Thesis

NUMERICAL AND EXPERIMENTAL ANALYSIS OF PHOTOVOLTAIC PANEL COOLING. Masters thesis, King Fahd University of Petroleum and Minerals.

Load and Energy Analysis of a Commercial Building. Masters thesis, King Fahd University of Petroleum and Minerals.

MODELING OF A COMBINED ITM-POROUS OXYGEN TRANSPORT REACTOR: TOWARDS A SPATIALLY UNIFORM TEMPERATURE ITM. Masters thesis, King Fahd University of Petroleum and Minerals.

DEVELOPMENT AND CHARACTERIZATION OF EPOXY-CLAY ANOCOMPOSITES. PhD thesis, King Fahd University of Petroleum and Minerals.

Synthesis and Characterization of Thin MFI-type Zeolite Layer on Porous Alumina Substrates. Masters thesis, King Fahd University of Petroleum and Minerals.

INFLUENCE OF GAS RADIATION MODELS ON OXY-COMBUSTION CHARACTERISTICS PREDICTIONS. Masters thesis, King Fahd University of Petroleum and Minerals.

Look-Up Table for Two-Phase pressure Drop Multiplier. Masters thesis, King Fahd University of Petroleum and Minerals.

THERMAL ANALYSIS OF THERMOELECTRIC POWER GENERATOR; INCLUDING THERMAL STRESSES. Masters thesis, King Fahd University of Petroleum and Minerals.

Noise Reduction in Centrifugal Compressors using Helmholtz Resonators. Masters thesis, King Fahd University of Petroleum and Minerals.

NUMERICAL AND EXPERIMENTAL INVESTIGATIONS OF FRICTION STIR WELDING OF TUBE-TUBESHEET JOINTS. PhD thesis, King Fahd University of Petroleum and Minerals.

INFLUENCE OF CARBON NANOTUBES (CNT) ON THE MECHANICAL PROPERTIES OF THE POLYETHYLENE THERAPHTHALATE (PET)/CNT NANOCOMPOSITE FIBERS. Masters thesis, King Fahd University of Petroleum and Minerals.

ENHANCING THE BIOFOULING RESISTANCE OF REVERSE OSMOSIS MEMBRANES BY A NOVEL SURFACE MODIFICATION TECHNIQUE. PhD thesis, King Fahd University of Petroleum and Minerals.

Development and Characterization of Carbon Nanotubes (CNTs) And Silicon Carbide (SiC) Reinforced Al-based Nanocomposites. Masters thesis, King Fahd University of Petroleum and Minerals.

SYNTHESIS AND WEAR BEHAVIOR OF ALUMINUM 6061 ALLOY REINFORCED WITH CARBON NANOTUBES. Masters thesis, King Fahd University of Petroleum and Minerals.

IMPROVING QUALITY AND PRODUCTIVITY OF CASTING PROCESS BY USING ADVANCED SIMULATION AND RAPID PROTOTYPING TECHNOLOGY. Masters thesis, King Fahd University of Petroleum and Minerals.

Performance Analysis of Oxygen Transport Reactors Utilizing Ion Transport Membranes. Masters thesis, King Fahd University of Petroleum and Minerals.

Acoustic Noise Control Using Multiple Expansion Chambers. Masters thesis, King Fahd University of Petroleum and Minerals.

Modeling AND Optimization OF A Hybrid Solar Combined Cycle (HYCS). Masters thesis, King Fahd University of Petroleum and Minerals.

MULTI-PHYSICS MODELING OF PHOTOVOLTAIC MODULES AND ARRAYS WITH AUXILIARY THERMAL COLLECTORS. Masters thesis, King Fahd University of Petroleum and Minerals.

Balancing of Flexible Rotors at Low Speed. Masters thesis, King Fahd University of Petroleum and Minerals.