Aerospace Engineering

(2009) EFFECT OF BASE CAVITIES ON THE DRAG AND WAKE OF A TWO-DIMENSIONAL BLUFF BODY. Masters thesis, King Fahd University of Petroleum and Minerals.

Architectural Engineering and Construction Management

(2009) Decision Factors for Outsourcing the Maintenance Services of Saudi Universities. Masters thesis, King Fahd University of Petroleum and Minerals.

(2008) ENERGY-EFFICIENT WINDOW DESIGN THROUGH THE INTEGRATION OF DAYLIGHTING AND ARTIFICIAL LIGHTING IN OFFICE BUILDINGS. Masters thesis, King Fahd University of Petroleum and Minerals.

Chemical Engineering

(2009) REMOVAL OF LEAD & CHROMIUM FROM WATER BY USING MODIFIED & NONMODIFIED CARBON NANOTUBES. Masters thesis, King Fahd University of Petroleum and Minerals.

(2009) Dynamic Monte Carlo Simulation of Atom Transfer Radical Copolymerization. Masters thesis, King Fahd University of Petroleum and Minerals.

Surface Modification of AI Alloy 2014 by Electrochemical Deposition of Ni. corrosion.

(2008) Evaluation of Silicone Rubber Insulators used in High-Voltage Transmission Lines. Journal of Materials Engineering and Performance, 17(2).

Chemistry

(2009) Comparative evaluation of Dy(III) selective poly(vinyl) chloride based membrane electrodes of macrocyclic tetraimine Schiff’s bases. Talanta.

(2009) Drug Selective Poly (Vinyl chloride)-based Sensor of Desipramine Hydrochloride. Electrochimica Acta.

(2009) Development and applications of quaternary ammonium (QA) membrane electrodes in pharmaceutical preparation and in bioavailability of Prostaglandin E1 and Deoxycholate. ELECTROCHIMICA ACTA.

(2009) Adsorption of carmoisine A from wastewater using waste materials—Bottom ash and deoiled soya. Journal of Colloid and Interface Science.

(2009) Adsorption studies on the removal of coloring agent phenol red from wastewater using waste materials as adsorbents. Journal of Colloid and Interface Science.

(2009) Adsorptive removal of hazardous anionic dye ‘‘Congo red” from wastewater using waste materials and recovery by desorption. Journal of Colloid and Interface Science.

(2009) Adsorption studies on the removal of hexavalent chromium from aqueous solution using a low cost fertilizer industry waste material. Journal of Colloid and Interface Science.

(2009) Supramolecular Dynamics of Thalidomide and its Derivatives in Water-Sediment System. Wiley InterScience.

(2009) Comparative studies of neodymium (III)-selective PVC membrane sensors. Analytica Chimica Acta.

(2009) Comparative studies of praseodymium(III) selective sensors based on newly synthesized Schiff’s bases. Analytica Chimica Acta.

(2009) SEQUENTIAL INJECTION ANALYSIS (SIA) TECHNIQUE FOR THE ASSAY OF KETOCONAZOLE AND DICLOFENAC SODIUM IN DRUG FORMULATIONS WITH CHEMOMETRIC APPROACH. Masters thesis, King Fahd University of Petroleum and Minerals.

Corrosion of carbon steel caustic header in the presence of chloride ions. Engineering Failure Analysis.

(2009) Model System Desulfurization by Using Liquid-Liquid Extraction and Adsorption Techniques. Masters thesis, King Fahd University of Petroleum and Minerals.

(2009) Synthesis of Lamellarins and Related natural products. Masters thesis, King Fahd University of Petroleum and Minerals.

Civil and Environmental Engineering

(2009) Towards Optimal Design of Reinforced Concrete Structures for Corrosive Environments in Saudi Arabia. Masters thesis, King Fahd University of Petroleum and Minerals.

(2009) STABILIZATION/SOLIDIFICATION OF SOIL CONTAMINATED WITH HAZARDOUS WASTES. Masters thesis, King Fahd University of Petroleum and Minerals.

Compliance criteria for quality concrete. Construction and Building Materials.

Correlations between Depth of Water Penetration, Chloride Permeability, and Coefficient of Chloride Diffusion in Plain, Silica Fume, and Fly Ash Cement Concretes. Journal of Testing and Evaluation.

