Thesis

(2005) Calibration of VISSIM to the traffic conditions of Khobar and Dammam, Saudi Arabia. Masters thesis, King Fahd University of Petroleum and Minerals.

(2004) Studies on soil-foundation interaction in the Sabkha environment of Eastern Saudi Arabia. Masters thesis, King Fahd University of Petroleum and Minerals.

(2005) A prediction model for the residual flexural strength of corroded reinforced concrete beams. Masters thesis, King Fahd University of Petroleum and Minerals.

(2005) Effect of rate of water table rise on LNAPL entrapment in uniform and well-graded sands. Masters thesis, King Fahd University of Petroleum and Minerals.

(2004) Combined electrooxidation and electrocoagulation processes for the treatment of municipal wastewater. Masters thesis, King Fahd University of Petroleum and Minerals.

(2005) Improving the performance of damaged FBECR in chloride-contaminated concrete. Masters thesis, King Fahd University of Petroleum and Minerals.

(2004) Treatment of refinery wastewater using crossflow membrane bioreactor (CF-MBR). Masters thesis, King Fahd University of Petroleum and Minerals.

(2005) Assessment of the relationship between the spilled LNAPL volume and its thickness in monitoring wells considering the water table fluctuation history. PhD thesis, King Fahd University of Petroleum and Minerals.

(1993) Non-linear finite element analysis of reinforced concrete beams repaired by plate bonding. PhD thesis, King Fahd University of Petroleum and Minerals.

(1989) Status of hydrological network in south-western region of the Kingdom of Saudi Arabia. Masters thesis, King Fahd University of Petroleum and Minerals.

(2003) Influence of temperature and wind on moisture transport in cementitious materials. Masters thesis, King Fahd University of Petroleum and Minerals.

(1990) Performance of slow sand filters in treating secondary effluent using different sizes of local sand. Masters thesis, King Fahd University of Petroleum and Minerals.

(1996) Plastic shrinkage cracking in hot weather conditions. Masters thesis, King Fahd University of Petroleum and Minerals.

(1992) Nonlinear behavior of cylinder-plate junction on tensionless elastic subgrade. Masters thesis, King Fahd University of Petroleum and Minerals.

(2002) Treatment of water contaminated with dimethyl phthalate by Fenton, Photo-Fenton and UV/H₂O₂ processes. PhD thesis, King Fahd University of Petroleum and Minerals.

(1995) Canonical elastoplastic - damage modelling of reinforced concrete. PhD thesis, King Fahd University of Petroleum and Minerals.

(2003) Risk and hydraulic reliability analysis of water distribution systems. Masters thesis, King Fahd University of Petroleum and Minerals.

(1994) The effects of mode perceptions on intercity mode-choice behavior in Saudi Arabia. PhD thesis, King Fahd University of Petroleum and Minerals.

(1997) Relationship between the noncompliance behavior at signalized intersection an driver characteristics. Masters thesis, King Fahd University of Petroleum and Minerals.

(2000) The Interaction between soil and buried bent pipelines. Masters thesis, King Fahd University of Petroleum and Minerals.

(2000) Effects of geotextiles on the load-carrying capacity of pavements on Sabkha. Masters thesis, King Fahd University of Petroleum and Minerals.

(1993) Evaluation of Dammam carrousel treatment plant for nitrogen removal. Masters thesis, King Fahd University of Petroleum and Minerals.

(1995) Impact of process variables on nutrient removal in slow sand filters. Masters thesis, King Fahd University of Petroleum and Minerals.

(1998) Multiobjective water resources planning under demand, supply and quality uncertainties. Masters thesis, King Fahd University of Petroleum and Minerals.

(1997) Performance evaluation of slow sand filters: a probabilistic approach. Masters thesis, King Fahd University of Petroleum and Minerals.

(1997) Modeling of pavement condition and maintenance priority ranking for road networks. PhD thesis, King Fahd University of Petroleum and Minerals.

(1994) Numerical simulation of groundwater depletion in Al-Hasa area. Masters thesis, King Fahd University of Petroleum and Minerals.

(1997) A Study on the development of vehicular loding for design of highway bridges in Saudi Arabia. Masters thesis, King Fahd University of Petroleum and Minerals.

(1994) The effect of signal coordination on interesection safety. PhD thesis, King Fahd University of Petroleum and Minerals.

(1997) Optimization of parabolic steel box arches. Masters thesis, King Fahd University of Petroleum and Minerals.

(1989) A generalized theory for bending of thick isotropic rectangular plates. PhD thesis, King Fahd University of Petroleum and Minerals.

(1995) Elasto-plastic collapse load analysis of single mitred bends. Masters thesis, King Fahd University of Petroleum and Minerals.

(2001) Effect of gradation and testing procedures on the load carrying capacity of calcareous sediments. Masters thesis, King Fahd University of Petroleum and Minerals.

(1995) A groundwater velocity and dissolved oxygen on bioremediation of gasoline-contaminated sandy aquifers. PhD thesis, King Fahd University of Petroleum and Minerals.

(1989) Characterization and treatment of a petrochemical wastewater for reuse. Masters thesis, King Fahd University of Petroleum and Minerals.

(1995) Use of small diameter cores in evaluation of in-situ concrete strength in Eastern Saudi Arabia. Masters thesis, King Fahd University of Petroleum and Minerals.

(2000) Behavior of laterally loaded pile group model in sand. Masters thesis, King Fahd University of Petroleum and Minerals.

(1998) Quality changes of secondary effluent as it passes through amended sand column. Masters thesis, King Fahd University of Petroleum and Minerals.

(1994) Chloride diffusion in concrete/prediction of the onset of corrosion in reinforced concrete structures. Masters thesis, King Fahd University of Petroleum and Minerals.

(2002) Performance modification of Saudi-asphalt binders using SABIC polymers. Masters thesis, King Fahd University of Petroleum and Minerals.

(1991) Reliability studies of multireservoir system using stochastic approach. Masters thesis, King Fahd University of Petroleum and Minerals.

(1996) Protection of reinforced concrete using corrosion inhibitors and coatings. Masters thesis, King Fahd University of Petroleum and Minerals.

