Items where Department is "Civil and Environmental Engineering" and Year is 2008
 | Up a level |
Large deformation analysis of plates on unilateral elastic foundation. Large deformation analysis of plates on unilateral elastic foundation.
Nonaxisymmetric unbonded contact of plates on tensionless Winkler foundations. Nonaxisymmetric unbonded contact of plates on tensionless Winkler foundations.
ANALYSIS OF LARGE OPENINGS IN CYLINDRICAL VESSELS INCLUDING NOZZLE FLEXIBILITY. ANALYSIS OF LARGE OPENINGS IN CYLINDRICAL VESSELS INCLUDING NOZZLE FLEXIBILITY..
Stability of vertically bent pipelines buried in sand. Stability of vertically bent pipelines buried in sand.
Finite element formulation of a third order laminated finite rotation shell element. Finite element formulation of a third order laminated finite rotation shell element.
Analysis and design of pipeline stiffened-anchor plate/flange. Analysis and design of pipeline stiffened-anchor plate/flange.
concrete plasticity model with elliptic failure surface and independent hardening/softening. concrete plasticity model with elliptic failure surface and independent hardening/softening.
Mixed hardening, three-invariants dependent cap model. Mixed hardening, three-invariants dependent cap model.
Layered nonhomogeneous curved beam elements for inelastic analysis. Layered nonhomogeneous curved beam elements for inelastic analysis.
Performance of plain and blended cements exposed to high sulphate concentrations. Performance of plain and blended cements exposed to high sulphate concentrations.
Sulfate resistance of plain and blended cements exposed to magnesium sulfate solutions. Sulfate resistance of plain and blended cements exposed to magnesium sulfate solutions.
29Si MAS-NMR study of hydrated cement paste and mortar with varying content of fly ash. 29Si MAS-NMR study of hydrated cement paste and mortar with varying content of fly ash.
Effect of inhibitor treatment on corrosion of steel in a salt solution. Effect of inhibitor treatment on corrosion of steel in a salt solution.
Mechanical properties and durability characteristics of polymer- and cement-based repair materials. Mechanical properties and durability characteristics of polymer- and cement-based repair materials.
Sulfate resistance of plain and blended cements exposed to varying concentrations of sodium sulfate. Sulfate resistance of plain and blended cements exposed to varying concentrations of sodium sulfate.
Effect of waterproofing coatings on steel reinforcement corrosion and physical properties of concrete. Effect of waterproofing coatings on steel reinforcement corrosion and physical properties of concrete.
Effect of rebar cleanliness and repair materials on reinforcement corrosion and flexural strength of repaired concrete beams. Effect of rebar cleanliness and repair materials on reinforcement corrosion and flexural strength of repaired concrete beams.
Effect of environmental pre-conditioning on bond of FRP reinforcement to concrete. Effect of environmental pre-conditioning on bond of FRP reinforcement to concrete.
Evaluation of bond using FRP rods with axisymmetric deformations. Evaluation of bond using FRP rods with axisymmetric deformations.
Effect of Cyclic Loading on Bond Behavior of GFRP Rods Embedded in Concrete Beams. Effect of Cyclic Loading on Bond Behavior of GFRP Rods Embedded in Concrete Beams.
29Si MAS-NMR study of hydrated cement paste and mortar made with and without silica fume. 29Si MAS-NMR study of hydrated cement paste and mortar made with and without silica fume.
29Si magic-angle-spinning nuclear magnetic resonance study of hydrated cement paste and mortar. 29Si magic-angle-spinning nuclear magnetic resonance study of hydrated cement paste and mortar.
Contractor financing, public works in Saudi Arabia. Contractor financing, public works in Saudi Arabia.
29Si MAS-NMR hydration and compressive strength study in cement paste. 29Si MAS-NMR hydration and compressive strength study in cement paste.
Effect of steel manufacturing process and atmospheric corrosion on the corrosion-resistance of steel bars in concrete. Effect of steel manufacturing process and atmospheric corrosion on the corrosion-resistance of steel bars in concrete.
HLXVIB - A computer code for free vibration analysis of circular helicoidal bars. HLXVIB - A computer code for free vibration analysis of circular helicoidal bars.
Computer algorithm for the static analysis of circular helicoidal bars. Computer algorithm for the static analysis of circular helicoidal bars.
Loss of punching capacity of bridge deck slabs from crack damage. Loss of punching capacity of bridge deck slabs from crack damage.
Assessment of damage to concrete girder-slab bridges in Saudi Arabia. Assessment of damage to concrete girder-slab bridges in Saudi Arabia.
Categorization of damage to concrete bridge decks in Saudi Arabia. Categorization of damage to concrete bridge decks in Saudi Arabia.
Performance of epoxy-repaired concrete under thermal cycling. Performance of epoxy-repaired concrete under thermal cycling.
Third order shear deformation model for laminated shells with finite rotations: Formulation and consistent linearization. Third order shear deformation model for laminated shells with finite rotations: Formulation and consistent linearization.
Effect of silica fume on the mechanical properties of low quality coarse aggregate concrete. Effect of silica fume on the mechanical properties of low quality coarse aggregate concrete.
Effectiveness of corrosion inhibitors in contaminated concrete. Effectiveness of corrosion inhibitors in contaminated concrete.
Effectiveness of surface coatings in improving concrete durability. Effectiveness of surface coatings in improving concrete durability.
Effect of coarse aggregate quality on the mechanical properties of high strength concrete. Effect of coarse aggregate quality on the mechanical properties of high strength concrete.
Performance of concrete coatings under varying exposure conditions. Performance of concrete coatings under varying exposure conditions.
Effect of degree of corrosion on the properties of reinforcing steel bars. Effect of degree of corrosion on the properties of reinforcing steel bars.
Dynamics of flexible-link and flexible-joint manipulator carrying a payload with rotary inertia. Dynamics of flexible-link and flexible-joint manipulator carrying a payload with rotary inertia.
Effect of mix proportions on plastic shrinkage cracking of concrete in hot environments. Effect of mix proportions on plastic shrinkage cracking of concrete in hot environments.
Plastic shrinkage cracking of concrete in hot-arid environments. Plastic shrinkage cracking of concrete in hot-arid environments.
Evaluation of repair materials for functional improvement of slabs and beams with corroded reinforcement. Evaluation of repair materials for functional improvement of slabs and beams with corroded reinforcement.
Effectiveness of concrete surface treatment materials in reducing chloride-induced reinforcement corrosion. Effectiveness of concrete surface treatment materials in reducing chloride-induced reinforcement corrosion.
Three-dimensional Mohr's circle for shear stress components. Three-dimensional Mohr's circle for shear stress components.
Three-dimensional graphical method for shear strain analysis. Three-dimensional graphical method for shear strain analysis.
Effectiveness of concrete surface treatment materials in reducing chloride-induced reinforcement corrosion. Effectiveness of concrete surface treatment materials in reducing chloride-induced reinforcement corrosion.
Effect of reinforcement corrosion on bond strength. Effect of reinforcement corrosion on bond strength.
Effect of reinforcement corrosion on flexural behavior of concrete slabs. Effect of reinforcement corrosion on flexural behavior of concrete slabs.
Dynamic response of circular cylinders in cross-flow. Dynamic response of circular cylinders in cross-flow.
Energy-momentum conserving algorithm for nonlinear dynamics of laminated shells based on a third-order shear deformation theory. Energy-momentum conserving algorithm for nonlinear dynamics of laminated shells based on a third-order shear deformation theory.
Remote sensing application to the management of agricultural drainage water in severely arid region: a case study. Remote sensing application to the management of agricultural drainage water in severely arid region: a case study.
Rate and mode of barchan dunes advance in the central part of the Jafurah Sand Sea. Rate and mode of barchan dunes advance in the central part of the Jafurah Sand Sea.
Weather modification impact on reference evapotranspiration, soil salinity and desertification in arid regions: a case study. Weather modification impact on reference evapotranspiration, soil salinity and desertification in arid regions: a case study.
Si MAS-NMR study of hydrated cement paste and mortar with varying content of fly ash. Si MAS-NMR study of hydrated cement paste and mortar with varying content of fly ash.
STRESS DISTRIBUTION IN DEEP BEAMS WITH WEB OPENINGS. STRESS DISTRIBUTION IN DEEP BEAMS WITH WEB OPENINGS..
Development of calcium silicate thermal insulator in Saudi Arabia. Development of calcium silicate thermal insulator in Saudi Arabia.
Evaluation of corrosion resistance of reinforcing steel in sulfur concrete. Evaluation of corrosion resistance of reinforcing steel in sulfur concrete.
Effect of hot weather on strength of reinforced concrete beams. Effect of hot weather on strength of reinforced concrete beams.
Permeability and durability of plain and blended cement concretes cured in field and laboratory conditions. Permeability and durability of plain and blended cement concretes cured in field and laboratory conditions.
EFFECT OF HOT CLIMATE ON SHEAR STRENGTH OF CONCRETE. EFFECT OF HOT CLIMATE ON SHEAR STRENGTH OF CONCRETE.
Effect of sulfate ions on the corrosion of rebars embedded in concrete. Effect of sulfate ions on the corrosion of rebars embedded in concrete.
EFFECT OF FILLER TYPE ON THE DURABILITY OF SULFUR-SAND COMPOSITES IN THE ARABIAN GULF COUNTRIES. EFFECT OF FILLER TYPE ON THE DURABILITY OF SULFUR-SAND COMPOSITES IN THE ARABIAN GULF COUNTRIES..
CORROSION OF STEEL REINFORCEMENT IN SULFUR CONCRETE. CORROSION OF STEEL REINFORCEMENT IN SULFUR CONCRETE.
Si magic-angle-spinning nuclear magnetic resonance study of hydrated cement paste and mortar. Si magic-angle-spinning nuclear magnetic resonance study of hydrated cement paste and mortar.
Si MAS-NMR study of hydrated cement paste and mortar made with and without silica fume. Si MAS-NMR study of hydrated cement paste and mortar made with and without silica fume.
Use of polypropylene fibers to enhance deterioration resistance of concrete surface skin subjected to cyclic wet/dry sea water exposure. Use of polypropylene fibers to enhance deterioration resistance of concrete surface skin subjected to cyclic wet/dry sea water exposure.
Effect of sulfate and carbonate ions on reinforcing steel corrosion as evaluated using AC impedance spectroscopy. Effect of sulfate and carbonate ions on reinforcing steel corrosion as evaluated using AC impedance spectroscopy.
Corrosion behavior of pre-rusted rebars after placement in concrete. Corrosion behavior of pre-rusted rebars after placement in concrete.
Corrosion of steel reinforcement in polypropylene fiber reinforced concrete structures. Corrosion of steel reinforcement in polypropylene fiber reinforced concrete structures.
CORROSION RATE MEASUREMENTS OF REINFORCING STEEL IN CONCRETE BY ELECTROCHEMICAL TECHNIQUES. CORROSION RATE MEASUREMENTS OF REINFORCING STEEL IN CONCRETE BY ELECTROCHEMICAL TECHNIQUES..
Effect of thermal cycling on the durability of concrete made from local materials in the Arabian Gulf countries. Effect of thermal cycling on the durability of concrete made from local materials in the Arabian Gulf countries.
Si MAS-NMR hydration and compressive strength study in cement paste. Si MAS-NMR hydration and compressive strength study in cement paste.
LABORATORY STUDY ON THE EFFECT OF SULFATE IONS ON REBAR CORROSION. LABORATORY STUDY ON THE EFFECT OF SULFATE IONS ON REBAR CORROSION..
EVALUATION OF DEGREE OF HYDRATION IN CONCRETE USING **2**9Si MAGIC ANGLE SPINNING NMR IN SOLIDS. EVALUATION OF DEGREE OF HYDRATION IN CONCRETE USING **2**9Si MAGIC ANGLE SPINNING NMR IN SOLIDS..
EFFECT OF POLYPROPYLENE FIBER REINFORCEMENT ON THE PROPERTIES OF FRESH AND HARDENED CONCRETE IN THE ARABIAN GULF ENVIRONMENT. EFFECT OF POLYPROPYLENE FIBER REINFORCEMENT ON THE PROPERTIES OF FRESH AND HARDENED CONCRETE IN THE ARABIAN GULF ENVIRONMENT..
EFFECT OF HOT WEATHER ON MODULUS OF RUPTURE AND SPLITTING TENSILE STRENGTH OF CONCRETE. EFFECT OF HOT WEATHER ON MODULUS OF RUPTURE AND SPLITTING TENSILE STRENGTH OF CONCRETE..
Viscous flow over a sphere with fluctuations in the free-stream velocity. Viscous flow over a sphere with fluctuations in the free-stream velocity.
Effect of groundwater velocity on pilot scale bioremediation of gasoline contaminated sandy aquifers. Effect of groundwater velocity on pilot scale bioremediation of gasoline contaminated sandy aquifers.
Tidal effects on transport of contaminants in a coastal shallow aquifer. Tidal effects on transport of contaminants in a coastal shallow aquifer.
Modeling transport and biodegradation of BTX compounds in saturated sandy soil. Modeling transport and biodegradation of BTX compounds in saturated sandy soil.
Estimating flood quantiles in southwestern part of Saudi Arabia. Estimating flood quantiles in southwestern part of Saudi Arabia.
State-of-the-art review of bioremediation studies. State-of-the-art review of bioremediation studies.
Experimental study and numerical simulation of denitrification in saturated porous media. Experimental study and numerical simulation of denitrification in saturated porous media.
Solution of the transport equation by the collocation method in conjunction with the adaptive hermite element family. Solution of the transport equation by the collocation method in conjunction with the adaptive hermite element family.
A simple arrangement and procedure for in-situ measurement of corrosion rate of rebar embedded in concrete. A simple arrangement and procedure for in-situ measurement of corrosion rate of rebar embedded in concrete.
Assessment of service lives of R.C. structures subjected to chloride-induced rebar corrosion. Assessment of service lives of R.C. structures subjected to chloride-induced rebar corrosion.
Experimental service life prediction of rebar corroded R.C. structure. Experimental service life prediction of rebar corroded R.C. structure.
Design procedures for cathodic protection systems for R.C.C. members. Design procedures for cathodic protection systems for R.C.C. members.
Empirical modelling of indicators of chloride-induced rebar corrosion. Empirical modelling of indicators of chloride-induced rebar corrosion.
Reinforcement corrosion in concrete structures, its monitoring and service life prediction - A review. Reinforcement corrosion in concrete structures, its monitoring and service life prediction - A review.
Chloride penetration into silica fume concrete subject to different exposures. Chloride penetration into silica fume concrete subject to different exposures.
Residual strength of corrosion-damaged reinforced concrete beams. Residual strength of corrosion-damaged reinforced concrete beams.
Optimum concrete mixture design using locally available ingredients. Optimum concrete mixture design using locally available ingredients.
Compliance criteria for quality concrete. Compliance criteria for quality concrete.
Correlations between depth of water penetration, chloride permeability, and coefficient of chloride diffusion in plain, silica fume, and fly ash cement concretes. Correlations between depth of water penetration, chloride permeability, and coefficient of chloride diffusion in plain, silica fume, and fly ash cement concretes.
A study of the relationship between permeability and tortuosity of concrete. A study of the relationship between permeability and tortuosity of concrete. (Submitted)
Correlation between strength and durability indices of plain and blended cement concretes. Correlation between strength and durability indices of plain and blended cement concretes. (Submitted)
A study of self-compacting concrete made with marginal aggregates. A study of self-compacting concrete made with marginal aggregates. (In Press)
Recent developments in sulfur concrete technology. In: Recent developments in sulfur concrete technology.
A damage-propagation model for chloride-induced corrosion of reinforced concrete beams. In: 8th International Conference on Concrete in Hot and Aggressive Environments, 27-29 November 2006, Bahrain.
Recent developments in sulfur concrete technology. In: 7th International Conference and Exhibition on Chemistry in Industry (CHEMINDIX 2007), 26-28 March 2007, Bahrain.
Strategy for monitoring and repairing of concrete bridges exposed to corrosive environments. In: 3rd Gulf Conference on Roads (TGCR06), 6-8 March 2006, Muscat.
