Waqas, Khalid Muh (2013) Optimal Charging Strategies for Electric Vehicles Using Stochastic Programming. Masters thesis, King Fahd University of Petroleum and Minerals.

Awadallah, Qattan Niz (2013) Reliability Analysis of C-130 Turboprop Engine Components Using Artificial Neural Networks. Masters thesis, King Fahd University of Petroleum and Minerals.

Fahed Al-Shahrani, Rubayan (2013) Finite Element Modeling of Glass Fiber Reinforced Plastic Pipes Under Impact Loading. Masters thesis, King Fahd University of Petroleum and Minerals.

Fahad, Khleif Eqa (2013) Modified Corner Reflector Antenna Fed by a Printed Dipole on a Quarter Cylindrical Substrate. Masters thesis, King Fahd University of Petroleum and Minerals.

Fahd, Al-Mulhem (2013) Wide Area Damping Controller Design and Implementation. Masters thesis, King Fahd University of Petroleum and Minerals.

Yasin, Maganda Wa (2013) Development of Laser Induced Break Down Spectroscopy for Detection of Toxic Elements in Cosmetic Products. Masters thesis, King Fahd University of Petroleum and Minerals.

Menahi, Almutairi (2013) Modelling Wettabilityalteration During Immiscible Co2 Flooding Process. PhD thesis, King Fahd University of Petroleum and Minerals.

Assi, Khaled (2013) The Effect of Local School Traffic on Congestion of Urban Network. Masters thesis, King Fahd University of Petroleum and Minerals.

Mohammed, Alaamri Ja (2013) Baseline Monitoring of Selected Organochlorine Pesticides (ocps) and Organophosphorus Pesticides (opps) in the Arabian Gulf. Masters thesis, King Fahd University of Petroleum and Minerals.

Ahmed, Al-Homidy (2013) Improvement of Eastern Saudi Soils Utilizing Indigenous Industrial by-Products. PhD thesis, King Fahd University of Petroleum and Minerals.

Salman, Alsaba Mah (2013) Two Layers Peer-to-Peer (p2p) Domain Name System (dns). Masters thesis, King Fahd University of Petroleum and Minerals.

Faisal, Al-Ahmadi (2013) Synthesis, Characterization and Evaluation of (co)mos2 Hds Supported on Hollow Carbon Sphere for Desulfurization of Thiophene. Masters thesis, King Fahd University of Petroleum and Minerals.

Alawi, Al-Majid A (2013) Development of Analytical Methods for Trace Analysis of Organophosphorus Pesticides and Biogenic Amines in Food Samples. Masters thesis, King Fahd University of Petroleum and Minerals.

Abdullah, Al-Fadhly (2013) Fault Tolerant Mission Critical Wireless Sensor and Actor Networks. PhD thesis, King Fahd University of Petroleum and Minerals.

Akeem, Adesina Yu (2013) Flexural Analysis and Material Characterization of Laser Welded 316L Steel Blanks. Masters thesis, King Fahd University of Petroleum and Minerals.

Alsallout, Mohammed N (2013) Enhanced Hybrid Detection Scheme with Path Length Aware for Wireless Sensor Network. Masters thesis, King Fahd University of Petroleum and Minerals.

Wajih, Kazi Izzat (2013) Synthesis and Application of Some Ionic Polymers As Antiscalants and Components for Aqueous Two Phase Systems. PhD thesis, King Fahd University of Petroleum and Minerals.

Alhamoudi, Abdulaziz (2013) Congestion Management of Transmission Network Using Statcom. Masters thesis, King Fahd University of Petroleum and Minerals.

Aliyu, Ismaila Kayode (2013) Effect of Process Parameters on Microstructure and Properties of Spark Plasma Sintered Al-Sic Nanocomposites. Masters thesis, King Fahd University of Petroleum and Minerals.

Shahnawaz, Alam (2013) Alcrn Hard Coatings Deposited by Magnetron Sputtering - Scratch, Wear and Creep Behavior. Masters thesis, King Fahd University of Petroleum and Minerals.