(1989) Pedestrian behavior related to accident involvement. Masters thesis, King Fahd University of Petroleum and Minerals.

(1997) Fate of secondary effluent flow through porous media. Masters thesis, King Fahd University of Petroleum and Minerals.

(1998) Performance optimization and modeling of slurry seal and micro surfacing utilizing steel slag aggregates. Masters thesis, King Fahd University of Petroleum and Minerals.

(1994) Three dimensional finite element analysis of brittle materials using CDM model. Masters thesis, King Fahd University of Petroleum and Minerals.

(1991) Treatise on solute transport in porous media and its modeling for centration-dependent permeability. PhD thesis, King Fahd University of Petroleum and Minerals.

(1995) Removal of coliphage and bacteria through slow sand filtration. Masters thesis, King Fahd University of Petroleum and Minerals.

(1996) Proposed methodology for designing the signal change interval. Masters thesis, King Fahd University of Petroleum and Minerals.

(1995) Boundary element analysis of nonprismatic beams and plates. Masters thesis, King Fahd University of Petroleum and Minerals.

(1993) The effect of temperature and salt contamination on corrosion of reinforcing steel in OPC and blended cement concretes. Masters thesis, King Fahd University of Petroleum and Minerals.

(1989) Performance of Epoxy-injected concrete in hot weather conditions. Masters thesis, King Fahd University of Petroleum and Minerals.

(2000) Performance evaluation of concrete coatings. Masters thesis, King Fahd University of Petroleum and Minerals.

(1997) Predicting short-duration, high-intensity rainfall in Saudi Arabia. Masters thesis, King Fahd University of Petroleum and Minerals.

(1998) Fracture toughness investigation of an indigenous limestone rock formation. Masters thesis, King Fahd University of Petroleum and Minerals.

(1989) Load induced cracking and failure of concrete deck slabs in girder-slab type bridges. Masters thesis, King Fahd University of Petroleum and Minerals.

(2003) Study of reaction kinetics of a submerged membrane activated sludge process. PhD thesis, King Fahd University of Petroleum and Minerals.

(1997) Validation and improvement of rear-end traffic conflict model for safety evaluation of coordinated signal systems. Masters thesis, King Fahd University of Petroleum and Minerals.

(1997) Removal of microorganisms through slow sand filtration of chlorinated vs. nonchlorinated secondary effluents. Masters thesis, King Fahd University of Petroleum and Minerals.

(1989) Use of microtubes in the design of optimized trickle irrigation network. Masters thesis, King Fahd University of Petroleum and Minerals.

(1996) Performance evaluation of concrete surface treatment materials. Masters thesis, King Fahd University of Petroleum and Minerals.

(1991) Mechanisms of high durability performance of plain and blended cements. PhD thesis, King Fahd University of Petroleum and Minerals.

(1989) Investigation of leachate from a sanitary landfill in Saudi Arabia. Masters thesis, King Fahd University of Petroleum and Minerals.

(1992) Flexure and shear behaviour of damaged RC beams repaired by plate bonding. Masters thesis, King Fahd University of Petroleum and Minerals.

(1992) Optimal design of reinforced concrete frames. Masters thesis, King Fahd University of Petroleum and Minerals.

(1992) Biological treatment of hazardous contaminants in sequencing batch reacors. Masters thesis, King Fahd University of Petroleum and Minerals.

(2002) Evaluation of load transfer in axially loaded repaired concrete columns. Masters thesis, King Fahd University of Petroleum and Minerals.

(1991) Characerization of expansive soils in the Eastern Province of Saudi Arabia. Masters thesis, King Fahd University of Petroleum and Minerals.

(1998) Assesment of the geotechnical properties of stabilized sand-marl mixtures for constructional purposes. Masters thesis, King Fahd University of Petroleum and Minerals.

(1988) Study of various repair methods for reinforced concrete flexural members. Masters thesis, King Fahd University of Petroleum and Minerals.

(1992) Strengthening of damaged reinforced concrete beams by external fiber glass plates. Masters thesis, King Fahd University of Petroleum and Minerals.

(1988) Geotechnical properties of the surfacial soil of Sana'a The Yemen Arab Republic. Masters thesis, King Fahd University of Petroleum and Minerals.

(1985) Concrete mix design for hot weather. Masters thesis, King Fahd University of Petroleum and Minerals.

(1982) The Influence function technique in the numerical analysis of plate bending of arbitrary plan form. Masters thesis, King Fahd University of Petroleum and Minerals.

(1993) Experimental investigation of microbial growth in subsurface environment. Masters thesis, King Fahd University of Petroleum and Minerals.

(2000) Iterative coupling of boundary and finite element methods. PhD thesis, King Fahd University of Petroleum and Minerals.

(1995) Bond and durability of fusion-bonded epoxy-coated steel bars. Masters thesis, King Fahd University of Petroleum and Minerals.

(1996) Polymer modification of Arab Asphalt to Suit Gulf Countries' performance requirements. PhD thesis, King Fahd University of Petroleum and Minerals.

(1990) Durability of reinforced concrete beams repaired with various repair materials. Masters thesis, King Fahd University of Petroleum and Minerals.

(1990) Studying the behavior of Dhahran dune sand using the 3rd invariant stress dependent combined hardening cap model. Masters thesis, King Fahd University of Petroleum and Minerals.

(1998) Elastic plastic analysis of semi-rigid industrial frames. PhD thesis, King Fahd University of Petroleum and Minerals.

(1990) Assessment of concrete strength by lok and capo tests. Masters thesis, King Fahd University of Petroleum and Minerals.

(1996) Numerical modeling of RC slabs on tensionless elastic subgrade. Masters thesis, King Fahd University of Petroleum and Minerals.

(2000) Analysis and design of buried pipelines. Masters thesis, King Fahd University of Petroleum and Minerals.

(1997) Quantifying crude oil spill volume in homogeneous and layered porous media from product thickness in monitoring wells. Masters thesis, King Fahd University of Petroleum and Minerals.

(1995) Laboratory evaluation of hedmanite and lime modified asphalt concrete mixes. Masters thesis, King Fahd University of Petroleum and Minerals.

(2000) Analysis of laminated general shells undergoing finite rotations and large motion. PhD thesis, King Fahd University of Petroleum and Minerals.

