Aerospace Engineering

Design & Fabrication of Two Seated Aircraft with Advanced Rotating Leading Edge Wing. Masters thesis, King Fahd University of Petroleum and Minerals.

Experimental and Numerical Study of the Enhancement Parameters on Double Slope Still Productivity. Masters thesis, King Fahd University of Petroleum and Minerals.

Experimental Enhancement Study of a Single Slope Solar Still. Masters thesis, King Fahd University of Petroleum and Minerals.

Architectural Engineering and Construction Management

Assessment of Site Selection Criteria for Office Buildings in Saudi Arabia. Masters thesis, King Fahd University of Petroleum and Minerals.

Assessment of Thermal and Energy Performance of Building Envelope Using High Definition Thermal Imaging Technique. Masters thesis, King Fahd University of Petroleum and Minerals.

A Framework for the Identification and Communication of Client and User Requirements to Design Teams. Masters thesis, King Fahd University of Petroleum and Minerals.

(2010) The Impact of HVAC System Operation and Selection on Energy Efficiency in Office Buildings in Hot Climates. Masters thesis, King Fahd University of Petroleum and Minerals.

(2010) Design of a Model University Classroom for Collaborative and Interactive LearningDesign of a Model University Classroom for Collaborative and Interactive Learning. Masters thesis, King Fahd University of Petroleum and Minerals.

Chemical Engineering

Polymerization of Ethylene using Metallocene and Zeigler Natta catalyst with doped-Nanotitania. Masters thesis, King Fahd University of Petroleum and Minerals.

Transport Properties of Gases in Polyethylene/Nanoclay Composites. Masters thesis, King Fahd University of Petroleum and Minerals.

Ethylbenzene Dehydrogenation to Styrene over Mesoporous Catalysts: Synthesis and Kinetic Modeling. Masters thesis, King Fahd University of Petroleum and Minerals.

Production of Carbon Nanotubes (CNTs) using Floating Catalyst Chemical Vapor Deposition (FC-CVD) Reactor for Microbiological Applications. Masters thesis, King Fahd University of Petroleum and Minerals.

Laboratory Evaluation of Viscoelastic Surfacant Acid Diversion in Porous Media. Masters thesis, King Fahd University of Petroleum and Minerals.

Design, Synthesis and Testing of Nanofilteration Membranes for Water Desalination Using LBL Methods. PhD thesis, King Fahd University of Petroleum and Minerals.

Hydrodesulphurization of Model Compounds Using Modified CoMo and NiMo Catalyst. Masters thesis, King Fahd University of Petroleum and Minerals.

Experimental Investigation of Heat Transfer Characterization for CNT- Nanofluid in Heat Exchangers. Masters thesis, King Fahd University of Petroleum and Minerals.

(2011) Propylene by Oxidative Dehydrogenation of Propane over Mixed Metal Oxide Catalyst. Masters thesis, King Fahd University of Petroleum and Minerals.

(2010) Characterization of Polyethylene/Fly Ash Composite and Surface Modification of Fly Ash on Composite Properties. Masters thesis, King Fahd University of Petroleum and Minerals.

(2010) Effect of Surfaces Modification of Carbon Nanotubes (CNT) on the Mechanical and Thermal Properties of CNT/Polypropylene Nanocompsites. Masters thesis, King Fahd University of Petroleum and Minerals.

Chemistry

Synthesis and Characterization of Carbon Nanotube-Based Composites and their Applications for Water Treatment. PhD thesis, King Fahd University of Petroleum and Minerals.

A Study of Amidoamines as Inhibitors for Mild Steel Corrosion in Saline Media Saturated with Carbon dioxide. Masters thesis, King Fahd University of Petroleum and Minerals.

Civil and Environmental Engineering

Study on Segregation and Rheology of Self-Compacting Concrete. Masters thesis, King Fahd University of Petroleum and Minerals.

Simulation of Chloride Transport in Concrete with Stress Induced Damage. PhD thesis, King Fahd University of Petroleum and Minerals.

Electrochemical and Gravimetric Studies towards Service-Life Prediction and Durability-based Design of RC Structures in Corrosive Environments. Masters thesis, King Fahd University of Petroleum and Minerals.

Electro-Coagulation Treatment of Process Wastewater Produced from Water-Based Paint Industry. Masters thesis, King Fahd University of Petroleum and Minerals.

