Accounting and Finance

(2001) A Web-based automatic outline capturing of images. Masters thesis, King Fahd University of Petroleum and Minerals.

Strategy Planning for Higher Education Project Horizon. In: King Fahd University of Petroleum & Minerals.

Aerospace Engineering

A Wave Dispersion Model for Health Monitoring of Plates with Piezoelectric Coupling in Aerospace Applications. In: 4TH Middle East Conference for NonDestructive Testing.

(2003) Experimental Investigation of the Near Wake of a Pick-up Truck. 2003 SAE Conference (2003-0).

Experimental Investigation of the Flow Around a Generic SUV. SAE Conference 2004.

(2003) Adaptive control of nonlinear Hammerstein model using NLMS filter. Electronics, Circuits and Systems, 2003. ICECS 2003. Proceedings of the 2003 10th IEEE International conference, 2.

(2007) Low Speed Calibration of Hot-Wire Anemometers. Flow Measurement & Instrumentation, 18. pp. 95-98.

(2000) Flow Control for an Airfoil with Leading-Edge Rotation: An Experimental Study. Journal of Aircraft, 37 (4). pp. 617-622.

(2002) PIV Measurements of Cross-flow Velocity field in the Near Wake of a Pickup Truck. Technical Report.

(2002) Experimental Investigation of the Near Wake of a Sport Utility Vehicle (SUV). Technical Report.

AE-499 Bell Helicopter model 407 _Project Presentation. Other. AE Department. (Submitted)

AE-499 Bell Helicopter model 407 _Project Report. Project Report. AE Department. (Submitted)

AE 520 FUNDAMENTAL ASPECTS OF RAREFIED GAS DYNAMICS AND HYPERSONIC FLOW Project. Project Report. AE Department. (Unpublished)

AE 540 Simulation and Auto Pilot Design for BEAVER Airpalne (project_Final Report). Project Report. AE Department. (Unpublished)

AE 540 Simulation and Auto Pilot Design for BEAVER Airpalne_PROJECT PRESENTATION. Other. AE Department. (Unpublished)

AE Curriculum. AE Department. (Unpublished)

AE Department Booklet_Arabic. AE Department. (Unpublished)

AE Graduate Bulletin. AE Department. (Unpublished)

AE Program Plan. AE Department. (Unpublished)

Delta+D.Delta Wing Pitching Moment Calculation. Working Paper. AE Department. (Unpublished)

ME-489 FEA in Mechanical Engineering_Project Final Report. Project Report. AE Department. (Submitted)

ME 204 Design Problem Project. Project Report. AE Department. (Submitted)

PHYS 215 The black holes_Project. Project Report. AE Department. (Submitted)

SE 514 OPTIMAL CONTROL FOR SINGLE AND DOUBLE INVERTED PENDULUM_Project Report. Project Report. AE Department. (Submitted)

AE Experimental and Computational Methods. Discussion Paper. AE Department. (Unpublished)

Aerodynamics. Discussion Paper. AE Department. (Unpublished)

Aerodynamics Lab. Documentation. AE Department. (Unpublished)

Aerospace Engineering Department_Introduction. Documentation. AE Department. (Unpublished)

AEROSPACE SYSTEMS MAINTENANCE. Discussion Paper. AE Department. (Unpublished)

Fundamentals of Helicopter. Discussion Paper. AE Department. (Unpublished)

AEROSPACE AVIONICS. Discussion Paper. AE Department. (Unpublished)

Aero-thermodynamics of Jet Propulsion. Discussion Paper. AE Department. (Unpublished)

AIRCRAFT AVIONIC SYSTEMS. Discussion Paper. AE Department. (Unpublished)

AIRCRAFT SYSTEM MAINTENANCE. Discussion Paper. AE Department. (Unpublished)

AVIATION SAFETY. Discussion Paper. AE Department. (Unpublished)

WIND TUNNEL LABORATORY. Documentation. AE Department. (Unpublished)

AIRCRAFT NAVIGATION SYSTEMS. Discussion Paper. AE Department. (Unpublished)

Aircraft Structural Analysis. Discussion Paper. AE Department. (Unpublished)

AVIATION SAFETY AND SECURITY. Discussion Paper. AE Department. (Unpublished)

Aerodynamic-Shape Optimization of Supersonic-Missiles Using Monte-Carlo. International Review of Aerospace Engineering (I.RE.AS.E).

ELECTRONIC WARFARE. Discussion Paper. AE Department. (Unpublished)

Water Rocket Construction. Manual. AE Department. (Unpublished)

Computer Shortcuts and Special Characters. www.quickstudy.com. (Unpublished)

Satellite Engineering. Discussion Paper. AE Department. (Unpublished)

Sagr Al-Gazeera Submarine 1. AE Department. (Unpublished)

Sagr Al-Gazeera Rocket. AE Department. (Unpublished)

Sagr Al-Gazeera Airplane 3. AE Department. (Unpublished)

Flight Stability and control. Discussion Paper. AE Department. (Unpublished)

«الطيران والفضاء » يشارك في مهرجان الغضا ويعرض طائرة صقر الجزيرة 4. جريدة جامعة الملك فهد للبترول والمعادن.

تأثير كبير للبسملة على تركيبة الماء. جريدة الوطن.

Aircraft Accident Investigation. In: Aviation Safety Symposium, 10/03/2005, King Abdul Aziz Air base Dhahran.

Safety Issues in Aircraft Maintenance & Ground Operations. In: Safety Symposium, RSAF, 09/20/2006, King Abdulaziz Air Base, Dhahran.

Optimization of Maintenance Intervals for Aircraft Systems and Components. In: The Opportunity and Challenges Facing the Gulf Aviation Industry, 11/07/2007, Dharan, KSA.

KFUPM new purchasing requisitions manual. RAED Business system. (Unpublished)

خلق افعال العباد للبخاري. بخاري. (Unpublished)

روايات حديث الجارية. درر. (Unpublished)

AE351-Coop Reoprt. AE. (Unpublished)

known erors in Datcom+. holycows inc. (Unpublished)

(2008) Stochastic Finite Element Analysis of the Free Vibration of Functionally Graded Material Plates. Computational Mechanics, 41 (5). pp. 707-714.

(2007) A Micromechanical Model for Wave Propagation in Plain-Weave Textile Composites. In: AIAA Infotech@Aerospace 2007 Conference and Exhibit, May 7-10, 2007, Rohnert Park, California.

AE 410 PROJECT REPORT. Project Report. SALMAN AL-FIFI. (Unpublished)

AE 401 PROJECT REPORT. Project Report. SALMAN AL-FIFI. (Unpublished)

AE 411 PROJECT REPORT. Project Report. SALMAN AL-FIFI. (Unpublished)

AE 412 PROJECT REPORT. Project Report. SALMAN AL-FIFI. (Unpublished)

AE 422 PROJECT REPORT. Project Report. SALMAN AL-FIFI. (Unpublished)

AE 426 PROJECT REPORT. Project Report. SALMAN AL-FIFI. (Unpublished)

AE 427 PROJECT REPORT. Project Report. SALMAN AL-FIFI. (Unpublished)

AE 520 PROJECT REPORT. Project Report. SALMAN AL-FIFI. (Unpublished)

AE 530 PROJECT REPORT. Project Report. SALMAN AL-FIFI. (Unpublished)

AE 540 PROJECT REPORT. Project Report. SALMAN AL-FIFI. (Unpublished)

AE 570 PAPER REPORT. Project Report. SALMAN AL-FIFI. (Unpublished)

AE 570 PROJECT REPORT. Project Report. SALMAN AL-FIFI. (Unpublished)

MATH 513 PROJECT REPORT (DIFF. EQUATIONS). Project Report. SALMAN AL-FIFI. (Unpublished)

ME 413 PROJECR REPORT (SYSTEM CONTROL). Project Report. SALMAN AL-FIFI. (Unpublished)

Reliability Analysis of Aircraft Air Conditioning Packs. In: 3. Aircraft Engineering Symposium, December 2004, Jeddah.

AE 220 PROJECT REPORT. Project Report. SALMAN AL-FIFI. (Unpublished)

AE 325 PROJECT REPORT. Project Report. SALMAN AL-FIFI. (Unpublished)

(2002) Unsteady Pressure Measurements in a Pickup Truck Model. Technical Report.

Curriculum Vitae of Mr. Mueyyet Tozan. AE Deparment / KFUPM.

(2006) Failure Distribution Modeling for Planned Replacement of Aircraft Auxiliary Power Unit Oil Pumps. Maintenance Journal, 19 (1). pp. 60-69.

(2004) Failure Data Analysis for Aircraft Maintenance Planning. In: 3. Aircraft Engineering Symposium, December 2004, Jeddah.

AE Coop Regulations. AE Department.

AE 412 Regulations. AE Department.

(2007) FAILURE RATE ANALYSIS OF BOEING 737 BRAKES EMPLOYING NEURAL NETWORK. International Journal of Reliability, Quality and Safety Engineering. (Submitted)

NEURAL NETWORK MODEL FOR PLANNED REPLACEMENT OF BOEING 737 BRAKES. International Journal of Modeling and simulation. (Submitted)

Genetic-Based Fuzzy Logic Controller for Satellites Stabilized by Reaction Wheels and Gravity Gradient. In: AIAA-2007-6445, AIAA Guidance, Navigation and Control Conference and Exhibit, August 20-23, 2007, North Carolina.

Aerospace Engineering. Journal of Americal Applied Sciences.

(2006) Failure-Rate Prediction for De Havilland Dash-8 Tires Employing Neural-Network Technique. AIAA Journal of Aircraft, 43 (2). pp. 537-543.

(2002) Conjugate Free Convection Heat Transfer in Vertical Eccentric Annuli. Masters thesis, King Fahd University of Petroleum and Minerals.

(2007) Failure Forecasting of Aircraft Air-Conditioning/Cooling Pack with Field Data. AIAA Journal of Aircraft, 44 (3). pp. 996-1002.

(2006) Neural network-based failure rate prediction for De Havilland Dash-8 tires. Engineering applications of Artificial Intelligence, 19. pp. 681-691.

(2007) Failure Rate Analysis of Boeing 737 Brakes Employing Neural Network. In: 7th AIAA Aviation Technology, Integration and Operations Conference (ATIO), 18 - 20 September 2007, Belfast, Northern Ireland.

(2008) ARTIFICIAL NEURAL NETWORK APPLICATION OF MODELLING FAILURE RATE FOR BOEING 737 TIRES. In: Applied Simulation and Modeling Conference 2008, 23-25 June, 2008., Corfu, Greece. (Submitted)

Designing A Genetic-Based FLC For Fast Attitude Control Of Satellites with Reaction Wheels. In: Second International Conference on Modeling, Simulation and Applied Optimization, ICMSAO-07, March 24-27, 2007, Abu-Dhabi.

Suggestions about the Role of Universities in Technology Transfer for the Arab World. In: RSAF Ground Support Equipment and Spare Parts Exhibition, 17th-20th December 2005, Dharan, Saudi Arabia.

Simple Adaptive Feedback Controller for Tower Cranes. In: ASME 2001 Design Engineering Technical Conference and Computers and Information in Engineering Conference, September 9-12, 2001, Pittsburgh, PA.

The Resume' of Ahmad Jamal. Personal. (Unpublished)

Al-Garni, A. Z., Saeed, F., Al-Garni, A. M., “Experimental and Numerical Investigation of 65-deg Delta and 65/40-deg Double-Delta Wings,” AIAA Journal of Aircraft, Vol. 45, No. 1, Jan.-Feb. 2008, pp. 71-76. AIAA Journal.

Architectural Engineering and Construction Management

(2004) Potential impact of the WTO on Saudi construction firms. Masters thesis, King Fahd University of Petroleum and Minerals.

(2005) Efficacy of contractor prequalification models. Masters thesis, King Fahd University of Petroleum and Minerals.

(2005) HVAC system operation strategies for energy conservation and thermal comfort in commercial buildings in Saudi Arabia. Masters thesis, King Fahd University of Petroleum and Minerals.

(2005) The impact of HVAC system selection and operation on energy conservation in an office building in hot and humid climates of Saudi Arabia. Masters thesis, King Fahd University of Petroleum and Minerals.

(2005) Evaluation of performance measures for materials management process in industrial construction projects. Masters thesis, King Fahd University of Petroleum and Minerals.

(2006) Envelope design for thermal comfort and reduced energy consumption in residential buildings. Masters thesis, King Fahd University of Petroleum and Minerals.

(1992) Enforcing the role of construcion insurance in Saudi Arabia. Masters thesis, King Fahd University of Petroleum and Minerals.

(1991) Construction cost control in the Eastern Province of Saudi Arabia. Masters thesis, King Fahd University of Petroleum and Minerals.

(2001) Assessment of factors affecting building maintenance management auditing in Saudi Arabia. Masters thesis, King Fahd University of Petroleum and Minerals.

(2000) Project/process simulation modeling using discrete event construction simulation language stroboscope. Masters thesis, King Fahd University of Petroleum and Minerals.

(2001) Assessment of constructability practices among general contractors in the Eastern Province of Saudi Arabia. Masters thesis, King Fahd University of Petroleum and Minerals.

(1996) The relationship between the project size and the safety level in building construction projects. Masters thesis, King Fahd University of Petroleum and Minerals.

(1996) Cost estimation practice for buildings by A/E firms in the Eastern Province, Saudi Arabia. Masters thesis, King Fahd University of Petroleum and Minerals.

(1995) Concrete repair with silica fume shotcrete. Masters thesis, King Fahd University of Petroleum and Minerals.

(1989) Determination of construction contract duration for public projects in Saudi Arabia. Masters thesis, King Fahd University of Petroleum and Minerals.

(1992) Multiple objective LP (MOLP) for scheduling repetitive projects. Masters thesis, King Fahd University of Petroleum and Minerals.

(2002) Impact of building rezoning and change of use on energy consumption and occupants thermal comfort. Masters thesis, King Fahd University of Petroleum and Minerals.

(1996) Budget estimating models for the construction cost of public school building in Saudi Arabia. Masters thesis, King Fahd University of Petroleum and Minerals.

(2001) Build operate transfer (BOT) project delivery system in Saudi Arabia. Masters thesis, King Fahd University of Petroleum and Minerals.

(1997) Overhad costs in building construction in Saudi Arabia. Masters thesis, King Fahd University of Petroleum and Minerals.

(1993) The effects of faulty design and construction on building maintenance. Masters thesis, King Fahd University of Petroleum and Minerals.

(1999) Measuring quality in the service industry. Masters thesis, King Fahd University of Petroleum and Minerals.

(2004) Assessment of risk management perceptions and practices of construction contractors in Saudi Arabia. Masters thesis, King Fahd University of Petroleum and Minerals.

(1993) Subjective assessment of indoor air quality in office buildings. Masters thesis, King Fahd University of Petroleum and Minerals.

(1992) Owners satisfaction with consultancy practices in Saudi Arabia. Masters thesis, King Fahd University of Petroleum and Minerals.

(1990) The influence of owner involvement during construction process on projects quality. Masters thesis, King Fahd University of Petroleum and Minerals.

(1997) A Life cycle costing model for small reverse osmosis water treatment facilities. Masters thesis, King Fahd University of Petroleum and Minerals.

(1998) Priority-rating of public building maintenance work in Saudi Arabia. Masters thesis, King Fahd University of Petroleum and Minerals.

(1993) Floor finishing materials & systems: an expert system for evaluation and selection. Masters thesis, King Fahd University of Petroleum and Minerals.

(1994) Assessment of the Problems facing the maintenance industry in Saudi Arabia. Masters thesis, King Fahd University of Petroleum and Minerals.

(1990) Factors affecting the accuracy of construction costs estimating in Saudi Arabia. Masters thesis, King Fahd University of Petroleum and Minerals.

(2000) Assessment of HVAC systems design and operation for indoor air quality in Saudi Arabia. Masters thesis, King Fahd University of Petroleum and Minerals.

(2000) Assessment of safety measures in the design of residential buildings in Saudi Arabia. Masters thesis, King Fahd University of Petroleum and Minerals.

(1997) Factors affecting construction costs in Saudi Arabia. Masters thesis, King Fahd University of Petroleum and Minerals.

(2004) An implementation model for design-build (D-B) project delivery system. Masters thesis, King Fahd University of Petroleum and Minerals.

(1998) Computerized multiple criteria decision making model for projects planning and implementation. Masters thesis, King Fahd University of Petroleum and Minerals.

(2003) Cost implications of architectural dlesign variables. Masters thesis, King Fahd University of Petroleum and Minerals.

(1996) Developing a price index for school projects in Saudi Arabia. Masters thesis, King Fahd University of Petroleum and Minerals.

(1995) Toward standardization of public building maintenance contracts in Saudi Arabia. Masters thesis, King Fahd University of Petroleum and Minerals.

(1996) Design for systems replacement in buildings. Masters thesis, King Fahd University of Petroleum and Minerals.

(1993) Factors affecting quality of pavement construction in Saudi Arabia. Masters thesis, King Fahd University of Petroleum and Minerals.

(2002) Investigating smart classroom acoustics utilizing computer modeling. Masters thesis, King Fahd University of Petroleum and Minerals.

(1993) An expert system for concrete diagnosis. Masters thesis, King Fahd University of Petroleum and Minerals.

(1992) Evaluation of contract administration for public projects in Saudi Arabia. Masters thesis, King Fahd University of Petroleum and Minerals.

(1997) Equipment management policy of major construction contractors in the Eastern Province of Saudi Arabia. Masters thesis, King Fahd University of Petroleum and Minerals.

(1999) An overview of the construction industry in the Kingdom of Saudi Arabia, 1390AH-1415AH (1970-1995). Masters thesis, King Fahd University of Petroleum and Minerals.

(1995) Delay in the Construction of public utility projects in Saudi Arabia. Masters thesis, King Fahd University of Petroleum and Minerals.

(1995) Evaluation of work sampling as an indicator of construction labor productivity. Masters thesis, King Fahd University of Petroleum and Minerals.

(2001) Evaluation of the construction equipment replacement policies of construction contractors in the Eastern Province of Saudi Arabia. Masters thesis, King Fahd University of Petroleum and Minerals.

(1998) Development of mechanical works' assembly cost data model for residential buildings in Saudi Arabia. Masters thesis, King Fahd University of Petroleum and Minerals.

(1990) Feasibility & development of an Arabic/English computer-aided detailed estimating system. Masters thesis, King Fahd University of Petroleum and Minerals.

(1997) Quality management practices among A/E organizations. Masters thesis, King Fahd University of Petroleum and Minerals.

(1991) Feasibility of Adobe as a construction material : a case study. Masters thesis, King Fahd University of Petroleum and Minerals.

(1987) Construction financing in Saudi Arabia. Masters thesis, King Fahd University of Petroleum and Minerals.

(2000) Change orders in construction projects in Saudi Arabia. Masters thesis, King Fahd University of Petroleum and Minerals.

(1999) Measuring the effectiveness of materials management for industrial construction projects in Saudi Arabia. Masters thesis, King Fahd University of Petroleum and Minerals.

(1996) Comparison of accepted procedures for determining schedule and cost impact. Masters thesis, King Fahd University of Petroleum and Minerals.

(1997) Assessment of application of life cycle cost on construction projects. Masters thesis, King Fahd University of Petroleum and Minerals.

(1999) Safety performance measuremnts: a PC-basd evaluation tool for industrial contractors in Saudi Arabia. Masters thesis, King Fahd University of Petroleum and Minerals.

(1998) A Conceptual model for consultant selection in Saudi Arabia. Masters thesis, King Fahd University of Petroleum and Minerals.

(1994) Liability allocation among the parties to fixed-price construction contracts in Saudi Arabia. Masters thesis, King Fahd University of Petroleum and Minerals.

(1993) Causes of contractors' failures in Saudi Arabia. Masters thesis, King Fahd University of Petroleum and Minerals.

(2001) Safety assessment of industrial construction projects in Saudi Arabia. Masters thesis, King Fahd University of Petroleum and Minerals.

(1994) Developing a concrete cost estimating model for small residential buildings. Masters thesis, King Fahd University of Petroleum and Minerals.

(1996) Contractors quality systems-assessment to the ISO 9000 standard. Masters thesis, King Fahd University of Petroleum and Minerals.

(2003) Critical success factor for different project objectives. Masters thesis, King Fahd University of Petroleum and Minerals.

(1994) Construction productivity awareness and improvement programs in Saudi Arabia. Masters thesis, King Fahd University of Petroleum and Minerals.

(1993) Computerized conceptual-cost-estimating system for domestic water supply projets. Masters thesis, King Fahd University of Petroleum and Minerals.

(2005) Efficacy of contractor prequalification models. Masters thesis, King Fahd University of Petroleum and Minerals.

(1994) Computer utilization by construction contractors in Saudi Arabia. Masters thesis, King Fahd University of Petroleum and Minerals.

(1988) Performance study of the lowest bidder bid awarding system in government projects - Saudi Arabia. Masters thesis, King Fahd University of Petroleum and Minerals.

(1996) Waterproofing of roofs of residential buildings in Saudi Arabia. Masters thesis, King Fahd University of Petroleum and Minerals.

(1994) The relationship of fee structure in engineering offices and design deficiency. Masters thesis, King Fahd University of Petroleum and Minerals.

(1997) Assessment of safety level in performing building maintenance work in Saudi Arabia. Masters thesis, King Fahd University of Petroleum and Minerals.

(1991) Thermal insulation economics for Saudi residential buildings. Masters thesis, King Fahd University of Petroleum and Minerals.

(2004) Potential impact of the WTO on Saudi construction firms. Masters thesis, King Fahd University of Petroleum and Minerals.

(1994) Development of an expert system for evaluating the environmental quality of office buildings. Masters thesis, King Fahd University of Petroleum and Minerals.

(2004) Assessment of automating facilities management current practices: potential framework models for Saudi Arabian Universities. Masters thesis, King Fahd University of Petroleum and Minerals.

(2004) A model for benchmarking contractors project management elements in Saudi Arabia. Masters thesis, King Fahd University of Petroleum and Minerals.

(1995) Computerized AHP model for solving Bid/no-Bid decision problem. Masters thesis, King Fahd University of Petroleum and Minerals.

(1991) Systematic examination techniques for planning and scheduling among Saudi Arabian construction firms. Masters thesis, King Fahd University of Petroleum and Minerals.

(2006) Contaminant behavior and distribution in mechanically ventilated multi-zone building. Masters thesis, King Fahd University of Petroleum and Minerals.

(1989) Joint Ventures in construction firms in Saudi Arabia. Masters thesis, King Fahd University of Petroleum and Minerals.

(1990) Factors affecting bidding and markup decisions in Saudi Arabia. Masters thesis, King Fahd University of Petroleum and Minerals.

(2006) Evaluation of consultant performance. Masters thesis, King Fahd University of Petroleum and Minerals.

(1991) Contractor prequalification : a computerized model for public projects in Bahrain. Masters thesis, King Fahd University of Petroleum and Minerals.

(1993) Quality management ativities in design and construction phases in Saudi Arabia. Masters thesis, King Fahd University of Petroleum and Minerals.

(1991) Construction Cost Control in the Eastern Province of Saudi Arabia. Masters thesis, KING FAHD UNIVERSITY OF PETROLEUM & MINERALS.

(1992) Enforcing the Role of Construction Insurance in Saudi Arabia. Masters thesis, KING FAHD UNIVERSITY OF PETROLEUM & MINERALS.

(1992) Multiple Objective LP (MOLP) For Scheduling Repetitive Projects. Masters thesis, KING FAHD UNIVERSITY OF PETROLEUM & MINERALS.

(1992) Evaluation of Contract Administration For Public Projects in Saudi Arabia. Masters thesis, KING FAHD UNIVERSITY OF PETROLEUM & MINERALS.

(1991) Contractor Prequalification: A Computerized Model for Public Projects in Bahrain. Masters thesis, KING FAHD UNIVERSITY OF PETROLEUM & MINERALS.

(1991) Thermal Insulation Economics For Saudi Residential Buildings. Masters thesis, KING FAHD UNIVERSITY OF PETROLEUM & MINERALS.

(1993) Quality Management Activities in Design And Construction Phases in Saudi Arabia. Masters thesis, KING FAHD UNIVERSITY OF PETROLEUM & MINERALS.

(1993) The Effects of Faulty Design and Construction of Building Maintenance. Masters thesis, KING FAHD UNIVERSITY OF PETROLEUM & MINERALS.

(1993) Causes of Contractors’ Failures in Saudi Arabia. Masters thesis, KING FAHD UNIVERSITY OF PETROLEUM & MINERALS.

(1993) Factors Affecting Quality of Pavement Construction in Saudi Arabia. Masters thesis, KING FAHD UNIVERSITY OF PETROLEUM & MINERALS.

(1991) Feasibility of Adobe as a Construction Material A Case Study. Masters thesis, KING FAHD UNIVERSITY OF PETROLEUM & MINERALS.

THE FORMULATION OF A BUILDING THERMAL DESIGN OPTIMIZATION MODEL. NCC1997.

MAJOR COMPONENTS OF “TYPICAL VILLA” IN SAUDI ARABIA FOR PRICE/COST INDEX DEVELOPMENT. The 6th Saudi Engineering Conference, KFUPM, Dhahran, December 2002.

THE IMPACT OF CYBERSPACE AND GLOBALIZATION ON THE FUTURE OF ARCHITECTURE: VISIONARY INSIGHT. The 6th Saudi Engineering Conference, KFUPM, Dhahran, December 2002.

THE IMPACT OF FILTER PLACEMENT IN AIR-CONDITIONING SYSTEMS ON THE BEHAVIOR OF INDOOR CONTAMINANT CONCENTRATION. The 6th Saudi Engineering Conference, KFUPM, Dhahran, December 2002.

PRACTICES OF SAFETY DESIGN OF SAUDI RESIDENTIAL BUILDINGS. The 6th Saudi Engineering Conference, KFUPM, Dhahran, December 2002.

Architecture and City Design Department

(1995) Novel optical gates for data acquisition and processing: opticalwavelength division multiplexer. Instrumentation and Measurement Technology Conference, 1995. IMTC/95. Proceedings. 'Integrating Intelligent Instrumentation and Control'., IEEE, 1.

EXPLORING THE FACTORS THAT AFFECT THE EFFICIENT UTILIZATION OF IT IN CONSULTING OFFICES. The 6th Saudi Engineering Conference, KFUPM, Dhahran, December 2002.

ARCHITECTURAL DESIGN STUDIO PROJECTS AND THE CHARADES OF CURRICULUM. The 6th Saudi Engineering Conference, KFUPM, Dhahran, December 2002.

STUDENT EVALUATION OF FACULTY: A MIRROR FOR SELF ANALYSIS. The 6th Saudi Engineering Conference, KFUPM, Dhahran, December 2002.

Chemical Engineering

Effect of Reaction Pressure and Carrier Gas on Toluene Disproportionation over Molybdenum-ZSM-5 Catalyst. Energy & Fuels (2008),, 22(1),.

Characterization of tungstophosphoric acid supported on MCM-41 mesoporous silica by using n-hexane cracking, benzene adsorption, and xray diffraction. Applied Catalysis, A: General (2001),, 207(1,.

Catalytic cracking of polyethylene over all-silica MCM-41 molecular sieve. Applied Catalysis, A: General (2002) (225(1-).

Barium modification of a high-silica zeolite for methanol conversion to light alkenes. Applied Catalysis, A: General (1992), (91(1),).

Effects of metal impregnation on the activity, selectivity and deactivation of a high silica MFI zeolite when converting methanol to light alkenes. Applied Catalysis, A: General (1997),, 154(1-.

(1997) New fault models and efficient BIST algorithms for dual-portmemories. Computer-Aided Design of Integrated Circuits and Systems, IEEE Transactions on, 16.

(1998) Robust control of sampled data systems. Control Theory and Applications, IEE Proceedings -, 145.

(1991) An intelligent EPROM silicon compiler. Communications, Computers and Signal Processing, 1991., IEEE Pacific Rim conference, 1.

(2001) New efficient frequency domain algorithm for H∞approximation with applications to controller reduction. Control Theory and Applications, IEE Proceedings -, 148.

(1996) Generic DFT approach for pattern sensitive faults in word-orientedmemories. Computers and Digital Techniques, IEE Proceedings -, 143.

(1992) Design, selection and implementation of flash erase EEPROM memorycells. Circuits, Devices and Systems, IEE Proceedings G, 139.

(0000) High-speed self-timed carry-skip adder. Circuits, Devices and Systems, IEE Proceedings -, 153.

(2001) Error bounds in approximating time-delay systems. Decision and Control, 2001. Proceedings of the 40th IEEE conference, 2.

(1999) Parametric uncertainty bounds for guaranteedH∞-norm specifications. American Control Conference, 1999. Proceedings of the 1999, 4.

(2004) On the use of L/sub 2/ gap metric for identifying Hammersteim models. Control Conference, 2004. 5th Asian, 1.

(2000) Approximation of time-delay systems. American Control Conference, 2000. Proceedings of the 2000, 4.

(1993) Design and analysis of a high-speed sense amplifier forsingle-transistor nonvolatile memory cells. Circuits, Devices and Systems, IEE Proceedings G, 140.

(1993) Speed optimised array architecture for flash EEPROMs. Circuits, Devices and Systems, IEE Proceedings G, 140.

Efficient O(n) BIST algorithms for DDNPS faults in dual portmemories. Test Conference, 1994. Proceedings., International, 1.

(1994) Parallelism analysis and extraction of digital signal processingalgorithms. Signals, Systems and Computers, 1994. 1994 Conference Record of the Twenty-Eighth Asilomar conference, 2.

(2003) Double-rail encoded self-timed adder with matched delays. Electronics, Circuits and Systems, 2003. ICECS 2003. Proceedings of the 2003 10th IEEE International conference, 3.

(1991) A novel flash erase EEPROM memory cell with reversed poly roles. Electrotechnical Conference, 1991. Proceedings., 6th Mediterranean, 1.

(2004) Numerical investigations of flow in a partially packed vessel. Masters thesis, King Fahd University of Petroleum and Minerals.

(2006) Methanol permeation through proton exchange membranes of direct methanol fuel cells. Masters thesis, King Fahd University of Petroleum and Minerals.

(2005) Studies on high performance NI-based composite catalysts for preferential methanation of CO in a SYNGAS. Masters thesis, King Fahd University of Petroleum and Minerals.

(2004) Diffusion and adsorption of aromatics in zeolites by zero length column technique. Masters thesis, King Fahd University of Petroleum and Minerals.

(2004) Kinetics and equilibrium adsorption of phosphates removal on activated alumina. Masters thesis, King Fahd University of Petroleum and Minerals.

(2006) Studies on catalysts for preferential oxidation of CO in H2-Rich gas mixture. Masters thesis, King Fahd University of Petroleum and Minerals.

(2004) Influence of polymer type and structure on polymer modification of Saudi asphalt. Masters thesis, King Fahd University of Petroleum and Minerals.

(2005) Structure-property relationships of metallocene linear low density polyethylene (LLDPE). Masters thesis, King Fahd University of Petroleum and Minerals.

(2005) Development and application of linear state estimators in control of reactive distillation. Masters thesis, King Fahd University of Petroleum and Minerals.

(2004) Investigations of the flow and pinning phenomena in radial flow reactors. Masters thesis, King Fahd University of Petroleum and Minerals.

(2004) Rheology of gelling polymers used in reservoir water shutoff treatments. Masters thesis, King Fahd University of Petroleum and Minerals.

(2005) Electrochemical removal of carbon monoxide from hydrogen using nickel catalyst. Masters thesis, King Fahd University of Petroleum and Minerals.

(2005) Numerical investigations of melting of ice in a box. Masters thesis, King Fahd University of Petroleum and Minerals.

(2006) Strength and durability characteristics of aluminum joints bonded by rubber-modified and aluminum filled epoxy adhesive. Masters thesis, King Fahd University of Petroleum and Minerals.

(2004) Numerical and experimental studies of non reactive and reactive mixing. Masters thesis, King Fahd University of Petroleum and Minerals.

(2005) Extraction of aromatics using green solvents based on ionic liquids. Masters thesis, King Fahd University of Petroleum and Minerals.

(1971) Air separation on carbon molecular sieves, 4A and 5A zeolites by pressure swing adsorption. Masters thesis, King Fahd University of Petroleum and Minerals.

(2000) Development and analysis of transient models for the biofiltration of single and mixed volatile organic compounds. Masters thesis, King Fahd University of Petroleum and Minerals.

(1992) Activity of Ni/A1 O catalyst for a methanation reaction. Masters thesis, King Fahd University of Petroleum and Minerals.

(2002) Protein partitioning in pH-responsive polymeric amino acid and assocating polymers. Masters thesis, King Fahd University of Petroleum and Minerals.

(1992) Density-temperature behavior of pure and defined binary and ternary hydrocarbon mixtures. Masters thesis, King Fahd University of Petroleum and Minerals.

(2001) Theoretical potential scans and vibrational spectra of two rotors halomethyl isocyanates. Masters thesis, King Fahd University of Petroleum and Minerals.

(2004) Modeling and simulation of a combined isomerization reactor/pressures swing adsorption/membrane unit. Masters thesis, King Fahd University of Petroleum and Minerals.

(2001) Numerical simulation of one- and two-phase flows in unpacked and partially packed vessels. Masters thesis, King Fahd University of Petroleum and Minerals.

(2000) Bulk separation of binary gas mixtures by pressure swing adsorption. Masters thesis, King Fahd University of Petroleum and Minerals.

(1995) Development of Raney-Ni gas diffusion electrodes for fuel-cells. PhD thesis, King Fahd University of Petroleum and Minerals.

(1997) Solution behavior of hydrophobic non-ionic and ionic polymers. Masters thesis, King Fahd University of Petroleum and Minerals.

(2002) Copper recovery from wastewater using an electrochemical rotating barrel reactor. Masters thesis, King Fahd University of Petroleum and Minerals.

(1992) Numerical simulation of continuous countercurrent adsorption systems. Masters thesis, King Fahd University of Petroleum and Minerals.

(2000) Ethylene oligomerization to olefins on supported nickel catalyst. Masters thesis, King Fahd University of Petroleum and Minerals.

(2004) Numerical analysis of entropy generation in laminar viscous fluid flow between parallel plates. Masters thesis, King Fahd University of Petroleum and Minerals.

(2000) Computational study of conformational behavior and analyses of vibrational spectra of some ketenes. Masters thesis, King Fahd University of Petroleum and Minerals.

(1998) Investigation of transient heat transfer in a rectangular packed duct with asymmetric heating. Masters thesis, King Fahd University of Petroleum and Minerals.

(2000) Modeling of adsorption-reaction phenomena on activated carbon. Masters thesis, King Fahd University of Petroleum and Minerals.

(1994) Solution properties of sidechain polymers for enhanced oil recovery. Masters thesis, King Fahd University of Petroleum and Minerals.

(2000) Modeling of hydrodynamics and mass transfer in cocurrent packed columns. Masters thesis, King Fahd University of Petroleum and Minerals.

(2000) Hydrogen bonding in polymer blends: effect on glass transition temperature. Masters thesis, King Fahd University of Petroleum and Minerals.

(2004) Hydrocracking catalysts for vacuum gas oil and de-metallized oil blend. Masters thesis, King Fahd University of Petroleum and Minerals.

(1990) Methanol conversion to light olefins over commercial zeolites. Masters thesis, King Fahd University of Petroleum and Minerals.

(1999) Modeling and simulation of a downer-type fluid catalytic cracking unit. Masters thesis, King Fahd University of Petroleum and Minerals.

(2003) Theoretical analysis and simulation of immobilized enzyme reactors. Masters thesis, King Fahd University of Petroleum and Minerals.

(1996) Bifurcation phenomena in non-isothermal reactive gas absorption. Masters thesis, King Fahd University of Petroleum and Minerals.

(2001) A Study of corrosion control of mild steel using inhibitors under atmospheric conditions. Masters thesis, King Fahd University of Petroleum and Minerals.

(2004) Corrosion behavior of mild steel under atmospheric and accelerated conditions after treatment by several inhibitor solutions. Masters thesis, King Fahd University of Petroleum and Minerals.

(1995) Investigation of heat transfer in a rectangular packed duct with constant heat flux and asymmetrical wall temperatures. Masters thesis, King Fahd University of Petroleum and Minerals.

(1996) Studies of the terephthalic acid and dihydroxy diphenyl sulfone liquid crystalline copolymer and its composites. Masters thesis, King Fahd University of Petroleum and Minerals.

(2000) The effect of unit cell size on the activity and selectivity of FCC catalysts. Masters thesis, King Fahd University of Petroleum and Minerals.

(2002) Investigations of mixing in pipelines with side-, opposed-, and multiple-tees. Masters thesis, King Fahd University of Petroleum and Minerals.

(2004) Study of natural convection from cylindrical surfaces embedded in porous media by LDCT. Masters thesis, King Fahd University of Petroleum and Minerals.

(2003) Metal incorporation in MCM-41 for hydrodesulfurization. Masters thesis, King Fahd University of Petroleum and Minerals.

(2002) Deactivation of dehydration adsorbents. PhD thesis, King Fahd University of Petroleum and Minerals.

(1993) Steady state experimental evaluation of a Novel raney-Ni/PTFE gas diffusion electrode in an alkaline fuel cell. Masters thesis, King Fahd University of Petroleum and Minerals.

(1996) Stabilization of Raney Nickel catalyst for fuel cell electrodes. Masters thesis, King Fahd University of Petroleum and Minerals.

(2000) Modeling and simulation of a combined isomerizaion reactor/pressures swing adsorption unit. Masters thesis, King Fahd University of Petroleum and Minerals.

(1996) Modeling of transient gas-solid reactions in a fixed-based reactor. Masters thesis, King Fahd University of Petroleum and Minerals.

(1992) Steady state multiplicity in gas-liquid CSTRs. Masters thesis, King Fahd University of Petroleum and Minerals.

(2004) Xylene stransformation over Y zeolite in a fluidized-bed reactor. Masters thesis, King Fahd University of Petroleum and Minerals.

(1990) Unsteady state performance of porous gas-diffusion electrodes in alkaline fuel cell. Masters thesis, King Fahd University of Petroleum and Minerals.

(2000) A study of protein partinioning in two phase aqueous solutions of random and multi-block capolymers. Masters thesis, King Fahd University of Petroleum and Minerals.

(1993) Separation process for the recovery of desalted water and chemical products from indigenous saline water resources. PhD thesis, King Fahd University of Petroleum and Minerals.

(1992) Hydrogen production by the electrolysis of saline water. Masters thesis, King Fahd University of Petroleum and Minerals.

(2000) Experimental investigation of hydrogen spillover on Co-Clay hydrotreating catalysts by noble metals. Masters thesis, King Fahd University of Petroleum and Minerals.

(2000) Mixture models for dense fluids and polymers. Masters thesis, King Fahd University of Petroleum and Minerals.

(1980) Dearomatization of naphtha cuts from Saudi Arabian crudes using different selective solvents. Masters thesis, King Fahd University of Petroleum and Minerals.

(1996) A Study of rheology and interfacial activity of amphiphilic block copolymers for enhanced oil recovery. Masters thesis, King Fahd University of Petroleum and Minerals.

(1984) Comparison of binary sorption of propane and N-butane on 5A and 13X Zeolites. Masters thesis, King Fahd University of Petroleum and Minerals.

(1997) Non-catalytic partial oxidation of sour natural gas. Masters thesis, King Fahd University of Petroleum and Minerals.

(1992) Binary separations by pressure swing adsorption processes. PhD thesis, King Fahd University of Petroleum and Minerals.

(1981) Two dimensional mathematical model of evacuated tubular solar collector. Masters thesis, King Fahd University of Petroleum and Minerals.

(1984) Packed-bed adsorption of phenol and 2, 4 dichlorophenoxy acetic acid on the macroreticular resin XAD-7. Masters thesis, King Fahd University of Petroleum and Minerals.

(1985) A Study of copper recovery by liquid membrane containing a chelating agent. Masters thesis, King Fahd University of Petroleum and Minerals.

(1975) Corrosion of steel in the Arabian environment. Masters thesis, King Fahd University of Petroleum and Minerals.

(2000) Modeling of a nonisothermal tubular reactor packed with immobilized enzyme systems. Masters thesis, King Fahd University of Petroleum and Minerals.

(1995) Analysis of packed bed biofilm reactor under single and multiple substrate utilization. Masters thesis, King Fahd University of Petroleum and Minerals.

(2003) Investigation of degradation of NBR and HNBR elastomers by light scattering rheology and molecular dynamics techniques. Masters thesis, King Fahd University of Petroleum and Minerals.

(1995) Optimization of continuous counter current adsorption systems. Masters thesis, King Fahd University of Petroleum and Minerals.

(2004) Photophysical behavior of 1,8-diaminonaphthalene in acidic aqueous solutions and in zeolite sieves. Masters thesis, King Fahd University of Petroleum and Minerals.

(1992) Modeling of fluidised-bed reactors; generalisation of the Werther model. Masters thesis, King Fahd University of Petroleum and Minerals.

(2002) Electropolymerization of pyrrole on mild steel for corrosion protection. Masters thesis, King Fahd University of Petroleum and Minerals.

(1994) Adsorption of light gases and their mixtures on SR-115 and ETS-10 Zeolites. Masters thesis, King Fahd University of Petroleum and Minerals.

(1997) Model-based controller design for a continuous pulping reactor. Masters thesis, King Fahd University of Petroleum and Minerals.

(1996) Experimental investigation of biofilter parameters. Masters thesis, King Fahd University of Petroleum and Minerals.

(2003) Influence of molecular parameters on the miscibility of metallocene LLDPE and HDPE blends: rheological and molecular dynamics simulation investigation. Masters thesis, King Fahd University of Petroleum and Minerals.

(1984) Effects of hydrogen sulfide, ammonia and water on catalytic hydrogenation of propylbenzene. Masters thesis, King Fahd University of Petroleum and Minerals.

(2004) Numerical investigations of flow in a partially packed vessel. Masters thesis, King Fahd University of Petroleum and Minerals.

(2003) Simulation of a simulated moving bed reactor for hydrocarbon isomerization. Masters thesis, King Fahd University of Petroleum and Minerals.

(2005) Synthesis and characterization of composite polymeric membranes for proton exchange membrane (PEM) fuel cell applications. Masters thesis, King Fahd University of Petroleum and Minerals.

(1997) Performance of biofilters under non-isothermal conditions. Masters thesis, King Fahd University of Petroleum and Minerals.

(1995) Modeling of Multicomponent gas-solid reactions. Masters thesis, King Fahd University of Petroleum and Minerals.

(1985) Kinetic study of ethylene oxidation using silver catalyst in a Berty reactor. Masters thesis, King Fahd University of Petroleum and Minerals.

(2003) Preparation and characterization of polypropylene/palm fiber composites. Masters thesis, King Fahd University of Petroleum and Minerals.

(1988) Equilibrium adsorption of light alkanes and their mixtures at high pressure on 5A, 13X and S-115 adsorbents. Masters thesis, King Fahd University of Petroleum and Minerals.

(1981) Measurements on wall turbulence. Masters thesis, King Fahd University of Petroleum and Minerals.

(1997) Convective heat transfer characteristics in the rectangular packed beds with asymmetric heating. Masters thesis, King Fahd University of Petroleum and Minerals.

(1988) Hydrogen transfer cracking of Arabian vacuum residuum in tetralin. Masters thesis, King Fahd University of Petroleum and Minerals.

(2003) Removal of heavy metal ions using a novel integrated electrolytic-electrodialytic process. Masters thesis, King Fahd University of Petroleum and Minerals.

Moisture diffusion into palm/polypropylene composites in sodium chloride solutions. Journal of Applied Polymer Science.

(2002) Catalytic Conversion of Waste Plastics/Petroleum Resid Mixtures into Transportation Fuels. In: National Meeting of American Chemical Society, Boston.

(2007) Useful Liquid Products from the Pyrolysis of Mixed Plastics. In: 234th ACS National Meeting & Exposition.

(2004) Study on the Conversion of Waste Plastics/Petroleum Resid Mixtures to Transportation Fuels. Journal of Material Cycles and Waste Management, 6. pp. 27-34.

(2006) Catalytic Processing of Waste Plastics With/Without Petroleum Resid – An Economic Evaluation. Energy Sources A, 28 (15). pp. 1353-1363.

(1995) Techno-economics Evaluation of Waste Lube Oil Rerefining. Inter. J. Production Economics, 42. pp. 263-273.

(1993) Steady state experimental evaluation of a novel Raney-Ni/PTFE gas diffusion electrode in an alkaline fuel cell. Masters thesis, King Fahd University of Petroleum and Minerals.

(1992) Steady State Multiplicity In Gas-Liquid CSTRs. Masters thesis, KING FAHD UNIVERSITY OF PETROLEUM & MINERALS.

(1992) Numerical Simulation of Continuous Countercurrent Adsorption Systems. Masters thesis, KING FAHD UNIVERSITY OF PETROLEUM & MINERALS.

(1992) Density-Temperature Behavior of Pure And Defined Binary and Ternary Hydrocarbon Mixtures. Masters thesis, KING FAHD UNIVERSITY OF PETROLEUM & MINERALS.

(1992) Hydrogen Production by The Electrolysis of Saline Water. Masters thesis, KING FAHD UNIVERSITY OF PETROLEUM & MINERALS.

(1993) Steady State Experimental Evaluation of a Novel Raney-Ni/PTFE Gas Diffusion Electrode in an Alkaline Fuel Cell. Masters thesis, KING FAHD UNIVERSITY OF PETROLEUM & MINERALS.

MIXING IN PIPELINES WITH SIDE-TEES. The 6th Saudi Engineering Conference, KFUPM, Dhahran, December 2002.

TECHNOLOGY OF DIRECT METHANOL FUEL CELL PROGRESS AND FUTURE PROSPECTS. The 6th Saudi Engineering Conference, KFUPM, Dhahran, December 2002.

INTEGRATING REFINING AND PETROCHEMICALS FEEDSTOCKS THROUGH A NOVEL FCC PROCESS. The 6th Saudi Engineering Conference, KFUPM, Dhahran, December 2002.

INFLUENCE OF BRANCH CONTENT OF ETHYLENE/1- HEXENE METALLOCENE –BASED LLDPE ON ITS MISCIBILITY WITH LDPE: A MOLECULAR DYNAMICS STUDY. The 6th Saudi Engineering Conference, KFUPM, Dhahran, December 2002.

MOLECULAR DYNAMICS SIMULATION OF THE INFLUENCE OF BRANCH CONTENT ON THE MISCIBILITY OF HDPE IN METALLOCENE OCTENE-LLDPES. The 6th Saudi Engineering Conference, KFUPM, Dhahran, December 2002.

USED OIL RECYCLING AND TREATMENT IN THE UNITED ARAB EMIRATES ECONOMICAL AND ENVIRONMENTAL ASSESSMENTS. The 6th Saudi Engineering Conference, KFUPM, Dhahran, December 2002.

STUDY OF EQUILIBRIUM ADSORPTION OF ORTHOPHOSPHATE ON ALUMINA ADSORBENTS. The 6th Saudi Engineering Conference, KFUPM, Dhahran, December 2002.

Deep desulphurization of gasoline and diesel fuels using non-hydrogen consuming techniques. Fuel 85 (2006) 1354–1363.

Chemistry

(2003) Simple design of a compact broadband microstrip antenna for mobile communication. Antennas and Propagation Society International Symposium, 2003. IEEE, 2.

(2002) An efficient test relaxation technique for combinational circuits based on critical path tracing. Electronics, Circuits and Systems, 2002. 9th International conference, 2.

(2000) Power factor correction capacitors; essentials and cautions. Power Engineering Society Summer Meeting, 2000. IEEE, 3.

(1998) Four-dimensional representation and collision detection for movingobjects. Intelligent Control (ISIC), 1998. Held jointly with IEEE International Symposium on Computational Intelligence in Robotics and Automation (CIRA), Intelligent Systems and Semiotics (ISAS), Proceedings, 1.

(2006) A Multicultural Comparison of Engineering Students. Information and Communication Technologies, 2006. ICTTA '06. 2nd, 2.

(1998) Four-dimensional representation and collision detection forpolytopic objects. Intelligent Control (ISIC), 1998. Held jointly with IEEE International Symposium on Computational Intelligence in Robotics and Automation (CIRA), Intelligent Systems and Semiotics (ISAS), Proceedings, 1.

(2002) An efficient test relaxation technique for combinational & full-scan sequential circuits. VLSI Test Symposium, 2002. (VTS 2002). Proceedings 20th IEEE, 1.

(2006) Growth of uniform layers of nanosized zeolites on 3D ordered macroporous carbon: synthesis, characterization, and catalytic evaluation. Masters thesis, King Fahd University of Petroleum and Minerals.