(2005) A prediction model for the residual flexural strength of corroded reinforced concrete beams. Masters thesis, King Fahd University of Petroleum and Minerals.

(1996) Chemical stabilization of Al-Qurrayyah Eastern Saudi Sabkha soil. Masters thesis, King Fahd University of Petroleum and Minerals.

(1996) Unsteady hydrodynamic forces on spheroidal bodies. PhD thesis, King Fahd University of Petroleum and Minerals.

(1992) Numerical simulation of groundwater in the Umm Er Radhuma Aquifer at Shadco project - Eastern Province. Masters thesis, King Fahd University of Petroleum and Minerals.

(2003) The Production of activated carbon from local palm-date pits for pollution removal process. Masters thesis, King Fahd University of Petroleum and Minerals.

(1995) Prediction of shear/peeling failure in plated R/C beams. Masters thesis, King Fahd University of Petroleum and Minerals.

(1995) Evaluation of thermal resistivity of soils in Saudi Arabia. Masters thesis, King Fahd University of Petroleum and Minerals.

(1996) Performance modeling of Arabian asphalt using HP-GPC chromatography. PhD thesis, King Fahd University of Petroleum and Minerals.

(1995) Computational Modelling of shrinkage in repaired concrete. Masters thesis, King Fahd University of Petroleum and Minerals.

(2003) Effects of aggregate quality on reinforcement corrosion. Masters thesis, King Fahd University of Petroleum and Minerals.

(1982) A Study of development and performance of sulphur-based construction blocks. Masters thesis, King Fahd University of Petroleum and Minerals.

(1987) Development of guidelines for four phase traffic signal scheme in the Kingdom of Saudi Arabia. Masters thesis, King Fahd University of Petroleum and Minerals.

(1985) Static strength properties of artificially cemented sands. Masters thesis, King Fahd University of Petroleum and Minerals.

(2004) Studies on soil-foundation interaction in the Sabkha environment of Eastern Saudi Arabia. Masters thesis, King Fahd University of Petroleum and Minerals.

(1996) Effects of oily sludge landforming on the soils environment. Masters thesis, King Fahd University of Petroleum and Minerals.

(1988) Dispersion of chloroform in a saturated porous media. Masters thesis, King Fahd University of Petroleum and Minerals.

(1980) A Three-dimensional photoelastic investigation of the stress distribution in the anchorage zone of post-tensioned beams. Masters thesis, King Fahd University of Petroleum and Minerals.

(1996) The effect of casting and curing temperatures on the properties of concrete. Masters thesis, King Fahd University of Petroleum and Minerals.

(1995) Effect of captive riders in intercity mode-choice modeling. Masters thesis, King Fahd University of Petroleum and Minerals.

(1992) Studies on soil-foundation interaction in the sabkha environment of Eastern Province of Saudi Arabia. PhD thesis, King Fahd University of Petroleum and Minerals.

(1985) Studies on the evaluation of permeability and corrosion resisting characteristics of Portland pozzolan concrete. Masters thesis, King Fahd University of Petroleum and Minerals.

(1995) Characterization and stabilization of Eastern Saudi Marls. Masters thesis, King Fahd University of Petroleum and Minerals.

(2002) Development of an equivalent dispersion coefficient for a complex contaminant transport model. Masters thesis, King Fahd University of Petroleum and Minerals.

(2005) Calibration of VISSIM to the traffic conditions of Khobar and Dammam, Saudi Arabia. Masters thesis, King Fahd University of Petroleum and Minerals.

(1987) Tertiary wastewater treatment by sedimantation and sand filtration. Masters thesis, King Fahd University of Petroleum and Minerals.

(1988) Engineering properties and mineralogical composition of expansive clays in Al-Qatif area (K.S.A). Masters thesis, King Fahd University of Petroleum and Minerals.

(1999) Interface frictional characteristics of non-woven geotextile - Sabkha and - sand using pull-out tests. Masters thesis, King Fahd University of Petroleum and Minerals.

(1993) Modeling of biological wastewater treatment in sequencing batch reactors. Masters thesis, King Fahd University of Petroleum and Minerals.

(1991) Criteria for cathodic protection of steel in concrete in the context of Arabian Gulf environment. PhD thesis, King Fahd University of Petroleum and Minerals.

(1979) Biparabolic isoparametric shell element : (a version of Ahmad element). Masters thesis, King Fahd University of Petroleum and Minerals.

(2005) A study of mix design and durability of self compacting concrete. Masters thesis, King Fahd University of Petroleum and Minerals.

(1978) Optimization of Concrete strength using local aggregates from the Eastern Province of Saudi Arabia. Masters thesis, King Fahd University of Petroleum and Minerals.

(2000) An Investigation of corrosion of steel reinforcement in concrete in the Eastern Province of Saudi Arabia. Masters thesis, King Fahd University of Petroleum and Minerals.

(1993) Effect of dissolved oxygen on activated carbon uptake. PhD thesis, King Fahd University of Petroleum and Minerals.

(1987) Removal of iron and manganese with ozone. Masters thesis, King Fahd University of Petroleum and Minerals.

(1988) Parking problem of Arafat. Masters thesis, King Fahd University of Petroleum and Minerals.

(1992) Effect of dissolved oxygen on the adsorptive capacity of a granular activated charcoal for phenol and O-Cresol. Masters thesis, King Fahd University of Petroleum and Minerals.

(1982) Electrical resistivity of concrete in relation to corrosion of reinforcement. Masters thesis, King Fahd University of Petroleum and Minerals.

(1988) Analysis of horizontally curved pseudo slab type bridge deck continuous over discrete pier supports. Masters thesis, King Fahd University of Petroleum and Minerals.

(1989) Tertiary treatment of municipal sewage via slow sand filtration. Masters thesis, King Fahd University of Petroleum and Minerals.

(1987) Effect of sight distance on the safety of unsignalized intersections. Masters thesis, King Fahd University of Petroleum and Minerals.

(1985) Recycling of deteriorated asphalt pavements. Masters thesis, King Fahd University of Petroleum and Minerals.

(1997) Developing behavioral models for driver gap acceptance at priority intersections. PhD thesis, King Fahd University of Petroleum and Minerals.