A study of permeability and tortuosity of concrete. In: 30th Conference on Our World in Concrete & Structures (OW 05), 23-24 August 2005, Singapore.
Methodology for the assessment of corrosion damage in reinforced concrete structures. In: Eighth International Conference on Concrete Engineering & Technology (CONCET 2004), 19-21 April 2004, Kuala Lumpur, Malaysia.
Improving durability of R.C. members through optimum selection of the levels of corrosion cracking factors. In: 7th International Conference on Concrete in Hot and Aggressive Environments, 13-15 October 2003, Bahrain.
Reinforcement corrosion in the Arabian Gulf and its prevention– a review. In: 7th International Conference on Concrete in Hot and Aggressive Environments, 13-15 October 2003, Bahrain.
Wastewater management for electroplating industries. In: International Conference on Environmental Challenges for the New Millennium, 25th-27th Nov. 1999, New Delhi, India.
Effect of acidic waste water on mortar and concrete. In: International Symposium on Innovative World of Concrete-98, 16-19 November, 1998, Calcutta, India.
Influence of chloride content, cover, and concrete mix parameters on post depassivation service life of chloride contaminated R.C. structures. In: International Conference on Maintenance and Durability of Concrete Structures, 4-6 March, 1997, J.N.T. University, Hyderabad, India.
Rebar corrosion risk due to free chloride under tropical conditions. In: International Conference on New Challenges for Civil Engineers of Developing Countries in the 21st Century, 29 February, 1, 2 March, 1996, New Delhi, India.
Environmental problems due to fly ash and its use as building material. In: International Conference on New Challenges for Civil Engineers of Developing Countries in the 21st Century, 29 February, 1, 2 March, 1996, New Delhi, India.
Environmental risk assessment. In: International Conference on New Challenges for Civil Engineers of Developing Countries in the 21st Century, 29 February, 1, 2 March, 1996, New Delhi, India.
Diagnostic methods for rehabilitation of corrosion damaged R.C. structure. In: National Conference on Civil Engineering Materials and Structures, 19-21 January, 1995, Osmania University, Hyderabad, India.
A study of the size-effect of corroded reinforced concrete beams in prediction of residual strength. Project Report. KFUPM.
Formulating supplementary compliance criteria for locally produced concrete. Project Report. KFUPM.
A study of self-compacting concrete using local marginal aggregates. Project Report. KFUPM.
Study on PVC pipe products and causes of failures. Project Report. KFUPM.
Establishing quality compliance criteria for concrete in Eastern Saudi Arabia. Project Report. KFUPM.
A study of the relationship between permeability and tortuosity of concrete. Project Report. KFUPM.
Prediction of residual strength of corrosion-damaged reinforced concrete beams. Project Report. KFUPM.
Evaluation of sulfur concrete technology for local applications. Project Report. KFUPM.
Behaviour of patch repair of axially loaded reinforced concrete beams. Behaviour of patch repair of axially loaded reinforced concrete beams.
Evaluation of repair materials for functional improvement of slabs and beams with corroded reinforcement. In: Proceedings of the Institution of Civil Engineers: Structures and Buildings.
Use of surface treatment materials to improve concrete durability. Use of surface treatment materials to improve concrete durability.
Effect of cement composition on corrosion of reinforcing steel in concrete. In: From authors.
A repair strategy for corrosion damaged concrete. In: From authors.
Plastic shrinkage cracking of concrete in hot-arid environments. Plastic shrinkage cracking of concrete in hot-arid environments.
Effectiveness of concrete surface treatment materials in reducing chloride-induced reinforcement corrosion. Effectiveness of concrete surface treatment materials in reducing chloride-induced reinforcement corrosion.
Chloride threshold for corrosion of reinforcement in concrete. Chloride threshold for corrosion of reinforcement in concrete.
Effect of reinforcement corrosion on flexural behavior of concrete slabs. Effect of reinforcement corrosion on flexural behavior of concrete slabs.
Effect of reinforcement corrosion on bond strength. Effect of reinforcement corrosion on bond strength.
Factors affecting threshold chloride for reinforcement corrosion in concrete. Factors affecting threshold chloride for reinforcement corrosion in concrete.
A comparison between mixing and grouting approaches for treating calcareous expansive clay. In: Grouting and deep mixing. Proc. conference, Tokyo,.
Design optimization of continuous partially prestressed concrete beams. Design optimization of continuous partially prestressed concrete beams.
Treatment of calcareous expansive clays. In: Fly Ash for Soil Improvement,.
Evaluation study of modified Mohr-Coulomb and cap models. In: Proceedings of Engineering Mechanics.
Al-Gahtani, A.S., Al-Mussallam, A.A. Al-Gahtani, A.S., Al-Mussallam, A.A..
Rebar corrosion and sulfate resistance of blast-furnace slag cement. Rebar corrosion and sulfate resistance of blast-furnace slag cement.
Influence of sulfates on chloride binding in cements. Influence of sulfates on chloride binding in cements.
Corrosion of reinforcing steel in fly ash blended cement concrete. Corrosion of reinforcing steel in fly ash blended cement concrete.
Interaction of steel jacket platform with surrounding soil. In: CONF. ON OFFSHORE MECHANICS AND ARCTIC ENGINEERING.
Corrosion cracking in relation to bar diameter, cover, and concrete quality. Corrosion cracking in relation to bar diameter, cover, and concrete quality.
Reinforcement corrosion-resisting characteristics of silica-fume blended-cement concrete. Reinforcement corrosion-resisting characteristics of silica-fume blended-cement concrete.
Interaction Of Steel Jacket Platform With Surrounding Soil. In: Proceedings of the International Offshore Mechanics and Arctic Engineering Symposium.
Pore solution composition and reinforcement corrosion characteristics of microsilica blended cement concrete. Pore solution composition and reinforcement corrosion characteristics of microsilica blended cement concrete.
Effect of tricalcium aluminate content of cement on corrosion of reinforcing steel in concrete. Effect of tricalcium aluminate content of cement on corrosion of reinforcing steel in concrete.
Influence of cement composition on the corrosion of reinforcement and sulfate resistance of concrete. Influence of cement composition on the corrosion of reinforcement and sulfate resistance of concrete.
Effect of rusting of reinforcing steel on its mechanical properties and bond with concrete. Effect of rusting of reinforcing steel on its mechanical properties and bond with concrete.
Influence of construction practices on concrete durability. Influence of construction practices on concrete durability.
Engineering properties of the soil of Sana'a, the Yemen Arab Republic. Engineering properties of the soil of Sana'a, the Yemen Arab Republic.
Software For Optimum Design Of Highway Bridge Beams. Software For Optimum Design Of Highway Bridge Beams..
Deterioration Of Concrete Structures In The Environment Of The Middle East. Deterioration Of Concrete Structures In The Environment Of The Middle East..
Soil deformation and shear strength characteristics of the Sana'a soil, Yemen Arab Republic. Soil deformation and shear strength characteristics of the Sana'a soil, Yemen Arab Republic.
Characteristics and chemical treatment of expansive clay in Al- Qatif, Saudi Arabia. Characteristics and chemical treatment of expansive clay in Al- Qatif, Saudi Arabia.
Mixed hardening, three-invariants dependent cap model. Mixed hardening, three-invariants dependent cap model.
Expansive soil in Al-Madinah, Saudi Arabia. Expansive soil in Al-Madinah, Saudi Arabia.
Geotechnical behavior of oil-contaminated fine-grained soils. Geotechnical behavior of oil-contaminated fine-grained soils.
Stability of vertically bent pipelines buried in sand. Stability of vertically bent pipelines buried in sand.
Response of sabkha to laboratory tests: a case study. Response of sabkha to laboratory tests: a case study.
Determination of parameters for a hyperbolic model of soils. Determination of parameters for a hyperbolic model of soils.
Effects of confining pressure and temperature on mixed-mode (I-II) fracture toughness of a limestone rock. Effects of confining pressure and temperature on mixed-mode (I-II) fracture toughness of a limestone rock.
A generalized three invariants cap model and its numerical implementation to study soil-foundation interaction. A generalized three invariants cap model and its numerical implementation to study soil-foundation interaction.
Reuse of wastewater effluents in saudi arabia. In: Reuse of wastewater effluents in saudi arabia.
Inhibition of atmospheric corrosion of mild steel by sodium dihydrogen orthophosphate treatment. In: Inhibition of atmospheric corrosion of mild steel by sodium dihydrogen.
Bond evaluation of environmentally conditioned GFRP/concrete systems. In: Bond evaluation of environmentally conditioned GFRP/concrete systems.
Effects of Calcium Sulfate on Swelling Potential of an Expansive Clay. Effects of Calcium Sulfate on Swelling Potential of an Expansive Clay.
Determination of parameters for a hyperbolic model of soils. In: Determination of parameters for a hyperbolic model of soils.
Study on the performance of calcareous expansive clays. Study on the performance of calcareous expansive clays.
A generalized three invariants cap model and its numerical implementation to study soil-foundation interaction. In: A generalized three invariants cap model and its numerical implementation to study.
Influence of gypsification on engineering behavior of expansive clay. Influence of gypsification on engineering behavior of expansive clay.
Evaluation study of modified Mohr-Coulomb and cap models. In: Evaluation study of modified Mohr-Coulomb and cap models.
Expansive characteristics of gypsiferous/anhydritic soil formations. Expansive characteristics of gypsiferous/anhydritic soil formations.
Laboratory and field studies of response of structures to heave of expansive clay. Laboratory and field studies of response of structures to heave of expansive clay.
Compressibility and collapse characteristics of arid saline sabkha soils. Compressibility and collapse characteristics of arid saline sabkha soils.
Geotechnical behaviour of saline sabkha soils. Geotechnical behaviour of saline sabkha soils.
Strength characteristics of sabkha soils. Strength characteristics of sabkha soils.
Improvement of plasticity and swelling potential of calcareous expansive clays. Improvement of plasticity and swelling potential of calcareous expansive clays.
Influence of geotextiles on performance of saline sebkha soils. Influence of geotextiles on performance of saline sebkha soils.
Modified oedometer for arid, saline soils. Modified oedometer for arid, saline soils.
Swelling behaviour of calcareous clays from the Eastern Province of Saudi Arabia. Swelling behaviour of calcareous clays from the Eastern Province of Saudi Arabia.
Suggested modifications to ASTM standard methods when testing arid, saline soils. Suggested modifications to ASTM standard methods when testing arid, saline soils.
Influence of chloride ions on sulphate deterioration in plain and blended cements. Influence of chloride ions on sulphate deterioration in plain and blended cements.
Influence of sulfate ions on chloride-induced reinforcement corrosion in portland and blended cement concretes. Influence of sulfate ions on chloride-induced reinforcement corrosion in portland and blended cement concretes.
Magnesium-sodium sulfate attack in plain and blended cements. Magnesium-sodium sulfate attack in plain and blended cements.
Compressibility and swelling characteristics of Al-Khobar Palygorskite, eastern Saudi Arabia. Compressibility and swelling characteristics of Al-Khobar Palygorskite, eastern Saudi Arabia.
Effect of geotextile and cement on the performance of sabkha subgrade. Effect of geotextile and cement on the performance of sabkha subgrade.
Estimation of spilled hydrocarbon volume - The state-of-the-art. Estimation of spilled hydrocarbon volume - The state-of-the-art.
Analytical model to quantify crude oil spill volume in sandy layered aquifers. Analytical model to quantify crude oil spill volume in sandy layered aquifers.
Effectiveness of stone columns: Field assessment. Effectiveness of stone columns: Field assessment.
Nonwoven geotextile-sabkha and -sand interface friction characteristics using pull-out tests. Nonwoven geotextile-sabkha and -sand interface friction characteristics using pull-out tests.
Optimization of steel slag aggregates for bituminous mixes in Saudi Arabia. Optimization of steel slag aggregates for bituminous mixes in Saudi Arabia.
Utilization of local material in the construction of an embankment for recharging groundwater aquifer with treated wastewater effluents. Utilization of local material in the construction of an embankment for recharging groundwater aquifer with treated wastewater effluents.
The effect of temperature on the engineering properties of oil-contaminated sands. The effect of temperature on the engineering properties of oil-contaminated sands.
Performance of a stabilized marl base: A case study. Performance of a stabilized marl base: A case study.
Centrifugal modeling of bearing capacity of shallow foundations on sands. Centrifugal modeling of bearing capacity of shallow foundations on sands.
Strength and compressibility of Abqaiq marl, Saudi Arabia. Strength and compressibility of Abqaiq marl, Saudi Arabia.
A study of sand stabilization in eastern Saudi Arabia. A study of sand stabilization in eastern Saudi Arabia.
Evaluation of the flow pump and constant head techniques for permeability measurements. Evaluation of the flow pump and constant head techniques for permeability measurements.
Utilization of steel slag aggregate for road bases. Utilization of steel slag aggregate for road bases.
(2000) Effect of La3+ substitution for Sr2+ on thephase formation, structure and properties of (Tl0.5Pb0.5)Sr2Ca2Cu3Oy compounds. Applied Superconductivity, IEEE Transactions on, 10.
(2003) Analysis of multi-layer ARROW. Electronics, Circuits and Systems, 2003. ICECS 2003. Proceedings of the 2003 10th IEEE International conference, 3.
(2002) Spatial domain modeling of microcellular systems operating in multipath Nakagami channels. Personal, Indoor and Mobile Radio Communications, 2002. The 13th IEEE International Symposium on, 4.
(2006) A CMOS bandpass filter for low-IF bluetooth receivers. Circuits and Systems I: Regular Papers, IEEE Transactions on [Circuits and Systems I: Fundamental Theory and Applications, IEEE Transactions on], 53.
(2000) Transport, magnetic and structural properties of(Tl0.5Pb0.5)Sr2-xCexCa2Cu3Oy compounds. Applied Superconductivity, IEEE Transactions on, 10.
(2005) Calibration of VISSIM to the traffic conditions of Khobar and Dammam, Saudi Arabia. Masters thesis, King Fahd University of Petroleum and Minerals.
(2004) Studies on soil-foundation interaction in the Sabkha environment of Eastern Saudi Arabia. Masters thesis, King Fahd University of Petroleum and Minerals.
(2005) A prediction model for the residual flexural strength of corroded reinforced concrete beams. Masters thesis, King Fahd University of Petroleum and Minerals.
(2005) Effect of rate of water table rise on LNAPL entrapment in uniform and well-graded sands. Masters thesis, King Fahd University of Petroleum and Minerals.
(2004) Combined electrooxidation and electrocoagulation processes for the treatment of municipal wastewater. Masters thesis, King Fahd University of Petroleum and Minerals.
(2005) Improving the performance of damaged FBECR in chloride-contaminated concrete. Masters thesis, King Fahd University of Petroleum and Minerals.
(2004) Treatment of refinery wastewater using crossflow membrane bioreactor (CF-MBR). Masters thesis, King Fahd University of Petroleum and Minerals.
(2005) Assessment of the relationship between the spilled LNAPL volume and its thickness in monitoring wells considering the water table fluctuation history. PhD thesis, King Fahd University of Petroleum and Minerals.
(1993) Non-linear finite element analysis of reinforced concrete beams repaired by plate bonding. PhD thesis, King Fahd University of Petroleum and Minerals.
(1989) Status of hydrological network in south-western region of the Kingdom of Saudi Arabia. Masters thesis, King Fahd University of Petroleum and Minerals.
(2003) Influence of temperature and wind on moisture transport in cementitious materials. Masters thesis, King Fahd University of Petroleum and Minerals.
(1990) Performance of slow sand filters in treating secondary effluent using different sizes of local sand. Masters thesis, King Fahd University of Petroleum and Minerals.
(1996) Plastic shrinkage cracking in hot weather conditions. Masters thesis, King Fahd University of Petroleum and Minerals.
(1992) Nonlinear behavior of cylinder-plate junction on tensionless elastic subgrade. Masters thesis, King Fahd University of Petroleum and Minerals.
