Aerospace Engineering

(2010) LARGE EDDY SIMULATION OF THE FLOW AROUND BLUFF BODY WITH DRAG REDUCTION DEVICE. Masters thesis, King Fahd University of Petroleum and Minerals.

(2010) "Reconfigurable Flight Control of a Fighter Aircraft, with Wind Tunnel Study" by Bilal A. Siddiqui, April 2010. Masters thesis, King Fahd University of Petroleum and Minerals.

(2010) EXPERIMENTAL AND NUMERICAL STUDY OF OPEN-AIR ACTIVE COOLING. Masters thesis, King Fahd University of Petroleum and Minerals.

(2010) NUMERICAL INVESTIGATION OF MECHANISMS TO AID IN ENHANCING SURFACE HEAT TRANSFER FROM AND IMPINGING 2D HOT-AIR JET. Masters thesis, King Fahd University of Petroleum and Minerals.

Architectural Engineering and Construction Management

(2010) SUBCONTRACTING STRATEGY IN INDUSTRIAL PROJECTS. Masters thesis, King Fahd University of Petroleum and Minerals.

(2010) LIFE CYCLE COSTING FOR SELECTED STRUCTURAL MATERIALS FOR OFFSHORE PLATFORMS. Masters thesis, King Fahd University of Petroleum and Minerals.

(2009) A Methodology for Identifying Learning Activity Settings and User Needs In Educational Facilities. Masters thesis, King Fahd University of Petroleum and Minerals.

(2009) Factors Affecting the Implementation of the Saudi Building Code. Masters thesis, King Fahd University of Petroleum and Minerals.

Chemical Engineering

(2010) Rheology & Solid State Properties of Polyethylene/CNT Nanocomposites: Impact of CNT Characteristics and Surface Modification. PhD thesis, King Fahd University of Petroleum and Minerals.

(2010) Kinetics Study of Different Corrosion Inhibitors for 1018 Carbon Steel in Seawater. Masters thesis, King Fahd University of Petroleum and Minerals.

(2010) DEVELOPMENT AND INVESTIGATION OF ENVIRONMENTALLY DEGRADABLE PLASTIC BAGS IN SAUDI ARABIA. PhD thesis, King Fahd University of Petroleum and Minerals.

(2010) ETHYLATION OF BENZENE OVER DIFFERENT ZEOLITE CATALYSTS. Masters thesis, King Fahd University of Petroleum and Minerals.

Chemistry

(2010) Electrochemical Investigation and Analytical Determination of Nucleic Acid Constituents at Different Carbon Composite Electrode Surfaces. Masters thesis, King Fahd University of Petroleum and Minerals.

(2010) Total Synthesis of Bioactive Natural Products. Masters thesis, King Fahd University of Petroleum and Minerals.

(2010) Synthesis of Ionic Polymers for Proton Exchange Membrane Fuel Cells and Viscosity Modifications. PhD thesis, King Fahd University of Petroleum and Minerals.

(2010) synthesis of polyisoxazolidines as potential corrosion inhibitors. Masters thesis, King Fahd University of Petroleum and Minerals.

(2009) SYNTHESIS OF NEW GOLD(III) COMPLEXES WITH ALKYLDIAMINE AND CYANIDE LIGANDS AND THEIR INTERACTION WITH SOME BIOLOGICALLY IMPORTANT LIGANDS. PhD thesis, King Fahd University of Petroleum and Minerals.

(2010) asymmetric induction in 1,3-dipolar cycloaddition using chiral nitrones. PhD thesis, King Fahd University of Petroleum and Minerals.

(2010) PALLADIUM-CATALYZED ALKOXYCARBONYLATION AND AMINOCARBONYLATION OF TERMINAL ALKYNES: SYNTHESIS AND APPLICATIONS OF alpha,beta-UNSATURATED ESTERS AND AMIDES. COMPUTATIONAL STUDY OF THE REACTION MECHANISM. PhD thesis, King Fahd University of Petroleum and Minerals.

(2011) Synthesis and Characterization of New Binuclear Cu(I) Diimine and Phosphine Mixed Ligand Complexes: Catalytic Application in the Coupling of Phenylacetylene with Halobenzene. PhD thesis, King Fahd University of Petroleum and Minerals.

Civil and Environmental Engineering

(2010) PERFORMANCE MODELING OF SAUDI ARAMCO ROADS NETWORK. Masters thesis, King Fahd University of Petroleum and Minerals.

(2010) Photocatalytic Treatment of Aqueous Phase Pollutants using Modified TiO2. Masters thesis, King Fahd University of Petroleum and Minerals.

(2010) APPLICATION OF ARTIFICIAL INTELLIGENCE MODELS IN TRAFFIC FLOW PREDICTION AND TIME-OF-DAY BREAKPOINTS DETERMINATION. PhD thesis, King Fahd University of Petroleum and Minerals.

(2010) Effect of Electrodes Material on the Degradation of p-Cresol in Electrochemical Process. Masters thesis, King Fahd University of Petroleum and Minerals.