(1982) Buckling of multiple braced columns. Masters thesis, King Fahd University of Petroleum and Minerals.

(2002) Plastic shrinkage cracking of blended cement concretes under hot weather conditions. Masters thesis, King Fahd University of Petroleum and Minerals.

(1991) Non-linear finite element modelling of reinforced concrete slabs. PhD thesis, King Fahd University of Petroleum and Minerals.

(1988) Fracture and permeability characteristics of thermally degraded concrete. Masters thesis, King Fahd University of Petroleum and Minerals.

(2003) Causes of female teacher work trip accidents in the Kingdom of Saudi Arabia. Masters thesis, King Fahd University of Petroleum and Minerals.

(1981) The effects of baghouse fines and mineral fillers on asphalt mix properties in the Eastern Province of Saudi Arabia. Masters thesis, King Fahd University of Petroleum and Minerals.

(0007) Progressive fracture of reinforced deck slab in girder-slab type bridge deck. Masters thesis, King Fahd University of Petroleum and Minerals.

(1997) Microbial evaluation of Al-Khobar wastewater treatment plants. Masters thesis, King Fahd University of Petroleum and Minerals.

(1998) Continuum damage model for compressive fatigue of high strength concrete. Masters thesis, King Fahd University of Petroleum and Minerals.

(1996) Plastic shrinkage cracking in hot weather conditions. Masters thesis, KFUPM.

(1986) Progressive fracture of reinforced deck slab in girder-slab type bridge deck. Masters thesis, KFUPM.

(1996) Protection of reinforced concrete using corrosion inhibitors and coatings. Masters thesis, KFUPM.

(1992) Strengthening of damaged reinforced concrete beams by external fiber glass plates. Masters thesis, KFUPM.

(1985) Studies on the evaluation of permeability and corrosion resisting characteristics of Portland pozzolan concrete. Masters thesis, KFUPM.

(1988) Study of various repair methods for reinforced concrete flexural members. Masters thesis, KFUPM.

(1996) The effect of casting and curing temperatures on the properties of concrete. Masters thesis, KFUPM.

(1993) The effect of temperature and salt contamination on corrosion of reinforcing steel in OPC and blended cement concretes. Masters thesis, KFUPM.

(1982) The Influence function technique in the numerical analysis of plate bending of arbitrary plan form. Masters thesis, KFUPM.

(1994) Three dimensional finite element analysis of brittle materials using CDM model. Masters thesis, KFUPM.

(1995) Use of small diameter cores in evaluation of in-situ concrete strength in Eastern Saudi Arabia. Masters thesis, KFUPM.

(2002) Plastic shrinkage cracking of blended cement concretes under hot weather conditions. Masters thesis, KFUPM.

(1995) Prediction of shear/peeling failure in plated R/C beams. Masters thesis, KFUPM.

(1995) Optimization of continuous post-tensioned bridge decks of prescribed lengths. Masters thesis, KFUPM.

(1991) Optimum design of continuous partially prestressed concrete beams. Masters thesis, KFUPM.

(2007) Optimum design of mat foundation. Masters thesis, KFUPM.

(1982) Performance of pozzolan cement concrete in a high chloride-sulphate environment. Masters thesis, KFUPM.

(2005) RBF-based meshless method for the analysis of thin elastic plates undergoing large deflections. Masters thesis, KFUPM.

(1994) Reduction in bond and the strength of slabs due to corrosion of reinforcement. Masters thesis, KFUPM.

(1982) Stability analysis of orthotropic plates by a mixed complementary energy method. Masters thesis, KFUPM.

(1985) Static analysis of horizontally curved bridge decks supported by flexible multi-girders. Masters thesis, KFUPM.

(1975) Strain survey on a small plate with a circular hole in the center. Masters thesis, KFUPM.

(1984) Strength of reinforced concrete beams in hot weather. Masters thesis, KFUPM.

(1988) Study of the effect of rust and corrosion of reinforcement on bond behavior. Masters thesis, KFUPM.

(1988) Study of the effect of rust and corrosion of reinforcemnt on bond behaviour. Masters thesis, KFUPM.

(1996) Numerical modeling of RC slabs on tensionless elastic subgrade. Masters thesis, KFUPM.

(1992) Optimal design of reinforced concrete frames. Masters thesis, KFUPM.

(1978) Optimization of Concrete strength using local aggregates from the Eastern Province of Saudi Arabia. Masters thesis, KFUPM.

(1997) Optimization of parabolic steel box arches. Masters thesis, KFUPM.

(2000) Performance evaluation of concrete coatings. Masters thesis, KFUPM.

(1996) Performance evaluation of concrete surface treatment materials. Masters thesis, KFUPM.

(1989) Performance of Epoxy-injected concrete in hot weather conditions. Masters thesis, KFUPM.

(1998) Performance optimization and modeling of slurry seal and micro surfacing utilizing steel slag aggregates. Masters thesis, KFUPM.

(1989) Load induced cracking and failure of concrete deck slabs in girder-slab type bridges. Masters thesis, KFUPM.

(1992) Nonlinear behavior of cylinder-plate junction on tensionless elastic subgrade. Masters thesis, KFUPM.

(2003) Influence of temperature and wind on moisture transport in cementitious materials. Masters thesis, KFUPM.

(2002) Evaluation of load transfer in axially loaded repaired concrete columns. Masters thesis, KFUPM.

(1992) Flexure and shear behaviour of damaged RC beams repaired by plate bonding. Masters thesis, KFUPM.

(1988) Fracture and permeability characteristics of thermally degraded concrete. Masters thesis, KFUPM.

(2005) Improving the performance of damaged FBECR in chloride-contaminated concrete. Masters thesis, KFUPM.

(1982) Electrical resistivity of concrete in relation to corrosion of reinforcement. Masters thesis, KFUPM.

(1995) Elasto-plastic collapse load analysis of single mitred bends. Masters thesis, KFUPM.

(2003) Effects of aggregate quality on reinforcement corrosion. Masters thesis, KFUPM.

(1990) Durability of reinforced concrete beams repaired with various repair materials. Masters thesis, KFUPM.