(2002) Treatment of water contaminated with dimethyl phthalate by Fenton, Photo-Fenton and UV/H₂O₂ processes. PhD thesis, King Fahd University of Petroleum and Minerals.
(1995) Canonical elastoplastic - damage modelling of reinforced concrete. PhD thesis, King Fahd University of Petroleum and Minerals.
(2003) Risk and hydraulic reliability analysis of water distribution systems. Masters thesis, King Fahd University of Petroleum and Minerals.
(1994) The effects of mode perceptions on intercity mode-choice behavior in Saudi Arabia. PhD thesis, King Fahd University of Petroleum and Minerals.
(1997) Relationship between the noncompliance behavior at signalized intersection an driver characteristics. Masters thesis, King Fahd University of Petroleum and Minerals.
(2000) The Interaction between soil and buried bent pipelines. Masters thesis, King Fahd University of Petroleum and Minerals.
(2000) Effects of geotextiles on the load-carrying capacity of pavements on Sabkha. Masters thesis, King Fahd University of Petroleum and Minerals.
(1993) Evaluation of Dammam carrousel treatment plant for nitrogen removal. Masters thesis, King Fahd University of Petroleum and Minerals.
(1995) Impact of process variables on nutrient removal in slow sand filters. Masters thesis, King Fahd University of Petroleum and Minerals.
(1998) Multiobjective water resources planning under demand, supply and quality uncertainties. Masters thesis, King Fahd University of Petroleum and Minerals.
(1997) Performance evaluation of slow sand filters: a probabilistic approach. Masters thesis, King Fahd University of Petroleum and Minerals.
(1997) Modeling of pavement condition and maintenance priority ranking for road networks. PhD thesis, King Fahd University of Petroleum and Minerals.
(1994) Numerical simulation of groundwater depletion in Al-Hasa area. Masters thesis, King Fahd University of Petroleum and Minerals.
(1997) A Study on the development of vehicular loding for design of highway bridges in Saudi Arabia. Masters thesis, King Fahd University of Petroleum and Minerals.
(1994) The effect of signal coordination on interesection safety. PhD thesis, King Fahd University of Petroleum and Minerals.
(1997) Optimization of parabolic steel box arches. Masters thesis, King Fahd University of Petroleum and Minerals.
(1989) A generalized theory for bending of thick isotropic rectangular plates. PhD thesis, King Fahd University of Petroleum and Minerals.
(1995) Elasto-plastic collapse load analysis of single mitred bends. Masters thesis, King Fahd University of Petroleum and Minerals.
(2001) Effect of gradation and testing procedures on the load carrying capacity of calcareous sediments. Masters thesis, King Fahd University of Petroleum and Minerals.
(1995) A groundwater velocity and dissolved oxygen on bioremediation of gasoline-contaminated sandy aquifers. PhD thesis, King Fahd University of Petroleum and Minerals.
(1989) Characterization and treatment of a petrochemical wastewater for reuse. Masters thesis, King Fahd University of Petroleum and Minerals.
(1995) Use of small diameter cores in evaluation of in-situ concrete strength in Eastern Saudi Arabia. Masters thesis, King Fahd University of Petroleum and Minerals.
(2000) Behavior of laterally loaded pile group model in sand. Masters thesis, King Fahd University of Petroleum and Minerals.
(1998) Quality changes of secondary effluent as it passes through amended sand column. Masters thesis, King Fahd University of Petroleum and Minerals.
(1994) Chloride diffusion in concrete/prediction of the onset of corrosion in reinforced concrete structures. Masters thesis, King Fahd University of Petroleum and Minerals.
(2002) Performance modification of Saudi-asphalt binders using SABIC polymers. Masters thesis, King Fahd University of Petroleum and Minerals.
(1991) Reliability studies of multireservoir system using stochastic approach. Masters thesis, King Fahd University of Petroleum and Minerals.
(1996) Protection of reinforced concrete using corrosion inhibitors and coatings. Masters thesis, King Fahd University of Petroleum and Minerals.
(1989) Pedestrian behavior related to accident involvement. Masters thesis, King Fahd University of Petroleum and Minerals.
(1997) Fate of secondary effluent flow through porous media. Masters thesis, King Fahd University of Petroleum and Minerals.
(1998) Performance optimization and modeling of slurry seal and micro surfacing utilizing steel slag aggregates. Masters thesis, King Fahd University of Petroleum and Minerals.
(1994) Three dimensional finite element analysis of brittle materials using CDM model. Masters thesis, King Fahd University of Petroleum and Minerals.
(1991) Treatise on solute transport in porous media and its modeling for centration-dependent permeability. PhD thesis, King Fahd University of Petroleum and Minerals.
(1995) Removal of coliphage and bacteria through slow sand filtration. Masters thesis, King Fahd University of Petroleum and Minerals.
(1996) Proposed methodology for designing the signal change interval. Masters thesis, King Fahd University of Petroleum and Minerals.
(1995) Boundary element analysis of nonprismatic beams and plates. Masters thesis, King Fahd University of Petroleum and Minerals.
(1993) The effect of temperature and salt contamination on corrosion of reinforcing steel in OPC and blended cement concretes. Masters thesis, King Fahd University of Petroleum and Minerals.
(1989) Performance of Epoxy-injected concrete in hot weather conditions. Masters thesis, King Fahd University of Petroleum and Minerals.
(2000) Performance evaluation of concrete coatings. Masters thesis, King Fahd University of Petroleum and Minerals.
(1997) Predicting short-duration, high-intensity rainfall in Saudi Arabia. Masters thesis, King Fahd University of Petroleum and Minerals.
(1998) Fracture toughness investigation of an indigenous limestone rock formation. Masters thesis, King Fahd University of Petroleum and Minerals.
(1989) Load induced cracking and failure of concrete deck slabs in girder-slab type bridges. Masters thesis, King Fahd University of Petroleum and Minerals.
(2003) Study of reaction kinetics of a submerged membrane activated sludge process. PhD thesis, King Fahd University of Petroleum and Minerals.
(1997) Validation and improvement of rear-end traffic conflict model for safety evaluation of coordinated signal systems. Masters thesis, King Fahd University of Petroleum and Minerals.
(1997) Removal of microorganisms through slow sand filtration of chlorinated vs. nonchlorinated secondary effluents. Masters thesis, King Fahd University of Petroleum and Minerals.
(1989) Use of microtubes in the design of optimized trickle irrigation network. Masters thesis, King Fahd University of Petroleum and Minerals.
(1996) Performance evaluation of concrete surface treatment materials. Masters thesis, King Fahd University of Petroleum and Minerals.
(1991) Mechanisms of high durability performance of plain and blended cements. PhD thesis, King Fahd University of Petroleum and Minerals.
(1989) Investigation of leachate from a sanitary landfill in Saudi Arabia. Masters thesis, King Fahd University of Petroleum and Minerals.
(1992) Flexure and shear behaviour of damaged RC beams repaired by plate bonding. Masters thesis, King Fahd University of Petroleum and Minerals.
(1992) Optimal design of reinforced concrete frames. Masters thesis, King Fahd University of Petroleum and Minerals.
(1992) Biological treatment of hazardous contaminants in sequencing batch reacors. Masters thesis, King Fahd University of Petroleum and Minerals.
(2002) Evaluation of load transfer in axially loaded repaired concrete columns. Masters thesis, King Fahd University of Petroleum and Minerals.
(1991) Characerization of expansive soils in the Eastern Province of Saudi Arabia. Masters thesis, King Fahd University of Petroleum and Minerals.
(1998) Assesment of the geotechnical properties of stabilized sand-marl mixtures for constructional purposes. Masters thesis, King Fahd University of Petroleum and Minerals.
(1988) Study of various repair methods for reinforced concrete flexural members. Masters thesis, King Fahd University of Petroleum and Minerals.
(1992) Strengthening of damaged reinforced concrete beams by external fiber glass plates. Masters thesis, King Fahd University of Petroleum and Minerals.
(1988) Geotechnical properties of the surfacial soil of Sana'a The Yemen Arab Republic. Masters thesis, King Fahd University of Petroleum and Minerals.
(1985) Concrete mix design for hot weather. Masters thesis, King Fahd University of Petroleum and Minerals.
(1982) The Influence function technique in the numerical analysis of plate bending of arbitrary plan form. Masters thesis, King Fahd University of Petroleum and Minerals.
(1993) Experimental investigation of microbial growth in subsurface environment. Masters thesis, King Fahd University of Petroleum and Minerals.
(2000) Iterative coupling of boundary and finite element methods. PhD thesis, King Fahd University of Petroleum and Minerals.
(1995) Bond and durability of fusion-bonded epoxy-coated steel bars. Masters thesis, King Fahd University of Petroleum and Minerals.
(1996) Polymer modification of Arab Asphalt to Suit Gulf Countries' performance requirements. PhD thesis, King Fahd University of Petroleum and Minerals.
(1990) Durability of reinforced concrete beams repaired with various repair materials. Masters thesis, King Fahd University of Petroleum and Minerals.
(1990) Studying the behavior of Dhahran dune sand using the 3rd invariant stress dependent combined hardening cap model. Masters thesis, King Fahd University of Petroleum and Minerals.
(1998) Elastic plastic analysis of semi-rigid industrial frames. PhD thesis, King Fahd University of Petroleum and Minerals.
(1990) Assessment of concrete strength by lok and capo tests. Masters thesis, King Fahd University of Petroleum and Minerals.
(1996) Numerical modeling of RC slabs on tensionless elastic subgrade. Masters thesis, King Fahd University of Petroleum and Minerals.
(2000) Analysis and design of buried pipelines. Masters thesis, King Fahd University of Petroleum and Minerals.
(1997) Quantifying crude oil spill volume in homogeneous and layered porous media from product thickness in monitoring wells. Masters thesis, King Fahd University of Petroleum and Minerals.
(1995) Laboratory evaluation of hedmanite and lime modified asphalt concrete mixes. Masters thesis, King Fahd University of Petroleum and Minerals.
(2000) Analysis of laminated general shells undergoing finite rotations and large motion. PhD thesis, King Fahd University of Petroleum and Minerals.
(2005) A prediction model for the residual flexural strength of corroded reinforced concrete beams. Masters thesis, King Fahd University of Petroleum and Minerals.
(1996) Chemical stabilization of Al-Qurrayyah Eastern Saudi Sabkha soil. Masters thesis, King Fahd University of Petroleum and Minerals.
(1996) Unsteady hydrodynamic forces on spheroidal bodies. PhD thesis, King Fahd University of Petroleum and Minerals.
(1992) Numerical simulation of groundwater in the Umm Er Radhuma Aquifer at Shadco project - Eastern Province. Masters thesis, King Fahd University of Petroleum and Minerals.
(2003) The Production of activated carbon from local palm-date pits for pollution removal process. Masters thesis, King Fahd University of Petroleum and Minerals.
(1995) Prediction of shear/peeling failure in plated R/C beams. Masters thesis, King Fahd University of Petroleum and Minerals.
(1995) Evaluation of thermal resistivity of soils in Saudi Arabia. Masters thesis, King Fahd University of Petroleum and Minerals.
(1996) Performance modeling of Arabian asphalt using HP-GPC chromatography. PhD thesis, King Fahd University of Petroleum and Minerals.
(1995) Computational Modelling of shrinkage in repaired concrete. Masters thesis, King Fahd University of Petroleum and Minerals.
(2003) Effects of aggregate quality on reinforcement corrosion. Masters thesis, King Fahd University of Petroleum and Minerals.
(1982) A Study of development and performance of sulphur-based construction blocks. Masters thesis, King Fahd University of Petroleum and Minerals.
(1987) Development of guidelines for four phase traffic signal scheme in the Kingdom of Saudi Arabia. Masters thesis, King Fahd University of Petroleum and Minerals.
(1985) Static strength properties of artificially cemented sands. Masters thesis, King Fahd University of Petroleum and Minerals.
(2004) Studies on soil-foundation interaction in the Sabkha environment of Eastern Saudi Arabia. Masters thesis, King Fahd University of Petroleum and Minerals.
(1996) Effects of oily sludge landforming on the soils environment. Masters thesis, King Fahd University of Petroleum and Minerals.
(1988) Dispersion of chloroform in a saturated porous media. Masters thesis, King Fahd University of Petroleum and Minerals.
(1980) A Three-dimensional photoelastic investigation of the stress distribution in the anchorage zone of post-tensioned beams. Masters thesis, King Fahd University of Petroleum and Minerals.
(1996) The effect of casting and curing temperatures on the properties of concrete. Masters thesis, King Fahd University of Petroleum and Minerals.
(1995) Effect of captive riders in intercity mode-choice modeling. Masters thesis, King Fahd University of Petroleum and Minerals.
(1992) Studies on soil-foundation interaction in the sabkha environment of Eastern Province of Saudi Arabia. PhD thesis, King Fahd University of Petroleum and Minerals.
(1985) Studies on the evaluation of permeability and corrosion resisting characteristics of Portland pozzolan concrete. Masters thesis, King Fahd University of Petroleum and Minerals.
(1995) Characterization and stabilization of Eastern Saudi Marls. Masters thesis, King Fahd University of Petroleum and Minerals.
(2002) Development of an equivalent dispersion coefficient for a complex contaminant transport model. Masters thesis, King Fahd University of Petroleum and Minerals.
(2005) Calibration of VISSIM to the traffic conditions of Khobar and Dammam, Saudi Arabia. Masters thesis, King Fahd University of Petroleum and Minerals.
(1987) Tertiary wastewater treatment by sedimantation and sand filtration. Masters thesis, King Fahd University of Petroleum and Minerals.
(1988) Engineering properties and mineralogical composition of expansive clays in Al-Qatif area (K.S.A). Masters thesis, King Fahd University of Petroleum and Minerals.
(1999) Interface frictional characteristics of non-woven geotextile - Sabkha and - sand using pull-out tests. Masters thesis, King Fahd University of Petroleum and Minerals.
(1993) Modeling of biological wastewater treatment in sequencing batch reactors. Masters thesis, King Fahd University of Petroleum and Minerals.
(1991) Criteria for cathodic protection of steel in concrete in the context of Arabian Gulf environment. PhD thesis, King Fahd University of Petroleum and Minerals.
(1979) Biparabolic isoparametric shell element : (a version of Ahmad element). Masters thesis, King Fahd University of Petroleum and Minerals.
(2005) A study of mix design and durability of self compacting concrete. Masters thesis, King Fahd University of Petroleum and Minerals.
(1978) Optimization of Concrete strength using local aggregates from the Eastern Province of Saudi Arabia. Masters thesis, King Fahd University of Petroleum and Minerals.
(2000) An Investigation of corrosion of steel reinforcement in concrete in the Eastern Province of Saudi Arabia. Masters thesis, King Fahd University of Petroleum and Minerals.
(1993) Effect of dissolved oxygen on activated carbon uptake. PhD thesis, King Fahd University of Petroleum and Minerals.
(1987) Removal of iron and manganese with ozone. Masters thesis, King Fahd University of Petroleum and Minerals.
(1988) Parking problem of Arafat. Masters thesis, King Fahd University of Petroleum and Minerals.
(1992) Effect of dissolved oxygen on the adsorptive capacity of a granular activated charcoal for phenol and O-Cresol. Masters thesis, King Fahd University of Petroleum and Minerals.
(1982) Electrical resistivity of concrete in relation to corrosion of reinforcement. Masters thesis, King Fahd University of Petroleum and Minerals.
(1988) Analysis of horizontally curved pseudo slab type bridge deck continuous over discrete pier supports. Masters thesis, King Fahd University of Petroleum and Minerals.
(1989) Tertiary treatment of municipal sewage via slow sand filtration. Masters thesis, King Fahd University of Petroleum and Minerals.
(1987) Effect of sight distance on the safety of unsignalized intersections. Masters thesis, King Fahd University of Petroleum and Minerals.
(1985) Recycling of deteriorated asphalt pavements. Masters thesis, King Fahd University of Petroleum and Minerals.
(1997) Developing behavioral models for driver gap acceptance at priority intersections. PhD thesis, King Fahd University of Petroleum and Minerals.
(1982) Buckling of multiple braced columns. Masters thesis, King Fahd University of Petroleum and Minerals.