Najmudeen, Sibaweihi (2013) Optmization and Sensitivityanalysis of Foam Assisted Water Alternating Gas (fawag). Masters thesis, King Fahd University of Petroleum and Minerals.

Adewale, Kareem Lat (2013) Improved Numerical Simulation of Wormhole Propagation in Carbonate Core During Acid Stimulation. Masters thesis, King Fahd University of Petroleum and Minerals.

Al-Qahtani, Arnan Jufa (2013) The Role of Nuclear Power in Diversifying Electricity Fuel. Masters thesis, King Fahd University of Petroleum and Minerals.

Ali, Khamis Moh (2013) Optimization of Drilling Parameters Using Specific Energy in Real-Time. PhD thesis, King Fahd University of Petroleum and Minerals.

Zeeshan, Alam (2013) Effect of Silver Coating and Doping of Iron and Cobalt on the Oxygen Perneability of La2nio4. Masters thesis, King Fahd University of Petroleum and Minerals.

Attia, Gadalla Mo (2013) A New Eor Method for Sandstone Reservoirs Using High Ph Chelating Agents. Masters thesis, King Fahd University of Petroleum and Minerals.

Ahmed, Nemit-Alla (2013) Applications of Oxy-Fuel Combustion Technology Into Gas Turbines Combustors and Ion Transport Membrane Reactors. PhD thesis, King Fahd University of Petroleum and Minerals.

M. Salhab, Anas (2013) Performance of Dual-Hop Relay Networks with Co-Channel Interference and Multipath Fading. PhD thesis, King Fahd University of Petroleum and Minerals.

Adewale, Ganiyu Sah (2013) Carbon Nanostructures Grown on 3-D Solid Structure for Methane Dry Reforming. Masters thesis, King Fahd University of Petroleum and Minerals.

Mohammed, Fahham (2013) Cooperative Spectrum Sensing Using Swarm Intelligence and Double Thresholds. Masters thesis, King Fahd University of Petroleum and Minerals.

Ghufran, Ahmed (2013) Neural Network Adaptive Control of Unmanned. Masters thesis, King Fahd University of Petroleum and Minerals.

Kaleem, Siddiqui O (2013) Performance Analysis of Solar Absorbing Fluids in Channel Flow, Incorporating Selective Surfaces. Masters thesis, King Fahd University of Petroleum and Minerals.

Amer, Bin Ziyad (2013) Nr Image Quality Assestment Using Ann. Masters thesis, King Fahd University of Petroleum and Minerals.

Anwar, Parvez Moh (2013) Improvement of Asphalt Performance Using Industrial Wastes. PhD thesis, King Fahd University of Petroleum and Minerals.

Naji, Dabwan You (2013) Development and Assessment of Solar-Assisted Gas Turbine Cogeneration System in Saudi Arabia. Masters thesis, King Fahd University of Petroleum and Minerals.

Zainelabdeen, Abdalla Ah (2013) Synthesis and Characterization of Mononuclear Platinum(ii) Complexes with Some Thione Ligands. Masters thesis, King Fahd University of Petroleum and Minerals.

Ali, Khan Yasse (2013) Embracing Model Transformations in Functional Requirements Specification. Masters thesis, King Fahd University of Petroleum and Minerals.

Yousif, Abdulla Mo (2013) Digital Out Crop Modeling of Hofuf Out Crop Via Integrating Lidar, Ground Penetrating Radar and Sedimentology, Eastern Province, Saudi Arabia. Masters thesis, King Fahd University of Petroleum and Minerals.

Charles Sadeq, Al-Hamouz (2013) Synthesis and Applications of Linear and Cross-Linked Ph-Resposnsive Polycarbo-, Polyphospho-and Polysulfobetaines. PhD thesis, King Fahd University of Petroleum and Minerals.

Mohamed Oqla, Nahar Khal (2013) Automatic Extraction of Arabic Sub-Word Units for Continuous Speech Recognition. PhD thesis, King Fahd University of Petroleum and Minerals.

