cement paste and mortar.

Si MAS-NMR study of hydrated cement paste and mortar made with and without silica fume. Si MAS-NMR study of hydrated cement paste and mortar made with and without silica fume.

Use of polypropylene fibers to enhance deterioration resistance of concrete surface skin subjected to cyclic wet/dry sea water exposure. Use of polypropylene fibers to enhance deterioration resistance of concrete surface skin subjected to cyclic wet/dry sea water exposure.

Effect of sulfate and carbonate ions on reinforcing steel corrosion as evaluated using AC impedance spectroscopy. Effect of sulfate and carbonate ions on reinforcing steel corrosion as evaluated using AC impedance spectroscopy.

Corrosion behavior of pre-rusted rebars after placement in concrete. Corrosion behavior of pre-rusted rebars after placement in concrete.

Corrosion of steel reinforcement in polypropylene fiber reinforced concrete structures. Corrosion of steel reinforcement in polypropylene fiber reinforced concrete structures.

CORROSION RATE MEASUREMENTS OF REINFORCING STEEL IN CONCRETE BY ELECTROCHEMICAL TECHNIQUES. CORROSION RATE MEASUREMENTS OF REINFORCING STEEL IN CONCRETE BY ELECTROCHEMICAL TECHNIQUES..

Effect of thermal cycling on the durability of concrete made from local materials in the Arabian Gulf countries. Effect of thermal cycling on the durability of concrete made from local materials in the Arabian Gulf countries.

Si MAS-NMR hydration and compressive strength study in cement paste. Si MAS-NMR hydration and compressive strength study in cement paste.

LABORATORY STUDY ON THE EFFECT OF SULFATE IONS ON REBAR CORROSION. LABORATORY STUDY ON THE EFFECT OF SULFATE IONS ON REBAR CORROSION..

EVALUATION OF DEGREE OF HYDRATION IN CONCRETE USING **2**9Si MAGIC ANGLE SPINNING NMR IN SOLIDS. EVALUATION OF DEGREE OF HYDRATION IN CONCRETE USING **2**9Si MAGIC ANGLE SPINNING NMR IN SOLIDS..

EFFECT OF POLYPROPYLENE FIBER REINFORCEMENT ON THE PROPERTIES OF FRESH AND HARDENED CONCRETE IN THE ARABIAN GULF ENVIRONMENT. EFFECT OF POLYPROPYLENE FIBER REINFORCEMENT ON THE PROPERTIES OF FRESH AND HARDENED CONCRETE IN THE ARABIAN GULF ENVIRONMENT..

EFFECT OF HOT WEATHER ON MODULUS OF RUPTURE AND SPLITTING TENSILE STRENGTH OF CONCRETE. EFFECT OF HOT WEATHER ON MODULUS OF RUPTURE AND SPLITTING TENSILE STRENGTH OF CONCRETE..

A simple arrangement and procedure for in-situ measurement of corrosion rate of rebar embedded in concrete. A simple arrangement and procedure for in-situ measurement of corrosion rate of rebar embedded in concrete.

Assessment of service lives of R.C. structures subjected to chloride-induced rebar corrosion. Assessment of service lives of R.C. structures subjected to chloride-induced rebar corrosion.

Experimental service life prediction of rebar corroded R.C. structure. Experimental service life prediction of rebar corroded R.C. structure.

Design procedures for cathodic protection systems for R.C.C. members. Design procedures for cathodic protection systems for R.C.C. members.

Empirical modelling of indicators of chloride-induced rebar corrosion. Empirical modelling of indicators of chloride-induced rebar corrosion.

Reinforcement corrosion in concrete structures, its monitoring and service life prediction - A review. Reinforcement corrosion in concrete structures, its monitoring and service life prediction - A review.

Chloride penetration into silica fume concrete subject to different exposures. Chloride penetration into silica fume concrete subject to different exposures.

Residual strength of corrosion-damaged reinforced concrete beams. Residual strength of corrosion-damaged reinforced concrete beams.

Optimum concrete mixture design using locally available ingredients. Optimum concrete mixture design using locally available ingredients.

Compliance criteria for quality concrete. Compliance criteria for quality concrete.

Correlations between depth of water penetration, chloride permeability, and coefficient of chloride diffusion in plain, silica fume, and fly ash cement concretes. Correlations between depth of water penetration, chloride permeability, and coefficient of chloride diffusion in plain, silica fume, and fly ash cement concretes.

A study of the relationship between permeability and tortuosity of concrete. A study of the relationship between permeability and tortuosity of concrete. (Submitted)

Correlation between strength and durability indices of plain and blended cement concretes. Correlation between strength and durability indices of plain and blended cement concretes. (Submitted)

A study of self-compacting concrete made with marginal aggregates. A study of self-compacting concrete made with marginal aggregates. (In Press)

Behaviour of patch repair of axially loaded reinforced concrete beams. Behaviour of patch repair of axially loaded reinforced concrete beams.

Use of surface treatment materials to improve concrete durability. Use of surface treatment materials to improve concrete durability.

Plastic shrinkage cracking of concrete in hot-arid environments. Plastic shrinkage cracking of concrete in hot-arid environments.