(2002) Plastic shrinkage cracking of blended cement concretes under hot weather conditions. Masters thesis, King Fahd University of Petroleum and Minerals.
(1991) Non-linear finite element modelling of reinforced concrete slabs. PhD thesis, King Fahd University of Petroleum and Minerals.
(1988) Fracture and permeability characteristics of thermally degraded concrete. Masters thesis, King Fahd University of Petroleum and Minerals.
(2003) Causes of female teacher work trip accidents in the Kingdom of Saudi Arabia. Masters thesis, King Fahd University of Petroleum and Minerals.
(1981) The effects of baghouse fines and mineral fillers on asphalt mix properties in the Eastern Province of Saudi Arabia. Masters thesis, King Fahd University of Petroleum and Minerals.
(0007) Progressive fracture of reinforced deck slab in girder-slab type bridge deck. Masters thesis, King Fahd University of Petroleum and Minerals.
(1997) Microbial evaluation of Al-Khobar wastewater treatment plants. Masters thesis, King Fahd University of Petroleum and Minerals.
(1998) Continuum damage model for compressive fatigue of high strength concrete. Masters thesis, King Fahd University of Petroleum and Minerals.
(1996) Plastic shrinkage cracking in hot weather conditions. Masters thesis, KFUPM.
(1986) Progressive fracture of reinforced deck slab in girder-slab type bridge deck. Masters thesis, KFUPM.
(1996) Protection of reinforced concrete using corrosion inhibitors and coatings. Masters thesis, KFUPM.
(1992) Strengthening of damaged reinforced concrete beams by external fiber glass plates. Masters thesis, KFUPM.
(1985) Studies on the evaluation of permeability and corrosion resisting characteristics of Portland pozzolan concrete. Masters thesis, KFUPM.
(1988) Study of various repair methods for reinforced concrete flexural members. Masters thesis, KFUPM.
(1996) The effect of casting and curing temperatures on the properties of concrete. Masters thesis, KFUPM.
(1993) The effect of temperature and salt contamination on corrosion of reinforcing steel in OPC and blended cement concretes. Masters thesis, KFUPM.
(1982) The Influence function technique in the numerical analysis of plate bending of arbitrary plan form. Masters thesis, KFUPM.
(1994) Three dimensional finite element analysis of brittle materials using CDM model. Masters thesis, KFUPM.
(1995) Use of small diameter cores in evaluation of in-situ concrete strength in Eastern Saudi Arabia. Masters thesis, KFUPM.
(2002) Plastic shrinkage cracking of blended cement concretes under hot weather conditions. Masters thesis, KFUPM.
(1995) Prediction of shear/peeling failure in plated R/C beams. Masters thesis, KFUPM.
(1995) Optimization of continuous post-tensioned bridge decks of prescribed lengths. Masters thesis, KFUPM.
(1991) Optimum design of continuous partially prestressed concrete beams. Masters thesis, KFUPM.
(2007) Optimum design of mat foundation. Masters thesis, KFUPM.
(1982) Performance of pozzolan cement concrete in a high chloride-sulphate environment. Masters thesis, KFUPM.
(2005) RBF-based meshless method for the analysis of thin elastic plates undergoing large deflections. Masters thesis, KFUPM.
(1994) Reduction in bond and the strength of slabs due to corrosion of reinforcement. Masters thesis, KFUPM.
(1982) Stability analysis of orthotropic plates by a mixed complementary energy method. Masters thesis, KFUPM.
(1985) Static analysis of horizontally curved bridge decks supported by flexible multi-girders. Masters thesis, KFUPM.
(1975) Strain survey on a small plate with a circular hole in the center. Masters thesis, KFUPM.
(1984) Strength of reinforced concrete beams in hot weather. Masters thesis, KFUPM.
(1988) Study of the effect of rust and corrosion of reinforcement on bond behavior. Masters thesis, KFUPM.
(1988) Study of the effect of rust and corrosion of reinforcemnt on bond behaviour. Masters thesis, KFUPM.
Cost of solar energy generated using PV panels. In: Cost of solar energy generated using PV panels.
A repair strategy for corrosion damaged concrete. In: A repair strategy for corrosion damaged concrete.
Performance of corrosion resisting steels in chloride-bearing concrete. Performance of corrosion resisting steels in chloride-bearing concrete.
(1996) Numerical modeling of RC slabs on tensionless elastic subgrade. Masters thesis, KFUPM.
(1992) Optimal design of reinforced concrete frames. Masters thesis, KFUPM.
(1978) Optimization of Concrete strength using local aggregates from the Eastern Province of Saudi Arabia. Masters thesis, KFUPM.
(1997) Optimization of parabolic steel box arches. Masters thesis, KFUPM.
(2000) Performance evaluation of concrete coatings. Masters thesis, KFUPM.
(1996) Performance evaluation of concrete surface treatment materials. Masters thesis, KFUPM.
(1989) Performance of Epoxy-injected concrete in hot weather conditions. Masters thesis, KFUPM.
(1998) Performance optimization and modeling of slurry seal and micro surfacing utilizing steel slag aggregates. Masters thesis, KFUPM.
Influence of cement composition on the corrosion of reinforcement and sulfate resistance of concrete. Influence of cement composition on the corrosion of reinforcement and sulfate resistance of concrete.
(1989) Load induced cracking and failure of concrete deck slabs in girder-slab type bridges. Masters thesis, KFUPM.
(1992) Nonlinear behavior of cylinder-plate junction on tensionless elastic subgrade. Masters thesis, KFUPM.
TOWARD SOLVING THE CONCRETE DETERIORATION PROBLEM IN THE GULF REGION. TOWARD SOLVING THE CONCRETE DETERIORATION PROBLEM IN THE GULF REGION..
Performance of plain and blended cements exposed to varying concentrations of sodium sulphate. Performance of plain and blended cements exposed to varying concentrations of sodium sulphate.
(2003) Influence of temperature and wind on moisture transport in cementitious materials. Masters thesis, KFUPM.
Performance of plain and blended cements exposed to high sulphate concentrations. Performance of plain and blended cements exposed to high sulphate concentrations.
Effect of chloride concentration in soil on reinforcement corrosion. Effect of chloride concentration in soil on reinforcement corrosion.
29Si MAS-NMR study of hydrated cement paste and mortar with varying content of fly ash. 29Si MAS-NMR study of hydrated cement paste and mortar with varying content of fly ash.
(2002) Evaluation of load transfer in axially loaded repaired concrete columns. Masters thesis, KFUPM.
(1992) Flexure and shear behaviour of damaged RC beams repaired by plate bonding. Masters thesis, KFUPM.
(1988) Fracture and permeability characteristics of thermally degraded concrete. Masters thesis, KFUPM.
(2005) Improving the performance of damaged FBECR in chloride-contaminated concrete. Masters thesis, KFUPM.
Inhibition of atmospheric corrosion of mild steel by sodium dihydrogen orthophosphate treatment. Inhibition of atmospheric corrosion of mild steel by sodium dihydrogen orthophosphate treatment.
Effect of inhibitor treatment on corrosion of steel in a salt solution. Effect of inhibitor treatment on corrosion of steel in a salt solution.
Mechanical properties and durability characteristics of polymer- and cement-based repair materials. Mechanical properties and durability characteristics of polymer- and cement-based repair materials.
Sulfate resistance of plain and blended cements exposed to varying concentrations of sodium sulfate. Sulfate resistance of plain and blended cements exposed to varying concentrations of sodium sulfate.
Effect of steel manufacturing process and atmospheric corrosion on the corrosion-resistance of steel bars in concrete. Effect of steel manufacturing process and atmospheric corrosion on the corrosion-resistance of steel bars in concrete.
Effect of rebar cleanliness and repair materials on reinforcement corrosion and flexural strength of repaired concrete beams. Effect of rebar cleanliness and repair materials on reinforcement corrosion and flexural strength of repaired concrete beams.
Effect of waterproofing coatings on steel reinforcement corrosion and physical properties of concrete. Effect of waterproofing coatings on steel reinforcement corrosion and physical properties of concrete.
Effect of environmental pre-conditioning on bond of FRP reinforcement to concrete. Effect of environmental pre-conditioning on bond of FRP reinforcement to concrete.
Evaluation of bond using FRP rods with axisymmetric deformations. Evaluation of bond using FRP rods with axisymmetric deformations.
Effect of Cyclic Loading on Bond Behavior of GFRP Rods Embedded in Concrete Beams. Effect of Cyclic Loading on Bond Behavior of GFRP Rods Embedded in Concrete Beams.
29Si MAS-NMR study of hydrated cement paste and mortar made with and without silica fume. 29Si MAS-NMR study of hydrated cement paste and mortar made with and without silica fume.
Geometries and energy separations of electronic states of GeF2, SnF2, and PbF2 and their positive ions. Geometries and energy separations of electronic states of GeF2, SnF2, and PbF2 and their positive ions.
Use of polypropylene fibers to enhance deterioration resistance of concrete surface skin subjected to cyclic wet/dry sea water exposure. Use of polypropylene fibers to enhance deterioration resistance of concrete surface skin subjected to cyclic wet/dry sea water exposure.
Corrosion of steel reinforcement in polypropylene fiber reinforced concrete structures. Corrosion of steel reinforcement in polypropylene fiber reinforced concrete structures.
EFFECT OF POLYPROPYLENE FIBER REINFORCEMENT ON THE PROPERTIES OF FRESH AND HARDENED CONCRETE IN THE ARABIAN GULF ENVIRONMENT. EFFECT OF POLYPROPYLENE FIBER REINFORCEMENT ON THE PROPERTIES OF FRESH AND HARDENED CONCRETE IN THE ARABIAN GULF ENVIRONMENT..
(1982) Electrical resistivity of concrete in relation to corrosion of reinforcement. Masters thesis, KFUPM.
(1995) Elasto-plastic collapse load analysis of single mitred bends. Masters thesis, KFUPM.
(2003) Effects of aggregate quality on reinforcement corrosion. Masters thesis, KFUPM.
(1990) Durability of reinforced concrete beams repaired with various repair materials. Masters thesis, KFUPM.
(1998) Continuum damage model for compressive fatigue of high strength concrete. Masters thesis, KFUPM.
(1985) Concrete mix design for hot weather. Masters thesis, KFUPM.
(1983) Sulfur infiltrated concrete box sections with poly styrene core as panel units. Masters thesis, KFUPM.
(1989) Use of latex modified concrete as a bridge deck overlay. Masters thesis, KFUPM.
(2005) A prediction model for the residual flexural strength of corroded reinforced concrete beams. Masters thesis, KFUPM.
(1982) A Study of development and performance of sulphur-based construction blocks. Masters thesis, KFUPM.
(2005) A study of mix design and durability of self compacting concrete. PhD thesis, KFUPM.
(1980) A Three-dimensional photoelastic investigation of the stress distribution in the anchorage zone of post-tensioned beams. Masters thesis, KFUPM.
(1981) An Investigation of corrosion of steel reinforcement in concrete in the Eastern Province of Saudi Arabia. Masters thesis, KFUPM.
(1995) Computational Modelling of shrinkage in repaired concrete. Masters thesis, KFUPM.
(2000) Analysis and design of buried pipelines. Masters thesis, KFUPM.
(1988) Analysis of horizontally curved pseudo slab type bridge deck continuous over discrete pier supports. Masters thesis, KFUPM.
(1990) Assessment of concrete strength by lok and capo tests. Masters thesis, KFUPM.
(1995) Bond and durability of fusion-bonded epoxy-coated steel bars. Masters thesis, KFUPM.
(1995) Boundary element analysis of nonprismatic beams and plates. Masters thesis, KFUPM.
(1982) Buckling of multiple braced columns. Masters thesis, KFUPM.
(1994) Chloride diffusion in concrete/prediction of the onset of corrosion in reinforced concrete structures. Masters thesis, KFUPM.
Engineering_Certification_Academic_Concerns_and_Industry_needs_Mosaed_Al-Garni_SABIC_Jubail. In: Engineering_Certification_Academic_Concerns_and_Industry_needs_Mosaed_Al-Garni_SABIC_Jubail.
Confidence_and_Uncertainty_in_Groundwater_Contaminant_Transport_Dr_Adrian_Butler_Imperial_College_London_UK. In: Confidence_and_Uncertainty_in_Groundwater_Contaminant_Transport_Dr_Adrian_Butler_Imperial_College_London_UK.
MATERIALS_FOR_THE_REPAIR_AND_STRENGTHENING_OF_CONCRETE_STRUCTURES_THE_INFLUENCE_OF_MATERIAL_PROPERTIES_ON_STRUCTURAL_PERFOR. In: MATERIALS_FOR_THE_REPAIR_AND_STRENGTHENING_OF_CONCRETE_STRUCTURES_THE_INFLUENCE_OF_MATERIAL_PROPERTIES_ON_STRUCTURAL_PERFOR.
THE_USE_OF_A_LOCAL_SOIL_IN_ENVIRONMENTAL_ENGINEERING_PROCESSES_Nabil_Abuzaid_Muhammad_Al-Malack. In: THE_USE_OF_A_LOCAL_SOIL_IN_ENVIRONMENTAL_ENGINEERING_PROCESSES_Nabil_Abuzaid_Muhammad_Al-Malack.
THE_FUNDAMENTALS_OF_ENGINEERING_EXAMINATION_THE_FIRST_STEP_FOR_THE_PROFESSIONAL_LICENSING_Dr-Omar-A-Al-Suwailem. In: THE_FUNDAMENTALS_OF_ENGINEERING_EXAMINATION_THE_FIRST_STEP_FOR_THE_PROFESSIONAL_LICENSING_Dr-Omar-A-Al-Suwailem.
INDICES_FOR_PREDICTION_OF_REPAIR_MORTAR_PERFORMANCE. In: INDICES_FOR_PREDICTION_OF_REPAIR_MORTAR_PERFORMANCE.
BLISTERING_OF_EPOXY_COATING_ON_CONCRETE_FLOOR. In: BLISTERING_OF_EPOXY_COATING_ON_CONCRETE_FLOOR.
Concrete_Durability_The_Arabiab_Gulf_Experience_Mohammed_Maslehuddin. In: Concrete_Durability_The_Arabiab_Gulf_Experience_Mohammed_Maslehuddin.
TEMPERATURE_IMPACT_ON_PAVEMENT_STRUCTURES_IN_HOT_ARID_ENVIRONMENT_Hamad_Al-abdul-Wahhab_Rezqallah_Ramadhan_and_Ibrahim_M. In: TEMPERATURE_IMPACT_ON_PAVEMENT_STRUCTURES_IN_HOT_ARID_ENVIRONMENT_Hamad_Al-abdul-Wahhab_Rezqallah_Ramadhan_and_Ibrahim_M.
Performance_of_Concrete_in_Aggressive_Environments. In: Performance_of_Concrete_in_Aggressive_Environments.
EXPERIENCES_WITH_REHABILITATION_OPTIONS_FOR_CONCRETE_STRUCTURES_IN_MADINAT_AL-JUBAIL_AL-SINAIYAH. In: EXPERIENCES_WITH_REHABILITATION_OPTIONS_FOR_CONCRETE_STRUCTURES_IN_MADINAT_AL-JUBAIL_AL-SINAIYAH.
OVERVIEW_OF_LOCAL_STATE_OF_THE_ENVIRONMENT_Ibrahim_A_Alam_Vice_Mayor_Jeddah_Municipality. In: OVERVIEW_OF_LOCAL_STATE_OF_THE_ENVIRONMENT_Ibrahim_A_Alam_Vice_Mayor_Jeddah_Municipality.
ROLE_OF_CONSTRUCTION_CHEMICALS_IN_CONCRETE_PROTECTION. In: ROLE_OF_CONSTRUCTION_CHEMICALS_IN_CONCRETE_PROTECTION.
Performance_of_Retrofitted_Concrete_Using_FRP. In: Performance_of_Retrofitted_Concrete_Using_FRP.