Atig, Ahmad (2013) Identification of Discontinuous Sandstone Bodies by Direct Modeling: Risk Analysis for Well Planning. Masters thesis, King Fahd University of Petroleum and Minerals.

Mohammad Khaled, Al-Halwani (2013) Recognition of Arabic Online Handwritten Text Using Syntactical Techniques. Masters thesis, King Fahd University of Petroleum and Minerals.

Elsayed, Deif Samie (2013) Design of Programmable Wideband Microwave Feed Network. Masters thesis, King Fahd University of Petroleum and Minerals.

Hamad, Al-Sharidi (2013) Development of Visible Light Active Catalyst for Mtbe Removal From Ground Water. Masters thesis, King Fahd University of Petroleum and Minerals.

Wajeeh, Mukhaimer (2013) Characterization of Oil-Water Flow in Horizontal Pipes. Masters thesis, King Fahd University of Petroleum and Minerals.

Abdullah Nagi, Al-Swat Ab (2013) Removal of Thiophene and Benzothiophenes From Diesel by Metal-Oxide Based Sorbents. Masters thesis, King Fahd University of Petroleum and Minerals.

Al-Abdul-Mohsin, Rami Ahmad (2013) Effect of Natural Fractures on the Pressure Transient Behavior of Multilayered Reservoir. Masters thesis, King Fahd University of Petroleum and Minerals.

Zafar, Khan Sarma (2013) Investigation of Wormhole Penetration in Carbonate Rocks Under High Pressure. Masters thesis, King Fahd University of Petroleum and Minerals.

Patrick, Ajayi Bada (2013) Oxidative Dehydrogenation of N-Butane Over Chromium and Vanadium Supported Catalysts with Co2 As Mild Oxidant. Masters thesis, King Fahd University of Petroleum and Minerals.

Abdullah, Al-Yaari M (2013) Pressure Drop Reduction of Stable Water-in-Oil Emulsion Flow in Pipes. PhD thesis, King Fahd University of Petroleum and Minerals.

Saleh, Bageri Ali (2013) Experimental Study on the Alkaline-Surfactant-Gas (asg) Flooding in a Carbonate Reservoir. Masters thesis, King Fahd University of Petroleum and Minerals.

Hamza Abbas, Hamza Asma (2013) Removal of Phenolic Compounds From Water Using Nano and Micro Carbon Materials. Masters thesis, King Fahd University of Petroleum and Minerals.

Babatunde, Asafa Tesl (2013) Development of Ultrathin Poly-Sige As a Structural Layer for Nanoelectromechanical Systems (nems). PhD thesis, King Fahd University of Petroleum and Minerals.

Ratib, Awayssa Om (2013) Catalytic Cracking of Vgo to Produce Olefins: Effect of Additives and Kinetics Modeling. Masters thesis, King Fahd University of Petroleum and Minerals.

Rashed, Zaro Fouad (2013) Efficient Techniques for Detection and Mitigation of Power Quality Events. PhD thesis, King Fahd University of Petroleum and Minerals.

Islam, Bhuiyan Ta (2013) Metathesis of Butene to Produce Propylene Over Mesoporous Tungsten Oxide Catalyst: Synthesis, Characterization and Kinetic Modeling. Masters thesis, King Fahd University of Petroleum and Minerals.

Abdul, Fasi Mohd (2013) "energy & Visual Comfort Performance of Smart Windows in Office Buildings in Hot Humid Climate". Masters thesis, King Fahd University of Petroleum and Minerals.

Abdalla, Musaad Has (2013) High Resolution Characterization and Modelling of an Arab-D Outcrop Analog, Central Saudi Arabia. PhD thesis, King Fahd University of Petroleum and Minerals.

Ali, Alzahrani (2013) Operating Rooms Scheduling at Samso. Masters thesis, King Fahd University of Petroleum and Minerals.