(2006) Internally hydrogen-bonded chiral methylenenitrones in cycloaddition reactions. Masters thesis, King Fahd University of Petroleum and Minerals.

(2006) Sequential injection analysis technique for industrial water quality control. Masters thesis, King Fahd University of Petroleum and Minerals.

(2004) Desulfurization of gasoline and diesel fuels, using non-hydrogen consuming techniques. Masters thesis, King Fahd University of Petroleum and Minerals.

(2004) Catalytic carbonylation of terminal alkyne with amine: computational and experimental investigations of regioselectivity. Masters thesis, King Fahd University of Petroleum and Minerals.

(2006) Catalytic hydroformylation of alkenes and polyalkenes: a novel approaches to catalyst synthesis, characterization and recycling. PhD thesis, King Fahd University of Petroleum and Minerals.

(1991) Chemical analysis of some penicillin and cephalosporin drugs. Masters thesis, King Fahd University of Petroleum and Minerals.

(2001) Characterization of catalytic materials containing zeolites using n-hexane cracking reaction. Masters thesis, King Fahd University of Petroleum and Minerals.

(1998) EPR study on vanadium model compounds containing nitrogen and sulfur heteroatoms. PhD thesis, King Fahd University of Petroleum and Minerals.

(1992) EPR study of vanadyl complexes with Schiff bases derived from S-Methyl-Carbodithioato-Hydrazine. Masters thesis, King Fahd University of Petroleum and Minerals.

(2001) Palladium-catalyzed regioselective carbonylative coupling of alkynes with aniline derivatives. Masters thesis, King Fahd University of Petroleum and Minerals.

(2000) Thermodynamics of solution by gas liquid chromatography of nonmesomorphic solutes in the isotropic and nematic phases of liquid crystalline solvents. Masters thesis, King Fahd University of Petroleum and Minerals.

(2000) Synthesis and study of corrosion inhibiting activity of several 1, 12-dodacanediamine derivatives. Masters thesis, King Fahd University of Petroleum and Minerals.

(1996) Chemometric optimization and kinetic developments in flow injection analysis. PhD thesis, King Fahd University of Petroleum and Minerals.

(2003) Study of octane enhancers for gasoline in the Kingdom of Saudi Arabia. Masters thesis, King Fahd University of Petroleum and Minerals.

(1990) High temperature ceramic superconductors: oxalate co-precipitation procedure for synthesis and influence of compositional variations. Masters thesis, King Fahd University of Petroleum and Minerals.

(1994) Characterization of the acidic properties of zeolites and their catalytic behavior in the synthesis of MTBE. Masters thesis, King Fahd University of Petroleum and Minerals.

(1998) Synthesis and solution properties of polymeric zwitterionic ammonium betains. Masters thesis, King Fahd University of Petroleum and Minerals.

(2001) Study of the photochemical properties of some aromatic compounds on molecular sieves using a picosecond pulse laser system. PhD thesis, King Fahd University of Petroleum and Minerals.

(1992) Flow injection spectrophotometric assay of tetracyclines in drug formulations. Masters thesis, King Fahd University of Petroleum and Minerals.

(1993) Chemical aspects of thermal instability in jet fuels from Saudi Arabian crude oils. Masters thesis, King Fahd University of Petroleum and Minerals.

(1996) Liquid-liquid extraction of some rare earth metal ions by polyoxyalkylene systems. Masters thesis, King Fahd University of Petroleum and Minerals.

(1990) Cyanoketene cycloaddition reactions. Masters thesis, King Fahd University of Petroleum and Minerals.

(2000) High performance liquid chromatographic separation of some psychotherapeutic benzodiazepines with chemometrical optimization. Masters thesis, King Fahd University of Petroleum and Minerals.

(1992) Cycloaddition reactions of a heterocyclic nitrone. Masters thesis, King Fahd University of Petroleum and Minerals.

(1993) Electron spini resonance studies of solute-solvent interaction in liquid-crystalline solvents. PhD thesis, King Fahd University of Petroleum and Minerals.

(1999) Characterization of molecular sieves by n-Hexane cracking. Masters thesis, King Fahd University of Petroleum and Minerals.

(2003) Synthesis and solution properties of some polysulfobetaines. Masters thesis, King Fahd University of Petroleum and Minerals.

(1993) Voltammetric assays and behavior of norfloxacin and nalidixic acid antibacterial drugs. Masters thesis, King Fahd University of Petroleum and Minerals.

(2000) Differential electrolytic potentiometric detector in flow injection analysis. Masters thesis, King Fahd University of Petroleum and Minerals.

(2000) A Geochemical investigation of a suite of Central Arabian crude oils. Masters thesis, King Fahd University of Petroleum and Minerals.

(1999) Differential electrolytic potentiometric detector in flow injection analysis and in micro titration. Masters thesis, King Fahd University of Petroleum and Minerals.

(2000) Study of the Stereochemical and reactivity phenomena of the addition reaction of 8-membered cyclic nitrone by NMR spectroscopy. Masters thesis, King Fahd University of Petroleum and Minerals.

(1997) EPR investigations of anisotropic interaction and cole-davidson parameters, novel phospholipids, and newly synthesized buckminsterfullerenes using nitroxide spin probes. PhD thesis, King Fahd University of Petroleum and Minerals.

(1993) Chronoamperometric evaluation of several organic corrosion inhibitors by the measurement of the hydrogen permeation flux. Masters thesis, King Fahd University of Petroleum and Minerals.

(1996) NMR study of nitrogen inversion and N-O bond rotation and anomeric effect in hydroxylamine derivatives. PhD thesis, King Fahd University of Petroleum and Minerals.

(1990) Nickel and vanadyl porphyrins in Arabian heavy crude oil. Masters thesis, King Fahd University of Petroleum and Minerals.

(1985) Synthesis, spectroscopic studies and structure of gold (III) chloride compounds of heterocyclic N-oxide diadducts revealing short hydrogen bond. Masters thesis, King Fahd University of Petroleum and Minerals.

(1997) Quantitative determination of tetraalkyllead by lead-207 nuclear magnetic resonance. Masters thesis, King Fahd University of Petroleum and Minerals.

(1993) ¹⁵N and ¹³C NMR studies of the interaction of cyanide ion with gold (I) drugs. Masters thesis, King Fahd University of Petroleum and Minerals.

(2003) Investigation of structural stability and vibrational spectra of some organizations. Masters thesis, King Fahd University of Petroleum and Minerals.

(1996) Kinetic studies and methods of analysis of some compounds of analytical interest utilizing sequential injection analysis technique. Masters thesis, King Fahd University of Petroleum and Minerals.

(1997) Zincosilicates with MFI-structure; synthesis, characterization, and catalytic evaluation. Masters thesis, King Fahd University of Petroleum and Minerals.

(1993) A Study of translational diffusion constants of paramagnetic species in solution. Masters thesis, King Fahd University of Petroleum and Minerals.

(2006) Growth of uniform layers of nanosized zeolites on 3D ordered macroporous carbon: synthesis, characterization, and catalytic evaluation. Masters thesis, King Fahd University of Petroleum and Minerals.

(1997) The Role of asphaltenes, resins and other solids in the stabilization of water in oil emulsions and its effect on oil production in Saudi oil fields. Masters thesis, King Fahd University of Petroleum and Minerals.

(1998) Synthesis, solution properties and NMR spectroscopy of some polybetaines. Masters thesis, King Fahd University of Petroleum and Minerals.

(1987) Investigation of nitrogen compound types in high-boiling petroleum distillates form Saudi Arabian crude oils. Masters thesis, King Fahd University of Petroleum and Minerals.

(2000) Cyclopolymerization of unsaturated quaternary piperazinium compounds. Masters thesis, King Fahd University of Petroleum and Minerals.

(2003) Chain transfer agents: characterization and their use in polymerization reactions. PhD thesis, King Fahd University of Petroleum and Minerals.

(1995) Synthesis, modification and catalytic evaluation of high-silica zeolites. PhD thesis, King Fahd University of Petroleum and Minerals.

(1996) 13C, 15N and 31P NMR study of the scrambling and the redox reactions of some gold(I) complexes. PhD thesis, King Fahd University of Petroleum and Minerals.

(2000) Synthesis and application of acrylamide based multi-block copolymers in separation of proteins. Masters thesis, King Fahd University of Petroleum and Minerals.

(2003) Laser induced photocatalytic conversion of methane into methanol. PhD thesis, King Fahd University of Petroleum and Minerals.

(2002) Synthesis, characterization and NMR studies of some gold(I) and silver(I) complexes with cyanide, thiones and selenones. PhD thesis, King Fahd University of Petroleum and Minerals.

(1999) Catalytic chain transfer polymerization of methacrylates and styrene. Masters thesis, King Fahd University of Petroleum and Minerals.

(1989) Photoinitiated polymerization by phosphonium salts incorporating a chromophore unit. Masters thesis, King Fahd University of Petroleum and Minerals.

(2005) Synthesis of 2-imino-2-oxo-1,3,2-oxazaphosphorinanes. Masters thesis, King Fahd University of Petroleum and Minerals.

(1998) Design and construction of a liquid incinerator; a novel method for fast chemical measurements and feedback control. PhD thesis, King Fahd University of Petroleum and Minerals.

(2000) Protective effects of substituted 1 (Benzyl) 1-H- 1,2,3 triazole compounds on the dissolution of iron in HCI solution. Masters thesis, King Fahd University of Petroleum and Minerals.

(1996) The effect of pH and solvent on the photophysics of thymine. Masters thesis, King Fahd University of Petroleum and Minerals.

(1998) Arabian Asphalts – Chemistry and Rheology. In: National Meeting of American Chemical Society, Division of Fuel Chemistry,.

(1999) Chemical Composition and Performance Related Properties of Polymer Modified Arab Asphalts. In: National Meeting of American Chemical Society, Division of Petroleum Chemistry.

(2002) The Effect of Age Hardening on the Structure of Asphaltenes Derived from Arabian Asphalts. In: American Institute of Chemical Engineers (AICHE), Spring National Meeting, March10-14, New Orleans, LA.

(1997) Characterization of the Structure of Saudi Crude Asphaltenes by X-ray Diffraction. Energy & Fuels, 11. p. 561.

(1999) Investigation of Chemical Transformations by NMR and GPC During the Laboratory Aging of Arabian asphalts. Fuel, 78 (12). p. 1407.

(2000) Regiochemistry and Mechanism of Oxidation of N-Benzyl-N-alkylhydroxylamines to Nitrones. J. Phys. Org. Chem., 13. p. 443.

(2001) Changes in Asphalt Chemistry and Durability During Oxidation and Polymer Modification. Petroleum Science & Technology, 19 (9-10). p. 1229.

(2002) Use of X-Ray Technique in Assessing the Aging Pattern of Asphalt Fractions. Fuel, 81 (1). p. 51.

(2003) Alkylation and Oxidation Reactions of Arabian Asphaltenes. Fuel, 82 (11). p. 1323.

(2003) Infrared Study of Hydrogen Bond Types in Asphaltenes. Petroleum Science and Technology, 21 (9-10). p. 1601.

(2004) Structural Studies on Residual Fuel Oil Asphaltenes by RICO Method. Petroleum Science andTechnology, 22 (5-6). p. 655.

(2005) Thermal and Catalytic Decomposition of Behavior of PVC Mixed Plastic Waste with Petroleum Residue. Journal of Applied and Analytical Pyrolysis, 74 (1-2). p. 282.

(2007) Identification of Different Kinds of Plastics Using Laser Induced Breakdown Spectroscopy for Waste Management. Journal of Environmental Science and Health Part A, 42 (13). pp. 1989-1997.

(2006) The Conversion of Waste Plastics/Petroleum Resid Mixtures to Transportation Fuels. In: Feedstock Recycling and Pyrolysis of Waste Plastics: Converting Waste Plastics into Diesel and Other Fuels. John Wiley & Sons, Ltd, UK, pp. 363-383. ISBN 978-0470-02152-1

(1988) Effects of Solvent and Humic Materials in Fluorimeteric Determination of Oil Hydrocarbons in Marine Sediments. International Journal of Environmental Analytical Chemists, 33 (2). p. 123.

(1991) Thermolysis of 7-Isopropylidene-2,3-Diazabicyclo (2.2.1) Hept-2-ene in the Presence of Spin Trap. Tetrahedron Letters, 32 (30). p. 3711.

(1996) Regiochemistry of Mercury (II) Oxide Oxidation of Unsymmetrical N,N-Disubstituted Hydroxylamines. Tetrahedron, 52. p. 14917.

(1985) A Novel Synthetic Route to Heterocyclic Quinones. J. Org. Chemistry, 50. p. 3427.

(2003) Reactions of 2- Amino-1,4- Naphthoquinone with Aldehydes. AJSE, 28. pp. 51-60.

(1988) NMR Used For Saudi Crude Asphaltene. Oil and Gas Journal. pp. 38-40.

(1988) Separation and Characterization of Asphaltenes From Saudi Arabian Crudes. Fuel, 67 (8). p. 1131.

(1988) Chromatographic Separation and Characterization of Asphaltenes Sub-fractions from Saudi Arabian Crudes. Fuel, 67 (9). p. 1307.

(1989) Base catalyzed rearrangement of azidoquinones- substituted active methylene compounds. Proceedings of the 3ed National Meeting of Chemists, 12-14 March, (1989). KFUPM , Dhahran, Saudi Arabia..

(1994) An Alternative Synthetic Approach to N- Protected - Amino aldehyde”. AJSE, 19. p. 661.

(1993) A Study of Translational Diffusion Constants of Paramagnetic Species In Solution. Masters thesis, KING FAHD UNIVERSITY OF PETROLEUM & MINERALS.

(1993) 15N and 13C NMR Studies of the Interaction of Cyanide Ion With Gold(I) Drugs. Masters thesis, KING FAHD UNIVERSITY OF PETROLEUM & MINERALS.

(1992) Flow Injection Spectrophotometric Assay of Tetracyclines in Drug Formulations. Masters thesis, KING FAHD UNIVERSITY OF PETROLEUM & MINERALS.

(1991) Chemical Analysis of Some Penicillin And Cephalosporin Drugs. Masters thesis, KING FAHD UNIVERSITY OF PETROLEUM & MINERALS.

(1992) Cycloaddition Reactions of A Heterocyclic Nitrone. Masters thesis, KING FAHD UNIVERSITY OF PETROLEUM & MINERALS.

(1992) EPR Study of Vanadyl Complexes with Schiff Bases Derived from S-Methyl- Carbodithioato-Hydrazine. Masters thesis, KING FAHD UNIVERSITY OF PETROLEUM & MINERALS.

(1993) Chemical Aspects of Thermal Instability in Jet Fuels From Saudi-Arabian Crude Oils. Masters thesis, KING FAHD UNIVERSITY OF PETROLEUM & MINERALS.

REMOTE MEASUREMENT OF FLOW RATES OF POLLUTED WATER WITH DOPPLER VELOCIMETRY. The 6th Saudi Engineering Conference, KFUPM, Dhahran, December 2002.

EFFECT OF CHLORIDE CONCENTRATION IN SOIL ON REINFORCEMENT CORROSION. ARABIAN JOURNAL FOR SCIENCE AND ENGINEERING, 31 (1C): 107-122 JUN 2006.

Civil and Environmental Engineering

Large deformation analysis of plates on unilateral elastic foundation. Large deformation analysis of plates on unilateral elastic foundation.

Nonaxisymmetric unbonded contact of plates on tensionless Winkler foundations. Nonaxisymmetric unbonded contact of plates on tensionless Winkler foundations.

ANALYSIS OF LARGE OPENINGS IN CYLINDRICAL VESSELS INCLUDING NOZZLE FLEXIBILITY. ANALYSIS OF LARGE OPENINGS IN CYLINDRICAL VESSELS INCLUDING NOZZLE FLEXIBILITY..

Stability of vertically bent pipelines buried in sand. Stability of vertically bent pipelines buried in sand.

Finite element formulation of a third order laminated finite rotation shell element. Finite element formulation of a third order laminated finite rotation shell element.

Analysis and design of pipeline stiffened-anchor plate/flange. Analysis and design of pipeline stiffened-anchor plate/flange.

concrete plasticity model with elliptic failure surface and independent hardening/softening. concrete plasticity model with elliptic failure surface and independent hardening/softening.

Mixed hardening, three-invariants dependent cap model. Mixed hardening, three-invariants dependent cap model.

Layered nonhomogeneous curved beam elements for inelastic analysis. Layered nonhomogeneous curved beam elements for inelastic analysis.

Performance of plain and blended cements exposed to high sulphate concentrations. Performance of plain and blended cements exposed to high sulphate concentrations.

Sulfate resistance of plain and blended cements exposed to magnesium sulfate solutions. Sulfate resistance of plain and blended cements exposed to magnesium sulfate solutions.

29Si MAS-NMR study of hydrated cement paste and mortar with varying content of fly ash. 29Si MAS-NMR study of hydrated cement paste and mortar with varying content of fly ash.

Effect of inhibitor treatment on corrosion of steel in a salt solution. Effect of inhibitor treatment on corrosion of steel in a salt solution.

Mechanical properties and durability characteristics of polymer- and cement-based repair materials. Mechanical properties and durability characteristics of polymer- and cement-based repair materials.

Sulfate resistance of plain and blended cements exposed to varying concentrations of sodium sulfate. Sulfate resistance of plain and blended cements exposed to varying concentrations of sodium sulfate.

Effect of waterproofing coatings on steel reinforcement corrosion and physical properties of concrete. Effect of waterproofing coatings on steel reinforcement corrosion and physical properties of concrete.

Effect of rebar cleanliness and repair materials on reinforcement corrosion and flexural strength of repaired concrete beams. Effect of rebar cleanliness and repair materials on reinforcement corrosion and flexural strength of repaired concrete beams.

Effect of environmental pre-conditioning on bond of FRP reinforcement to concrete. Effect of environmental pre-conditioning on bond of FRP reinforcement to concrete.

Evaluation of bond using FRP rods with axisymmetric deformations. Evaluation of bond using FRP rods with axisymmetric deformations.

Effect of Cyclic Loading on Bond Behavior of GFRP Rods Embedded in Concrete Beams. Effect of Cyclic Loading on Bond Behavior of GFRP Rods Embedded in Concrete Beams.

29Si MAS-NMR study of hydrated cement paste and mortar made with and without silica fume. 29Si MAS-NMR study of hydrated cement paste and mortar made with and without silica fume.

29Si magic-angle-spinning nuclear magnetic resonance study of hydrated cement paste and mortar. 29Si magic-angle-spinning nuclear magnetic resonance study of hydrated cement paste and mortar.

Contractor financing, public works in Saudi Arabia. Contractor financing, public works in Saudi Arabia.

29Si MAS-NMR hydration and compressive strength study in cement paste. 29Si MAS-NMR hydration and compressive strength study in cement paste.

Effect of steel manufacturing process and atmospheric corrosion on the corrosion-resistance of steel bars in concrete. Effect of steel manufacturing process and atmospheric corrosion on the corrosion-resistance of steel bars in concrete.

HLXVIB - A computer code for free vibration analysis of circular helicoidal bars. HLXVIB - A computer code for free vibration analysis of circular helicoidal bars.

Computer algorithm for the static analysis of circular helicoidal bars. Computer algorithm for the static analysis of circular helicoidal bars.

Loss of punching capacity of bridge deck slabs from crack damage. Loss of punching capacity of bridge deck slabs from crack damage.

Assessment of damage to concrete girder-slab bridges in Saudi Arabia. Assessment of damage to concrete girder-slab bridges in Saudi Arabia.

Categorization of damage to concrete bridge decks in Saudi Arabia. Categorization of damage to concrete bridge decks in Saudi Arabia.

Performance of epoxy-repaired concrete under thermal cycling. Performance of epoxy-repaired concrete under thermal cycling.

Third order shear deformation model for laminated shells with finite rotations: Formulation and consistent linearization. Third order shear deformation model for laminated shells with finite rotations: Formulation and consistent linearization.

Effect of silica fume on the mechanical properties of low quality coarse aggregate concrete. Effect of silica fume on the mechanical properties of low quality coarse aggregate concrete.

Effectiveness of corrosion inhibitors in contaminated concrete. Effectiveness of corrosion inhibitors in contaminated concrete.

Effectiveness of surface coatings in improving concrete durability. Effectiveness of surface coatings in improving concrete durability.

Effect of coarse aggregate quality on the mechanical properties of high strength concrete. Effect of coarse aggregate quality on the mechanical properties of high strength concrete.

Performance of concrete coatings under varying exposure conditions. Performance of concrete coatings under varying exposure conditions.

Effect of degree of corrosion on the properties of reinforcing steel bars. Effect of degree of corrosion on the properties of reinforcing steel bars.

Dynamics of flexible-link and flexible-joint manipulator carrying a payload with rotary inertia. Dynamics of flexible-link and flexible-joint manipulator carrying a payload with rotary inertia.

Effect of mix proportions on plastic shrinkage cracking of concrete in hot environments. Effect of mix proportions on plastic shrinkage cracking of concrete in hot environments.

Plastic shrinkage cracking of concrete in hot-arid environments. Plastic shrinkage cracking of concrete in hot-arid environments.

Evaluation of repair materials for functional improvement of slabs and beams with corroded reinforcement. Evaluation of repair materials for functional improvement of slabs and beams with corroded reinforcement.

Effectiveness of concrete surface treatment materials in reducing chloride-induced reinforcement corrosion. Effectiveness of concrete surface treatment materials in reducing chloride-induced reinforcement corrosion.

Three-dimensional Mohr's circle for shear stress components. Three-dimensional Mohr's circle for shear stress components.

Three-dimensional graphical method for shear strain analysis. Three-dimensional graphical method for shear strain analysis.

Effectiveness of concrete surface treatment materials in reducing chloride-induced reinforcement corrosion. Effectiveness of concrete surface treatment materials in reducing chloride-induced reinforcement corrosion.

Effect of reinforcement corrosion on bond strength. Effect of reinforcement corrosion on bond strength.

Effect of reinforcement corrosion on flexural behavior of concrete slabs. Effect of reinforcement corrosion on flexural behavior of concrete slabs.

Dynamic response of circular cylinders in cross-flow. Dynamic response of circular cylinders in cross-flow.

Energy-momentum conserving algorithm for nonlinear dynamics of laminated shells based on a third-order shear deformation theory. Energy-momentum conserving algorithm for nonlinear dynamics of laminated shells based on a third-order shear deformation theory.

Remote sensing application to the management of agricultural drainage water in severely arid region: a case study. Remote sensing application to the management of agricultural drainage water in severely arid region: a case study.

Rate and mode of barchan dunes advance in the central part of the Jafurah Sand Sea. Rate and mode of barchan dunes advance in the central part of the Jafurah Sand Sea.

Weather modification impact on reference evapotranspiration, soil salinity and desertification in arid regions: a case study. Weather modification impact on reference evapotranspiration, soil salinity and desertification in arid regions: a case study.

Si MAS-NMR study of hydrated cement paste and mortar with varying content of fly ash. Si MAS-NMR study of hydrated cement paste and mortar with varying content of fly ash.

STRESS DISTRIBUTION IN DEEP BEAMS WITH WEB OPENINGS. STRESS DISTRIBUTION IN DEEP BEAMS WITH WEB OPENINGS..

Development of calcium silicate thermal insulator in Saudi Arabia. Development of calcium silicate thermal insulator in Saudi Arabia.

Evaluation of corrosion resistance of reinforcing steel in sulfur concrete. Evaluation of corrosion resistance of reinforcing steel in sulfur concrete.

Effect of hot weather on strength of reinforced concrete beams. Effect of hot weather on strength of reinforced concrete beams.

Permeability and durability of plain and blended cement concretes cured in field and laboratory conditions. Permeability and durability of plain and blended cement concretes cured in field and laboratory conditions.

EFFECT OF HOT CLIMATE ON SHEAR STRENGTH OF CONCRETE. EFFECT OF HOT CLIMATE ON SHEAR STRENGTH OF CONCRETE.

Effect of sulfate ions on the corrosion of rebars embedded in concrete. Effect of sulfate ions on the corrosion of rebars embedded in concrete.

EFFECT OF FILLER TYPE ON THE DURABILITY OF SULFUR-SAND COMPOSITES IN THE ARABIAN GULF COUNTRIES. EFFECT OF FILLER TYPE ON THE DURABILITY OF SULFUR-SAND COMPOSITES IN THE ARABIAN GULF COUNTRIES..

CORROSION OF STEEL REINFORCEMENT IN SULFUR CONCRETE. CORROSION OF STEEL REINFORCEMENT IN SULFUR CONCRETE.

Si magic-angle-spinning nuclear magnetic resonance study of hydrated cement paste and mortar. Si magic-angle-spinning nuclear magnetic resonance study of hydrated cement paste and mortar.

Si MAS-NMR study of hydrated cement paste and mortar made with and without silica fume. Si MAS-NMR study of hydrated cement paste and mortar made with and without silica fume.

Use of polypropylene fibers to enhance deterioration resistance of concrete surface skin subjected to cyclic wet/dry sea water exposure. Use of polypropylene fibers to enhance deterioration resistance of concrete surface skin subjected to cyclic wet/dry sea water exposure.

Effect of sulfate and carbonate ions on reinforcing steel corrosion as evaluated using AC impedance spectroscopy. Effect of sulfate and carbonate ions on reinforcing steel corrosion as evaluated using AC impedance spectroscopy.

Corrosion behavior of pre-rusted rebars after placement in concrete. Corrosion behavior of pre-rusted rebars after placement in concrete.

Corrosion of steel reinforcement in polypropylene fiber reinforced concrete structures. Corrosion of steel reinforcement in polypropylene fiber reinforced concrete structures.

CORROSION RATE MEASUREMENTS OF REINFORCING STEEL IN CONCRETE BY ELECTROCHEMICAL TECHNIQUES. CORROSION RATE MEASUREMENTS OF REINFORCING STEEL IN CONCRETE BY ELECTROCHEMICAL TECHNIQUES..

Effect of thermal cycling on the durability of concrete made from local materials in the Arabian Gulf countries. Effect of thermal cycling on the durability of concrete made from local materials in the Arabian Gulf countries.

Si MAS-NMR hydration and compressive strength study in cement paste. Si MAS-NMR hydration and compressive strength study in cement paste.

LABORATORY STUDY ON THE EFFECT OF SULFATE IONS ON REBAR CORROSION. LABORATORY STUDY ON THE EFFECT OF SULFATE IONS ON REBAR CORROSION..

EVALUATION OF DEGREE OF HYDRATION IN CONCRETE USING **2**9Si MAGIC ANGLE SPINNING NMR IN SOLIDS. EVALUATION OF DEGREE OF HYDRATION IN CONCRETE USING **2**9Si MAGIC ANGLE SPINNING NMR IN SOLIDS..

EFFECT OF POLYPROPYLENE FIBER REINFORCEMENT ON THE PROPERTIES OF FRESH AND HARDENED CONCRETE IN THE ARABIAN GULF ENVIRONMENT. EFFECT OF POLYPROPYLENE FIBER REINFORCEMENT ON THE PROPERTIES OF FRESH AND HARDENED CONCRETE IN THE ARABIAN GULF ENVIRONMENT..

EFFECT OF HOT WEATHER ON MODULUS OF RUPTURE AND SPLITTING TENSILE STRENGTH OF CONCRETE. EFFECT OF HOT WEATHER ON MODULUS OF RUPTURE AND SPLITTING TENSILE STRENGTH OF CONCRETE..

Viscous flow over a sphere with fluctuations in the free-stream velocity. Viscous flow over a sphere with fluctuations in the free-stream velocity.

Effect of groundwater velocity on pilot scale bioremediation of gasoline contaminated sandy aquifers. Effect of groundwater velocity on pilot scale bioremediation of gasoline contaminated sandy aquifers.

Tidal effects on transport of contaminants in a coastal shallow aquifer. Tidal effects on transport of contaminants in a coastal shallow aquifer.

Modeling transport and biodegradation of BTX compounds in saturated sandy soil. Modeling transport and biodegradation of BTX compounds in saturated sandy soil.

Estimating flood quantiles in southwestern part of Saudi Arabia. Estimating flood quantiles in southwestern part of Saudi Arabia.

State-of-the-art review of bioremediation studies. State-of-the-art review of bioremediation studies.

Experimental study and numerical simulation of denitrification in saturated porous media. Experimental study and numerical simulation of denitrification in saturated porous media.

Solution of the transport equation by the collocation method in conjunction with the adaptive hermite element family. Solution of the transport equation by the collocation method in conjunction with the adaptive hermite element family.

A simple arrangement and procedure for in-situ measurement of corrosion rate of rebar embedded in concrete. A simple arrangement and procedure for in-situ measurement of corrosion rate of rebar embedded in concrete.

Assessment of service lives of R.C. structures subjected to chloride-induced rebar corrosion. Assessment of service lives of R.C. structures subjected to chloride-induced rebar corrosion.

Experimental service life prediction of rebar corroded R.C. structure. Experimental service life prediction of rebar corroded R.C. structure.

Design procedures for cathodic protection systems for R.C.C. members. Design procedures for cathodic protection systems for R.C.C. members.

Empirical modelling of indicators of chloride-induced rebar corrosion. Empirical modelling of indicators of chloride-induced rebar corrosion.

Reinforcement corrosion in concrete structures, its monitoring and service life prediction - A review. Reinforcement corrosion in concrete structures, its monitoring and service life prediction - A review.

Chloride penetration into silica fume concrete subject to different exposures. Chloride penetration into silica fume concrete subject to different exposures.

Residual strength of corrosion-damaged reinforced concrete beams. Residual strength of corrosion-damaged reinforced concrete beams.

Optimum concrete mixture design using locally available ingredients. Optimum concrete mixture design using locally available ingredients.

Compliance criteria for quality concrete. Compliance criteria for quality concrete.

Correlations between depth of water penetration, chloride permeability, and coefficient of chloride diffusion in plain, silica fume, and fly ash cement concretes. Correlations between depth of water penetration, chloride permeability, and coefficient of chloride diffusion in plain, silica fume, and fly ash cement concretes.

A study of the relationship between permeability and tortuosity of concrete. A study of the relationship between permeability and tortuosity of concrete. (Submitted)

Correlation between strength and durability indices of plain and blended cement concretes. Correlation between strength and durability indices of plain and blended cement concretes. (Submitted)

A study of self-compacting concrete made with marginal aggregates. A study of self-compacting concrete made with marginal aggregates. (In Press)

Recent developments in sulfur concrete technology. In: Recent developments in sulfur concrete technology.

A damage-propagation model for chloride-induced corrosion of reinforced concrete beams. In: 8th International Conference on Concrete in Hot and Aggressive Environments, 27-29 November 2006, Bahrain.

Recent developments in sulfur concrete technology. In: 7th International Conference and Exhibition on Chemistry in Industry (CHEMINDIX 2007), 26-28 March 2007, Bahrain.

Strategy for monitoring and repairing of concrete bridges exposed to corrosive environments. In: 3rd Gulf Conference on Roads (TGCR06), 6-8 March 2006, Muscat.

A study of permeability and tortuosity of concrete. In: 30th Conference on Our World in Concrete & Structures (OW 05), 23-24 August 2005, Singapore.

Methodology for the assessment of corrosion damage in reinforced concrete structures. In: Eighth International Conference on Concrete Engineering & Technology (CONCET 2004), 19-21 April 2004, Kuala Lumpur, Malaysia.

Improving durability of R.C. members through optimum selection of the levels of corrosion cracking factors. In: 7th International Conference on Concrete in Hot and Aggressive Environments, 13-15 October 2003, Bahrain.

Reinforcement corrosion in the Arabian Gulf and its prevention– a review. In: 7th International Conference on Concrete in Hot and Aggressive Environments, 13-15 October 2003, Bahrain.

Wastewater management for electroplating industries. In: International Conference on Environmental Challenges for the New Millennium, 25th-27th Nov. 1999, New Delhi, India.

Effect of acidic waste water on mortar and concrete. In: International Symposium on Innovative World of Concrete-98, 16-19 November, 1998, Calcutta, India.

Influence of chloride content, cover, and concrete mix parameters on post depassivation service life of chloride contaminated R.C. structures. In: International Conference on Maintenance and Durability of Concrete Structures, 4-6 March, 1997, J.N.T. University, Hyderabad, India.

Rebar corrosion risk due to free chloride under tropical conditions. In: International Conference on New Challenges for Civil Engineers of Developing Countries in the 21st Century, 29 February, 1, 2 March, 1996, New Delhi, India.

Environmental problems due to fly ash and its use as building material. In: International Conference on New Challenges for Civil Engineers of Developing Countries in the 21st Century, 29 February, 1, 2 March, 1996, New Delhi, India.

Environmental risk assessment. In: International Conference on New Challenges for Civil Engineers of Developing Countries in the 21st Century, 29 February, 1, 2 March, 1996, New Delhi, India.

Diagnostic methods for rehabilitation of corrosion damaged R.C. structure. In: National Conference on Civil Engineering Materials and Structures, 19-21 January, 1995, Osmania University, Hyderabad, India.

A study of the size-effect of corroded reinforced concrete beams in prediction of residual strength. Project Report. KFUPM.

Formulating supplementary compliance criteria for locally produced concrete. Project Report. KFUPM.

A study of self-compacting concrete using local marginal aggregates. Project Report. KFUPM.

Study on PVC pipe products and causes of failures. Project Report. KFUPM.

Establishing quality compliance criteria for concrete in Eastern Saudi Arabia. Project Report. KFUPM.

A study of the relationship between permeability and tortuosity of concrete. Project Report. KFUPM.

Prediction of residual strength of corrosion-damaged reinforced concrete beams. Project Report. KFUPM.

Evaluation of sulfur concrete technology for local applications. Project Report. KFUPM.

Behaviour of patch repair of axially loaded reinforced concrete beams. Behaviour of patch repair of axially loaded reinforced concrete beams.

Evaluation of repair materials for functional improvement of slabs and beams with corroded reinforcement. In: Proceedings of the Institution of Civil Engineers: Structures and Buildings.

Use of surface treatment materials to improve concrete durability. Use of surface treatment materials to improve concrete durability.

Effect of cement composition on corrosion of reinforcing steel in concrete. In: From authors.

A repair strategy for corrosion damaged concrete. In: From authors.

Plastic shrinkage cracking of concrete in hot-arid environments. Plastic shrinkage cracking of concrete in hot-arid environments.

Effectiveness of concrete surface treatment materials in reducing chloride-induced reinforcement corrosion. Effectiveness of concrete surface treatment materials in reducing chloride-induced reinforcement corrosion.

Chloride threshold for corrosion of reinforcement in concrete. Chloride threshold for corrosion of reinforcement in concrete.

Effect of reinforcement corrosion on flexural behavior of concrete slabs. Effect of reinforcement corrosion on flexural behavior of concrete slabs.

Effect of reinforcement corrosion on bond strength. Effect of reinforcement corrosion on bond strength.

Factors affecting threshold chloride for reinforcement corrosion in concrete. Factors affecting threshold chloride for reinforcement corrosion in concrete.

A comparison between mixing and grouting approaches for treating calcareous expansive clay. In: Grouting and deep mixing. Proc. conference, Tokyo,.

Design optimization of continuous partially prestressed concrete beams. Design optimization of continuous partially prestressed concrete beams.

Treatment of calcareous expansive clays. In: Fly Ash for Soil Improvement,.

Evaluation study of modified Mohr-Coulomb and cap models. In: Proceedings of Engineering Mechanics.

Al-Gahtani, A.S., Al-Mussallam, A.A. Al-Gahtani, A.S., Al-Mussallam, A.A..

Rebar corrosion and sulfate resistance of blast-furnace slag cement. Rebar corrosion and sulfate resistance of blast-furnace slag cement.

Influence of sulfates on chloride binding in cements. Influence of sulfates on chloride binding in cements.

Corrosion of reinforcing steel in fly ash blended cement concrete. Corrosion of reinforcing steel in fly ash blended cement concrete.

Interaction of steel jacket platform with surrounding soil. In: CONF. ON OFFSHORE MECHANICS AND ARCTIC ENGINEERING.

Corrosion cracking in relation to bar diameter, cover, and concrete quality. Corrosion cracking in relation to bar diameter, cover, and concrete quality.

Reinforcement corrosion-resisting characteristics of silica-fume blended-cement concrete. Reinforcement corrosion-resisting characteristics of silica-fume blended-cement concrete.

Interaction Of Steel Jacket Platform With Surrounding Soil. In: Proceedings of the International Offshore Mechanics and Arctic Engineering Symposium.

Pore solution composition and reinforcement corrosion characteristics of microsilica blended cement concrete. Pore solution composition and reinforcement corrosion characteristics of microsilica blended cement concrete.

Effect of tricalcium aluminate content of cement on corrosion of reinforcing steel in concrete. Effect of tricalcium aluminate content of cement on corrosion of reinforcing steel in concrete.

Influence of cement composition on the corrosion of reinforcement and sulfate resistance of concrete. Influence of cement composition on the corrosion of reinforcement and sulfate resistance of concrete.

Effect of rusting of reinforcing steel on its mechanical properties and bond with concrete. Effect of rusting of reinforcing steel on its mechanical properties and bond with concrete.

Influence of construction practices on concrete durability. Influence of construction practices on concrete durability.

Engineering properties of the soil of Sana'a, the Yemen Arab Republic. Engineering properties of the soil of Sana'a, the Yemen Arab Republic.

Software For Optimum Design Of Highway Bridge Beams. Software For Optimum Design Of Highway Bridge Beams..

Deterioration Of Concrete Structures In The Environment Of The Middle East. Deterioration Of Concrete Structures In The Environment Of The Middle East..

Soil deformation and shear strength characteristics of the Sana'a soil, Yemen Arab Republic. Soil deformation and shear strength characteristics of the Sana'a soil, Yemen Arab Republic.

Characteristics and chemical treatment of expansive clay in Al- Qatif, Saudi Arabia. Characteristics and chemical treatment of expansive clay in Al- Qatif, Saudi Arabia.

Mixed hardening, three-invariants dependent cap model. Mixed hardening, three-invariants dependent cap model.

Expansive soil in Al-Madinah, Saudi Arabia. Expansive soil in Al-Madinah, Saudi Arabia.

Geotechnical behavior of oil-contaminated fine-grained soils. Geotechnical behavior of oil-contaminated fine-grained soils.

Stability of vertically bent pipelines buried in sand. Stability of vertically bent pipelines buried in sand.

Response of sabkha to laboratory tests: a case study. Response of sabkha to laboratory tests: a case study.

Determination of parameters for a hyperbolic model of soils. Determination of parameters for a hyperbolic model of soils.

Effects of confining pressure and temperature on mixed-mode (I-II) fracture toughness of a limestone rock. Effects of confining pressure and temperature on mixed-mode (I-II) fracture toughness of a limestone rock.

A generalized three invariants cap model and its numerical implementation to study soil-foundation interaction. A generalized three invariants cap model and its numerical implementation to study soil-foundation interaction.

Reuse of wastewater effluents in saudi arabia. In: Reuse of wastewater effluents in saudi arabia.

Inhibition of atmospheric corrosion of mild steel by sodium dihydrogen orthophosphate treatment. In: Inhibition of atmospheric corrosion of mild steel by sodium dihydrogen.

Bond evaluation of environmentally conditioned GFRP/concrete systems. In: Bond evaluation of environmentally conditioned GFRP/concrete systems.

Effects of Calcium Sulfate on Swelling Potential of an Expansive Clay. Effects of Calcium Sulfate on Swelling Potential of an Expansive Clay.

Determination of parameters for a hyperbolic model of soils. In: Determination of parameters for a hyperbolic model of soils.

Study on the performance of calcareous expansive clays. Study on the performance of calcareous expansive clays.

A generalized three invariants cap model and its numerical implementation to study soil-foundation interaction. In: A generalized three invariants cap model and its numerical implementation to study.

Influence of gypsification on engineering behavior of expansive clay. Influence of gypsification on engineering behavior of expansive clay.

Evaluation study of modified Mohr-Coulomb and cap models. In: Evaluation study of modified Mohr-Coulomb and cap models.

Expansive characteristics of gypsiferous/anhydritic soil formations. Expansive characteristics of gypsiferous/anhydritic soil formations.

Laboratory and field studies of response of structures to heave of expansive clay. Laboratory and field studies of response of structures to heave of expansive clay.

Compressibility and collapse characteristics of arid saline sabkha soils. Compressibility and collapse characteristics of arid saline sabkha soils.

Geotechnical behaviour of saline sabkha soils. Geotechnical behaviour of saline sabkha soils.

Strength characteristics of sabkha soils. Strength characteristics of sabkha soils.

Improvement of plasticity and swelling potential of calcareous expansive clays. Improvement of plasticity and swelling potential of calcareous expansive clays.

Influence of geotextiles on performance of saline sebkha soils. Influence of geotextiles on performance of saline sebkha soils.

Modified oedometer for arid, saline soils. Modified oedometer for arid, saline soils.

Swelling behaviour of calcareous clays from the Eastern Province of Saudi Arabia. Swelling behaviour of calcareous clays from the Eastern Province of Saudi Arabia.

Suggested modifications to ASTM standard methods when testing arid, saline soils. Suggested modifications to ASTM standard methods when testing arid, saline soils.

Influence of chloride ions on sulphate deterioration in plain and blended cements. Influence of chloride ions on sulphate deterioration in plain and blended cements.

Influence of sulfate ions on chloride-induced reinforcement corrosion in portland and blended cement concretes. Influence of sulfate ions on chloride-induced reinforcement corrosion in portland and blended cement concretes.

Magnesium-sodium sulfate attack in plain and blended cements. Magnesium-sodium sulfate attack in plain and blended cements.

Compressibility and swelling characteristics of Al-Khobar Palygorskite, eastern Saudi Arabia. Compressibility and swelling characteristics of Al-Khobar Palygorskite, eastern Saudi Arabia.

Effect of geotextile and cement on the performance of sabkha subgrade. Effect of geotextile and cement on the performance of sabkha subgrade.

Estimation of spilled hydrocarbon volume - The state-of-the-art. Estimation of spilled hydrocarbon volume - The state-of-the-art.

Analytical model to quantify crude oil spill volume in sandy layered aquifers. Analytical model to quantify crude oil spill volume in sandy layered aquifers.

Effectiveness of stone columns: Field assessment. Effectiveness of stone columns: Field assessment.

Nonwoven geotextile-sabkha and -sand interface friction characteristics using pull-out tests. Nonwoven geotextile-sabkha and -sand interface friction characteristics using pull-out tests.

Optimization of steel slag aggregates for bituminous mixes in Saudi Arabia. Optimization of steel slag aggregates for bituminous mixes in Saudi Arabia.

Utilization of local material in the construction of an embankment for recharging groundwater aquifer with treated wastewater effluents. Utilization of local material in the construction of an embankment for recharging groundwater aquifer with treated wastewater effluents.

The effect of temperature on the engineering properties of oil-contaminated sands. The effect of temperature on the engineering properties of oil-contaminated sands.

Performance of a stabilized marl base: A case study. Performance of a stabilized marl base: A case study.

Centrifugal modeling of bearing capacity of shallow foundations on sands. Centrifugal modeling of bearing capacity of shallow foundations on sands.

Strength and compressibility of Abqaiq marl, Saudi Arabia. Strength and compressibility of Abqaiq marl, Saudi Arabia.

A study of sand stabilization in eastern Saudi Arabia. A study of sand stabilization in eastern Saudi Arabia.

Evaluation of the flow pump and constant head techniques for permeability measurements. Evaluation of the flow pump and constant head techniques for permeability measurements.

Utilization of steel slag aggregate for road bases. Utilization of steel slag aggregate for road bases.

(2000) Effect of La3+ substitution for Sr2+ on thephase formation, structure and properties of (Tl0.5Pb0.5)Sr2Ca2Cu3Oy compounds. Applied Superconductivity, IEEE Transactions on, 10.

(2003) Analysis of multi-layer ARROW. Electronics, Circuits and Systems, 2003. ICECS 2003. Proceedings of the 2003 10th IEEE International conference, 3.

(2002) Spatial domain modeling of microcellular systems operating in multipath Nakagami channels. Personal, Indoor and Mobile Radio Communications, 2002. The 13th IEEE International Symposium on, 4.

(2006) A CMOS bandpass filter for low-IF bluetooth receivers. Circuits and Systems I: Regular Papers, IEEE Transactions on [Circuits and Systems I: Fundamental Theory and Applications, IEEE Transactions on], 53.

(2000) Transport, magnetic and structural properties of(Tl0.5Pb0.5)Sr2-xCexCa2Cu3Oy compounds. Applied Superconductivity, IEEE Transactions on, 10.

(2005) Calibration of VISSIM to the traffic conditions of Khobar and Dammam, Saudi Arabia. Masters thesis, King Fahd University of Petroleum and Minerals.

(2004) Studies on soil-foundation interaction in the Sabkha environment of Eastern Saudi Arabia. Masters thesis, King Fahd University of Petroleum and Minerals.

(2005) A prediction model for the residual flexural strength of corroded reinforced concrete beams. Masters thesis, King Fahd University of Petroleum and Minerals.

(2005) Effect of rate of water table rise on LNAPL entrapment in uniform and well-graded sands. Masters thesis, King Fahd University of Petroleum and Minerals.

(2004) Combined electrooxidation and electrocoagulation processes for the treatment of municipal wastewater. Masters thesis, King Fahd University of Petroleum and Minerals.

(2005) Improving the performance of damaged FBECR in chloride-contaminated concrete. Masters thesis, King Fahd University of Petroleum and Minerals.

(2004) Treatment of refinery wastewater using crossflow membrane bioreactor (CF-MBR). Masters thesis, King Fahd University of Petroleum and Minerals.

(2005) Assessment of the relationship between the spilled LNAPL volume and its thickness in monitoring wells considering the water table fluctuation history. PhD thesis, King Fahd University of Petroleum and Minerals.

(1993) Non-linear finite element analysis of reinforced concrete beams repaired by plate bonding. PhD thesis, King Fahd University of Petroleum and Minerals.

(1989) Status of hydrological network in south-western region of the Kingdom of Saudi Arabia. Masters thesis, King Fahd University of Petroleum and Minerals.

(2003) Influence of temperature and wind on moisture transport in cementitious materials. Masters thesis, King Fahd University of Petroleum and Minerals.

(1990) Performance of slow sand filters in treating secondary effluent using different sizes of local sand. Masters thesis, King Fahd University of Petroleum and Minerals.

(1996) Plastic shrinkage cracking in hot weather conditions. Masters thesis, King Fahd University of Petroleum and Minerals.

(1992) Nonlinear behavior of cylinder-plate junction on tensionless elastic subgrade. Masters thesis, King Fahd University of Petroleum and Minerals.

(2002) Treatment of water contaminated with dimethyl phthalate by Fenton, Photo-Fenton and UV/H₂O₂ processes. PhD thesis, King Fahd University of Petroleum and Minerals.

(1995) Canonical elastoplastic - damage modelling of reinforced concrete. PhD thesis, King Fahd University of Petroleum and Minerals.

(2003) Risk and hydraulic reliability analysis of water distribution systems. Masters thesis, King Fahd University of Petroleum and Minerals.

(1994) The effects of mode perceptions on intercity mode-choice behavior in Saudi Arabia. PhD thesis, King Fahd University of Petroleum and Minerals.

(1997) Relationship between the noncompliance behavior at signalized intersection an driver characteristics. Masters thesis, King Fahd University of Petroleum and Minerals.

(2000) The Interaction between soil and buried bent pipelines. Masters thesis, King Fahd University of Petroleum and Minerals.

(2000) Effects of geotextiles on the load-carrying capacity of pavements on Sabkha. Masters thesis, King Fahd University of Petroleum and Minerals.

(1993) Evaluation of Dammam carrousel treatment plant for nitrogen removal. Masters thesis, King Fahd University of Petroleum and Minerals.

(1995) Impact of process variables on nutrient removal in slow sand filters. Masters thesis, King Fahd University of Petroleum and Minerals.

(1998) Multiobjective water resources planning under demand, supply and quality uncertainties. Masters thesis, King Fahd University of Petroleum and Minerals.

(1997) Performance evaluation of slow sand filters: a probabilistic approach. Masters thesis, King Fahd University of Petroleum and Minerals.

(1997) Modeling of pavement condition and maintenance priority ranking for road networks. PhD thesis, King Fahd University of Petroleum and Minerals.

(1994) Numerical simulation of groundwater depletion in Al-Hasa area. Masters thesis, King Fahd University of Petroleum and Minerals.