PROPERTIES_AND_BEHAVIOR_OF_ARID_CLIMATE_SOIL_DEPOSITS_IN_KUWAIT_Nabil_F_Ismael_Kuwait_University. In: PROPERTIES_AND_BEHAVIOR_OF_ARID_CLIMATE_SOIL_DEPOSITS_IN_KUWAIT_Nabil_F_Ismael_Kuwait_University.
THE_SHEAR_STRENGTHENING_OF_RECTANGULAR_REINFORCED_CONCRETE_BEAMS_USING_BONDED_EXTERNAL_REINFORCEMENT. In: THE_SHEAR_STRENGTHENING_OF_RECTANGULAR_REINFORCED_CONCRETE_BEAMS_USING_BONDED_EXTERNAL_REINFORCEMENT.
ENVIRONMENT_DIFFERENCES_IN_GULF_COUNTRIES-EFFECTS_ON_CONCRETE_PRACTICE_Habib_M_Lein_Al-Abideen_Deputy_Minister_for_Public_Works_Saudi_Arabia. In: ENVIRONMENT_DIFFERENCES_IN_GULF_COUNTRIES-EFFECTS_ON_CONCRETE_PRACTICE_Habib_M_Lein_Al-Abideen_Deputy_Minister_for_Public_Works_Saudi_Arabia.
WASTEWATER_IRRIGATION_AND_PHYSICO-CHEMICAL_CHANGES_IN_SOILS_Muhammad_Sadiq_and_G_Hussain_KFUPM_KAACST. In: WASTEWATER_IRRIGATION_AND_PHYSICO-CHEMICAL_CHANGES_IN_SOILS_Muhammad_Sadiq_and_G_Hussain_KFUPM_KAACST.
CHLORIDE_DIFFUSION_IN_CONCRETE_AND_ITS_IMPACT_ON_CORROSION_OF_REINFORCEMENT. In: CHLORIDE_DIFFUSION_IN_CONCRETE_AND_ITS_IMPACT_ON_CORROSION_OF_REINFORCEMENT.
CONCRETE_PERMEABILITY_A_REVIEW_OF_PROCESSES_AND_MECHANISMS. In: CONCRETE_PERMEABILITY_A_REVIEW_OF_PROCESSES_AND_MECHANISMS.
(1987) A model study of slurry-trench excavation and soil-bentonite cut-off walls. Masters thesis, KFUPM.
SLOW_SAND_FILTRATION_MICROBIAL_REMOVALS_IN_PRE-CHLORINATED_SECONDARY_EFFLUENT_Shaukat_Farooq_and_Syed_Imran. In: SLOW_SAND_FILTRATION_MICROBIAL_REMOVALS_IN_PRE-CHLORINATED_SECONDARY_EFFLUENT_Shaukat_Farooq_and_Syed_Imran.
CONTAMINANT_REMOVALS_USING_WASTEWATER_RECHARGE_Achi_Ishaq_Amir_Khan_Mohammad_Al-Suwaiyan_Shaukat Farooq_and_Saad_Aiban. In: CONTAMINANT_REMOVALS_USING_WASTEWATER_RECHARGE_Achi_Ishaq_Amir_Khan_Mohammad_Al-Suwaiyan_Shaukat Farooq_and_Saad_Aiban.
ESTIMATING_UNDER_GROUND_HYDROCARBON_SPILLS_IN_HOMOGENEOUS_AND_LAYERED_SOILS_Mohammad_Al-Suwaiyan_and_Khalid_Bashir. In: ESTIMATING_UNDER_GROUND_HYDROCARBON_SPILLS_IN_HOMOGENEOUS_AND_LAYERED_SOILS_Mohammad_Al-Suwaiyan_and_Khalid_Bashir.
Existing_Worldwide_Certification_Legislation_and_Saudi_Arabian_Integration_Richard_Martin_Saudi_Arabian_Local_Association. In: Existing_Worldwide_Certification_Legislation_and_Saudi_Arabian_Integration_Richard_Martin_Saudi_Arabian_Local_Association.
TEXAS_NATURAL_RESOURCES_CONSERVATION_COMMISSION_PROTOCOLS_FOR_CONDUCTING_RISK-BASED_ASSESSMENTS_AT_LEAKING_PETROLEUM_STORAGE_TANK_SITES_Mahbub. In: TEXAS_NATURAL_RESOURCES_CONSERVATION_COMMISSION_PROTOCOLS_FOR_CONDUCTING_RISK-BASED_ASSESSMENTS_AT_LEAKING_PETROLEUM_STORAGE_TANK_SITES_Mahbub.
Reliable_Assessment_of_Deteriorating_Structures. In: Reliable_Assessment_of_Deteriorating_Structures.
POLLUTANT_DISTRIBUTION_IN_A_SHALLOW_AQUIFER_IN_THE_EASTERN_PROVINCE_OF_SAUDI_ ARABI_Inhammad_Sadiq_and_Alarii_KFUPM_Jeddah_Municipality. In: POLLUTANT_DISTRIBUTION_IN_A_SHALLOW_AQUIFER_IN_THE_EASTERN_PROVINCE_OF_SAUDI_ ARABI_Inhammad_Sadiq_and_Alarii_KFUPM_Jeddah_Municipality.
MECHANISMS_OF_SULFATE_ATTACK_IN_PLAIN _AND_BLENDED_CEMENTS_A_REVIEW. In: MECHANISMS_OF_SULFATE_ATTACK_IN_PLAIN _AND_BLENDED_CEMENTS_A_REVIEW.
EFFECT_OF_ENVIRONMENTAL_CONDITIONING_ON_BOND_BETWEEN_COMMERICAL_FRP_RODS_AND_CONCRETE. In: EFFECT_OF_ENVIRONMENTAL_CONDITIONING_ON_BOND_BETWEEN_COMMERICAL_FRP_RODS_AND_CONCRETE.
Potential_Applications_of_Prompt_Gamma_Neutron_Activation_in_the_Nondestructive_Testing_of_Concrete_Structures. In: Potential_Applications_of_Prompt_Gamma_Neutron_Activation_in_the_Nondestructive_Testing_of_Concrete_Structures.
PREDICTION_OF_CREEP_AND_SHRINKAGE_OF_CONCRETE. In: PREDICTION_OF_CREEP_AND_SHRINKAGE_OF_CONCRETE.
ENVIRONMENTAL_IMPACTS_ON_FLEXIBLE_PAVEMENTS_IN_JEDDAH_CITY_Sabry_Ahmad_Shihata_Zaki_Abdullah_Baghdadi_KAU. In: ENVIRONMENTAL_IMPACTS_ON_FLEXIBLE_PAVEMENTS_IN_JEDDAH_CITY_Sabry_Ahmad_Shihata_Zaki_Abdullah_Baghdadi_KAU.
IMPORTANCE_OF_CERTIFICATION_OF_THOSE_INVOLVED_IN_BUILDING_INDUSTRY_Dr-Osama-Magdy-Shawa_ENTECHS_Saudi_Arabia. In: IMPORTANCE_OF_CERTIFICATION_OF_THOSE_INVOLVED_IN_BUILDING_INDUSTRY_Dr-Osama-Magdy-Shawa_ENTECHS_Saudi_Arabia.
DEVELOPMENT_OF_SELF-COMPACTING_AND_LOW_HEAT_HIGH_PERFORMANCE_CONCRETE. In: DEVELOPMENT_OF_SELF-COMPACTING_AND_LOW_HEAT_HIGH_PERFORMANCE_CONCRETE.
WATER_TABLE_RISE_AND_CONCRETE_DETERIORATION_IN_THE_SUBSURFACE_ENVIRONMENT. In: WATER_TABLE_RISE_AND_CONCRETE_DETERIORATION_IN_THE_SUBSURFACE_ENVIRONMENT.
Improvement_of_concrete_serviceability_in_hot_Weather_Environment_Dr-Wajahat_Mirza_and_Dr-Alan_Swann_CIC_Jeddah. In: Improvement_of_concrete_serviceability_in_hot_Weather_Environment_Dr-Wajahat_Mirza_and_Dr-Alan_Swann_CIC_Jeddah.
NEW_GENERATION_OF_SUPERPLASTICIZERS_FOR_HIGH_PERFORMANCE_CONCRETE. In: NEW_GENERATION_OF_SUPERPLASTICIZERS_FOR_HIGH_PERFORMANCE_CONCRETE.
CATEGORIZATION_OF_DAMAGES_TO_CONCRETE_HIGHWAY_BRIDGES. In: CATEGORIZATION_OF_DAMAGES_TO_CONCRETE_HIGHWAY_BRIDGES.
CHLORIDE_DIFFUSION_AND_CORROSION_ACTIVITY_MODELLING_THE_EFFECT_OF_BINDER_TYPE_AND_CONTENT. In: CHLORIDE_DIFFUSION_AND_CORROSION_ACTIVITY_MODELLING_THE_EFFECT_OF_BINDER_TYPE_AND_CONTENT.
Contaminant_Water_Movement_in_Unsaturated_Soil_Some_Recent_ Studies_Saud_Gutub_and_Salah-Eldin_Awadallah_KAAU. In: Contaminant_Water_Movement_in_Unsaturated_Soil_Some_Recent_ Studies_Saud_Gutub_and_Salah-Eldin_Awadallah_KAAU.
(1985) Deformation of cohesionless soils under repeated loading. Masters thesis, KFUPM.
MECHANICAL_PROPERTIES_AND_DURABILITY_OF_HIGH_PERFORMANCE_PROTECRETE_CONCRETE. In: MECHANICAL_PROPERTIES_AND_DURABILITY_OF_HIGH_PERFORMANCE_PROTECRETE_CONCRETE.
Susceptibility_of_Limestones_to_Diagenesis_and_Weathering_Processes_Abdel-Latif_Qahwash_KFUPM. In: Susceptibility_of_Limestones_to_Diagenesis_and_Weathering_Processes_Abdel-Latif_Qahwash_KFUPM.
Microsilica_Concrete_Towards_2000_in_the_Arabian_Gulf_environment. In: Microsilica_Concrete_Towards_2000_in_the_Arabian_Gulf_environment.
GROUNDWATER_MODELING_IN_ENVIRONMENTAL_STUDIES_A_N_Khondaker_M_Al-Suwaiyan_Mohammed_and_R_Allayla. In: GROUNDWATER_MODELING_IN_ENVIRONMENTAL_STUDIES_A_N_Khondaker_M_Al-Suwaiyan_Mohammed_and_R_Allayla.
Unsaturated_Soil_Problem_in_the_Kingdom_of_Saudi_Arabia_Sahel_Abduljawad. In: Unsaturated_Soil_Problem_in_the_Kingdom_of_Saudi_Arabia_Sahel_Abduljawad.
MOISTURE_CONTROL_ON_VOLUME_STABILITY_IN. In: MOISTURE_CONTROL_ON_VOLUME_STABILITY_IN.
COMPATIBILITY_OF_CLAYS_IN_DIFFERENT_CHEMICAL_ENVIRONMENTS_A_REVIEW. In: COMPATIBILITY_OF_CLAYS_IN_DIFFERENT_CHEMICAL_ENVIRONMENTS_A_REVIEW.
DETERIORATION_AND_NONDESTRUCTIVE_EVALUATION_OF_CONCRETE. In: DETERIORATION_AND_NONDESTRUCTIVE_EVALUATION_OF_CONCRETE.
Corrosion_of_Reinforced_Concrete_Advances_in_Remedial_Treatment_by_Cathodic_Protection_CLPage_Aston_University_UK. In: Corrosion_of_Reinforced_Concrete_Advances_in_Remedial_Treatment_by_Cathodic_Protection_CLPage_Aston_University_UK.
USE_OF_ROCKDUST_FOR_ENHANCING_DURABILITY_OF_CONCRETE. In: USE_OF_ROCKDUST_FOR_ENHANCING_DURABILITY_OF_CONCRETE.
(1988) Constitutive modelling of Dhahran dune sand using cap model. Masters thesis, kfupm.
(1987) Creep characteristics of local sands. Masters thesis, KFUPM.
(1997) Effect of gypsum-anhydrite on the behavior of expansive clays. Masters thesis, KFUPM.
(1997) Improvement of Eastern Saudi sabkha soils for road construction. Masters thesis, KFUPM.
(1997) Improvement of Eastern Saudi sabkha soils for road construction. Masters thesis, KFUPM.
Prediction_of_Shrinkage_and_Creep_Stresses_in_Concrete_Repair_Systems_Ali_Al-Gadhib_M-K-Rahman_and_M-Baluch. In: Prediction_of_Shrinkage_and_Creep_Stresses_in_Concrete_Repair_Systems_Ali_Al-Gadhib_M-K-Rahman_and_M-Baluch.
Testing_of_Treated_Effluent_for_use_in_Mixing_and_Curing_of_Concrete_H-Saricimen_M-Shameem_M-Barry_and_M-Ibrahim. In: Testing_of_Treated_Effluent_for_use_in_Mixing_and_Curing_of_Concrete_H-Saricimen_M-Shameem_M-Barry_and_M-Ibrahim.
CONCRETE_CORROSION_INHIBITING_ADMIXTURES. In: CONCRETE_CORROSION_INHIBITING_ADMIXTURES.
DEMARCATION_OF_SABKHA_ZONES_FROM_REMOTE_SENSING_DATA_AND_ASSESSMENT_OF_THEIR_ENGINEERING_AND_A_Al-Saafin_A_M_Al-Sary_M-Asif_Khan_and_S_Abduljauwad. In: DEMARCATION_OF_SABKHA_ZONES_FROM_REMOTE_SENSING_DATA_AND_ASSESSMENT_OF_THEIR_ENGINEERING_AND_A_Al-Saafin_A_M_Al-Sary_M-Asif_Khan_and_S_Abduljauwad.
Durability_of_Reinforced_Concrete_in_Sulfate-Chloride_Sabkha_Media_and_Methods_of_Protection_Omar_Al-Amoudi. In: Durability_of_Reinforced_Concrete_in_Sulfate-Chloride_Sabkha_Media_and_Methods_of_Protection_Omar_Al-Amoudi.
Influence_of_Arabian_Gulf_Environment_oc_Durability_of_reinforced_concrete_A_Al-Rabiah_Saudi_COWI-Consult_and_Partner. In: Influence_of_Arabian_Gulf_Environment_oc_Durability_of_reinforced_concrete_A_Al-Rabiah_Saudi_COWI-Consult_and_Partner.
An_Opinion_Survey_on_Certification_of_Civil_Engineers_in_Saudi_Arabia_A-K-Azad_I-Asi_Naser-Al-Shayea-Saleh-Al-Suwaiyan-Huseein. In: An_Opinion_Survey_on_Certification_of_Civil_Engineers_in_Saudi_Arabia_A-K-Azad_I-Asi_Naser-Al-Shayea-Saleh-Al-Suwaiyan-Huseein.
ENVIRONMENTAL_CONSIDERATION_FOR_THE_USE_OF_EPOXY-COATED_REBARS_IN_TIIE_GULF_REGION. In: ENVIRONMENTAL_CONSIDERATION_FOR_THE_USE_OF_EPOXY-COATED_REBARS_IN_TIIE_GULF_REGION.
Environment-Induced_Damage_in_Concrete_Bridges_A-k-Azad. In: Environment-Induced_Damage_in_Concrete_Bridges_A-k-Azad.
(2001) Plasto-damage model for stress-strain behavior of soil. Masters thesis, KFUPM.
(1992) Studies on soil-foundation interaction in the sabkha environment of Eastern Province of Saudi Arabia. PhD thesis, KFUPM.
(2000) The Interaction between soil and buried bent pipelines. Masters thesis, KFUPM.
(1990) Studying the behavior of Dhahran dune sand using the 3rd invariant stress dependent combined hardening cap model. Masters thesis, KFUPM.
(1998) Assesment of the geotechnical properties of stabilized sand-marl mixtures for constructional purposes. Masters thesis, KFUPM.
(2000) Behavior of laterally loaded pile group model in sand. Masters thesis, KFUPM.
(2005) Pullout capacity of block anchor in sand. Masters thesis, KFUPM.
(1988) Study of laterally loaded single pile model. Masters thesis, KFUPM.