(2010) Durability Assessment of Joint Assembly for Fiberglass Resin Coated Concrete Cylinder Pipes. Masters thesis, King Fahd University of Petroleum and Minerals.

(2010) Electrochemical Oxidation of Phenol in Simulated Petrochemical Wastewaters Using Boron-Doped Diamond Electrodes: Investigation of Effect of NH4+, CN- and S2- Presence. PhD thesis, King Fahd University of Petroleum and Minerals.

(2010) Effect of Co32-, Hco3-, and So42- On the Degradation of Phenol in Electrochemical Oxidation Process. Masters thesis, King Fahd University of Petroleum and Minerals.

Computer Engineering

(2009) BGP based Solution for International ISP Blocking. Masters thesis, King Fahd University of Petroleum and Minerals.

(2010) Routing prediction for probabilistic mobility model using neural networks for ad-hoc networks. Masters thesis, King Fahd University of Petroleum and Minerals.

(2010) Recognition of Handwritten Arabic (Indian)Digits Using Abductive Network. Masters thesis, King Fahd University of Petroleum and Minerals.

(2010) Fault Tolerance Techniques for Sequential Circuits: a Design Level Approach. Masters thesis, King Fahd University of Petroleum and Minerals.

(2010) Handoff Performance for Voice over IP in WiMAX Networks. Masters thesis, King Fahd University of Petroleum and Minerals.

Electrical Engineering

(2010) LOW COMPLEXITY BLIND EQUALIZATION FOR SISO SYSTEMS WITH GENERAL CONSTELLATIONS. Masters thesis, King Fahd University of Petroleum and Minerals.

(2010) DESIGN AND ANALYSIS OF EBG-BASED LOW-PROFILE MICROSTRIP ANTENNAS FOR WIRELESS COMMUNICATIONS. Masters thesis, King Fahd University of Petroleum and Minerals.

(2010) Neural Network Based Detection of Partial Discharge in HV Motors. Masters thesis, King Fahd University of Petroleum and Minerals.

(2009) The Signed Regressor Least Mean Fourth (SRLMF) Adaptive Algorithm. Masters thesis, King Fahd University of Petroleum and Minerals.

(2010) Strategic Bidding For Load Serving Entity in Electricity Markets. Masters thesis, King Fahd University of Petroleum and Minerals.

(2010) Transmission Congestion Management. Masters thesis, King Fahd University of Petroleum and Minerals.

(2010) Design of an LTE Antenna for Mobile Communication. Masters thesis, King Fahd University of Petroleum and Minerals.

(2010) IMPACT OF WIND GENERATOR INFEED ON DYNAMIC PERFORMANCE OF A POWER SYSTEM. PhD thesis, King Fahd University of Petroleum and Minerals.

(2010) FUZZY BASED SIC MULTIUSER DETECTORS FOR WIRELESS CHANNELS. Masters thesis, King Fahd University of Petroleum and Minerals.

(2010) ILLUSTRATION OF DISTRIBUTED GENERATION EFFECTS ON PROTECTION SYSTEM COORDINATION. Masters thesis, King Fahd University of Petroleum and Minerals.

(2010) MULTI-OBJECTIVE OPTIMAL POWER FLOW IN DEREGULATED ENVIRONMENT. Masters thesis, King Fahd University of Petroleum and Minerals.

(2009) Nonlinear Predictive Control Using Particle Swarm Optimization: Applications to Power Systems. Masters thesis, King Fahd University of Petroleum and Minerals.

(2010) PERFORMANCE OF LAYERED STEERED SPACE-TIME CODES IN WIRELESS SYSTEMS. Masters thesis, King Fahd University of Petroleum and Minerals.

(2009) Performance of Multi-hop Ad-hoc Networks in Wireless Environments. Masters thesis, King Fahd University of Petroleum and Minerals.

(2009) The Leaky Least Mean Fourth Algorithm. Masters thesis, King Fahd University of Petroleum and Minerals.

Geosciences

(2010) An Innovative Model-based Velocity Integration Procedure with an Application in Eastern Saudi Arabia. Masters thesis, King Fahd University of Petroleum and Minerals.

(2010) Characterization of the Hercynian Unconformity in Central and Eastern Saudi Arabia. Masters thesis, King Fahd University of Petroleum and Minerals.

Information and Computer Science

(2010) Graphical Processing Unit (GPU) Based 3D Seismic Sobel Edge Detection. Masters thesis, King Fahd University of Petroleum and Minerals.

(2010) Color Face Recognition Using Quaternion Principal Component Analysis (Q-PCA). Masters thesis, King Fahd University of Petroleum and Minerals.

(2010) Fingerprint Matching using Moments and Moment Invariants. Masters thesis, King Fahd University of Petroleum and Minerals.

(2010) Towards Design Patterns Definition Language (DPDL). Masters thesis, King Fahd University of Petroleum and Minerals.

(2010) A Comparative Analysis of Intelligent Techniques for Detecting Anomalous Internet Traffic. Masters thesis, King Fahd University of Petroleum and Minerals.

(2008) Software Metrics Definition Language. Masters thesis, King Fahd University of Petroleum and Minerals.