Effectiveness of concrete surface treatment materials in reducing chloride-induced reinforcement corrosion. Effectiveness of concrete surface treatment materials in reducing chloride-induced reinforcement corrosion.

Chloride threshold for corrosion of reinforcement in concrete. Chloride threshold for corrosion of reinforcement in concrete.

Effect of reinforcement corrosion on flexural behavior of concrete slabs. Effect of reinforcement corrosion on flexural behavior of concrete slabs.

Effect of reinforcement corrosion on bond strength. Effect of reinforcement corrosion on bond strength.

Factors affecting threshold chloride for reinforcement corrosion in concrete. Factors affecting threshold chloride for reinforcement corrosion in concrete.

Design optimization of continuous partially prestressed concrete beams. Design optimization of continuous partially prestressed concrete beams.

Al-Gahtani, A.S., Al-Mussallam, A.A. Al-Gahtani, A.S., Al-Mussallam, A.A..

Rebar corrosion and sulfate resistance of blast-furnace slag cement. Rebar corrosion and sulfate resistance of blast-furnace slag cement.

Influence of sulfates on chloride binding in cements. Influence of sulfates on chloride binding in cements.

Corrosion of reinforcing steel in fly ash blended cement concrete. Corrosion of reinforcing steel in fly ash blended cement concrete.

Corrosion cracking in relation to bar diameter, cover, and concrete quality. Corrosion cracking in relation to bar diameter, cover, and concrete quality.

Reinforcement corrosion-resisting characteristics of silica-fume blended-cement concrete. Reinforcement corrosion-resisting characteristics of silica-fume blended-cement concrete.

Pore solution composition and reinforcement corrosion characteristics of microsilica blended cement concrete. Pore solution composition and reinforcement corrosion characteristics of microsilica blended cement concrete.

Effect of tricalcium aluminate content of cement on corrosion of reinforcing steel in concrete. Effect of tricalcium aluminate content of cement on corrosion of reinforcing steel in concrete.

Influence of cement composition on the corrosion of reinforcement and sulfate resistance of concrete. Influence of cement composition on the corrosion of reinforcement and sulfate resistance of concrete.

Influence of construction practices on concrete durability. Influence of construction practices on concrete durability.

Software For Optimum Design Of Highway Bridge Beams. Software For Optimum Design Of Highway Bridge Beams..

Deterioration Of Concrete Structures In The Environment Of The Middle East. Deterioration Of Concrete Structures In The Environment Of The Middle East..

Chloride diffusion coefficient of concrete in the Arabian Gulf environment. Chloride diffusion coefficient of concrete in the Arabian Gulf environment.

Determination of the effective chloride diffusion coefficient in concrete via a gas diffusion technique. Determination of the effective chloride diffusion coefficient in concrete via a gas diffusion technique.

Modelling of damaged RC beams strengthened by fibre composite plates. Modelling of damaged RC beams strengthened by fibre composite plates.

Strengthening of shear-damaged RC beams by external bonding of steel plates. Strengthening of shear-damaged RC beams by external bonding of steel plates.

Shear strength of plated RC beams. Shear strength of plated RC beams.

Creep loss variation in prestressed concrete beams. Creep loss variation in prestressed concrete beams.

Flexural behaviour of precracked reinforced concrete beams strengthened externally by steel plates. Flexural behaviour of precracked reinforced concrete beams strengthened externally by steel plates.

Combined experimental-numerical approach to characterization of steel-glue-concrete interface. Combined experimental-numerical approach to characterization of steel-glue-concrete interface.

Guidelines toward the design of reinforced concrete beams with external plates. Guidelines toward the design of reinforced concrete beams with external plates.

Shear repair for reinforced concrete by fiberglass plate bonding. Shear repair for reinforced concrete by fiberglass plate bonding.

Strengthening of initially loaded reinforced concrete beams using FRP plates. Strengthening of initially loaded reinforced concrete beams using FRP plates.

Time-dependent losses in prestressed, continuous composite beams. Time-dependent losses in prestressed, continuous composite beams.

Loss of punching capacity of bridge deck slabs from crack damage. Loss of punching capacity of bridge deck slabs from crack damage.

Confirmation of TICC damage hypothesis. Petrographic study. Confirmation of TICC damage hypothesis. Petrographic study.

Categorization of damage to concrete bridge decks in Saudi Arabia. Categorization of damage to concrete bridge decks in Saudi Arabia.

Effect of thermal cycling on the durability of concrete made from local materials in the Arabian Gulf countries. Effect of thermal cycling on the durability of concrete made from local materials in the Arabian Gulf countries.

Partially Prestressed Continuous Composite Beams.I. Partially Prestressed Continuous Composite Beams.I..

Partially Prestressed Composite Beams. II. Partially Prestressed Composite Beams. II.

Performance evaluation of slow sand filters using fuzzy rule-based modelling. Performance evaluation of slow sand filters using fuzzy rule-based modelling.

Identifying water quality sampling stations in Al-Khobar water distribution system, Kingdom of Saudi Arabia. Identifying water quality sampling stations in Al-Khobar water distribution system, Kingdom of Saudi Arabia.