(1995) Evaluation of thermal resistivity of soils in Saudi Arabia. Masters thesis, KFUPM.
(2001) Effect of gradation and testing procedures on the load carrying capacity of calcareous sediments. Masters thesis, KFUPM.
(1988) Geotechnical properties of the surfacial soil of Sanaa The Yemen Arab Republic. Masters thesis, KFUPM.
(1979) Uncertainty analysis in shear strength of soils and its application to stability of slope problems. Masters thesis, KFUPM.
(1998) Fracture toughness investigation of an indigenous limestone rock formation. Masters thesis, KFUPM.
(1991) Characerization of expansive soils in the Eastern Province of Saudi Arabia. Masters thesis, KFUPM.
(1995) Characterization and stabilization of Eastern Saudi Marls. Masters thesis, KFUPM.
(1997) Chemical stabilization of Al-Qurrayyah Eastern Saudi Sabkha soil. Masters thesis, KFUPM.
(1994) Swelling potential and treatment of expansive soil. Masters thesis, KFUPM.
(1999) Interface frictional characteristics of non-woven geotextile - Sabkha and - sand using pull-out tests. Masters thesis, KFUPM.
(1987) The assessment of degree of cementation in weakly to moderately cemented sands by the static cone penetrometer. Masters thesis, KFUPM.
(2004) Studies on soil-foundation interaction in the Sabkha environment of Eastern Saudi Arabia. Masters thesis, KFUPM.
(1982) Drivers' attitudes and their relationship to accident involvement in Saudi Arabia. Masters thesis, KFUPM.
(1985) Static strength properties of artificially cemented sands. Masters thesis, KFUPM.
(2005) Effect of rate of water table rise on LNAPL entrapment in uniform and well-graded sands. Masters thesis, KFUPM.
(1986) Assessment of road user charges in Saudi Arabia. Masters thesis, KFUPM.
(2000) Effects of geotextiles on the load-carrying capacity of pavements on Sabkha. Masters thesis, KFUPM.
(1988) Engineering properties and mineralogical composition of expansive clays in Al-Qatif area. Masters thesis, KFUPM.
(1988) Effect of degree of saturation, air voids and medium of attack on the durability of asphalt concrete mixes in Jeddah. Masters thesis, KFUPM.
(1986) Axle loads and pavement performance indicators for typical highways in Eastern Province. Masters thesis, KFUPM.
(2002) Characteristic study of catastrophic tire failure in Eastern Province of Saudi Arabia. Masters thesis, KFUPM.
(1985) Development of an effective patrol dispatching system for traffic police operations. Masters thesis, KFUPM.
(1987) Development of left-turn lane warrants for Saudi Arabia. Masters thesis, KFUPM.
(1989) Effect of using geotextiles on behavior of Sabkaha subgrades. Masters thesis, KFUPM.
(1985) Effect of vehicle dimensional characteristics on highway geometric design. Masters thesis, KFUPM.
(1985) Estimating the parking demand for mosques. Masters thesis, KFUPM.
(2007) Evaluating adequacy of traffic optimization models under local traffic conditions. Masters thesis, KFUPM.
(1990) Laboratory evaluation of reclaimed rubber-asphaltic concrete mixes. Masters thesis, KFUPM.
(1986) Evaluation of emulsified asphalt treated sand for road bases. Masters thesis, KFUPM.
(1997) Optimization of steel slag aggregates for bituminous mixes in Saudi Arabia. Masters thesis, KFUPM.
(1988) Prediction of pavement rutting from laboratory characterization tests. Masters thesis, KFUPM.
(1988) Evaluation of slurry seal performance in the Eastern Province of Saudi Arabia. Masters thesis, KFUPM.
(1982) Improving water resistance of asphalt concrete in Saudi Arabia. Masters thesis, KFUPM.
(1988) Laboratory evaluation of local asphalt concrete mix design procedures. Masters thesis, KFUPM.
(1989) Road traffic noise in developing countries. Masters thesis, KFUPM.
(1984) Static and dynamic triaxial tests on sulphur-asphalt-sand mixes. Masters thesis, KFUPM.
(1985) Strength of asphalt emulsion treated marl for road bases. Masters thesis, KFUPM.
(1985) Structural evaluation of in-service asphalt pavements by deflection measurements. Masters thesis, KFUPM.
(1983) Validity and use of traffic conflict technique : a study in the Kingdom of Saudi Arabia. Masters thesis, KFUPM.
(1997) A Study on the development of vehicular loding for design of highway bridges in Saudi Arabia. Masters thesis, KFUPM.
(2005) Calibration of VISSIM to the traffic conditions of Khobar and Dammam, Saudi Arabia. Masters thesis, KFUPM.
(2003) Causes of female teacher work trip accidents in the Kingdom of Saudi Arabia. Masters thesis, KFUPM.
(1987) Development of guidelines for four phase traffic signal scheme in the Kingdom of Saudi Arabia. Masters thesis, KFUPM.
(1995) Effect of captive riders in intercity mode-choice modeling. Masters thesis, KFUPM.
(1995) Laboratory evaluation of hedmanite and lime modified asphalt concrete mixes. Masters thesis, KFUPM.
(1987) Effect of sight distance on the safety of unsignalized intersections. Masters thesis, KFUPM.
(1988) Parking problem of Arafat. Masters thesis, KFUPM.
(2002) Performance modification of Saudi-asphalt binders using SABIC polymers. Masters thesis, KFUPM.
(1989) Pedestrian behavior related to accident involvement. Masters thesis, KFUPM.
(1981) The effects of baghouse fines and mineral fillers on asphalt mix properties in the Eastern Province of Saudi Arabia. Masters thesis, KFUPM.
(1997) Performance evaluation of slow sand filters: a probabilistic approach. Masters thesis, KFUPM.
(1997) Validation and improvement of rear-end traffic conflict model for safety evaluation of coordinated signal systems. Masters thesis, KFUPM.
(1996) Proposed methodology for designing the signal change interval. Masters thesis, KFUPM.
(1985) Recycling of deteriorated asphalt pavements. Masters thesis, KFUPM.
(1997) Relationship between the noncompliance behavior at signalized intersection an driver characteristics. Masters thesis, KFUPM.
(1997) Developing behavioral models for driver gap acceptance at priority intersections. PhD thesis, KFUPM.
(1997) Modeling of pavement condition and maintenance priority ranking for road networks. PhD thesis, KFUPM.
(1996) Performance modeling of Arabian asphalt using HP-GPC chromatography. PhD thesis, KFUPM.
(1996) Polymer modification of Arab Asphalt to Suit Gulf Countries' performance requirements. PhD thesis, KFUPM.
(1994) The effect of signal coordination on interesection safety. PhD thesis, KFUPM.
(1994) The effects of mode perceptions on intercity mode-choice behavior in Saudi Arabia. PhD thesis, KFUPM.
Loss Of Punching Capacity Of Bridge Deck Slabs From Crack Damage. Loss Of Punching Capacity Of Bridge Deck Slabs From Crack Damage.
Combined experimental-numerical approach to characterization of steel-glue-concrete interface. Combined experimental-numerical approach to characterization of steel-glue-concrete interface.
Nonlinear Finite Element Modelling Of Failure Modes In RC Slabs. Nonlinear Finite Element Modelling Of Failure Modes In RC Slabs.
(1999) Analysis of static and dynamic characteristics of twin-cell steel box girders. Masters thesis, KFUPM.
Stress Analysis For Thick Rectangular Plates. Stress Analysis For Thick Rectangular Plates.
Punching capacity of deck slabs in girder-slab bridges. Punching capacity of deck slabs in girder-slab bridges.
Generalized Theory For Bending Of Thick Plates. Generalized Theory For Bending Of Thick Plates.
(1980) Application of modified Reissner theory to sandwich plates. Masters thesis, KFUPM.
Guidelines toward the design of reinforced concrete beams with external plates. Guidelines Toward The Design Of Reinforced Concrete Beams With External Plates.
Repaired Reinforced Concrete Beams. Repaired Reinforced Concrete Beams.
Sensitivity study of criteria governing collapse of centrally loaded R/C slabs. Sensitivity study of criteria governing collapse of centrally loaded R/C slabs.
(1979) Approximate techniques towards solutions of Reissner plates. Masters thesis, KFUPM.
(1981) Computation of lateral-torsional buckling loads for nonprismatic beam-columns. Masters thesis, KFUPM.
Predicting residual strength in unsaturated concrete exposed to sulfate attack. Predicting residual strength in unsaturated concrete exposed to sulfate attack.
Loss of punching capacity of bridge deck slabs from crack damage. Loss of punching capacity of bridge deck slabs from crack damage.
(2005) Compliance criteria for quality concrete. Masters thesis, KFUPM.
Influence Of Non-Propagating Cracks On Conservative Buckling Of Columns. Influence Of Non-Propagating Cracks On Conservative Buckling Of Columns..
Analysis Of Continuous Curved Girder-Slab Bridges. Analysis Of Continuous Curved Girder-Slab Bridges.
Optimization Of Built-Up Nonuniform Steel I-Beams. Optimization Of Built-Up Nonuniform Steel I-Beams..
CDM model for residual strength of concrete under cyclic compression. CDM model for residual strength of concrete under cyclic compression.
Stress analysis for thick rectangular plates. Stress analysis for thick rectangular plates.
Crack minimization model for hot weather concreting. Crack minimization model for hot weather concreting.
Categorization of damage to concrete bridge decks in Saudi Arabia. Categorization of damage to concrete bridge decks in Saudi Arabia.
Performance Of Epoxy-Repaired Concrete Under Thermal Cycling. Performance Of Epoxy-Repaired Concrete Under Thermal Cycling.
Nonlinear finite element modelling of failure modes in RC slabs. Nonlinear finite element modelling of failure modes in RC slabs.
Fracture energy of weakly reinforced concrete beams. Fracture energy of weakly reinforced concrete beams.
Effect Of Thermal Cycling On The Durability Of Concrete Made From Local Materials In The Arabian Gulf Countries. Effect Of Thermal Cycling On The Durability Of Concrete Made From Local Materials In The Arabian Gulf Countries.
Effect Of Filler Type On The Durability Of Sulfur-Sand Composites In The Arabian Gulf Countries. Effect Of Filler Type On The Durability Of Sulfur-Sand Composites In The Arabian Gulf Countries..
Simulation of shrinkage distress and creep relief in concrete repair. Simulation of shrinkage distress and creep relief in concrete repair.
(1985) Corrosion of reinforcing steel in sulphur concrete. Masters thesis, KFUPM.
Performance of epoxy-repaired concrete under thermal cycling. Performance of epoxy-repaired concrete under thermal cycling.
Analysis of continuous curved girder-slab bridges. Analysis of continuous curved girder-slab bridges.
Mode shapes and crack damage in subtangential buckling of columns. Mode shapes and crack damage in subtangential buckling of columns.
Mode Shapes And Crack Damage In Subtangential Buckling Of Columns. Mode Shapes And Crack Damage In Subtangential Buckling Of Columns.
Corrosion Of Steel Reinforcement In Sulfur Concrete. Corrosion Of Steel Reinforcement In Sulfur Concrete..
Risks of cracking and delamination in patch repair. Risks of cracking and delamination in patch repair.
Inclusion Of Transverse Normal Strain Effects Into The Finite Element Formulation Of Timoshenko Beams. Inclusion Of Transverse Normal Strain Effects Into The Finite Element Formulation Of Timoshenko Beams..
Flexure Of Statically Indeterminate Cracked Beams. Flexure Of Statically Indeterminate Cracked Beams..
Use Of Plasticized Sulphur In Sisal-Fibre Concrete. Use Of Plasticized Sulphur In Sisal-Fibre Concrete..
Damage model for monotonic and fatigue response of high strength concrete. Damage model for monotonic and fatigue response of high strength concrete.
Influence Of Non-Propagating Cracks On Conservative Buckling Of Columns. Influence Of Non-Propagating Cracks On Conservative Buckling Of Columns..
Technical Theory Of Beams With Normal Strain. Technical Theory Of Beams With Normal Strain..
Corrosion Of Steel Reinforcement In Sulfur Concrete. Corrosion Of Steel Reinforcement In Sulfur Concrete..
Flexure Of Statically Indeterminate Cracked Beams. Flexure Of Statically Indeterminate Cracked Beams..
Effects Of Shear And Normal Strain On Plate Bending. Effects Of Shear And Normal Strain On Plate Bending..
Use Of Plasticized Sulphur In Sisal-Fibre Concrete. Use Of Plasticized Sulphur In Sisal-Fibre Concrete..
(1999) Captivity revisited. Captivity revisited.
Influence Functions In The Numerical Analysis Of Bending Of Thin Elastic Plates. Influence Functions In The Numerical Analysis Of Bending Of Thin Elastic Plates..
Technical Theory Of Beams With Normal Strain. Technical Theory Of Beams With Normal Strain..
Fatigue behavior of reinforced concrete beams strengthened with CFRP strips. In: Fatigue behavior of reinforced concrete beams strengthened with CFRP strips.
Effect of geotextiles on the load-carrying capacity and deformation characteristics of sabkha soil. Effect of geotextiles on the load-carrying capacity and deformation characteristics of sabkha soil.
Refined Theory For Isotropic Plates. Refined Theory For Isotropic Plates..
Comparative evaluation of plasticity theories against tension-torsion test at finite strain. In: Comparative evaluation of plasticity theories against tension-torsion test at finite strain.
Minimum Weight Design Of Tapered Steel I-Columns. Minimum Weight Design Of Tapered Steel I-Columns..
Method Of Weighted Residuals As Applied To Nonlinear Differential Equations. Method Of Weighted Residuals As Applied To Nonlinear Differential Equations..
(1983) Influence of transverse normal strain on finite, simply supported isotropic and orthotropic plates. Masters thesis, KFUPM.
(1978) Investigation into the modulus of elasticity of concrete. Masters thesis, KFUPM.
(1982) Optimization of concrete mix design using a statistical approach. Masters thesis, KFUPM.
(2006) Moisture transport and shrinkage in new generation concretes. Masters thesis, KFUPM.
(1987) Nonlinear finite element analysis of ferrocement beams. Masters thesis, KFUPM.
(1984) Material and fracture characterization of sisal fibre concrete. Masters thesis, KFUPM.
(1981) Optimizaiton of concrete mix design for durability in the Estern Province of Saudi Arabia. Masters thesis, KFUPM.
(1983) Minimum weight design of nonuniform steel I-girders and columns. Masters thesis, KFUPM.
(1986) Mixed mode fracture for concrete. Masters thesis, KFUPM.
Analytical Solution Of The Diffusion - Convection Equation Over A Finite Domain. Analytical Solution Of The Diffusion - Convection Equation Over A Finite Domain..
Refined Theory For Flexural Motions Of Isotropic Elastic Plates. Refined Theory For Flexural Motions Of Isotropic Elastic Plates..
Low free-stream turbulence in test sections through packed beds and fibrous mats. Low free-stream turbulence in test sections through packed beds and fibrous mats.
(2006) Effect of geotextile and cement on the performance of sabkha subgrade. Effect of geotextile and cement on the performance of sabkha subgrade.
Estimation of Dense Nonaqueous Phase Liquid (DNAPL) volume from monitoring wells fluid levels. Estimation of Dense Nonaqueous Phase Liquid (DNAPL) volume from monitoring wells fluid levels.
Mix Design, Durability And Creep Characteristics Of Sulphur Infiltrated Concrete. Mix Design, Durability And Creep Characteristics Of Sulphur Infiltrated Concrete..
(1985) Influence of cracks on the elastic stability of columns and frames. Masters thesis, KFUPM.
Long Term Chemical Stability Of Epichlorohydrin/Bisphenol Resin Polymer Concrete. Long Term Chemical Stability Of Epichlorohydrin/Bisphenol Resin Polymer Concrete..
Utilization of local material in the construction of an embankment for recharging groundwater aquifer with treated wastewater effluents. Utilization of local material in the construction of an embankment for recharging groundwater aquifer with treated wastewater effluents.
Estimation of spilled hydrocarbon volume - The state-of-the-art. Estimation of spilled hydrocarbon volume - The state-of-the-art.