A Model Based Study of a Curved and Skewed Slab Type Bridge Deck used in Makkah. Masters thesis, King Fahd University of Petroleum and Minerals.

Characterization of an Ultra-High Performance Concrete. Masters thesis, King Fahd University of Petroleum and Minerals.

(2011) A Study of the Behavior of Horizontal Knee Connections. Masters thesis, King Fahd University of Petroleum and Minerals.

(2011) Design of Waffle Slabs Using Struc-and-tie Model. Masters thesis, King Fahd University of Petroleum and Minerals.

Computer Engineering

Design of On-Line Decimal Multiplier. Masters thesis, King Fahd University of Petroleum and Minerals.

Writer Identification of Arabic Handwritten Documents. PhD thesis, King Fahd University of Petroleum and Minerals.

Performance Analysis of Real-Time Publish/Subscribe Middleware (RTPS) fpr Sensor Networks. Masters thesis, King Fahd University of Petroleum and Minerals.

Multithread Processor Core Optimized for Parallel Thread Execution. Masters thesis, King Fahd University of Petroleum and Minerals.

Movement-Assisted and Application- Aware Connectivity Restoration in Wireless Sensor-Actor Networks. Masters thesis, King Fahd University of Petroleum and Minerals.

Bypassing Internet Denial by International ISPs using NAT Networks. Masters thesis, King Fahd University of Petroleum and Minerals.

(2011) Anomaly Detection for Honeynet Data Analysis. Masters thesis, King Fahd University of Petroleum and Minerals.

(2011) Design and Evaluation of a Reliable P2P Communication Protocol for IEEE 802.11b Networks. Masters thesis, King Fahd University of Petroleum and Minerals.

(2010) Dynamic Round-Robin Peer-to-Peer (P2P) Domain Name System (DNS). Masters thesis, King Fahd University of Petroleum and Minerals.

(2010) An Efficient Coverage Scheme to Maximize Lifetime in Wireless Sensor Networks. Masters thesis, King Fahd University of Petroleum and Minerals.

(2010) Adapting Tabu Search to Accommodate Online Demand Variations in a Data Network. Masters thesis, King Fahd University of Petroleum and Minerals.

(2013) Deploying Triple-Play Services over Existing IP Networks. Masters thesis, King Fahd University of Petroleum and Minerals.

Electrical Engineering

Fusion of EEG and ECG Signals Using the Dempster Shafer Theory of Evidence. Masters thesis, King Fahd University of Petroleum and Minerals.

A Compressed Sensing Approach to Channel Estimation in Impulse- Radio Ultra-Wideband (IR-UWB) Communication. Masters thesis, King Fahd University of Petroleum and Minerals.

Distributed Estimation over Adaptive Networks. PhD thesis, King Fahd University of Petroleum and Minerals.

The Impact of Power Quality on Industrial Product;Electric Arc Furnace (ACF) Case Study. Masters thesis, King Fahd University of Petroleum and Minerals.

Time of Arrival Estimation and Channel Identification in UWB Systems. Masters thesis, King Fahd University of Petroleum and Minerals.

Dynamic Analysis and Control of Microgrids. PhD thesis, King Fahd University of Petroleum and Minerals.

Optimal Feature Selection Using Mutual Information for Speech Recognition at Low SNR. Masters thesis, King Fahd University of Petroleum and Minerals.

Nonlinear Propagation of Surface- Plasmon-Polaritons in Chalcogenide Glass. Masters thesis, King Fahd University of Petroleum and Minerals.

Design and Fabrication of a MIMO Antenna System for 4G Wireless Handsets. Masters thesis, King Fahd University of Petroleum and Minerals.

Wall Compensation for High Resolution Ultra-wideband. Masters thesis, King Fahd University of Petroleum and Minerals.

Tracking Analysis of e-NLMS and Leaky e-NLMS Algorithms for Colored Gaussian Inputs. Masters thesis, King Fahd University of Petroleum and Minerals.

Dispersive Time-Domain Beam Propagation Method for Analyzing Optical Devices. PhD thesis, King Fahd University of Petroleum and Minerals.

(2011) The Leaky Least Mean Mixed Norm Algorithm. Masters thesis, King Fahd University of Petroleum and Minerals.