(1998) Continuum damage model for compressive fatigue of high strength concrete. Masters thesis, KFUPM.

(1985) Concrete mix design for hot weather. Masters thesis, KFUPM.

(1983) Sulfur infiltrated concrete box sections with poly styrene core as panel units. Masters thesis, KFUPM.

(1989) Use of latex modified concrete as a bridge deck overlay. Masters thesis, KFUPM.

(2005) A prediction model for the residual flexural strength of corroded reinforced concrete beams. Masters thesis, KFUPM.

(1982) A Study of development and performance of sulphur-based construction blocks. Masters thesis, KFUPM.

(2005) A study of mix design and durability of self compacting concrete. PhD thesis, KFUPM.

(1980) A Three-dimensional photoelastic investigation of the stress distribution in the anchorage zone of post-tensioned beams. Masters thesis, KFUPM.

(1981) An Investigation of corrosion of steel reinforcement in concrete in the Eastern Province of Saudi Arabia. Masters thesis, KFUPM.

(1995) Computational Modelling of shrinkage in repaired concrete. Masters thesis, KFUPM.

(2000) Analysis and design of buried pipelines. Masters thesis, KFUPM.

(1988) Analysis of horizontally curved pseudo slab type bridge deck continuous over discrete pier supports. Masters thesis, KFUPM.

(1990) Assessment of concrete strength by lok and capo tests. Masters thesis, KFUPM.

(1995) Bond and durability of fusion-bonded epoxy-coated steel bars. Masters thesis, KFUPM.

(1995) Boundary element analysis of nonprismatic beams and plates. Masters thesis, KFUPM.

(1982) Buckling of multiple braced columns. Masters thesis, KFUPM.

(1994) Chloride diffusion in concrete/prediction of the onset of corrosion in reinforced concrete structures. Masters thesis, KFUPM.

(1987) A model study of slurry-trench excavation and soil-bentonite cut-off walls. Masters thesis, KFUPM.

(1985) Deformation of cohesionless soils under repeated loading. Masters thesis, KFUPM.

(1988) Constitutive modelling of Dhahran dune sand using cap model. Masters thesis, kfupm.

(1987) Creep characteristics of local sands. Masters thesis, KFUPM.

(1997) Effect of gypsum-anhydrite on the behavior of expansive clays. Masters thesis, KFUPM.

(1997) Improvement of Eastern Saudi sabkha soils for road construction. Masters thesis, KFUPM.

(1997) Improvement of Eastern Saudi sabkha soils for road construction. Masters thesis, KFUPM.

(2001) Plasto-damage model for stress-strain behavior of soil. Masters thesis, KFUPM.

(1992) Studies on soil-foundation interaction in the sabkha environment of Eastern Province of Saudi Arabia. PhD thesis, KFUPM.

(2000) The Interaction between soil and buried bent pipelines. Masters thesis, KFUPM.

(1990) Studying the behavior of Dhahran dune sand using the 3rd invariant stress dependent combined hardening cap model. Masters thesis, KFUPM.

(1998) Assesment of the geotechnical properties of stabilized sand-marl mixtures for constructional purposes. Masters thesis, KFUPM.

(2000) Behavior of laterally loaded pile group model in sand. Masters thesis, KFUPM.

(2005) Pullout capacity of block anchor in sand. Masters thesis, KFUPM.

(1988) Study of laterally loaded single pile model. Masters thesis, KFUPM.

(1995) Evaluation of thermal resistivity of soils in Saudi Arabia. Masters thesis, KFUPM.

(2001) Effect of gradation and testing procedures on the load carrying capacity of calcareous sediments. Masters thesis, KFUPM.

(1988) Geotechnical properties of the surfacial soil of Sanaa The Yemen Arab Republic. Masters thesis, KFUPM.

(1979) Uncertainty analysis in shear strength of soils and its application to stability of slope problems. Masters thesis, KFUPM.

(1998) Fracture toughness investigation of an indigenous limestone rock formation. Masters thesis, KFUPM.

(1991) Characerization of expansive soils in the Eastern Province of Saudi Arabia. Masters thesis, KFUPM.

(1995) Characterization and stabilization of Eastern Saudi Marls. Masters thesis, KFUPM.

(1997) Chemical stabilization of Al-Qurrayyah Eastern Saudi Sabkha soil. Masters thesis, KFUPM.

(1994) Swelling potential and treatment of expansive soil. Masters thesis, KFUPM.

(1999) Interface frictional characteristics of non-woven geotextile - Sabkha and - sand using pull-out tests. Masters thesis, KFUPM.

(1987) The assessment of degree of cementation in weakly to moderately cemented sands by the static cone penetrometer. Masters thesis, KFUPM.

(2004) Studies on soil-foundation interaction in the Sabkha environment of Eastern Saudi Arabia. Masters thesis, KFUPM.

(1982) Drivers' attitudes and their relationship to accident involvement in Saudi Arabia. Masters thesis, KFUPM.

(1985) Static strength properties of artificially cemented sands. Masters thesis, KFUPM.

(2005) Effect of rate of water table rise on LNAPL entrapment in uniform and well-graded sands. Masters thesis, KFUPM.

(1986) Assessment of road user charges in Saudi Arabia. Masters thesis, KFUPM.

(2000) Effects of geotextiles on the load-carrying capacity of pavements on Sabkha. Masters thesis, KFUPM.

(1988) Engineering properties and mineralogical composition of expansive clays in Al-Qatif area. Masters thesis, KFUPM.

(1988) Effect of degree of saturation, air voids and medium of attack on the durability of asphalt concrete mixes in Jeddah. Masters thesis, KFUPM.

(1986) Axle loads and pavement performance indicators for typical highways in Eastern Province. Masters thesis, KFUPM.

(2002) Characteristic study of catastrophic tire failure in Eastern Province of Saudi Arabia. Masters thesis, KFUPM.

(1985) Development of an effective patrol dispatching system for traffic police operations. Masters thesis, KFUPM.

(1987) Development of left-turn lane warrants for Saudi Arabia. Masters thesis, KFUPM.

(1989) Effect of using geotextiles on behavior of Sabkaha subgrades. Masters thesis, KFUPM.

(1985) Effect of vehicle dimensional characteristics on highway geometric design. Masters thesis, KFUPM.

