Thesis

ENERGY, EXERGY AND THERMOECONOMIC ANALYSIS OF PARABOLIC TROUGH SOLAR POWER PLANTS. Masters thesis, King Fahd University of Petroleum and Minerals.

Premixed Syngas Combustion: Modeling and Application to a Swirl-Stabilized Combustor. Masters thesis, King Fahd University of Petroleum and Minerals.

DEVELOPMENT AND CHARACTERIZATION OF HYBRID GLASS FIBER AND EPOXY CLAY NANOCOMPOSITES. Masters thesis, King Fahd University of Petroleum and Minerals.

Experimental & Numerical Investigations of Oxy-fuel Combustion Using Porous Plate Reactor. Masters thesis, King Fahd University of Petroleum and Minerals.

THE IMPACT OF COST AND FOULING ON HEAT EXCHANGER INVENTORY IN POWER AND REFRIGERATION SYSTEMS. PhD thesis, King Fahd University of Petroleum and Minerals.

ENHANCEMENT OF MECHANICAL AND PHYSICAL PROPERTIES OF SILICATE BASED EPOXY NANOCOMPOSITES. Masters thesis, King Fahd University of Petroleum and Minerals.

DEVELOPMENT OF ENERGY EFFICIENT SOLAR POWERED AQUA-AMMONIA ABSORPTION REFRIGERATION AND AIR-CONDITIONING SYSTEM. PhD thesis, King Fahd University of Petroleum and Minerals.

A Numerical Modeling Approach for Transformation-Induced Failures. Masters thesis, King Fahd University of Petroleum and Minerals.

STRUCTURAL STABILITY OF MEMS ARCHES ACTUATED BY ELECTROSTATIC FRINGING FIELDS. Masters thesis, King Fahd University of Petroleum and Minerals.

OPTIMIZATION AND FAILURE ANALYSIS OF A CABLE BASED PARALLEL MANIPULATOR FOR SUBSEA APPLICATIONS. Masters thesis, King Fahd University of Petroleum and Minerals.

H2S AND CO2 CORROSION OF SA-543 AND X65 STEELS IN OIL/WATER EMULSION. Masters thesis, King Fahd University of Petroleum and Minerals.

Multi-stage Bubble Column Humidifier for Thermal Driven Mechanical Compression Humidification Dehumidification Desalination System. Masters thesis, King Fahd University of Petroleum and Minerals.

STUDY ON THE SOLID PARTICLE EROSION AND EROSION-CORROSION BEHAVIOR OF ALUMINUM AND STEELS. Masters thesis, King Fahd University of Petroleum and Minerals.

MULTIPHYSICS MODELING OF THE SPARK PLASMA SINTERING PROCESS. Masters thesis, King Fahd University of Petroleum and Minerals.

INVESTIGATING DISLOCATION STRUCTURE EVOLUTION DURING NANOINDENTATION. Masters thesis, King Fahd University of Petroleum and Minerals.

DEVELOPMENT OF A NOVEL HYBRID STORAGE SYSTEM FOR AQUA-AMMONIA SOLAR ABSORPTION REFRIGERATION CYCLE. Masters thesis, King Fahd University of Petroleum and Minerals.

NUMERICAL AND EXPERIMENTAL ANALYSIS ON THERMAL STRESS MEASUREMENT OF SPIRAL WELDED PIPES. Masters thesis, King Fahd University of Petroleum and Minerals.

COMPUTATIONAL FLUID DYNAMICS (CFD) MODELING OF SOLAR STEAM METHANE REFORMER AND DESIGN OF AN INTEGRATED NOVEL SOLAR COLLECTOR. Masters thesis, King Fahd University of Petroleum and Minerals.

Thixoforging of Aluminum Nano-composites Synthesized by Ultrasonic Stir Casting. Masters thesis, King Fahd University of Petroleum and Minerals.

Fundamental Studies of Dust Fouling and Mitigation Approaches for PV Modules. Masters thesis, King Fahd University of Petroleum and Minerals.

EXPERIMENTAL INVESTIGATION OF TUBE RUPTURE UNDER BOILER DYNAMIC OPERATING CONDITIONS. Masters thesis, King Fahd University of Petroleum and Minerals.

Evaluation of the Effectiveness of Alkaline-earth metal oxides in Inhibiting Vanadium-induced Hot Corrosion of Yttria-stabilized Zirconia Thermal Barrier Coatings (TBCs). Masters thesis, King Fahd University of Petroleum and Minerals.

Performance Improvement of a Vapor Compression Air Conditioning System by Condensate and Fresh Water Source. Masters thesis, King Fahd University of Petroleum and Minerals.

Experimental Studies on Solar Photo-voltaic Refrigeration System. Masters thesis, King Fahd University of Petroleum and Minerals.

Study of the long-term degradation of boiler superheater tubes and its effects on remaining life predictions. Masters thesis, King Fahd University of Petroleum and Minerals.