(1997) A Study on the development of vehicular loding for design of highway bridges in Saudi Arabia. Masters thesis, King Fahd University of Petroleum and Minerals.

(1994) The effect of signal coordination on interesection safety. PhD thesis, King Fahd University of Petroleum and Minerals.

(1997) Optimization of parabolic steel box arches. Masters thesis, King Fahd University of Petroleum and Minerals.

(1989) A generalized theory for bending of thick isotropic rectangular plates. PhD thesis, King Fahd University of Petroleum and Minerals.

(1995) Elasto-plastic collapse load analysis of single mitred bends. Masters thesis, King Fahd University of Petroleum and Minerals.

(2001) Effect of gradation and testing procedures on the load carrying capacity of calcareous sediments. Masters thesis, King Fahd University of Petroleum and Minerals.

(1995) A groundwater velocity and dissolved oxygen on bioremediation of gasoline-contaminated sandy aquifers. PhD thesis, King Fahd University of Petroleum and Minerals.

(1989) Characterization and treatment of a petrochemical wastewater for reuse. Masters thesis, King Fahd University of Petroleum and Minerals.

(1995) Use of small diameter cores in evaluation of in-situ concrete strength in Eastern Saudi Arabia. Masters thesis, King Fahd University of Petroleum and Minerals.

(2000) Behavior of laterally loaded pile group model in sand. Masters thesis, King Fahd University of Petroleum and Minerals.

(1998) Quality changes of secondary effluent as it passes through amended sand column. Masters thesis, King Fahd University of Petroleum and Minerals.

(1994) Chloride diffusion in concrete/prediction of the onset of corrosion in reinforced concrete structures. Masters thesis, King Fahd University of Petroleum and Minerals.

(2002) Performance modification of Saudi-asphalt binders using SABIC polymers. Masters thesis, King Fahd University of Petroleum and Minerals.

(1991) Reliability studies of multireservoir system using stochastic approach. Masters thesis, King Fahd University of Petroleum and Minerals.

(1996) Protection of reinforced concrete using corrosion inhibitors and coatings. Masters thesis, King Fahd University of Petroleum and Minerals.

(1989) Pedestrian behavior related to accident involvement. Masters thesis, King Fahd University of Petroleum and Minerals.

(1997) Fate of secondary effluent flow through porous media. Masters thesis, King Fahd University of Petroleum and Minerals.

(1998) Performance optimization and modeling of slurry seal and micro surfacing utilizing steel slag aggregates. Masters thesis, King Fahd University of Petroleum and Minerals.

(1994) Three dimensional finite element analysis of brittle materials using CDM model. Masters thesis, King Fahd University of Petroleum and Minerals.

(1991) Treatise on solute transport in porous media and its modeling for centration-dependent permeability. PhD thesis, King Fahd University of Petroleum and Minerals.

(1995) Removal of coliphage and bacteria through slow sand filtration. Masters thesis, King Fahd University of Petroleum and Minerals.

(1996) Proposed methodology for designing the signal change interval. Masters thesis, King Fahd University of Petroleum and Minerals.

(1995) Boundary element analysis of nonprismatic beams and plates. Masters thesis, King Fahd University of Petroleum and Minerals.

(1993) The effect of temperature and salt contamination on corrosion of reinforcing steel in OPC and blended cement concretes. Masters thesis, King Fahd University of Petroleum and Minerals.

(1989) Performance of Epoxy-injected concrete in hot weather conditions. Masters thesis, King Fahd University of Petroleum and Minerals.

(2000) Performance evaluation of concrete coatings. Masters thesis, King Fahd University of Petroleum and Minerals.

(1997) Predicting short-duration, high-intensity rainfall in Saudi Arabia. Masters thesis, King Fahd University of Petroleum and Minerals.

(1998) Fracture toughness investigation of an indigenous limestone rock formation. Masters thesis, King Fahd University of Petroleum and Minerals.

(1989) Load induced cracking and failure of concrete deck slabs in girder-slab type bridges. Masters thesis, King Fahd University of Petroleum and Minerals.

(2003) Study of reaction kinetics of a submerged membrane activated sludge process. PhD thesis, King Fahd University of Petroleum and Minerals.

(1997) Validation and improvement of rear-end traffic conflict model for safety evaluation of coordinated signal systems. Masters thesis, King Fahd University of Petroleum and Minerals.

(1997) Removal of microorganisms through slow sand filtration of chlorinated vs. nonchlorinated secondary effluents. Masters thesis, King Fahd University of Petroleum and Minerals.

(1989) Use of microtubes in the design of optimized trickle irrigation network. Masters thesis, King Fahd University of Petroleum and Minerals.

(1996) Performance evaluation of concrete surface treatment materials. Masters thesis, King Fahd University of Petroleum and Minerals.

(1991) Mechanisms of high durability performance of plain and blended cements. PhD thesis, King Fahd University of Petroleum and Minerals.

(1989) Investigation of leachate from a sanitary landfill in Saudi Arabia. Masters thesis, King Fahd University of Petroleum and Minerals.

(1992) Flexure and shear behaviour of damaged RC beams repaired by plate bonding. Masters thesis, King Fahd University of Petroleum and Minerals.

(1992) Optimal design of reinforced concrete frames. Masters thesis, King Fahd University of Petroleum and Minerals.

(1992) Biological treatment of hazardous contaminants in sequencing batch reacors. Masters thesis, King Fahd University of Petroleum and Minerals.

(2002) Evaluation of load transfer in axially loaded repaired concrete columns. Masters thesis, King Fahd University of Petroleum and Minerals.

(1991) Characerization of expansive soils in the Eastern Province of Saudi Arabia. Masters thesis, King Fahd University of Petroleum and Minerals.

(1998) Assesment of the geotechnical properties of stabilized sand-marl mixtures for constructional purposes. Masters thesis, King Fahd University of Petroleum and Minerals.

(1988) Study of various repair methods for reinforced concrete flexural members. Masters thesis, King Fahd University of Petroleum and Minerals.

(1992) Strengthening of damaged reinforced concrete beams by external fiber glass plates. Masters thesis, King Fahd University of Petroleum and Minerals.

(1988) Geotechnical properties of the surfacial soil of Sana'a The Yemen Arab Republic. Masters thesis, King Fahd University of Petroleum and Minerals.

(1985) Concrete mix design for hot weather. Masters thesis, King Fahd University of Petroleum and Minerals.

(1982) The Influence function technique in the numerical analysis of plate bending of arbitrary plan form. Masters thesis, King Fahd University of Petroleum and Minerals.

(1993) Experimental investigation of microbial growth in subsurface environment. Masters thesis, King Fahd University of Petroleum and Minerals.

(2000) Iterative coupling of boundary and finite element methods. PhD thesis, King Fahd University of Petroleum and Minerals.

(1995) Bond and durability of fusion-bonded epoxy-coated steel bars. Masters thesis, King Fahd University of Petroleum and Minerals.

(1996) Polymer modification of Arab Asphalt to Suit Gulf Countries' performance requirements. PhD thesis, King Fahd University of Petroleum and Minerals.

(1990) Durability of reinforced concrete beams repaired with various repair materials. Masters thesis, King Fahd University of Petroleum and Minerals.

(1990) Studying the behavior of Dhahran dune sand using the 3rd invariant stress dependent combined hardening cap model. Masters thesis, King Fahd University of Petroleum and Minerals.

(1998) Elastic plastic analysis of semi-rigid industrial frames. PhD thesis, King Fahd University of Petroleum and Minerals.

(1990) Assessment of concrete strength by lok and capo tests. Masters thesis, King Fahd University of Petroleum and Minerals.

(1996) Numerical modeling of RC slabs on tensionless elastic subgrade. Masters thesis, King Fahd University of Petroleum and Minerals.

(2000) Analysis and design of buried pipelines. Masters thesis, King Fahd University of Petroleum and Minerals.

(1997) Quantifying crude oil spill volume in homogeneous and layered porous media from product thickness in monitoring wells. Masters thesis, King Fahd University of Petroleum and Minerals.

(1995) Laboratory evaluation of hedmanite and lime modified asphalt concrete mixes. Masters thesis, King Fahd University of Petroleum and Minerals.

(2000) Analysis of laminated general shells undergoing finite rotations and large motion. PhD thesis, King Fahd University of Petroleum and Minerals.

(2005) A prediction model for the residual flexural strength of corroded reinforced concrete beams. Masters thesis, King Fahd University of Petroleum and Minerals.

(1996) Chemical stabilization of Al-Qurrayyah Eastern Saudi Sabkha soil. Masters thesis, King Fahd University of Petroleum and Minerals.

(1996) Unsteady hydrodynamic forces on spheroidal bodies. PhD thesis, King Fahd University of Petroleum and Minerals.

(1992) Numerical simulation of groundwater in the Umm Er Radhuma Aquifer at Shadco project - Eastern Province. Masters thesis, King Fahd University of Petroleum and Minerals.

(2003) The Production of activated carbon from local palm-date pits for pollution removal process. Masters thesis, King Fahd University of Petroleum and Minerals.

(1995) Prediction of shear/peeling failure in plated R/C beams. Masters thesis, King Fahd University of Petroleum and Minerals.

(1995) Evaluation of thermal resistivity of soils in Saudi Arabia. Masters thesis, King Fahd University of Petroleum and Minerals.

(1996) Performance modeling of Arabian asphalt using HP-GPC chromatography. PhD thesis, King Fahd University of Petroleum and Minerals.

(1995) Computational Modelling of shrinkage in repaired concrete. Masters thesis, King Fahd University of Petroleum and Minerals.

(2003) Effects of aggregate quality on reinforcement corrosion. Masters thesis, King Fahd University of Petroleum and Minerals.

(1982) A Study of development and performance of sulphur-based construction blocks. Masters thesis, King Fahd University of Petroleum and Minerals.

(1987) Development of guidelines for four phase traffic signal scheme in the Kingdom of Saudi Arabia. Masters thesis, King Fahd University of Petroleum and Minerals.

(1985) Static strength properties of artificially cemented sands. Masters thesis, King Fahd University of Petroleum and Minerals.

(2004) Studies on soil-foundation interaction in the Sabkha environment of Eastern Saudi Arabia. Masters thesis, King Fahd University of Petroleum and Minerals.

(1996) Effects of oily sludge landforming on the soils environment. Masters thesis, King Fahd University of Petroleum and Minerals.

(1988) Dispersion of chloroform in a saturated porous media. Masters thesis, King Fahd University of Petroleum and Minerals.

(1980) A Three-dimensional photoelastic investigation of the stress distribution in the anchorage zone of post-tensioned beams. Masters thesis, King Fahd University of Petroleum and Minerals.

(1996) The effect of casting and curing temperatures on the properties of concrete. Masters thesis, King Fahd University of Petroleum and Minerals.

(1995) Effect of captive riders in intercity mode-choice modeling. Masters thesis, King Fahd University of Petroleum and Minerals.

(1992) Studies on soil-foundation interaction in the sabkha environment of Eastern Province of Saudi Arabia. PhD thesis, King Fahd University of Petroleum and Minerals.

(1985) Studies on the evaluation of permeability and corrosion resisting characteristics of Portland pozzolan concrete. Masters thesis, King Fahd University of Petroleum and Minerals.

(1995) Characterization and stabilization of Eastern Saudi Marls. Masters thesis, King Fahd University of Petroleum and Minerals.

(2002) Development of an equivalent dispersion coefficient for a complex contaminant transport model. Masters thesis, King Fahd University of Petroleum and Minerals.

(2005) Calibration of VISSIM to the traffic conditions of Khobar and Dammam, Saudi Arabia. Masters thesis, King Fahd University of Petroleum and Minerals.

(1987) Tertiary wastewater treatment by sedimantation and sand filtration. Masters thesis, King Fahd University of Petroleum and Minerals.

(1988) Engineering properties and mineralogical composition of expansive clays in Al-Qatif area (K.S.A). Masters thesis, King Fahd University of Petroleum and Minerals.

(1999) Interface frictional characteristics of non-woven geotextile - Sabkha and - sand using pull-out tests. Masters thesis, King Fahd University of Petroleum and Minerals.

(1993) Modeling of biological wastewater treatment in sequencing batch reactors. Masters thesis, King Fahd University of Petroleum and Minerals.

(1991) Criteria for cathodic protection of steel in concrete in the context of Arabian Gulf environment. PhD thesis, King Fahd University of Petroleum and Minerals.

(1979) Biparabolic isoparametric shell element : (a version of Ahmad element). Masters thesis, King Fahd University of Petroleum and Minerals.

(2005) A study of mix design and durability of self compacting concrete. Masters thesis, King Fahd University of Petroleum and Minerals.

(1978) Optimization of Concrete strength using local aggregates from the Eastern Province of Saudi Arabia. Masters thesis, King Fahd University of Petroleum and Minerals.

(2000) An Investigation of corrosion of steel reinforcement in concrete in the Eastern Province of Saudi Arabia. Masters thesis, King Fahd University of Petroleum and Minerals.

(1993) Effect of dissolved oxygen on activated carbon uptake. PhD thesis, King Fahd University of Petroleum and Minerals.

(1987) Removal of iron and manganese with ozone. Masters thesis, King Fahd University of Petroleum and Minerals.

(1988) Parking problem of Arafat. Masters thesis, King Fahd University of Petroleum and Minerals.

(1992) Effect of dissolved oxygen on the adsorptive capacity of a granular activated charcoal for phenol and O-Cresol. Masters thesis, King Fahd University of Petroleum and Minerals.

(1982) Electrical resistivity of concrete in relation to corrosion of reinforcement. Masters thesis, King Fahd University of Petroleum and Minerals.

(1988) Analysis of horizontally curved pseudo slab type bridge deck continuous over discrete pier supports. Masters thesis, King Fahd University of Petroleum and Minerals.

(1989) Tertiary treatment of municipal sewage via slow sand filtration. Masters thesis, King Fahd University of Petroleum and Minerals.

(1987) Effect of sight distance on the safety of unsignalized intersections. Masters thesis, King Fahd University of Petroleum and Minerals.

(1985) Recycling of deteriorated asphalt pavements. Masters thesis, King Fahd University of Petroleum and Minerals.

(1997) Developing behavioral models for driver gap acceptance at priority intersections. PhD thesis, King Fahd University of Petroleum and Minerals.

(1982) Buckling of multiple braced columns. Masters thesis, King Fahd University of Petroleum and Minerals.

(2002) Plastic shrinkage cracking of blended cement concretes under hot weather conditions. Masters thesis, King Fahd University of Petroleum and Minerals.

(1991) Non-linear finite element modelling of reinforced concrete slabs. PhD thesis, King Fahd University of Petroleum and Minerals.

(1988) Fracture and permeability characteristics of thermally degraded concrete. Masters thesis, King Fahd University of Petroleum and Minerals.

(2003) Causes of female teacher work trip accidents in the Kingdom of Saudi Arabia. Masters thesis, King Fahd University of Petroleum and Minerals.

(1981) The effects of baghouse fines and mineral fillers on asphalt mix properties in the Eastern Province of Saudi Arabia. Masters thesis, King Fahd University of Petroleum and Minerals.

(0007) Progressive fracture of reinforced deck slab in girder-slab type bridge deck. Masters thesis, King Fahd University of Petroleum and Minerals.

(1997) Microbial evaluation of Al-Khobar wastewater treatment plants. Masters thesis, King Fahd University of Petroleum and Minerals.

(1998) Continuum damage model for compressive fatigue of high strength concrete. Masters thesis, King Fahd University of Petroleum and Minerals.

(1996) Plastic shrinkage cracking in hot weather conditions. Masters thesis, KFUPM.

(1986) Progressive fracture of reinforced deck slab in girder-slab type bridge deck. Masters thesis, KFUPM.

(1996) Protection of reinforced concrete using corrosion inhibitors and coatings. Masters thesis, KFUPM.

(1992) Strengthening of damaged reinforced concrete beams by external fiber glass plates. Masters thesis, KFUPM.

(1985) Studies on the evaluation of permeability and corrosion resisting characteristics of Portland pozzolan concrete. Masters thesis, KFUPM.

(1988) Study of various repair methods for reinforced concrete flexural members. Masters thesis, KFUPM.

(1996) The effect of casting and curing temperatures on the properties of concrete. Masters thesis, KFUPM.

(1993) The effect of temperature and salt contamination on corrosion of reinforcing steel in OPC and blended cement concretes. Masters thesis, KFUPM.

(1982) The Influence function technique in the numerical analysis of plate bending of arbitrary plan form. Masters thesis, KFUPM.

(1994) Three dimensional finite element analysis of brittle materials using CDM model. Masters thesis, KFUPM.

(1995) Use of small diameter cores in evaluation of in-situ concrete strength in Eastern Saudi Arabia. Masters thesis, KFUPM.

(2002) Plastic shrinkage cracking of blended cement concretes under hot weather conditions. Masters thesis, KFUPM.

(1995) Prediction of shear/peeling failure in plated R/C beams. Masters thesis, KFUPM.

(1995) Optimization of continuous post-tensioned bridge decks of prescribed lengths. Masters thesis, KFUPM.

(1991) Optimum design of continuous partially prestressed concrete beams. Masters thesis, KFUPM.

(2007) Optimum design of mat foundation. Masters thesis, KFUPM.

(1982) Performance of pozzolan cement concrete in a high chloride-sulphate environment. Masters thesis, KFUPM.

(2005) RBF-based meshless method for the analysis of thin elastic plates undergoing large deflections. Masters thesis, KFUPM.

(1994) Reduction in bond and the strength of slabs due to corrosion of reinforcement. Masters thesis, KFUPM.

(1982) Stability analysis of orthotropic plates by a mixed complementary energy method. Masters thesis, KFUPM.

(1985) Static analysis of horizontally curved bridge decks supported by flexible multi-girders. Masters thesis, KFUPM.

(1975) Strain survey on a small plate with a circular hole in the center. Masters thesis, KFUPM.

(1984) Strength of reinforced concrete beams in hot weather. Masters thesis, KFUPM.

(1988) Study of the effect of rust and corrosion of reinforcement on bond behavior. Masters thesis, KFUPM.

(1988) Study of the effect of rust and corrosion of reinforcemnt on bond behaviour. Masters thesis, KFUPM.

Cost of solar energy generated using PV panels. In: Cost of solar energy generated using PV panels.

A repair strategy for corrosion damaged concrete. In: A repair strategy for corrosion damaged concrete.

Performance of corrosion resisting steels in chloride-bearing concrete. Performance of corrosion resisting steels in chloride-bearing concrete.

(1996) Numerical modeling of RC slabs on tensionless elastic subgrade. Masters thesis, KFUPM.

(1992) Optimal design of reinforced concrete frames. Masters thesis, KFUPM.

(1978) Optimization of Concrete strength using local aggregates from the Eastern Province of Saudi Arabia. Masters thesis, KFUPM.

(1997) Optimization of parabolic steel box arches. Masters thesis, KFUPM.

(2000) Performance evaluation of concrete coatings. Masters thesis, KFUPM.

(1996) Performance evaluation of concrete surface treatment materials. Masters thesis, KFUPM.

(1989) Performance of Epoxy-injected concrete in hot weather conditions. Masters thesis, KFUPM.

(1998) Performance optimization and modeling of slurry seal and micro surfacing utilizing steel slag aggregates. Masters thesis, KFUPM.

Influence of cement composition on the corrosion of reinforcement and sulfate resistance of concrete. Influence of cement composition on the corrosion of reinforcement and sulfate resistance of concrete.

(1989) Load induced cracking and failure of concrete deck slabs in girder-slab type bridges. Masters thesis, KFUPM.

(1992) Nonlinear behavior of cylinder-plate junction on tensionless elastic subgrade. Masters thesis, KFUPM.

TOWARD SOLVING THE CONCRETE DETERIORATION PROBLEM IN THE GULF REGION. TOWARD SOLVING THE CONCRETE DETERIORATION PROBLEM IN THE GULF REGION..

Performance of plain and blended cements exposed to varying concentrations of sodium sulphate. Performance of plain and blended cements exposed to varying concentrations of sodium sulphate.

(2003) Influence of temperature and wind on moisture transport in cementitious materials. Masters thesis, KFUPM.

Performance of plain and blended cements exposed to high sulphate concentrations. Performance of plain and blended cements exposed to high sulphate concentrations.

Effect of chloride concentration in soil on reinforcement corrosion. Effect of chloride concentration in soil on reinforcement corrosion.

29Si MAS-NMR study of hydrated cement paste and mortar with varying content of fly ash. 29Si MAS-NMR study of hydrated cement paste and mortar with varying content of fly ash.

(2002) Evaluation of load transfer in axially loaded repaired concrete columns. Masters thesis, KFUPM.

(1992) Flexure and shear behaviour of damaged RC beams repaired by plate bonding. Masters thesis, KFUPM.

(1988) Fracture and permeability characteristics of thermally degraded concrete. Masters thesis, KFUPM.

(2005) Improving the performance of damaged FBECR in chloride-contaminated concrete. Masters thesis, KFUPM.

Inhibition of atmospheric corrosion of mild steel by sodium dihydrogen orthophosphate treatment. Inhibition of atmospheric corrosion of mild steel by sodium dihydrogen orthophosphate treatment.

Effect of inhibitor treatment on corrosion of steel in a salt solution. Effect of inhibitor treatment on corrosion of steel in a salt solution.

Mechanical properties and durability characteristics of polymer- and cement-based repair materials. Mechanical properties and durability characteristics of polymer- and cement-based repair materials.

Sulfate resistance of plain and blended cements exposed to varying concentrations of sodium sulfate. Sulfate resistance of plain and blended cements exposed to varying concentrations of sodium sulfate.

Effect of steel manufacturing process and atmospheric corrosion on the corrosion-resistance of steel bars in concrete. Effect of steel manufacturing process and atmospheric corrosion on the corrosion-resistance of steel bars in concrete.

Effect of rebar cleanliness and repair materials on reinforcement corrosion and flexural strength of repaired concrete beams. Effect of rebar cleanliness and repair materials on reinforcement corrosion and flexural strength of repaired concrete beams.

Effect of waterproofing coatings on steel reinforcement corrosion and physical properties of concrete. Effect of waterproofing coatings on steel reinforcement corrosion and physical properties of concrete.

Effect of environmental pre-conditioning on bond of FRP reinforcement to concrete. Effect of environmental pre-conditioning on bond of FRP reinforcement to concrete.

Evaluation of bond using FRP rods with axisymmetric deformations. Evaluation of bond using FRP rods with axisymmetric deformations.

Effect of Cyclic Loading on Bond Behavior of GFRP Rods Embedded in Concrete Beams. Effect of Cyclic Loading on Bond Behavior of GFRP Rods Embedded in Concrete Beams.

29Si MAS-NMR study of hydrated cement paste and mortar made with and without silica fume. 29Si MAS-NMR study of hydrated cement paste and mortar made with and without silica fume.

Geometries and energy separations of electronic states of GeF2, SnF2, and PbF2 and their positive ions. Geometries and energy separations of electronic states of GeF2, SnF2, and PbF2 and their positive ions.

Use of polypropylene fibers to enhance deterioration resistance of concrete surface skin subjected to cyclic wet/dry sea water exposure. Use of polypropylene fibers to enhance deterioration resistance of concrete surface skin subjected to cyclic wet/dry sea water exposure.

Corrosion of steel reinforcement in polypropylene fiber reinforced concrete structures. Corrosion of steel reinforcement in polypropylene fiber reinforced concrete structures.

EFFECT OF POLYPROPYLENE FIBER REINFORCEMENT ON THE PROPERTIES OF FRESH AND HARDENED CONCRETE IN THE ARABIAN GULF ENVIRONMENT. EFFECT OF POLYPROPYLENE FIBER REINFORCEMENT ON THE PROPERTIES OF FRESH AND HARDENED CONCRETE IN THE ARABIAN GULF ENVIRONMENT..

(1982) Electrical resistivity of concrete in relation to corrosion of reinforcement. Masters thesis, KFUPM.

(1995) Elasto-plastic collapse load analysis of single mitred bends. Masters thesis, KFUPM.

(2003) Effects of aggregate quality on reinforcement corrosion. Masters thesis, KFUPM.

(1990) Durability of reinforced concrete beams repaired with various repair materials. Masters thesis, KFUPM.

(1998) Continuum damage model for compressive fatigue of high strength concrete. Masters thesis, KFUPM.

(1985) Concrete mix design for hot weather. Masters thesis, KFUPM.

(1983) Sulfur infiltrated concrete box sections with poly styrene core as panel units. Masters thesis, KFUPM.

(1989) Use of latex modified concrete as a bridge deck overlay. Masters thesis, KFUPM.

(2005) A prediction model for the residual flexural strength of corroded reinforced concrete beams. Masters thesis, KFUPM.

(1982) A Study of development and performance of sulphur-based construction blocks. Masters thesis, KFUPM.

(2005) A study of mix design and durability of self compacting concrete. PhD thesis, KFUPM.

(1980) A Three-dimensional photoelastic investigation of the stress distribution in the anchorage zone of post-tensioned beams. Masters thesis, KFUPM.

(1981) An Investigation of corrosion of steel reinforcement in concrete in the Eastern Province of Saudi Arabia. Masters thesis, KFUPM.

(1995) Computational Modelling of shrinkage in repaired concrete. Masters thesis, KFUPM.

(2000) Analysis and design of buried pipelines. Masters thesis, KFUPM.

(1988) Analysis of horizontally curved pseudo slab type bridge deck continuous over discrete pier supports. Masters thesis, KFUPM.

(1990) Assessment of concrete strength by lok and capo tests. Masters thesis, KFUPM.

(1995) Bond and durability of fusion-bonded epoxy-coated steel bars. Masters thesis, KFUPM.

(1995) Boundary element analysis of nonprismatic beams and plates. Masters thesis, KFUPM.

(1982) Buckling of multiple braced columns. Masters thesis, KFUPM.

(1994) Chloride diffusion in concrete/prediction of the onset of corrosion in reinforced concrete structures. Masters thesis, KFUPM.

Engineering_Certification_Academic_Concerns_and_Industry_needs_Mosaed_Al-Garni_SABIC_Jubail. In: Engineering_Certification_Academic_Concerns_and_Industry_needs_Mosaed_Al-Garni_SABIC_Jubail.

Confidence_and_Uncertainty_in_Groundwater_Contaminant_Transport_Dr_Adrian_Butler_Imperial_College_London_UK. In: Confidence_and_Uncertainty_in_Groundwater_Contaminant_Transport_Dr_Adrian_Butler_Imperial_College_London_UK.

MATERIALS_FOR_THE_REPAIR_AND_STRENGTHENING_OF_CONCRETE_STRUCTURES_THE_INFLUENCE_OF_MATERIAL_PROPERTIES_ON_STRUCTURAL_PERFOR. In: MATERIALS_FOR_THE_REPAIR_AND_STRENGTHENING_OF_CONCRETE_STRUCTURES_THE_INFLUENCE_OF_MATERIAL_PROPERTIES_ON_STRUCTURAL_PERFOR.

THE_USE_OF_A_LOCAL_SOIL_IN_ENVIRONMENTAL_ENGINEERING_PROCESSES_Nabil_Abuzaid_Muhammad_Al-Malack. In: THE_USE_OF_A_LOCAL_SOIL_IN_ENVIRONMENTAL_ENGINEERING_PROCESSES_Nabil_Abuzaid_Muhammad_Al-Malack.

THE_FUNDAMENTALS_OF_ENGINEERING_EXAMINATION_THE_FIRST_STEP_FOR_THE_PROFESSIONAL_LICENSING_Dr-Omar-A-Al-Suwailem. In: THE_FUNDAMENTALS_OF_ENGINEERING_EXAMINATION_THE_FIRST_STEP_FOR_THE_PROFESSIONAL_LICENSING_Dr-Omar-A-Al-Suwailem.

INDICES_FOR_PREDICTION_OF_REPAIR_MORTAR_PERFORMANCE. In: INDICES_FOR_PREDICTION_OF_REPAIR_MORTAR_PERFORMANCE.

BLISTERING_OF_EPOXY_COATING_ON_CONCRETE_FLOOR. In: BLISTERING_OF_EPOXY_COATING_ON_CONCRETE_FLOOR.

Concrete_Durability_The_Arabiab_Gulf_Experience_Mohammed_Maslehuddin. In: Concrete_Durability_The_Arabiab_Gulf_Experience_Mohammed_Maslehuddin.

TEMPERATURE_IMPACT_ON_PAVEMENT_STRUCTURES_IN_HOT_ARID_ENVIRONMENT_Hamad_Al-abdul-Wahhab_Rezqallah_Ramadhan_and_Ibrahim_M. In: TEMPERATURE_IMPACT_ON_PAVEMENT_STRUCTURES_IN_HOT_ARID_ENVIRONMENT_Hamad_Al-abdul-Wahhab_Rezqallah_Ramadhan_and_Ibrahim_M.

Performance_of_Concrete_in_Aggressive_Environments. In: Performance_of_Concrete_in_Aggressive_Environments.

EXPERIENCES_WITH_REHABILITATION_OPTIONS_FOR_CONCRETE_STRUCTURES_IN_MADINAT_AL-JUBAIL_AL-SINAIYAH. In: EXPERIENCES_WITH_REHABILITATION_OPTIONS_FOR_CONCRETE_STRUCTURES_IN_MADINAT_AL-JUBAIL_AL-SINAIYAH.

OVERVIEW_OF_LOCAL_STATE_OF_THE_ENVIRONMENT_Ibrahim_A_Alam_Vice_Mayor_Jeddah_Municipality. In: OVERVIEW_OF_LOCAL_STATE_OF_THE_ENVIRONMENT_Ibrahim_A_Alam_Vice_Mayor_Jeddah_Municipality.

ROLE_OF_CONSTRUCTION_CHEMICALS_IN_CONCRETE_PROTECTION. In: ROLE_OF_CONSTRUCTION_CHEMICALS_IN_CONCRETE_PROTECTION.

Performance_of_Retrofitted_Concrete_Using_FRP. In: Performance_of_Retrofitted_Concrete_Using_FRP.

PROPERTIES_AND_BEHAVIOR_OF_ARID_CLIMATE_SOIL_DEPOSITS_IN_KUWAIT_Nabil_F_Ismael_Kuwait_University. In: PROPERTIES_AND_BEHAVIOR_OF_ARID_CLIMATE_SOIL_DEPOSITS_IN_KUWAIT_Nabil_F_Ismael_Kuwait_University.

THE_SHEAR_STRENGTHENING_OF_RECTANGULAR_REINFORCED_CONCRETE_BEAMS_USING_BONDED_EXTERNAL_REINFORCEMENT. In: THE_SHEAR_STRENGTHENING_OF_RECTANGULAR_REINFORCED_CONCRETE_BEAMS_USING_BONDED_EXTERNAL_REINFORCEMENT.

ENVIRONMENT_DIFFERENCES_IN_GULF_COUNTRIES-EFFECTS_ON_CONCRETE_PRACTICE_Habib_M_Lein_Al-Abideen_Deputy_Minister_for_Public_Works_Saudi_Arabia. In: ENVIRONMENT_DIFFERENCES_IN_GULF_COUNTRIES-EFFECTS_ON_CONCRETE_PRACTICE_Habib_M_Lein_Al-Abideen_Deputy_Minister_for_Public_Works_Saudi_Arabia.

WASTEWATER_IRRIGATION_AND_PHYSICO-CHEMICAL_CHANGES_IN_SOILS_Muhammad_Sadiq_and_G_Hussain_KFUPM_KAACST. In: WASTEWATER_IRRIGATION_AND_PHYSICO-CHEMICAL_CHANGES_IN_SOILS_Muhammad_Sadiq_and_G_Hussain_KFUPM_KAACST.

CHLORIDE_DIFFUSION_IN_CONCRETE_AND_ITS_IMPACT_ON_CORROSION_OF_REINFORCEMENT. In: CHLORIDE_DIFFUSION_IN_CONCRETE_AND_ITS_IMPACT_ON_CORROSION_OF_REINFORCEMENT.

CONCRETE_PERMEABILITY_A_REVIEW_OF_PROCESSES_AND_MECHANISMS. In: CONCRETE_PERMEABILITY_A_REVIEW_OF_PROCESSES_AND_MECHANISMS.

(1987) A model study of slurry-trench excavation and soil-bentonite cut-off walls. Masters thesis, KFUPM.

SLOW_SAND_FILTRATION_MICROBIAL_REMOVALS_IN_PRE-CHLORINATED_SECONDARY_EFFLUENT_Shaukat_Farooq_and_Syed_Imran. In: SLOW_SAND_FILTRATION_MICROBIAL_REMOVALS_IN_PRE-CHLORINATED_SECONDARY_EFFLUENT_Shaukat_Farooq_and_Syed_Imran.

CONTAMINANT_REMOVALS_USING_WASTEWATER_RECHARGE_Achi_Ishaq_Amir_Khan_Mohammad_Al-Suwaiyan_Shaukat Farooq_and_Saad_Aiban. In: CONTAMINANT_REMOVALS_USING_WASTEWATER_RECHARGE_Achi_Ishaq_Amir_Khan_Mohammad_Al-Suwaiyan_Shaukat Farooq_and_Saad_Aiban.

ESTIMATING_UNDER_GROUND_HYDROCARBON_SPILLS_IN_HOMOGENEOUS_AND_LAYERED_SOILS_Mohammad_Al-Suwaiyan_and_Khalid_Bashir. In: ESTIMATING_UNDER_GROUND_HYDROCARBON_SPILLS_IN_HOMOGENEOUS_AND_LAYERED_SOILS_Mohammad_Al-Suwaiyan_and_Khalid_Bashir.

Existing_Worldwide_Certification_Legislation_and_Saudi_Arabian_Integration_Richard_Martin_Saudi_Arabian_Local_Association. In: Existing_Worldwide_Certification_Legislation_and_Saudi_Arabian_Integration_Richard_Martin_Saudi_Arabian_Local_Association.

TEXAS_NATURAL_RESOURCES_CONSERVATION_COMMISSION_PROTOCOLS_FOR_CONDUCTING_RISK-BASED_ASSESSMENTS_AT_LEAKING_PETROLEUM_STORAGE_TANK_SITES_Mahbub. In: TEXAS_NATURAL_RESOURCES_CONSERVATION_COMMISSION_PROTOCOLS_FOR_CONDUCTING_RISK-BASED_ASSESSMENTS_AT_LEAKING_PETROLEUM_STORAGE_TANK_SITES_Mahbub.

Reliable_Assessment_of_Deteriorating_Structures. In: Reliable_Assessment_of_Deteriorating_Structures.

POLLUTANT_DISTRIBUTION_IN_A_SHALLOW_AQUIFER_IN_THE_EASTERN_PROVINCE_OF_SAUDI_ ARABI_Inhammad_Sadiq_and_Alarii_KFUPM_Jeddah_Municipality. In: POLLUTANT_DISTRIBUTION_IN_A_SHALLOW_AQUIFER_IN_THE_EASTERN_PROVINCE_OF_SAUDI_ ARABI_Inhammad_Sadiq_and_Alarii_KFUPM_Jeddah_Municipality.

MECHANISMS_OF_SULFATE_ATTACK_IN_PLAIN _AND_BLENDED_CEMENTS_A_REVIEW. In: MECHANISMS_OF_SULFATE_ATTACK_IN_PLAIN _AND_BLENDED_CEMENTS_A_REVIEW.

EFFECT_OF_ENVIRONMENTAL_CONDITIONING_ON_BOND_BETWEEN_COMMERICAL_FRP_RODS_AND_CONCRETE. In: EFFECT_OF_ENVIRONMENTAL_CONDITIONING_ON_BOND_BETWEEN_COMMERICAL_FRP_RODS_AND_CONCRETE.

Potential_Applications_of_Prompt_Gamma_Neutron_Activation_in_the_Nondestructive_Testing_of_Concrete_Structures. In: Potential_Applications_of_Prompt_Gamma_Neutron_Activation_in_the_Nondestructive_Testing_of_Concrete_Structures.

PREDICTION_OF_CREEP_AND_SHRINKAGE_OF_CONCRETE. In: PREDICTION_OF_CREEP_AND_SHRINKAGE_OF_CONCRETE.

ENVIRONMENTAL_IMPACTS_ON_FLEXIBLE_PAVEMENTS_IN_JEDDAH_CITY_Sabry_Ahmad_Shihata_Zaki_Abdullah_Baghdadi_KAU. In: ENVIRONMENTAL_IMPACTS_ON_FLEXIBLE_PAVEMENTS_IN_JEDDAH_CITY_Sabry_Ahmad_Shihata_Zaki_Abdullah_Baghdadi_KAU.

IMPORTANCE_OF_CERTIFICATION_OF_THOSE_INVOLVED_IN_BUILDING_INDUSTRY_Dr-Osama-Magdy-Shawa_ENTECHS_Saudi_Arabia. In: IMPORTANCE_OF_CERTIFICATION_OF_THOSE_INVOLVED_IN_BUILDING_INDUSTRY_Dr-Osama-Magdy-Shawa_ENTECHS_Saudi_Arabia.

DEVELOPMENT_OF_SELF-COMPACTING_AND_LOW_HEAT_HIGH_PERFORMANCE_CONCRETE. In: DEVELOPMENT_OF_SELF-COMPACTING_AND_LOW_HEAT_HIGH_PERFORMANCE_CONCRETE.

WATER_TABLE_RISE_AND_CONCRETE_DETERIORATION_IN_THE_SUBSURFACE_ENVIRONMENT. In: WATER_TABLE_RISE_AND_CONCRETE_DETERIORATION_IN_THE_SUBSURFACE_ENVIRONMENT.

Improvement_of_concrete_serviceability_in_hot_Weather_Environment_Dr-Wajahat_Mirza_and_Dr-Alan_Swann_CIC_Jeddah. In: Improvement_of_concrete_serviceability_in_hot_Weather_Environment_Dr-Wajahat_Mirza_and_Dr-Alan_Swann_CIC_Jeddah.

NEW_GENERATION_OF_SUPERPLASTICIZERS_FOR_HIGH_PERFORMANCE_CONCRETE. In: NEW_GENERATION_OF_SUPERPLASTICIZERS_FOR_HIGH_PERFORMANCE_CONCRETE.

CATEGORIZATION_OF_DAMAGES_TO_CONCRETE_HIGHWAY_BRIDGES. In: CATEGORIZATION_OF_DAMAGES_TO_CONCRETE_HIGHWAY_BRIDGES.

CHLORIDE_DIFFUSION_AND_CORROSION_ACTIVITY_MODELLING_THE_EFFECT_OF_BINDER_TYPE_AND_CONTENT. In: CHLORIDE_DIFFUSION_AND_CORROSION_ACTIVITY_MODELLING_THE_EFFECT_OF_BINDER_TYPE_AND_CONTENT.

Contaminant_Water_Movement_in_Unsaturated_Soil_Some_Recent_ Studies_Saud_Gutub_and_Salah-Eldin_Awadallah_KAAU. In: Contaminant_Water_Movement_in_Unsaturated_Soil_Some_Recent_ Studies_Saud_Gutub_and_Salah-Eldin_Awadallah_KAAU.

(1985) Deformation of cohesionless soils under repeated loading. Masters thesis, KFUPM.

MECHANICAL_PROPERTIES_AND_DURABILITY_OF_HIGH_PERFORMANCE_PROTECRETE_CONCRETE. In: MECHANICAL_PROPERTIES_AND_DURABILITY_OF_HIGH_PERFORMANCE_PROTECRETE_CONCRETE.

Susceptibility_of_Limestones_to_Diagenesis_and_Weathering_Processes_Abdel-Latif_Qahwash_KFUPM. In: Susceptibility_of_Limestones_to_Diagenesis_and_Weathering_Processes_Abdel-Latif_Qahwash_KFUPM.

Microsilica_Concrete_Towards_2000_in_the_Arabian_Gulf_environment. In: Microsilica_Concrete_Towards_2000_in_the_Arabian_Gulf_environment.

GROUNDWATER_MODELING_IN_ENVIRONMENTAL_STUDIES_A_N_Khondaker_M_Al-Suwaiyan_Mohammed_and_R_Allayla. In: GROUNDWATER_MODELING_IN_ENVIRONMENTAL_STUDIES_A_N_Khondaker_M_Al-Suwaiyan_Mohammed_and_R_Allayla.

Unsaturated_Soil_Problem_in_the_Kingdom_of_Saudi_Arabia_Sahel_Abduljawad. In: Unsaturated_Soil_Problem_in_the_Kingdom_of_Saudi_Arabia_Sahel_Abduljawad.

MOISTURE_CONTROL_ON_VOLUME_STABILITY_IN. In: MOISTURE_CONTROL_ON_VOLUME_STABILITY_IN.

COMPATIBILITY_OF_CLAYS_IN_DIFFERENT_CHEMICAL_ENVIRONMENTS_A_REVIEW. In: COMPATIBILITY_OF_CLAYS_IN_DIFFERENT_CHEMICAL_ENVIRONMENTS_A_REVIEW.

DETERIORATION_AND_NONDESTRUCTIVE_EVALUATION_OF_CONCRETE. In: DETERIORATION_AND_NONDESTRUCTIVE_EVALUATION_OF_CONCRETE.

Corrosion_of_Reinforced_Concrete_Advances_in_Remedial_Treatment_by_Cathodic_Protection_CLPage_Aston_University_UK. In: Corrosion_of_Reinforced_Concrete_Advances_in_Remedial_Treatment_by_Cathodic_Protection_CLPage_Aston_University_UK.

USE_OF_ROCKDUST_FOR_ENHANCING_DURABILITY_OF_CONCRETE. In: USE_OF_ROCKDUST_FOR_ENHANCING_DURABILITY_OF_CONCRETE.

(1988) Constitutive modelling of Dhahran dune sand using cap model. Masters thesis, kfupm.

(1987) Creep characteristics of local sands. Masters thesis, KFUPM.

(1997) Effect of gypsum-anhydrite on the behavior of expansive clays. Masters thesis, KFUPM.

(1997) Improvement of Eastern Saudi sabkha soils for road construction. Masters thesis, KFUPM.

(1997) Improvement of Eastern Saudi sabkha soils for road construction. Masters thesis, KFUPM.

Prediction_of_Shrinkage_and_Creep_Stresses_in_Concrete_Repair_Systems_Ali_Al-Gadhib_M-K-Rahman_and_M-Baluch. In: Prediction_of_Shrinkage_and_Creep_Stresses_in_Concrete_Repair_Systems_Ali_Al-Gadhib_M-K-Rahman_and_M-Baluch.

Testing_of_Treated_Effluent_for_use_in_Mixing_and_Curing_of_Concrete_H-Saricimen_M-Shameem_M-Barry_and_M-Ibrahim. In: Testing_of_Treated_Effluent_for_use_in_Mixing_and_Curing_of_Concrete_H-Saricimen_M-Shameem_M-Barry_and_M-Ibrahim.

CONCRETE_CORROSION_INHIBITING_ADMIXTURES. In: CONCRETE_CORROSION_INHIBITING_ADMIXTURES.

DEMARCATION_OF_SABKHA_ZONES_FROM_REMOTE_SENSING_DATA_AND_ASSESSMENT_OF_THEIR_ENGINEERING_AND_A_Al-Saafin_A_M_Al-Sary_M-Asif_Khan_and_S_Abduljauwad. In: DEMARCATION_OF_SABKHA_ZONES_FROM_REMOTE_SENSING_DATA_AND_ASSESSMENT_OF_THEIR_ENGINEERING_AND_A_Al-Saafin_A_M_Al-Sary_M-Asif_Khan_and_S_Abduljauwad.

Durability_of_Reinforced_Concrete_in_Sulfate-Chloride_Sabkha_Media_and_Methods_of_Protection_Omar_Al-Amoudi. In: Durability_of_Reinforced_Concrete_in_Sulfate-Chloride_Sabkha_Media_and_Methods_of_Protection_Omar_Al-Amoudi.

Influence_of_Arabian_Gulf_Environment_oc_Durability_of_reinforced_concrete_A_Al-Rabiah_Saudi_COWI-Consult_and_Partner. In: Influence_of_Arabian_Gulf_Environment_oc_Durability_of_reinforced_concrete_A_Al-Rabiah_Saudi_COWI-Consult_and_Partner.

An_Opinion_Survey_on_Certification_of_Civil_Engineers_in_Saudi_Arabia_A-K-Azad_I-Asi_Naser-Al-Shayea-Saleh-Al-Suwaiyan-Huseein. In: An_Opinion_Survey_on_Certification_of_Civil_Engineers_in_Saudi_Arabia_A-K-Azad_I-Asi_Naser-Al-Shayea-Saleh-Al-Suwaiyan-Huseein.

ENVIRONMENTAL_CONSIDERATION_FOR_THE_USE_OF_EPOXY-COATED_REBARS_IN_TIIE_GULF_REGION. In: ENVIRONMENTAL_CONSIDERATION_FOR_THE_USE_OF_EPOXY-COATED_REBARS_IN_TIIE_GULF_REGION.

Environment-Induced_Damage_in_Concrete_Bridges_A-k-Azad. In: Environment-Induced_Damage_in_Concrete_Bridges_A-k-Azad.

(2001) Plasto-damage model for stress-strain behavior of soil. Masters thesis, KFUPM.

(1992) Studies on soil-foundation interaction in the sabkha environment of Eastern Province of Saudi Arabia. PhD thesis, KFUPM.

(2000) The Interaction between soil and buried bent pipelines. Masters thesis, KFUPM.

(1990) Studying the behavior of Dhahran dune sand using the 3rd invariant stress dependent combined hardening cap model. Masters thesis, KFUPM.

(1998) Assesment of the geotechnical properties of stabilized sand-marl mixtures for constructional purposes. Masters thesis, KFUPM.

(2000) Behavior of laterally loaded pile group model in sand. Masters thesis, KFUPM.

(2005) Pullout capacity of block anchor in sand. Masters thesis, KFUPM.

(1988) Study of laterally loaded single pile model. Masters thesis, KFUPM.

(1995) Evaluation of thermal resistivity of soils in Saudi Arabia. Masters thesis, KFUPM.

(2001) Effect of gradation and testing procedures on the load carrying capacity of calcareous sediments. Masters thesis, KFUPM.

(1988) Geotechnical properties of the surfacial soil of Sanaa The Yemen Arab Republic. Masters thesis, KFUPM.

(1979) Uncertainty analysis in shear strength of soils and its application to stability of slope problems. Masters thesis, KFUPM.

(1998) Fracture toughness investigation of an indigenous limestone rock formation. Masters thesis, KFUPM.

(1991) Characerization of expansive soils in the Eastern Province of Saudi Arabia. Masters thesis, KFUPM.

(1995) Characterization and stabilization of Eastern Saudi Marls. Masters thesis, KFUPM.

(1997) Chemical stabilization of Al-Qurrayyah Eastern Saudi Sabkha soil. Masters thesis, KFUPM.

(1994) Swelling potential and treatment of expansive soil. Masters thesis, KFUPM.

(1999) Interface frictional characteristics of non-woven geotextile - Sabkha and - sand using pull-out tests. Masters thesis, KFUPM.

(1987) The assessment of degree of cementation in weakly to moderately cemented sands by the static cone penetrometer. Masters thesis, KFUPM.

(2004) Studies on soil-foundation interaction in the Sabkha environment of Eastern Saudi Arabia. Masters thesis, KFUPM.

(1982) Drivers' attitudes and their relationship to accident involvement in Saudi Arabia. Masters thesis, KFUPM.

(1985) Static strength properties of artificially cemented sands. Masters thesis, KFUPM.

(2005) Effect of rate of water table rise on LNAPL entrapment in uniform and well-graded sands. Masters thesis, KFUPM.

(1986) Assessment of road user charges in Saudi Arabia. Masters thesis, KFUPM.

(2000) Effects of geotextiles on the load-carrying capacity of pavements on Sabkha. Masters thesis, KFUPM.

(1988) Engineering properties and mineralogical composition of expansive clays in Al-Qatif area. Masters thesis, KFUPM.

(1988) Effect of degree of saturation, air voids and medium of attack on the durability of asphalt concrete mixes in Jeddah. Masters thesis, KFUPM.

(1986) Axle loads and pavement performance indicators for typical highways in Eastern Province. Masters thesis, KFUPM.

(2002) Characteristic study of catastrophic tire failure in Eastern Province of Saudi Arabia. Masters thesis, KFUPM.

(1985) Development of an effective patrol dispatching system for traffic police operations. Masters thesis, KFUPM.

(1987) Development of left-turn lane warrants for Saudi Arabia. Masters thesis, KFUPM.

(1989) Effect of using geotextiles on behavior of Sabkaha subgrades. Masters thesis, KFUPM.

(1985) Effect of vehicle dimensional characteristics on highway geometric design. Masters thesis, KFUPM.