(1985) Estimating the parking demand for mosques. Masters thesis, KFUPM.

(2007) Evaluating adequacy of traffic optimization models under local traffic conditions. Masters thesis, KFUPM.

(1990) Laboratory evaluation of reclaimed rubber-asphaltic concrete mixes. Masters thesis, KFUPM.

(1986) Evaluation of emulsified asphalt treated sand for road bases. Masters thesis, KFUPM.

(1997) Optimization of steel slag aggregates for bituminous mixes in Saudi Arabia. Masters thesis, KFUPM.

(1988) Prediction of pavement rutting from laboratory characterization tests. Masters thesis, KFUPM.

(1988) Evaluation of slurry seal performance in the Eastern Province of Saudi Arabia. Masters thesis, KFUPM.

(1982) Improving water resistance of asphalt concrete in Saudi Arabia. Masters thesis, KFUPM.

(1988) Laboratory evaluation of local asphalt concrete mix design procedures. Masters thesis, KFUPM.

(1989) Road traffic noise in developing countries. Masters thesis, KFUPM.

(1984) Static and dynamic triaxial tests on sulphur-asphalt-sand mixes. Masters thesis, KFUPM.

(1985) Strength of asphalt emulsion treated marl for road bases. Masters thesis, KFUPM.

(1985) Structural evaluation of in-service asphalt pavements by deflection measurements. Masters thesis, KFUPM.

(1983) Validity and use of traffic conflict technique : a study in the Kingdom of Saudi Arabia. Masters thesis, KFUPM.

(1997) A Study on the development of vehicular loding for design of highway bridges in Saudi Arabia. Masters thesis, KFUPM.

(2005) Calibration of VISSIM to the traffic conditions of Khobar and Dammam, Saudi Arabia. Masters thesis, KFUPM.

(2003) Causes of female teacher work trip accidents in the Kingdom of Saudi Arabia. Masters thesis, KFUPM.

(1987) Development of guidelines for four phase traffic signal scheme in the Kingdom of Saudi Arabia. Masters thesis, KFUPM.

(1995) Effect of captive riders in intercity mode-choice modeling. Masters thesis, KFUPM.

(1995) Laboratory evaluation of hedmanite and lime modified asphalt concrete mixes. Masters thesis, KFUPM.

(1987) Effect of sight distance on the safety of unsignalized intersections. Masters thesis, KFUPM.

(1988) Parking problem of Arafat. Masters thesis, KFUPM.

(2002) Performance modification of Saudi-asphalt binders using SABIC polymers. Masters thesis, KFUPM.

(1989) Pedestrian behavior related to accident involvement. Masters thesis, KFUPM.

(1981) The effects of baghouse fines and mineral fillers on asphalt mix properties in the Eastern Province of Saudi Arabia. Masters thesis, KFUPM.

(1997) Performance evaluation of slow sand filters: a probabilistic approach. Masters thesis, KFUPM.

(1997) Validation and improvement of rear-end traffic conflict model for safety evaluation of coordinated signal systems. Masters thesis, KFUPM.

(1996) Proposed methodology for designing the signal change interval. Masters thesis, KFUPM.

(1985) Recycling of deteriorated asphalt pavements. Masters thesis, KFUPM.

(1997) Relationship between the noncompliance behavior at signalized intersection an driver characteristics. Masters thesis, KFUPM.

(1997) Developing behavioral models for driver gap acceptance at priority intersections. PhD thesis, KFUPM.

(1997) Modeling of pavement condition and maintenance priority ranking for road networks. PhD thesis, KFUPM.

(1996) Performance modeling of Arabian asphalt using HP-GPC chromatography. PhD thesis, KFUPM.

(1996) Polymer modification of Arab Asphalt to Suit Gulf Countries' performance requirements. PhD thesis, KFUPM.

(1994) The effect of signal coordination on interesection safety. PhD thesis, KFUPM.

(1994) The effects of mode perceptions on intercity mode-choice behavior in Saudi Arabia. PhD thesis, KFUPM.

(1999) Analysis of static and dynamic characteristics of twin-cell steel box girders. Masters thesis, KFUPM.

(1980) Application of modified Reissner theory to sandwich plates. Masters thesis, KFUPM.

(1979) Approximate techniques towards solutions of Reissner plates. Masters thesis, KFUPM.

(1981) Computation of lateral-torsional buckling loads for nonprismatic beam-columns. Masters thesis, KFUPM.

(2005) Compliance criteria for quality concrete. Masters thesis, KFUPM.

(1985) Corrosion of reinforcing steel in sulphur concrete. Masters thesis, KFUPM.

(1983) Influence of transverse normal strain on finite, simply supported isotropic and orthotropic plates. Masters thesis, KFUPM.

(1978) Investigation into the modulus of elasticity of concrete. Masters thesis, KFUPM.

(1982) Optimization of concrete mix design using a statistical approach. Masters thesis, KFUPM.

(2006) Moisture transport and shrinkage in new generation concretes. Masters thesis, KFUPM.

(1987) Nonlinear finite element analysis of ferrocement beams. Masters thesis, KFUPM.

(1984) Material and fracture characterization of sisal fibre concrete. Masters thesis, KFUPM.

(1981) Optimizaiton of concrete mix design for durability in the Estern Province of Saudi Arabia. Masters thesis, KFUPM.

(1983) Minimum weight design of nonuniform steel I-girders and columns. Masters thesis, KFUPM.

(1986) Mixed mode fracture for concrete. Masters thesis, KFUPM.

(1985) Influence of cracks on the elastic stability of columns and frames. Masters thesis, KFUPM.

(1994) Deterioration of concrete structures in the coastal regions of the Republic of Yemen. Masters thesis, KFUPM.

(1988) Durability and thermal incompatibility of concrete constituents made from local materials in the Arabian Gulf Countries. Masters thesis, KFUPM.

(1984) Durability assessment criterion for concrete and reinforcement exposed to simulated environmental conditions of Saudi Arabia. Masters thesis, KFUPM.

(2005) Durability performance of GFRP bars under aggressive local exposure conditions. Masters thesis, KFUPM.

(1979) Economic proportioning of continuous steel I - beam. Masters thesis, KFUPM.