CORROSION OF FUSION-BONDED EPOXY COATED BARS IN CHLORIDE-CONTAMINATED PLAIN AND SiLICA FUME CEMENT CONCRETES EXPOSED TO VARYING TEMPERATURE. Structural Faults and Repair Conference.

Performance of plain and blended cements exposed to high sulphate concentrations. Advances in Cement Research.

Usage of cement kiln dust in cement products - Research review and preliminary investigations. Construction and Building Materials.

SULFATE AND ACID RESISTANCE OF MATERIALS FOR USE IN SEWAGE AND WASTEWATER TRANSPORT SYSTEMS IN SAUDI ARABIA - A REVIEW. Calcium Aluminate Cements: Proceedings of the Centenary Conference.

Application of Discrete and Continuous Wavelets for Saudi Arabian Meteorological Data Analysis. INDIAN JOURNAL OF INDUSTRIAL AND APPLIED MATHEMATICS.

(2009) Stabilization of Eastern Saudi Soils Using Heavy Fuel Oil Fly Ash and Cement Kiln Dust. Masters thesis, King Fahd University of Petroleum and Minerals.

(2009) EXPERIMENTAL INVESTIGATION AND MODELING OF PRESTRESSED PRECAST HOLLOW-CORE SLABS WITH A STRUT-AND-TIE MODEL. Masters thesis, King Fahd University of Petroleum and Minerals.

(2009) OPTIMIZATION OF CONTINUOUS POST-TENSIONED CONCRETE BRIDGE GIRDERS WITH VARIABLE DEPTH. Masters thesis, King Fahd University of Petroleum and Minerals.

Investigation of the electro-coagulation treatment process for the removal of total suspended solids and turbidity from municipal wastewater. BIORESOURCE TECHNOLOGY.

TRIHALOMETHANES (THMs) FORMATION IN A DISTILLATION PROCESS. Desalination.

PROPOSED MODIFICATIONS TO THE CIVIL ENGINEERING PROGRAM AT KFUPM TO FULFILL 2008-2009 ABET CRITERIA AND THE KFUPM PROGRAM REQUIREMENTS. PROPOSED MODIFICATIONS TO THE CIVIL ENGINEERING PROGRAM AT KFUPM TO FULFILL 2008-2009 ABET CRITERIA AND THE KFUPM PROGRAM REQUIREMENTS.

REASONS FOR TIRE EXPLOSION AND METHODS TO REDUCE ITS ASSOCIATED TRAFFIC ACCIDENTS. REASONS FOR TIRE EXPLOSION AND METHODS TO REDUCE ITS ASSOCIATED TRAFFIC ACCIDENTS.

Usage of Cement Kiln Dust in Cement Products – Research Review and Preliminary. Usage of Cement Kiln Dust in Cement Products – Research Review and Preliminary.

Evaluation of Foam Asphalt Technology for Road Bases Construction in the Gulf. In: Evaluation of Foam Asphalt Technology for Road Bases Construction in the Gulf.

Investigation of Sulfur Modified Asphalt Concrete Mixes for Road Construction in the Gulf. In: Investigation of Sulfur Modified Asphalt Concrete Mixes for Road Construction in the Gulf.

Behaviour Of Cfrp Strengthened Cantilever Hollow-Core Panels. In: Behaviour Of Cfrp Strengthened Cantilever Hollow-Core Panels.

Calculating Drying-Shrinkage Stresses – Readily Available Software Tools can be used for Analyses of Concrete Structures. In: Calculating Drying-Shrinkage Stresses – Readily Available Software Tools can be used for Analyses of Concrete Structures.

Finite Element Modeling of Prestressed Hollow Core Slab Strengthened with CFRP Sheets in Flexure and Shear. In: Finite Element Modeling of Prestressed Hollow Core Slab Strengthened with CFRP Sheets in Flexure and Shear.

Flexural Behavior of Precast, Prestressed Hollow-Core Concrete Slabs Strengthened by CFRP. In: Flexural Behavior of Precast, Prestressed Hollow-Core Concrete Slabs Strengthened by CFRP.

Moisture Transmissibility and Shrinkage of Water Proof Concretes. In: Moisture Transmissibility and Shrinkage of Water Proof Concretes.

Thermo-Hygral Analogue for Determination of Shrinkage Related Stresses in Concrete Structures. In: Thermo-Hygral Analogue for Determination of Shrinkage Related Stresses in Concrete Structures.