(2010) A Framework for Integration Specifications for Component-Based Software. Masters thesis, King Fahd University of Petroleum and Minerals.

(2010) CLASSIFICATION OF REFACTORING METHODS FOR ASPECT ORIENTED PROGRAMMING BASED ON SOFTWARE QUALITY ATTRIBUTES. Masters thesis, King Fahd University of Petroleum and Minerals.

(2010) A COMPREHENSIVE EMPIRICAL VALIDATION OF PACKAGE-LEVEL METRICS FOR OO SYSTEMS. Masters thesis, King Fahd University of Petroleum and Minerals.

(2009) New Approaches for Refactoring to Frameworks. Masters thesis, King Fahd University of Petroleum and Minerals.

(2010) SECURING BIOMETRIC DATA. Masters thesis, King Fahd University of Petroleum and Minerals.

Mathematics

(2010) Invariant Solutions, Double Reductions and Conservation Laws for Certain Evolution Equations. PhD thesis, King Fahd University of Petroleum and Minerals.

(2010) ASYMPTOTIC BEHAVIOUR OF SOLUTIONS OF SOME VISCOELASTIC PROBLEMS. Masters thesis, King Fahd University of Petroleum and Minerals.

(2010) HEAT CONDUCTION FROM TWO SPHERES. Masters thesis, King Fahd University of Petroleum and Minerals.

(2010) On a Generalized Fisher Equation. Masters thesis, King Fahd University of Petroleum and Minerals.

Mechanical Engineering

(2010) Effect of Sonication Time and Clay Loading on Nanoclay Dispersion, Tensile and Hardness Properties of Epoxy-Clay Nanocomposite. Masters thesis, King Fahd University of Petroleum and Minerals.

(2010) FINITE ELEMENT MODELING OF RING SPLITTING TEST TO PREDICT RESIDUAL STRESSES IN SPIRAL WELDED PIPE. Masters thesis, King Fahd University of Petroleum and Minerals.

(2010) Impact of Combined Mechanical Damage on the Integrity of Pipelines. PhD thesis, King Fahd University of Petroleum and Minerals.

(2010) A study of Mechanical Properties and Processability of Blown Films Using b-LLDPE and LDPE Blends. Masters thesis, King Fahd University of Petroleum and Minerals.

(2010) WATER WAVE PROPAGATION ON NONUNIFORM BOTTOM. Masters thesis, King Fahd University of Petroleum and Minerals.

(2010) PERFORMANCE ANALYSIS OF CHILLED WATER SYSTEMS AND THE EFFECT OF INCORPORATION OF EJECTOR COOLING SYSTEM. Masters thesis, King Fahd University of Petroleum and Minerals.

(2009) THERMAL ANALYSIS AND OPTIMIZATION OF ANNULAR FINS WITH SIMULTANEOUS HEAT AND MASS TRANSFER. Masters thesis, King Fahd University of Petroleum and Minerals.

(2009) Dynamic Modeling of Rotating Flexible Pipe Conveying Fluid and Subjected to External Axial Flow. PhD thesis, King Fahd University of Petroleum and Minerals.

(2010) THREE-DIMENSIONAL SIMULATION OF LASER GAS-ASSISTED CUTTING: JET IMPINGEMENT CONSIDERATIONS. PhD thesis, King Fahd University of Petroleum and Minerals.

(2009) EFFECT OF BLEND RATIO OF h-LLDPE WITH LDPE ON THE PROCESSABLITY AND THE MECHANICAL PROPERTIES OF BLOWN FILMS. Masters thesis, King Fahd University of Petroleum and Minerals.

Petroleum Engineering

(0015) NEW MODELS FOR ESTIMATING THE DEW-POINT PRESSURE OF GAS CONDENSATE RESERVOIRS. Masters thesis, King Fahd University of Petroleum and Minerals.

(2009) DETERMINATION OF MATRIX AND FRACTURE PERMEABILITIES IN WHOLE CORES USING PRESSURE PULSE DECAY. Masters thesis, King Fahd University of Petroleum and Minerals.

Physics

(2010) SYNTHESIS AND CHARACTERIZATION OF NANO- STRUCTURE METAL OXIDES AND PEROXIDES PREPARED BY LASER ABLATION IN LIQUIDS. Masters thesis, King Fahd University of Petroleum and Minerals.

lndustrial and Systems Engineering

(2010) Detection and Diagnosis of Plant-wide Oscillations. Masters thesis, King Fahd University of Petroleum and Minerals.

(2010) An Improved Active Contour Model for Medical Images Segmentation. Masters thesis, King Fahd University of Petroleum and Minerals.

(2010) Process Targeting for Multi-stage Production System: A Network Approach. Masters thesis, King Fahd University of Petroleum and Minerals.

(2009) Finance-Based Scheduling of Activity Networks. Masters thesis, King Fahd University of Petroleum and Minerals.

(2010) DETECTION AND COMPENSATION OF VALVE STICTION IN CONTROL LOOPS. Masters thesis, King Fahd University of Petroleum and Minerals.