Stochastic goal programming model for optimal blending of desalinated water with groundwater. Stochastic goal programming model for optimal blending of desalinated water with groundwater.

Secondary effluent treatment by slow sand filters: Performance and risk analysis. Secondary effluent treatment by slow sand filters: Performance and risk analysis.

Optimizing water quality monitoring stations using genetic algorithms. Optimizing water quality monitoring stations using genetic algorithms.

An algorithm for designing a precipitation network in the south-western region of Saudi Arabia. An algorithm for designing a precipitation network in the south-western region of Saudi Arabia.

Biology of Phlebotomus sandflies (Diptera: Psychodidae) in two contrasting leishmaniasis foci of south-west Saudi Arabia. Biology of Phlebotomus sandflies (Diptera: Psychodidae) in two contrasting leishmaniasis foci of south-west Saudi Arabia.

Spatiotemporal stochastic open-channel flow. II: Simulation experiments. Spatiotemporal stochastic open-channel flow. II: Simulation experiments.

Spatiotemporal stochastic open-channel flow. I: Model and its parameter data. Spatiotemporal stochastic open-channel flow. I: Model and its parameter data.

Performance of corrosion resisting steels in chloride-bearing concrete. Performance of corrosion resisting steels in chloride-bearing concrete.

Influence of cement composition on the corrosion of reinforcement and sulfate resistance of concrete. Influence of cement composition on the corrosion of reinforcement and sulfate resistance of concrete.

TOWARD SOLVING THE CONCRETE DETERIORATION PROBLEM IN THE GULF REGION. TOWARD SOLVING THE CONCRETE DETERIORATION PROBLEM IN THE GULF REGION..

Performance of plain and blended cements exposed to varying concentrations of sodium sulphate. Performance of plain and blended cements exposed to varying concentrations of sodium sulphate.

Performance of plain and blended cements exposed to high sulphate concentrations. Performance of plain and blended cements exposed to high sulphate concentrations.

Effect of chloride concentration in soil on reinforcement corrosion. Effect of chloride concentration in soil on reinforcement corrosion.

29Si MAS-NMR study of hydrated cement paste and mortar with varying content of fly ash. 29Si MAS-NMR study of hydrated cement paste and mortar with varying content of fly ash.

Inhibition of atmospheric corrosion of mild steel by sodium dihydrogen orthophosphate treatment. Inhibition of atmospheric corrosion of mild steel by sodium dihydrogen orthophosphate treatment.

Effect of inhibitor treatment on corrosion of steel in a salt solution. Effect of inhibitor treatment on corrosion of steel in a salt solution.

Mechanical properties and durability characteristics of polymer- and cement-based repair materials. Mechanical properties and durability characteristics of polymer- and cement-based repair materials.

Sulfate resistance of plain and blended cements exposed to varying concentrations of sodium sulfate. Sulfate resistance of plain and blended cements exposed to varying concentrations of sodium sulfate.

Effect of steel manufacturing process and atmospheric corrosion on the corrosion-resistance of steel bars in concrete. Effect of steel manufacturing process and atmospheric corrosion on the corrosion-resistance of steel bars in concrete.

Effect of rebar cleanliness and repair materials on reinforcement corrosion and flexural strength of repaired concrete beams. Effect of rebar cleanliness and repair materials on reinforcement corrosion and flexural strength of repaired concrete beams.

Effect of waterproofing coatings on steel reinforcement corrosion and physical properties of concrete. Effect of waterproofing coatings on steel reinforcement corrosion and physical properties of concrete.

Effect of environmental pre-conditioning on bond of FRP reinforcement to concrete. Effect of environmental pre-conditioning on bond of FRP reinforcement to concrete.

Evaluation of bond using FRP rods with axisymmetric deformations. Evaluation of bond using FRP rods with axisymmetric deformations.

Effect of Cyclic Loading on Bond Behavior of GFRP Rods Embedded in Concrete Beams. Effect of Cyclic Loading on Bond Behavior of GFRP Rods Embedded in Concrete Beams.

29Si MAS-NMR study of hydrated cement paste and mortar made with and without silica fume. 29Si MAS-NMR study of hydrated cement paste and mortar made with and without silica fume.

Geometries and energy separations of electronic states of GeF2, SnF2, and PbF2 and their positive ions. Geometries and energy separations of electronic states of GeF2, SnF2, and PbF2 and their positive ions.

Use of polypropylene fibers to enhance deterioration resistance of concrete surface skin subjected to cyclic wet/dry sea water exposure. Use of polypropylene fibers to enhance deterioration resistance of concrete surface skin subjected to cyclic wet/dry sea water exposure.

Corrosion of steel reinforcement in polypropylene fiber reinforced concrete structures. Corrosion of steel reinforcement in polypropylene fiber reinforced concrete structures.

EFFECT OF POLYPROPYLENE FIBER REINFORCEMENT ON THE PROPERTIES OF FRESH AND HARDENED CONCRETE IN THE ARABIAN GULF ENVIRONMENT. EFFECT OF POLYPROPYLENE FIBER REINFORCEMENT ON THE PROPERTIES OF FRESH AND HARDENED CONCRETE IN THE ARABIAN GULF ENVIRONMENT..