RBF METHOD FOR NAVIER STOKES EQUATIONS. In: RBF METHOD FOR NAVIER STOKES EQUATIONS.

MULTI-CRITERIA OPTIMAL DESIGN METHODOLOGY FOR DURABLE RC MEMBERS IN CORROSIVE ENVIRONMENTS –AN EXPERIMENTAL INVESTIGATION. In: MULTI-CRITERIA OPTIMAL DESIGN METHODOLOGY FOR DURABLE RC MEMBERS IN CORROSIVE ENVIRONMENTS –AN EXPERIMENTAL INVESTIGATION.

Computer Engineering

(2009) Transistor-Level Defect-Tolerant Techniques for Reliable Design at the Nanoscale. Masters thesis, King Fahd University of Petroleum and Minerals.

(2009) A STUDY ON CROSS LAYER OPTIMIZATION FOR APPLICATION SPECIFIC WIRELESS SENSOR NETWORKS. PhD thesis, King Fahd University of Petroleum and Minerals.

(2009) Hardware Online Multiplication-Division: A Design and Performance Study. Masters thesis, King Fahd University of Petroleum and Minerals.

(2011) INTRUSION DETECTION IN MOBILE AD-HOC NETWORK IMPLEMENTATION AND PERFORMANCE EVALUATION OF ADAPTIVE ACKNOWLEDGMENT APPROACH. Masters thesis, King Fahd University of Petroleum and Minerals.

(2009) CRITICAL INFRASTRUCTURE PROTECTION IN SAUDI ARABIA: A CASE STUDY ON PETROCHEMICAL INDUSTRY PROTECTION AGAINST TERRORIST ATTACKS AT JUBAIL INDUSTRIAL CITY (JIC). Masters thesis, King Fahd University of Petroleum and Minerals.

(2009) OPTIMIZING BACKOFF PROCEDURE FOR ENHANCED THROUGHPUT AND FAIRNESS IN WIRELESS LANs. Masters thesis, King Fahd University of Petroleum and Minerals.

Qualitative Evaluation of Computer-Aided Teleopearation. n Proc. of the 4th ACS/IEEE International Conference on Computer Systems and Applications (AICCSA-06), March 8-11, 2006, Dubai,Sharjah, UAE..

(2009) Improving Security and Capacity for Arabic Text Steganography Using 'Kashida' Extensions. In: The 7th ACS/IEEE International Conference on Computer Systems and Applications (AICCSA-2009), 10-13 May 2009, Rabat, Morocco.

(2009) Triple-A: Secure RGB Image Steganography Based on Randomization. In: The 7th ACS/IEEE International Conference on Computer Systems and Applications (AICCSA-2009), 10-13 May 2009, Rabat, Morocco.

Electrical Engineering

(2009) Variable Step-Size Least-Mean Fourth Algorithm of the Quotient Form. Masters thesis, King Fahd University of Petroleum and Minerals.

(2009) Quasi-Newton Least Mean Fourth Adaptive Algorithm. Masters thesis, King Fahd University of Petroleum and Minerals.

(2009) Power System Stability Enhancement Using Multi-Band Power System Stabilizers. Masters thesis, King Fahd University of Petroleum and Minerals.

(2009) EVALUATION OF DAMPING CONTROL OF A UNIFIED POWER FLOW CONTROLLER. Masters thesis, King Fahd University of Petroleum and Minerals.

(2009) Impacts of Distributed Generation on the Stability of Electrical Power Systems. Masters thesis, King Fahd University of Petroleum and Minerals.

(2008) A New Method for Identification of MIMO Hammerstein Model. Masters thesis, King Fahd University of Petroleum and Minerals.

Artificial neural network estimation of global solar radiation using air temperature and relative humidity. Energy Policy.

(2009) MICROWAVE FILTER DESIGN BY USING CONTINUOUSLY VARYING TRANSMISSION LINE (CVTL). Masters thesis, King Fahd University of Petroleum and Minerals.

(2008) Design and Performance of Interconnect-Efficient LDPC Codes with FPGA Implementation. Masters thesis, King Fahd University of Petroleum and Minerals.

(2009) DLL Code Tracking of CDMA Signals under Fading and Multiple Access Interference. Masters thesis, King Fahd University of Petroleum and Minerals.