(1985) Estimating the parking demand for mosques. Masters thesis, KFUPM.

(2007) Evaluating adequacy of traffic optimization models under local traffic conditions. Masters thesis, KFUPM.

(1990) Laboratory evaluation of reclaimed rubber-asphaltic concrete mixes. Masters thesis, KFUPM.

(1986) Evaluation of emulsified asphalt treated sand for road bases. Masters thesis, KFUPM.

(1997) Optimization of steel slag aggregates for bituminous mixes in Saudi Arabia. Masters thesis, KFUPM.

(1988) Prediction of pavement rutting from laboratory characterization tests. Masters thesis, KFUPM.

(1988) Evaluation of slurry seal performance in the Eastern Province of Saudi Arabia. Masters thesis, KFUPM.

(1982) Improving water resistance of asphalt concrete in Saudi Arabia. Masters thesis, KFUPM.

(1988) Laboratory evaluation of local asphalt concrete mix design procedures. Masters thesis, KFUPM.

(1989) Road traffic noise in developing countries. Masters thesis, KFUPM.

(1984) Static and dynamic triaxial tests on sulphur-asphalt-sand mixes. Masters thesis, KFUPM.

(1985) Strength of asphalt emulsion treated marl for road bases. Masters thesis, KFUPM.

(1985) Structural evaluation of in-service asphalt pavements by deflection measurements. Masters thesis, KFUPM.

(1983) Validity and use of traffic conflict technique : a study in the Kingdom of Saudi Arabia. Masters thesis, KFUPM.

(1997) A Study on the development of vehicular loding for design of highway bridges in Saudi Arabia. Masters thesis, KFUPM.

(2005) Calibration of VISSIM to the traffic conditions of Khobar and Dammam, Saudi Arabia. Masters thesis, KFUPM.

(2003) Causes of female teacher work trip accidents in the Kingdom of Saudi Arabia. Masters thesis, KFUPM.

(1987) Development of guidelines for four phase traffic signal scheme in the Kingdom of Saudi Arabia. Masters thesis, KFUPM.

(1995) Effect of captive riders in intercity mode-choice modeling. Masters thesis, KFUPM.

(1995) Laboratory evaluation of hedmanite and lime modified asphalt concrete mixes. Masters thesis, KFUPM.

(1987) Effect of sight distance on the safety of unsignalized intersections. Masters thesis, KFUPM.

(1988) Parking problem of Arafat. Masters thesis, KFUPM.

(2002) Performance modification of Saudi-asphalt binders using SABIC polymers. Masters thesis, KFUPM.

(1989) Pedestrian behavior related to accident involvement. Masters thesis, KFUPM.

(1981) The effects of baghouse fines and mineral fillers on asphalt mix properties in the Eastern Province of Saudi Arabia. Masters thesis, KFUPM.

(1997) Performance evaluation of slow sand filters: a probabilistic approach. Masters thesis, KFUPM.

(1997) Validation and improvement of rear-end traffic conflict model for safety evaluation of coordinated signal systems. Masters thesis, KFUPM.

(1996) Proposed methodology for designing the signal change interval. Masters thesis, KFUPM.

(1985) Recycling of deteriorated asphalt pavements. Masters thesis, KFUPM.

(1997) Relationship between the noncompliance behavior at signalized intersection an driver characteristics. Masters thesis, KFUPM.

(1997) Developing behavioral models for driver gap acceptance at priority intersections. PhD thesis, KFUPM.

(1997) Modeling of pavement condition and maintenance priority ranking for road networks. PhD thesis, KFUPM.

(1996) Performance modeling of Arabian asphalt using HP-GPC chromatography. PhD thesis, KFUPM.

(1996) Polymer modification of Arab Asphalt to Suit Gulf Countries' performance requirements. PhD thesis, KFUPM.

(1994) The effect of signal coordination on interesection safety. PhD thesis, KFUPM.

(1994) The effects of mode perceptions on intercity mode-choice behavior in Saudi Arabia. PhD thesis, KFUPM.

Loss Of Punching Capacity Of Bridge Deck Slabs From Crack Damage. Loss Of Punching Capacity Of Bridge Deck Slabs From Crack Damage.

Combined experimental-numerical approach to characterization of steel-glue-concrete interface. Combined experimental-numerical approach to characterization of steel-glue-concrete interface.

Nonlinear Finite Element Modelling Of Failure Modes In RC Slabs. Nonlinear Finite Element Modelling Of Failure Modes In RC Slabs.

(1999) Analysis of static and dynamic characteristics of twin-cell steel box girders. Masters thesis, KFUPM.

Stress Analysis For Thick Rectangular Plates. Stress Analysis For Thick Rectangular Plates.

Punching capacity of deck slabs in girder-slab bridges. Punching capacity of deck slabs in girder-slab bridges.

Generalized Theory For Bending Of Thick Plates. Generalized Theory For Bending Of Thick Plates.

(1980) Application of modified Reissner theory to sandwich plates. Masters thesis, KFUPM.

Guidelines toward the design of reinforced concrete beams with external plates. Guidelines Toward The Design Of Reinforced Concrete Beams With External Plates.

Repaired Reinforced Concrete Beams. Repaired Reinforced Concrete Beams.

Sensitivity study of criteria governing collapse of centrally loaded R/C slabs. Sensitivity study of criteria governing collapse of centrally loaded R/C slabs.

(1979) Approximate techniques towards solutions of Reissner plates. Masters thesis, KFUPM.

(1981) Computation of lateral-torsional buckling loads for nonprismatic beam-columns. Masters thesis, KFUPM.

Predicting residual strength in unsaturated concrete exposed to sulfate attack. Predicting residual strength in unsaturated concrete exposed to sulfate attack.

Loss of punching capacity of bridge deck slabs from crack damage. Loss of punching capacity of bridge deck slabs from crack damage.

(2005) Compliance criteria for quality concrete. Masters thesis, KFUPM.

Influence Of Non-Propagating Cracks On Conservative Buckling Of Columns. Influence Of Non-Propagating Cracks On Conservative Buckling Of Columns..

Analysis Of Continuous Curved Girder-Slab Bridges. Analysis Of Continuous Curved Girder-Slab Bridges.

Optimization Of Built-Up Nonuniform Steel I-Beams. Optimization Of Built-Up Nonuniform Steel I-Beams..

CDM model for residual strength of concrete under cyclic compression. CDM model for residual strength of concrete under cyclic compression.

Stress analysis for thick rectangular plates. Stress analysis for thick rectangular plates.

Crack minimization model for hot weather concreting. Crack minimization model for hot weather concreting.

Categorization of damage to concrete bridge decks in Saudi Arabia. Categorization of damage to concrete bridge decks in Saudi Arabia.

Performance Of Epoxy-Repaired Concrete Under Thermal Cycling. Performance Of Epoxy-Repaired Concrete Under Thermal Cycling.

Nonlinear finite element modelling of failure modes in RC slabs. Nonlinear finite element modelling of failure modes in RC slabs.

Fracture energy of weakly reinforced concrete beams. Fracture energy of weakly reinforced concrete beams.

Effect Of Thermal Cycling On The Durability Of Concrete Made From Local Materials In The Arabian Gulf Countries. Effect Of Thermal Cycling On The Durability Of Concrete Made From Local Materials In The Arabian Gulf Countries.

Effect Of Filler Type On The Durability Of Sulfur-Sand Composites In The Arabian Gulf Countries. Effect Of Filler Type On The Durability Of Sulfur-Sand Composites In The Arabian Gulf Countries..

Simulation of shrinkage distress and creep relief in concrete repair. Simulation of shrinkage distress and creep relief in concrete repair.

(1985) Corrosion of reinforcing steel in sulphur concrete. Masters thesis, KFUPM.

Performance of epoxy-repaired concrete under thermal cycling. Performance of epoxy-repaired concrete under thermal cycling.

Analysis of continuous curved girder-slab bridges. Analysis of continuous curved girder-slab bridges.

Mode shapes and crack damage in subtangential buckling of columns. Mode shapes and crack damage in subtangential buckling of columns.

Mode Shapes And Crack Damage In Subtangential Buckling Of Columns. Mode Shapes And Crack Damage In Subtangential Buckling Of Columns.

Corrosion Of Steel Reinforcement In Sulfur Concrete. Corrosion Of Steel Reinforcement In Sulfur Concrete..

Risks of cracking and delamination in patch repair. Risks of cracking and delamination in patch repair.

Inclusion Of Transverse Normal Strain Effects Into The Finite Element Formulation Of Timoshenko Beams. Inclusion Of Transverse Normal Strain Effects Into The Finite Element Formulation Of Timoshenko Beams..

Flexure Of Statically Indeterminate Cracked Beams. Flexure Of Statically Indeterminate Cracked Beams..

Use Of Plasticized Sulphur In Sisal-Fibre Concrete. Use Of Plasticized Sulphur In Sisal-Fibre Concrete..

Damage model for monotonic and fatigue response of high strength concrete. Damage model for monotonic and fatigue response of high strength concrete.

Influence Of Non-Propagating Cracks On Conservative Buckling Of Columns. Influence Of Non-Propagating Cracks On Conservative Buckling Of Columns..

Technical Theory Of Beams With Normal Strain. Technical Theory Of Beams With Normal Strain..

Corrosion Of Steel Reinforcement In Sulfur Concrete. Corrosion Of Steel Reinforcement In Sulfur Concrete..

Flexure Of Statically Indeterminate Cracked Beams. Flexure Of Statically Indeterminate Cracked Beams..

Effects Of Shear And Normal Strain On Plate Bending. Effects Of Shear And Normal Strain On Plate Bending..

Use Of Plasticized Sulphur In Sisal-Fibre Concrete. Use Of Plasticized Sulphur In Sisal-Fibre Concrete..

(1999) Captivity revisited. Captivity revisited.

Influence Functions In The Numerical Analysis Of Bending Of Thin Elastic Plates. Influence Functions In The Numerical Analysis Of Bending Of Thin Elastic Plates..

Technical Theory Of Beams With Normal Strain. Technical Theory Of Beams With Normal Strain..

Fatigue behavior of reinforced concrete beams strengthened with CFRP strips. In: Fatigue behavior of reinforced concrete beams strengthened with CFRP strips.

Effect of geotextiles on the load-carrying capacity and deformation characteristics of sabkha soil. Effect of geotextiles on the load-carrying capacity and deformation characteristics of sabkha soil.

Refined Theory For Isotropic Plates. Refined Theory For Isotropic Plates..

Comparative evaluation of plasticity theories against tension-torsion test at finite strain. In: Comparative evaluation of plasticity theories against tension-torsion test at finite strain.

Minimum Weight Design Of Tapered Steel I-Columns. Minimum Weight Design Of Tapered Steel I-Columns..

Method Of Weighted Residuals As Applied To Nonlinear Differential Equations. Method Of Weighted Residuals As Applied To Nonlinear Differential Equations..

(1983) Influence of transverse normal strain on finite, simply supported isotropic and orthotropic plates. Masters thesis, KFUPM.

(1978) Investigation into the modulus of elasticity of concrete. Masters thesis, KFUPM.

(1982) Optimization of concrete mix design using a statistical approach. Masters thesis, KFUPM.

(2006) Moisture transport and shrinkage in new generation concretes. Masters thesis, KFUPM.

(1987) Nonlinear finite element analysis of ferrocement beams. Masters thesis, KFUPM.

(1984) Material and fracture characterization of sisal fibre concrete. Masters thesis, KFUPM.

(1981) Optimizaiton of concrete mix design for durability in the Estern Province of Saudi Arabia. Masters thesis, KFUPM.

(1983) Minimum weight design of nonuniform steel I-girders and columns. Masters thesis, KFUPM.

(1986) Mixed mode fracture for concrete. Masters thesis, KFUPM.

Analytical Solution Of The Diffusion - Convection Equation Over A Finite Domain. Analytical Solution Of The Diffusion - Convection Equation Over A Finite Domain..

Refined Theory For Flexural Motions Of Isotropic Elastic Plates. Refined Theory For Flexural Motions Of Isotropic Elastic Plates..

Low free-stream turbulence in test sections through packed beds and fibrous mats. Low free-stream turbulence in test sections through packed beds and fibrous mats.

(2006) Effect of geotextile and cement on the performance of sabkha subgrade. Effect of geotextile and cement on the performance of sabkha subgrade.

Estimation of Dense Nonaqueous Phase Liquid (DNAPL) volume from monitoring wells fluid levels. Estimation of Dense Nonaqueous Phase Liquid (DNAPL) volume from monitoring wells fluid levels.

Mix Design, Durability And Creep Characteristics Of Sulphur Infiltrated Concrete. Mix Design, Durability And Creep Characteristics Of Sulphur Infiltrated Concrete..

(1985) Influence of cracks on the elastic stability of columns and frames. Masters thesis, KFUPM.

Long Term Chemical Stability Of Epichlorohydrin/Bisphenol Resin Polymer Concrete. Long Term Chemical Stability Of Epichlorohydrin/Bisphenol Resin Polymer Concrete..

Utilization of local material in the construction of an embankment for recharging groundwater aquifer with treated wastewater effluents. Utilization of local material in the construction of an embankment for recharging groundwater aquifer with treated wastewater effluents.

Estimation of spilled hydrocarbon volume - The state-of-the-art. Estimation of spilled hydrocarbon volume - The state-of-the-art.

Parameter Testing Of Epoxy Polymer Concrete. Parameter Testing Of Epoxy Polymer Concrete..

Nondeterministic evaluation of field scale-dispersivity relation. Nondeterministic evaluation of field scale-dispersivity relation.

Thick-Walled Micropolar Cylinder In A State Of Plane Strain. Thick-Walled Micropolar Cylinder In A State Of Plane Strain..

Removal of dimethyl phthalate from water by UV-H2O2 process. Removal of dimethyl phthalate from water by UV-H2O2 process.

Bending Of Micropolar Plates. Bending Of Micropolar Plates.

(1994) Deterioration of concrete structures in the coastal regions of the Republic of Yemen. Masters thesis, KFUPM.

(1988) Durability and thermal incompatibility of concrete constituents made from local materials in the Arabian Gulf Countries. Masters thesis, KFUPM.

(1984) Durability assessment criterion for concrete and reinforcement exposed to simulated environmental conditions of Saudi Arabia. Masters thesis, KFUPM.

(2005) Durability performance of GFRP bars under aggressive local exposure conditions. Masters thesis, KFUPM.

(1979) Economic proportioning of continuous steel I - beam. Masters thesis, KFUPM.

(2007) Effect of curing methods on properties of plain and blended cement concretes. Masters thesis, KFUPM.

(1987) Effect of fiber reinforcement on the durability of reinforced concrete in Arabian Gulf Region. Masters thesis, KFUPM.

(1979) Effect of the rigidity of columns and the dimensional changes in beams on post-tensioning forces. Masters thesis, KFUPM.

(1990) Evaluation of repair materials with emphasis on crack injection repair. Masters thesis, KFUPM.

(1989) Evaluation of shear behavior of ferrocement using direct shear specimen and beam specimen. Masters thesis, KFUPM.

(2007) Evaluation of ternary cements for improving concrete durability. Masters thesis, KFUPM.

(1985) Fatigue of concrete in the presence of a crack. Masters thesis, KFUPM.

(1976) Finite beams on an elastic foundation. Masters thesis, KFUPM.

(1989) Finite element modelling for the bending of thick plates. Masters thesis, KFUPM.

(1986) Flexural behavior of ferrocement I-beams and box-beams. Masters thesis, KFUPM.

(1988) Flexural behavior of ferrocement sandwich panels. Masters thesis, KFUPM.

(2006) Flexural behavior of prestressed precast hollow core slabs strengthened with CFRP sheets. Masters thesis, KFUPM.

(2007) Validation and improvement of a rear-end conflict prediction model. Transportation Research Records.

(1987) Prediction Of Head-On Accident Sites. Transportation Research Record.

(2006) Adequacy of the tensile/elongation test as a quality control criterion for vehicle tires. Polymer Testing.

(1990) Fracture modelling of reinforced concrete beams in mode I crack. Masters thesis, KFUPM.

(2004) Validation and improvement of a rear-end conflict prediction model. Transportation Research Record.

(2005) Tire condition and drivers' practice in maintaining tires in Saudi Arabia. Accident Analysis and Preventio.

(2006) Rheological investigation of the influence of acrylate polymers on the modification of asphalt. Journal of Applied Polymer Science.

(2006) Influence of polymer type and structure on polymer modified asphalt concrete mix. Canadian Journal of Chemical Engineering.

(2002) Journal of Materials in Civil Engineering. Journal of Materials in Civil Engineering.

(2002) Clegg hammer - California-bearing ratio correlations. Journal of Materials in Civil Engineering.

(2002) Stabilization of dune sand using foamed asphalt. Geotechnical Testing Journal.

(2001) Modeling resilient modulus and temperature correction for Saudi roads. Journal of Materials in Civil Engineering.

(1999) Characterization of polymer modified Gulf asphalts. Petroleum Science and Technology.

(1985) Flexural behavior of reinforced sulphur concrete beams. Masters thesis, KFUPM.

(1999) Optimization of steel slag aggregates for bituminous mixes in Saudi Arabia. Journal of Materials in Civil Engineering.

(1999) Prediction of asphalt rheological properties using HP-GPC. Journal of Materials in Civil Engineering.

(1999) Use of an analytical hierarchy process in pavement maintenance priority ranking. Journal of Quality in Maintenance Engineering.

(1998) Laboratory study of asphalt concrete durability in Jeddah. Building and Environment.

(1998) Polymer modification of Arab asphalt. Journal of Materials in Civil Engineering.

(1998) Performance of a stabilized marl base: A case study. Construction and Building Materials.

(1998) Physicochemical characterization of Gulf asphalts. Petroleum Science and Technology.

(1998) Performance-based characterization of Arab Asphalt. Building and Environment.

(1998) Improving slurry seal performance in Eastern Saudi Arabia using steel slag. Construction and Building Materials.

(1998) Evaluation of Arabian asphalt binder for low-temperature cracking. Journal of Materials in Civil Engineering.

(1997) Performance modeling of Arabian asphalt using HP-GPC. Journal of Materials Engineering and Performance.

(1997) Temperature variation of flexible and rigid pavements in Eastern Saudi Arabia. Building and Environment.

(1997) Improvement of marl and dune sand for highway construction in arid areas. Building and Environment.

(1997) Development of performance-based bitumen specifications for the Gulf countries. Construction and Building Materials.

(1991) Laboratory evaluation of reclaimed rubber asphaltic concrete mixes. Journal of Materials in Civil Engineering.

Influence of Mw of LDPE and vinyl acetate content of EVA on the rheology of polymer modified asphalt. In: Rheologica Acta, 2005.

Boussinesq Problem Of Plane Micropolar Elasticity. Boussinesq Problem Of Plane Micropolar Elasticity..

Finite Element Approach To Bending Of Micropolar Plates. Finite Element Approach To Bending Of Micropolar Plates..

On The Use Of Various Shell Theories In The Analysis Of Axisymmetrically Loaded Circular Containers. On The Use Of Various Shell Theories In The Analysis Of Axisymmetrically Loaded Circular Containers..

(2006) Self-reported attributes of traffic accident involvement by female teachers working in Saudi Arabia. In: WIT transactions on Built Environment.

(2007) Development of intercity work mode choice model for Saudi Arabia. In: WIT Transaction on Built Environment.

Analysis of radially tapered circular plate sectors by finite difference. In: Analysis of radially tapered circular plate sectors by finite difference.

Drying shrinkage stresses in concrete patch repair systems. Drying shrinkage stresses in concrete patch repair systems.

FATIGUE CRACK PROPAGATION IN PLAIN CONCRETE. In: FATIGUE CRACK PROPAGATION IN PLAIN CONCRETE..

Towards a canonical elastoplastic damage model. Towards a canonical elastoplastic damage model.

FRACTURE CHARACTERIZATION OF REINFORCED CONCRETE BEAMS. In: FRACTURE CHARACTERIZATION OF REINFORCED CONCRETE BEAMS..

Comparative evaluation of plasticity theories against tension-torsion test at finite strain. Comparative evaluation of plasticity theories against tension-torsion test at finite strain.

Principal direction paths in tension-torsion test at finite strain. Principal direction paths in tension-torsion test at finite strain.

Computational chemo-damage modelling for assessment of concrete patch repair durability. In: Computational chemo-damage modelling for assessment of concrete patch repair durability.

Effect Of Filler Type On The Durability Of Sulfur-Sand Composites In The Arabian Gulf Countries. Effect Of Filler Type On The Durability Of Sulfur-Sand Composites In The Arabian Gulf Countries..

Refined Theory For Isotropic Plates. Refined Theory For Isotropic Plates..

Minimum Weight Design Of Tapered Steel I-Columns. Minimum Weight Design Of Tapered Steel I-Columns..

Optimization Of Laterally Unsupported Unstiffened Steel I-Beams. Optimization Of Laterally Unsupported Unstiffened Steel I-Beams..

Modeling of shrinkage and creep stresses in concrete repair. Modeling of shrinkage and creep stresses in concrete repair.

Continuous Steel I-Girders: Optimum Proportioning. Continuous Steel I-Girders: Optimum Proportioning.

Economic Design Of Homogeneous I-Beams. Economic Design Of Homogeneous I-Beams.

(2007) Evaluation of Foamed Asphalt for Road base Stabilization. In: Proceeding of 7th Saudi Engineering Conference,, Dec, 2007., Riyadh, Saudi Arabia..

CDM based finite element code for concrete in 3-D. CDM based finite element code for concrete in 3-D.

Combined experimental-numerical approach to characterization of steel-glue-concrete interface. Combined experimental-numerical approach to characterization of steel-glue-concrete interface.

Sensitivity Study Of Criteria Governing Collapse Of Centrally Loaded R/C Slabs. Sensitivity Study Of Criteria Governing Collapse Of Centrally Loaded R/C Slabs.

Chloride diffusion coefficient of concrete in the Arabian Gulf environment. Chloride diffusion coefficient of concrete in the Arabian Gulf environment.

Determination of the effective chloride diffusion coefficient in concrete via a gas diffusion technique. Determination of the effective chloride diffusion coefficient in concrete via a gas diffusion technique.

Towards A Canonical Elastoplastic Damage Model. Towards A Canonical Elastoplastic Damage Model.

Modelling of damaged RC beams strengthened by fibre composite plates. Modelling of damaged RC beams strengthened by fibre composite plates.

Durability Performance Of Repaired Reinforced Concrete Beams. Durability Performance Of Repaired Reinforced Concrete Beams.

Shear strength of plated RC beams. Shear strength of plated RC beams.

Strengthening Of Initially Loaded Reinforced Concrete Beams Using FRP Plates. Strengthening Of Initially Loaded Reinforced Concrete Beams Using FRP Plates.

Peeling and diagonal tension failures in steel plated R/C beams. Peeling and diagonal tension failures in steel plated R/C beams.

Optimum post-tensioning for three-span continuous slab-type bridge decks. Optimum post-tensioning for three-span continuous slab-type bridge decks.

Assessment and repair of distressed kiln piers in a cement manufacturing plant. Assessment and repair of distressed kiln piers in a cement manufacturing plant.

Punching Capacity Of Deck Slabs In Girder-Slab Bridges. Punching Capacity Of Deck Slabs In Girder-Slab Bridges.

Effect of holidays and surface damage to FBEC on reinforcement corrosion. Effect of holidays and surface damage to FBEC on reinforcement corrosion.

Guidelines Toward The Design Of Reinforced Concrete Beams With External Plates. Guidelines Toward The Design Of Reinforced Concrete Beams With External Plates.

Computational Model For Reinforced Concrete Beams Strengthened By Epoxy Bonded Steel Plates. Computational Model For Reinforced Concrete Beams Strengthened By Epoxy Bonded Steel Plates.

(2002) Laboratory Comparison Study for the Use of Stone Matrix Asphalt in Hot Weather Climates. In: Proceedings of the First Engineering Conference,, 2002, Aden, Yemen.

Flexural Behaviour Of Precracked Reinforced Concrete Beams Strengthened Externally By Steel Plates. Flexural Behaviour Of Precracked Reinforced Concrete Beams Strengthened Externally By Steel Plates.

(2005) Effect of Anti-Stripping Agents on Asphalt-Aggregate Interactions. In: 40th IUPAC Congress, Innovations in chemistry,, 2005, Beijing, China.

(2004) Chemistry Of Bonding Between Asphalt And Aggregates. In: CHEMINDEX04, Proceedings of the Confrence ChemIndex,, 2004, Manama, Bharain.

A survey of commercial vehicle weights in Saudi Arabia. A survey of commercial vehicle weights in Saudi Arabia.

(2002) Performance Modification of Saudi-Asphalt Binders Using SABIC Polymers. In: Proceedings of the Sixth Saudi Engineering Conference,, 2002, KFUPM, Dhahran..

Optimum design of parabolic steel box arches. Optimum design of parabolic steel box arches.

Photocatalytic degradation of nitrotoluene in aqueous TiO2 suspension. Photocatalytic degradation of nitrotoluene in aqueous TiO2 suspension.

(2002) Effect of Compaction Methods on the In-situ Properties of Asphalt Concrete. In: Proceedings of the Sixth Saudi Engineering Conference,, Nov, 2002, KFUPM, Dhahran, Saudi Arabia..

(1987) An experimental model study to investigate the effect of scale on dispersion characteristics in chlorine contact. Masters thesis, KFUPM.

(1983) Bio-chemical treatment of saline domestic wastewater using RBCs. Masters thesis, KFUPM.

(1988) Effect of denitrification on dispersion of nitrate in saturated porous media. Masters thesis, KFUPM.

(1980) Environmental considerations in planning of urban areas - a case study of Dammam-Khobar-Dhahran area. Masters thesis, KFUPM.

(1990) Estimating flood quantiles in southwestern part of Saudi Arabia. Masters thesis, KFUPM.

(1985) Evaluating policy changes using a network simulation model. Masters thesis, KFUPM.

(1996) Evaluation of a patented combined water desalination and power generating plant. Masters thesis, KFUPM.

(1987) Evaluation of water quality in KFUPM drinking water system. Masters thesis, KFUPM.

(1978) Feasibility of biological nitrification process for treatment of fertilizer industry water. Masters thesis, KFUPM.

(1979) Increased runoff through reduced infiltration in Saudi Arabia. Masters thesis, KFUPM.

(1983) Influence of Ozone bubbling activity and reaction Kinetics in Ozone-Wastewater disinfection system. Masters thesis, KFUPM.

(2001) Locating optimum water quality monitoring stations in water distribution networks, using genetic algorithm. Masters thesis, KFUPM.

(2004) Optimal locations of booster disinfection stations in Al-Khobar water distribution system. Masters thesis, KFUPM.

(1987) Quality of desalinated blended seawater in Dammam. Masters thesis, KFUPM.

(1986) Tertiary wastewater treatment by direct filtration. Masters thesis, KFUPM.

(2006) Treatment of petroleum refinery wastewater using TiO2-Mediated photocatalysis. Masters thesis, KFUPM.

(2006) Treatment of simulated dairy wastewater by electrocoagulation. Masters thesis, KFUPM.

(2006) Treatment of simulated petrochemical wastewater by means of continuous electrocoagulation-ultrafiltration process. Masters thesis, KFUPM.

(2005) Treatment of the oil refinery wastewater using photocatalysis. Masters thesis, KFUPM.

(1987) Trihalomethanes (THMs) formation in a distillation process. Masters thesis, KFUPM.

(1989) Collocation on irregular domains with adaptive hermite element family for transport problems. PhD thesis, KFUPM.

(1992) Biological treatment of hazardous contaminants in sequencing batch reacors. Masters thesis, KFUPM.

(1991) Non-linear finite element modelling of reinforced concrete slabs. PhD thesis, KFUPM.

(1989) Characterization and treatment of a petrochemical wastewater for reuse. Masters thesis, KFUPM.

(2004) Combined electrooxidation and electrocoagulation processes for the treatment of municipal wastewater. Masters thesis, KFUPM.

(2002) Development of an equivalent dispersion coefficient for a complex contaminant transport model. Masters thesis, KFUPM.

(1988) Dispersion of chloroform in a saturated porous media. Masters thesis, KFUPM.

(1992) Effect of dissolved oxygen on the adsorptive capacity of a granular activated charcoal for phenol and O-Cresol. Masters thesis, KFUPM.

(1993) Evaluation of Dammam carrousel treatment plant for nitrogen removal. Masters thesis, KFUPM.

(1993) Experimental investigation of microbial growth in subsurface environment. Masters thesis, KFUPM.

(1993) Non-linear finite element analysis of reinforced concrete beams repaired by plate bonding. PhD thesis, KFUPM.

(1996) Effects of oily sludge landforming on the soils environment. Masters thesis, KFUPM.

(1989) Investigation of leachate from a sanitary landfill in Saudi Arabia. Masters thesis, KFUPM.

(1997) Fate of secondary effluent flow through porous media. Masters thesis, KFUPM.

(1995) Impact of process variables on nutrient removal in slow sand filters. Masters thesis, KFUPM.

(1997) Microbial evaluation of Al-Khobar wastewater treatment plants. Masters thesis, KFUPM.

Long-term monitoring of FBEC steel bars corrosion in chloride-contaminated concrete. In: Long-term monitoring of FBEC steel bars corrosion in chloride-contaminated concrete.

Volume change behavior of arid calcareous soils. In: Volume change behavior of arid calcareous soils.

(1998) Elastic plastic analysis of semi-rigid industrial frames. PhD thesis, KFUPM.

(2000) Iterative coupling of boundary and finite element methods. PhD thesis, KFUPM.

(1991) Mechanisms of high durability performance of plain and blended cements. PhD thesis, KFUPM.

Interferences in Prompt خ ³ Analysis of corrosive contaminants in concrete. Interferences in Prompt خ ³ Analysis of corrosive contaminants in concrete.

Plastic shrinkage cracking of blended cement concretes in hot environments. In: Plastic shrinkage cracking of blended cement concretes in hot environments.

Influence of chloride ions on sulphate deterioration in plain and blended cements. In: Influence of chloride ions on sulphate deterioration in plain and blended cements.

Prompt gamma analysis of chlorine in concrete for corrosion study. Prompt gamma analysis of chlorine in concrete for corrosion study.

Measurement of lime/silica ratio in concrete using PGNAA technique. Measurement of lime/silica ratio in concrete using PGNAA technique.

Effect of type and dosage of silica fume on plastic shrinkage in concrete exposed to hot weather. Effect of type and dosage of silica fume on plastic shrinkage in concrete exposed to hot weather.

Effect of silica fume on the mechanical properties of low quality coarse aggregate concrete. Effect of silica fume on the mechanical properties of low quality coarse aggregate concrete.

Effectiveness of surface coatings in improving concrete durability. Effectiveness of surface coatings in improving concrete durability.

Effectiveness of corrosion inhibitors in contaminated concrete. Effectiveness of corrosion inhibitors in contaminated concrete.

Characterization and chemical stabilization of Al-Qurayyah sabkha soil. Characterization and chemical stabilization of Al-Qurayyah sabkha soil.

Clegg hammer - California-bearing ratio correlations. Clegg hammer - California-bearing ratio correlations.

Durability of plain and blended cements in marine environments. Durability of plain and blended cements in marine environments.

Stabilization of dune sand using foamed asphalt. Stabilization of dune sand using foamed asphalt.

Attack on plain and blended cements exposed to aggressive sulfate environments. Attack on plain and blended cements exposed to aggressive sulfate environments.

(1991) Criteria for cathodic protection of steel in concrete in the context of Arabian Gulf environment. PhD thesis, KFUPM.

Effect of soil pollution on substructures. Effect of soil pollution on substructures.

Characteristics of silica fume and its impacts on concrete in the Arabian Gulf. Characteristics of silica fume and its impacts on concrete in the Arabian Gulf.

Effects of Calcium Sulfate on Swelling Potential of an Expansive Clay. Effects of Calcium Sulfate on Swelling Potential of an Expansive Clay.

Expansive characteristics of gypsiferous/anhydritic soil formations. Expansive characteristics of gypsiferous/anhydritic soil formations.

(1995) Canonical elastoplastic - damage modelling of reinforced concrete. PhD thesis, KFUPM.

Corrosion resistance and bond strength of epoxy-coated steel bars. Corrosion resistance and bond strength of epoxy-coated steel bars.

Performance of a stabilized marl base: A case study. Performance of a stabilized marl base: A case study.

Plastic shrinkage cracking of concrete in hot-arid environments. Plastic shrinkage cracking of concrete in hot-arid environments.

Effect of holidays and surface damage to FBEC on reinforcement corrosion. Effect of holidays and surface damage to FBEC on reinforcement corrosion.

Effect of Thermal Variations on Bond Strength of Fusion-Bonded Epoxy-Coated Bars. Effect of Thermal Variations on Bond Strength of Fusion-Bonded Epoxy-Coated Bars.

Concrete mixture design for hot weather: Experimental and statistical analyses. Concrete mixture design for hot weather: Experimental and statistical analyses.

(1989) A generalized theory for bending of thick isotropic rectangular plates. PhD thesis, KFUPM.

(2000) Analysis of laminated general shells undergoing finite rotations and large motion. PhD thesis, KFUPM.

Sulfate Attack and Reinforcement Corrosion in Plain and Blended Cements Exposed to Sulfate Environments. Sulfate Attack and Reinforcement Corrosion in Plain and Blended Cements Exposed to Sulfate Environments.

Performance and Correlation of the Properties of Fly Ash Cement Concrete. Performance and Correlation of the Properties of Fly Ash Cement Concrete.

Geotechnical behaviour of saline sabkha soils. Geotechnical behaviour of saline sabkha soils.

Compressibility and collapse characteristics of arid saline sabkha soils. Compressibility and collapse characteristics of arid saline sabkha soils.

Stabilization of an arid, saline sabkha soil using additives. Stabilization of an arid, saline sabkha soil using additives.

Performance of 15 reinforced concrete mixtures in magnesium-sodium sulphate environments. Performance of 15 reinforced concrete mixtures in magnesium-sodium sulphate environments.

Strength characteristics of sabkha soils. Strength characteristics of sabkha soils.

(1999) Simulation and assessment of concrete repair systems. PhD thesis, KFUPM.

Durability of reinforced concrete in aggressive sabkha environments. Durability of reinforced concrete in aggressive sabkha environments.

Electrochemical behaviour of steel in plain and blended cement concretes in sulphate and/or chloride environments. Electrochemical behaviour of steel in plain and blended cement concretes in sulphate and/or chloride environments.

Role of chloride ions on expansion and strength reduction in plain and blended cements in sulfate environments. Role of chloride ions on expansion and strength reduction in plain and blended cements in sulfate environments.

(2000) Elasto-damage fatigue modeling of RC beams strengthened by CFRP. PhD thesis, KFUPM.

Effect of magnesium sulfate and sodium sulfate on the durability performance of plain and blended cements. Effect of magnesium sulfate and sodium sulfate on the durability performance of plain and blended cements.

Influence of geotextiles on performance of saline sebkha soils. Influence of geotextiles on performance of saline sebkha soils.

(2000) Durability of high performance concrete. PhD thesis, KFUPM.

Chemical stabilization of sabkha soils at high moisture contents. Chemical stabilization of sabkha soils at high moisture contents.

(2004) Computational chemo-damage transport modeling of durability synergies in concrete. PhD thesis, KFUPM.

Modified oedometer for arid, saline soils. Modified oedometer for arid, saline soils.

Suggested modifications to ASTM standard methods when testing arid, saline soils. Suggested modifications to ASTM standard methods when testing arid, saline soils.

(1978) Analysis of multi girder short span highway bridges. Masters thesis, KFUPM.

Influence of sulfate ions on chloride-induced reinforcement corrosion in portland and blended cement concretes. Influence of sulfate ions on chloride-induced reinforcement corrosion in portland and blended cement concretes.

(1981) An Investigation of properties of concrete made with concrete rubble as aggregate. Masters thesis, KFUPM.

Magnesium-sodium sulfate attack in plain and blended cements. Magnesium-sodium sulfate attack in plain and blended cements.

Effect of chloride and sulfate ions on reinforcement corrosion. Effect of chloride and sulfate ions on reinforcement corrosion.

Response of sabkha to laboratory tests: a case study. Response of sabkha to laboratory tests: a case study.

Carbonation and chloride-induced corrosion of reinforcement in fly ash concretes. Carbonation and chloride-induced corrosion of reinforcement in fly ash concretes.

(1993) Modeling of biological wastewater treatment in sequencing batch reactors. Masters thesis, KFUPM.

Effect of superplasticizer on plastic shrinkage of plain and silica fume cement concretes. Effect of superplasticizer on plastic shrinkage of plain and silica fume cement concretes.

Effect of geotextile and cement on the performance of sabkha subgrade. Effect of geotextile and cement on the performance of sabkha subgrade.

Elemental analysis of concrete samples using an accelerator-based PGNAA setu. Elemental analysis of concrete samples using an accelerator-based PGNAA setu.

(1985) A Variational finite element solution for the Navier-Stokes equations in two dimensions. Masters thesis, KFUPM.

Long-term performance of fusion-bonded epoxy-coated steel bars in chloride-contaminated concrete. Long-term performance of fusion-bonded epoxy-coated steel bars in chloride-contaminated concrete.

(1998) Mechanistic Evaluation of Hedmanite and Lime Modified Asphalt Concrete Mixtures. Journal of Materials in Civil Engineering,, 10 (3). pp. 153-160.

Investigation of Sulfur modified asphalt mixes for road construction in the Gulf region. In: 4th International Gulf Conference on Roads., Doha, Qatar.. (Submitted)

(2008) Evaluation of Foam Asphalt Technology for roads construction in the Gulf. In: 4th International Gulf Conference on Roads, Nov, 2008, Doha, Qatar. (Submitted)

(2007) Evaluation of Sulfur-Asphalt Technology for Local Applications. In: 7th Saudi Engineering Conference,, Dec, 2007., Riyadh.

(2006) Comparative Study of EE2 and Polybilt Modified Asphalt Concrete. In: Third International Gulf Conference on Roads,, Oct, 2006., Muscat, Oman.

(2003) Risk and hydraulic reliability analysis of water distribution systems. Masters thesis, KFUPM.

(1989) A refined theory for symmetric orthotropic laminated plates. Masters thesis, KFUPM.

(1989) Status of hydrological network in south-western region of the Kingdom of Saudi Arabia. Masters thesis, KFUPM.

(1989) Tertiary treatment of municipal sewage via slow sand filtration. Masters thesis, KFUPM.

(1987) Tertiary wastewater treatment by sedimantation and sand filtration. Masters thesis, KFUPM.

(2003) The Production of activated carbon from local palm-date pits for pollution removal process. Masters thesis, KFUPM.

(1985) A Photoelstic investigation of stress distribution in laterally loaded thin plates simulating window glass panels. Masters thesis, KFUPM.

(2004) Treatment of refinery wastewater using crossflow membrane bioreactor. Masters thesis, KFUPM.

(1989) Use of microtubes in the design of optimized trickle irrigation network. Masters thesis, KFUPM.

(1980) A Photoelastic investigation of the stress distribution in the anchorage zones of post-tensioned concrete slabs. Masters thesis, KFUPM.

(1979) A Photoelastic investigation of stress distribution in deep beams with an without web opening. Masters thesis, KFUPM.

(1991) Treatise on solute transport in porous media and its modeling for centration-dependent permeability. PhD thesis, KFUPM.

(2002) Treatment of water contaminated with dimethyl phthalate by Fenton, Photo-Fenton and UV/H₂O₂ processes. PhD thesis, KFUPM.

(1996) Unsteady hydrodynamic forces on spheroidal bodies. PhD thesis, KFUPM.

(1995) A groundwater velocity and dissolved oxygen on bioremediation of gasoline-contaminated sandy aquifers. PhD thesis, KFUPM.

(2005) Assessment of the relationship between the spilled LNAPL volume and its thickness in monitoring wells. PhD thesis, KFUPM.

(1993) Effect of dissolved oxygen on activated carbon uptake. PhD thesis, KFUPM.

(2003) Study of reaction kinetics of a submerged membrane activated sludge process. PhD thesis, KFUPM.

Elemental analysis of concrete samples using an accelerator-based PGNAA setup. Elemental analysis of concrete samples using an accelerator-based PGNAA setup.

Long-term performance of fusion-bonded epoxy-coated steel bars in chloride-contaminated concrete. Long-term performance of fusion-bonded epoxy-coated steel bars in chloride-contaminated concrete.

Effect of superplasticizer on plastic shrinkage of plain and silica fume cement concretes. Effect of superplasticizer on plastic shrinkage of plain and silica fume cement concretes.

Effect of geotextile and cement on the performance of sabkha subgrade. Effect of geotextile and cement on the performance of sabkha subgrade.

(1998) Multiobjective water resources planning under demand, supply and quality uncertainties. Masters thesis, KFUPM.

(1994) Numerical simulation of groundwater depletion in Al-Hasa area. Masters thesis, KFUPM.

(1992) Numerical simulation of groundwater in the Umm Er Radhuma Aquifer at Shadco project. Masters thesis, KFUPM.

(1990) Performance of slow sand filters in treating secondary effluent using different sizes of local sand. Masters thesis, KFUPM.

(1997) Predicting short-duration, high-intensity rainfall in Saudi Arabia. Masters thesis, KFUPM.

(1998) Quality changes of secondary effluent as it passes through amended sand column. Masters thesis, KFUPM.

(1997) Quantifying crude oil spill volume in homogeneous and layered porous media from product thickness in monitoring wells. Masters thesis, KFUPM.

Interferences in Prompt خ³ Analysis of corrosive contaminants in concrete. Interferences in Prompt خ³ Analysis of corrosive contaminants in concrete.

(1997) Removal of microorganisms through slow sand filtration of chlorinated vs. nonchlorinated secondary effluents. Masters thesis, KFUPM.

(1991) Reliability studies of multireservoir system using stochastic approach. Masters thesis, KFUPM.

(1995) Removal of coliphage and bacteria through slow sand filtration. Masters thesis, KFUPM.

(1987) Removal of iron and manganese with ozone. Masters thesis, KFUPM.

(1992) Nonlinear Behavior of Cylinder-Plate Junction of Tensionless Elastic Subgrade. Masters thesis, KING FAHD UNIVERSITY OF PETROLEUM & MINERALS.

(1992) Optimal Design of Reinforced Concrete Frames. Masters thesis, KING FAHD UNIVERSITY OF PETROLEUM & MINERALS.

(1991) Reliability Studies of Multi-Reservoir System Using Stochastic Approach. Masters thesis, KING FAHD UNIVERSITY OF PETROLEUM & MINERALS.

(1991) Characterization of Expansive Soils in the Eastern Province of Saudi Arabia. Masters thesis, KING FAHD UNIVERSITY OF PETROLEUM & MINERALS.

(1992) Biological Treatment of Hazardous Contaminants in Sequencing Batch Reactors. Masters thesis, KING FAHD UNIVERSITY OF PETROLEUM & MINERALS.

(1992) Numerical Simulation of Groundwater in the Umm er Radhuma Aquifer at Shadco Project – Eastern Province. Masters thesis, KING FAHD UNIVERSITY OF PETROLEUM & MINERALS.

(1992) Effect of Dissolved Oxygen on the Adsorptive Capacity of a Granular Activated Charcoal For Phenol and O-Cresol. Masters thesis, KING FAHD UNIVERSITY OF PETROLEUM & MINERALS.

(1993) Modeling of Biological Wastewater Treatment in Sequencing Batch Reactors. Masters thesis, KING FAHD UNIVERSITY OF PETROLEUM & MINERALS.

(1990) Performance of Slow Sand Filters In Treating Secondary Effluent Using Different Sizes of Local Sand. Masters thesis, KING FAHD UNIVERSITY OF PETROLEUM & MINERALS.

(1992) Flexture and Shear Behaviour of Damaged RC Beams Repaired By Plate Bonding. Masters thesis, KING FAHD UNIVERSITY OF PETROLEUM & MINERALS.

CHARACTERISTICS OF THE ARABIAN GULF ENVIRONMENT AND ITS IMPACT ON CONCRETE DURABILITY – AN OVERVIEW. The 6th Saudi Engineering Conference, KFUPM, Dhahran, December 2002.

CERTIFICATION OF PRACTICING CIVIL ENGINEERS IN SAUDI ARABIA: AN OPINION SURVEY. The 6th Saudi Engineering Conference, KFUPM, Dhahran, December 2002.

SULFATE ATTACK ON PLAIN AND BLENDED CEMENTS IN SEA WATER. The 6th Saudi Engineering Conference, KFUPM, Dhahran, December 2002.

Web-based learning. INTED.

(2007) "A new mixed-mode OTA-C filter/oscillator circuit". Electronics World, 113 (1857). pp. 42-45. (In Press)

Crack Minimization Model for Hot Weather Concreting. ARABIAN JOURNAL FOR SCIENCE AND ENGINEERING, 31 (1C): 77-91 JUN 2006.

Computer Engineering

(2008) Efficient Test Compression Technique Based on Block Merging. IET Comput. Digit. Tech., 2 (5). pp. 327-335.

(2007) Parallel Algorithms for Look-Up Table (LUT) Inverse Halftoning. Masters thesis, King Fahd University of Petroleum & Minerals, Dhahran.

(2008) Parallel Inverse Halftoning by Look-Up Table (LUT) Partitioning. Arabian Journal of Science and Engineering (AJSE).

(2000) Fuzzy simulated evolution algorithm for topology design of campusnetworks. Evolutionary Computation, 2000. Proceedings of the 2000 Congress on, 1.

(1995) Performance driven standard-cell placement using the geneticalgorithm. VLSI, 1995. Proceedings., Fifth Great Lakes Symposium on, 1.

(2003) Parallel tabu search in a heterogeneous environment. Parallel and Distributed Processing Symposium, 2003. Proceedings. International, 1.

(2003) On efficient extraction of partially specified test sets for synchronous sequential circuits. Circuits and Systems, 2003. ISCAS '03. Proceedings of the 2003 International Symposium on, 5.

(2004) Thermal management of high power transformer in different outdoor environment conditions. Thermal and Thermomechanical Phenomena in Electronic Systems, 2004. ITHERM '04. The Ninth Intersociety conference, 1.

Timing influenced general-cell genetic floorplanner. Design Automation Conference, 1995. Proceedings of the ASP-DAC '95/CHDL '95/VLSI '95., IFIP International conference Hardware Description Languages, 1.

(2003) A new static differential CMOS logic with superior low power performance. Electronics, Circuits and Systems, 2003. ICECS 2003. Proceedings of the 2003 10th IEEE International conference, 2.

(2004) A class-based clustering static compaction technique for combinational circuits. Microelectronics, 2004. ICM 2004 Proceedings. The 16th International conference, 1.

(2003) High performance elliptic curve GF(2/sup k/) cryptoprocessor architecture for multimedia. Multimedia and Expo, 2003. ICME '03. Proceedings. 2003 International conference, 3.

(1992) High level synthesis of controllers for communication protocols. Circuits and Systems, 1992. ISCAS '92. Proceedings., 1992 IEEE International Symposium on, 4.

(2006) Adaptive QoS-Based Scheduler for 4G CDMA Wireless Networks. Information and Communication Technologies, 2006. ICTTA '06. 2nd, 2.

(1995) Designing ASICs with UAHPL. Circuits and Devices Magazine, IEEE, 11.

(2005) An adaptive load-balancing approach to XML-based network management using JPVM. Networks, 2005. Jointly held with the 2005 IEEE 7th Malaysia International conference Communication., 2005 13th IEEE International conference, 1.

(2003) GF(2 K) elliptic curve cryptographic processor architecture based n bit level pipelined digit serial multiplication. Computer Systems and Applications, 2003. Book of Abstracts. ACS/IEEE International conference, 1.

(2003) Analytic model for MPEG-4 and H.263 encoded video traces. Computer Systems and Applications, 2003. Book of Abstracts. ACS/IEEE International conference, 1.

(2004) Enhanced simulated evolution algorithm for digital circuit design yielding faster execution in a larger solution space. Evolutionary Computation, 2004. CEC2004. Congress on, 2.

(2004) Minimum traffic inter-BS SHO boundary selection algorithm for CDMA-based wireless networks. Radio and Wireless Conference, 2004 IEEE, 1.

(2006) Evaluating parallel simulated evolution strategies for VLSI cell placement. Parallel and Distributed Processing Symposium, 2006. IPDPS 2006. 20th International, 1.

(2003) Efficient scalable hardware architecture for Montgomery inverse computation in GF(p). Signal Processing Systems, 2003. SIPS 2003. IEEE Workshop on, 1.