Migdad El-Kheir, Shuaib Moh (2013) Seismic Attributes and Petrophysical Modelling of the Aradeiba-D Memeber, Muglad Rift Basin, Sudan. Masters thesis, King Fahd University of Petroleum and Minerals.

Zidan, Abdel-Gawa (2013) An Innovative Application of Chelating Agents for EOR in Carbonate Reservoirs. Masters thesis, King Fahd University of Petroleum and Minerals.

Hasan, Algohi Bas (2013) An Experimental and Numerical Study of Retrofitted Masonry Walls Under Cyclic Loading. PhD thesis, King Fahd University of Petroleum and Minerals.

Ali, Suliman Ya (2013) Planning-Based Approach for Automating Sequence Diagram Generation. Masters thesis, King Fahd University of Petroleum and Minerals.

Farid Abdulhadi, Issa Yazan (2013) Evluation of Variable Message Signs Impact on Congested Freeways. PhD thesis, King Fahd University of Petroleum and Minerals.

Ahmed, Alawsh Sal (2013) Evaluation of Compressed Sensing in UWB Systems with NBI. Masters thesis, King Fahd University of Petroleum and Minerals.

Muhammad, Sheraz (2013) Design and Impementation of Maximum Power Point Tracking of Photovoltaic System. Masters thesis, King Fahd University of Petroleum and Minerals.

Zabiullah, Syed (2013) Wear and Friction Behavior of Magnesium Based Nanocomposites. Masters thesis, King Fahd University of Petroleum and Minerals.

Sagir, Adamu (2013) Synthesis of Supported Metallocene Catalysts and Application to Copolymerization of Ethylene with 4-Methyl-1-Pentene. Masters thesis, King Fahd University of Petroleum and Minerals.

Abdullah Hamood, Luqman Ham (2013) Arabic Font Recognition. Masters thesis, King Fahd University of Petroleum and Minerals.

Emeka, Ogunronbi (2013) Synthesis and Kinetic Modeling of Ga-Containing Mfi Zeolite of Hierarchical Pore Architecture Used for Lower Alkane Aromatization. Masters thesis, King Fahd University of Petroleum and Minerals.

Barkah, Koesdwiady (2013) Invariance and Immersion Control Design for Unmanned Aerial Vehicle. Masters thesis, King Fahd University of Petroleum and Minerals.

Abushoshah, Mohammed Ahmed (2013) Three Problems in Nonconventional Coordinates Systems (conduction in a Sphroid, Conduction From a Torus, Flow in Semielliptic Tubes). Masters thesis, King Fahd University of Petroleum and Minerals.

Khurram, Masood (2013) Analysis of Contention Based Mac Protocols Under Multipath Fading and Resource Management. PhD thesis, King Fahd University of Petroleum and Minerals.

Alosta, Mohameed (2013) Reliability-Based Strength Prediction Model for Reinforced Concrete Corroded Columns and Beam-Columns. PhD thesis, King Fahd University of Petroleum and Minerals.

Alhaji, Labaran Ba (2013) Removal of Aqueous Phase Selenium Using Artificial and Solar Radiation Advanced Oxidation Processes. Masters thesis, King Fahd University of Petroleum and Minerals.

Ahmed, Mahemood S (2013) Design and Simulation of a Current-Mode Folding Amplifier and Its Application in Analog-to-Digital Converter. Masters thesis, King Fahd University of Petroleum and Minerals.

Ashraf, Ali (2013) Control of a Microgrid Through Energy Storage Devices Using Evolutionary and Neuro-Fuzzy Methods. Masters thesis, King Fahd University of Petroleum and Minerals.

Ahmed Ali, Thabet Abd (2013) Detoxification of Chlorinated Compounds Using Fluidic Microreactor with Gas Chromatography/mass Spectrometry. Masters thesis, King Fahd University of Petroleum and Minerals.

Abdullah, Bawazir Om (2013) Comparing Hydrocarbon Volume Between Lsa (laminated Sand Analysis) and Standard Techniques in Low Resistivity Sandstone Reservoirs. Masters thesis, King Fahd University of Petroleum and Minerals.

