Thesis

PERFORMANCE AND COST ANALYSES OF AN INTEGRATED SYSTEM OF M-CYCLE-BASED COOLING AND ABLUTION GREYWATER TREATMENT FOR MOSQUES IN HOT AND DRY CLIMATIC ZONES. Masters thesis, King Fahd University of Petroleum and Minerals.

AN INNOVATIVE AND PRACTICAL DEFINITION OF ENERGY EFFECTIVENESS FOR HUMIDIFICATION DEHUMIDIFICATION DESALINATION SYSTEMS. Masters thesis, King Fahd University of Petroleum and Minerals.

THE SIGNIFICANCE OF MODELING ELECTRODIALYSIS DESALINATION USING MULTI-COMPONENT SALINE WATER. Masters thesis, King Fahd University of Petroleum and Minerals.

Friction Stir Processing Effects on Fatigue Crack Propagation in Super Duplex Stainless Steel. Masters thesis, King Fahd University of Petroleum and Minerals.

Performance Analysis of Air Heated and Dual Heated Humidification-Dehumidification Cycles. Masters thesis, King Fahd University of Petroleum and Minerals.

Fatigue Analysis of Surface Pretreated Adhesively Bonded CFRP using FEM and X-Ray Tomography. Masters thesis, King Fahd University of Petroleum and Minerals.

THEORITICAL AND EXPERIMENTAL INVESTIGATIONS OF OIL-REFRIGERANT TWO-PHASE FLOW REFRIGERATION SYSTEM. PhD thesis, King Fahd University of Petroleum and Minerals.

INVESTIGATION OF ITM IN-SITU COMBUSTION FOR THERMAL ENHANCED OIL RECOVERY. PhD thesis, King Fahd University of Petroleum and Minerals.

FRACTURE ASSESSMENT OF NOTCHED 2099-T83 ALUMINUM-LITHIUM SPECIMENS UNDER TENSILE STATIC LOADING. Masters thesis, King Fahd University of Petroleum and Minerals.

DETECTION OF BLADE’S DEFECT USING BENDING VIBRATIONS OF A SHAFT IN A SHAFT-DISK-BLADE SYSTEM. Masters thesis, King Fahd University of Petroleum and Minerals.

MICROSTRUCTURE IMAGE-BASED MODELLING OF FAILURE IN THERMAL BARRIER COATINGS USING EXTENDED FINITE ELEMENT METHOD. Masters thesis, King Fahd University of Petroleum and Minerals.

Impact of friction stir processing on mechanical, microstructural, tribological and electrochemical properties of aluminum alloys. Masters thesis, King Fahd University of Petroleum and Minerals.

EFFECT OF THERMAL SPRAY COATING PROCESS PARAMETERS ON THE DEVELOPMENT OF RESIDUAL STRESSES IN CERAMIC COATINGS. Masters thesis, King Fahd University of Petroleum and Minerals.

Development and mechanical characterization of aluminum(Al) hybrid nanocomposite reinforced with alumina (Al2O3) and graphene oxide (GO). Masters thesis, King Fahd University of Petroleum and Minerals.

EXPERIMENTAL AND NUMERICAL INVESTIGATION INTO THE OXY-COMBUSTION CHARACTERISTICS OF PROPANE IN A SWIRL-STABILIZED, NON-PREMIXED COMBUSTOR. PhD thesis, King Fahd University of Petroleum and Minerals.

EFFECT OF HYDROGEN ENRICHMENT AND BURNER GEOMETRY ON OXY-METHANE COMBUSTION IN A MICROMIXER MODEL GAS-TURBINE COMBUSTOR. Masters thesis, King Fahd University of Petroleum and Minerals.

Holistic Approach for Assessing Sustainable Design of Consumer Products. Masters thesis, King Fahd University of Petroleum and Minerals.

DYNAMICS OF WATER DROPLET SPINNING AND ROLLING ON INCLINED SUPERHYDROPHOBIC WEDGED CHANNEL. Masters thesis, King Fahd University of Petroleum and Minerals.

ANALYTICAL MODELING OF A MULTISTAGE BUBBLE COLUMN HUMIDIFIER. Masters thesis, King Fahd University of Petroleum and Minerals.