Loss Of Punching Capacity Of Bridge Deck Slabs From Crack Damage. Loss Of Punching Capacity Of Bridge Deck Slabs From Crack Damage.

Combined experimental-numerical approach to characterization of steel-glue-concrete interface. Combined experimental-numerical approach to characterization of steel-glue-concrete interface.

Nonlinear Finite Element Modelling Of Failure Modes In RC Slabs. Nonlinear Finite Element Modelling Of Failure Modes In RC Slabs.

Stress Analysis For Thick Rectangular Plates. Stress Analysis For Thick Rectangular Plates.

Punching capacity of deck slabs in girder-slab bridges. Punching capacity of deck slabs in girder-slab bridges.

Generalized Theory For Bending Of Thick Plates. Generalized Theory For Bending Of Thick Plates.

Guidelines toward the design of reinforced concrete beams with external plates. Guidelines Toward The Design Of Reinforced Concrete Beams With External Plates.

Repaired Reinforced Concrete Beams. Repaired Reinforced Concrete Beams.

Sensitivity study of criteria governing collapse of centrally loaded R/C slabs. Sensitivity study of criteria governing collapse of centrally loaded R/C slabs.

Predicting residual strength in unsaturated concrete exposed to sulfate attack. Predicting residual strength in unsaturated concrete exposed to sulfate attack.

Loss of punching capacity of bridge deck slabs from crack damage. Loss of punching capacity of bridge deck slabs from crack damage.

Influence Of Non-Propagating Cracks On Conservative Buckling Of Columns. Influence Of Non-Propagating Cracks On Conservative Buckling Of Columns..

Analysis Of Continuous Curved Girder-Slab Bridges. Analysis Of Continuous Curved Girder-Slab Bridges.

Optimization Of Built-Up Nonuniform Steel I-Beams. Optimization Of Built-Up Nonuniform Steel I-Beams..

CDM model for residual strength of concrete under cyclic compression. CDM model for residual strength of concrete under cyclic compression.

Stress analysis for thick rectangular plates. Stress analysis for thick rectangular plates.

Crack minimization model for hot weather concreting. Crack minimization model for hot weather concreting.

Categorization of damage to concrete bridge decks in Saudi Arabia. Categorization of damage to concrete bridge decks in Saudi Arabia.

Performance Of Epoxy-Repaired Concrete Under Thermal Cycling. Performance Of Epoxy-Repaired Concrete Under Thermal Cycling.

Nonlinear finite element modelling of failure modes in RC slabs. Nonlinear finite element modelling of failure modes in RC slabs.

Fracture energy of weakly reinforced concrete beams. Fracture energy of weakly reinforced concrete beams.

Effect Of Thermal Cycling On The Durability Of Concrete Made From Local Materials In The Arabian Gulf Countries. Effect Of Thermal Cycling On The Durability Of Concrete Made From Local Materials In The Arabian Gulf Countries.

Effect Of Filler Type On The Durability Of Sulfur-Sand Composites In The Arabian Gulf Countries. Effect Of Filler Type On The Durability Of Sulfur-Sand Composites In The Arabian Gulf Countries..

Simulation of shrinkage distress and creep relief in concrete repair. Simulation of shrinkage distress and creep relief in concrete repair.

Performance of epoxy-repaired concrete under thermal cycling. Performance of epoxy-repaired concrete under thermal cycling.

Analysis of continuous curved girder-slab bridges. Analysis of continuous curved girder-slab bridges.

Mode shapes and crack damage in subtangential buckling of columns. Mode shapes and crack damage in subtangential buckling of columns.

Mode Shapes And Crack Damage In Subtangential Buckling Of Columns. Mode Shapes And Crack Damage In Subtangential Buckling Of Columns.

Corrosion Of Steel Reinforcement In Sulfur Concrete. Corrosion Of Steel Reinforcement In Sulfur Concrete..

Risks of cracking and delamination in patch repair. Risks of cracking and delamination in patch repair.

Inclusion Of Transverse Normal Strain Effects Into The Finite Element Formulation Of Timoshenko Beams. Inclusion Of Transverse Normal Strain Effects Into The Finite Element Formulation Of Timoshenko Beams..

Flexure Of Statically Indeterminate Cracked Beams. Flexure Of Statically Indeterminate Cracked Beams..

Use Of Plasticized Sulphur In Sisal-Fibre Concrete. Use Of Plasticized Sulphur In Sisal-Fibre Concrete..

Damage model for monotonic and fatigue response of high strength concrete. Damage model for monotonic and fatigue response of high strength concrete.

Influence Of Non-Propagating Cracks On Conservative Buckling Of Columns. Influence Of Non-Propagating Cracks On Conservative Buckling Of Columns..

Technical Theory Of Beams With Normal Strain. Technical Theory Of Beams With Normal Strain..

Corrosion Of Steel Reinforcement In Sulfur Concrete. Corrosion Of Steel Reinforcement In Sulfur Concrete..

Flexure Of Statically Indeterminate Cracked Beams. Flexure Of Statically Indeterminate Cracked Beams..

Effects Of Shear And Normal Strain On Plate Bending. Effects Of Shear And Normal Strain On Plate Bending..