Ameen Mabrook, Bin Mohann (2013) Challenges Affecting the Implementation of Building Management Systems in Office Buildings. Masters thesis, King Fahd University of Petroleum and Minerals.

Dastagir, Khan Gulam (2013) Stablization of Linear Systems Over Markov Communication Channels. Masters thesis, King Fahd University of Petroleum and Minerals.

Mark, Nour Abdul (2013) Seismic Attributes and Advanced Computer Algorithm to Predict Formation Pore Pressure: Qalibah Formation of Northwest Saudi Arabia. Masters thesis, King Fahd University of Petroleum and Minerals.

Mohammed Abdulqader, Al-Jefri M (2013) Real-Word Error Detection and Correction in Arabic Text. Masters thesis, King Fahd University of Petroleum and Minerals.

Arafeh, Abdalrahma (2013) Iterative Heuristics For CMOL Hyprid CMOS/Nano Devices Cells Mapping. Masters thesis, King Fahd University of Petroleum and Minerals.

Baduraig, Abdullah M (2013) Solid-Liquid Mass Transfer From Spinning Sphere in Non-Newtonian Liquid. Masters thesis, King Fahd University of Petroleum and Minerals.

Ahmed, Binlaswd S (2013) Development of an Assessment Tool for Maintenance Management in Public Schools in Saudi Arabia. Masters thesis, King Fahd University of Petroleum and Minerals.

Abduljalil A.R, Qasem Naef (2013) Thermodynamic Analysis and Modeling Study of an Intermittent Solar Adsorption Refrigeration System. Masters thesis, King Fahd University of Petroleum and Minerals.

Ahmed, Al-Khulaif (2013) Polynomial Solutions of Differential Equations. Masters thesis, King Fahd University of Petroleum and Minerals.

Ibrahim, Almaraj Is (2013) Economic Production Quantity (epq) Model with Imperfect Quality During a Random Process Adjustment Period-Some Considerations. Masters thesis, King Fahd University of Petroleum and Minerals.

Salman, Alkharaa H (2013) Assesment of Uncertainity in Porosity Measurements Using Nmr and Conventional Logging Tools in Carbonate Reservoirs. Masters thesis, King Fahd University of Petroleum and Minerals.

Mubarak, Bahartha S (2013) A Model for Selecting Sustainable Exterior Wall Building Materials/products in Hot Humid Climate. Masters thesis, King Fahd University of Petroleum and Minerals.

Osama, Hasan (2013) Performance and Life Prediction Model for Photovoltaic Module: Effect of Encapsulant Constitutive Behavior. Masters thesis, King Fahd University of Petroleum and Minerals.

Hassan, Abdelhafiz (2013) Pre-Distortion of Nonlinear Power Amplifiers Using Particle Swarm Optimization. Masters thesis, King Fahd University of Petroleum and Minerals.

Muhammad, Abudari Al (2013) New Models in Inventory Control. Masters thesis, King Fahd University of Petroleum and Minerals.

Adewale, Suara Kabi (2013) Pressure Sensing in Vicinity of Leaks for Leak Detection. Masters thesis, King Fahd University of Petroleum and Minerals.

Humayun, Khan Adil (2013) Adaptive Equalization Based on Particle Swarm Optimization Techniques. Masters thesis, King Fahd University of Petroleum and Minerals.

Tunde, Okunrinjej (2013) Characterization of Gas-Oil Water in a Horizontal Pipeline. Masters thesis, King Fahd University of Petroleum and Minerals.

Alzahrani, Ibrahim Mohammed (2013) Simultaneous Extraction of Sulfur and Mercury From Fossil Fuels Combined with Flourescence Spectroscopy. PhD thesis, King Fahd University of Petroleum and Minerals.

Bilal, Numan Ahme (2013) Isolation Enhancement Techniques for Mimo Antenna Systems. Masters thesis, King Fahd University of Petroleum and Minerals.