(2001) Adaptive bias simulated evolution algorithm for placement. Circuits and Systems, 2001. ISCAS 2001. The 2001 IEEE International Symposium on, 5.

(1999) Fuzzy simulated evolution algorithm for multi-objectiveoptimization of VLSI placement. Evolutionary Computation, 1999. CEC 99. Proceedings of the 1999 Congress on, 1.

(1995) Hardware design and VLSI implementation of a byte-wise CRCgenerator chip. Consumer Electronics, IEEE Transactions on, 41.

(2004) Fast force-directed/simulated evolution hybrid for multiobjective VLSI cell placement. Circuits and Systems, 2004. ISCAS '04. Proceedings of the 2004 International Symposium on, 5.

(1998) Tabu search based circuit optimization. VLSI, 1998. Proceedings of the 8th Great Lakes Symposium on, 1.

(2001) A new and fast frequency response estimation technique for noisysystems. Signals, Systems and Computers, 2001. Conference Record of the Thirty-Fifth Asilomar conference, 2.

(2002) HPTS: heterogeneous parallel tabu search for VLSI placement. Evolutionary Computation, 2002. CEC '02. Proceedings of the 2002 Congress on, 1.

(2002) Fuzzy aggregating functions for multiobjective VLSI placement. Fuzzy Systems, 2002. FUZZ-IEEE'02. Proceedings of the 2002 IEEE International conference, 2.

(2006) Asynchronous MMC based parallel SA schemes for multiobjective standard cell placement. Circuits and Systems, 2006. ISCAS 2006. Proceedings. 2006 IEEE International Symposium on, 1.

(1995) Timing influenced force directed floorplanning. Design Automation Conference, 1995, with EURO-VHDL, Proceedings EURO-DAC '95., European, 1.

(2001) Iterative heuristics for multiobjective VLSI standard cellplacement. Neural Networks, 2001. Proceedings. IJCNN '01. International Joint conference, 3.

(1995) Timing driven genetic algorithm for standard-cell placement. Computers and Communications, 1995. Conference Proceedings of the 1995 IEEE Fourteenth Annual International Phoenix conference, 1.

(2006) A Study on Network Sharing and Radio Resource Management in 3G and Beyond Mobiles Wireless Networks Supporting Heterogeneous Traffic. Information and Communication Technologies, 2006. ICTTA '06. 2nd, 2.

(1999) An expandable Montgomery modular multiplication processor. Microelectronics, 1999. ICM '99. The Eleventh International conference, 1.

(2003) Simulated evolution algorithm for multiobjective VLSI netlist bi-partitioning. Circuits and Systems, 2003. ISCAS '03. Proceedings of the 2003 International Symposium on, 5.

(2003) High radix parallel architecture for GF(p) elliptic curve processor. Acoustics, Speech, and Signal Processing, 2003. Proceedings. (ICASSP '03). 2003 IEEE International conference, 2.

(1995) Loop based scheduling for high level synthesis. Computers and Communications, 1995. Conference Proceedings of the 1995 IEEE Fourteenth Annual International Phoenix conference, 1.

(2006) Novel Peak Detection Algorithms for Pileup Minimization in Gamma Ray Spectroscopy. Instrumentation and Measurement Technology Conference, 2006. IMTC 2006. Proceedings of the IEEE, 1.

(2006) Design Feasibility Study For A 500 Gbits/s AES Cypher Decypher Engine. Microelectronics, 2006. ICM '06. International conference, 1.

(1999) A high-performance hardware-efficient memory allocation techniqueand design. Computer Design, 1999. (ICCD '99) International conference, 1.

(2001) Fuzzified iterative algorithms for performance driven low powerVLSI placement. Computer Design, 2001. ICCD 2001. Proceedings. 2001 International conference, 1.

(2004) On test vector reordering for combinational circuits. Microelectronics, 2004. ICM 2004 Proceedings. The 16th International conference, 1.

(2006) On Optimizing Backoff Procedure to Enhance Throughput and Fairness For Wireless LANs. Information and Communication Technologies, 2006. ICTTA '06. 2nd, 2.

(2001) Detection of helicopters using neural nets. Instrumentation and Measurement, IEEE Transactions on, 50.

(2003) A hybrid test compression technique for efficient testing of systems-on-a-chip. Electronics, Circuits and Systems, 2003. ICECS 2003. Proceedings of the 2003 10th IEEE International conference, 2.

(2007) Packet Reservation Multiple Access (PRMA) with Random Contention. Computer Systems and Applications, 2007. AICCSA '07. IEEE/ACS International conference, 1.

(2001) An evolutionary meta-heuristic for state justification insequential automatic test pattern generation. Neural Networks, 2001. Proceedings. IJCNN '01. International Joint conference, 1.

(2005) Performance of Heterogeneous Traffic in Roaming Based Sharing Multi-Operator WCDMA Networks. Wireless Communication Systems, 2005. 2nd International Symposium on, 1.

(2003) A modified ant colony algorithm for evolutionary design of digital circuits. Evolutionary Computation, 2003. CEC '03. The 2003 Congress on, 1.

(2003) Unsupervised histogram based color image segmentation. Electronics, Circuits and Systems, 2003. ICECS 2003. Proceedings of the 2003 10th IEEE International conference, 1.

(2006) DFT for controlled-impedance I/O buffers. Design Automation Conference, 2006 43rd ACM/IEEE, 1.

(2003) Reliability and fault tolerance based topological optimization of computer networks - part I: enumerative techniques. Communications, Computers and signal Processing, 2003. PACRIM. 2003 IEEE Pacific Rim conference, 2.

(2004) Short-term hourly load forecasting using abductive networks. Power Systems, IEEE Transactions on, 19.

(2003) General iterative heuristics for VLSI multiobjective partitioning. Circuits and Systems, 2003. ISCAS '03. Proceedings of the 2003 International Symposium on, 5.

(2004) Inverse model based adaptive control of magnetic levitation system. Control Conference, 2004. 5th Asian, 3.

(1997) A survey and comparison of wormhole routing techniques in a meshnetworks. Network, IEEE, 11.

(2003) Adaptive admission/congestion control policy for hybrid TDMA/MC-CDMA integrated networks with guaranteed QoS. Electronics, Circuits and Systems, 2003. ICECS 2003. Proceedings of the 2003 10th IEEE International conference, 3.

(2006) Skin Detection using a Markov Random Field and a New Color Space. Image Processing, 2006 IEEE International conference, 1.

(2005) Should Illinois-scan based architectures be centralized or distributed? Defect and Fault Tolerance in VLSI Systems, 2005. DFT 2005. 20th IEEE International Symposium on, 1.

(2006) Finite state machine state assignment for area and power minimization. Circuits and Systems, 2006. ISCAS 2006. Proceedings. 2006 IEEE International Symposium on, 1.

(2003) Reliability and fault tolerance based topological optimization of computer networks - part II: iterative techniques. Communications, Computers and signal Processing, 2003. PACRIM. 2003 IEEE Pacific Rim conference, 2.

(2005) A Prioritized Uplink Call Admission Control Algorithm for 3G WCDMA Cellular Systems with Multi-Services. 3G and Beyond, 2005 6th IEE International conference, 1.

(1994) ASIC design with AHPL. Electrotechnical Conference, 1994. Proceedings., 7th Mediterranean, 1.

(2006) SimE/TS fuzzy hybrid for multiobjective VLSI placement. Electronics Letters, 42.

(2003) An efficient test relaxation technique for synchronous sequential circuits. VLSI Test Symposium, 2003. Proceedings. 21st, 1.

(1993) VLSI layout generation of a programmable CRC chip. Consumer Electronics, IEEE Transactions on, 39.

An Enhanced Estimator to Multi-objective OSPF Weight Setting Problem. Network Operations and Management Symposium, 2006. NOMS 2006. 10th IEEE/IFIP, 1.

(2003) Digital circuit design through simulated evolution (SimE). Evolutionary Computation, 2003. CEC '03. The 2003 Congress on, 1.

(2000) A parallel tabu search algorithm for VLSI standard-cell placement. Circuits and Systems, 2000. Proceedings. ISCAS 2000 Geneva. The 2000 IEEE International Symposium on, 2.

(2001) Fuzzy simulated evolution for power and performance optimization ofVLSI placement. Neural Networks, 2001. Proceedings. IJCNN '01. International Joint conference, 1.

(1996) Remote valve controller provides precise positioning of processcontrol valves. Southeastcon '96. 'Bringing Together Education, Science and Technology'., Proceedings of the IEEE, 1.

(1995) A novel technique for fast multiplication. Computers and Communications, 1995. Conference Proceedings of the 1995 IEEE Fourteenth Annual International Phoenix conference, 1.

(2002) Performance and low power driven VLSI standard cell placement usingtabu search. Evolutionary Computation, 2002. CEC '02. Proceedings of the 2002 Congress on, 1.

(2001) A fast constructive algorithm for fixed channel assignment problem. Circuits and Systems, 2001. ISCAS 2001. The 2001 IEEE International Symposium on, 5.

(1992) Integrating UAHPL-DA systems with VLSI design tools to support VLSIDA courses. Education, IEEE Transactions on, 35.

(2006) Interconnect-Efficient LDPC Code Design. Microelectronics, 2006. ICM '06. International conference, 1.

(2001) Bit-level pipelined digit serial GF(2m) multiplier. Circuits and Systems, 2001. ISCAS 2001. The 2001 IEEE International Symposium on, 4.

(2006) Performance improvement of dynamic source routing protocol the mobility effect of nodes in cache management. Wireless and Optical Communications Networks, 2006 IFIP International conference, 1.

(2001) An evolutionary algorithm for network topology design. Neural Networks, 2001. Proceedings. IJCNN '01. International Joint conference, 1.

(2004) Fuzzified ant colony optimization algorithm for efficient combinational circuits synthesis. Evolutionary Computation, 2004. CEC2004. Congress on, 2.

(2003) Fast elliptic curve cryptographic processor architecture based on three parallel GF(2/sup k/) bit level pipelined digit serial multipliers. Electronics, Circuits and Systems, 2003. ICECS 2003. Proceedings of the 2003 10th IEEE International conference, 1.

(2003) A static test compaction technique for combinational circuits based on independent fault clustering. Electronics, Circuits and Systems, 2003. ICECS 2003. Proceedings of the 2003 10th IEEE International conference, 3.

(1998) CMOS/BiCMOS mixed design using tabu search. Electronics Letters, 34.

(2006) An Efficient Network-on-Chip Architecture Based on the Fat-Tree (FT) Topology. Microelectronics, 2006. ICM '06. International conference, 1.

(1989) A systolic algorithm for VLSI design of a 1/N rate Viterbi decoder. Electrotechnical Conference, 1989. Proceedings. 'Integrating Research, Industry and Education in Energy and Communication Engineering', MELECON '89., Mediterranean, 1.

(1992) VLSI implementation of controllers for communication protocols fromtheir Petri net models. VLSI, 1992., Proceedings of the Second Great Lakes Symposium on, 1.

(2006) A Digital Clock Re-Timing Circuit for On-Chip Source-Synchronous Serial Links. Microelectronics, 2006. ICM '06. International conference, 1.

(2005) Parallel algorithm for hardware implementation of inverse halftoning. Circuits and Systems, 2005. ISCAS 2005. IEEE International Symposium on, 1.

(2006) An All-Digital Clock Frequency Caputring Circuitry For NRZ Data Communications. Electronics, Circuits and Systems, 2006. ICECS '06. 13th IEEE International conference, 1.

(2006) A Portable Clock Recovery Circuit (CRC) For Systems-On-Chip Serial Data Communication. Microelectronics, 2006. ICM '06. International conference, 1.

(2006) Synthesis of MVL Functions - Part I: The Genetic Algorithm Approach. Microelectronics, 2006. ICM '06. International conference, 1.

(2007) Coding Erasures with Cooperative Diversity for Wireless ad Hoc networks. In: the Second International Conference on Modeling, Simulation and Applied Optimization (ICMSAO-07), March 24-27, 2007, Abu Dhabi, UAE.

(2006) A framework for a reliable and fault-tolerant network management architecture. Masters thesis, King Fahd University of Petroleum and Minerals.

(2005) Ant colony multi-optimization algorithm for circuit bi-partitioning. Masters thesis, King Fahd University of Petroleum and Minerals.

(2005) Design of a graphical user interface to augment a telerobotic stereo-vision system. Masters thesis, King Fahd University of Petroleum and Minerals.

(2005) FSM state-assignment for area, power and testability using non-deterministic evolutionary heuristics. Masters thesis, King Fahd University of Petroleum and Minerals.

(2004) Test set compaction for sequential circuits based on test relaxation. Masters thesis, King Fahd University of Petroleum and Minerals.

(2005) Measurement based comparison between VoIPoMPLS and VoIP using software routers. Masters thesis, King Fahd University of Petroleum and Minerals.

(2005) Content-aware congestion control over MPLS networks for multimedia transmission. Masters thesis, King Fahd University of Petroleum and Minerals.

(2005) Extensions to XML-based network management. Masters thesis, King Fahd University of Petroleum and Minerals.

(2006) Power based scheduling algorithms for WCDMA networks. Masters thesis, King Fahd University of Petroleum and Minerals.

(2003) Memory performance evaluation of high throughput servers. Masters thesis, King Fahd University of Petroleum and Minerals.

(1997) Signaling traffic analysis of GSM authentication protocols. Masters thesis, King Fahd University of Petroleum and Minerals.

(1996) Evolution based scheduling of precedence computations with communication costs. Masters thesis, King Fahd University of Petroleum and Minerals.

(1998) Optimization of mixed CMOS/BiCMOS circuits using tabu search. Masters thesis, King Fahd University of Petroleum and Minerals.

(2003) Memory performance evaluation of high throughput servers. Masters thesis, King Fahd University of Petroleum and Minerals.

(1999) A Parallel Tabu search algorithm for VLSI standard cell placement. Masters thesis, King Fahd University of Petroleum and Minerals.

(2002) An Efficient test-pattern relaxation technique for synchronous sequential circuits. Masters thesis, King Fahd University of Petroleum and Minerals.

(2001) QoS-driven multicast routing algorithms. Masters thesis, King Fahd University of Petroleum and Minerals.

(1994) A C-Based high level synthesis system. Masters thesis, King Fahd University of Petroleum and Minerals.

(2001) Experimenting with evolutionary meta-heuristics for state justification in sequential ATPG. Masters thesis, King Fahd University of Petroleum and Minerals.

(1998) Fault characterization and testability considerations in multi-valued logic circuits. Masters thesis, King Fahd University of Petroleum and Minerals.

(2003) Modified ANT colony algorithm for combinational logic circuits design. Masters thesis, King Fahd University of Petroleum and Minerals.

(2004) Performance analysis and modeling of disk I/O subsystem in high throughput servers. Masters thesis, King Fahd University of Petroleum and Minerals.

(2003) Digital circuit design through simulated evolution. Masters thesis, King Fahd University of Petroleum and Minerals.

(1997) HCORDIC: a high-performance cordic algorithm. Masters thesis, King Fahd University of Petroleum and Minerals.

(1996) A new traffic control scheme for ATM networks. Masters thesis, King Fahd University of Petroleum and Minerals.

(1996) A Framework for yield enhancement of processor arrays. Masters thesis, King Fahd University of Petroleum and Minerals.

(1994) Timing driven placement algorithm for standard-cell design. Masters thesis, King Fahd University of Petroleum and Minerals.

(1995) Dataflow processor for back propagation nueral networks: architecture and performance evaluation. Masters thesis, King Fahd University of Petroleum and Minerals.

(1994) Hardware specific optimization on RTL description. Masters thesis, King Fahd University of Petroleum and Minerals.

(1996) SELF-MAP: stochastic evolution LUT-FPGA technology mapper. Masters thesis, King Fahd University of Petroleum and Minerals.

(2001) Quality of service routing. Masters thesis, King Fahd University of Petroleum and Minerals.

(2001) Iterative algorithms for timing and low power driven VLSI standard-cell placement. Masters thesis, King Fahd University of Petroleum and Minerals.

(1993) Back-end design of a formal high level synthesis system. Masters thesis, King Fahd University of Petroleum and Minerals.

(1993) Priority-based scheduling and evaluation of precedence graphs with communication times. Masters thesis, King Fahd University of Petroleum and Minerals.

(2004) Designing a self-timed arithmetic logic unit. Masters thesis, King Fahd University of Petroleum and Minerals.

(1999) Topology design of enterprise networks. Masters thesis, King Fahd University of Petroleum and Minerals.

(1998) Fuzzy logic based FPGA routing. Masters thesis, King Fahd University of Petroleum and Minerals.

(1994) Genetic algorithm for timing influenced floorplanning of VLSI designs. Masters thesis, King Fahd University of Petroleum and Minerals.

(1996) An Ethernet bridge with packet filtering and statistics collection capabilities. Masters thesis, King Fahd University of Petroleum and Minerals.

(2001) A Two-dimensional geometric-shapes-based compression scheme for deterministic testing of systems-on-a-chip. Masters thesis, King Fahd University of Petroleum and Minerals.

(1994) A framework for the VLSI implementation of systolic tree based data structures. Masters thesis, King Fahd University of Petroleum and Minerals.

(1996) Development of a congestion control scheme for ATM networks. Masters thesis, King Fahd University of Petroleum and Minerals.

(1998) Evaluation and comparison of Ingternet firewalls. Masters thesis, King Fahd University of Petroleum and Minerals.

(1997) Evaluation of pipelined switch architectures for ATM networks. Masters thesis, King Fahd University of Petroleum and Minerals.

(1997) Design and analysis of a fault-tolerant switch for B-ISDN. Masters thesis, King Fahd University of Petroleum and Minerals.

(1995) A Formal VLSI parallel description and design environment. Masters thesis, King Fahd University of Petroleum and Minerals.

(1998) Fuzzy simulated evolution algorithm for VLSI cell placement. Masters thesis, King Fahd University of Petroleum and Minerals.

(1994) Intermediate forms in high-level synthesis. Masters thesis, King Fahd University of Petroleum and Minerals.

(1998) Design and analysis of a high-performance fault-tolerant ATM network. Masters thesis, King Fahd University of Petroleum and Minerals.

(1995) On the synthesis and optimization of MVL functions. Masters thesis, King Fahd University of Petroleum and Minerals.

(1996) A Novel fast packet switch architecture for ATM networks. Masters thesis, King Fahd University of Petroleum and Minerals.

(1993) Built-in self test logic for a histogrammer memory chip. Masters thesis, King Fahd University of Petroleum and Minerals.

(1998) A Hardware model of an expandable RSA cryptographic system. Masters thesis, King Fahd University of Petroleum and Minerals.

(1998) A virtual distributed computing system. Masters thesis, King Fahd University of Petroleum and Minerals.

(1995) Timing driven floorplanning. Masters thesis, King Fahd University of Petroleum and Minerals.

(2001) The Cognitive self-structuring connectionist machine. Masters thesis, King Fahd University of Petroleum and Minerals.

(1993) An area efficient FPGA: Design using non volatile RAM. Masters thesis, King Fahd University of Petroleum and Minerals.

(2001) Multicast routing protocol with partial flooding for ad hoc wireless networks. Masters thesis, King Fahd University of Petroleum and Minerals.

(2005) Ant colony multi-optimization algorithm for circuit bi-partitioning. Masters thesis, King Fahd University of Petroleum and Minerals.

(2006) A framework for a reliable and fault-tolerant network management architecture. Masters thesis, King Fahd University of Petroleum and Minerals.

(1994) Design and modeling of a real-time RISC processor in VHDL. Masters thesis, King Fahd University of Petroleum and Minerals.

(1997) Fuzzy genetic algorithm for VLSI floorplan design. Masters thesis, King Fahd University of Petroleum and Minerals.

(2002) Evolutionary techniques for multi-objective VLSI netlist partitioning. Masters thesis, King Fahd University of Petroleum and Minerals.

(1997) Organization of parallel memories. Masters thesis, King Fahd University of Petroleum and Minerals.

(1995) AutoVLSI system: a layout system for general-cell VLSI design. Masters thesis, King Fahd University of Petroleum and Minerals.

(1995) Reliability of modular fault-tolerant hypercube networks. Masters thesis, King Fahd University of Petroleum and Minerals.

(1999) A New Hybrid CDMA/TDMA Multiuser Receiver System. In: Wireless Personal Communications: Emerging Technologies for Enhanced Communications. Kluwer Academic Publishers, pp. 111-121.

(2007) EQOSA: Energy and QoS Aware MAC for Wireless Sensor Networks. In: ISSPA 2007 International Symposium on Signal Processing and its Applications,, February 12-15, 2007, Sharjah, UAE.

(2006) An Uplink Admission Control for 3G and Beyond Roaming Based Multi-Operator Cellular Wireless Networks with Multi-Services. In: The 4th ACS/IEEE International Conference on Computer Systems and Applications, Sharjah, UAE..

(2006) An Uplink Performance Evaluation for Roaming-Based Multi-Operator WCDMA Cellular Networks. In: The 4th ACS/IEEE International Conference on Computer Systems and Applications.

(2006) Performance analysis of Internet applications over an adaptive IEEE 802.11 MAC architecture. Journal of the Franklin Institute, 343 (4-5). pp. 352-360.

(2006) Adaptive admission/congestion control policies for CDMA-based wireless internet. WIRELESS COMMUNICATIONS AND MOBILE COMPUTING, 6 (1). pp. 1-15.

(2000) A Hybrid TDMA/MC-CDMA System Utilizing Multiuser Detection for Integrated Wireless Networks. IEICE Transactions on Communications, Vol.E8 (6). pp. 1308-1320.

(2000) Performance of Adaptive Admission/Congestion Control Policies on a Hybrid MC-CDMA/TDMA Integrated Multimedia Networks. PhD thesis, Concordia Univesrity.

(2007) Impact of Mobility on Bypass AODV Protocol in Mobile Ad Hoc Network. In: The First International Workshop on Wireless Networking for Intelligent Transportation Systems.

(2008) WIRELESS FAIR QUEUING ALGORITHM FOR WINDOW-BASED LINK LEVEL RETRANSMISSION. In: The sixth ACS/IEEE International Conference on Computer Systems and Applications (AICCSA-08).

(2008) Bypass AODV: Improving Performance of Ad Hoc On-Demand Distance Vector (AODV) Routing Protocol in Wireless Ad Hoc Networks. In: First International Conference on Ambient Media and Systems (Ambi-Sys 2008), Feb. 2008, Quebce, Canada.

(2005) Performance of Heterogeneous Traffic in Roaming Based Sharing Multi Operator 4G WCDMA. In: the 2nd International Symposium on Wireless Communication Systems 2005 (ISWCS'05), Siena, Italy.

(2006) On the Performance of Downlink Power-Based Scheduling for Slotted CDMA Networks. In: 64th IEEE-VTC Fall 2006, Montreal, Canada.

(2007) An Improved MAC Algorithm for Enhanced Performance for Saturation and Non-Saturation Conditions in IEEE 802.11 WLANs. In: The Twelfth IEEE Symposium on Computers and Communications (ISCC'07, July 1-4, 2007,, Aveiro, Portugal..

(2007) An Entropy-Based Throughput metric for Fairly Evaluating WSN Routing Protocols. In: 15th IEEE International Conference on Network Protocols, Beijing, China.

(2007) A Generalized Energy-Aware Data Centric Routing For Wireless Sensor Network. In: IEEE International Conference on Signal Processing and Communication (ICSPC07), Dubai, United Arab Emirates (UAE)..

(2006) A Study on Network Sharing and Radio Resource Management in 3G and Beyond Mobiles Wireless Networks Supporting Heterogeneous Traffic. In: The 2nd IEEE Conference Information and Communication Technologies, 2006. ICTTA '06.

(2006) Adaptive QoS-Based Scheduler for 4G CDMA Wireless Networks. In: the 2nd IEEE Information and Communication Technologies, 2006. ICTTA '06.

(2006) On Optimizing Backoff Procedure to Enhance Throughput and Fairness For Wireless LANs. In: The 2nd IEEE Information and Communication Technologies, 2006. ICTTA '06.

(1999) Adaptive admission policy for priority queue integrated CDMA networks. In: IEEE Wireless Communications and Networking Conference, 1999. WCNC, New Orleans, LA, USA.

(1998) A novel traffic control in ATM-based wireless networks. In: IEEE Canadian Conference on Electrical and Computer Engineering, 1998., Waterloo, Canada.

(2003) Adaptive admission/congestion control policy for hybrid TDMA/MC-CDMA integrated networks with guaranteed QoS. In: 10th IEEE International Conference on Electronics, Circuits and Systems, 2003. ICECS 2003, 14-17 Dec. 2003, Sharjah, UAE.

(2008) WIRELESS FAIR QUEUING ALGORITHM FOR WINDOW-BASED LINK LEVEL RETRANSMISSION. In: The sixth ACS/IEEE International Conference on Computer Systems and Applications (AICCSA-08).

(1993) Back-End Design of a Formal High Level Synthesis System. Masters thesis, KING FAHD UNIVERSITY OF PETROLEUM & MINERALS.

(1993) An Area Efficient FPGA: Design using Non-Volatile RAM. Masters thesis, KING FAHD UNIVERSITY OF PETROLEUM & MINERALS.

REVIEW OF HIGH-SPEED DIGITAL CMOS CIRCUITS. The 6th Saudi Engineering Conference, KFUPM, Dhahran, December 2002.

Message Concealment Techniques using Image based Steganography. IEEEGCC 2007.

A Parallel Tabu Search Strategy for Cell Placement in VLSI Circuit Design. IEEEGCC 2007.

Reliability based Topological Optimization of Computer Networks - Part II: Iterative Techniques. IEEETEM2003.

Analysis of KFUPM Web Traffic Using Proxy Access Logs. IEEETEM2003.

A Measurement Based Memory Performance Evaluation of Streaming Media Servers. IEEETEM2003.

A METHODOLOGY FOR NETWORK TOPOLOGY DESIGN USING FUZZY EVALUATIONS. The 6th Saudi Engineering Conference, KFUPM, Dhahran, December 2002.

EVOLUTIONARY HEURISTICS FOR MULTIOBJECTIVE VLSI NETLIST BI-PARTITIONING. The 6th Saudi Engineering Conference, KFUPM, Dhahran, December 2002.

(2003) High Performance Elliptic Curve GF(2k) Crypto processor Architecture for Multimedia. In: IEEE International Conference on Multimedia & Expo, ICME 2003, July 6-9, 2003, Baltimore, Maryland, USA.

(2003) Power-time flexible architecture for GF(2k) elliptic curve cryptosystem computation. In: The 13th ACM Great Lakes Symposium on VLSI, April 28 - 29, 2003, Washington, D. C., USA.

(1998) Hardware Model of an Expandable RSA Cryptographic System. Masters thesis, King Fahd University of Petroleum and Minerals (KFUPM).

(2007) Parallelizing GF(P) Elliptic Curve Cryptography Computations for Security and Speed. In: International Conference on Information Sciences, Signal Processing and their Applications (ISSPA), February 12-15, 2007, Sharjah, United Arab Emirates.

(2006) Scalable VLSI Design for Fast GF(p) Montgomery Inverse Computation. In: IEEE International Conference on Computer & Communication Engineering (ICCCE '06), 9-11 May 2006, Faculty of Engineering, International Islamic University Malaysia, Kuala Lumpur, Malaysia.

(2000) A Modulo Multiplication Hardware Design. Project Report. Professor C. Koc, Oregon State University, ECE 575 Project Report.

(2006) Pipelining GF(P) Elliptic Curve Cryptography Computation. In: The 4th ACS/IEEE International Conference on Computer Systems and Applications (AICCSA-06), March 8-11, 2006, American University of Sharjah (AUS), Sharjah, United Arab Emirates.

(2005) Speeding Up a Scalable Modular Inversion Hardware Architecture. Project Report. KFUPM, Bio-Inspired Intelligent System (BIIS) research group.

(2004) Super Pipelined Digit Serial Adders for Multimedia and e-Security. In: IEEE 1st International Computer Engineering Conference on New Technologies for the Information Society (ICENCO 2004), December 27-30, 2004, Faculty of Engineering, Cairo University, Cairo, EGYPT.

(2003) VLSI Core Architecture For GF(P) Elliptic Curve Crypto Processor. In: IEEE 10th International Conference on Electronics, Circuits and Systems (ICECS 2003), December 14-17, 2003, University of Sharjah, United Arab Emirates.

(2003) Fast Elliptic Curve Cryptographic Processor Architecture Based On Three Parallel GF(2k) Bit Level Pipelined Digit Serial Multipliers. In: IEEE 10th International Conference on Electronics, Circuits and Systems (ICECS 2003), December 14-17, 2003, University of Sharjah, United Arab Emirates.

(2003) Improving Cryptographic Architectures by Adopting Efficient Adders in their Modular Multiplication Hardware VLSI. In: The 9th Annual Gulf Internet Symposium, October 13-15, 2003, Khobar, Saudi Arabia.

(2003) Efficient Scalable Hardware Architecture for Montgomery Inverse Computation in GF(P). In: IEEE Workshop on Signal Processing Systems (SIPS’03), August 27-29, 2003, Seoul, Korea.

(2003) GF(2k) Elliptic Curve Cryptographic Processor Architecture Based on Bit Level Pipelined Digit Serial Multiplication. In: ACS/IEEE International Conference on Computer Systems and Applications (AICCSA'03), July 14-18, 2003, Tunisia.

(2002) Scalable VLSI Architecture for GF(p) Montgomery Modular Inverse Computation. In: IEEE Computer Society Annual Symposium on VLSI, ISVLSI’02, April 25-26, 2002, Pittsburgh, Pennsylvania, USA.

(2002) Scalable and Unified Hardware to Compute Montgomery Inverse in GF(p) and GF(2n). In: Workshop on Cryptographic Hardware and Embedded Systems CHES’2002, August 13-15, 2002, San Francisco Bay (Redwood City), USA.

(2003) High Speed Low Power GF(2k) Elliptic Curve Cryptography Processor Architecture. Technical Report. IEEE 10th Annual Technical Exchange Meeting, KFUPM, Dhahran 31261, Saudi Arabia.

(2003) High Radix Parallel Architecture For GF(p) Elliptic Curve Processor. In: IEEE Conference on Acoustics, Speech, and Signal Processing, ICASSP 2003, April 6-10, 2003, Hong Kong.

Evaluating Parallel Simulated Evolution Strategies for VLSI Cell Placement. Evaluating Parallel Simulated Evolution Strategies for VLSI Cell.

(1993) Design and Analysis of a High Speed Sense Amplifier for Single Transistor Non-Volatile Memory Cells. IEE Proceedings G on Circuits, Devices and Systems, 140 (2). pp. 117-122.

(1992) Design, Selection and Implementation of Flash Erase EEPROM Memory Cell Structures. IEE Proceedings G on Circuits, Devices and Systems, 139 (3). pp. 370-376.

(1993) A Speed-Optimized Array Architecture for Flash EEPROMS. IEE Proceedings G on Circuits, Devices and Systems, 140 (3). pp. 177-181.

(1996) A Generic DFT Approach for Pattern Sensitive Faults in Word-Oriented Memories. IEE Proceedings E on Computers and Digital Techniques, 143 (3). pp. 199-202.

(2006) A High-Speed Self-Timed Carry-Skip Adder. IEE Proceedings - Circuits, Devices and Systems, 153 (6). pp. 574-582.

(2007) Area-Efficient High-Speed Carry Chain. IET Electronics Letters, 43 (23). pp. 1258-1260.

(2006) Hardware Implementations of GF(2^m) Arithmetic using Normal Basis. Journal of Applied Sciences, 6 (6). pp. 1362-1372.

(2007) A Novel Arabic Text Steganography Method Using Letter Points and Extensions. In: WASET International Conference on Computer, Information and Systems Science and Engineering (ICCISSE), May 25-27, 2007, Vienna, Austria.

(2008) Efficient Adders to Speedup Modular Multiplication for Cryptography. In: WoSPA 2008 - International Workshop on Signal Processing and its Applications, 18 – 20 March 2008, University of Sharjah, Sharjah, U.A.E..

(1999) An Expandable Montgomery Modular Multiplication Processor. In: ICM '99: The Eleventh International Conference on Microelectronics, 22-24 Nov. 1999, Kuwait.

(2007) Approximation Techniques For Analytical Characterization Of Downlink Traffic Power For Multi-Service CDMA Networks. In: 15th IEEE International Conference on Networks (ICON2007), 19-21 November, 2007, Adelaide, South Australia.

(2007) Performance Analysis of Adaptive Rate Scheduling Scheme for 3G WCDMA Wireless Networks with Multi-Operators. In: IEEE International Conference on Communications 2007 - ICC-2007, 24-28 June 2007, Glasgow, Scotland.

(2007) Downlink Traffic Power Characterization for Multi- Rate Wireless CDMA Data Networks. In: 2007 IEEE 66th Vehicular Technology Conference, 30 September - 3 October 2007, Baltimore, MD, USA.

Improving the Classification of Multiple Disorders with Problem Decomposition. JOURNAL OF BIOMEDICAL INFORMATICS, 39 (6): 612-625 DEC 2006.

Prediction of evaporation losses in wet cooling towers. Heat Transfer Engineering, 27(9):86–92, 2006.

EFFICIENT ALGORITHM FOR WEINBERGER ARRAY FOLDING. INTERNATIONAL JOURNAL OF ELECTRONICS 69 (4): 509-518 OCT 1990.

GENETIC SCHEDULING OF TASK GRAPHS. INTERNATIONAL JOURNAL OF ELECTRONICS 77 (4): 401-415 OCT 1994.

GAP - A GENETIC ALGORITHM APPROACH TO OPTIMIZE 2-BIT DECODER PLAS. INTERNATIONAL JOURNAL OF ELECTRONICS 76 (1): 99-106 JAN 1994.

The architecture of a highly reconfigurable RISC dataflow array processor. INTERNATIONAL JOURNAL OF ELECTRONICS 83 (4): 493-518 OCT 1997.

Scheduling and allocation in high-level synthesis using stochastic techniques. MICROELECTRONICS JOURNAL 27 (8): 693-712 NOV 1996.

High-level synthesis from purely behavioral descriptions. COMPUTER SYSTEMS SCIENCE AND ENGINEERING 11 (5): 259-273 SEP 1996.

Formal synthesis of VLSI layouts from algorithmic specifications. COMPUTER SYSTEMS SCIENCE AND ENGINEERING 11 (2): 67-81 MAR 1996.

Timing driven genetic placement. COMPUTER SYSTEMS SCIENCE AND ENGINEERING 14 (1): 3-14 JAN 1999.

UNIVERSAL ALPHA-A LANGUAGE FOR VLSI DESIGN AUTOMATION. IEEE CIRCUITS AND DEVICES MAGAZINE, 8-14 SEP 1986.

A CMOS CELL FOR PARALLELLY LOADABLE COUNTERS. INTERNATIONAL JOURNAL OF ELECTRONICS, 62 (6): 867-871 NOV 1987.

BIT-SLICE MICROPROCESSOR-BASED COMMUNICATIONS DECODER. MICROPROCESSORS AND MICROSYSTEMS 11 (10): 527-533 DEC 1987.

A GENERAL REAL-TIME DECODER BASED ON AMD2900 DEVICES. MICROPROCESSING AND MICROPROGRAMMING 22 (2): 97-113 FEB 1988.

CAD TOOL FOR THE AUTOMATIC-GENERATION OF MICROPROGRAMS. MICROPROCESSORS AND MICROSYSTEMS 12 (8): 463-470 OCT 1988.

AUTOMATIC WEINBERGER ARRAY SYNTHESIS FROM UAHPL DESCRIPTION. INTERNATIONAL JOURNAL OF ELECTRONICS 69 (2): 211-224 AUG 1990.

STATE MACHINE SYNTHESIS WITH WEINBERGER ARRAYS. INTERNATIONAL JOURNAL OF ELECTRONICS 71 (1): 1-12 JUL 1991.

INTEGRATING UAHPL-DA SYSTEMS WITH VLSI DESIGN TOOLS TO SUPPORT VLSI DA COURSES. IEEE TRANSACTIONS ON EDUCATION 35 (4): 321-330 NOV 1992.

Topology design of switched enterprise networks using a fuzzy simulated evolution algorithm. ENGINEERING APPLICATIONS OF ARTIFICIAL INTELLIGENCE 15 (3-4): 327-340 JUN-AUG 2002.

VLSI LAYOUT GENERATION OF A PROGRAMMABLE CRC CHIP. IEEE TRANSACTIONS ON CONSUMER ELECTRONICS 39 (4): 911-916 NOV 1993.

DESIGNING ASICS WITH UAHPL. IEEE CIRCUITS AND DEVICES MAGAZINE 11 (2): 14-24 MAR 1995.

HARDWARE DESIGN AND VLSI IMPLEMENTATION OF A BYTE-WISE CRC GENERATOR CHIP. IEEE CIRCUITS AND DEVICES MAGAZINE 11 (2): 14-24 MAR 1995.

EFFICIENT NETWORK FOLDING TECHNIQUES FOR ROUTING PERMUTATIONS IN VLSI. IEEE TRANSACTIONS ON VERY LARGE SCALE INTEGRATION (VLSI) SYSTEMS 3 (2): 254-263 JUN 1995.

VLSI DESIGN AND IMPLEMENTATION OF SYSTOLIC TREE QUEUES. MICROPROCESSORS AND MICROSYSTEMS 19 (3): 139-146 APR 1995.

Static Weighted Load-balancing for XML-based Network Management using JPVM. In: The 8th IFIP/IEEE International Conference on Management of Multimedia Networks and Services (MMNS 2005), October 24-26, 2005, Barcelona, Spain.

Optimising OSPF Routing for Link Failure Scenarios. In: Optimising OSPF Routing for Link Failure. (Unpublished)

An Adaptive Load-balancing Approach to XML-based Network Management using JPVM. In: An Adaptive Load-balancing Approach to XML-based Network Management using JPVM, November 16-18, 2005, Kuala Lumpur, Malaysia.

(2003) The Use of Enumerative Techniques in Topological Optimization of Computer Networks Subject to Fault Tolerance and Reliability. Infocomm. pp. 1-7.

(2007) A Stochastic Approach To Solving The Weight Setting Problem in OSPF Networks. Masters thesis, KFUPM.

(2007) Effective Parallelization of Stochastic Evolution. In: ISDA'07 Conference. (Unpublished)

(2006) Parallel Stochastic Evolution Algorithms for Constrained Multiobjective Optimization. In: SNPD'07. (Unpublished)

(2004) Parallelization of Stochastic Evolution for Cell Placement. KFUPM. (Unpublished)

Parallelization of Stochastic Evolution for Cell Placement. KFUPM. (Unpublished)

(2002) ENUMERATIVE TECHNIQUES IN TOPOLOGICAL OPTIMIZATION OF COMPUTER NETWORKS SUBJECT TO FAULT TOLERANCE AND RELIABILITY. Parallel and Distributed Computing and Systems.

Scheduling and allocation in high-level synthesis using stochastic techniques. MICROELECTRONICS JOURNAL 27 (8): 693-712 NOV 1996.

Timing influenced general-cell genetic floorplanner. MICROELECTRONICS JOURNAL 28 (2): 151-166 FEB 1997.

CMOS/BiCMOS mixed design using tabu search. ELECTRONICS LETTERS 34 (14): 1395-1396 JUL 9 1998.

A novel technique for fast multiplication. INTERNATIONAL JOURNAL OF ELECTRONICS 86 (1): 67-77 JAN 1999.

Fuzzy genetic algorithm for floorplanning. ENGINEERING INTELLIGENT SYSTEMS FOR ELECTRICAL ENGINEERING AND COMMUNICATIONS 8 (3): 145-153 SEP 2000.

Evolutionary algorithms, simulated annealing and tabu search: a comparative study. ENGINEERING APPLICATIONS OF ARTIFICIAL INTELLIGENCE 14 (2): 167-181 APR 2001.

Parallelizing Tabu Search on a Cluster of HeterogeneousWorkstations. JOURNAL OF HEURISTICS 8 (3): 277-304 MAY 2002.

Fuzzy evolutionary hybrid metaheuristic for network topology design. LECTURE NOTES IN COMPUTER SCIENCE 1993: 400-415 2001.

QoS-driven multicast tree generation using tabu search. COMPUTER COMMUNICATIONS 25 (11-12): 1140-1149 Sp. Iss. SI JUL 1 2002.

Tabu searchbased circuit optimization. ENGINEERING APPLICATIONS OF ARTIFICIAL INTELLIGENCE 15 (3-4): 357-368 JUN-AUG 2002.

Topology design of switched enterprise networks using a fuzzy simulated evolution algorithm. ENGINEERING APPLICATIONS OF ARTIFICIAL INTELLIGENCE 15 (3-4): 327-340 JUN-AUG 2002.

A simulated evolution approach to task-matching and scheduling in heterogeneous computing environments. ENGINEERING APPLICATIONS OF ARTIFICIAL INTELLIGENCE 15 (5): 491-500 SEP 2002.

Simulated evolution for timing and low power VLSI standard cell placement. ENGINEERING APPLICATIONS OF ARTIFICIAL INTELLIGENCE 16 (5-6): 407-423 AUG-SEP 2003.

A FUZZY EVOLUTIONARY ALGORITHM FOR TOPOLOGY DESIGN OF CAMPUS NETWORKS. ARABIAN JOURNAL FOR SCIENCE AND ENGINEERING 29 (2B): 195-212 OCT 2004.

(2005) Evolutionary algorithms for state justification in sequential automatic test pattern generation.

(2005) A Parallel Tabu Search Algorithm for Optimizing Multiobjective VLSI Placement. LECTURE NOTES IN COMPUTER SCIENCE 3483: 587-595 2005.

(2006) Evolutionary Algorithms for VLSIMultiobjective Netlist Partitioning. ENGINEERING INTELLIGENT SYSTEMS FOR ELECTRICAL ENGINEERING AND COMMUNICATIONS 13 (1): 15-21 MAR 2005.

SimE/TS fuzzy hybrid for multiobjective VLSI placement. ELECTRONICS LETTERS 42 (6): 364-365 MAR 16 2006.

(2006) FAST FUZZY FORCE-DIRECTED/SIMULATED EVOLUTION METAHEURISTIC FOR MULTIOBJECTIVE VLSI CELL PLACEMENT. Arabian Journal for Science and Engineering Submitted Jun 2006.

Designing Cellular Mobile Networks Using Non{Deterministic Iterative Heuristics. Journal of Applied Soft Computing submitted Oct 2006.

A Parallel Algorithm for Inverse Halftoning and its Hardware Implementation. Arabian Journal of Science and Engineering (AJSE) Submitted Dec 2006.

Exploring Asynchronous MMC based Parallel SA Schemes for Multiobjective Cell Placement on a Cluster-of-Workstations. Journal of CLUSTER COMPUTING: SUBMITTED: SEPT 2007.

Trends in Internet Usage & its Social Effects in Saudi Arabia. In: Department of Computer Engineering, KFUPM.

Storage Media. In: Department of Computer Engineering, KFUPM.

Storage Media[Compatibility Mode]. In: Department of Computer Engineering, KFUPM.

STRATEGIC RESEARCH PROJECTS BRIEF. In: Department of Computer Engineering, KFUPM.

Structured Backbone Design of CNs. In: Department of Computer Engineering, KFUPM.

“Summary Report” Structure of National IT Plan for Saudi Arabia. In: Department of Computer Engineering, KFUPM.

Synchronous /Asynchronous Transmission. In: Department of Computer Engineering, KFUPM.

Tabu Search Based Circuit Optimization. In: Department of Computer Engineering, KFUPM.

Exploring Asynchronous MMC Based Parallel SA Schemes for Multiobjective Cell-Placement on a Cluster of Workstations. Cluster Computing, The Journal of Networks, Software Tools and Applications. ISSN ISSN: 1386-7857 (print version), ISSN: 1573-7543 (electronic version) (Submitted)

(2007) Evaluating Parallel Simulated Evolution Strategies for VLSI Cell Placement. Journal of Mathematical Modelling and Algorithms (JMMA), 6 (3). pp. 433-454. ISSN 1570-1166 (Print) 1572-9214 (Online)

(2005) Multiobjective VLSI Cell Placement Using Distributed Simulated Evolution Algorithm. In: International Symposium on Circuits and Systems, (ISCAS 05), Kobe, Japan.

(2006) Asynchronous MMC based Parallel SA Schemes for Multiobjective Standard Cell Placement. In: International Symposium on Circuits and Systems, (ISCAS 06), Kos, Greece.

Introduction to TCP/IP. In: Departement of Computer Engineering, KFUPM, Dhahran, Saudi Arabia.

TCP/IP. In: Department of Computer Engineering, KFUPM.

Strategy Planning for Higher Education Project Horizon. In: King Fahd University of Petroleum & Minerals.

The Aafaq Web. In: Department of Computer Engineering, KFUPM.

(2001) Iterative Heuristics for Timing & low power VLSI standard cell placement. In: Unknown. (Unpublished)

Iterative Heuristics for Timing & Low Power VLSI Standard Cell Placement. In: KFUPM Project Number COE/ITERATE/221, KFUPM.

The COE Department. In: Computer Engineering Department, KFUPM.

Transmission Media. In: Department of Computer Engineering, KFUPM.

Use and Effect of Internet in Saudi Arabia. In: Department of Computer Engineering, KFUPM.

Modern Digital System Design Using VHDL: A Practical Introduction. In: Department of Computer Engineering, KFUPM.

WWW & E-Commerce. In: Department of Computer Engineering, KFUPM.

Web Database Connectivity. In: Computer Engineering Department, KFUPM.

Windows NT Installation. In: Department of Computer Engineering, King Fahd University of Petroleum and Minerals.

Active Directory. In: Departement of Computer Engineering, KFUPM, Dhahran, Saudi Arabia.

(2006) Evaluating Parallel Simulated Evolution Strategies for VLSI Cell Placement. In: International Parallel and Distributed Processing Symposium, April, 2006, Rhodes Island, Greece.

(2005) Comparative Evaluation of Parallelization Strategies for Evolutionary and Stochastic Heuristics. In: Genetic and Evolutionary Computation Conference (GECCO-2005),, 25-29 June, 2005, Washington D.C. , USA.

(1997) The Pitfalls of Necessary Assignments. Fourth International Test Synthesis Workshop.

(1998) A Fast Sequential Learning Technique for Real Circuits with Application to Enhancing ATPG Performance. 32nd Design Automation Congference. pp. 625-631.

(2005) Evolutionary Algorithms for VLSI Multiobjective Netlist Partitioning. In: Unknown.

FUZZIFIED SIMULATED EVOLUTION ALGORITHM FOR MULTI-OBJECTIVE OPTIMIZATION OF COMBINATIONAL LOGIC CIRCUITS. In: Computer Engineering Department, KFUPM.

Fast Fuzzy Force-Directed/Simulated Evolution Metaheuristic for Multiobjective VLSI Cell Placement. In: Department of Computer Engineering, KFUPM.

(2001) Modern Iterative Algorithms and thier Applications in Computer Engineering. In: Book.

EFFICIENT COMBINATIONAL CIRCUITS DESIGN THROUGH FUZZIFIED ANT COLONY OPTIMIZATION ALGORITHM. In: Computer Engineering Department, KFUPM.

Computer Engineering Department Research Profile. In: Computer Engineering Department, KFUPM.

Information Technology Center (ITC) Services and Projects. In: Supporting excellence via technology, KFUPM.

CCSE PAST & PRESENT STANDING. In: College of Computer Sciences & Engineering, King Fahd University of Petroleum & Minerals.

(2003) Iterative Computer Algorithms with Applications in Engineering-Chapter 2: Partitioning. In: College of Computer Sciences & Engineering, King Fahd University of Petroleum & Minerals.

Chapter 1: Introduction to VLSI Physical Design. In: King Fahd University of Petroleum & Minerals.

Automating Your Schedule. In: Special Mini Talk/Demo for 993 Summer, Dhahran, Saudi Arabia.

An Iterative Heuristic for State Justification in Sequential Automatic Test Pattern Generation. In: An Iterative Heuristic for State Justification in, Dhahran, Saudi Arabia.

Area-Time Optimal Adder with Relative Placement Generator. In: Area-Time Optimal Adder with Relative Placement Generator.

Youssef, H. COMPUTER NETWORK. ANALOG AND DIGITAL.

Iterative Computer Algorithms: and their applications in engineering. In: Special Talk for Motorola CAD Group,.

