Abdul, Subhan (2012) Numerical & Experimental Analysis of Photovoltaic (pv) Panel Cooling. Masters thesis, King Fahd University of Petroleum and Minerals.

Hajibrahim, Jaffar Awn (2012) Load and Energy Analysis of a Commercial Building. Masters thesis, King Fahd University of Petroleum and Minerals.

Shaik, Pervez (2012) Modeling of a combined ITM-Porous Oxygen Transport Reactor : Towards a spatially uniform Temperature ITM. Masters thesis, King Fahd University of Petroleum and Minerals.

Al-Qadhi, Muneer Abd (2012) Development and Characterization of Epoxy-Clay Nanocomposites. PhD thesis, King Fahd University of Petroleum and Minerals.

Barood, Turki Nabi (2012) Fabrication of Mfi Zeolite Membrane for Ro (reverse Osmosis) Water Desalination Process. Masters thesis, King Fahd University of Petroleum and Minerals.

Ahmad, Rajhi Moha (2012) Influence of Gas Radiation Models on Oxy-Combusion Characteristics. Masters thesis, King Fahd University of Petroleum and Minerals.

Alsurakji, Ihab Hisha (2012) A Look-up Table for Two-Phase Pressure Drop Multiplier. Masters thesis, King Fahd University of Petroleum and Minerals.

Al Merbati, Abdulrahma (2012) Thermal Analysis of Thermoelectric Power Generator Including Thermal Stresses. Masters thesis, King Fahd University of Petroleum and Minerals.

Farooqui, Maaz (2012) Noise Reduction in Centrifugal Compressors using Helmholtz Resonator. Masters thesis, King Fahd University of Petroleum and Minerals.

A. Al-Badour, Fadi (2012) Numerical And Experimental Investigations Of Friction Stir Welding Of Tube-Tubesheet Joints. PhD thesis, King Fahd University of Petroleum and Minerals.

Riyazuddin Farooqui, Mohammed (2012) Influence of Carbon Nanotubes (cnt) on the Mechanical Properties and Processibilityoif Polyethylene Teraphthalate (pet)/cnt Nanocomposites Fibers. Masters thesis, King Fahd University of Petroleum and Minerals.

Gujba, Abdullah (2012) Development and Characterization of CNTs and SiC Reinforced Al-based Nanocomposites. Masters thesis, King Fahd University of Petroleum and Minerals.

Khalil, Abdullah (2012) Synthesis and Wear Behavior of Aluminum 6061 Alloy Reinforced with Carbon Nanotubes. Masters thesis, King Fahd University of Petroleum and Minerals.

Al-Yousef, Abdullah (2012) Improving Quality and Productivity of Casing Process by Using Advanced Simulation and Rapid Prototyping Tech. Masters thesis, King Fahd University of Petroleum and Minerals.

Najeeb, Azharuddin (2012) Performance Analusis of Oxygen Transport Reactors utilizing lon Transport Membranes. Masters thesis, King Fahd University of Petroleum and Minerals.

Horoub, Mamon (2012) Acoustic Noise Control Using Multiple Expansion Chambers. Masters thesis, King Fahd University of Petroleum and Minerals.

Eter, Ahmad (2012) Modelling and Optimization of a Hybrid Solar Combined Cycle (HYCS). Masters thesis, King Fahd University of Petroleum and Minerals.

Siddiqui, M Usama (2012) Multi-Physics Modelling of Photovoltaic Modules and Arrays with Auxiliary Thermal Collectors. Masters thesis, King Fahd University of Petroleum and Minerals.

Adeyemi Oke, Wasiu (2012) Balancing Of Flexible Rotors at Low Speed. Masters thesis, King Fahd University of Petroleum and Minerals.