Saeed Mohamoud, Baharoon A (2013) Development of a Multi-Criteria Model for Assessing the Potential of Buildings for Temporary Use As Flood Transitional Settlement Shelters in Yemen. Masters thesis, King Fahd University of Petroleum and Minerals.

Bin Makhashen, Galal Munassar (2013) Multimodal Biometric Recognition Using Bio-Inspired Optimization and Fuzzy Fusion. Masters thesis, King Fahd University of Petroleum and Minerals.

Hamedulla, Baig Mirza (2013) Stabilization of Networked Control Systems with Random Delays. Masters thesis, King Fahd University of Petroleum and Minerals.

Haris M., Haris M. K (2013) "Distributed Kalman Filtering". PhD thesis, King Fahd University of Petroleum and Minerals.

Abdulrahman, Al-Aghbari (2013) A Special Purpose Processor for IC Testing and Speed Characterization. Masters thesis, King Fahd University of Petroleum and Minerals.

Saleh, Alismail F (2013) Analysis and Rtds Implementation of Statcom for System Stability Enhancement. Masters thesis, King Fahd University of Petroleum and Minerals.

Abdulqaher, Al-Asli Mo (2013) An On-Chip All-Digital Configurable Clock Generator for ASIC's at Speed Testing. Masters thesis, King Fahd University of Petroleum and Minerals.

Yousuf, Jabbar Muh (2013) Effect of Brine Composition on Wettability Alteration of Carbonate Rocks in the Presence of Polar Compound. Masters thesis, King Fahd University of Petroleum and Minerals.

Imran, Ul-Haq (2013) A Novel High-Impact Phenotype Selection Method Using a Hybrid of Uac and Hmm. Masters thesis, King Fahd University of Petroleum and Minerals.

Ibrahim, Mohamed (2013) Signal Source Searching and tracking via Antenna Array beam steering on fixed wing UAVs for Communication link enhancement. Masters thesis, King Fahd University of Petroleum and Minerals.

Al-Kahsah, Khalid (2013) Management Framework of Software Product Line Engineering: a Real Option Perspective. Masters thesis, King Fahd University of Petroleum and Minerals.

Khalid, Yusuf Huma (2013) A Hybrid Two-Threshold Spectrum Sensing Agorithm. Masters thesis, King Fahd University of Petroleum and Minerals.

Akolade, Bakare Idr (2013) Controlled Size Mtt (zsm-23) Zeolites for Catalytic Cracking. Masters thesis, King Fahd University of Petroleum and Minerals.

Mumen, Diraneyya (2013) Incorporating Multiplication Into Digit-Recurrence Division and the Square Root to Calculate (axb)/d, Sqrt(axb). Masters thesis, King Fahd University of Petroleum and Minerals.

Muhammad, Al-Baset S (2013) Performance Evaluation of Cooperative Uplink Transmission in Wireless Mimo Systems. Masters thesis, King Fahd University of Petroleum and Minerals.

Hasan, Al-Muhamma (2013) Adaptive Fault in Power Systems Based on Synchronized Phasor Measurements. PhD thesis, King Fahd University of Petroleum and Minerals.

Abdulsalam, Al-Haidari (2013) Modelling and Mitigation of Economic Denial of Sustainability (edos) Attacks in Cloud Computing. PhD thesis, King Fahd University of Petroleum and Minerals.

Ahmed, Khan Saad (2013) Network Intrusion Detection Using Iterative Heuristics. Masters thesis, King Fahd University of Petroleum and Minerals.

Saif, Ahmad (2013) Anomaly Modelling and Detection for Smart Grid Communication Infrastructures. Masters thesis, King Fahd University of Petroleum and Minerals.

Raddad, Al-Malki A (2013) Development of Sorbent Materials to Remove Mercury From Liquid Hydrocarbons. PhD thesis, King Fahd University of Petroleum and Minerals.