Use Of Plasticized Sulphur In Sisal-Fibre Concrete. Use Of Plasticized Sulphur In Sisal-Fibre Concrete..

Influence Functions In The Numerical Analysis Of Bending Of Thin Elastic Plates. Influence Functions In The Numerical Analysis Of Bending Of Thin Elastic Plates..

Technical Theory Of Beams With Normal Strain. Technical Theory Of Beams With Normal Strain..

Refined Theory For Isotropic Plates. Refined Theory For Isotropic Plates..

Minimum Weight Design Of Tapered Steel I-Columns. Minimum Weight Design Of Tapered Steel I-Columns..

Method Of Weighted Residuals As Applied To Nonlinear Differential Equations. Method Of Weighted Residuals As Applied To Nonlinear Differential Equations..

Analytical Solution Of The Diffusion - Convection Equation Over A Finite Domain. Analytical Solution Of The Diffusion - Convection Equation Over A Finite Domain..

Refined Theory For Flexural Motions Of Isotropic Elastic Plates. Refined Theory For Flexural Motions Of Isotropic Elastic Plates..

Mix Design, Durability And Creep Characteristics Of Sulphur Infiltrated Concrete. Mix Design, Durability And Creep Characteristics Of Sulphur Infiltrated Concrete..

Long Term Chemical Stability Of Epichlorohydrin/Bisphenol Resin Polymer Concrete. Long Term Chemical Stability Of Epichlorohydrin/Bisphenol Resin Polymer Concrete..

Parameter Testing Of Epoxy Polymer Concrete. Parameter Testing Of Epoxy Polymer Concrete..

Thick-Walled Micropolar Cylinder In A State Of Plane Strain. Thick-Walled Micropolar Cylinder In A State Of Plane Strain..

Bending Of Micropolar Plates. Bending Of Micropolar Plates.

Boussinesq Problem Of Plane Micropolar Elasticity. Boussinesq Problem Of Plane Micropolar Elasticity..

Finite Element Approach To Bending Of Micropolar Plates. Finite Element Approach To Bending Of Micropolar Plates..

On The Use Of Various Shell Theories In The Analysis Of Axisymmetrically Loaded Circular Containers. On The Use Of Various Shell Theories In The Analysis Of Axisymmetrically Loaded Circular Containers..

Drying shrinkage stresses in concrete patch repair systems. Drying shrinkage stresses in concrete patch repair systems.

Towards a canonical elastoplastic damage model. Towards a canonical elastoplastic damage model.

Comparative evaluation of plasticity theories against tension-torsion test at finite strain. Comparative evaluation of plasticity theories against tension-torsion test at finite strain.

Principal direction paths in tension-torsion test at finite strain. Principal direction paths in tension-torsion test at finite strain.

Effect Of Filler Type On The Durability Of Sulfur-Sand Composites In The Arabian Gulf Countries. Effect Of Filler Type On The Durability Of Sulfur-Sand Composites In The Arabian Gulf Countries..

Refined Theory For Isotropic Plates. Refined Theory For Isotropic Plates..

Minimum Weight Design Of Tapered Steel I-Columns. Minimum Weight Design Of Tapered Steel I-Columns..

Optimization Of Laterally Unsupported Unstiffened Steel I-Beams. Optimization Of Laterally Unsupported Unstiffened Steel I-Beams..

Modeling of shrinkage and creep stresses in concrete repair. Modeling of shrinkage and creep stresses in concrete repair.

Continuous Steel I-Girders: Optimum Proportioning. Continuous Steel I-Girders: Optimum Proportioning.

Economic Design Of Homogeneous I-Beams. Economic Design Of Homogeneous I-Beams.

CDM based finite element code for concrete in 3-D. CDM based finite element code for concrete in 3-D.

Combined experimental-numerical approach to characterization of steel-glue-concrete interface. Combined experimental-numerical approach to characterization of steel-glue-concrete interface.

Sensitivity Study Of Criteria Governing Collapse Of Centrally Loaded R/C Slabs. Sensitivity Study Of Criteria Governing Collapse Of Centrally Loaded R/C Slabs.

Chloride diffusion coefficient of concrete in the Arabian Gulf environment. Chloride diffusion coefficient of concrete in the Arabian Gulf environment.

Determination of the effective chloride diffusion coefficient in concrete via a gas diffusion technique. Determination of the effective chloride diffusion coefficient in concrete via a gas diffusion technique.

Towards A Canonical Elastoplastic Damage Model. Towards A Canonical Elastoplastic Damage Model.

Modelling of damaged RC beams strengthened by fibre composite plates. Modelling of damaged RC beams strengthened by fibre composite plates.

Durability Performance Of Repaired Reinforced Concrete Beams. Durability Performance Of Repaired Reinforced Concrete Beams.

Shear strength of plated RC beams. Shear strength of plated RC beams.

Strengthening Of Initially Loaded Reinforced Concrete Beams Using FRP Plates. Strengthening Of Initially Loaded Reinforced Concrete Beams Using FRP Plates.

Peeling and diagonal tension failures in steel plated R/C beams. Peeling and diagonal tension failures in steel plated R/C beams.