(2007) Effect of curing methods on properties of plain and blended cement concretes. Masters thesis, KFUPM.

(1987) Effect of fiber reinforcement on the durability of reinforced concrete in Arabian Gulf Region. Masters thesis, KFUPM.

(1979) Effect of the rigidity of columns and the dimensional changes in beams on post-tensioning forces. Masters thesis, KFUPM.

(1990) Evaluation of repair materials with emphasis on crack injection repair. Masters thesis, KFUPM.

(1989) Evaluation of shear behavior of ferrocement using direct shear specimen and beam specimen. Masters thesis, KFUPM.

(2007) Evaluation of ternary cements for improving concrete durability. Masters thesis, KFUPM.

(1985) Fatigue of concrete in the presence of a crack. Masters thesis, KFUPM.

(1976) Finite beams on an elastic foundation. Masters thesis, KFUPM.

(1989) Finite element modelling for the bending of thick plates. Masters thesis, KFUPM.

(1986) Flexural behavior of ferrocement I-beams and box-beams. Masters thesis, KFUPM.

(1988) Flexural behavior of ferrocement sandwich panels. Masters thesis, KFUPM.

(2006) Flexural behavior of prestressed precast hollow core slabs strengthened with CFRP sheets. Masters thesis, KFUPM.

(1990) Fracture modelling of reinforced concrete beams in mode I crack. Masters thesis, KFUPM.

(1985) Flexural behavior of reinforced sulphur concrete beams. Masters thesis, KFUPM.

(1987) An experimental model study to investigate the effect of scale on dispersion characteristics in chlorine contact. Masters thesis, KFUPM.

(1983) Bio-chemical treatment of saline domestic wastewater using RBCs. Masters thesis, KFUPM.

(1988) Effect of denitrification on dispersion of nitrate in saturated porous media. Masters thesis, KFUPM.

(1980) Environmental considerations in planning of urban areas - a case study of Dammam-Khobar-Dhahran area. Masters thesis, KFUPM.

(1990) Estimating flood quantiles in southwestern part of Saudi Arabia. Masters thesis, KFUPM.

(1985) Evaluating policy changes using a network simulation model. Masters thesis, KFUPM.

(1996) Evaluation of a patented combined water desalination and power generating plant. Masters thesis, KFUPM.

(1987) Evaluation of water quality in KFUPM drinking water system. Masters thesis, KFUPM.

(1978) Feasibility of biological nitrification process for treatment of fertilizer industry water. Masters thesis, KFUPM.

(1979) Increased runoff through reduced infiltration in Saudi Arabia. Masters thesis, KFUPM.

(1983) Influence of Ozone bubbling activity and reaction Kinetics in Ozone-Wastewater disinfection system. Masters thesis, KFUPM.

(2001) Locating optimum water quality monitoring stations in water distribution networks, using genetic algorithm. Masters thesis, KFUPM.

(2004) Optimal locations of booster disinfection stations in Al-Khobar water distribution system. Masters thesis, KFUPM.

(1987) Quality of desalinated blended seawater in Dammam. Masters thesis, KFUPM.

(1986) Tertiary wastewater treatment by direct filtration. Masters thesis, KFUPM.

(2006) Treatment of petroleum refinery wastewater using TiO2-Mediated photocatalysis. Masters thesis, KFUPM.

(2006) Treatment of simulated dairy wastewater by electrocoagulation. Masters thesis, KFUPM.

(2006) Treatment of simulated petrochemical wastewater by means of continuous electrocoagulation-ultrafiltration process. Masters thesis, KFUPM.

(2005) Treatment of the oil refinery wastewater using photocatalysis. Masters thesis, KFUPM.

(1987) Trihalomethanes (THMs) formation in a distillation process. Masters thesis, KFUPM.

(1989) Collocation on irregular domains with adaptive hermite element family for transport problems. PhD thesis, KFUPM.

(1992) Biological treatment of hazardous contaminants in sequencing batch reacors. Masters thesis, KFUPM.

(1991) Non-linear finite element modelling of reinforced concrete slabs. PhD thesis, KFUPM.

(1989) Characterization and treatment of a petrochemical wastewater for reuse. Masters thesis, KFUPM.

(2004) Combined electrooxidation and electrocoagulation processes for the treatment of municipal wastewater. Masters thesis, KFUPM.

(2002) Development of an equivalent dispersion coefficient for a complex contaminant transport model. Masters thesis, KFUPM.

(1988) Dispersion of chloroform in a saturated porous media. Masters thesis, KFUPM.

(1992) Effect of dissolved oxygen on the adsorptive capacity of a granular activated charcoal for phenol and O-Cresol. Masters thesis, KFUPM.

(1993) Evaluation of Dammam carrousel treatment plant for nitrogen removal. Masters thesis, KFUPM.

(1993) Experimental investigation of microbial growth in subsurface environment. Masters thesis, KFUPM.

(1993) Non-linear finite element analysis of reinforced concrete beams repaired by plate bonding. PhD thesis, KFUPM.

(1996) Effects of oily sludge landforming on the soils environment. Masters thesis, KFUPM.

(1989) Investigation of leachate from a sanitary landfill in Saudi Arabia. Masters thesis, KFUPM.

(1997) Fate of secondary effluent flow through porous media. Masters thesis, KFUPM.

(1995) Impact of process variables on nutrient removal in slow sand filters. Masters thesis, KFUPM.

(1997) Microbial evaluation of Al-Khobar wastewater treatment plants. Masters thesis, KFUPM.

(1998) Elastic plastic analysis of semi-rigid industrial frames. PhD thesis, KFUPM.

(2000) Iterative coupling of boundary and finite element methods. PhD thesis, KFUPM.

(1991) Mechanisms of high durability performance of plain and blended cements. PhD thesis, KFUPM.

(1991) Criteria for cathodic protection of steel in concrete in the context of Arabian Gulf environment. PhD thesis, KFUPM.

(1995) Canonical elastoplastic - damage modelling of reinforced concrete. PhD thesis, KFUPM.

(1989) A generalized theory for bending of thick isotropic rectangular plates. PhD thesis, KFUPM.