APPLICATION FOCUSED DESIGN AND DEVELOPMENT OF POLYMER MATRIX COMPOSITES FOR THERMAL APPLICATIONS. PhD thesis, King Fahd University of Petroleum and Minerals.

IN-LINE GENERATION OF OIL-IN-WATER AND WATER-INOIL EMULSIONS. Masters thesis, King Fahd University of Petroleum and Minerals.

INFLUENCE OF FRICTION STIR PROCESSING ON MECHANICAL PROPERTIES AND CORROSION RESISTANCE OF UNS S32750 SDSS. Masters thesis, King Fahd University of Petroleum and Minerals.

NOVEL ASSESSMENT OF WALL THINNING IN STAINLESS STEEL ELBOW USING ELECTRIC FIELD MAPPING (EFM) SYSTEM. Masters thesis, King Fahd University of Petroleum and Minerals.

Exergo-economic Optimization of Concentrated Photovoltaic Thermoelectric Hybrid Generator. Masters thesis, King Fahd University of Petroleum and Minerals.

STATIC STABILITY AND COMBUSTION FEATURES OF C3H8/O2/CO2, C3H8/O2/N2 AND CH4/H2/O2/CO2 TURBULENT PREMIXED FLAMES IN A MODEL GAS TURBINE COMBUSTOR. Masters thesis, King Fahd University of Petroleum and Minerals.

Experimental and numerical study of hybrid Photovoltaic/thermal solar system using nanofluid optical filtration and nanoPCM. PhD thesis, King Fahd University of Petroleum and Minerals.

INTEGRATED MECHANICAL VAPOR COMPRESSION DESALINATION SYSTEM AND AIR-CONDITIONING SYSTEM. Masters thesis, King Fahd University of Petroleum and Minerals.

WATER DROPLET BEHAVIOR ON INCLINED DUSTY HYDROPHOBIC SURFACE: DUST CHARACTERISTICS AND DROPLET DYNAMICS. PhD thesis, King Fahd University of Petroleum and Minerals.

INFLUENCE OF NANO PARTICLE SIZE, SHAPE AND VOLUME CONCENTRATION ON THE PERFORMANCE OF FLAT PLATE SOLAR COLLECTOR. Masters thesis, King Fahd University of Petroleum and Minerals.

Doped 2D Transition Metal Dichalcogenides MoSe2 and MoTe2 as gas sensors. Masters thesis, King Fahd University of Petroleum and Minerals.

FATIGUE OF ADHESIVE-BONDED COMPOSITE JOINTS WITH LASER-BASED SURFACE TREATMENT. Masters thesis, King Fahd University of Petroleum and Minerals.

HYDROGEN FLUORIDE MODIFIED DUST FOR SELF-CLEANING APPLICATIONS. Masters thesis, King Fahd University of Petroleum and Minerals.

Mr. ISMAILA G. Kehinde. Masters thesis, King Fahd University of Petroleum and Minerals.

USE OF HYBRID NANOFLUID TO IMPROVE SOLAR STILL PERFORMANCE. Masters thesis, King Fahd University of Petroleum and Minerals.

Numerical Modeling for Performance Prediction of Standing Wave Thermoacoustic Systems. Masters thesis, King Fahd University of Petroleum and Minerals.

VIBROACOUSTIC CONTROL USING METAMATERIAL RESONATORS. Masters thesis, King Fahd University of Petroleum and Minerals.

Tribological Evaluation of Hybrid Nanocomposite Epoxy Coating System Based on Novel Fillers for Demanding Industrial Applications. Masters thesis, King Fahd University of Petroleum and Minerals.

Fatigue Behavior of Metallic Alloys of Different Microstructures. PhD thesis, King Fahd University of Petroleum and Minerals.

Heat and Mass Transfer for a Shallow Bubble Column Dehumidifier. Masters thesis, King Fahd University of Petroleum and Minerals.

Dynamic Analysis of periodic plates with localized resonators. Masters thesis, King Fahd University of Petroleum and Minerals.

Comparative study for Environmental Impacts of Laser Beam Welding, Friction Stir Welding and Gas Tungsten Arc Welding using Life Cycle Assessment. Masters thesis, King Fahd University of Petroleum and Minerals.

Experimental and Theoretical Investigation of HDH Desalination Systems by Thermodynamic Balancing. Masters thesis, King Fahd University of Petroleum and Minerals.