Items where Department is "Chemical Engineering" and Year is 2014
![]() | Up a level |
Thesis
Design and Synthesis of Flexible Heat Exchanger Networks with Variable Stream Properties. Masters thesis, King Fahd University of Petroleum and Minerals.
Carbon-di-oxide Capture and Growth Kinetics Study of Two Chlorella Vulgaris and Nannochloropsis Oculata in Batch and Series Photobioreactors. Masters thesis, King Fahd University of Petroleum and Minerals.
Ce Modified Ni and Fe Based Oxygen Carriers for Chemical Looping Combustion. Masters thesis, King Fahd University of Petroleum and Minerals.
Heat Transfer Enhancement of Nanofluids using Raw, Chemically Modified and Impregnated Carbon Nanotubes. Masters thesis, King Fahd University of Petroleum and Minerals.
Silicoaluminophosphate (SAPO-34) Grown on SiC Foams as Structured Catalysts for Methanol to Olefin Reaction. Masters thesis, King Fahd University of Petroleum and Minerals.
Preparation and Characterization of HDPE/Graphene Nano-Composites by In-situ Polymerization. Masters thesis, King Fahd University of Petroleum and Minerals.
In Situ Copolymerization of Ethylene and Propylene in The Presence of Titania Nanofillers. PhD thesis, King Fahd University of Petroleum and Minerals.
Surfactant-Polymer (SP) Flooding for EOR in Carbonate Resorviors. Masters thesis, King Fahd University of Petroleum and Minerals.
Study of Polymer-Surfactant Interactions for Chemical Enhanced Oil Recovery in Carbonate Reservoirs. Masters thesis, King Fahd University of Petroleum and Minerals.
Development of Nano-sized Zeolites for Converting Methanol to Olefins. Masters thesis, King Fahd University of Petroleum and Minerals.
Design and Optimization of Carbon nano-tubes Production and Chemical Vapor Disposition Reactor. Masters thesis, King Fahd University of Petroleum and Minerals.
Solid Acid Catalyst for Selective Synthesis of 2-Phenyldodecane. Masters thesis, King Fahd University of Petroleum and Minerals.
Ce/W Oxides modified Mesoporous Carbon supported Pt-Pd catalysts for ormic Acid Fuel Cell: Synthesis, Characterization and Evaluation. Masters thesis, King Fahd University of Petroleum and Minerals.
Development of a New Cost-Effective Polymer Gel for Water Control in Oil and Gas Wells. PhD thesis, King Fahd University of Petroleum and Minerals.
Diethylbenzene Production via Ethylbenzene Disproportionation and Ethylation Reactions over HZSM-5 Catalysts: Effect of Si/Al Ratio. Masters thesis, King Fahd University of Petroleum and Minerals.
Modification of Styrene-Methyl Methacrylate Co-Polymer Using Microwave Radiation in The Presence of Graphene. Masters thesis, King Fahd University of Petroleum and Minerals.
A General Stochastic Model for Refinery Planning Under Uncertainty. Masters thesis, King Fahd University of Petroleum and Minerals.