(2011) A Model for Cost of Residential Power Outages: A Saudi Arabian Study Case. Masters thesis, King Fahd University of Petroleum and Minerals.

(2010) WIRELESS SENSOR NETWORK PROTOTYPING. Masters thesis, King Fahd University of Petroleum and Minerals.

(2010) Parallel Interference Cancellation in CDMA Based on Fuzzy Logic Using Matrix Algebraic Approach. Masters thesis, King Fahd University of Petroleum and Minerals.

(2011) Photo Voltaic Systems Modeling and Analysis. Masters thesis, King Fahd University of Petroleum and Minerals.

(2010) Design Consideration for Wireless Sensor Network for Industrial Automation. Masters thesis, King Fahd University of Petroleum and Minerals.

Geosciences

Resolving the Cycle Skip Introduced by the Multi-Layer Static Model using a Hybrid Approach. Masters thesis, King Fahd University of Petroleum and Minerals.

Sequence Stratigraphy of Arab C Carbonates in Khursaniyah Field, Eastern Saudi Arabia. Masters thesis, King Fahd University of Petroleum and Minerals.

Enuironmental Assissmentof ground water in Tarout Island, Saudi Arabia. Masters thesis, King Fahd University of Petroleum and Minerals.

Quantitative Assessment of Disinfection By-Products Formed by Chlorine, Chlorine Dioxide and Ozone in Saudi Arabian Drinking Water. Masters thesis, King Fahd University of Petroleum and Minerals.

Aspect of Permian Paleowind Directions in the Unayzah-A Reservoir, Subsurface Eastern Central Saudi Arabia, Utilizing Integrated Core and Image Log Data. Masters thesis, King Fahd University of Petroleum and Minerals.

Assessing the use of Local Indigenous Microorganisms for the Bioremediation of Sites Contaminated with Petroleum Hydocarbons. Masters thesis, King Fahd University of Petroleum and Minerals.

(2010) High-Resolution Sequence Stratigraphy of Lower Fadhili Reservoir in Khurais Field, Central Saudi Arabia. Masters thesis, King Fahd University of Petroleum and Minerals.

(2010) Integration Study of Carbonate Reservoir Utilizing Hydraulic Unit and Saturation-Height Modelling Approach. Masters thesis, King Fahd University of Petroleum and Minerals.

Information and Computer Science

Hierarchal Clustering Algorithm for Large Xml Data. Masters thesis, King Fahd University of Petroleum and Minerals.

Drilling Rig Scheduling Optimization. Masters thesis, King Fahd University of Petroleum and Minerals.

Writer Identification of Arabic Handwritten Documents. PhD thesis, King Fahd University of Petroleum and Minerals.

Single Asymmetric Error Correcting Codes: Improved Code Size. Masters thesis, King Fahd University of Petroleum and Minerals.

Computational Techniques to Optimize Heat Flow Design in a Disc based on Constructal Theory. Masters thesis, King Fahd University of Petroleum and Minerals.

The role and importance of component documentation in component integration phase: A system integrator�s perspective. Masters thesis, King Fahd University of Petroleum and Minerals.

Evolutionary Optimized Hybrid Computational Intelligence Models for the Prediction of Gas Components. Masters thesis, King Fahd University of Petroleum and Minerals.

Analyze the effectiveness of complexity measures in Component-based integration testing. Masters thesis, King Fahd University of Petroleum and Minerals.

(2012) Multidimensional Xml File: A New Xml File Structure. Masters thesis, King Fahd University of Petroleum and Minerals.

Mathematics

Various mathematical Properties of the Generalized Incomplete Gamma Functions with Applications. PhD thesis, King Fahd University of Petroleum and Minerals.

Group Classification and symmetry Reductions for a Class of Nonlinear Poisson Equations on the Line and certain Surfaces. Masters thesis, King Fahd University of Petroleum and Minerals.

Bazzoni Glass Conjecture on the Weak Dimension of Gaussian Rings. Masters thesis, King Fahd University of Petroleum and Minerals.

Well-posedness for a Cauchy Factorial Differential Problem with Hilfer type Fractional Derivative. Masters thesis, King Fahd University of Petroleum and Minerals.

On Noether Symmetry and Conservation Laws. Masters thesis, King Fahd University of Petroleum and Minerals.