(2004) Efficient Scalable VLSI Architecture for Montgomery Inversion in GF(p). Integration, the VLSI Journal, 37 (2). pp. 103-120. ISSN 0167-9260

(2005) Efficient unified Montgomery inversion with multi-bit shifting. IEE Proceedings Computers and Digital Techniques, 152 (4). pp. 489-498. ISSN 1350-2387

(2006) Merging GF(p) Elliptic Curve Point Adding and Doubling on Pipelined VLSI Cryptographic ASIC Architecture. International Journal of Computer Science and Network Security (IJCSNS), 6 (3A). pp. 44-52. ISSN 1738-7906

(2006) Highly Efficient Elliptic Curve Crypto-Processor with Parallel GF(2m) Field Multipliers. Journal of Computer Science (JCS), 2 (5). pp. 395-400. ISSN 1549-3636

(2006) High Performance Elliptic Curve GF(2m) Crypto-processor. Information Technology Journal (ITJ), 5 (4). pp. 742-748. ISSN 1812-5638

(2006) Fast 160-Bits GF (P) Elliptic Curve Crypto Hardware of High-Radix Scalable Multipliers. International Arab Journal of Information Technology (IAJIT), 3 (4). pp. 342-349. ISSN 1683-3198

(2007) Area Flexible GF(2k) Elliptic Curve Cryptography Coprocessor. International Arab Journal of Information Technology (IAJIT), 4 (1). pp. 1-10.

(2002) New Hardware Algorithms and Designs for Montgomery Modular Inverse Computation in Galois Fields GF(p) and GF(2n). PhD thesis, Oregon State University.

(2007) PARALLEL COMPUTING PLATFORM FOR EVALUATING LDPC CODES PERFORMANCE. IEEE International Conference on Signal Processing and Communications. pp. 157-160.

(2003) Test Vector Decomposition Based Static Compaction Algorithms for Combinational Circuits. ACM Transactions on Design Automation of Electronic Systems, 8 (4). pp. 430-459.

(2003) ON EFFICIENT EXTRACTION OF PARTIALLY SPECIFIED TEST SETS FOR SYNCHRONOUS SEQUENTIAL CIRCUITS. IEEE International Symposium on Circuits and Systems. V-545 -V-548.

(2006) Interconnect-Efficient LDPC Code Design. 18th IEEE Int. Conf. on Microlelectronics. pp. 127-130.

(2007) IMPROVING BER PERFORMANCE OF LDPC CODES BASED ON INTERMEDIATE DECODING RESULTS. IEEE International Conference on Signal Processing and Communications. pp. 1547-1550.

(2003) A Hybrid Test Compression Technique for Efficient Testing of Systems-on-a-Chip. 10th IEEE International Conference on Electronics, Circuits and Systems,. pp. 599-602.

(2002) Extended Frequency-Directed Run-Length Code with Improved Application to System-on-a-Chip Test Data Compression. 9th IEEE International Conference on Electronics, Circuits and Systems. pp. 449-452.

(2007) Efficient Test Compaction for Combinational Circuits Based on Fault Detection Count-Directed Clustering. IET Computers & Digital Techniques, 1 (4). pp. 364-368.

(2006) Efficient Test Compaction for Combinational Circuits Based on Fault Detection Count-Directed Clustering. IEEE Int. Design and Test Workshop.

(1998) A Hardware Model of an Expandable RSA Cryptogrsphic System. Masters thesis, King Fahd University of Petroleum and Minerals (KFUPM).

(2007) High Speed Hardware Architecture to Compute GF(p) Montgomery Inversion with Scalability Features. IET (IEE) Proceedings Computers and Digital Techniques, 1 (4). pp. 389-396. ISSN 1751-861X

(2007) Efficient utilization of scalable multipliers in parallel to compute GF(p) elliptic curve cryptographic operations. Kuwait Journal of Science & Engineering (KJSE), December 2007, 34 (2). pp. 165-182.

(2007) Arabic Diacritics Based Steganography. In: IEEE International Conference on Signal Processing and Communications (ICSPC 2007), 24-27 November 2007, Dubai, UAE.

(2001) An Iterative Heuristic for State Justi�cation in Sequential Automatic Test Pattern Generation. Genetic and Evolutionary Computation Conference (GECCO).

(2001) An Evolutionary Meta-Heuristic for State Justification in Sequential Automatic Test Pattern Generation. International Joint INNS-IEEE Conference on Neural Networks (IJCNN). pp. 767-772.

(2001) An Efficient Test Vector Compression Technique Based on Geometric Shapes. 8th IEEE International Conference on Electronics, Circuits and Systems. pp. 1561-1564.

(2006) An Efficient Test Vector Compression Technique Based on Block Merging. IEEE Int. Symp. on Circuits and Systems. pp. 1447-1450.

(2000) A Parallel Tabu Search Algorithm for VLSI Standard-Cell Placement. In: IEEE International Symposium on Circuits and Systems'', Geneva.

(2000) Fuzzy Simulated Evolution Algorithm for Topology Design on Campus Networks. In: IEEE Congress on Evolutionary Computation, San Diego, USA.

(1999) Fuzzy Simulated Evolution Algorithm for Multiobjective Optimization of VLSI Placement. In: IEEE Congress on Evolutionary Computation, Washington DC.

(2004) An Efficient Test Relaxation Technique for Synchronous Sequential Circuits. IEEE Transactions on Computer Aided Design of Integrated Circuits, 23 (6). pp. 933-940.

(2003) An Efficient Test Relaxation Technique for Synchronous Sequential Circuits. IEEE International Symposium on Circuits and Systems. V-545 -V-548.

(2007) A Reconfigurable Broadcast Scan Compression Scheme Using Relaxation Based Test Vector Decomposition. 16th IEEE Asian Test Symposium. pp. 91-94.

(1995) Timing Influenced General-Cell Genetic Floorplanner. In: Asia and South-Pacific Design Automation Conference, ASP-DAC'95, Japan.

(1995) Timing Influenced Force Directed Floorplanning. In: European Design Automation Conference with Euro-VHDL, Euro-DAC'95, Brighton.

(2001) A Geometric-Primitives-Based Compression Scheme for Testing Systems-on-a-Chip. 19’th IEEE VLSI Test Symposium (VTS). pp. 54-59.

(1995) A Novel Technique for Fast Multiplication. In: IEEE Phoenix Conference on Computers and Communications, IPCCC.

(1995) Timing Driven Genetic Algorithm for Placement. In: IEEE Phoenix Conference on Computers and Communications, IPCCC.

(1995) Performance Driven Standard-cell Placement Using the Genetic Algorithm. In: Fifth Great Lakes Symposium on VLSI, GLSVLSI'95, Buffalo, USA.

(1995) Loop based scheduling for high level synthesis. In: IEEE Phoenix Conference on Computers and Communications, IPCCC.

(1994) Design of a Cell Library for Formal High-level Synthesis. In: IEEE Melecon'94.

(1994) ASIC Design with AHPL. In: IEEE Melecon'94.

(1992) High Level Synthesis of Controllers for Communication Protocols. In: Second Great Lakes Symposium on VLSI, GLSVLSI'92, Kalamazoo.

(1992) VLSI Implementation of Controllers for Communication Protocols from their Petri Net Models. In: IEEE International Symposium on Circuits and Systems, California.

(1991) A State Machine Synthesizer with Weinberger Arrays. In: The IEEE Pacific RIM Conference, Victoria, Canada.

(1989) A Systolic Algorithm for VLSI Design of a Rate Viterbi Decoder. In: IEEE Melecon'89, Portugal.

(1994) GSA: Scheduling and Allocation using Genetic Algorithm. In: European Design Automation Conference with Euro-VHDL, Euro-DAC'94, Grenoble.

(1998) Tabu Search Based Circuit Optimization. In: Great Lakes Symposium on VLSI, GLSVLSI'98, SW Louisiana.

(1998) Performance and Interface Buffer Size Driven Behavioral Partitioning for Embedded Systems. In: 9th International Workshop on Rapid Systems Prototyping, IEEE Computer Society Sponsored, Leuven, Belgium.

(1998) Buffer Size Driven Partitioning for HW/SW Co-Design. In: IEEE International Conference on Computer Design, ICCD'98, Austin, USA.

(1999) A High-Performance Hardware-EÆcient Memory Allocation Technique and Design. In: IEEE International Conference on Computer Design, ICCD'99, Austin, USA.

(2001) Task Matching and Scheduling in Heterogeneous Systems Using Simulated Evolution. In: 10th Heterogeneous Computing Workshop in conjunction with IPDPS 2001, San Francisco.

(2001) Fuzzy Evolutionary Hybrid Metaheuristic for Network Topology Design. In: International Conference on Evolutionary Multi-Criterion Optimization, EMO'01, ETH Zurich, Switzerland (A Springer Publication).

(2001) Adaptive Bias Simulated Evolution Algorithm for Placement. In: IEEE 2001 International Symposium on Circuits and Systems, Sydney, Australia.

(2001) A Fast Constructive Algorithm For Fixed Channel Assignment Problem. In: IEEE 2001 International Symposium on Circuits and Systems, Sydney, Australia.

(2001) Fuzzy Evolutionary Algorithm for VLSI Placement, (Spector, L., E. Goodman, A. Wu, W. B. Langdon, H.-M. Voigt, M. Gen, S. Sen, M. Dorigo, S. Pezeshk, M. Garzon, and E. Burke, editors). In: Proceedings of the Genetic and Evolutionary Computation Conference, GECCO-2001, San Francisco, CA.

(2001) An Evolutionary Algorithm for Network Topology Design. In: International Joint INNS-IEEE Conference on Neural Networks, Washington D.C, USA.

(2001) Fuzzy Simulated Evolution for Power and Performance Optimization of VLSI Placement. In: International Joint INNS-IEEE Conference on Neural Networks, Washington D.C, USA.

(2001) Iterative Heuristics for Multiobjective VLSI Cell Placement. In: International Joint INNS-IEEE Conference on Neural Networks, Washington D.C, USA.

(2001) Fuzzified Iterative Algorithms for Performance Driven Low Power VLSI Placement. In: IEEE International Conference on Computer Design, ICCD'2001, Austin.

(2002) HPTS: Heterogeneous Parallel Tabu Search for VLSI Placement. In: IEEE Congress on Evolutionary Computation'', Honolulu, Hawaii, USA.

(2002) PERFORMANCE AND LOW POWER DRIVEN VLSI STANDARD CELL PLACEMENT USING TABU SEARCH. In: IEEE Congress on Evolutionary Computation'', Honolulu, Hawaii, USA.

(2002) FUZZY AGGREGATING FUNCTIONS FOR MULTIOBJECTIVE VLSI PLACEMENT. In: IEEE International Conference on Fuzzy Systems', Honolulu, Hawaii, USA.

(2002) FUZZY BIASLESS SIMULATED EVOLUTION FOR MULTIOBJECTIVE VLSI PLACEMENT. In: IEEE Congress on Evolutionary Computation'', Honolulu, Hawaii, USA.

(2003) Parallel Tabu Search in a Heterogeneous Environment. In: Proceedings of 17th International Parallel & Distributed Processing Symposium.

(2003) GENERAL ITERATIVE HEURISTICS FOR VLSI MULTIOBJECTIVE PARTITIONING. In: IEEE International Symposium on Circuits and Systems'', Bangkok, Thailand.

(2003) Simulated Evolution Algorithm For Multiobjective VLSI Netlist Bi-Partitioning. In: IEEE International Symposium on Circuits and Systems', Bangkok, Thailand.

(2003) AREA-TIME OPTIMAL ADDER WITH RELATIVE PLACEMENT GENERATOR. In: IEEE International Symposium on Circuits and Systems'', Bangkok, Thailand.

(2003) Reliability and Fault Tolerance based Topological Optimization of Computer Networks - Part I: Enumerative Techniques. In: IEEE Pacific Rim Conference, Victoria, BC, Canada.

(2003) Reliability and Fault Tolerance based Topological Optimization of Computer Networks - Part II: Iterative Techniques. In: EEE Pacific Rim Conference, Victoria, BC, Canada.

(2003) ENHANCING PERFORMANCE OF ITERATIVE HEURISTICS FOR VLSI NETLIST PARTITIONING. In: IEEE International Symposium on Circuits and Systems, Sharjah, UAE.

(2003) Digital Circuit Design Through Simulated Evolution (SimE). In: IEEE Congress on Evolutionary Computation (CEC),, Canberra, Australia.

(2003) A Modified Ant Colony Algorithm for Evolutionary Design of Digital Circuits. In: IEEE Congress on Evolutionary Computation, Canberra, Australia.

(2004) FAST FORCE-DIRECTED/SIMULATED EVOLUTION HYBRID FOR MULTIOBJECTIVE VLSI CELL PLACEMENT. In: IEEE International Symposium on Circuits and Systems (ISCAS), Vancouver, Canada.

(2004) Fuzzified Ant Colony Optimization Algorithm for Efficient Combinational Circuits Synthesis. In: IEEE Congress on Evolutionary Computation (CEC),, Portland Oregon, USA.

(2004) Enhanced Simulated Evolution Algorithm For Digital Circuit Design Yielding Faster Execution in a Larger Solution Space. In: IEEE Congress on Evolutionary Computation (CEC),, Portland, Oregon, USA.

(2005) Multiobjective VLSI Cell Placement using Distributed Genetic Algorithm. In: Genetic and Evolutionary Computation Conference (GECCO-2005), Washington D.C. , USA.

(2005) Efficient Static Compaction Techniques for Sequential Circuits based on Reverse Order Restoration Based and Test Relaxation. In: Proceedings of the 14th Asian Test Symposium (ATS ’05), Kolkata, India.

(2006) An Enhanced Estimator to Multi-objective OSPF WeightSetting Problem. In: Proceedings of 2006 IEEE/IFIP Network Operations & Management Symposium (NOMS 2006),, Vancouver, Canada.

(2006) Asynchronous MMC based Parallel SA Schemes for Multiobjective Standard Cell Placement. In: Proceedings of 2006 International Symposium in Circuits and Systems, pages 4615-4618, (ISCAS 2006), Island of Kos, Greece.

(2006) Finite State Machine State Assignment for Area and Power Minimization. In: Proceedings of 2006 International Symposium in Circuits and Systems, (ISCAS 2006), Island of Kos, Greece.

(2006) A Heuristics Based Approach for Cellular Mobile Network Planning. In: The International Wireless Communications and Mobile Computing Conference (IWCMC06), Vancouver, Canada.

(2007) Message Concealment Techniques using Image based Steganography. In: The 4th IEEE GCC Conference, 11-14 Nov. 2007, Gulf International Convention Centre, Bahrain.

Electrical Engineering

(2003) Variable structure load frequency controller using particle swarm optimization technique. Electronics, Circuits and Systems, 2003. ICECS 2003. Proceedings of the 2003 10th IEEE International conference, 1.

(2002) Harmonic and intermodulation performance of analogue-to-digitalconverters with multibit errors and additive dither. Science, Measurement and Technology, IEE Proceedings -, 149.

(2001) An innovative simulated annealing approach to the long-term hydroscheduling problem. Power Engineering, 2001. LESCOPE '01. 2001 Large Engineering Systems conference, 1.

(1997) A novel pulse-echo technique for medical three-dimensional imaging. Medical Imaging, IEEE Transactions on, 16.

(2001) Efficient time-domain beam-propagation method for modelingintegrated optical devices. Lightwave Technology, Journal of, 19.

Multiobjective Optimal VAR Dispatch Using Strength Pareto Evolutionary Algorithm. Evolutionary Computation, 2006. CEC 2006.IEEE Congress on, 1.

(1994) Induced voltages on fence wires and pipelines by AC powertransmission lines. Industry Applications, IEEE Transactions on, 30.

(1993) Removal of the finite-distance source effect on the Applebaum array. Antennas and Propagation, IEEE Transactions on, 41.

(2002) Applications of SPICE simulation software to the study of reliability and availability in electrical engineering education. Education, IEEE Transactions on, 45.

(0000) ELF Electric and Magnetic Fields Exposure Assessment of Live-Line Workers for 132 kV Transmission Line of SEC. Transmission & Distribution Conference and Exposition: Latin America, 2006. TDC '06. IEEE/PES, 1.

(2000) Robust design of multimachine power system stabilisers using tabusearch algorithm. Generation, Transmission and Distribution, IEE Proceedings-, 147.

(1995) Microcontroller-based phase-angle measurement and correctiontechnique. Industrial Automation and Control: Emerging Technologies, 1995., International IEEE/IAS conference, 1.

(1991) Electromagnetic scattering from a perfectly conducting stripembedded in a dielectric cylinder. Antennas and Propagation Society International Symposium, 1991. AP-S. Digest, 1.

(1994) Self-tuned programmable active-R square wave generator. Instrumentation and Measurement, IEEE Transactions on, 43.

(1999) A simulated annealing algorithm for fuzzy unit commitment problem. Transmission and Distribution Conference, 1999 IEEE, 1.

(2000) Bias field/frequency characteristic of millimeter wavesemiconductor resonators at 77K. Microwave and Millimeter Wave Technology, 2000, 2nd International conference. ICMMT 2000, 1.

(1997) A genetic-based fuzzy logic power system stabilizer formultimachine power systems. Systems, Man, and Cybernetics, 1997. 'Computational Cybernetics and Simulation'., 1997 IEEE International conference, 1.

(2003) Novel exploration of cable insulation materials using electron spin resonance spectroscopy. Electrical Insulation and Dielectric Phenomena, 2003. Annual Report. conference, 1.

(1994) Null steering in adaptive arrays by controlling the elevations ofthe antenna array elements. Antennas and Propagation Society International Symposium, 1994. AP-S. Digest, 2.

(2004) The effect of users' grouping on the convergence behavior of the linear group-wise SIC. TENCON 2004. 2004 IEEE Region 10 Conference, B.

(1997) Simultaneous stabilisation of power systems using geneticalgorithms. Generation, Transmission and Distribution, IEE Proceedings-, 144.

(0000) Union Bounds on the Bit Error Probability of Coded MRC in Nakagami-m Fading. Communications Letters, IEEE, 10.

(2004) A new multimodulus blind equalization algorithm. Networking and Communication, 2004. INCC 204. International conference, 1.

(1993) Microcontroller-based multi-language clock-calendar. Consumer Electronics, IEEE Transactions on, 39.

(1996) Design of linear phase Nyquist filters. Circuits, Devices and Systems, IEE Proceedings -, 143.

(1996) Cutoff wavenumbers of an eccentric dielectric cylinder loading acircular waveguide. Antennas and Propagation Society International Symposium, 1996. AP-S. Digest, 1.

(1998) Harmonic distortion due to output conductance in SI cells. Electronics Letters, 34.

(1998) Application of new reliability assessment framework and value-basedreliability planning. Power System Technology, 1998. Proceedings. POWERCON '98. 1998 International conference, 2.

(1995) Radiation by an axial slot on a dielectric-coated concentricconducting circular cylinder loading a semicircular gap in a groundplane. Antennas and Propagation Society International Symposium, 1995. AP-S. Digest, 1.

(2000) A genetic-based algorithm for fuzzy unit commitment model. Power Engineering Society Summer Meeting, 2000. IEEE, 1.

(1997) The use of EMTP for analyzing a cable terminated transformer undera lightning surge. Energy Conversion Engineering Conference, 1997. IECEC-97., Proceedings of the 32nd Intersociety, 3.

(1996) A microprocessor-based digital wattmeter system design. Energy Conversion Engineering Conference, 1996. IECEC 96. Proceedings of the 31st Intersociety, 3.

(2001) Finite element computation of electric field and charge density ofa pulsed energized electrostatic precipitator. Industry Applications Conference, 2001. Thirty-Sixth IAS Annual Meeting. Conference Record of the 2001 IEEE, 4.

(2001) Downlink channel estimation for IMT-DS. Personal, Indoor and Mobile Radio Communications, 2001 12th IEEE International Symposium on, 2.

(1997) A new current-controlled multiple-output current-conveyor. Circuits and Systems, 1997. ISCAS '97., Proceedings of 1997 IEEE International Symposium on, 2.

(1998) Design and development of an embedded controller for roboticmanipulator. Industry Applications Conference, 1998. Thirty-Third IAS Annual Meeting. The 1998 IEEE, 3.

(2003) Environmental/economic power dispatch using multiobjective evolutionary algorithms: a comparative study. Power Engineering Society General Meeting, 2003, IEEE, 1.

(1999) Performance of ATM networks under hybrid ARQ/FEC error controlscheme. Networking, IEEE/ACM Transactions on, 7.

(2002) Transmission expansion planning using nonlinear programming. Transmission and Distribution Conference and Exhibition 2002: Asia Pacific. IEEE/PES, 1.

(2000) Robust design of multimachine power system stabilizers usingsimulated annealing. Energy Conversion, IEEE Transaction on, 15.

(1994) An on-line neural network-based harmonic analyzer. Circuits and Systems, 1994., Proceedings of the 37th Midwest Symposium on, 1.

(1992) Experimental verification of null steering by element positionperturbations. Antennas and Propagation, IEEE Transactions on, 40.

(2004) The effect of users' grouping on the linear group-wise successive interference cancellation detectors. Communications, Circuits and Systems, 2004. ICCCAS 2004. 2004 International conference, 1.

(0000) A Novel Nonparaxial Time-Domain Beam-Propagation Method for Modeling Ultrashort Pulses in Optical Structures. Lightwave Technology, Journal of, 25.

(1998) Long and short high voltage cable effects on transient overvoltages. Electrical Insulation, 1998. Conference Record of the 1998 IEEE International Symposium on, 1.

(1999) Hybridizing rule-based power system stabilizers with geneticalgorithms. Power Systems, IEEE Transactions on, 14.

(1996) Reliability-throughput: optimisation for adaptive forward errorcorrection systems. Communications, IEE Proceedings-, 143.

(2002) Probabilistic assessment of photovoltaic (PV) generation systems. Power Systems, IEEE Transactions on, 17.

(2001) Observability analysis for state estimation using linearprogramming. Generation, Transmission and Distribution, IEE Proceedings-, 148.

(2004) Large signal analysis of the electroabsorption modulator. Information and Communication Technologies: From Theory to Applications, 2004. Proceedings. 2004 International conference, 1.

(1998) Multiple regression technique for estimating the insulationstrength of series dielectrics on distribution systems: a statisticalapproach. Generation, Transmission and Distribution, IEE Proceedings-, 145.

(1999) Time-domain finite-difference beam propagation method. Photonics Technology Letters, IEEE, 11.

(2001) Particle swarm optimization for multimachine power systemstabilizer design. Power Engineering Society Summer Meeting, 2001. IEEE, 3.

(2000) Convergence behavior of the normalized least mean fourth algorithm. Signals, Systems and Computers, 2000. Conference Record of the Thirty-Fourth Asilomar conference, 1.

(1999) ATM QoS prediction using neural-networks. Neural Information Processing, 1999. Proceedings. ICONIP '99. 6th International conference, 2.

(2003) A new fuzzy logic controller based IPM synchronous motor drive. Electric Machines and Drives Conference, 2003. IEMDC'03. IEEE International, 3.

(2002) Solving the harmonic problems produced from the use of adjustable speed drives in industrial oil pumping field. Power System Technology, 2002. Proceedings. PowerCon 2002. International conference, 1.

(2004) Automation of the Arabic sign language recognition. Information and Communication Technologies: From Theory to Applications, 2004. Proceedings. 2004 International conference, 1.

(1999) Exact calculation of the union bound for the performance of turbocodes over fading channels. Wireless Communications and Networking Conference, 1999. WCNC. 1999 IEEE, 1.

(2007) Dynamic Trajectory Generation for Spatially Constrained Mechanical Systems Using Harmonic Potential Fields. Robotics and Automation, 2007 IEEE International conference, 1.

(2000) A PLC based power factor controller for a 3-phase induction motor. Industry Applications Conference, 2000. Conference Record of the 2000 IEEE, 2.

(1992) Grounded capacitor current-mode oscillator using single currentfollower. Circuits and Systems I: Fundamental Theory and Applications, IEEE Transactions on [see also Circuits and Systems I: Regular Papers, IEEE Transactions on], 39.

(2003) License plate recognition system. Electronics, Circuits and Systems, 2003. ICECS 2003. Proceedings of the 2003 10th IEEE International conference, 2.

(2001) Performance of the multilayer perceptron-based DFE with latticestructure in linear and non-linear channels. Signals, Systems and Computers, 2001. Conference Record of the Thirty-Fifth Asilomar conference, 1.

(1999) Performance analysis of coherent TCM systems with diversityreception in slow Rayleigh fading. Vehicular Technology, IEEE Transactions on, 48.

(2004) A robust damping controller design for a unified power flow controller. Universities Power Engineering Conference, 2004. UPEC 2004. 39th International, 1.

(2004) Successive interference cancellation using stage dependent decision functions. TENCON 2004. 2004 IEEE Region 10 Conference, B.

(2002) Puncturing effects on turbo codes. Communications, IEE Proceedings-, 149.

(1997) Tuning of a fuzzy logic power system stabilizer using geneticalgorithms. Evolutionary Computation, 1997., IEEE International conference, 1.

(1997) A probabilistic characterization of adhesive wear in metals. Reliability, IEEE Transactions on, 46.

(2002) A novel approach for evaluating the performance of SPC productcodes under erasure decoding. Communications, IEEE Transactions on, 50.

(1993) Time domain automatic focusing of an Applebaum array. Antennas and Propagation Society International Symposium, 1993. AP-S. Digest, 1.

(1997) Alternate utility responses for possible risks of lower frequencyelectromagnetic fields. Energy Conversion Engineering Conference, 1997. IECEC-97., Proceedings of the 32nd Intersociety, 1.

(1994) Comments on The single CCII biquads with high-inputimpedance. Circuits and Systems I: Fundamental Theory and Applications, IEEE Transactions on [see also Circuits and Systems I: Regular Papers, IEEE Transactions on], 41.

(2006) Online Development of Digital Logic Design Course. Information and Communication Technologies, 2006. ICTTA '06. 2nd, 1.

(1997) Occupational exposure assessment for power frequencyelectromagnetic fields. Energy Conversion Engineering Conference, 1997. IECEC-97., Proceedings of the 32nd Intersociety, 3.

(2003) An improved HIC using a new ordering and grouping algorithm. Signal Processing and Its Applications, 2003. Proceedings. Seventh International Symposium on, 1.

(2003) A novel multiobjective evolutionary algorithm for optimal reactive power dispatch problem. Electronics, Circuits and Systems, 2003. ICECS 2003. Proceedings of the 2003 10th IEEE International conference, 3.

(2003) Model predictive control of shell benchmark process. Electronics, Circuits and Systems, 2003. ICECS 2003. Proceedings of the 2003 10th IEEE International conference, 2.

(2005) A forward-backward Kalman for the estimation of time-variant channels in OFDM. Signal Processing Advances in Wireless Communications, 2005 IEEE 6th Workshop on, 1.

(1995) A novel single-capacitor single-operational-amplifier sinusoidaloscillator. Education, IEEE Transactions on, 38.

(2003) PC based offline Arabic text recognition system. Signal Processing and Its Applications, 2003. Proceedings. Seventh International Symposium on, 2.

(2000) Bit error rate performance of a generalized diversity selectioncombining scheme in Nakagami fading channels. Wireless Communications and Networking Conference, 2000. WCNC. 2000 IEEE, 3.

(2005) Solid mechanics-inspired sensor-based motion planner. Control Applications, 2005. CCA 2005. Proceedings of 2005 IEEE conference, 1.

(2002) Evasion of multiple, intelligent pursuers in a stationary, cluttered environment: a harmonic potential field approach. Intelligent Control, 2002. Proceedings of the 2002 IEEE International Symposium on, 1.

(1997) Finite element solution of monopolar corona on bundle conductors. Industry Applications Conference, 1997. Thirty-Second IAS Annual Meeting, IAS '97., Conference Record of the 1997 IEEE, 3.

(2001) Nonlinear model predictive control of Hammerstein and Wiener modelsusing genetic algorithms. Control Applications, 2001. (CCA '01). Proceedings of the 2001 IEEE International conference, 1.

(1993) Modeling of magnetization curves for computer-aided design. Magnetics, IEEE Transactions on, 29.

(1999) Integrating genetic algorithms, tabu search, and simulatedannealing for the unit commitment problem. Power Systems, IEEE Transactions on, 14.

(1997) Human-computer interaction of single/three phase transformer designand performance. Industrial and Commercial Power Systems Technical Conference, 1997. Conference Record, Papers Presented at the 1997 Annual Meeting., IEEE 1997, 1.

(2002) Numerical computation of collection efficiency in wire duct electrostatic precipitators. Industry Applications Conference, 2002. 37th IAS Annual Meeting. Conference Record of the, 2.

(2004) Multiobjective optimal power flow using strength Pareto evolutionary algorithm. Universities Power Engineering Conference, 2004. UPEC 2004. 39th International, 1.

(1997) Accurate null steering in linear arrays using tabu search. Antennas and Propagation, Tenth International conference (Conf. Publ. No. 436), 1.

(1991) Null steering in phased arrays by controlling the element positions. Antennas and Propagation, IEEE Transactions on, 39.

(1995) Radio frequency interference by demodulation mechanisms present inbipolar operational amplifiers. Electromagnetic Compatibility, IEEE Transactions on, 37.

(1994) Current mode biquadratic filter realizations employing operationalamplifiers. Electrotechnical Conference, 1994. Proceedings., 7th Mediterranean, 1.

(1992) Calculation of electric stresses in three-core belted cables. Electrical Insulation, Conference Record of the 1992 IEEE International Symposium on, 1.

(1997) Maximum likelihood estimator for fractal dimension of fractalsignal plus noise. Electrical and Computer Engineering, 1997. IEEE 1997 Canadian conference, 1.

(1998) Combined finite element-charge simulation computation of monopolarcorona on bundle wires. Industry Applications Conference, 1998. Thirty-Third IAS Annual Meeting. The 1998 IEEE, 3.

(1999) A translinear current-mode programmable analog exponential function synthesizer. Microelectronics, 1999. ICM '99. The Eleventh International conference, 1.

(1998) Unit commitment by tabu search. Generation, Transmission and Distribution, IEE Proceedings-, 145.

(1997) Predicting the lightning impulse strength of two series dielectricson distribution lines using multiple regression technique. Electrical Insulation and Dielectric Phenomena, 1997. IEEE 1997 Annual Report., conference, 2.

(2006) Analysis and Design of UPFC Damping Stabilizers for Power System Stability Enhancement. Industrial Electronics, 2006 IEEE International Symposium on, 3.

(2006) Multiobjective evolutionary algorithms for electric power dispatch problem. Evolutionary Computation, IEEE Transactions on, 10.

(2002) Optimal design of power-system stabilizers using particle swarm optimization. Energy Conversion, IEEE Transaction on, 17.

(2003) A new reactive power optimization algorithm. Power Tech Conference Proceedings, 2003 IEEE Bologna, 4.

(1993) Scanning properties of superdirective antenna arrays. Antennas and Propagation, 1993., Eighth International conference, 1.

(1998) An experimental measurement of corona discharge using laser Dopplervelocimetry. Electrical Insulation, 1998. Conference Record of the 1998 IEEE International Symposium on, 2.

(2003) A linear group polynomial-expansion successive interference cancellation detector. Personal, Indoor and Mobile Radio Communications, 2003. PIMRC 2003. 14th IEEE Proceedings on, 2.

(2003) Effects of electrode spacing on the response of optically controlled MESFETs. Numerical Simulation of Semiconductor Optoelectronic Devices, 2003. NUSOD 2003. Proceedings of the IEEE/LEOS 3rd International conference, 1.

(1995) Electromagnetic scattering from a coaxial dielectric circularcylinder loading a semicircular gap in a ground plane. Microwave Theory and Techniques, IEEE Transactions on, 43.

(2003) Tracking analysis of the NLMS algorithm in the presence of both random and cyclic nonstationarities. Signal Processing Letters, IEEE, 10.

(1995) A programmable SCR-based AC voltage regulator. Industrial Automation and Control: Emerging Technologies, 1995., International IEEE/IAS conference, 1.

(2000) Adaptive seismic compression by wavelet shrinkage. Statistical Signal and Array Processing, 2000. Proceedings of the Tenth IEEE Workshop on, 1.

(1999) Corona power loss on bundled conductors: experimental andcomputational results. Industry Applications, IEEE Transactions on, 35.

(1999) A general expression for the capacity of slotted ALOHA underNakagami fading. Wireless Communications and Networking Conference, 1999. WCNC. 1999 IEEE, 1.

(1997) Optical recognition of electrical circuit drawings. Communications, Computers and Signal Processing, 1997. '10 Years PACRIM 1987-1997 - Networking the Pacific Rim'. 1997 IEEE Pacific Rim conference, 2.

(1996) Radiation by axial slots on a dielectric-coated nonconfocalconducting elliptic cylinder. Microwaves, Antennas and Propagation, IEE Proceedings -, 143.

(2006) Path-loss and time dispersion parameters for indoor UWB propagation. Wireless Communications, IEEE Transactions on, 5.

(1996) Modified two-level state estimation approach [for power systems]. Generation, Transmission and Distribution, IEE Proceedings-, 143.

(2006) Agile, Steady Response of Inertial, Constrained Holonomic Robots Using Nonlinear, Anisotropic Dampening Forces. Decision and Control, 2006 45th IEEE conference, 1.

(1996) Cascadable current-mode filters using single FTFN. Electronics Letters, 32.

(1991) Automated processing of quad array data. Signal Processing, IEEE Transactions on [see also Acoustics, Speech, and Signal Processing, IEEE Transactions on], 39.

(1998) Radiation characteristics of an infinite dielectric-coated axiallyslotted cylindrical antenna partly embedded in a ground plane. Antennas and Propagation, IEEE Transactions on, 46.

(2003) New realizations of CMOS current controlled conveyors with variable current gain and negative input resistance. Circuits and Systems, 2003. MWSCAS '03. Proceedings of the 46th IEEE International Midwest Symposium on, 1.

(1993) Design of adaptive arrays based on element position perturbations. Antennas and Propagation, 1993., Eighth International conference, 1.

(1998) Improved calculation of finite-element analysis of bipolar coronaincluding ion diffusion. Industry Applications, IEEE Transactions on, 34.

(1994) Digitally programmable grounded capacitor oscillators usingoperational amplifier poles. Electrotechnical Conference, 1994. Proceedings., 7th Mediterranean, 1.

(1999) Parameterization and compensation of friction forces using geneticalgorithms. Industry Applications Conference, 1999. Thirty-Fourth IAS Annual Meeting. Conference Record of the 1999 IEEE, 1.

(1989) Design of superdirective endfire antenna arrays. Antennas and Propagation, IEEE Transactions on, 37.

(2003) Closed loop identification with model predictive control: a case study. SICE 2003 Annual Conference, 1.

(1997) I-Q TCM: reliable communication over the Rayleigh fading channelclose to the cutoff rate. Information Theory, IEEE Transactions on, 43.

(1997) Universal three input and one output current-mode filter withoutexternal passive elements. Electronics Letters, 33.

(2006) Design of PSS and STATCOM-based damping stabilizers using genetic algorithms. Power Engineering Society General Meeting, 2006. IEEE, 1.

(2004) Error probability of coded multi-antenna systems in block fading environments. Communications, 2004 IEEE International conference, 2.

(2003) Capacitor placement in distribution systems, a new formulation. Power Tech Conference Proceedings, 2003 IEEE Bologna, 4.

(2002) A variable weight mixed-norm adaptive algorithm. Acoustics, Speech, and Signal Processing, 2002. Proceedings. (ICASSP '02). IEEE International conference, 2.

(1999) Decision feedback equalisation of coded I-Q QPSK in mobile radioenvironments. Electronics Letters, 35.

(1999) An optimized fast voltage stability indicator. Electric Power Engineering, 1999. PowerTech Budapest 99. International conference, 1.

(1997) A robust controller for DC-DC switched mode power converters. Industry Applications Conference, 1997. Thirty-Second IAS Annual Meeting, IAS '97., Conference Record of the 1997 IEEE, 2.

(2002) A simulated annealing-based optimal controller for a three phase induction motor. Power System Technology, 2002. Proceedings. PowerCon 2002. International conference, 2.

(1997) A new simulated annealing-based tabu search algorithm for unitcommitment. Systems, Man, and Cybernetics, 1997. 'Computational Cybernetics and Simulation'., 1997 IEEE International conference, 3.

(1997) A fuzzy basis function network for generator excitation control. Fuzzy Systems, 1997., Proceedings of the Sixth IEEE International conference, 3.

(2004) Fully differential second-order filter. Circuits and Systems, 2004. MWSCAS '04. The 2004 47th Midwest Symposium on, 3.

(1997) On the analysis of lightning surges arriving to cable terminatedtransformer using (EMTP). Industry Applications Conference, 1997. Thirty-Second IAS Annual Meeting, IAS '97., Conference Record of the 1997 IEEE, 3.

(2006) Error probability of coded STBC systems in block fading environments. Wireless Communications, IEEE Transactions on, 5.

(1994) Demodulation radio frequency interference in bipolar operationalamplifiers. Electromagnetic Compatibility, 1994. Ninth International conference (Conf. Publ. No. 396), 1.

(2001) Diagnosing failed distribution transformers using neural networks. Power Delivery, IEEE Transactions on, 16.

(1997) Multichannel image identification and restoration using continuousspatial domain modeling. Image Processing, 1997. Proceedings., International conference, 2.

(2004) Modified algorithm for hard decision decoding of product codes. Wireless Communications and Networking Conference, 2004. WCNC. 2004 IEEE, 3.

(1993) Analysis of monopolar ionized field as influenced by ion diffusion. Industry Applications Society Annual Meeting, 1993., Conference Record of the 1993 IEEE, 1.

(0000) Fork-Coupled Resonators for High-Frequency Characterization of Dielectric Substrate Materials. Instrumentation and Measurement, IEEE Transactions on, 55.

(1994) A novel sinusoidal frequency divider. Instrumentation and Measurement, IEEE Transactions on, 43.

(2006) Performance analysis and iterative decoding of I-Q trellis space-time codes. Communications, IEE Proceedings-, 153.

(2004) Soft constraint satisfaction multimodulus blind equalization algorithms. Acoustics, Speech, and Signal Processing, 2004. Proceedings. (ICASSP '04). IEEE International conference, 2.

(2000) Analysis of a nonconfocal suspended strip in an ellipticalcylindrical waveguide. Microwave Theory and Techniques, IEEE Transactions on, 48.

(1998) A maximum likelihood estimate for two-variable fractal surface. Image Processing, IEEE Transactions on, 7.

(1992) Induced voltages on fence wires and pipe lines by AC powertransmission lines. Industry Applications Society Annual Meeting, 1992., Conference Record of the 1992 IEEE, 1.

(2003) Optimal multiobjective design of robust power system stabilizers using genetic algorithms. Power Systems, IEEE Transactions on, 18.

(1996) A novel method for predicting critical flashover (CFO) voltagesinsulation strength of multiple dielectrics on distribution overheadlines. Electrical Insulation, 1996., Conference Record of the 1996 IEEE International Symposium on, 1.

(1994) New current mode biquadratic active filters employing currentdifference amplifiers. Electrotechnical Conference, 1994. Proceedings., 7th Mediterranean, 1.

(2001) A robust STATCOM controller for power system dynamic performanceenhancement. Power Engineering Society Summer Meeting, 2001. IEEE, 2.

(2003) Coordinated design of robust excitation and TCSC-based damping controllers. Power Engineering Society General Meeting, 2003, IEEE, 3.

(1995) Tuning of AGC of interconnected reheat thermal systems with geneticalgorithms. Systems, Man and Cybernetics, 1995. Intelligent Systems for the 21st Century., IEEE International conference, 3.

(1995) Radiation characteristic of slots on conducting circular cylindercovered by eccentric dielectric cylinder. Microwaves, Antennas and Propagation, IEE Proceedings -, 142.

(1992) Subsystem interconnection and near optimum control of discretebalanced systems. Automatic Control, IEEE Transactions on, 37.

(1997) Radiation from an open ended eccentric annular waveguide. Antennas and Propagation Society International Symposium, 1997. IEEE., 1997 Digest, 1.

(2006) Simultaneous design of damping controllers and internal controllers of a unified power flow controller. Power Engineering Society General Meeting, 2006. IEEE, 1.

(2005) Application of particle swarm optimization algorithm to multiuser detection in CDMA. Personal, Indoor and Mobile Radio Communications, 2005. PIMRC 2005. IEEE 16th International Symposium on, 4.

(1996) Improved calculation of finite element analysis of bipolar coronaincluding ion diffusion. Industry Applications Conference, 1996. Thirty-First IAS Annual Meeting, IAS '96., Conference Record of the 1996 IEEE, 4.

(1997) Estimating the insulation strength of two series non-ceramicdielectrics on distribution systems: a statistical approach. Electrical Insulation Conference, 1997, and Electrical Manufacturing & Coil Winding Conference. Proceedings, 1.

(2005) Robust human face detection in complex color images. Image Processing, 2005. ICIP 2005. IEEE International conference, 2.

(1996) Novel RC oscillators using the current-feedback operationalamplifier. Circuits and Systems I: Fundamental Theory and Applications, IEEE Transactions on [see also Circuits and Systems I: Regular Papers, IEEE Transactions on], 43.

(1998) Air terminations for lightning protection of structures. Electrical Insulation and Dielectric Phenomena, 1998. Annual Report. conference, 1.

(2005) Bit error probability of bit-interleaved coded modulation (BICM) in wireless environments. Information Theory, 2005. ISIT 2005. Proceedings. International Symposium on, 1.

(2001) Robust design of electrical power-based stabilizers using tabusearch. Power Engineering Society Summer Meeting, 2001. IEEE, 3.

(2000) Steady flow measurements in a vaneless diffuser. Energy Conversion Engineering Conference and Exhibit, 2000. (IECEC) 35th Intersociety, 2.

(1998) A simulated annealing algorithm for unit commitment. Power Systems, IEEE Transactions on, 13.

(0000) Decentralized Self-Organizing Potential Field-Based Control for Individually Motivated Mobile Agents in a Cluttered Environment: A Vector-Harmonic Potential Field Approach. Systems, Man and Cybernetics, Part A, IEEE Transactions on, 37.

(2004) Performance of wireless OFDM system channel estimation with different pilot patterns. Spread Spectrum Techniques and Applications, 2004 IEEE Eighth International Symposium on, 1.

(2004) Wideband audio compression using wrapped linear prediction and the discrete wavelet transform. Circuits and Systems, 2004. ISCAS '04. Proceedings of the 2004 International Symposium on, 3.

(1995) Economic load dispatch multiobjective optimization procedures usinglinear programming techniques. Power Systems, IEEE Transactions on, 10.

(1999) Harmonic signals in Saudi Arabia industrial plants. Power Engineering Society 1999 Winter Meeting, IEEE, 2.

(1992) Improved approximate analytical solution for generalised diodeequation. Electronics Letters, 28.

(1998) A new variable structure DC motor controller using geneticalgorithms. Industry Applications Conference, 1998. Thirty-Third IAS Annual Meeting. The 1998 IEEE, 3.

(1996) Use of multilayer feedforward neural networks in identification andcontrol of Wiener model. Control Theory and Applications, IEE Proceedings -, 143.

(1998) Voltage stability estimation and prediction using neural network. Power System Technology, 1998. Proceedings. POWERCON '98. 1998 International conference, 2.

(1995) Harmonic and intermodulation performance of linear delta modulators. Instrumentation and Measurement, IEEE Transactions on, 44.

(2004) Performance analysis of finite-users finite-buffer slotted ALOHA system in flat fading channel using tagged user approach. TENCON 2004. 2004 IEEE Region 10 Conference, C.

(2004) Application of tagged user approach to analyze finite-users finite-buffer slotted ALOHA system in flat fading capture channel. Multitopic Conference, 2004. Proceedings of INMIC 2004. 8th International, 1.

(1996) A compound near-far end least square-fourth error minimization foradaptive echo cancellation. Signals, Systems and Computers, 1996. 1996 Conference Record of the Thirtieth Asilomar conference, 1.

(1997) Radial basis function network based power system stabilizers formultimachine power systems. Neural Networks,1997., International conference, 2.

(2000) Evaluation of transfer functions for punctured turbo codes. Electronics Letters, 36.

(0000) Scan Test Cost and Power Reduction Through Systematic Scan Reconfiguration. Computer-Aided Design of Integrated Circuits and Systems, IEEE Transactions on, 26.

(2003) AGC tuning of interconnected reheat thermal systems with particle swarm optimization. Electronics, Circuits and Systems, 2003. ICECS 2003. Proceedings of the 2003 10th IEEE International conference, 1.

(2001) Mobile radio channel impulse response: measurements and interpretations. Multi Topic Conference, 2001. IEEE INMIC 2001. Technology for the 21st Century. Proceedings. IEEE International, 1.

(2001) A new multiobjective evolutionary algorithm forenvironmental/economic power dispatch. Power Engineering Society Summer Meeting, 2001. IEEE, 2.

(1999) Thyristor controlled phase shifter based stabilizer design usingsimulated annealing algorithm. Electric Power Engineering, 1999. PowerTech Budapest 99. International conference, 1.

(1995) Chaos in an autonomous active-R circuit. Circuits and Systems I: Fundamental Theory and Applications, IEEE Transactions on [see also Circuits and Systems I: Regular Papers, IEEE Transactions on], 42.

(1995) Genetic algorithms applications in load frequency control. Genetic Algorithms in Engineering Systems: Innovations and Applications, 1995. GALESIA. First International conference (Conf. Publ. No. 414), 1.

(1999) Sequence MAP decoding of trellis codes for Gaussian and Rayleighchannels. Vehicular Technology, IEEE Transactions on, 48.

(2000) Space-time coded QPSK for rapid fading channels. Personal, Indoor and Mobile Radio Communications, 2000. PIMRC 2000. The 11th IEEE International Symposium on, 1.

(2001) Uplink channel estimation for IMT-DS system. Vehicular Technology Conference, 2001. VTC 2001 Fall. IEEE VTS 54th, 4.

(1998) Comment on Floating inductance simulation based on currentconveyors. Electronics Letters, 34.

(2000) A decoding algorithm for I-Q space-time coded systems in fadingenvironments. Vehicular Technology Conference, 2000. IEEE VTS-Fall VTC 2000. 52nd, 1.

(2003) Pspice double void partial discharge simulation and detection using wavelet. Electrical Insulation and Dielectric Phenomena, 2003. Annual Report. conference, 1.

(1999) Capacity of slotted ALOHA under Nakagami fading with near-far andshadowing effects. Electronics Letters, 35.

(2003) Analysis of the effect of radio frequency interference on the DC performance of CMOS operational amplifiers. Electromagnetic Compatibility, 2003. EMC '03. 2003 IEEE International Symposium on, 1.

(1992) Minimal realisation for single resistor controlled sinusoidaloscillator using single CCII. Electronics Letters, 28.

(2003) Microwave performance of optically controlled MESFETs. Electronics, Circuits and Systems, 2003. ICECS 2003. Proceedings of the 2003 10th IEEE International conference, 3.

(1996) Novel CCI-based single-element-controlled oscillators employinggrounded resistors and capacitors. Circuits and Systems I: Fundamental Theory and Applications, IEEE Transactions on [see also Circuits and Systems I: Regular Papers, IEEE Transactions on], 43.

(2003) Analysis of the effect of radio frequency interference on the DC performance of bipolar operational amplifiers. Electromagnetic Compatibility, IEEE Transactions on, 45.

(1996) Adaptive finite-element ballooning analysis of bipolar ionizedfields. Industry Applications, IEEE Transactions on, 32.

(0000) An EM-Based Forward-Backward Kalman Filter for the Estimation of Time-Variant Channels in OFDM. Signal Processing, IEEE Transactions on [see also Acoustics, Speech, and Signal Processing, IEEE Transactions on], 55.

(1997) Adaptive binary coding for diversity communication systems. Personal Wireless Communications, 1997 IEEE International conference, 1.

(1999) Genetic-based TCSC damping controller design for power systemstability enhancement. Electric Power Engineering, 1999. PowerTech Budapest 99. International conference, 1.

(1998) On the error probability of convolutionally encoded spread spectrumBPSK in frequency selective Rayleigh fading. Information Theory, 1998. Proceedings. 1998 IEEE International Symposium on, 1.

(1988) Model reduction via balanced realizations: an extension andfrequency weighting techniques. Automatic Control, IEEE Transactions on, 33.

(2003) Power system stability enhancement via coordinated design of a PSS and an SVC-based controller. Electronics, Circuits and Systems, 2003. ICECS 2003. Proceedings of the 2003 10th IEEE International conference, 2.

(1997) A new genetic algorithm approach for unit commitment. Genetic Algorithms in Engineering Systems: Innovations and Applications, 1997. GALESIA 97. Second International Conference On (Conf. Publ. No. 446), 1.