Al-Wadiee, Waheed Ali (2013) Failure Forcast of Boeing 737 Bleed Air System Using Artificial Neural Network. Masters thesis, King Fahd University of Petroleum and Minerals.

Muhammad, Abu-Ras Ah (2013) Evaluating the Effect of Design-Bid-Build Delivery Method on Municipal Projects in Saudi Arabia. Masters thesis, King Fahd University of Petroleum and Minerals.

Muhammad, Abubakar D (2013) The Effect of Local Recycled Waste Material on the Physical Behaviour and Performance of Joint Filling and Water-Proofing Asphalt. Masters thesis, King Fahd University of Petroleum and Minerals.

Murtada Abdein, Ali Elhaj (2013) Effect of Sturation on Acoustics of Carbonates. Masters thesis, King Fahd University of Petroleum and Minerals.

Muhammad, Ajmal (2013) Seismic Evaluation And Retrofit Assessment of Multi-Story Structures Using Pushover Analysis (POA). Masters thesis, King Fahd University of Petroleum and Minerals.

Khaja, Moinuddin (2013) Mechanical Properties and Durability of Quaternary Cement Concretes. Masters thesis, King Fahd University of Petroleum and Minerals.

Oluwaseun, Kassim Mos (2013) The Role of Potential Determining Ions in Carbonate Rock - Seawater Interactions. Masters thesis, King Fahd University of Petroleum and Minerals.

Khwaja, Mohammad (2013) The Effect of Grain Growth Inhibitors to the Micro Structural and Mechanical Properties of WC-Co Nanocomposites. Masters thesis, King Fahd University of Petroleum and Minerals.

Abdul-Elah, Nooruddin (2013) Permeability Prediction Using Mercury Injection Capillary Pressure Data. Masters thesis, King Fahd University of Petroleum and Minerals.

Muhyedeen, Musah Ahme (2013) Degradation of Methyl Tertiary Butyl Ether Using UV/Titanium Dioxide and Carbon Nanotubes. Masters thesis, King Fahd University of Petroleum and Minerals.

Ahmed, Khan Irfan (2013) Power System Stability Enhancement Through Wide Area Measurements. Masters thesis, King Fahd University of Petroleum and Minerals.

Danish, Ahmed (2013) Retrofitting of Exterior Beam-Column Joints Using Cfrp. Masters thesis, King Fahd University of Petroleum and Minerals.

Mohammed, Omer (2013) Evaluation of Polymeric Materials As Loss Circulation Agents in Shallow Zones. Masters thesis, King Fahd University of Petroleum and Minerals.

Feras Mhd Moetaz, Chikh Ough (2013) A Generalized Modular Redundancy Scheme for Enhancing Fault Tolerance of Combinational Circuits. Masters thesis, King Fahd University of Petroleum and Minerals.

Haris, Khan Moham (2013) An Adaptive Optimum Smes Controller for Performance Enhancement of Pmsg Wind System. Masters thesis, King Fahd University of Petroleum and Minerals.

Hasan, Rashed Abd (2013) Efficient Computation of Distribution Function for Sum of Lognormal Random Variables and Application to CDMA data Network. Masters thesis, King Fahd University of Petroleum and Minerals.

Haris, Malik Muha (2013) Optimization of Impact Resistance of Composite Plates and Pipes. Masters thesis, King Fahd University of Petroleum and Minerals.

Abdullah, Bellegdi S (2013) Automatic Arabic Handwritten Check Recognition. Masters thesis, King Fahd University of Petroleum and Minerals.

Saeed, Babaqi Bad (2013) Heat Integration and Retrofitting Analysis of Arabian Light Crude Distillation Units. Masters thesis, King Fahd University of Petroleum and Minerals.

Mohammed, Alyazidi N (2013) 'Control and Estimation Over Unreliable Communications Networks. Masters thesis, King Fahd University of Petroleum and Minerals.

Salem, Al-Buraiki (2013) Leader Follower Slam Based Navigation and Fleet Management Control. Masters thesis, King Fahd University of Petroleum and Minerals.