Boundary Control of Parabolic Partial Differential Equations. Masters thesis, King Fahd University of Petroleum and Minerals.

Preconditioning Techniques for Saddle Point Problems. Masters thesis, King Fahd University of Petroleum and Minerals.

The use of Ensemble Kalman Filter for interval State Space Model with application to the weather in KSA. PhD thesis, King Fahd University of Petroleum and Minerals.

Weather Prediction with a Nonlinear State Space Model and the Ensemble Kalman Filter. PhD thesis, King Fahd University of Petroleum and Minerals.

(2011) Duals and Transforms of Ideals inPVMDs Combact and coprime packedness with Respect to Star Operations. PhD thesis, King Fahd University of Petroleum and Minerals.

Mechanical Engineering

Development of Multi-Layered Gradient Ceramic Membrane. Masters thesis, King Fahd University of Petroleum and Minerals.

Fluid Flow and Entropy Generation through a Throttling Valve. Masters thesis, King Fahd University of Petroleum and Minerals.

Degradation mechanism of thermal barrier coatings used in land-based gas turbine blades exposed to low-grade fuel impurities. Masters thesis, King Fahd University of Petroleum and Minerals.

Investigating the Effect of Turbulent Generation Device on Flow Pattern of Oil- Water Multiphase Flow in a Horizontal Pipeline. Masters thesis, King Fahd University of Petroleum and Minerals.

Development of A Continuously Operated Solar Powered Refrigeration System. Masters thesis, King Fahd University of Petroleum and Minerals.

Modeling of Thermal Performance of Liquid Flow with Nonosized Particles of Phase Change Material in Microchannels. Masters thesis, King Fahd University of Petroleum and Minerals.

Laser Melting of Moving Slab in Relation to Surface Treatment Application. Masters thesis, King Fahd University of Petroleum and Minerals.

Performance Evaluation of Seawater Counter Flow Cooling Tower. Masters thesis, King Fahd University of Petroleum and Minerals.

Modeling and Analysis of Hybrid PV/Wind off Grid Power Generation Systemin the Kingdom of Saudi Arabia. Masters thesis, King Fahd University of Petroleum and Minerals.

(2011) Performance Characteristics of Solar Air Heated HDH Desalination System. Masters thesis, King Fahd University of Petroleum and Minerals.

Petroleum Engineering

Prediction of Mobility Profile with Minimum Real Time Measurements using Artificial Intelligence. Masters thesis, King Fahd University of Petroleum and Minerals.

Investigation of Poor Cementing behind Oil Well Casing across Arab-C and D Formations in Uthmaniyah. Masters thesis, King Fahd University of Petroleum and Minerals.

Evaluation of Drilling Designs for Smart MRC Well Applied in Saudi Aramco. Masters thesis, King Fahd University of Petroleum and Minerals.

(2011) Full Field Production Facility Optimization Using Sequential Quadratic Programming. Masters thesis, King Fahd University of Petroleum and Minerals.

(2010) Improving Water Flooding Performance Prediction Using Streamline Simulation. Masters thesis, King Fahd University of Petroleum and Minerals.

(2011) Realtime Rate Allocation for Multilateral Wells. Masters thesis, King Fahd University of Petroleum and Minerals.

lndustrial and Systems Engineering

Benchmarking Maintenance Systems in Procter and Gamble. Masters thesis, King Fahd University of Petroleum and Minerals.

Managing Risk and Resilience in Supply Chain and 3 PL: Conceptual Development and Proposed Frameworks. Masters thesis, King Fahd University of Petroleum and Minerals.

Multi-Objective Optimization Model for Therefore, Process Targeting. Masters thesis, King Fahd University of Petroleum and Minerals.

Evaluating the Effectiveness of Methods for Converting Ranking into Weights with Application for Maintenance Contractor Selection. Masters thesis, King Fahd University of Petroleum and Minerals.

(2011) PROCESS ENHANCEMENT THROUGH INTEGRATED STATISTICAL AND AUTOMATIC PROCESS CONTROL TECHNIQUES. Masters thesis, King Fahd University of Petroleum and Minerals.

(2010) GAIN SCHEDULED FILTERING DESIGN FOR PARAMETER VARYING SYSTEMS. Masters thesis, King Fahd University of Petroleum and Minerals.