A CMOS bandpass filter for low-IF bluetooth receivers

(2006) A CMOS bandpass filter for low-IF bluetooth receivers. Circuits and Systems I: Regular Papers, IEEE Transactions on [Circuits and Systems I: Fundamental Theory and Applications, IEEE Transactions on], 53.

[img]
Preview
PDF
14248_1.pdf

Download (19kB) | Preview
[img] Microsoft Word
14248_2.doc

Download (26kB)

Abstract

A CMOS fully integrated 12th-order bandpass filter for low interemdiate frequency Bluetooth receivers is presented. The design is optimized to meet the selectivity and dynamic range requirements of Bluetooth while consuming relatively low power. The filter is based on unity gain cells and utilizes linearized MOSFET resistors for tuning. It exhibits a bandwidth of 1 MHz and a programmable center frequency range of 2 to 4 MHz. Experimental results obtained from a standard 0.5-/spl mu/m CMOS chip show that the filter exhibits an in-band dynamic range of 53.3 dB at gain of 0 dB, and 52 dB at gain of 15 dB, while consuming a total current of 1.32 mA. Attenuations of more than 10, 38, and 55 dB, are achieved for blockers one, two, and three, respectively.

Item Type: Article
Subjects: Computer
Department: College of Design and Built Environment > Civil and Environmental Engineering
Depositing User: Mr. Admin Admin
Date Deposited: 24 Jun 2008 13:28
Last Modified: 01 Nov 2019 14:04
URI: http://eprints.kfupm.edu.sa/id/eprint/14248