(2008) ADAPTIVE ALGORITHMS FOR CHANNEL ESTIMATION: USING A PRIORI INFORMATION FOR OPTIMUM DESIGN. Masters thesis, King Fahd University of Petroleum and Minerals.

(2008) Opportunistic Scheduling with Limited Feedback in Wireless Communications Systems. Masters thesis, King Fahd University of Petroleum and Minerals.

Geosciences

(2009) Estimation of Reservoir Properties from Seismic Attributes and Well Log Data using Artificial Intelligence. Masters thesis, King Fahd University of Petroleum and Minerals.

(2009) Fracture Detection Using Azimuthal P-wave Amplitude Variation with Offset (AVOA) in a Carbonate Reservoir, Khurais Field, Saudi Arabia. Masters thesis, King Fahd University of Petroleum and Minerals.

(2009) DATA DRIVEN MAPPING AND ATTENUATION OF NEAR-SURFACE DIFFRACTORS. Masters thesis, King Fahd University of Petroleum and Minerals.

(2009) Fate of Bromate Formation in Water Treated by ozone-based Advanced Oxidation Processes. Masters thesis, King Fahd University of Petroleum and Minerals.

(2009) REMOVAL OF ARSENIC AND MERCURY FROM WATER USING MULTI-WALLED CARBON NANOTUBES. Masters thesis, King Fahd University of Petroleum and Minerals.

(2009) Controls on Hierarchy of Miocene Buildups within a High Resolution Cycle Stratigraphic Framework of Dam Formation, Lidam Area, Saudi Arabia. Masters thesis, King Fahd University of Petroleum and Minerals.

Information and Computer Science

(2009) Information Fusion in Multibiometric Systems. Masters thesis, King Fahd University of Petroleum and Minerals.

(2009) Arabic Database for Automatic Printed Arabic Text Recognition Research and Benchmarking. Masters thesis, King Fahd University of Petroleum and Minerals.

(2009) On Linux Performance of CPU-Bound Processes in the Presence of Network I/O. Masters thesis, King Fahd University of Petroleum and Minerals.

(2009) Software Quality Assessment using Ensemble Models. Masters thesis, King Fahd University of Petroleum and Minerals.

(2009) EMPIRICAL VALIDATION OF CLASS COUPLING METRICS AS CHANGEABILITY INDICATORS IN SOFTWARE EVOLUTION. Masters thesis, King Fahd University of Petroleum and Minerals.

(2009) Software Evolution Metrics for Object-Oriented Software Changeability Prediction. Masters thesis, King Fahd University of Petroleum and Minerals.

(2009) SOFTWARE REFACTORING USING PATTERN RECOGNITION TECHNIQUES. Masters thesis, King Fahd University of Petroleum and Minerals.

(2009) A Novel Hybrid Computational Intelligence Model for the Characterization of Oil and Gas Reservoirs. Masters thesis, King Fahd University of Petroleum and Minerals.

(2009) ADAPTIVE FUZZY LOGIC BASED FRAMEWORK FOR HANDLING IMPRECISION AND UNCERTAINTY IN PATTERN CLASSIFICATION OF BIOINFORMATICS DATASETS. Masters thesis, King Fahd University of Petroleum and Minerals.

(2009) COLOR IRIS RECOGNITION AND MATCHING USING QUATERNION GABOR WAVELETS. Masters thesis, King Fahd University of Petroleum and Minerals.

(2008) Classification of Refactoring Methods Based on Software Quality Attributes. Masters thesis, King Fahd University of Petroleum and Minerals.

Mathematics

(2009) Tilting and star module theory in commutative rings. PhD thesis, King Fahd University of Petroleum and Minerals.

(2009) STUDY OF INTERACTION BETWEEN VISCOELASTIC AND FRICTIONAL DAMPINGS IN WAVE EQUATIONS. Masters thesis, King Fahd University of Petroleum and Minerals.

Mechanical Engineering

(2009) Modeling, Analysis and Optimization of the Thermal Performance of Air Conditioners. Masters thesis, King Fahd University of Petroleum and Minerals.

(2009) EXPERIMENTAL AND NUMERICAL INVESTIGATION OF FLOW INDUCED VIBRATION IN A HIGH PRESSURE DOUBLE VOLUTE CENTRIFUGAL PUMP. PhD thesis, King Fahd University of Petroleum and Minerals.