Optimum post-tensioning for three-span continuous slab-type bridge decks. Optimum post-tensioning for three-span continuous slab-type bridge decks.

Assessment and repair of distressed kiln piers in a cement manufacturing plant. Assessment and repair of distressed kiln piers in a cement manufacturing plant.

Punching Capacity Of Deck Slabs In Girder-Slab Bridges. Punching Capacity Of Deck Slabs In Girder-Slab Bridges.

Effect of holidays and surface damage to FBEC on reinforcement corrosion. Effect of holidays and surface damage to FBEC on reinforcement corrosion.

Guidelines Toward The Design Of Reinforced Concrete Beams With External Plates. Guidelines Toward The Design Of Reinforced Concrete Beams With External Plates.

Computational Model For Reinforced Concrete Beams Strengthened By Epoxy Bonded Steel Plates. Computational Model For Reinforced Concrete Beams Strengthened By Epoxy Bonded Steel Plates.

Flexural Behaviour Of Precracked Reinforced Concrete Beams Strengthened Externally By Steel Plates. Flexural Behaviour Of Precracked Reinforced Concrete Beams Strengthened Externally By Steel Plates.

A survey of commercial vehicle weights in Saudi Arabia. A survey of commercial vehicle weights in Saudi Arabia.

Optimum design of parabolic steel box arches. Optimum design of parabolic steel box arches.

Interferences in Prompt خ ³ Analysis of corrosive contaminants in concrete. Interferences in Prompt خ ³ Analysis of corrosive contaminants in concrete.

Prompt gamma analysis of chlorine in concrete for corrosion study. Prompt gamma analysis of chlorine in concrete for corrosion study.

Measurement of lime/silica ratio in concrete using PGNAA technique. Measurement of lime/silica ratio in concrete using PGNAA technique.

Effect of type and dosage of silica fume on plastic shrinkage in concrete exposed to hot weather. Effect of type and dosage of silica fume on plastic shrinkage in concrete exposed to hot weather.

Effect of silica fume on the mechanical properties of low quality coarse aggregate concrete. Effect of silica fume on the mechanical properties of low quality coarse aggregate concrete.

Effectiveness of surface coatings in improving concrete durability. Effectiveness of surface coatings in improving concrete durability.

Effectiveness of corrosion inhibitors in contaminated concrete. Effectiveness of corrosion inhibitors in contaminated concrete.

Durability of plain and blended cements in marine environments. Durability of plain and blended cements in marine environments.

Attack on plain and blended cements exposed to aggressive sulfate environments. Attack on plain and blended cements exposed to aggressive sulfate environments.

Characteristics of silica fume and its impacts on concrete in the Arabian Gulf. Characteristics of silica fume and its impacts on concrete in the Arabian Gulf.

Corrosion resistance and bond strength of epoxy-coated steel bars. Corrosion resistance and bond strength of epoxy-coated steel bars.

Plastic shrinkage cracking of concrete in hot-arid environments. Plastic shrinkage cracking of concrete in hot-arid environments.

Effect of holidays and surface damage to FBEC on reinforcement corrosion. Effect of holidays and surface damage to FBEC on reinforcement corrosion.

Effect of Thermal Variations on Bond Strength of Fusion-Bonded Epoxy-Coated Bars. Effect of Thermal Variations on Bond Strength of Fusion-Bonded Epoxy-Coated Bars.

Concrete mixture design for hot weather: Experimental and statistical analyses. Concrete mixture design for hot weather: Experimental and statistical analyses.

Sulfate Attack and Reinforcement Corrosion in Plain and Blended Cements Exposed to Sulfate Environments. Sulfate Attack and Reinforcement Corrosion in Plain and Blended Cements Exposed to Sulfate Environments.

Performance and Correlation of the Properties of Fly Ash Cement Concrete. Performance and Correlation of the Properties of Fly Ash Cement Concrete.

Performance of 15 reinforced concrete mixtures in magnesium-sodium sulphate environments. Performance of 15 reinforced concrete mixtures in magnesium-sodium sulphate environments.

Durability of reinforced concrete in aggressive sabkha environments. Durability of reinforced concrete in aggressive sabkha environments.

Electrochemical behaviour of steel in plain and blended cement concretes in sulphate and/or chloride environments. Electrochemical behaviour of steel in plain and blended cement concretes in sulphate and/or chloride environments.

Role of chloride ions on expansion and strength reduction in plain and blended cements in sulfate environments. Role of chloride ions on expansion and strength reduction in plain and blended cements in sulfate environments.

Effect of magnesium sulfate and sodium sulfate on the durability performance of plain and blended cements. Effect of magnesium sulfate and sodium sulfate on the durability performance of plain and blended cements.

Influence of sulfate ions on chloride-induced reinforcement corrosion in portland and blended cement concretes. Influence of sulfate ions on chloride-induced reinforcement corrosion in portland and blended cement concretes.

Magnesium-sodium sulfate attack in plain and blended cements. Magnesium-sodium sulfate attack in plain and blended cements.

Effect of chloride and sulfate ions on reinforcement corrosion. Effect of chloride and sulfate ions on reinforcement corrosion.