(2003) Evasion of multiple, intelligent pursuers in a stationary, cluttered environment using a Poisson potential field. Robotics and Automation, 2003. Proceedings. ICRA '03. IEEE International conference, 3.

(1996) Finite element solution of monopolar corona as influenced by ionlife time. Industry Applications Conference, 1996. Thirty-First IAS Annual Meeting, IAS '96., Conference Record of the 1996 IEEE, 4.

(2002) Harmonic flow study and evaluation of a petrochemical plant in Saudi Arabia. Power Engineering 2002 Large Engineering Systems conference, LESCOPE 02, 1.

(1990) Design and simulation of superdirective adaptive antenna arrays. Antennas and Propagation Society International Symposium, 1990. AP-S. Merging Technologies for the 90's. Digest., 1.

(2000) A tight bound on the error probability of space-time codes forrapid fading channels. Wireless Communications and Networking Conference, 2000. WCNC. 2000 IEEE, 3.

(1999) Finite element analysis of corona in wire-duct electrostaticprecipitators. Industry Applications Conference, 1999. Thirty-Fourth IAS Annual Meeting. Conference Record of the 1999 IEEE, 1.

(1993) Scattering by a dielectric coated conducting cylinder loading asemicircular channel in a ground plane. Antennas and Propagation Society International Symposium, 1993. AP-S. Digest, 1.

(2002) Optimal design of power system stabilizers using evolutionary programming. Energy Conversion, IEEE Transaction on, 17.

(1997) Control of nonlinear dynamical systems using genetic algorithms. Intelligent Control, 1997. Proceedings of the 1997 IEEE International Symposium on, 1.

(2003) Tracking analysis of normalized adaptive algorithms. Acoustics, Speech, and Signal Processing, 2003. Proceedings. (ICASSP '03). 2003 IEEE International conference, 6.

(1997) On-line identification of synchronous machines using radial basisfunction neural networks. Power Systems, IEEE Transactions on, 12.

(2001) Spectrum of a nonlinearly quantised equal-amplitude dual-tonesignal. Circuits, Devices and Systems, IEE Proceedings -, 148.

(1998) A hybrid neuro-fuzzy power system stabilizer for multimachine powersystems. Power Systems, IEEE Transactions on, 13.

(1996) Inception voltage of corona in bipolar ionized fields-effect oncorona power loss. Industry Applications Conference, 1996. Thirty-First IAS Annual Meeting, IAS '96., Conference Record of the 1996 IEEE, 4.

(2005) A supportive approach into life testing and characterization of PVC and XLPE-insulated cable materials. Electrical Insulation and Dielectric Phenomena, 2005. CEIDP '05. 2005 Annual Report conference, 1.

(1997) Estimation of lightning impulse insulation strength of two seriesdielectrics using the least square technique. Electrical Insulation Magazine, IEEE, 13.

(1994) Carrier and intermodulation performance of limiters excited bymulticarriers. Aerospace and Electronic Systems, IEEE Transactions on, 30.

(2004) Voltage dip assessment using ESKOM criterion. Power Engineering, 2004. LESCOPE-04. 2004 Large Engineering systems conference, 1.

(1999) Finite-element solution of monopolar corona on bundle conductors. Industry Applications, IEEE Transactions on, 35.

(2002) Corona power loss, electric field, and current density profiles in bundled horizontal and vertical bipolar conductors. Industry Applications, IEEE Transactions on, 38.

(1999) Simultaneous stabilization of multimachine power systems viagenetic algorithms. Power Systems, IEEE Transactions on, 14.

(2005) Large signal performance of micromachined silicon inductive microphones. Industrial Technology, 2005. ICIT 2005. IEEE International conference, 1.

(1996) Capacity of slotted ALOHA in generalised fading environments. Electronics Letters, 32.

(2003) Environmental/economic power dispatch using multiobjective evolutionary algorithms. Power Systems, IEEE Transactions on, 18.

(1994) Simple method for calculating Fourier coefficients ofexperimentally obtained waveforms. Science, Measurement and Technology, IEE Proceedings -, 141.

(2002) A combined algorithm based on finite elements and a modified methodof characteristics for the analysis of the corona in wire-ductelectrostatic precipitators. Industry Applications, IEEE Transactions on, 38.

(2003) Reliability assessment of an industrial city transmission system in Saudi Arabia. Industrial and Commercial Power Systems, 2003. 2003 IEEE Technical Conference, 1.

(1997) Interfacial breakdown on contaminated electrolytic surfaces. Electrical Insulation Conference, 1997, and Electrical Manufacturing & Coil Winding Conference. Proceedings, 1.

(1998) Contingency analysis of bulk power system using neural networks. Power System Technology, 1998. Proceedings. POWERCON '98. 1998 International conference, 2.

(1997) Channel throughput of slotted ALOHA in a Nakagami fadingenvironment. Communications, 1997. ICC 97 Montreal, 'Towards the Knowledge Millennium'. 1997 IEEE International conference, 2.

(2003) An approach to offline Arabic character recognition using neural networks. Electronics, Circuits and Systems, 2003. ICECS 2003. Proceedings of the 2003 10th IEEE International conference, 3.

(2003) Evasion of well-informed, intelligent pursuers in a stationary clutter. American Control Conference, 2003. Proceedings of the 2003, 3.

(2003) Prediction of passive intermodulation arising from corrosion. Science, Measurement and Technology, IEE Proceedings -, 150.

(2004) ORAN: a basis for an Arabic OCR system. Intelligent Multimedia, Video and Speech Processing, 2004. Proceedings of 2004 International Symposium on, 1.

(2002) A new tabu search algorithm for the long-term hydro scheduling problem. Power Engineering 2002 Large Engineering Systems conference, LESCOPE 02, 1.

(1998) Flashover due to lightning of composite insulators used ondistribution line. Electrical Insulation, 1998. Conference Record of the 1998 IEEE International Symposium on, 2.

(2000) Corona power loss computation in bundled bipolar conductors. Industry Applications Conference, 2000. Conference Record of the 2000 IEEE, 2.

(2004) A new method to combat with frequency offsets in wireless OFDM systems. TENCON 2004. 2004 IEEE Region 10 Conference, B.

(2005) Predicted performance of magnetized semiconductor phase shifters for millimeter-wave microstrip array antennas. Microwave and Wireless Components Letters, IEEE, 15.

(1999) Neural network-based decision feedback equaliser with latticestructure. Electronics Letters, 35.

(2002) Recursive least-squares backpropagation algorithm for stop-and-go decision-directed blind equalization. Neural Networks, IEEE Transactions on, 13.

(2000) A time-domain algorithm for the analysis of second-harmonicgeneration in nonlinear optical structures. Photonics Technology Letters, IEEE, 12.

(2005) A union bound on the error probability of binary codes over block-fading channels. Vehicular Technology, IEEE Transactions on, 54.

(1999) Current-mode sinusoidal oscillators using single FTFN. Circuits and Systems II: Analog and Digital Signal Processing, IEEE Transactions on [see also Circuits and Systems II: Express Briefs, IEEE Transactions on], 46.

(2002) Analog low-voltage current-mode implementation of digital logic gates. Circuits and Systems, 2002. APCCAS '02. 2002 Asia-Pacific conference, 1.

(2005) A translinear circuit for sinusoidal frequency division. Instrumentation and Measurement, IEEE Transactions on, 54.

(1992) New current-mode active filters employing first generation currentconveyor. Circuits and Systems, 1992., Proceedings of the 35th Midwest Symposium on, 1.

(1993) Combined method based on inversion and charge simulation forcalculating electric stresses in three-core belted cables. Generation, Transmission and Distribution [see also IEE Proceedings-Generation, Transmission and Distribution], IEE Proceedings C, 140.

(1993) Performance of TCM systems with outer codes overfrequency-selective slowly-fading channels. Networks, 1993. International conference Information Engineering '93. 'Communications and Networks for the Year 2000', Proceedings of IEEE Singapore International conference, 2.

(1999) Blocking and desensitization in bipolar and MOSFET differentialamplifiers. Electromagnetic Compatibility, IEEE Transactions on, 41.

(2006) Comment: Nonlinear SNR amplification of harmonic signal in noise. Electronics Letters, 42.

(1993) Trellis coded modulation with outer RS codes for communication overRayleigh fading channels. Networks, 1993. International conference Information Engineering '93. 'Communications and Networks for the Year 2000', Proceedings of IEEE Singapore International conference, 2.

(1991) An adaptive error control system using hybrid ARQ schemes. Communications, IEEE Transactions on, 39.

(1992) Large signal analysis of optical directional coupler modulators. Microwave Theory and Techniques, IEEE Transactions on, 40.

(2003) Competitive learning/reflected residual vector quantization for coding angiogram images. Image Processing, 2003. ICIP 2003. Proceedings. 2003 International conference, 1.

(1995) Modeling second-order nonlinear effects in optical waveguides usinga parallel-processing beam propagation method. Quantum Electronics, IEEE Journal of, 31.

(2002) Robust damping controller design for a static compensator. Generation, Transmission and Distribution, IEE Proceedings-, 149.

(1991) AI technique for load flow planning and contingency analysis. Electrotechnical Conference, 1991. Proceedings., 6th Mediterranean, 1.

(1993) Effect of bit-threshold errors on the harmonic and intermodulationperformance of successive approximation A/D converters. Communications, IEEE Transactions on, 41.

(2006) CMOS Digitally Programmable Inductance. Microelectronics, 2006. ICM '06. International conference, 1.

(1999) Radial basis function networks for contingency analysis of bulkpower systems. Power Systems, IEEE Transactions on, 14.

(2003) Warped ARMA filters in high quality audio coding. Signal Processing and Its Applications, 2003. Proceedings. Seventh International Symposium on, 2.

(1997) Cutoff frequencies of circular waveguide loaded with eccentricdielectric cylinder. Microwaves, Antennas and Propagation, IEE Proceedings -, 144.

(2000) Convergence analysis of the variable weight mixed-norm LMS-LMFadaptive algorithm. Signals, Systems and Computers, 2000. Conference Record of the Thirty-Fourth Asilomar conference, 1.

(2000) Adaptive variable structure controller using neural networks. Industry Applications Conference, 2000. Conference Record of the 2000 IEEE, 2.

(1995) A finite-element analysis of bipolar ionized field. Industry Applications, IEEE Transactions on, 31.

(2000) Performance of equalized I-Q 16-QAM in frequency selective fading. Personal, Indoor and Mobile Radio Communications, 2000. PIMRC 2000. The 11th IEEE International Symposium on, 1.

(2005) Challenges of Using Partial Discharge Measurements for Predictive Maintenance. Transmission and Distribution Conference and Exhibition: Asia and Pacific, 2005 IEEE/PES, 1.

(0000) Application of Heuristic Algorithms for Multiuser Detection. Communications, 2006. ICC '06. IEEE International conference, 7.

(2003) Escaping capture by multiple, intelligent, well-informed, cooperative pursuers amidst stationary clutter. Decision and Control, 2003. Proceedings. 42nd IEEE conference, 3.

(2004) Effect of Doppler frequency on pilot arrangements in wireless OFDM systems. Information and Communication Technologies: From Theory to Applications, 2004. Proceedings. 2004 International conference, 1.

(2000) Robust tuning of power system stabilizers in multimachine powersystems. Power Engineering Society Winter Meeting, 2000. IEEE, 2.

(1998) A genetic approach to the selection of the variable structurecontroller feedback gains. Control Applications, 1998. Proceedings of the 1998 IEEE International conference, 1.

(1997) Prediction of reliability of broadcasting transmitter systems. Broadcasting, IEEE Transactions on, 43.

(2001) Multilayer perceptron-based DFE with lattice structure. Neural Networks, IEEE Transactions on, 12.

(1997) Three-dimensional imaging using a new synthetic aperture focusingtechnique. Ultrasonics, Ferroelectrics and Frequency Control, IEEE Transactions on, 44.

(2002) Water trees diagnostic of extruded underground cables: a case study in Saudi Arabia eastern province. Transmission and Distribution Conference and Exhibition 2002: Asia Pacific. IEEE/PES, 2.

(1999) Performance of equalized I-Q QPSK over 2-ray Rayleigh fading. Signals, Systems, and Computers, 1999. Conference Record of the Thirty-Third Asilomar conference, 1.

(2006) A new ordering and grouping algorithm for the linear weighted group matched filter successive interference cancellation detector. Vehicular Technology, IEEE Transactions on, 55.

(2004) A new linear hybrid multiuser detector for CDMA systems. Personal, Indoor and Mobile Radio Communications, 2004. PIMRC 2004. 15th IEEE International Symposium on, 2.

(1998) Corona wind velocity: parametric approach. Electrical Insulation and Dielectric Phenomena, 1998. Annual Report. conference, 1.

(1996) An improved analysis of an optoelectronic mixer based onmetal-semiconductor-metal photodetector. Millimeter Wave and Far Infrared Science and Technology, 1996. Proceedings. 4th International conference, 1.

(1998) Neural servocontroller for nonlinear MIMO plant. Control Theory and Applications, IEE Proceedings -, 145.

(2005) A Hybrid, PDE-ODE Controller for Intercepting an Intelligent, Well-informed Target in a Stationary, Cluttered Environment. Decision and Control, 2005 and 2005 European Control Conference. CDC-ECC '05. 44th IEEE conference, 1.

(1997) Visualization of partial discharge burning voltage mechanism oncontaminated surfaces. Electrical Insulation and Dielectric Phenomena, 1997. IEEE 1997 Annual Report., conference, 1.

(2006) Frequency Independent Phase Shifter. Microelectronics, 2006. ICM '06. International conference, 1.

(2005) Solving the Narrow Corridor Problem in Potential Field-Guided Autonomous Robots. Robotics and Automation, 2005. ICRA 2005. Proceedings of the 2005 IEEE International conference, 1.

(2006) Performance Analysis of Coded Cooperation Diversity in Wireless Networks. Communications, 2006. ICC '06. IEEE International conference, 10.

(1993) A universal finite-element analysis of the bipolar ionized field. Industry Applications Society Annual Meeting, 1993., Conference Record of the 1993 IEEE, 1.

(2000) Distribution transformers reliability; industrial plant in SaudiArabia. Power Engineering Society Winter Meeting, 2000. IEEE, 4.

(2001) Performance of coherent schemes with generalized selectioncombining in Rayleigh fading. Personal, Indoor and Mobile Radio Communications, 2001 12th IEEE International Symposium on, 1.

(2006) Performance Analysis of Bit-Interleaved Space-Time (BI-ST) Coded Systems Over Wireless Channels. Communications, 2006. ICC '06. IEEE International conference, 3.

(2004) Performance of punctured space-time codes over wireless channels and their applications. Masters thesis, King Fahd University of Petroleum and Minerals.

(2004) A Pose invariant face recognition system using subspace techniques. Masters thesis, King Fahd University of Petroleum and Minerals.

(2005) Design of microstrip linear phased array antenna using integrated array feeder. Masters thesis, King Fahd University of Petroleum and Minerals.

(2004) Pade approximants technique for the analysis of waveguide junctions and beam splitters. Masters thesis, King Fahd University of Petroleum and Minerals.

(2004) A new blind equalization scheme using the principle of minimal disturbance. Masters thesis, King Fahd University of Petroleum and Minerals.

(2005) Code acquisition in DS-CDMA systems optimization and DSP implementation. Masters thesis, King Fahd University of Petroleum and Minerals.

(2006) Impact of variability of Nakagami-m parameter on the performance of digital communication systems. Masters thesis, King Fahd University of Petroleum and Minerals.

(2006) Optimization of ideal reactive distillation column using hybrid PSO algorithm. Masters thesis, King Fahd University of Petroleum and Minerals.

(2005) Facts-based stabilizers for power system stability enhancement. Masters thesis, King Fahd University of Petroleum and Minerals.

(2004) Arabic sign language recognition using an instrumented glove. Masters thesis, King Fahd University of Petroleum and Minerals.

(2004) Configurable analog building blocks for field programmable analog arrays. PhD thesis, King Fahd University of Petroleum and Minerals.

(2005) Damping enhancement of multimachine power system through STATCOM control. Masters thesis, King Fahd University of Petroleum and Minerals.

(2003) Environmental impact on residential load modeling. Masters thesis, King Fahd University of Petroleum and Minerals.

(2004) CMOS bandpass filters for low-IF Bluetooth receiver. Masters thesis, King Fahd University of Petroleum and Minerals.

(2005) Design and implementation of all-digital CDMA code tracking loops. Masters thesis, King Fahd University of Petroleum and Minerals.

(2006) Playout scheduling technique based on normalized least mean square (NLMS) algorithm. Masters thesis, King Fahd University of Petroleum and Minerals.

(2005) Analysis of Add/Drop optical waveguide filters with embedded resonant cavities using the method of lines. Masters thesis, King Fahd University of Petroleum and Minerals.

(2005) Multi-scale analysis techniques in pattern recognition systems. Masters thesis, King Fahd University of Petroleum and Minerals.

(2004) Design of optimal variable structure controllers: applications to power system dynamics. Masters thesis, King Fahd University of Petroleum and Minerals.

(2005) Combining classifiers using the dempster-shafer theory of evidence. Masters thesis, King Fahd University of Petroleum and Minerals.

(2005) Development of reconfigurable nonlinear circuits for neural networks. Masters thesis, King Fahd University of Petroleum and Minerals.

(2005) An adaptive neural networks controller for the inline surface oil/water separator. Masters thesis, King Fahd University of Petroleum and Minerals.

(2006) Improved rate-compatible low-density parity-check codes with applications to wireless channels. Masters thesis, King Fahd University of Petroleum and Minerals.

(1999) Performance and design of space-time trellis codes for wireless channels. Masters thesis, King Fahd University of Petroleum and Minerals.

(1990) Design of fractionally spaced equalizers. Masters thesis, King Fahd University of Petroleum and Minerals.

(1994) A neural network approach for load flow estimation and var allocation. Masters thesis, King Fahd University of Petroleum and Minerals.

(1990) Design of voiceband echo cancellers. Masters thesis, King Fahd University of Petroleum and Minerals.

(1994) A PC-based system for the determination of harmonics and intermodulation products in nonlinear circuits. Masters thesis, King Fahd University of Petroleum and Minerals.

(1995) Maintenance scheduling of power system generating units by tabu search. Masters thesis, King Fahd University of Petroleum and Minerals.

(1998) The Transliner current controlled conveyor and its applications. Masters thesis, King Fahd University of Petroleum and Minerals.

(1997) A new model reduction scheme for linear time-invariant systems with polynomial. Masters thesis, King Fahd University of Petroleum and Minerals.

(2000) Echo cancellation using a variable step-size NLMS algorithm. Masters thesis, King Fahd University of Petroleum and Minerals.

(1997) Direct load control using programmable logic controller. Masters thesis, King Fahd University of Petroleum and Minerals.

(1997) Fuzzy logic controller for power system stability enhancement. Masters thesis, King Fahd University of Petroleum and Minerals.

(1994) Study of periodic waveguides by the finite-difference time-domain method and the method of lines. PhD thesis, King Fahd University of Petroleum and Minerals.

(1995) Transient stability assessment using artificial neural networks. Masters thesis, King Fahd University of Petroleum and Minerals.

(1995) Active filters and oscillators using current feedback operational amplifiers. Masters thesis, King Fahd University of Petroleum and Minerals.

(2001) Modified algorithms for the decoding of hamming product codes. Masters thesis, King Fahd University of Petroleum and Minerals.

(2001) Performance evaluation of Rake receiver with adaptive channel estimation for IMT-DS system. Masters thesis, King Fahd University of Petroleum and Minerals.

(1999) Neural networks-based decision feedback equalization using lattice structure. Masters thesis, King Fahd University of Petroleum and Minerals.

(1994) Prediction of harmonic and intermodulation performance of frequency dependent nonlinear circuits and systems. Masters thesis, King Fahd University of Petroleum and Minerals.

(1998) Improved quantization of DCT based compression algorithms for video teleconferencing applications. Masters thesis, King Fahd University of Petroleum and Minerals.

(2000) Performance of quadrature amplitude modulation in Nakagami fading channels with diversity. Masters thesis, King Fahd University of Petroleum and Minerals.

(1992) A new multisampling-based non-coherent FSK receiver using parametric spectrum estimators. Masters thesis, King Fahd University of Petroleum and Minerals.

(1992) Performance of TCM with concatenated codes over fading channels. Masters thesis, King Fahd University of Petroleum and Minerals.

(2000) A Hybrid error control scheme for ATM networks. Masters thesis, King Fahd University of Petroleum and Minerals.

(1996) Management of magnetic fields in and around substations. Masters thesis, King Fahd University of Petroleum and Minerals.

(2003) Adaptive multiuser detection with decision feedback equalizer for interference cancellation. Masters thesis, King Fahd University of Petroleum and Minerals.

(1991) The development of an intelligent alarm processor. Masters thesis, King Fahd University of Petroleum and Minerals.

(2001) Signal strength prediction in the Eastern region of Saudi Arabia. Masters thesis, King Fahd University of Petroleum and Minerals.

(1995) Associative memory neural networks for error correction of linear block codes. Masters thesis, King Fahd University of Petroleum and Minerals.

(1992) Non-uniform reference model in multiple bus multiprocessors. Masters thesis, King Fahd University of Petroleum and Minerals.

(1994) Communication over fading channels with frequency offsets. Masters thesis, King Fahd University of Petroleum and Minerals.

(2003) Application of space-time trellis codes for image transmission over wireless channels. Masters thesis, King Fahd University of Petroleum and Minerals.

(1995) A neural network approach to feedback linearization. Masters thesis, King Fahd University of Petroleum and Minerals.

(1994) A programmable self-adjusting SCR-based AC voltage regulator. Masters thesis, King Fahd University of Petroleum and Minerals.

(1999) Transmission expansion planning using artificial intelligent tools. Masters thesis, King Fahd University of Petroleum and Minerals.

(1992) Realization of a transceiver circuit based on a newly developed coding scheme. Masters thesis, King Fahd University of Petroleum and Minerals.

(1998) Selective encryption techniques for secure transmission of MPEG video bit-streams. Masters thesis, King Fahd University of Petroleum and Minerals.

(2000) A Modified nodal formulation parametric sensitivities for power system analysis. Masters thesis, King Fahd University of Petroleum and Minerals.

(1992) Microcontroller based PWM UPS. Masters thesis, King Fahd University of Petroleum and Minerals.

(1998) Curvature analysis using multiresolution techniques. PhD thesis, King Fahd University of Petroleum and Minerals.

(1997) Estimation and filtering of harmonics. Masters thesis, King Fahd University of Petroleum and Minerals.

(1994) Automated billing system for public utilities. Masters thesis, King Fahd University of Petroleum and Minerals.

(1998) Null steering in partially adaptive arrays using genetic algorithms. Masters thesis, King Fahd University of Petroleum and Minerals.

(1989) Dynamic economic dispatch with sensitivity analysis. Masters thesis, King Fahd University of Petroleum and Minerals.

(1998) Null steering in planar antenna arrays using genetic algorithms. Masters thesis, King Fahd University of Petroleum and Minerals.

(1994) Performance evaluation of mobile communication systems. Masters thesis, King Fahd University of Petroleum and Minerals.

(1993) Channel characterization of radio links in the Southern Region of Saudi Arabia. Masters thesis, King Fahd University of Petroleum and Minerals.

(1997) Adaptive filtering using the least-mean mixed-norms algorithm and its application to echo cancellation. Masters thesis, King Fahd University of Petroleum and Minerals.

(2001) Nonlinear predictive control using genetic algorithms. Masters thesis, King Fahd University of Petroleum and Minerals.

(1995) Enhancement of AC transient stability through multiterminal DC (MTDC) systems. Masters thesis, King Fahd University of Petroleum and Minerals.

(2003) Entropy-constrained reflected residual vector quantization with application to image coding. Masters thesis, King Fahd University of Petroleum and Minerals.

(1999) Performance of turbo codes under designed interleaving and puncturing conditions. Masters thesis, King Fahd University of Petroleum and Minerals.

(1999) Optimal capacitor placement in distribution systems using heuristic techniques. Masters thesis, King Fahd University of Petroleum and Minerals.

(1996) Design of bandlimited, energy optimized data transmission filter. Masters thesis, King Fahd University of Petroleum and Minerals.

(2001) Normalized time varying mixed norm LMS-LMF adaptive algorithm. Masters thesis, King Fahd University of Petroleum and Minerals.

(2001) Detection of high impedance faults using artificial neural networks. Masters thesis, King Fahd University of Petroleum and Minerals.

(1997) Linear-phase modified duobinary data transmission filter. Masters thesis, King Fahd University of Petroleum and Minerals.

(1997) Unit commitment by artificial intelligence techniques. PhD thesis, King Fahd University of Petroleum and Minerals.

(2000) Minority carrier injection in epitaxial schottky barrier diodes. Masters thesis, King Fahd University of Petroleum and Minerals.

(1998) Cancellation of grating lobes in scanned linear antenna arrays using genetic algorithm. Masters thesis, King Fahd University of Petroleum and Minerals.

(2000) Decision feedback equalization using hybrid lattice-neural network structures. Masters thesis, King Fahd University of Petroleum and Minerals.

(1994) Method of lines analysis of Gaussian beam coupling to dielectric slab waveguide. Masters thesis, King Fahd University of Petroleum and Minerals.

(1997) Real and reactive power wheeling cost based on the marginal cost theory. Masters thesis, King Fahd University of Petroleum and Minerals.

(2001) Analysis of metal-clad TM-pass polarizers using the method of lines. Masters thesis, King Fahd University of Petroleum and Minerals.

(2000) An improved fractionally spaced decision feedback equalizer structure. Masters thesis, King Fahd University of Petroleum and Minerals.

(2001) Fast wavelet transforms and seismic compression. PhD thesis, King Fahd University of Petroleum and Minerals.

(2001) Performance driven, low-power, standard VLSI cell placement using simulated evolution. Masters thesis, King Fahd University of Petroleum and Minerals.

(1994) Digitally programmable tuned circuits. Masters thesis, King Fahd University of Petroleum and Minerals.

(1994) Fourier descriptor approach for defect analysis in ultrasonic nondestructive evaluation. Masters thesis, King Fahd University of Petroleum and Minerals.

(2003) An investigation into the error performance of vertical-bell labs layered space-time architecture V-blast. Masters thesis, King Fahd University of Petroleum and Minerals.

(1992) VLSI implementation of petri net models of a class of digital systems. Masters thesis, King Fahd University of Petroleum and Minerals.

(2001) Investigation of dynamic behavior of power system installed with statcom. Masters thesis, King Fahd University of Petroleum and Minerals.

(2004) Analysis of one and two dimensional bandgap structures using automated method of lines with arbitrary longitudinal discontinuities. Masters thesis, King Fahd University of Petroleum and Minerals.

(1998) Design of variable gain transimpedance preamplifier. Masters thesis, King Fahd University of Petroleum and Minerals.

(1992) All optical reflectivity modulation utilizing surface plasmon resonance. Masters thesis, King Fahd University of Petroleum and Minerals.

(1991) Null steering in phased and adaptive arrays by controlling the element positions. PhD thesis, King Fahd University of Petroleum and Minerals.

(1996) Microcontroller based unity power factor convertor. Masters thesis, King Fahd University of Petroleum and Minerals.

(1995) Runlength limited codes with error correction capabilities. Masters thesis, King Fahd University of Petroleum and Minerals.

(2004) Optimal power flow with FACTS devices. Masters thesis, King Fahd University of Petroleum and Minerals.

(1993) Modes of nonlinear optical fibers. PhD thesis, King Fahd University of Petroleum and Minerals.

(1994) Performance analysis of digital modulation schemes used in mobile radio. Masters thesis, King Fahd University of Petroleum and Minerals.

(1994) An expert system for load flow planning. Masters thesis, King Fahd University of Petroleum and Minerals.

(1994) Analysis of the ionized field around HVDC transmission lines. PhD thesis, King Fahd University of Petroleum and Minerals.

(2001) Code acquisition technique using adaptive filters in wireless communication. Masters thesis, King Fahd University of Petroleum and Minerals.

(1998) Harmonic analysis of no-load current in distribution transformers. Masters thesis, King Fahd University of Petroleum and Minerals.

(1987) Power system generation reliability. Masters thesis, King Fahd University of Petroleum and Minerals.

(1998) Capacity of slotted ALOHA under Nakagami fading. Masters thesis, King Fahd University of Petroleum and Minerals.

(1997) Higher-order statistics (HOS)-based deconvolution for ultrasonic nondestructive evaluation (NDE) of materials. Masters thesis, King Fahd University of Petroleum and Minerals.

(1988) Multipath fading effects on digital microwave links and countermeasures. Masters thesis, King Fahd University of Petroleum and Minerals.

(1987) Data-flow expression evaluator for VLSI implementation. Masters thesis, King Fahd University of Petroleum and Minerals.

(1980) Microcomputer control system for programmable logic array burn-in. Masters thesis, King Fahd University of Petroleum and Minerals.

(1987) A new transformation and design technique for switched capacitor high pass ladder filters. Masters thesis, King Fahd University of Petroleum and Minerals.

(1995) Design, modeling, and VLSI implementation of a RISC dataflow array processor. Masters thesis, King Fahd University of Petroleum and Minerals.

(1990) Spectral estimation based on singular value decomposition techniques. Masters thesis, King Fahd University of Petroleum and Minerals.

(1982) Design of solarimeter. Masters thesis, King Fahd University of Petroleum and Minerals.

(1992) Development a DSP-32C based electrocardiograph machine using microcomputers. Masters thesis, King Fahd University of Petroleum and Minerals.

(1980) A Study on the performance of delta modulation systems. Masters thesis, King Fahd University of Petroleum and Minerals.

(1986) Microprocesser based analog speech Scrambler/descrambler. Masters thesis, King Fahd University of Petroleum and Minerals.

(1998) Harmonic analysis of no-load current in distribution transformers. Masters thesis, King Fahd University of Petroleum and Minerals.

(1991) H°° state-feedback with closed-loop transfer recovery (H°° /CLTR) design method. Masters thesis, King Fahd University of Petroleum and Minerals.

(1990) Radio frequency spread spectrum for distributed control systems. Masters thesis, King Fahd University of Petroleum and Minerals.

(1988) A Systolic algorithm for VLSI design of a viterbi decoder. Masters thesis, King Fahd University of Petroleum and Minerals.

(1988) Globally stable adaptive pole placement. PhD thesis, King Fahd University of Petroleum and Minerals.

(1998) Two improved lossless image compression methods. Masters thesis, King Fahd University of Petroleum and Minerals.

(1995) Reliability equivalents for AC adequacy evaluation of large power systems. Masters thesis, King Fahd University of Petroleum and Minerals.

(1983) Robust decentralized L.F.C. with online iteraction trajectory improvement. Masters thesis, King Fahd University of Petroleum and Minerals.

(1988) Generation outage dynamic contingency analysis using frequency prediction. Masters thesis, King Fahd University of Petroleum and Minerals.

(2001) Reliability analysis of ATM network with error control. Masters thesis, King Fahd University of Petroleum and Minerals.

(1992) Optimal shunt compensators at nonlinear busbars. Masters thesis, King Fahd University of Petroleum and Minerals.

(1997) Design of 1-D and 2-D IIR digital filters using IRLS technique. Masters thesis, King Fahd University of Petroleum and Minerals.

(2005) Facts-based stabilizers for power system stability enhancement. Masters thesis, King Fahd University of Petroleum and Minerals.

(2006) Optimization of ideal reactive distillation column using hybrid PSO algorithm. Masters thesis, King Fahd University of Petroleum and Minerals.

(2006) Impact of variability of Nakagami-m parameter on the performance of digital communication systems. Masters thesis, King Fahd University of Petroleum and Minerals.

(2004) Design of robust PSS and facts-based controllers for stability enhancement of power systems. Masters thesis, King Fahd University of Petroleum and Minerals.

(1999) On the performance of turbo codes over Rayleigh fading channels. Masters thesis, King Fahd University of Petroleum and Minerals.

(2001) Null steering and pattern control in smart antenna arrays. Masters thesis, King Fahd University of Petroleum and Minerals.

(2001) Automatic scheduling of substation maintenance outages. Masters thesis, King Fahd University of Petroleum and Minerals.

(2003) Channel estimation in OFDM systems. Masters thesis, King Fahd University of Petroleum and Minerals.

(1990) Pattern matching and applications. Masters thesis, King Fahd University of Petroleum and Minerals.

(2002) Industrial plants reliability evaluation. Masters thesis, King Fahd University of Petroleum and Minerals.

(2004) Pade approximants technique for the analysis of waveguide junctions and beam splitters. Masters thesis, King Fahd University of Petroleum and Minerals.

(2005) Design of microstrip linear phased array antenna using integrated array feeder. Masters thesis, King Fahd University of Petroleum and Minerals.

(1984) On the propagation of electromagnetic waves in an inhomogeneous medium. Masters thesis, King Fahd University of Petroleum and Minerals.

(1996) Magnetic field management in underground cables. Masters thesis, King Fahd University of Petroleum and Minerals.

(2000) Onset voltage of corona on coated conductors. Masters thesis, King Fahd University of Petroleum and Minerals.

(2000) Analysis of anti-resonant reflecting optical waveguide grating using the method of lines. Masters thesis, King Fahd University of Petroleum and Minerals.

(1995) Architectures for arithmetic operations in Galois Fileds GF(2m). Masters thesis, King Fahd University of Petroleum and Minerals.

(2003) Air conditioners performance using soft starter. Masters thesis, King Fahd University of Petroleum and Minerals.

(2004) A Pose invariant face recognition system using subspace techniques. Masters thesis, King Fahd University of Petroleum and Minerals.

(2002) Channel modeling and perforamce analysis of directive wideband Nakagami fading channels. Masters thesis, King Fahd University of Petroleum and Minerals.

(2004) Performance of punctured space-time codes over wireless channels and their applications. Masters thesis, King Fahd University of Petroleum and Minerals.

(1994) Effects of diversity combining, coding and equalization on digital microcellular mobile communication systems. Masters thesis, King Fahd University of Petroleum and Minerals.

(1998) New joint time-frequency transforms with improved properties. PhD thesis, King Fahd University of Petroleum and Minerals.

(1993) Digital filter design by approximate time-domain modeling. Masters thesis, King Fahd University of Petroleum and Minerals.

(1994) Application of artificail neural networks to optical character recognition. Masters thesis, King Fahd University of Petroleum and Minerals.

(2001) Identification of Hammerstein and Wiener models using radial basis functions neural networks. Masters thesis, King Fahd University of Petroleum and Minerals.

(2003) Closed loop identification for model predictive control: a case study. Masters thesis, King Fahd University of Petroleum and Minerals.

(2000) Null-steering in planar arrays by phase perturbations using genetic algorithms. Masters thesis, King Fahd University of Petroleum and Minerals.

(1994) Analysis of the ionized field around multi-phase power transmission lines. PhD thesis, King Fahd University of Petroleum and Minerals.

(1994) Assessment of the onset condition of upward streamers from energized Franklin rods. Masters thesis, King Fahd University of Petroleum and Minerals.

(2003) Adaptive forward error correction coding for diversity communication systems. Masters thesis, King Fahd University of Petroleum and Minerals.

(1983) Homomorphic analysis and synthesis of speech generated by an all-pole model. Masters thesis, King Fahd University of Petroleum and Minerals.

(1980) The Applications of microcomputers for vehicular traffic control. Masters thesis, King Fahd University of Petroleum and Minerals.

(1993) Identification of coherent generators using linear trajectory. Masters thesis, King Fahd University of Petroleum and Minerals.

(1995) A novel architecture for switched-capacitor FIR filters. Masters thesis, King Fahd University of Petroleum and Minerals.

(1989) An LPC analysis and synthesis system for Arabic speech. Masters thesis, King Fahd University of Petroleum and Minerals.

(1990) Design of state feedback control laws based on reduced order models. Masters thesis, King Fahd University of Petroleum and Minerals.

(1998) Performance evaluation of I-Q trellis codes over frequency-selective fading channels. Masters thesis, King Fahd University of Petroleum and Minerals.

(1982) Software reliability modelling and evaluation via Markov and semi-Markov processes. Masters thesis, King Fahd University of Petroleum and Minerals.

(1985) Multiple access schemes for data communications. Masters thesis, King Fahd University of Petroleum and Minerals.

(1985) Reduced order models for synchronous machines. Masters thesis, King Fahd University of Petroleum and Minerals.

(1979) Peak load forecast for Saudi Arabia electric power generation, 1978-2000. Masters thesis, King Fahd University of Petroleum and Minerals.

(1991) Towards an optimal accumulator size for the Hough transform. Masters thesis, King Fahd University of Petroleum and Minerals.

(1992) Performance of multistage interconnection networks under non-uniform reference model. Masters thesis, King Fahd University of Petroleum and Minerals.

(2004) Cost effective design of conventional type distribution transformer using optimization techniques. Masters thesis, King Fahd University of Petroleum and Minerals.

(2000) Neural network based nonlinear blind equalization schmes for high order M-ary QAM signals. Masters thesis, King Fahd University of Petroleum and Minerals.

(1996) A new enhanced binary ghost canceling reference signal for TV ghosts. Masters thesis, King Fahd University of Petroleum and Minerals.

(1996) Programmable current mirrors: design and applications. Masters thesis, King Fahd University of Petroleum and Minerals.

(2000) Modeling and control of stand-alone and parallel operating diesel generators. Masters thesis, King Fahd University of Petroleum and Minerals.

(1997) Intelligent techniques approach to power systems identification and control. PhD thesis, King Fahd University of Petroleum and Minerals.

(2002) Analysis and application of evanescent field enhancement in multi-layer arrow waveguide. Masters thesis, King Fahd University of Petroleum and Minerals.

(1985) Coherency based equivalents for long-term dynamic studies. Masters thesis, King Fahd University of Petroleum and Minerals.

(2001) Analysis of multi-layer arrow planar waveguide for evanescent field enhancement in low-index. Masters thesis, King Fahd University of Petroleum and Minerals.

(1979) Hardware digital protection. Masters thesis, King Fahd University of Petroleum and Minerals.

(1976) Theoretical study of lattice solitons in nonlinear lumped networks. Masters thesis, King Fahd University of Petroleum and Minerals.

(2005) Saturation of current transformers and its impact on digital overcurrent relays. Masters thesis, King Fahd University of Petroleum and Minerals.

(1997) The Four-terminal floating nullor (FTFN) and its applications. Masters thesis, King Fahd University of Petroleum and Minerals.

(1992) Generalized balanced and approximately balanced representations. Masters thesis, King Fahd University of Petroleum and Minerals.

(1998) A PROGRAMMABLE PHASE SHIFTER FOR SINUSOIDAL SIGNALS. Active and Passive Electronic Components, 21 (2). pp. 107-112.

(1998) CURRENT-MODE UNIVERSAL FILTER USING FFFNs. Active and Passive Electronic Components, 21 (2). pp. 117-122.

(1998) New Universal Filter with One Input and Five Outputs Using Current-Feedback Amplifiers. Analog Integrated Circuits and Signal Processing, 16 (3). pp. 239-244.

(2001) " A translinear circuit for sinusoidal frequency division". In: IEEE Instrumentation and Measurement Technology Conference, Budapest, Hungary.

DC POWER SUPPLY SIMULATOR: An Educational Laboratory Simulator for DC Power Supply. KFUPM. (Unpublished)

Improving BER Performance of LDPC Codes based on Intermediate Decoding Results. In: IEEE ICSPC, Dec. 2007.

Near-Far Problem Impact on Mobile Radiolocation Accuracy in CDMA Cellular Networks. In: IEEE Int’l. Conf. on Telecom, May 2007.

A New Biasing Technique for the MOS transistor. In: 10th WSEAS International Conference on CIRCUITS, July 10-12 , 2006, Vouliagmeni, Athens, Greece.

"Large signal performance of micromachined silicon inductive microphones". In: IEEE International Conference on Industrial Technology, December 14-17, 2005, Hong Kong, China.

Analysis and design of UPFC damping stabilizers for power system stability enhancement. In: Proceedings of The IEEE Symposium on Industrial Electronics ISIE’2006, July 9-13, 2006, Montreal, Canada.

"Analysis of the effect of radio frequency interference on the DC performance of CMOS operational amplifiers". In: 16th International Zurich Symposium on Electromagnetic Compatibiliuty, February 14-18, 2005, Zurich, Switzerland,.

“Cooperative Education Experience at King Fahd University of Petroleum & Minerals". In: 14th World Conference on Cooperative Education, June 14-16, 2005, Boston, USA.

"A new polyphase mixed-mode bandpass filter section using current-feedback operational amplifiers". In: 9th WSEAS International Conference on Circuits, July 11-13, 2005, Athens, Greece.

"A new current-mode current-controlled current-conveyor based universal filter". In: 9th WSEAS International Conference on Circuits, July 11-13, 2005, Athens, Greece.

"A new polyphase filter using programmable-gain current-controlled current-conveyor". In: 9th WSEAS International Conference on Circuits, July 11-13, 2005, Athens, Greece.

"Undergraduate engineering education: New challenges". In: International Conference on Engineering Education, March 25-27, 2006, Qassim University, Qassim, Saudi Arabia.

"Grading strategies: Are we doing well?". In: International Conference on Engineering Education, March 25-27, 2006, Qassim University, Qassim, Saudi Arabia.

"In our higher education institutions, are wireless engineering programs coming of age?". In: International Conference on Engineering Education, March 25-27, 2006, Qassim University, Qassim, Saudi Arabia.

"Applied engineering education experience at King Fahd University of Petroleum and Minerals". In: International Conference on Engineering Education, March 25-27, 2006, Qassim University, Qassim, Saudi Arabia.

Performance Analysis of Bit-Interleaved Space-Time (BI-ST) Coded Systems Over Wireless Channels. In: Proceedings of the IEEE Int’l Conference on Communications, (ICC’06), June 2006, Istanbul, Turkey.

Performance Analysis of Coded Cooperation Diversity in Wireless Networks. In: Proceedings of the IEEE Int’l Conference on Communications, (ICC’06), June 2006, Istanbul, Turkey.

On the Performance of Cooperative Wireless Networks under Interference Conditions. In: Proceedings of the International Symposium on Signal Processing and its Applications (ISSPA 2007), February 2007, Sharjah, UAE.

Dynamic Performance Improvement of an Isolated Wind Turbine Induction Generator. In: 4th IEEE GCC Conference, Power Systems and Control, Nov. 12-14, 2007, Bahrain.

"Postgraduate engineering education in the Arab world: What is really needed?". In: 4th International Forum on Engineering Education, April 25-27, 2006, University of Sharjah, Shrajah, United Arab Emirates.

Dynamic Performance of a Wind Generation System with Thyristor Controlled Capacitor Compensation. In: 7th Saudi Engineering Conference, Nov. 22-24, 2007, Riyadh.

"Engineering design: How to introduce it in low level courses?". In: Proceedings of the 2nd International Conference on Engineering Education & Training, April 9-11, 2007, Kuwait.

"Restructuring the undergraduate engineering education in the Arab world". In: 4th International Forum on Engineering Education, April 25-27, 2006, University of Sharjah, Shrajah, United Arab Emirates.

"Ethical issues in the publication of research". In: Symposium on Graduate Studies in the Universities of the GCC Countries, November 26-27, 2006, King Faisal University, Al-Ahsa, Saudi Arabia.

"Engineering education in Saudi Arabia: Problems and solutions". In: The Fourth Saudi Technical Conference and Exhibition, December 2-6, 2006, Riyadh, Saudi Arabia.

"A reconfigurable Satlin/Sigmoid/Gaussian/Triangular basis functions computation circuits". In: IEEE Asia Pacific Conference on Circuits and Systems, December 4-7, 2006, Singapore.

Design of PSS and STATCOM-Based Damping Stabilizers Using Genetic Algorithms. In: Proceedings of The 2006 IEEE Power Engineering Society, June 18-22, 2006, Montreal, Canada.

Near-Instantaneously Adaptive Cooperative Uplink Schemes Based on Space-Time Block Codes and V-BLAST. In: IEEE Vehicular Technology Conference, (VTC’07/Spring), April 2007, Dublin, Irland.

On the Performance of Diversity Reception of Coded DSSS in Nakagami Multipath Fading. In: Proceedings of the 3rd International Conference on Wireless and Mobile, March 2007, Guadeloupe, French Caribbean.

Adaptive STATCOM Control for a Multi-machine Power System. In: 4th IEEE GCC Conference, Power Systems and Control, Nov. 12-14, 2007, Bahrain.

Adaptive Stabilizing Control of a Power System Through UPFC Shunt and Series Converters. In: The 5th IASTED Int. Conference on Circuits & Systems, July 2007, Banff, Canada.

Simultaneous Design of Damping Controllers and Internal Controllers of a Unified Power Flow Controller. In: Proceedings of The 2006 IEEE Power Engineering Society General Meeting,, June 18-22, 2006, Montreal, Canada.

Electric Circuit Recognition. In: 2nd IEEE GCC 2004 Conference, 23-25 November 2004, Manama, Bahrain.

Robust STATCOM Controller Design Using Genetic Algorithms. In: Article 170, Second Int. Conf. on Modeling, Simulation & Applied Optimization, March 2007, Petroleum Institute, UAE.

Power System Stability in Deregulated Environment. In: Proceedings of The 15th GCC-CIGRE, November 28–30, 2006, Abu-Dhabi,United Arab Emirates.

Design of PSS and STATCOM-Based Damping Stabilizers Using Genetic Algorithms. In: Proceedings of The 2006 IEEE Power Engineering Society,IEEE PES GM 2006, June 18-22, 2006, Montreal, Canada.

A Hybrid Wind Diesel Power System for an Isolated village in Saudi Arabia. In: 5th World Wind Energy Conference 2006, 6-8 Nov. 2006, New Delhi, India.

Distributed Generation: Definition, Benefits And Their Applications within the Middle East. In: IEEE 3rd International Energy Exergy and Environment Symposium, 1-5 July 2007, Evora, Portugal.

On Site Wind Measurements for Power Assessment in Saudi Arabia. In: Global Conference on Renewable Energy Approaches fro Desert Regions, September 18-22, 2006, Amman, Jordan.

Saturation of Current Transformers and its Impact on Digital Overcurrent Relays. In: IEEE PES Transmission & Distribution Conference and Exposition, August 10-15, 2006, Caracas, Venezuela.

HARMONIC ANALYSIS OF An Industrial PROCESS. In: IASTED Power &Energy, April16-18, 2005, Krabi, Thailand.

Performance evaluation of Uplink CAC for 3G WCDMA wireless networks with multi-servers. In: Proceedings IEEE-ICCS06, October 2006, Singapore.

RRM with adaptive rate scheduling for multi-operator 3G and beyond cellular networks. In: Proceedings IEEE-Vehicular Tech Conf., April 2007, Dublin.

Performance analysis of adaptive rate scheduling scheme for 3G WCDMA wireless networks with multiple operators. In: Proceedings IEEE-ICC 2007, Glasgow, Scotland.

Binary Ant Colony Algorithm for Symbol Detection in a Spatial Multiplexing System. In: 6th International Conference on Unconventional Computation, August 2007, Queens’ University, Canada.

(2007) Performance Limits in CDMA PN Code Acquisition. IEEE Transactions on Wireless Communications, 6 (9). pp. 3248-3255.

(2007) Decentralized, Self-organizing, Potential field-based Control for Individually-motivated, Mobile Agents in a Cluttered Environment: A Vector-Harmonic Potential Field Approach. IEEE Transactions on Systems, Man, & Cybernetics, Part A: systems and humans, 37 (3). pp. 372-390.

(1992) Generalized Balanced and Approximately Balanced Representations. Masters thesis, KING FAHD UNIVERSITY OF PETROLEUM & MINERALS.

(1992) A New Multisampling-Based Non-Coherent FSK Receiver Using Parametric Spectrum Estimators. Masters thesis, KING FAHD UNIVERSITY OF PETROLEUM & MINERALS.

(1992) Performance of TCM with Concatenated Codes Over Fading Channels. Masters thesis, KING FAHD UNIVERSITY OF PETROLEUM & MINERALS.

(1991) The Development of an Intelligent Alarm Processor. Masters thesis, KING FAHD UNIVERSITY OF PETROLEUM & MINERALS.

(1992) Microcontroller Based PWM UPS. Masters thesis, KING FAHD UNIVERSITY OF PETROLEUM & MINERALS.

(1993) Channel Characterization of Radio Links in the Southern Region of Saudi Arabia. Masters thesis, KING FAHD UNIVERSITY OF PETROLEUM & MINERALS.

(1992) VLSI Implementation of Petri Net Models of a Class of Digital Systems. Masters thesis, KING FAHD UNIVERSITY OF PETROLEUM & MINERALS.