(2009) A Continuum Model for Elastic Waves in Embedded Carbon Nanotube Composites. Masters thesis, King Fahd University of Petroleum and Minerals.

(2009) The Effect of Magnetic Field on Combustion and Emissions. Masters thesis, King Fahd University of Petroleum and Minerals.

Wind power potential assessment for three locations in Algeria. Renewable and Sustainable Energy Reviews.

Wind shear coefficient, turbulence intensity and wind power potential assessment for Dhulom, Saudi Arabia. Renewable Energy.

(2009) PARAMETRIC STUDY OF SHORT PERIODIC SPEED CONTROL HUMPS ON A ROAD VEHICLE DYNAMIC. Masters thesis, King Fahd University of Petroleum and Minerals.

(2005) FATIGUE BEHAVIOUR OF HIC DAMAGED LINE PIPE STEEL. Masters thesis, King Fahd University of Petroleum and Minerals.

(2009) Experimental Comparison of Calcium Sulfate (CaSO4) Scale Deposition on Coated Carbon Steel and Titanium Surfaces. Masters thesis, King Fahd University of Petroleum and Minerals.

(2009) FRICTION AND WEAR OF 20% VOLUME FRACTION SUBMICRON Al2O3/6061 ALUMINUM ALLOY COMPOSITE FOR BRAKE SYSTEM APPLICATION. Masters thesis, King Fahd University of Petroleum and Minerals.

(2009) Analysis and Modeling of Hot Extrusion Die for its Service Life Enhancement. PhD thesis, King Fahd University of Petroleum and Minerals.

(2009) EFFECT OF FLUID HYDRODYNAMICS ON CALCIUM SULFATE "CASO4" DEPOSITION ON ALUMINUM METAL SURFACE. Masters thesis, King Fahd University of Petroleum and Minerals.

Petroleum Engineering

(2009) ANALYSIS OF ARCHIE’S PARAMETERS DETERMINATION TECHNIQUES. Masters thesis, King Fahd University of Petroleum and Minerals.

(2009) LWD POROSITY PREDICTION FOR WELL PLACEMENT USING NEURAL NETWORK. Masters thesis, King Fahd University of Petroleum and Minerals.

(2009) Application of Neural Network for Two Phase Flow Through Chokes. Masters thesis, King Fahd University of Petroleum and Minerals.

(2009) Effects of Geometry and Anisotropy on Permeability Measurements from Drill Cuttings. Masters thesis, King Fahd University of Petroleum and Minerals.

(2009) ANALYSIS OF ARCHIE’S PARAMETERS DETERMINATION TECHNIQUES. Masters thesis, King Fahd University of Petroleum and Minerals.

Physics

(2009) Energy-Efficient Coatings Based On Wo3-Metal Multilayers. Masters thesis, King Fahd University of Petroleum and Minerals.

lndustrial and Systems Engineering

(2009) PREDICTION OF CRUDE OIL PVT PROPERTIES BY SOFT COMPUTING TECHNIQUES. Masters thesis, King Fahd University of Petroleum and Minerals.

(2009) Artificial Intelligence Techniques in Reservoir Characterization. Masters thesis, King Fahd University of Petroleum and Minerals.

(2008) Automated Insulin Delivery to Diabetic Patients. Masters thesis, King Fahd University of Petroleum and Minerals.

(2009) LMI-BASED CONTROL OF NONLINEAR TIME-DELAY MODEL FOR “TYPE 1-DIABETIC PATIENT”. Masters thesis, King Fahd University of Petroleum and Minerals.

(2009) Extensions and Characterization of Optimal Maintenance Policies for Multistate Partially Observed Markovian Systems. PhD thesis, King Fahd University of Petroleum and Minerals.

(2008) Single Machine Scheduling with Uncertain Processing Times. Masters thesis, King Fahd University of Petroleum and Minerals.

(2009) Fault Diagnosis Using a Sequential Integration of Model-Free and Model-Based Approaches. Masters thesis, King Fahd University of Petroleum and Minerals.

(2009) ROBUST STABILITY AND FEEDBACKSTABILIZATION CRITERIA FOR SYSTEMSWITH TIME-VARYING DELAYS. Masters thesis, King Fahd University of Petroleum and Minerals.