Carbonation and chloride-induced corrosion of reinforcement in fly ash concretes. Carbonation and chloride-induced corrosion of reinforcement in fly ash concretes.

Effect of superplasticizer on plastic shrinkage of plain and silica fume cement concretes. Effect of superplasticizer on plastic shrinkage of plain and silica fume cement concretes.

Elemental analysis of concrete samples using an accelerator-based PGNAA setu. Elemental analysis of concrete samples using an accelerator-based PGNAA setu.

Long-term performance of fusion-bonded epoxy-coated steel bars in chloride-contaminated concrete. Long-term performance of fusion-bonded epoxy-coated steel bars in chloride-contaminated concrete.

Elemental analysis of concrete samples using an accelerator-based PGNAA setup. Elemental analysis of concrete samples using an accelerator-based PGNAA setup.

Long-term performance of fusion-bonded epoxy-coated steel bars in chloride-contaminated concrete. Long-term performance of fusion-bonded epoxy-coated steel bars in chloride-contaminated concrete.

Effect of superplasticizer on plastic shrinkage of plain and silica fume cement concretes. Effect of superplasticizer on plastic shrinkage of plain and silica fume cement concretes.

Interferences in Prompt خ³ Analysis of corrosive contaminants in concrete. Interferences in Prompt خ³ Analysis of corrosive contaminants in concrete.

REPAIR AND RETROFITTING OF DETERIORATED REINFORCED CONCRETE STRUCTURES – THREE CASE STUDIES. The 6th Saudi Engineering Conference, KFUPM, Dhahran, December 2002.

CHARACTERISTICS OF THE ARABIAN GULF ENVIRONMENT AND ITS IMPACT ON CONCRETE DURABILITY – AN OVERVIEW. The 6th Saudi Engineering Conference, KFUPM, Dhahran, December 2002.

EFFECT OF AGGREGATE QUALITY ON THE PROPERTIES OF CONCRETE. The 6th Saudi Engineering Conference, KFUPM, Dhahran, December 2002.

Conference or Workshop Item

Behaviour Of Cfrp Strengthened Cantilever Hollow-Core Panels. In: Behaviour Of Cfrp Strengthened Cantilever Hollow-Core Panels.

Calculating Drying-Shrinkage Stresses – Readily Available Software Tools can be used for Analyses of Concrete Structures. In: Calculating Drying-Shrinkage Stresses – Readily Available Software Tools can be used for Analyses of Concrete Structures.

Finite Element Modeling of Prestressed Hollow Core Slab Strengthened with CFRP Sheets in Flexure and Shear. In: Finite Element Modeling of Prestressed Hollow Core Slab Strengthened with CFRP Sheets in Flexure and Shear.

Flexural Behavior of Precast, Prestressed Hollow-Core Concrete Slabs Strengthened by CFRP. In: Flexural Behavior of Precast, Prestressed Hollow-Core Concrete Slabs Strengthened by CFRP.

Moisture Transmissibility and Shrinkage of Water Proof Concretes. In: Moisture Transmissibility and Shrinkage of Water Proof Concretes.

Thermo-Hygral Analogue for Determination of Shrinkage Related Stresses in Concrete Structures. In: Thermo-Hygral Analogue for Determination of Shrinkage Related Stresses in Concrete Structures.

RBF METHOD FOR NAVIER STOKES EQUATIONS. In: RBF METHOD FOR NAVIER STOKES EQUATIONS.

MULTI-CRITERIA OPTIMAL DESIGN METHODOLOGY FOR DURABLE RC MEMBERS IN CORROSIVE ENVIRONMENTS –AN EXPERIMENTAL INVESTIGATION. In: MULTI-CRITERIA OPTIMAL DESIGN METHODOLOGY FOR DURABLE RC MEMBERS IN CORROSIVE ENVIRONMENTS –AN EXPERIMENTAL INVESTIGATION.

Recent developments in sulfur concrete technology. In: Recent developments in sulfur concrete technology.

A damage-propagation model for chloride-induced corrosion of reinforced concrete beams. In: 8th International Conference on Concrete in Hot and Aggressive Environments, 27-29 November 2006, Bahrain.

Recent developments in sulfur concrete technology. In: 7th International Conference and Exhibition on Chemistry in Industry (CHEMINDIX 2007), 26-28 March 2007, Bahrain.

Strategy for monitoring and repairing of concrete bridges exposed to corrosive environments. In: 3rd Gulf Conference on Roads (TGCR06), 6-8 March 2006, Muscat.

A study of permeability and tortuosity of concrete. In: 30th Conference on Our World in Concrete & Structures (OW 05), 23-24 August 2005, Singapore.

Methodology for the assessment of corrosion damage in reinforced concrete structures. In: Eighth International Conference on Concrete Engineering & Technology (CONCET 2004), 19-21 April 2004, Kuala Lumpur, Malaysia.

Improving durability of R.C. members through optimum selection of the levels of corrosion cracking factors. In: 7th International Conference on Concrete in Hot and Aggressive Environments, 13-15 October 2003, Bahrain.

Reinforcement corrosion in the Arabian Gulf and its prevention– a review. In: 7th International Conference on Concrete in Hot and Aggressive Environments, 13-15 October 2003, Bahrain.

