THE USE OF MAISOTSENKO CYCLE IN HOT-DRY CLIMATIC ZONE TO ACHIEVE A SUSTAINABLE AIR-CONDITIONING SYSTEM IN RIYADH. Masters thesis, King Fahd University of Petroleum and Minerals.

An innovative and practical definition of energy effectiveness for humidification dehumidification desalination systems. Masters thesis, King Fahd University of Petroleum and Minerals.

The significance of modeling electrodialysis desalination using multi-component saline water. Masters thesis, King Fahd University of Petroleum and Minerals.

Friction Stir Processing Effects on Fatigue Crack Propagation in Super Duplex Stainless Steel. Masters thesis, King Fahd University of Petroleum and Minerals.

Performance Analysis of an Air Heated and Dual Heated HDH Cycle. Masters thesis, King Fahd University of Petroleum and Minerals.

Fatigue Analysis of Surface Pretreated Adhesively Bonded CFRP using FEM and X-Ray Tomography. Masters thesis, King Fahd University of Petroleum and Minerals.

THEORETICAL AND EXPERIMENTAL INVESTIGATIONS OF OIL-REFRIGERANT TWO-PHASE FLOW REFRIGERATION SYSTEM. PhD thesis, King Fahd University of Petroleum and Minerals.

Investigation of ITM In-Situ combustion for thermal Enhanced Oil Recovery. PhD thesis, King Fahd University of Petroleum and Minerals.

FRACTURE ASSESSMENT OF NOTCHED 2099-T83 ALUMINUM-LITHIUM SPECIMENS UNDER TENSILE STATIC LOADING. Masters thesis, King Fahd University of Petroleum and Minerals.

Detection of blade faults using shaft-bending vibration analysis on a shaft-disk-blade system. Masters thesis, King Fahd University of Petroleum and Minerals.

Microstructure Image-Based Modelling of Failure in Thermal Barrier Coatings Using Extended Finite Element Method. Masters thesis, King Fahd University of Petroleum and Minerals.

Impact of friction stir processing on mechanical, microstructural, tribological and electrochemical properties of aluminum alloys. Masters thesis, King Fahd University of Petroleum and Minerals.

Effect of Coating Process Parameters on the Development of Residual Stresses. Masters thesis, King Fahd University of Petroleum and Minerals.

Development and Mechanical characterization of Aluminum hybrid nanocomposite reinforced with Alumina and Graphene oxide. Masters thesis, King Fahd University of Petroleum and Minerals.

Experimental and Numerical Investigation into the Oxy-Combustion Characteristics of Propane in a Swirl-Stabilized, Non-Premixed Combustor. PhD thesis, King Fahd University of Petroleum and Minerals.

EFFECT OF H2-ENRICHMENT AND BURNER GEOMETRY ON OXY-METHANE COMBUSTION IN A MICROMIXER MODEL GAS-TURBINE COMBUSTOR. Masters thesis, King Fahd University of Petroleum and Minerals.

Holistic Approach for Assessing Sustainable Design of Consumer Products. Masters thesis, King Fahd University of Petroleum and Minerals.

DYNAMICS OF WATER DROPLET SPINNING AND ROLLING ON INCLINED SUPERHYDROPHOBIC WEDGE CHANNEL. Masters thesis, King Fahd University of Petroleum and Minerals.

Analytical Modeling of a Multistage Bubble Column Humidifier. Masters thesis, King Fahd University of Petroleum and Minerals.

APPLICATION FOCUSED DESIGN AND DEVELOPMENT OF POLYMER MATRIX COMPOSITES FOR THERMAL APPLICAIONS. PhD thesis, King Fahd University of Petroleum and Minerals.

In-Line Generation of oil-in-water and water in oil emulsions. Masters thesis, King Fahd University of Petroleum and Minerals.

Influence of friction stir processing on mechanical properties and corrosion resistance of UNS S32750 SDSS. Masters thesis, King Fahd University of Petroleum and Minerals.

Novel Assessment of wall thinning in Stainless Steel Elbow using Electric Field Mapping (EFM) system. Masters thesis, King Fahd University of Petroleum and Minerals.

Exergo-economic analysis of hybrid concentrated photovoltaic thermoelectric generator. Masters thesis, King Fahd University of Petroleum and Minerals.

Static Stability and Combustion Features of C3H8/O2/CO2 and CH4/O2/CO2 Turbulent Premixed Flames in a Model Gas Turbine Combustor. Masters thesis, King Fahd University of Petroleum and Minerals.

Experimental and numerical study of hybrid Photovoltaic/Thermal solar system using nanofluid optical filtration and nanoPCM. PhD thesis, King Fahd University of Petroleum and Minerals.

Integrated Mechanical Vapor Compression Desalination System and Air-Conditioning System. Masters thesis, King Fahd University of Petroleum and Minerals.

WATER DROPLET BEHAVIOR ON INCLINED DUSTY HYDROPHOBIC SURFACE: Dust Characteristics and Droplet Dynamics. PhD thesis, King Fahd University of Petroleum and Minerals.

Influence of Nano Particle Size, Shape and Volume Concentration on The Performance of Flat Plate Solar Collector. Masters thesis, King Fahd University of Petroleum and Minerals.

Doped 2D Transitional Metal Dichalcogenides MoSe2 and MoTe2 as gas sensors. Masters thesis, King Fahd University of Petroleum and Minerals.

FATIGUE OF ADHESIVE-BONDED COMPOSITE JOINTS WITH LASER-BASED SURFACE TREATMENT. Masters thesis, King Fahd University of Petroleum and Minerals.

HYDROGEN FLUORIDE MODIFIED DUST FOR SELF CLEANING APPLICATIONS. Masters thesis, King Fahd University of Petroleum and Minerals.

Use of Hybrid Nano-fluid to improve Solar Still Performance. Masters thesis, King Fahd University of Petroleum and Minerals.

STUDY THE EFFECT OF CO2 SATURATED LIQUID IMPINGEMENT CORROSION/EROSION WITH AND WITHOUT SOLID PARTICLES ON PIPELINE GRADE API X65. Masters thesis, King Fahd University of Petroleum and Minerals.

NUMERICAL MODELING FOR PERFORMANCE PREDICTION OF STANDING WAVE THERMOACOUSTIC SYSTEMS. Masters thesis, King Fahd University of Petroleum and Minerals.

Vibroacoustic control using metamaterial resonators. Masters thesis, King Fahd University of Petroleum and Minerals.

Tribological evaluation of hybrid nanocomposite epoxy coating system based on novel fillers for demanding industrial applications. Masters thesis, King Fahd University of Petroleum and Minerals.

Fatigue Behavior of Metallic Alloys of Different Microstructures. PhD thesis, King Fahd University of Petroleum and Minerals.

HEAT AND MASS TRANSFER FOR A SHALLOW BUBBLE COLUMN DEHUMIDIFIER. Masters thesis, King Fahd University of Petroleum and Minerals.

Effect of Ru, Mn and Co dopants on the thermoelectric properties of TaFeSb half-Heusler from first principle. Masters thesis, King Fahd University of Petroleum and Minerals.

DYNAMIC ANALYSIS OF PERIODIC PLATES WITH LOCALIZED RESONATORS. Masters thesis, King Fahd University of Petroleum and Minerals.

Comparative study of Environmental Impacts of Laser, FSW, and TIG welding using Life Cycle Assessment. Masters thesis, King Fahd University of Petroleum and Minerals.

Optimization of HDH cycle performance. Masters thesis, King Fahd University of Petroleum and Minerals.