Parameter Testing Of Epoxy Polymer Concrete. Parameter Testing Of Epoxy Polymer Concrete..
Nondeterministic evaluation of field scale-dispersivity relation. Nondeterministic evaluation of field scale-dispersivity relation.
Thick-Walled Micropolar Cylinder In A State Of Plane Strain. Thick-Walled Micropolar Cylinder In A State Of Plane Strain..
Removal of dimethyl phthalate from water by UV-H2O2 process. Removal of dimethyl phthalate from water by UV-H2O2 process.
Bending Of Micropolar Plates. Bending Of Micropolar Plates.
(1994) Deterioration of concrete structures in the coastal regions of the Republic of Yemen. Masters thesis, KFUPM.
(1988) Durability and thermal incompatibility of concrete constituents made from local materials in the Arabian Gulf Countries. Masters thesis, KFUPM.
(1984) Durability assessment criterion for concrete and reinforcement exposed to simulated environmental conditions of Saudi Arabia. Masters thesis, KFUPM.
(2005) Durability performance of GFRP bars under aggressive local exposure conditions. Masters thesis, KFUPM.
(1979) Economic proportioning of continuous steel I - beam. Masters thesis, KFUPM.
(2007) Effect of curing methods on properties of plain and blended cement concretes. Masters thesis, KFUPM.
(1987) Effect of fiber reinforcement on the durability of reinforced concrete in Arabian Gulf Region. Masters thesis, KFUPM.
(1979) Effect of the rigidity of columns and the dimensional changes in beams on post-tensioning forces. Masters thesis, KFUPM.
(1990) Evaluation of repair materials with emphasis on crack injection repair. Masters thesis, KFUPM.
(1989) Evaluation of shear behavior of ferrocement using direct shear specimen and beam specimen. Masters thesis, KFUPM.
(2007) Evaluation of ternary cements for improving concrete durability. Masters thesis, KFUPM.
(1985) Fatigue of concrete in the presence of a crack. Masters thesis, KFUPM.
(1976) Finite beams on an elastic foundation. Masters thesis, KFUPM.
(1989) Finite element modelling for the bending of thick plates. Masters thesis, KFUPM.
(1986) Flexural behavior of ferrocement I-beams and box-beams. Masters thesis, KFUPM.
(1988) Flexural behavior of ferrocement sandwich panels. Masters thesis, KFUPM.
(2006) Flexural behavior of prestressed precast hollow core slabs strengthened with CFRP sheets. Masters thesis, KFUPM.
(2007) Validation and improvement of a rear-end conflict prediction model. Transportation Research Records.
(1987) Prediction Of Head-On Accident Sites. Transportation Research Record.
(2006) Adequacy of the tensile/elongation test as a quality control criterion for vehicle tires. Polymer Testing.
(1990) Fracture modelling of reinforced concrete beams in mode I crack. Masters thesis, KFUPM.
(2004) Validation and improvement of a rear-end conflict prediction model. Transportation Research Record.
(2005) Tire condition and drivers' practice in maintaining tires in Saudi Arabia. Accident Analysis and Preventio.
(2006) Rheological investigation of the influence of acrylate polymers on the modification of asphalt. Journal of Applied Polymer Science.
(2006) Influence of polymer type and structure on polymer modified asphalt concrete mix. Canadian Journal of Chemical Engineering.
(2002) Journal of Materials in Civil Engineering. Journal of Materials in Civil Engineering.
(2002) Clegg hammer - California-bearing ratio correlations. Journal of Materials in Civil Engineering.
(2002) Stabilization of dune sand using foamed asphalt. Geotechnical Testing Journal.
(2001) Modeling resilient modulus and temperature correction for Saudi roads. Journal of Materials in Civil Engineering.
(1999) Characterization of polymer modified Gulf asphalts. Petroleum Science and Technology.
(1985) Flexural behavior of reinforced sulphur concrete beams. Masters thesis, KFUPM.
(1999) Optimization of steel slag aggregates for bituminous mixes in Saudi Arabia. Journal of Materials in Civil Engineering.
(1999) Prediction of asphalt rheological properties using HP-GPC. Journal of Materials in Civil Engineering.
(1999) Use of an analytical hierarchy process in pavement maintenance priority ranking. Journal of Quality in Maintenance Engineering.
(1998) Laboratory study of asphalt concrete durability in Jeddah. Building and Environment.
(1998) Polymer modification of Arab asphalt. Journal of Materials in Civil Engineering.
(1998) Performance of a stabilized marl base: A case study. Construction and Building Materials.
(1998) Physicochemical characterization of Gulf asphalts. Petroleum Science and Technology.
(1998) Performance-based characterization of Arab Asphalt. Building and Environment.
(1998) Improving slurry seal performance in Eastern Saudi Arabia using steel slag. Construction and Building Materials.
(1998) Evaluation of Arabian asphalt binder for low-temperature cracking. Journal of Materials in Civil Engineering.
(1997) Performance modeling of Arabian asphalt using HP-GPC. Journal of Materials Engineering and Performance.
(1997) Temperature variation of flexible and rigid pavements in Eastern Saudi Arabia. Building and Environment.
(1997) Improvement of marl and dune sand for highway construction in arid areas. Building and Environment.
(1997) Development of performance-based bitumen specifications for the Gulf countries. Construction and Building Materials.
(1991) Laboratory evaluation of reclaimed rubber asphaltic concrete mixes. Journal of Materials in Civil Engineering.
Influence of Mw of LDPE and vinyl acetate content of EVA on the rheology of polymer modified asphalt. In: Rheologica Acta, 2005.
Boussinesq Problem Of Plane Micropolar Elasticity. Boussinesq Problem Of Plane Micropolar Elasticity..
Finite Element Approach To Bending Of Micropolar Plates. Finite Element Approach To Bending Of Micropolar Plates..
On The Use Of Various Shell Theories In The Analysis Of Axisymmetrically Loaded Circular Containers. On The Use Of Various Shell Theories In The Analysis Of Axisymmetrically Loaded Circular Containers..
(2006) Self-reported attributes of traffic accident involvement by female teachers working in Saudi Arabia. In: WIT transactions on Built Environment.
(2007) Development of intercity work mode choice model for Saudi Arabia. In: WIT Transaction on Built Environment.
Analysis of radially tapered circular plate sectors by finite difference. In: Analysis of radially tapered circular plate sectors by finite difference.
Drying shrinkage stresses in concrete patch repair systems. Drying shrinkage stresses in concrete patch repair systems.
FATIGUE CRACK PROPAGATION IN PLAIN CONCRETE. In: FATIGUE CRACK PROPAGATION IN PLAIN CONCRETE..
Towards a canonical elastoplastic damage model. Towards a canonical elastoplastic damage model.
FRACTURE CHARACTERIZATION OF REINFORCED CONCRETE BEAMS. In: FRACTURE CHARACTERIZATION OF REINFORCED CONCRETE BEAMS..
Comparative evaluation of plasticity theories against tension-torsion test at finite strain. Comparative evaluation of plasticity theories against tension-torsion test at finite strain.
Principal direction paths in tension-torsion test at finite strain. Principal direction paths in tension-torsion test at finite strain.
Computational chemo-damage modelling for assessment of concrete patch repair durability. In: Computational chemo-damage modelling for assessment of concrete patch repair durability.
Effect Of Filler Type On The Durability Of Sulfur-Sand Composites In The Arabian Gulf Countries. Effect Of Filler Type On The Durability Of Sulfur-Sand Composites In The Arabian Gulf Countries..
Refined Theory For Isotropic Plates. Refined Theory For Isotropic Plates..
Minimum Weight Design Of Tapered Steel I-Columns. Minimum Weight Design Of Tapered Steel I-Columns..
Optimization Of Laterally Unsupported Unstiffened Steel I-Beams. Optimization Of Laterally Unsupported Unstiffened Steel I-Beams..
Modeling of shrinkage and creep stresses in concrete repair. Modeling of shrinkage and creep stresses in concrete repair.
Continuous Steel I-Girders: Optimum Proportioning. Continuous Steel I-Girders: Optimum Proportioning.
Economic Design Of Homogeneous I-Beams. Economic Design Of Homogeneous I-Beams.
(2007) Evaluation of Foamed Asphalt for Road base Stabilization. In: Proceeding of 7th Saudi Engineering Conference,, Dec, 2007., Riyadh, Saudi Arabia..
CDM based finite element code for concrete in 3-D. CDM based finite element code for concrete in 3-D.
Combined experimental-numerical approach to characterization of steel-glue-concrete interface. Combined experimental-numerical approach to characterization of steel-glue-concrete interface.
Sensitivity Study Of Criteria Governing Collapse Of Centrally Loaded R/C Slabs. Sensitivity Study Of Criteria Governing Collapse Of Centrally Loaded R/C Slabs.
Chloride diffusion coefficient of concrete in the Arabian Gulf environment. Chloride diffusion coefficient of concrete in the Arabian Gulf environment.
Determination of the effective chloride diffusion coefficient in concrete via a gas diffusion technique. Determination of the effective chloride diffusion coefficient in concrete via a gas diffusion technique.
Towards A Canonical Elastoplastic Damage Model. Towards A Canonical Elastoplastic Damage Model.
Modelling of damaged RC beams strengthened by fibre composite plates. Modelling of damaged RC beams strengthened by fibre composite plates.
Durability Performance Of Repaired Reinforced Concrete Beams. Durability Performance Of Repaired Reinforced Concrete Beams.
Shear strength of plated RC beams. Shear strength of plated RC beams.
Strengthening Of Initially Loaded Reinforced Concrete Beams Using FRP Plates. Strengthening Of Initially Loaded Reinforced Concrete Beams Using FRP Plates.
Peeling and diagonal tension failures in steel plated R/C beams. Peeling and diagonal tension failures in steel plated R/C beams.
Optimum post-tensioning for three-span continuous slab-type bridge decks. Optimum post-tensioning for three-span continuous slab-type bridge decks.
Assessment and repair of distressed kiln piers in a cement manufacturing plant. Assessment and repair of distressed kiln piers in a cement manufacturing plant.
Punching Capacity Of Deck Slabs In Girder-Slab Bridges. Punching Capacity Of Deck Slabs In Girder-Slab Bridges.
Effect of holidays and surface damage to FBEC on reinforcement corrosion. Effect of holidays and surface damage to FBEC on reinforcement corrosion.
Guidelines Toward The Design Of Reinforced Concrete Beams With External Plates. Guidelines Toward The Design Of Reinforced Concrete Beams With External Plates.
Computational Model For Reinforced Concrete Beams Strengthened By Epoxy Bonded Steel Plates. Computational Model For Reinforced Concrete Beams Strengthened By Epoxy Bonded Steel Plates.
(2002) Laboratory Comparison Study for the Use of Stone Matrix Asphalt in Hot Weather Climates. In: Proceedings of the First Engineering Conference,, 2002, Aden, Yemen.
Flexural Behaviour Of Precracked Reinforced Concrete Beams Strengthened Externally By Steel Plates. Flexural Behaviour Of Precracked Reinforced Concrete Beams Strengthened Externally By Steel Plates.
(2005) Effect of Anti-Stripping Agents on Asphalt-Aggregate Interactions. In: 40th IUPAC Congress, Innovations in chemistry,, 2005, Beijing, China.
(2004) Chemistry Of Bonding Between Asphalt And Aggregates. In: CHEMINDEX04, Proceedings of the Confrence ChemIndex,, 2004, Manama, Bharain.
A survey of commercial vehicle weights in Saudi Arabia. A survey of commercial vehicle weights in Saudi Arabia.
(2002) Performance Modification of Saudi-Asphalt Binders Using SABIC Polymers. In: Proceedings of the Sixth Saudi Engineering Conference,, 2002, KFUPM, Dhahran..
Optimum design of parabolic steel box arches. Optimum design of parabolic steel box arches.
Photocatalytic degradation of nitrotoluene in aqueous TiO2 suspension. Photocatalytic degradation of nitrotoluene in aqueous TiO2 suspension.
(2002) Effect of Compaction Methods on the In-situ Properties of Asphalt Concrete. In: Proceedings of the Sixth Saudi Engineering Conference,, Nov, 2002, KFUPM, Dhahran, Saudi Arabia..
(1987) An experimental model study to investigate the effect of scale on dispersion characteristics in chlorine contact. Masters thesis, KFUPM.
(1983) Bio-chemical treatment of saline domestic wastewater using RBCs. Masters thesis, KFUPM.
(1988) Effect of denitrification on dispersion of nitrate in saturated porous media. Masters thesis, KFUPM.
(1980) Environmental considerations in planning of urban areas - a case study of Dammam-Khobar-Dhahran area. Masters thesis, KFUPM.
(1990) Estimating flood quantiles in southwestern part of Saudi Arabia. Masters thesis, KFUPM.
(1985) Evaluating policy changes using a network simulation model. Masters thesis, KFUPM.
(1996) Evaluation of a patented combined water desalination and power generating plant. Masters thesis, KFUPM.
(1987) Evaluation of water quality in KFUPM drinking water system. Masters thesis, KFUPM.
(1978) Feasibility of biological nitrification process for treatment of fertilizer industry water. Masters thesis, KFUPM.
(1979) Increased runoff through reduced infiltration in Saudi Arabia. Masters thesis, KFUPM.
(1983) Influence of Ozone bubbling activity and reaction Kinetics in Ozone-Wastewater disinfection system. Masters thesis, KFUPM.
(2001) Locating optimum water quality monitoring stations in water distribution networks, using genetic algorithm. Masters thesis, KFUPM.
(2004) Optimal locations of booster disinfection stations in Al-Khobar water distribution system. Masters thesis, KFUPM.
(1987) Quality of desalinated blended seawater in Dammam. Masters thesis, KFUPM.
(1986) Tertiary wastewater treatment by direct filtration. Masters thesis, KFUPM.
(2006) Treatment of petroleum refinery wastewater using TiO2-Mediated photocatalysis. Masters thesis, KFUPM.
(2006) Treatment of simulated dairy wastewater by electrocoagulation. Masters thesis, KFUPM.
(2006) Treatment of simulated petrochemical wastewater by means of continuous electrocoagulation-ultrafiltration process. Masters thesis, KFUPM.
(2005) Treatment of the oil refinery wastewater using photocatalysis. Masters thesis, KFUPM.
(1987) Trihalomethanes (THMs) formation in a distillation process. Masters thesis, KFUPM.
(1989) Collocation on irregular domains with adaptive hermite element family for transport problems. PhD thesis, KFUPM.
(1992) Biological treatment of hazardous contaminants in sequencing batch reacors. Masters thesis, KFUPM.
(1991) Non-linear finite element modelling of reinforced concrete slabs. PhD thesis, KFUPM.
(1989) Characterization and treatment of a petrochemical wastewater for reuse. Masters thesis, KFUPM.
(2004) Combined electrooxidation and electrocoagulation processes for the treatment of municipal wastewater. Masters thesis, KFUPM.
(2002) Development of an equivalent dispersion coefficient for a complex contaminant transport model. Masters thesis, KFUPM.
(1988) Dispersion of chloroform in a saturated porous media. Masters thesis, KFUPM.
(1992) Effect of dissolved oxygen on the adsorptive capacity of a granular activated charcoal for phenol and O-Cresol. Masters thesis, KFUPM.
(1993) Evaluation of Dammam carrousel treatment plant for nitrogen removal. Masters thesis, KFUPM.
(1993) Experimental investigation of microbial growth in subsurface environment. Masters thesis, KFUPM.
(1993) Non-linear finite element analysis of reinforced concrete beams repaired by plate bonding. PhD thesis, KFUPM.
(1996) Effects of oily sludge landforming on the soils environment. Masters thesis, KFUPM.
(1989) Investigation of leachate from a sanitary landfill in Saudi Arabia. Masters thesis, KFUPM.
(1997) Fate of secondary effluent flow through porous media. Masters thesis, KFUPM.
(1995) Impact of process variables on nutrient removal in slow sand filters. Masters thesis, KFUPM.
(1997) Microbial evaluation of Al-Khobar wastewater treatment plants. Masters thesis, KFUPM.
