Items where Department is "Petroleum Engineering" and Year is 2008

Up a level
Export as [feed] Atom [feed] RSS 1.0 [feed] RSS 2.0
Group by: Item Type | No Grouping
Number of items: 50.

(2005) Development and testing of an artificial neural network model for predicting bottomhole pressure in vertical multiphase flow. Masters thesis, King Fahd University of Petroleum and Minerals.

(1993) Comparative study of computational methods for the solution of the two-dimensional reservoir flow equations. Masters thesis, King Fahd University of Petroleum and Minerals.

(1992) A New correlation for two-phase flow through chokes. Masters thesis, King Fahd University of Petroleum and Minerals.

(1997) Development of multiphase flow metering set-up utilizing coriolis meters. Masters thesis, King Fahd University of Petroleum and Minerals.

(2001) Application of neural network to the determination of well-test interpretation model for horizontal wells. Masters thesis, King Fahd University of Petroleum and Minerals.

(2001) Compositional gradient calculations for a Saudi Arabian gas condensate reservoir. Masters thesis, King Fahd University of Petroleum and Minerals.

(1994) Corrosivity of water-base drilling fluids in deep, hot wells. Masters thesis, King Fahd University of Petroleum and Minerals.

(1992) Surface charge behavior and adsorption of surfactants on carbonate rocks. Masters thesis, King Fahd University of Petroleum and Minerals.

(1992) Factors affecting pseudo relative permeability curves. Masters thesis, King Fahd University of Petroleum and Minerals.

(1995) An experimental study of oil recovery from tarmat reservoirs using hot water and solvent flooding. PhD thesis, King Fahd University of Petroleum and Minerals.

(1997) The Effect of retarder on gelation time and stability of polyacrylamide chromium (III) gel system. Masters thesis, King Fahd University of Petroleum and Minerals.

(1989) Evaluation of vertical multiphase flow correlations for Saudi Arabian field conditions. Masters thesis, King Fahd University of Petroleum and Minerals.

(1994) Analysis of the factors affecting the gelation time for polyacrylamide-redox system. Masters thesis, King Fahd University of Petroleum and Minerals.

(1990) The Effect of injected water salinity on oil recovery. Masters thesis, King Fahd University of Petroleum and Minerals.

(1999) Improving standstone matrix stimulation for oil wells by gas preconditioning. Masters thesis, King Fahd University of Petroleum and Minerals.

(2001) Effect of drilling fluid particle sizes on formation damage: application to horizontal well. Masters thesis, King Fahd University of Petroleum and Minerals.

(1990) The Effect of multiple fractures on the performance of gas wells. Masters thesis, King Fahd University of Petroleum and Minerals.

(1996) Evaluation of empirically derived PVT properties for oil field brines. Masters thesis, King Fahd University of Petroleum and Minerals.

(2000) Incorporating the effects of gas slippage and non-darcy flow in the measurement of permeability using pressure pulse decay technique. Masters thesis, King Fahd University of Petroleum and Minerals.

(1998) Investigation of horizontal well performance using Hele-Shaw model. Masters thesis, King Fahd University of Petroleum and Minerals.

(1995) Evaluation of correlations for natural gas compressibility factors. Masters thesis, King Fahd University of Petroleum and Minerals.

(1993) Investigation of the production performance of horizontal wells in fractured bottom water drive reservoirs. PhD thesis, King Fahd University of Petroleum and Minerals.

(1995) Experimental investigation of various physical factors affecting the stability of water-in-oil emulsions in oil production. Masters thesis, King Fahd University of Petroleum and Minerals.

(1990) Oil compressibility correlations. Masters thesis, King Fahd University of Petroleum and Minerals.

(1999) Spontaneous ignition characteristics of a super-light oil. Masters thesis, King Fahd University of Petroleum and Minerals.

(1995) Recovery performance and relative permeabilities of composite cores. Masters thesis, King Fahd University of Petroleum and Minerals.

(2001) A New dewpoint pressure correlation for gas-condensate systems. Masters thesis, King Fahd University of Petroleum and Minerals.

(1999) Effect of formation damage on horizontal well performance. Masters thesis, King Fahd University of Petroleum and Minerals.

(2000) Effect of a hydraulic fracture on the performance of a layered gas condensate reservoir. Masters thesis, King Fahd University of Petroleum and Minerals.

(2000) Application of pulse-decay technique to characterize whole cores. Masters thesis, King Fahd University of Petroleum and Minerals.

(1996) Pressure transient behavior of a well in anisotropic reservoir intersected by multiple fractures. Masters thesis, King Fahd University of Petroleum and Minerals.

(1994) A Parametric study of water-coning in horizontal wells. Masters thesis, King Fahd University of Petroleum and Minerals.

(1997) Optimization of horizontal well completion : (position, length and perforation scenarios). Masters thesis, King Fahd University of Petroleum and Minerals.

(1987) Phase behavior and microemulsion studies on a Saudi Arabian crude. Masters thesis, King Fahd University of Petroleum and Minerals.

(1994) Development of empirical equations for water-oil relative permeability. Masters thesis, King Fahd University of Petroleum and Minerals.

(1999) Effect of liquid rop-out on the productivity of a rich gas condensate reservoir. Masters thesis, King Fahd University of Petroleum and Minerals.

(1994) Design of an Alkaline/Surfactant/Polymer enhanced oil recovery scheme for a Saudi Arabian limestone reservoir. Masters thesis, King Fahd University of Petroleum and Minerals.

(2003) Monitoring fluid fron movement using permanent resistivity arrays. Masters thesis, King Fahd University of Petroleum and Minerals.

(2005) Development and testing of an artificial neural network model for predicting bottomhole pressure in vertical multiphase flow. Masters thesis, King Fahd University of Petroleum and Minerals.

(2004) Laboratory study on precipitation of calcium sulphate in berea sandstone cores. Masters thesis, King Fahd University of Petroleum and Minerals.

(1987) Adsorption of surfactants on Saudi Arabian limestone. Masters thesis, King Fahd University of Petroleum and Minerals.

(1990) The Effect of high temperature and aging on water-base drilling fluids. Masters thesis, King Fahd University of Petroleum and Minerals.

(1991) Factors affecting mercury capillary pressure measurements. Masters thesis, King Fahd University of Petroleum and Minerals.

(2005) Evaluation of empirically derived PVT properties for Nigerian crude oils. Masters thesis, King Fahd University of Petroleum and Minerals.

(2006) Interference testing using horizontal wells in anisotropic reservoirs. Masters thesis, King Fahd University of Petroleum and Minerals.

(1992) A New Correlation for Two-Phase Flow Through Chokes. Masters thesis, KING FAHD UNIVERSITY OF PETROLEUM & MINERALS.

(1992) Surface Charge Behavior and Adsorption of Surfactants on Carbonate Rocks. Masters thesis, KING FAHD UNIVERSITY OF PETROLEUM & MINERALS.

(1992) Factors Affecting Pseudo Relative Permeability Curves. Masters thesis, KING FAHD UNIVERSITY OF PETROLEUM & MINERALS.

(1991) Factors Affecting Mercury Capillary Pressure Measurements. Masters thesis, KING FAHD UNIVERSITY OF PETROLEUM & MINERALS.

PERMEABILITY ANISOTROPY DISTRIBUTIONS IN AN UPPER JURASSIC CARBONATE RESERVOIR, EASTERN SAUDI ARABIA. JOURNAL OF PETROLEUM GEOLOGY 30 (2) 2007.

This list was generated on Fri Sep 30 12:16:51 2022 +03.