Effect of acidic waste water on mortar and concrete. In: International Symposium on Innovative World of Concrete-98, 16-19 November, 1998, Calcutta, India.

Influence of chloride content, cover, and concrete mix parameters on post depassivation service life of chloride contaminated R.C. structures. In: International Conference on Maintenance and Durability of Concrete Structures, 4-6 March, 1997, J.N.T. University, Hyderabad, India.

Rebar corrosion risk due to free chloride under tropical conditions. In: International Conference on New Challenges for Civil Engineers of Developing Countries in the 21st Century, 29 February, 1, 2 March, 1996, New Delhi, India.

Environmental problems due to fly ash and its use as building material. In: International Conference on New Challenges for Civil Engineers of Developing Countries in the 21st Century, 29 February, 1, 2 March, 1996, New Delhi, India.

Diagnostic methods for rehabilitation of corrosion damaged R.C. structure. In: National Conference on Civil Engineering Materials and Structures, 19-21 January, 1995, Osmania University, Hyderabad, India.

Evaluation of repair materials for functional improvement of slabs and beams with corroded reinforcement. In: Proceedings of the Institution of Civil Engineers: Structures and Buildings.

Effect of cement composition on corrosion of reinforcing steel in concrete. In: From authors.

A repair strategy for corrosion damaged concrete. In: From authors.

Inhibition of atmospheric corrosion of mild steel by sodium dihydrogen orthophosphate treatment. In: Inhibition of atmospheric corrosion of mild steel by sodium dihydrogen.

Bond evaluation of environmentally conditioned GFRP/concrete systems. In: Bond evaluation of environmentally conditioned GFRP/concrete systems.

Determination of parameters for a hyperbolic model of soils. In: Determination of parameters for a hyperbolic model of soils.

A generalized three invariants cap model and its numerical implementation to study soil-foundation interaction. In: A generalized three invariants cap model and its numerical implementation to study.

Evaluation study of modified Mohr-Coulomb and cap models. In: Evaluation study of modified Mohr-Coulomb and cap models.

Assessment of concrete patch repair performance. In: Assessment of concrete patch repair performance.

Cost of solar energy generated using PV panels. In: Cost of solar energy generated using PV panels.

A repair strategy for corrosion damaged concrete. In: A repair strategy for corrosion damaged concrete.

Concrete_Durability_The_Arabiab_Gulf_Experience_Mohammed_Maslehuddin. In: Concrete_Durability_The_Arabiab_Gulf_Experience_Mohammed_Maslehuddin.

Performance_of_Concrete_in_Aggressive_Environments. In: Performance_of_Concrete_in_Aggressive_Environments.

Influence_of_Arabian_Gulf_Environment_oc_Durability_of_reinforced_concrete_A_Al-Rabiah_Saudi_COWI-Consult_and_Partner. In: Influence_of_Arabian_Gulf_Environment_oc_Durability_of_reinforced_concrete_A_Al-Rabiah_Saudi_COWI-Consult_and_Partner.

Fatigue behavior of reinforced concrete beams strengthened with CFRP strips. In: Fatigue behavior of reinforced concrete beams strengthened with CFRP strips.

Comparative evaluation of plasticity theories against tension-torsion test at finite strain. In: Comparative evaluation of plasticity theories against tension-torsion test at finite strain.

Analysis of radially tapered circular plate sectors by finite difference. In: Analysis of radially tapered circular plate sectors by finite difference.

FATIGUE CRACK PROPAGATION IN PLAIN CONCRETE. In: FATIGUE CRACK PROPAGATION IN PLAIN CONCRETE..

FRACTURE CHARACTERIZATION OF REINFORCED CONCRETE BEAMS. In: FRACTURE CHARACTERIZATION OF REINFORCED CONCRETE BEAMS..

Computational chemo-damage modelling for assessment of concrete patch repair durability. In: Computational chemo-damage modelling for assessment of concrete patch repair durability.

Long-term monitoring of FBEC steel bars corrosion in chloride-contaminated concrete. In: Long-term monitoring of FBEC steel bars corrosion in chloride-contaminated concrete.

Plastic shrinkage cracking of blended cement concretes in hot environments. In: Plastic shrinkage cracking of blended cement concretes in hot environments.

Influence of chloride ions on sulphate deterioration in plain and blended cements. In: Influence of chloride ions on sulphate deterioration in plain and blended cements.

Monograph

A study of the size-effect of corroded reinforced concrete beams in prediction of residual strength. Project Report. KFUPM.

Formulating supplementary compliance criteria for locally produced concrete. Project Report. KFUPM.

A study of self-compacting concrete using local marginal aggregates. Project Report. KFUPM.

Study on PVC pipe products and causes of failures. Project Report. KFUPM.

Establishing quality compliance criteria for concrete in Eastern Saudi Arabia. Project Report. KFUPM.

A study of the relationship between permeability and tortuosity of concrete. Project Report. KFUPM.

Prediction of residual strength of corrosion-damaged reinforced concrete beams. Project Report. KFUPM.

Evaluation of sulfur concrete technology for local applications. Project Report. KFUPM.

This list was generated on Sat Oct 5 12:23:51 2024 +03.