Long-term monitoring of FBEC steel bars corrosion in chloride-contaminated concrete. In: Long-term monitoring of FBEC steel bars corrosion in chloride-contaminated concrete.
Volume change behavior of arid calcareous soils. In: Volume change behavior of arid calcareous soils.
(1998) Elastic plastic analysis of semi-rigid industrial frames. PhD thesis, KFUPM.
(2000) Iterative coupling of boundary and finite element methods. PhD thesis, KFUPM.
(1991) Mechanisms of high durability performance of plain and blended cements. PhD thesis, KFUPM.
Interferences in Prompt خ ³ Analysis of corrosive contaminants in concrete. Interferences in Prompt خ ³ Analysis of corrosive contaminants in concrete.
Plastic shrinkage cracking of blended cement concretes in hot environments. In: Plastic shrinkage cracking of blended cement concretes in hot environments.
Influence of chloride ions on sulphate deterioration in plain and blended cements. In: Influence of chloride ions on sulphate deterioration in plain and blended cements.
Prompt gamma analysis of chlorine in concrete for corrosion study. Prompt gamma analysis of chlorine in concrete for corrosion study.
Measurement of lime/silica ratio in concrete using PGNAA technique. Measurement of lime/silica ratio in concrete using PGNAA technique.
Effect of type and dosage of silica fume on plastic shrinkage in concrete exposed to hot weather. Effect of type and dosage of silica fume on plastic shrinkage in concrete exposed to hot weather.
Effect of silica fume on the mechanical properties of low quality coarse aggregate concrete. Effect of silica fume on the mechanical properties of low quality coarse aggregate concrete.
Effectiveness of surface coatings in improving concrete durability. Effectiveness of surface coatings in improving concrete durability.
Effectiveness of corrosion inhibitors in contaminated concrete. Effectiveness of corrosion inhibitors in contaminated concrete.
Characterization and chemical stabilization of Al-Qurayyah sabkha soil. Characterization and chemical stabilization of Al-Qurayyah sabkha soil.
Clegg hammer - California-bearing ratio correlations. Clegg hammer - California-bearing ratio correlations.
Durability of plain and blended cements in marine environments. Durability of plain and blended cements in marine environments.
Stabilization of dune sand using foamed asphalt. Stabilization of dune sand using foamed asphalt.
Attack on plain and blended cements exposed to aggressive sulfate environments. Attack on plain and blended cements exposed to aggressive sulfate environments.
(1991) Criteria for cathodic protection of steel in concrete in the context of Arabian Gulf environment. PhD thesis, KFUPM.
Effect of soil pollution on substructures. Effect of soil pollution on substructures.
Characteristics of silica fume and its impacts on concrete in the Arabian Gulf. Characteristics of silica fume and its impacts on concrete in the Arabian Gulf.
Effects of Calcium Sulfate on Swelling Potential of an Expansive Clay. Effects of Calcium Sulfate on Swelling Potential of an Expansive Clay.
Expansive characteristics of gypsiferous/anhydritic soil formations. Expansive characteristics of gypsiferous/anhydritic soil formations.
(1995) Canonical elastoplastic - damage modelling of reinforced concrete. PhD thesis, KFUPM.
Corrosion resistance and bond strength of epoxy-coated steel bars. Corrosion resistance and bond strength of epoxy-coated steel bars.
Performance of a stabilized marl base: A case study. Performance of a stabilized marl base: A case study.
Plastic shrinkage cracking of concrete in hot-arid environments. Plastic shrinkage cracking of concrete in hot-arid environments.
Effect of holidays and surface damage to FBEC on reinforcement corrosion. Effect of holidays and surface damage to FBEC on reinforcement corrosion.
Effect of Thermal Variations on Bond Strength of Fusion-Bonded Epoxy-Coated Bars. Effect of Thermal Variations on Bond Strength of Fusion-Bonded Epoxy-Coated Bars.
Concrete mixture design for hot weather: Experimental and statistical analyses. Concrete mixture design for hot weather: Experimental and statistical analyses.
(1989) A generalized theory for bending of thick isotropic rectangular plates. PhD thesis, KFUPM.
(2000) Analysis of laminated general shells undergoing finite rotations and large motion. PhD thesis, KFUPM.
Sulfate Attack and Reinforcement Corrosion in Plain and Blended Cements Exposed to Sulfate Environments. Sulfate Attack and Reinforcement Corrosion in Plain and Blended Cements Exposed to Sulfate Environments.
Performance and Correlation of the Properties of Fly Ash Cement Concrete. Performance and Correlation of the Properties of Fly Ash Cement Concrete.
Geotechnical behaviour of saline sabkha soils. Geotechnical behaviour of saline sabkha soils.
Compressibility and collapse characteristics of arid saline sabkha soils. Compressibility and collapse characteristics of arid saline sabkha soils.
Stabilization of an arid, saline sabkha soil using additives. Stabilization of an arid, saline sabkha soil using additives.
Performance of 15 reinforced concrete mixtures in magnesium-sodium sulphate environments. Performance of 15 reinforced concrete mixtures in magnesium-sodium sulphate environments.
Strength characteristics of sabkha soils. Strength characteristics of sabkha soils.
(1999) Simulation and assessment of concrete repair systems. PhD thesis, KFUPM.
Durability of reinforced concrete in aggressive sabkha environments. Durability of reinforced concrete in aggressive sabkha environments.
Electrochemical behaviour of steel in plain and blended cement concretes in sulphate and/or chloride environments. Electrochemical behaviour of steel in plain and blended cement concretes in sulphate and/or chloride environments.
Role of chloride ions on expansion and strength reduction in plain and blended cements in sulfate environments. Role of chloride ions on expansion and strength reduction in plain and blended cements in sulfate environments.
(2000) Elasto-damage fatigue modeling of RC beams strengthened by CFRP. PhD thesis, KFUPM.
Effect of magnesium sulfate and sodium sulfate on the durability performance of plain and blended cements. Effect of magnesium sulfate and sodium sulfate on the durability performance of plain and blended cements.
Influence of geotextiles on performance of saline sebkha soils. Influence of geotextiles on performance of saline sebkha soils.
(2000) Durability of high performance concrete. PhD thesis, KFUPM.
Chemical stabilization of sabkha soils at high moisture contents. Chemical stabilization of sabkha soils at high moisture contents.
(2004) Computational chemo-damage transport modeling of durability synergies in concrete. PhD thesis, KFUPM.
Modified oedometer for arid, saline soils. Modified oedometer for arid, saline soils.
Suggested modifications to ASTM standard methods when testing arid, saline soils. Suggested modifications to ASTM standard methods when testing arid, saline soils.
(1978) Analysis of multi girder short span highway bridges. Masters thesis, KFUPM.
Influence of sulfate ions on chloride-induced reinforcement corrosion in portland and blended cement concretes. Influence of sulfate ions on chloride-induced reinforcement corrosion in portland and blended cement concretes.
(1981) An Investigation of properties of concrete made with concrete rubble as aggregate. Masters thesis, KFUPM.
Magnesium-sodium sulfate attack in plain and blended cements. Magnesium-sodium sulfate attack in plain and blended cements.
Effect of chloride and sulfate ions on reinforcement corrosion. Effect of chloride and sulfate ions on reinforcement corrosion.
Response of sabkha to laboratory tests: a case study. Response of sabkha to laboratory tests: a case study.
Carbonation and chloride-induced corrosion of reinforcement in fly ash concretes. Carbonation and chloride-induced corrosion of reinforcement in fly ash concretes.
(1993) Modeling of biological wastewater treatment in sequencing batch reactors. Masters thesis, KFUPM.
Effect of superplasticizer on plastic shrinkage of plain and silica fume cement concretes. Effect of superplasticizer on plastic shrinkage of plain and silica fume cement concretes.
Effect of geotextile and cement on the performance of sabkha subgrade. Effect of geotextile and cement on the performance of sabkha subgrade.
Elemental analysis of concrete samples using an accelerator-based PGNAA setu. Elemental analysis of concrete samples using an accelerator-based PGNAA setu.
(1985) A Variational finite element solution for the Navier-Stokes equations in two dimensions. Masters thesis, KFUPM.
Long-term performance of fusion-bonded epoxy-coated steel bars in chloride-contaminated concrete. Long-term performance of fusion-bonded epoxy-coated steel bars in chloride-contaminated concrete.
(1998) Mechanistic Evaluation of Hedmanite and Lime Modified Asphalt Concrete Mixtures. Journal of Materials in Civil Engineering,, 10 (3). pp. 153-160.
Investigation of Sulfur modified asphalt mixes for road construction in the Gulf region. In: 4th International Gulf Conference on Roads., Doha, Qatar.. (Submitted)
(2008) Evaluation of Foam Asphalt Technology for roads construction in the Gulf. In: 4th International Gulf Conference on Roads, Nov, 2008, Doha, Qatar. (Submitted)
(2007) Evaluation of Sulfur-Asphalt Technology for Local Applications. In: 7th Saudi Engineering Conference,, Dec, 2007., Riyadh.
(2006) Comparative Study of EE2 and Polybilt Modified Asphalt Concrete. In: Third International Gulf Conference on Roads,, Oct, 2006., Muscat, Oman.
(2003) Risk and hydraulic reliability analysis of water distribution systems. Masters thesis, KFUPM.
(1989) A refined theory for symmetric orthotropic laminated plates. Masters thesis, KFUPM.
(1989) Status of hydrological network in south-western region of the Kingdom of Saudi Arabia. Masters thesis, KFUPM.
(1989) Tertiary treatment of municipal sewage via slow sand filtration. Masters thesis, KFUPM.
(1987) Tertiary wastewater treatment by sedimantation and sand filtration. Masters thesis, KFUPM.
(2003) The Production of activated carbon from local palm-date pits for pollution removal process. Masters thesis, KFUPM.
(1985) A Photoelstic investigation of stress distribution in laterally loaded thin plates simulating window glass panels. Masters thesis, KFUPM.
(2004) Treatment of refinery wastewater using crossflow membrane bioreactor. Masters thesis, KFUPM.
(1989) Use of microtubes in the design of optimized trickle irrigation network. Masters thesis, KFUPM.
(1980) A Photoelastic investigation of the stress distribution in the anchorage zones of post-tensioned concrete slabs. Masters thesis, KFUPM.
(1979) A Photoelastic investigation of stress distribution in deep beams with an without web opening. Masters thesis, KFUPM.
(1991) Treatise on solute transport in porous media and its modeling for centration-dependent permeability. PhD thesis, KFUPM.
(2002) Treatment of water contaminated with dimethyl phthalate by Fenton, Photo-Fenton and UV/H₂O₂ processes. PhD thesis, KFUPM.
(1996) Unsteady hydrodynamic forces on spheroidal bodies. PhD thesis, KFUPM.
(1995) A groundwater velocity and dissolved oxygen on bioremediation of gasoline-contaminated sandy aquifers. PhD thesis, KFUPM.
(2005) Assessment of the relationship between the spilled LNAPL volume and its thickness in monitoring wells. PhD thesis, KFUPM.
(1993) Effect of dissolved oxygen on activated carbon uptake. PhD thesis, KFUPM.
(2003) Study of reaction kinetics of a submerged membrane activated sludge process. PhD thesis, KFUPM.
Elemental analysis of concrete samples using an accelerator-based PGNAA setup. Elemental analysis of concrete samples using an accelerator-based PGNAA setup.
Long-term performance of fusion-bonded epoxy-coated steel bars in chloride-contaminated concrete. Long-term performance of fusion-bonded epoxy-coated steel bars in chloride-contaminated concrete.
Effect of superplasticizer on plastic shrinkage of plain and silica fume cement concretes. Effect of superplasticizer on plastic shrinkage of plain and silica fume cement concretes.
Effect of geotextile and cement on the performance of sabkha subgrade. Effect of geotextile and cement on the performance of sabkha subgrade.
(1998) Multiobjective water resources planning under demand, supply and quality uncertainties. Masters thesis, KFUPM.
(1994) Numerical simulation of groundwater depletion in Al-Hasa area. Masters thesis, KFUPM.
(1992) Numerical simulation of groundwater in the Umm Er Radhuma Aquifer at Shadco project. Masters thesis, KFUPM.
(1990) Performance of slow sand filters in treating secondary effluent using different sizes of local sand. Masters thesis, KFUPM.
(1997) Predicting short-duration, high-intensity rainfall in Saudi Arabia. Masters thesis, KFUPM.
(1998) Quality changes of secondary effluent as it passes through amended sand column. Masters thesis, KFUPM.
(1997) Quantifying crude oil spill volume in homogeneous and layered porous media from product thickness in monitoring wells. Masters thesis, KFUPM.
Interferences in Prompt خ³ Analysis of corrosive contaminants in concrete. Interferences in Prompt خ³ Analysis of corrosive contaminants in concrete.
(1997) Removal of microorganisms through slow sand filtration of chlorinated vs. nonchlorinated secondary effluents. Masters thesis, KFUPM.
(1991) Reliability studies of multireservoir system using stochastic approach. Masters thesis, KFUPM.
(1995) Removal of coliphage and bacteria through slow sand filtration. Masters thesis, KFUPM.
(1987) Removal of iron and manganese with ozone. Masters thesis, KFUPM.
(1992) Nonlinear Behavior of Cylinder-Plate Junction of Tensionless Elastic Subgrade. Masters thesis, KING FAHD UNIVERSITY OF PETROLEUM & MINERALS.
(1992) Optimal Design of Reinforced Concrete Frames. Masters thesis, KING FAHD UNIVERSITY OF PETROLEUM & MINERALS.
(1991) Reliability Studies of Multi-Reservoir System Using Stochastic Approach. Masters thesis, KING FAHD UNIVERSITY OF PETROLEUM & MINERALS.
(1991) Characterization of Expansive Soils in the Eastern Province of Saudi Arabia. Masters thesis, KING FAHD UNIVERSITY OF PETROLEUM & MINERALS.
(1992) Biological Treatment of Hazardous Contaminants in Sequencing Batch Reactors. Masters thesis, KING FAHD UNIVERSITY OF PETROLEUM & MINERALS.
(1992) Numerical Simulation of Groundwater in the Umm er Radhuma Aquifer at Shadco Project – Eastern Province. Masters thesis, KING FAHD UNIVERSITY OF PETROLEUM & MINERALS.
(1992) Effect of Dissolved Oxygen on the Adsorptive Capacity of a Granular Activated Charcoal For Phenol and O-Cresol. Masters thesis, KING FAHD UNIVERSITY OF PETROLEUM & MINERALS.
(1993) Modeling of Biological Wastewater Treatment in Sequencing Batch Reactors. Masters thesis, KING FAHD UNIVERSITY OF PETROLEUM & MINERALS.
(1990) Performance of Slow Sand Filters In Treating Secondary Effluent Using Different Sizes of Local Sand. Masters thesis, KING FAHD UNIVERSITY OF PETROLEUM & MINERALS.
(1992) Flexture and Shear Behaviour of Damaged RC Beams Repaired By Plate Bonding. Masters thesis, KING FAHD UNIVERSITY OF PETROLEUM & MINERALS.
CHARACTERISTICS OF THE ARABIAN GULF ENVIRONMENT AND ITS IMPACT ON CONCRETE DURABILITY – AN OVERVIEW. The 6th Saudi Engineering Conference, KFUPM, Dhahran, December 2002.
CERTIFICATION OF PRACTICING CIVIL ENGINEERS IN SAUDI ARABIA: AN OPINION SURVEY. The 6th Saudi Engineering Conference, KFUPM, Dhahran, December 2002.
SULFATE ATTACK ON PLAIN AND BLENDED CEMENTS IN SEA WATER. The 6th Saudi Engineering Conference, KFUPM, Dhahran, December 2002.
Web-based learning. INTED.
(2007) "A new mixed-mode OTA-C filter/oscillator circuit". Electronics World, 113 (1857). pp. 42-45. (In Press)
Crack Minimization Model for Hot Weather Concreting. ARABIAN JOURNAL FOR SCIENCE AND ENGINEERING, 31 (1C): 77-91 JUN 2006.