(2000) Analysis of laminated general shells undergoing finite rotations and large motion. PhD thesis, KFUPM.

(1999) Simulation and assessment of concrete repair systems. PhD thesis, KFUPM.

(2000) Elasto-damage fatigue modeling of RC beams strengthened by CFRP. PhD thesis, KFUPM.

(2000) Durability of high performance concrete. PhD thesis, KFUPM.

(2004) Computational chemo-damage transport modeling of durability synergies in concrete. PhD thesis, KFUPM.

(1978) Analysis of multi girder short span highway bridges. Masters thesis, KFUPM.

(1981) An Investigation of properties of concrete made with concrete rubble as aggregate. Masters thesis, KFUPM.

(1993) Modeling of biological wastewater treatment in sequencing batch reactors. Masters thesis, KFUPM.

(1985) A Variational finite element solution for the Navier-Stokes equations in two dimensions. Masters thesis, KFUPM.

(2003) Risk and hydraulic reliability analysis of water distribution systems. Masters thesis, KFUPM.

(1989) A refined theory for symmetric orthotropic laminated plates. Masters thesis, KFUPM.

(1989) Status of hydrological network in south-western region of the Kingdom of Saudi Arabia. Masters thesis, KFUPM.

(1989) Tertiary treatment of municipal sewage via slow sand filtration. Masters thesis, KFUPM.

(1987) Tertiary wastewater treatment by sedimantation and sand filtration. Masters thesis, KFUPM.

(2003) The Production of activated carbon from local palm-date pits for pollution removal process. Masters thesis, KFUPM.

(1985) A Photoelstic investigation of stress distribution in laterally loaded thin plates simulating window glass panels. Masters thesis, KFUPM.

(2004) Treatment of refinery wastewater using crossflow membrane bioreactor. Masters thesis, KFUPM.

(1989) Use of microtubes in the design of optimized trickle irrigation network. Masters thesis, KFUPM.

(1980) A Photoelastic investigation of the stress distribution in the anchorage zones of post-tensioned concrete slabs. Masters thesis, KFUPM.

(1979) A Photoelastic investigation of stress distribution in deep beams with an without web opening. Masters thesis, KFUPM.

(1991) Treatise on solute transport in porous media and its modeling for centration-dependent permeability. PhD thesis, KFUPM.

(2002) Treatment of water contaminated with dimethyl phthalate by Fenton, Photo-Fenton and UV/H₂O₂ processes. PhD thesis, KFUPM.

(1996) Unsteady hydrodynamic forces on spheroidal bodies. PhD thesis, KFUPM.

(1995) A groundwater velocity and dissolved oxygen on bioremediation of gasoline-contaminated sandy aquifers. PhD thesis, KFUPM.

(2005) Assessment of the relationship between the spilled LNAPL volume and its thickness in monitoring wells. PhD thesis, KFUPM.

(1993) Effect of dissolved oxygen on activated carbon uptake. PhD thesis, KFUPM.

(2003) Study of reaction kinetics of a submerged membrane activated sludge process. PhD thesis, KFUPM.

(1998) Multiobjective water resources planning under demand, supply and quality uncertainties. Masters thesis, KFUPM.

(1994) Numerical simulation of groundwater depletion in Al-Hasa area. Masters thesis, KFUPM.

(1992) Numerical simulation of groundwater in the Umm Er Radhuma Aquifer at Shadco project. Masters thesis, KFUPM.

(1990) Performance of slow sand filters in treating secondary effluent using different sizes of local sand. Masters thesis, KFUPM.

(1997) Predicting short-duration, high-intensity rainfall in Saudi Arabia. Masters thesis, KFUPM.

(1998) Quality changes of secondary effluent as it passes through amended sand column. Masters thesis, KFUPM.

(1997) Quantifying crude oil spill volume in homogeneous and layered porous media from product thickness in monitoring wells. Masters thesis, KFUPM.

(1997) Removal of microorganisms through slow sand filtration of chlorinated vs. nonchlorinated secondary effluents. Masters thesis, KFUPM.

(1991) Reliability studies of multireservoir system using stochastic approach. Masters thesis, KFUPM.

(1995) Removal of coliphage and bacteria through slow sand filtration. Masters thesis, KFUPM.

(1987) Removal of iron and manganese with ozone. Masters thesis, KFUPM.

(1992) Nonlinear Behavior of Cylinder-Plate Junction of Tensionless Elastic Subgrade. Masters thesis, KING FAHD UNIVERSITY OF PETROLEUM & MINERALS.

(1992) Optimal Design of Reinforced Concrete Frames. Masters thesis, KING FAHD UNIVERSITY OF PETROLEUM & MINERALS.

(1991) Reliability Studies of Multi-Reservoir System Using Stochastic Approach. Masters thesis, KING FAHD UNIVERSITY OF PETROLEUM & MINERALS.

(1991) Characterization of Expansive Soils in the Eastern Province of Saudi Arabia. Masters thesis, KING FAHD UNIVERSITY OF PETROLEUM & MINERALS.

(1992) Biological Treatment of Hazardous Contaminants in Sequencing Batch Reactors. Masters thesis, KING FAHD UNIVERSITY OF PETROLEUM & MINERALS.

(1992) Numerical Simulation of Groundwater in the Umm er Radhuma Aquifer at Shadco Project – Eastern Province. Masters thesis, KING FAHD UNIVERSITY OF PETROLEUM & MINERALS.

(1992) Effect of Dissolved Oxygen on the Adsorptive Capacity of a Granular Activated Charcoal For Phenol and O-Cresol. Masters thesis, KING FAHD UNIVERSITY OF PETROLEUM & MINERALS.

(1993) Modeling of Biological Wastewater Treatment in Sequencing Batch Reactors. Masters thesis, KING FAHD UNIVERSITY OF PETROLEUM & MINERALS.

(1990) Performance of Slow Sand Filters In Treating Secondary Effluent Using Different Sizes of Local Sand. Masters thesis, KING FAHD UNIVERSITY OF PETROLEUM & MINERALS.

(1992) Flexture and Shear Behaviour of Damaged RC Beams Repaired By Plate Bonding. Masters thesis, KING FAHD UNIVERSITY OF PETROLEUM & MINERALS.