(1992) All Optical Reflectivity Modulation Utilizing Surface Plasmon Resonance. Masters thesis, KING FAHD UNIVERSITY OF PETROLEUM & MINERALS.

(1992) Development of a DSP-32C Based Electrocardiograph Machine using Microcomputers. Masters thesis, KING FAHD UNIVERSITY OF PETROLEUM & MINERALS.

(1991) H ∞ State Feedback with Closed-Loop Transfer Recovery (H ∞ / CLTR) Design Method. Masters thesis, KING FAHD UNIVERSITY OF PETROLEUM & MINERALS.

(1993) Identification of Coherent Generators Using Linear Trajectory. Masters thesis, KING FAHD UNIVERSITY OF PETROLEUM & MINERALS.

(1992) Optimal Shunt Compensators at Nonlinear Busbars. Masters thesis, KING FAHD UNIVERSITY OF PETROLEUM & MINERALS.

(1991) Towards an Optimal Accumulator Size For the Hough Transform. Masters thesis, KING FAHD UNIVERSITY OF PETROLEUM & MINERALS.

(1992) Performance of Multistage Interconnection Networks under Non-Uniform Reference Model. Masters thesis, KING FAHD UNIVERSITY OF PETROLEUM & MINERALS.

OFF AXIS INCLINATION MEASUREMENT OF DRILLING SHAFTS. The 6th Saudi Engineering Conference, KFUPM, Dhahran, December 2002.

"An improved universal CMOS current-mode analog function synthesizer". In: International Symposium on Integrated Circuits, September 26-28, 2007, Singapore.

"Peer-Review: Criticisms, Failures and Standardization". In: Symposium on Academic Peer Review, January 7-8, 2008, Imam Muhammad Bin Saud University, Riyadh, Saudi Arabia.

"Restructuring the Engineering Education in Saudi Arabia". In: the Seventh Saudi Engineering Conference, December 3-5, 2007, Riyadh, Saudi Arabia.

In GCC Universities which Electrical and Computer Engineering Curricula is Really Needed: Flexible or Specialized? In: 4th IEEE GCC Conference and Exhibition,, November 12-14, 2007, Manama, Bahrain.

"Building engineering and technology capacity in the Arab countries". In: The 2nd Conference on Planning & Development of Education and Scientific Research in the Arab States, February 24-27, 2008, KFUPM, Dhahran, Saudi Arabia.

A FAMILY OF NORMALIZED LEAST MEAN FOURTH ALGORITHMS. IEEEGCC 2007.

Interconnect-Efficient LDPC Code Design. In: Int’l Conf. on Microelectronics, Dec. 2006.

A Comparative Performance and Complexity Study of Short- Length LDPC and Turbo Product Codes. In: Proc. IEEE Intl. Conf. Info. & Comm. Tech., April 2006.

Parallel Computing Simulation Platform for Evaluating LDPC Codes Performance. In: IEEE ICSPC, Dec. 2007.

Frequency-independent Phase Shifter. In: ICM2006, December 16-18,06, KFUP.

Multiobjective Optimal VAR Dispatch Using Strength Pareto Evolutionary Algorithm. In: Proceedings of The IEEE World Congress on, July 16-21,2006, Vancouver, Canada.

Design and Implementation of a Bilingual LED Message Board. IEEETEM2003.

AN ALGORITHM FOR IRIS IDENTIFICATION USING FOURIER DESCRIPTORS. IEEETEM2003.

TE/TM Pass Guided Wave Optical Polarizer. IEEETEM2003.

COLOR IMAGE IDENTIFICATION AND RESTORATION. NCC1997.

HIGHER ENGINEERING EDUCATION: WHICH TYPE IS REALLY NEEDED? ENGINEERING SCIENCE OR ENGINEERING TECHNOLOGY. The 6th Saudi Engineering Conference, KFUPM, Dhahran, December 2002.

NONDESTRUCTIVE TESTING EDUCATION PROGRAM: A PRACTICAL STRATEGY FOR YOUTH EMPLOYMENT IN SAUDI ARABIA. The 6th Saudi Engineering Conference, KFUPM, Dhahran, December 2002.

"Prediction of passive intermodulation arising from corrosion in mobile communication systems". In: Wireless Design Conference, May 15-17, 2002, London, U.K..

"Harmonic and intermodulation performance of Mach-Zehnder quadratic electro-optic intensity modulator". In: Wireless Design Conference, May 15-17, 2002, London, U.K.

"In our universities, are engineering technology programs coming of age?". In: Proceedings of the Second Saudi Technical Conference & Exhibition, 26-30 October, 2002, Riyadh, Saudi Arabia,.

New Realization of CMOS Current Controlled Conveyors with Variable Current Gain and Negative Input Resistance. In: The 46th IEEE International Midwest Symposium On Circuits and Systems, 27-30 December, 2003.

"Analog low-voltage current-mode implementation of digital logic gates". In: IEEE Asia-Pacific Conference on Circuits and Systems, 28-31 October, 2002, Bali, Indonesia,.

"Higher engineering education: Which type is really needed? ". In: Engineering science or engineering technology, The 6th Saudi Engineering Conference,, 14-17 December, 2002, KFUPM, Dhahran, Saudi Arabia.

An Improved Current Mirror Cell. In: the 4th ACS /IEEE international Conference on computer systems and applications, March 8-11,06, Dubai/Sharjah.

"Simulation of a mutually ccoupled circuit using plus-type ". In: IEEE Asia-Pacific Conference on Circuits and Systems, December ,6-9, 2004, Tainan, Taiwan.

"In our higher education institutions, are instrumentation and measurement engineering technology programs coming of age?". In: Third Saudi Technical Conference and Exhibition, December 11-15, 2004, Riyadh, Saudi Arabia.

"Smart electronic guide for pilgrim (in Arabic)". In: Fifth Symposium on Hajj Research, January 12-14, 2005, Umm Ul-Qura University, Makkah Al-Mukarramah, Saudi Arabia.

"The coupling of Teaching and Research for Improving the Transfer of Knowledge and Technology". In: The Third Symposium on Scientific Research and Technical Development Outlook in The Arab World, April 11-14, 2004, Riyadh, Saudi Arabia.

WEB BASED ENGINEERING EDUCATION. The 6th Saudi Engineering Conference, KFUPM, Dhahran, December 2002.

MARKS AND MARKING PRACTICES: TOWARDS AN IMPROVED SYSTEM. The 6th Saudi Engineering Conference, KFUPM, Dhahran, December 2002.

(1998) A PROGRAMMABLE REFERENCE-VOLTAGE SOURCE. Active and Passive Electronic Components, 21 (2). pp. 113-116.

(1998) Prediction of the Harmonic Distortion in Mosfet Gate Capacitors. Analog Integrated Circuits and Signal Processing, 16 (3). pp. 299-304.

(1998) New current-mode current-controlled filters using the current-controlled conveyor. International Journal of Electronics, 85 (4). pp. 483-488.

(1998) Multi-function active-only current-mode filter with three inputs and one output. International Journal of Electronics, 85 (4). pp. 431-435.

(1998) Novel CFOA-based sinusoidal oscillators. International Journal of Electronics, 85 (4). pp. 437-441.

(1998) A novel single-input multiple-output current-mode current-controlled universal filter. Microelectronics Journal, 29 (11). pp. 901-905.

(1998) PROGRAMMABLE CURRENT-MODE UNIVERSAL ACTIVE FILTERS EMPLOYING CURRENT CONVEYORS. Active and Passive Electronic Components, 21. pp. 221-230.

(1998) Large signal analysis of dual parallel Mach-Zehnder modulator. Proceedings of the National Science Council, ROC, Part A: Physical Sciences and Engineering,, 22. pp. 800-804.

(1998) Current-mode sinusoidal oscillators using two FTFNs. Proceedings of the National Science Council, ROC, Part A: Physical Sciences and Engineering, 22. pp. 758-764.

(1998) Harmonic distortion due to output conductance in SI cells. Electronics Letters, 34. pp. 2182-2183.

(1998) An improved analysis for the nonlinear distortion of analog MOSFET circuits with signals simultaneously applied to body, gate and drain terminals. Microelectronics Journal, 29 (12). pp. 951-960.

(1998) Large signal analysis of optical intensity modulator with dual-modulation compensation. Frequenz, 52 (11). pp. 248-251. ISSN 0016-1136

(1998) Universal current-controlled current-mode filter using the multiple-output translinear current conveyor. Frequenz, 52 (11). pp. 252-254. ISSN 0016-1136

(1999) A translinear circuit for sinusoidal frequency multiplication. International Journal of Electronics, 86 (1). pp. 35-41.

(1999) Nonlinear performance of the CMOS buffer stages. International journal of electronics, 86 (1). pp. 43-53. ISSN 0020-7217

(1999) Current-Mode Sinusoidal Oscillators Using Single FTFN. IEEE Transactions on Circuits and Systems-II: Analog and Digital Signal Processing, 46 (1). pp. 69-74.

(1999) A simple algorithm for computing the Fourier spectrum of experimentally obtained signals. Applied Mathematics and Computation, 98 (2). pp. 229-239.

(1999) Current-mode quadrature sinusoidal oscillators using two FTFNs. FREQUENZ, 53. pp. 27-30.

(1999) Nonlinear distortion of an FM signal by half-wave linear rectification. Applied Mathematics and Computation, 99 (1). pp. 47-59.

(1999) Universal two-input two-output current-mode active biquad using FTFNs. International Journal of Electronics, 86 (2). pp. 181-188.

(1999) A novel three inputs and one output universal current-mode filter using plus-type CCIIs. Microelectronics Journal, 30 (3). pp. 287-292.

(1999) Comments on "Current mode simulation of lossless floating inductance". International Journal of Electronics, 86. pp. 321-322.

(1999) RELIABILITY AND AVAILABILITY ANALYSIS OF SOME SYSTEMS WITH COMMON-CAUSE FAILURES USING SPICE CIRCUIT SIMULATION PROGRAM. Active and Passive Electronic Components, 22 (1). pp. 31-49.

(1999) Large signal analysis of linearized electrooptic modulators. International Journal of Electronics and Communications, 53. pp. 61-69.

(1999) Large signal analysis of low-voltage bipolar analog functional elements using Fourier-series approximations. FREQUENZ, 53. pp. 121-134.

(1999) Electronically tunable capacitance multiplier and frequency-dependent negative-resistance simulator using the current-controlled current conveyor. Microelectronics journal, 30 (9). pp. 869-873. ISSN 0959-8324

(1999) New negative immittance function simulators using current conveyors. Microelectronics Journal, 30 (9). pp. 911-915.

(1999) Large signal harmonic and intermodulation distortion due to output conductance in SI cells. FREQUENZ, 53. pp. 195-198.

(2008) Circularly Polarized Microstrip Ferrite Phase-shifter with Uneven Excitation. In: Progress in Electromagnetic Research Symposium (PIERS), Cambridge, USA.

(1999) A translinear circuit for analogue function synthesis based on a Taylor series. International Journal of Electronics, 86 (11). pp. 1341-1348.

(1999) On the realization of the current controlled current-mode amplifier using the current controlled conveyor. International Journal of Electronics, 86 (11). pp. 1333-1340.

(1999) Identification of single-amplifier partially active-R sinusoidal oscillators. Proceedings of the National Science Council, ROC, Part A: Physical Sciences and Engineering, 23. pp. 739-743.

(1999) Blocking and desensitization in bipolar and MOSFET differential amplifiers. IEEE Transactions on Electromagnetic Compatibility, 41 (1). pp. 393-398.

(2007) Theoretical Analysis of Magnetically switchable shorted patch antenna. ELECTROMAGNETICS, 27 (8). pp. 545-551. ISSN 0272-6343

(2000) Large signal analysis of low-voltage MOS analogue functional elements using Fourier-series approximations. International Journal of Electronics, 87 (11). pp. 1301-1305.

(2000) New sinusoidal oscillators with fully uncoupled control of oscillation frequency and condition using three CCII+s. Analog Integrated Circuits and Signal Processing, 24 (3). pp. 253-261.

Nonlinear distortion of the fiber optic microphone. Active and Passive Electronic Components, 23 (1). pp. 1-11.

(2000) Using SPICE circuit simulation program in reliability analysis of redundant systems with non-repairable units and common-cause failures. Active and Passive Electronic Components, 22 (4). pp. 235-255.

(1999) Trigonometric approximations for some Bessel functions. Active and Passive Electronic Components, 22 (2). pp. 75-85.

(2000) A translinear programmable analog nonlinear function synthesizer. Proceedings of the National Science Council, ROC, Part A: Physical Sciences and Engineering, 24 (2). pp. 143-147.

(2000) New grounded-capacitor grounded-resistor controlled universal filter using current-feedback amplifiers. Proceedings of the National Science Council, ROC, Part A: Physical Sciences and Engineering, 24 (3). pp. 205-209.

(2000) Comment on "Active simulation of grounded inductors with CCII+s and grounded passive elements". International Journal of Electronics, 87 (2). pp. 177-181.

(2000) Universal current-mode filter using single four-terminal floating nullor. Microelectronics Journal, 31 (2). pp. 123-127.

(2000) Intermodulation performance of biased-nonlinearities. Applied Mathematics and Computation,, 107 (2). pp. 211-224.

(2000) Large signal analysis of low-voltage BiMOS analog multipliers using Fourier-series approximations. Proceedings of the National Science Council, ROC, Part A: Physical Sciences and Engineering, 24 (6). pp. 480-488.

(2000) On the implementation of a very low-spurious Si-Bipolar frequency multiplier. , Proceedings of the National Science Council, ROC, Part A: Physical Sciences and Engineering, 24 (6). pp. 489-495.

(2003) “Nonlinear System Identification Using Neural Networks”. In: the First GCC IEEE conference, Bahrain.

(2003) “Transmission Expansion Planning Based on Tabu Search Algorithm”. In: Power and Energy Systems EuroPES, Marbella, Spain. (Submitted)

(2003) "A Genetic Algorithm Based Transmission Expansion Planning". In: Artificial Intelligence and Applications, Benalmádena, Spain.

(2004) “Variable Structure Load Frequency Controller: Optimal Design and Chattering Reduction using Particle Swarm Optimization Algorithm”. In: OPTIM, Brasov, Romania.

(2004) “Distribution Transformer Design Optimization Based on a Nonlinear Programming Algorithm”. In: OPTIM, Brasov, Romania.

(2004) “Transmission Expansion Planning Based on Tabu Search Algorithm”. In: 16th European Conference on Artificial Intelligence, Valencia, Spain. (Submitted)

(1995) " Radiation Characteristics of slots on conducting circular cylinder covered by eccentric Dielectric Cylinder ". IEE Proceedings part H, Microwave Antennas and Propag, 142 (2). pp. 168-172.

(2007) "Frequency Conversion at a Factory Complex in Saudi Arabia". In: The International Conference on Electrical Engineering, Hong Kong.

(2005) “Power Transmission Lines Generated Electric and Magnetic Fields Calculations”. In: COMSOL Multiphysics Conference, Cambridge, USA.

(2006) "Diagnosing The Aging Conditions Of High Voltage Silicone Rubber". In: The 6th Jordanian International Electrical & Electronics Engineering Conference (JIEEEC),, Amman, Jordan.

(2005) "Safety Assessment for Electric Utility Workers Exposed to ELF-EMF: Literature Review". In: GCC Power Conference & Exhibition, Doha, Qatar.

(2003) Modified CIC Filter for Sample Rate Conversion in Software Radio Systems. IEEE SIGNAL PROCESSING LETTERS, 10 (5).

(1996) A NEW GCR WAVEFORM FOR DEGHOSTING TV SIGNALS. IEEE Transactions on Consumer Electronics,, 42 (4). pp. 920-929.

(2006) Efficient Sample Rate Conversion for Software Radio Systems. IEEE TRANSACTIONS ON SIGNAL PROCESSING, 54 (3). pp. 932-939.

(2004) Efficient Wideband Channelizer for Software Radio Systems Using Modulated PR Filterbanks. IEEE TRANSACTIONS ON SIGNAL PROCESSING,, 52 (10). pp. 2807-2820.

(2004) Performance analysis of buffered R-ALOHA systems using tagged user approach. Journal of Network and Computer Applications, 27 (3). pp. 131-150. ISSN 1084-8045

(2004) A unified approach to analyze multiple access protocols for buffered finite users. Journal of Network and Computer Applications, 27 (1). pp. 47-76.

(2006) Flexible digital Scrambler/De-Scrambler system. WSEAS Transactions on Circuits and Systems, 5 (8). pp. 1376-1380.

(1988) Design of a programmable length FIFO memory and its controller. International Journal of Electronics, 65 (5). pp. 923-932.

(1987) Research note. A CMOS cell for parallelly loadable counters. International Journal of Electronics,, 63 (6). pp. 867-871.

(2007) Convergence and steady-state analysis of the normalized least mean fourth algorithm. Digital Signal Processing, 17 (1). pp. 17-31.

(2001) Multilayer perceptron-based DFE with lattice structure. Neural Networks, IEEE Transactions on, 12 (3). pp. 532-545.

“Model Predictive Control of Shell Benchmark Process”. In: 10th IEEE International Conference on Electronics, Circuits, and Systems,UAE, 2003.. (Submitted)

(2003) ”Neural Networks Identification of a Gas Plant NGL”. In: Proceedings of the IASTED Conference on Intelligent Systems and Control, Salsburg, Austria, 2003..

(2003) “Closed Loop Identification with Model Predictive Control: A Case Study”. In: Proceedings of the Society of Instrument and Control Engineers, 2003, Japan.

(2007) Thermodynamic Analysis of Thermoelectric Device. International Journal of EXERGY, 4 (2). pp. 168-179.

(2007) Laser Short-Pulse Heating of a Three Layer Assembly and the Seebeck Effect. Journal for Lasers in Engineering, 10. pp. 1-20.

(2007) A Hybrid, PDE-ODE Control Strategy for Intercepting an Intelligent, Well-Informed Target in a Stationary, Cluttered Environment. Applied Mathematical Sciences, 1 (48). pp. 2345-2371.

(2005) Robust, FFT-Based, Single Carrier, Multiuser, SDPSK/DPSK Block Demodulation in the Presence of Symbol Synchronization Jitter. Communications in Information and Systems, 5 (3). pp. 289-304.

(2002) Motion Planning in the Presence of Directional and Obstacle Avoidance Constraints Using Nonlinear Anisotropic, Harmonic Potential Fields: A Physical Metaphor. IEEE Transactions on Systems, Man, & Cybernetics, Part A: systems and humans, 32 (6). pp. 705-723.

(2004) Laser Short-Pulse Interaction With Gold: Budgeting of Energy Equation. Journal for Lasers in Engineering, 14 (3-4). pp. 229-246.

(2000) Constrained Motion Control Using Vector Potential Fields. The IEEE Transactions on Systems, Man, and Cybernetics, Part A: Systems and Humans, 30 (3). pp. 251-272.

(1995) Using Local Structure for the Reliable Removal of Noise from the Output of the LoG Edge Detector. IEEE Transactions on Systems, Man, & Cybernetics, 25 (2). pp. 328-337.

(1988) Comments on Frequency Determination of Weak Sinusoids Buried in Noise. IEEE Transactions on Instrumentation and Measurements, 37 (3). pp. 473-475.

(2000) Evaluation of transfer functions for punctured turbo codes. IEE Electronics Letters, 36 (9). pp. 805-807.

(2005) UWB through-the-Wall Propagation. IEE Proceedings on Microwave Antennas Propagation, 152 (6). pp. 581-588.

(2006) Pathloss and Time Dispersion Parameters for Indoor UWB propagation. IEEE Transactions on Wireless Communications, 5 (3). pp. 550-559.

(2006) Fork-Coupled Resonators for High Frequency Characterization of Dielectric Substrate Materials. IEEE Transactions on Instrumentation and Measurements, 55 (6). pp. 2216-2220.

(2008) Measurements of UWB through-the-wall propagation using spectrum analyzer and the Hilbert transform. Microwave and Optical Technology Letters, 50 (2). pp. 465-470.

(2003) A New Formulation for Characterization of Materials Based on Measured Transfer Function. IEEE Transactions on Microwave Theory and Technique, 51 (8). pp. 1946-1951.

(2000) Convergence Analysis of the Variable Weight Mixed-Norm LMS-LMF Adaptive Algorithm. In: 34th Annual, Asilomar Conference on Signals, Systems, and Computers, Pacific Grove, California.

(2000) Convergence Behavior of the Normalized Least Mean Fourth Algorithm. In: 34th Annual, Asilomar Conference on Signals, Systems, and Computers, Pacific Grove, California.

(2001) Performance of the Multilayer Perceptron-based DFE with Lattice Structure in Linear and Non-Linear Channels. In: 35-th Annual, Asilomar Conference on Signals, Systems, and Computers, Pacific Grove, California, USA.

(2002) A Variable Weight Mixed-Norm Adaptive Algorithm. In: IEEE International Conference on Acoustics Speech and Signal Processing (ICASSP), Orlando, Florida, USA.

(2000) Performance of Equalized I-Q 16 QAM in Frequency Selective Fading. In: The 11th International PIMRC 2000, London.

(2007) Beam Scanning Using Integrated Microstrip Ferrite Phase shifter. In: Progress in Applied Computational Electromagnetics (ACE), Italy.

(2006) Integrated Microstrip Feed Network for Phased Array Antenna. In: Progress in Electromagnetic Research Symposium (PIERS), Japan.

(2004) Effect of Cavity enclosure on the resonance characteristics of an inverted microstrip stacked patch antenna. In: Asia Pacific Microwave Conference (APMC), India.

(2003) Simple Design of a Compact Broadband Microstrip Antenna for Mobile Communication. In: IEEE Antenna and Propagation Symposium Digest (APS), USA.

(2001) Characteristics of Millimeter-wave Semiconductor Phase shifters. In: International Conference on Antennas and Propagation (IEE-ICAP), UK.

(2007) UWB Multipath Simulator based on TEM Horn Antenna. In: The 2nd International Conference on Wireless Broadband and Ultra Wideband Communications.

(2004) On the Positioning Capability of UWB Systems. In: 2nd IEEE-GCC Conference, Bahrain.

(2003) New Formulation for Evaluating Complex Permittivity of Low-Loss Materials. In: IEEE-APS, Columbus, Ohio.

(2007) "Low Complexity Adaptive Wireless Transmission Systems". The Mediterranean Journal of Electronics and Communications, 3 (1). pp. 148-153.

(2006) "Performance of Cavity Backed Inverted Microstrip Broadband Antenna". Indian Journal of Radio & Space Physics, 35. pp. 54-58.

(2004) “Iterative Spatial Sequence Estimator for Multi-Group Space Time Trellis Coded Systems”. VTC2004-Fall. 2004 IEEE 60th, 2. pp. 1353-1357.

(2004) “Spatial Sequence Estimator Based Decoding Algorithm for V-BLAST”. VTC2004-Fall. 2004 IEEE 60th, 3. pp. 1875-1879.

(2004) “Performance Evaluation of Decoding Algorithms for Multi-Layered STBC-OFDM System”. Signals, Systems and Computers, 2004, 1. pp. 1208-1212.

(2007) "Blind Adaptive Modulation Systems for Wireless Channels with Binary Feedback". Wiley Journal on Wireless Communications and Mobile Computing, 7 (3). pp. 257-266.

(2007) "Multiuser Diversity with Quantized Feedback". IEEE Trans. on Wireless Communications, 6 (1). pp. 330-337.

(2004) “Comparing Decoding Algorithms for Multi-Layer Space-Time Block Codes,”. SoutheastCon, 2004. Proceedings. IEEE. pp. 147-152.

(2004) “Iterative Joint and Interference Nulling/Cancellation Decoding Algorithms for Multi-Group Space Time Trellis Coded Systems,”. WCNC. 2004 IEEE, 4. pp. 2317-2322.

(2005) “Predicted performance of Magnetized Semiconductor Phase Shifters for Millimeter-wave Microstrip Array Antennas. IEEE Microwave and Wireless Components Letters (MWCL, 15 (11). pp. 790-792.

(2005) “Performance of Compact Integratable Broadband Antenna”. Electromagnetics, 25 (4).

(2003) “Studies of Field Coupling between Stacked Microstrip Patch Resonators and Design of Broadband Radiators". Scientific Journal of FACTS UNIVERSITATIS: Series of Mechanics, Aromatic Control and Robotics, 3 (15). pp. 1121-1125.

(2003) “Novel Semiconductor Phase Shifter for Millimeter-Wave Devices”. Microwave and Optical Technology Letters (MOTL), 39 (4).

(2000) "Millimeter-wave Semiconductor Two Port Network at 77K". International Journal for Applied Electromagnteics (IAJEM), 11. pp. 117-126.

(1998) “Split Frequencies in Planar Axisymmetric Gyroelectric Resonators”. IEEE Trans. on Microwave Theory and Techniques (MTT), 46 (1). pp. 62-69.

(1995) “Frequency/Bias-field Mode Charts for Gyrotropic Waveguides". Microwave and Optical Technology Letters, 10 (4). pp. 201-204.

(2005) Investigation Into The Seebeck Coefficient in Two-Layer Assembly During Laser Short-Pulse Heating. Japanese Journal of Applied Physics, 44 (8). pp. 6068-6074.

(1998) "maximum Likelihood Estimate for Two-Variables Fractal Surface". IEEE Trans. Image Processing, 7. pp. 1746-1753.

(0200) “Radial Basis Functions Neural Networks for Estimation of Global Solar Radiation”. Journal of International Solar Energy, 68 (2). pp. 161-168.

(2000) “Decision Feedback Equalizer using Radial Basis Functions Networks". J. king Saud Univ, 12. pp. 257-268.

(2008) " A micro-controller based soft-starter for residential air conditioners: harmonic analysis". COMPEL, 27 (5). (Submitted)

(2006) "A Simulator for Single Phase Induction Motor-Converter Performance". Series on Energy and Power Systems 2006, 2006. pp. 388-394.

(2005) "Segregated residential air conditioner load model behavior with temperature and humidity". Series on Energy and Power Systems 2005, 2005. pp. 132-137.

(2004) "Neural Network Modeling Of Temperature and Humidity Effects On Residential |Air Conditioner Load". Energy and Power Systems 2004, 2004. pp. 557-562.

" Experimental harmonic investigation for residential Air-conditioner started by triac voltage controller". Elsevier Energy and Buildings. (Submitted)

"Sensorless Torque Estimation and Control of a Switched Reluctance Motor". Journal of Automatic Control and System Engineering (JACSE).. (Submitted)

(1999) "Corrective Schemes for Voltage Stability Using Different Indicators". Electric Machines and Power Systems, 27 (2).

(1999) "Short Term Load Forcasting Using Artificial Neural Networks". International Journal of Electric Power Systems Research.

(1996) "Voltage Stability and Real-Time Monitoring Using Expert Systems for Operation Assistance". IEEE Transaction on Power Systems, 11 (2). pp. 1037-1045.

(2004) Infostation Information Transfer using Hybrid ARQ Technique Combined with Adaptive Modulation. In: 4th IEEE International Symposium on Signal processing and Information Technology (ISSPIT'04), December 18-21, 2004, Rome, Italy.

(2005) Opportunistic Scheduling with Quantized Feedback in Wireless Networks. In: IEEE International Conf. on Information Technology: Coding and Computing (ITCC'05), April 4-6, 2005, Las Vegas, NV.

(2003) Effects of Electrode Spacing on the Response of Optically Controlled MESFETs. In: IEEE/LEOS international Conference on Numerical Simulation of semiconductor Optoelectronic Devices, Tokyo.

(2004) Blind adaptive modulation systems for wireless channels with binary feedback. In: IEEE Vehicular Technology Conf, September 26-29, 2004, Los Angels, CA.

(2003) Microwave Performance of Optically Controlled MESFETs. In: 10th IEEE International Conference on Electronics, Circuits and Systems, Sharjah.

(2007) Full-wave Solution of the Second Harmonic Generation Problem Using a Nonlinear FDTD Algorithm. In: PIERS, Prague, Czech Republic.

(2007) A Higher-order Accurate FDTD Solution to Scalar SHG Problems. In: PIERS, Prague, Czech Republic.

(2007) Bias and Geometrical Effects on Optically Controlled MESFETs. In: ELECO 2007, Bursa, Turkey.

(2007) On the Control Strategies of Shunt FACTS Devices for the Improvement of Transient Stability. In: 2nd Int. Conf. on Modeling, Simulation and Applied Optimization, ICMSAO, 2007, Abu Dhabi.

(2007) Dynamic Performance Improvement of an Isolated Wind Turbine Induction Generator. In: 4th IEEE-GCC Conference, Bahrain.

(2004) "Current-controlled sawtooth generator". Electronics World, 110. p. 45.

(2005) "Analogue CMOS, low-voltage, current-mode implementation of digital logic gates". Electronics World, 111 (1833). pp. 20-23.

(2004) "A current-mode logarithmic function circuit". Active and Passive Electronic Components, 27. pp. 183-187.

(2004) "Current-controlled sawtooth generator". Active and Passive Electronic Components, 27. pp. 155-159.

(2004) "A novel mixed-mode current-conveyor-based filter". International Journal of Electronics, 91. pp. 191-197.

(2004) "A low-cost dual-slope triangular/square wave generator". International Journal of Electronics, 91. pp. 185-190.

(2004) "Large signal analysis of wideband nonlinear amplifiers with harmonic injection". FREQUENZ, 58. pp. 32-36.

(2003) Large-signal analysis of triode vacuum-tube amplifiers,. Journal of the Audio Engineering Society, 51. pp. 1046-1053.

(2003) "Harmonic and intermodulation performance of LDMOS transistors". FREQUENZ, 57. pp. 244-247.

(2003) "Large signal analysis of the dual-parallel electroabsorption modulator". Fiber and Integrated Optics, 22. pp. 333-342.

(2003) "A novel mixed-mode current-contrlled current-conveyor-based filter". Active and Passive Electronic Components, 26. pp. 185-191.

(2003) "Function generator based on current conveyors". Electronics World, 109. pp. 43-44.

(2003) "A novel mixed-mode OTA-C filter". FREQUENZ, 57. pp. 157-159.

(2004) "A novel mixed-mode CCII-based filter". Active and Passive Electronic Components, 27. pp. 197-205.

(2005) "A new polyphase mixed-mode bandpass filter section using current-feedback operational amplifiers". WSEAS Transactions on Electronics, 4. pp. 128-131.

(2005) "A new current-mode current-controlled current-conveyor based universal filter". WSEAS Transactions on Electronics, 4. p. 153.

(2006) "Large signal analysis of wideband non-linear amplifiers with sum and difference frequency injection". International Journal of Electronics, 93. pp. 493-510.

(2006) "A CMOS analog cell and its applications in analog signal processing". International Journal of Electronics, 93. pp. 251-267.

(2006) "A novel single-capacitor, single-current-conveyor, sinusoidal oscillator". Electronics World, 133. pp. 53-54.

(2006) "A reconfigurable Gaussian/Triangular basis functions computation circuit". Analog Integrated Circuits and Signal Processing, 47. pp. 53-64.

(2006) "Large signal analysis of differential triode tube amp". audioXpress, 37. p. 59.

(2005) "A new polyphase filter using programmable-gain current-controlled current-conveyor". WSEAS Transactions on Electronics, 4. pp. 153-156.

(1992) Inverter switching patterns using a neural network. In: IEEE Southeastcon 92.

(1992) DESIGN AND SIMULATION OF CURRENT REGULATORS FOR INDUCTION MOTORS USING THE ERROR MAGNITUDE VOLTAGE VECTOR CORRECTION (EMVVC). In: Seventh Annual Applied Power Electronics Conference and Exposition.

(2003) Design of TE-Pass Reflection Mode Optical Polarizer. In: 10th IEEE International Conference on Electronics, Circuits and Systems.

(2003) Punctured Turbo codes Based ARQ Schemes in Rayleigh Fading. In: International Symposium on Wireless Systems and Networks (ISWSN’03).

(2003) Analysis of TM-Pass Reflection Mode Optical Polarizer Using Method of Lines. In: 10th IEEE International Conference on Electronics, Circuits and Systems.

(2005) A Threshold-Based Generalized Selection Combining Scheme in Nakagami Fading Channels. In: ISWSN05.

(2003) Modified Algorithm for Soft Decision Decoding of Product Codes. In: IEEE-GCC 2003.

(2004) ADSL Technology, Market and Future. In: International Conference on Communications and IT.

(2003) ADSL: the fastest growing broadband Technology. In: e-CETEM 2003.

(2004) CMOS highly linear fully differential current conveyor. Electronic Letters, 40 (4). pp. 214-216.

(2002) A buffer-Based Baseband Analog Front End for CMOS Bluetooth Receivers. IEEE Transactions on Circuits and Systems II: Analog and Digital Signal Processing, 49 (8). pp. 545-554.

(2002) A CMOS highly linear channel select filter for 3G muli-standard integrated wireless receivers. IEEE Journal of Solid State Circuits, 37 (1). pp. 27-37.

(2002) A CMOS highly linear channel select filter for 3G multi-standard integrated wireless receivers. IEEE Journal of Solid State Circuits, 37 (1). pp. 27-37.

(2002) A CMOS Fully balanced four-terminal floating nullor. IEEE Transactions on Circuits and Systems I: Fundamental Theory and Applications, 49 (4). pp. 413-424.

(2001) A new generation of global wireless compatibility. IEEE Circuits & Devices, 17 (1). pp. 7-19.

(2001) A CMOS Fully balanced differential difference amplifier and its applications. IEEE Transactions on Circuits and Systems II: Analog and Digital Signal Processing, 48 (6). pp. 614-620.

(2000) CMOS baseband filter for WCDMA integrated wireless recievers. Electron. Letters, 36 (18). pp. 1515-1516.

(2000) Digitally tuned analogue integrated filters using R-2R ladder. Electronic Letters, 36 (15). pp. 1278-1280.

(2000) CMOS fully differential second generation current conveyor. Electronic Letters, 36 (13). pp. 1095-1096.

(2003) A CMOS fully balanced second-generation current conveyor. IEEE Transactions on Circuits and Systems II: Analog and Digital Signal Processing, 50 (6). pp. 278-287.

(2007) "signal performance of micromachined silicon inductive microphones". Applied Acoustics, 68. pp. 1286-1296.

(2006) "Large signal analysis of multiquantum well electroabsorption modulators". Fiber and Integrated Optics, 25. pp. 75-86.

(2006) "Comment: Nonlinear SNR amplification of harmonic signal in noise". Electronics Letters, Vol. 42, 2006, p.123, 42. p. 123.

(2005) "A reconfigurable SATLIN/SIGMOID/Gaussian/Triangular basis functions computation circuit". Journal of Iranian Association of Electrical and Electronic Engineers, 2 (2). pp. 17-34.

(2005) "Analysis of the effect of radio frequency interference on the DC performance of CMOS operational amplifiers". , Analog Integrated Circuits and Signal Processing, 45. pp. 123-130.

(2005) "A current conveyor-based relaxation oscillator as a versatile electronic interface for capacitive and resistive sensors". International Journal of Electronics, 92. pp. 473-477.

(2005) "A novel mixed-mode OTA-C universal filter". International Journal of Electronics, 92. pp. 375-383.

(2005) "Large-signal analysis of class-A vaccum triode push-pull output stage". Journal of the Audio Engineering Society, 53. pp. 509-517.

(2005) "Large signal analysis of the SiGe HBT translinear harmonic mixer". International Journal of Electronics, 92. pp. 341-346.

(2000) CMOS digitally programmable filter for multi-standard wireless recievers. Electronic Letters, 36 (2). pp. 133-135.

(2005) "Simulation of mutually coupled circuit using plus-type CCIIs". International Journal of Electronics, Vol. 92, 2005, pp.49-54, 92. pp. 49-54.

(2005) "A translinear circuit for sinusoidal frequency division". IEEE Transactions on Instrumentation and Measurement, 54. pp. 10-14.

(2004) "Large signal performance of the electroabsorption modulator". Fiber and Integrated Optics, 23. pp. 467-476.

(2004) "A current-mode circuit for analogue synthesis of some special functions". International Journal of Electronics, 91. pp. 653-663.

(2007) "Harmonic and intermodulation performance of the semiconductor bolometer". International Journal of Infrared and Millimeter Waves, 28. pp. 741-749.

(2007) "Large signal performance of micromachined silicon condenser microphones". Applied Acoustics, 68. pp. 616-627.

(2007) "Harmonic and intermodulation performance of class-AB stages". International Journal of Electronics, 94. pp. 303-315.

(2005) "Large-signal performance of the serially cascaded electroabsorption modulator". Fiber and Integrated Optics, 24. pp. 129-145.

(2007) "A novel current-mode OTA-C universal filter". Electronics World, 113. pp. 45-56.

(1999) Artificial Neural Networks as Applied to Long-Term Demand Forecasting. Journal of Artificial Intelligence in Engineering, 13 (2). pp. 189-197.

(1997) A Transient Stability Assessment Using Artificial Neural Networks. Electric Power Systems Research, 40 (1). pp. 7-16.

(1995) Optimal Shunt Compensators at Nonsinusoidal Busbars. IEEE Transactions on Power Systems, 10 (2). pp. 716-723.

(1994) Electric Network Interconnection of Mashreq Arab Countries. IEEE Power Engineering Review, 14 (12). pp. 26-28.

(1994) Power System Harmonic Estimation: A Comparative Study. Electric Power System Research, 29 (2). pp. 91-97.

(2008) A cost effective development of an ultrasonic A-scans database for high-temperature hydrogen attack. NDT & E International, 41 (3). pp. 163-168.

(2007) Flaw impulse response estimation in ultrasonic non-destructive evaluation using bi-cepstra. NDT & E International, 40 (1). pp. 57-61.

(2001) Use of a Spreadsheet Program in Electromagnetics. IEEE Transactions on Education, 44 (3). pp. 292-297.

(1997) High-Order Spectra-Based Deconvolution of Ultrasonic NDT Signal for Defect Identification. Ultrasonics, 35 (7). pp. 525-531.

(1997) A Novel Defect Identification Scheme in Ultrasonic Non Destructive Evaluation. Ultrasonics, 35 (3). pp. 251-259.

(1997) Three-dimensional imaging using a new synthetic aperture focusing technique (SAFT). IEEE Transactions on Ultrasonics, Ferroelectrics and Frequency Control, 44 (4). pp. 943-947.

(1996) Time Domain Automatic Focusing of an Applebaum Array. International Journal of Imaging Systems and Technology, 7 (3). pp. 224-226.

(1993) Removal of the Finite-Distance Source Effects on the Applebaum Array. IEEE Transactions on Antennas and Propagation, 41 (8). pp. 1038-1044.

(1981) Depth of field improvement in long wavelength imaging systems. Electronic Letters, 17 (22). pp. 860-862.

(1971) Optimal Excitation Control for Power System Stability. IEEE Transactions Automatic Control, Ac-16 (4). pp. 379-381.

(2007) A noveltime-domain technique for nonparaxial ultra short optical pulses. Microwave and Optical Technology Letters, 49 (10). pp. 2481-2486.

(2007) A Novel Nonparaxial Time-Domain Beam-Propagation Method for Modeling Ultrashort Pulses in Optical Structures. Journal of Lightwave Technology, 25 (10). pp. 3175-3184.

(2007) A Stable Time-Domain Beam Propagation Method for Modeling Ultrashort Optical Pulses. IEEE PHOTONICS TECHNOLOGY LETTERS,, 19 (10). pp. 786-788.

(2005) IR laser ablative desulfurization of poly(1,4-phenylene sulfide). Journal of Analytical and Applied Pyrolysis, 73 (1). pp. 145-149.

(2005) “Bit Error Rate Performance Analysis of a Threshold-Based Generalized Selection Combining Scheme in Nakagami Fading Channels”. EURASIP Journal on Wireless Communications and Networking, 2. pp. 242-248.

(1999) Three-dimensional modeling of etched groove separation of adjacent optical waveguides. Microwave and Optical Technology Letters (MOTL), 23 (5). pp. 289-291. ISSN 0895-2477

(1991) A computerized system for beam measurements and control at the KFUPM 350 kV ion accelerator. Nuclear Instruments and Methods in Physics Research Section A: Accelerators, Spectrometers, Detectors and Associated Equipment, 301 (3). pp. 489-496.

(1996) Electromagnetic wave effects on microwave transistors using afull-wave time-domain model. Microwave Theory and Techniques, IEEE Transactions on, 44 (6). pp. 799-808. ISSN 0018-9480

(1997) A PARALLEL IMPLEMENTATION OF A TWO-DIMENSIONAL HYDRODYNAMIC MODEL FOR MICROWAVE SEMICONDUCTOR DEVICE INCLUDING INERTIA EFFECTS IN MOMENTUM RELAXATION. International Journal of Numerical Modelling: Electronic Networks, Devices and Fields, 10 (2). pp. 107-119.

(1999) A PML-FDTD formulation for the simulation of optical structures. Microwave and Optical Technology Letters (MOTL), 22 (5). pp. 355-358. ISSN 0895-2477

(1999) FDTD simulation of antenna coating effects on the radiation properties of cellular phones. Microwave and Optical Technology Letters (MOTL), 23 (1). pp. 52-54. ISSN 0895-2477

(2003) "Performance of Turbo Codes with Matrix Interleavers". Journal for Science and Engineering (AJSE), 28 (2B). pp. 211-220.

(2000) Energy model for optically controlled MESFETs. Microwave and Optical Technology Letters (MOTL), 26 (1). pp. 48-52. ISSN 0895-2477

(2001) An explicit finite-difference scheme for wave propagation in nonlinear optical structures. Applied Mathematics Letters, 14 (3). pp. 297-302.

(2000) A time-domain algorithm for the analysis of second-harmonicgeneration in nonlinear optical structures. Photonics Technology Letters, IEEE, 12 (4). pp. 395-397. ISSN 1041-1135

(2002) “A Novel Approach for Evaluating the Performance of SPC Product Codes Under Erasure Decoding”. IEEE Transaction on Communications, 50 (1). pp. 7-11.

(2000) “A Hybrid ARQ/FEC Scheme for Noisy ATM Network Links”. Journal of High Speed Networking, 9 (3,4). pp. 261-272.

(1997) Optimal Chip Waveforms for DS-CDMA with Generalized OQPSK Modulation. European Transactions on Telecommunications, 8 (5). pp. 527-536.

(1999) DS-CDMA Chip Waveform Design for Minimal Interference under Bandwidth, Phase and Envelope Constraints. IEEE Transactions on Communications, 47 (11). pp. 1737-1746.

(2002) Effects of Filtering and Hard Limiting on the Error Performance of DS-CDMA with OQPSK-type Modulation. IEEE Transactions on Vehicular Technology, 51 (5). pp. 1145-1152.

(2002) On The Accuracy of Gaussian Approximations in the Error Analysis of DS-CDMA Systems with OQPSK Modulation. IEEE Transactions on Communications, 50 (12). pp. 2064-2071.

(2004) Minimization of Tracking Jitter in CDMA PN Code Tracking. IEE Electronic Letters, 40 (21). pp. 1352-1353.

(2006) Semi-Random LDPC Codes for CDMA Communication over Nonlinear Bandlimited Satellite Channels. International journal of satellite communications and networking, 24 (4). pp. 303-317.

(2002) “Puncturing effects on turbo codes”. IEE Proceedings- Communications, 149 (3). pp. 132-138.

(2005) A study on thermodynamic potential energy for magnetostrictive system. International Journal of Exergy, 2 (3). pp. 246-259.

(2004) Finite Element Modeling of Magnetostrictive Smart Structures. The Arabian Journal for Science and Engineering, 29 (1C). pp. 125-138.

(1998) Bundled Conductor Configuration Optimization for Compact Transmission lines Incorporating Electromagnetic Fields Management. Electric Power Systems Research, 44 (3). pp. 189-202.

(1997) Transmission Lines Magnetic Field Management Feasibility Under Cost Constraints. Electric Power Systems Research, 41 (1). pp. 43-65.

(1993) Microcontroller Based Multi-Language Clock-Calendar. IEEE Transactions on Consumer Electronics, 39 (4). pp. 847-852.

(2000) "Evaluation of transfer functions for punctured turbo codes". IEE Electronic Letters. pp. 805-806.

(1999) "Coding-Quantization Exchange for Constant Bit Rate Image Transmission over Wireless Channels”. Arabian Journal for Science and Engineering (AJSE), 24 (2C). pp. 115-124.

(1999) “Performance of ATM Networks under Hybrid ARQ/FEC Error Control Scheme”. IEEE/ACM Transaction on Networking, 7 (6). pp. 917-925.

(1996) "Reliability-throughput: optimisation for adaptive forward errorcorrection systems". IEE Proc.-Commun., 143 (6). pp. 341-346.

(2003) “Transmission-expansion planning based on a non-linear programming algorithm”. Applied Energy. pp. 169-177.

(2004) “Optical Microscopy of Water trees in underground HV Cables”. J. Microscopy and Analysis, 36. pp. 25-26.

(1999) MAGNETIC FIELD MANAGEMENT TECHNIQUES IN TRANSMISSION UNDERGROUND CABLES. Electric Power Systems Research, 48 (3). pp. 177-192.

(1999) IMPLEMENTATION OF SHIELDING PRINCIPLES FOR MAGNETIC FIELD MANAGEMENT OF POWER CABLES. Electric Power Systems Research, 48 (3). pp. 193-209.

MOSFET DC Circuit Analysis. [Teaching Resource] (Unpublished)

MOSFET I-V Characteristics. [Teaching Resource] (Unpublished)

The MOSFET as an Amplifier. [Teaching Resource] (Unpublished)

(2005) “On the Design of Variable Structure Load Frequency Controllers by Tabu Search Algorithm: Application to Nonlinear Interconnected Models”. Electric Power Components and Systems, 33. pp. 1253-1267.

(2005) “Application of Particle Swarm Optimization Algorithm for Optimal Reactive Power Planning”. J. of Control and Intelligent Systems. pp. 66-72.

(2005) "How Good are Electrical Diagnostic Tests to Predict Water Trees in HV Cables—An Evaluation using Optical Microscopy". Journal JEEEC, 56. pp. 31-35.

(2006) " Design of Variable Structure Stabilizer for a Nonlinesr Mode of SMIB System: Particle Swarm Approach". WSEAS Transactions on Power Systems. pp. 311-316.

(1998) POWER FREQUENCY ELECTROMAGNETIC FIELDS IN THE HOME. Electric machines and power systems, 26 (7). pp. 749-773.

(2006) "A Systematic Approach to Nuclear Microscopy of Water Trees for a Large Number of Field-aged HV Cable Samples". European Transactions on Electrical Power (ETEP), 16. pp. 49-62.

(2006) "Particle Swarm Based Design of Variable Structure Stabilizer for a Nonlinear Model of SMIB System". The Mediterranean Journal of Measurement and Control, MJMC. pp. 119-125.

(1998) ELECTROMAGNETIC FIELDS IN THE HOME. Electric Power Systems Research, 45 (2). pp. 73-89.

(2006) "Variable Structure Load Frequency Controller: Optimal Design and Chattering Reduction using Particle Swarm Optimization Algorithm". Journal of Electrical Engineering, 6.

(2007) "A Tabu Search Approach for the Design of Variable Structure Load Frequency Controller Incorporating Model Nonlinearities". JEEEC. pp. 264-270.

(1999) Occupational exposure assessment for power frequency electromagnetic fields. Electric Power Systems Research, 48 (3). pp. 151-175.

(1995) NULL STEERING IN SCANNED LINEAR ARRAYS BY ELEMENT POSITON PERTURBATIONS. International Journal of Electronics, 78 (4). pp. 743-757.

(2005) An Introduction to Reactive Power Compensation for Wind Farms. International Journal of Energy Technology and Policy, 3 (3). pp. 185-195.

(1999) “ Optimal Output Feedback Controller Based on Genetic Algorithms”. Electric Power System Research, 50. pp. 7-15.

(2002) Application of Artificial Intelligent Tools to The Transmission Expansion Problem. Electrical Power Systems Research, 62 (2). pp. 117-126.

(2000) “A Genetic Approach to the Identification of Linear Dynamical Systems with Static Nonlinearities”. International Journal of Systems Science, 31 (3). pp. 307-314.

(2003) “Nonlinear Model Predictive Control of a Multivariable Hammerstein Model Using Genetic Algorithms”. Ichem Transactions.

(2003) ”Use of Artificial Neural Networks as Process Analyzers”. AJSE.

(1999) "Use of PLS for the Development of Inferential Models". SAUDI ARAMCO Journal of Technology. pp. 49-55.

(2002) “Neural network based adaptive variable structure power system stabilizer”. Int. J. Electrical Power & Energy Systems. (Submitted)