Effect of Reaction Pressure and Carrier Gas on Toluene Disproportionation over Molybdenum-ZSM-5 Catalyst. Energy & Fuels (2008),, 22(1),.

Characterization of tungstophosphoric acid supported on MCM-41 mesoporous silica by using n-hexane cracking, benzene adsorption, and xray diffraction. Applied Catalysis, A: General (2001),, 207(1,.

Catalytic cracking of polyethylene over all-silica MCM-41 molecular sieve. Applied Catalysis, A: General (2002) (225(1-).

Barium modification of a high-silica zeolite for methanol conversion to light alkenes. Applied Catalysis, A: General (1992), (91(1),).

Effects of metal impregnation on the activity, selectivity and deactivation of a high silica MFI zeolite when converting methanol to light alkenes. Applied Catalysis, A: General (1997),, 154(1-.

(1997) New fault models and efficient BIST algorithms for dual-portmemories. Computer-Aided Design of Integrated Circuits and Systems, IEEE Transactions on, 16.

(1998) Robust control of sampled data systems. Control Theory and Applications, IEE Proceedings -, 145.

(1991) An intelligent EPROM silicon compiler. Communications, Computers and Signal Processing, 1991., IEEE Pacific Rim conference, 1.

(2001) New efficient frequency domain algorithm for H∞approximation with applications to controller reduction. Control Theory and Applications, IEE Proceedings -, 148.

(1996) Generic DFT approach for pattern sensitive faults in word-orientedmemories. Computers and Digital Techniques, IEE Proceedings -, 143.

(1992) Design, selection and implementation of flash erase EEPROM memorycells. Circuits, Devices and Systems, IEE Proceedings G, 139.

(0000) High-speed self-timed carry-skip adder. Circuits, Devices and Systems, IEE Proceedings -, 153.

(2001) Error bounds in approximating time-delay systems. Decision and Control, 2001. Proceedings of the 40th IEEE conference, 2.

(1999) Parametric uncertainty bounds for guaranteedH∞-norm specifications. American Control Conference, 1999. Proceedings of the 1999, 4.

(2004) On the use of L/sub 2/ gap metric for identifying Hammersteim models. Control Conference, 2004. 5th Asian, 1.

(2000) Approximation of time-delay systems. American Control Conference, 2000. Proceedings of the 2000, 4.

(1993) Design and analysis of a high-speed sense amplifier forsingle-transistor nonvolatile memory cells. Circuits, Devices and Systems, IEE Proceedings G, 140.

(1993) Speed optimised array architecture for flash EEPROMs. Circuits, Devices and Systems, IEE Proceedings G, 140.

Efficient O(n) BIST algorithms for DDNPS faults in dual portmemories. Test Conference, 1994. Proceedings., International, 1.

(1994) Parallelism analysis and extraction of digital signal processingalgorithms. Signals, Systems and Computers, 1994. 1994 Conference Record of the Twenty-Eighth Asilomar conference, 2.

(2003) Double-rail encoded self-timed adder with matched delays. Electronics, Circuits and Systems, 2003. ICECS 2003. Proceedings of the 2003 10th IEEE International conference, 3.

(1991) A novel flash erase EEPROM memory cell with reversed poly roles. Electrotechnical Conference, 1991. Proceedings., 6th Mediterranean, 1.

(2004) Numerical investigations of flow in a partially packed vessel. Masters thesis, King Fahd University of Petroleum and Minerals.

(2006) Methanol permeation through proton exchange membranes of direct methanol fuel cells. Masters thesis, King Fahd University of Petroleum and Minerals.

(2005) Studies on high performance NI-based composite catalysts for preferential methanation of CO in a SYNGAS. Masters thesis, King Fahd University of Petroleum and Minerals.

(2004) Diffusion and adsorption of aromatics in zeolites by zero length column technique. Masters thesis, King Fahd University of Petroleum and Minerals.

(2004) Kinetics and equilibrium adsorption of phosphates removal on activated alumina. Masters thesis, King Fahd University of Petroleum and Minerals.

(2006) Studies on catalysts for preferential oxidation of CO in H2-Rich gas mixture. Masters thesis, King Fahd University of Petroleum and Minerals.

(2004) Influence of polymer type and structure on polymer modification of Saudi asphalt. Masters thesis, King Fahd University of Petroleum and Minerals.

(2005) Structure-property relationships of metallocene linear low density polyethylene (LLDPE). Masters thesis, King Fahd University of Petroleum and Minerals.

(2005) Development and application of linear state estimators in control of reactive distillation. Masters thesis, King Fahd University of Petroleum and Minerals.

(2004) Investigations of the flow and pinning phenomena in radial flow reactors. Masters thesis, King Fahd University of Petroleum and Minerals.

(2004) Rheology of gelling polymers used in reservoir water shutoff treatments. Masters thesis, King Fahd University of Petroleum and Minerals.

(2005) Electrochemical removal of carbon monoxide from hydrogen using nickel catalyst. Masters thesis, King Fahd University of Petroleum and Minerals.

(2005) Numerical investigations of melting of ice in a box. Masters thesis, King Fahd University of Petroleum and Minerals.

(2006) Strength and durability characteristics of aluminum joints bonded by rubber-modified and aluminum filled epoxy adhesive. Masters thesis, King Fahd University of Petroleum and Minerals.

(2004) Numerical and experimental studies of non reactive and reactive mixing. Masters thesis, King Fahd University of Petroleum and Minerals.

(2005) Extraction of aromatics using green solvents based on ionic liquids. Masters thesis, King Fahd University of Petroleum and Minerals.

(1971) Air separation on carbon molecular sieves, 4A and 5A zeolites by pressure swing adsorption. Masters thesis, King Fahd University of Petroleum and Minerals.

(2000) Development and analysis of transient models for the biofiltration of single and mixed volatile organic compounds. Masters thesis, King Fahd University of Petroleum and Minerals.

(1992) Activity of Ni/A1 O catalyst for a methanation reaction. Masters thesis, King Fahd University of Petroleum and Minerals.

(2002) Protein partitioning in pH-responsive polymeric amino acid and assocating polymers. Masters thesis, King Fahd University of Petroleum and Minerals.

(1992) Density-temperature behavior of pure and defined binary and ternary hydrocarbon mixtures. Masters thesis, King Fahd University of Petroleum and Minerals.

(2001) Theoretical potential scans and vibrational spectra of two rotors halomethyl isocyanates. Masters thesis, King Fahd University of Petroleum and Minerals.

(2004) Modeling and simulation of a combined isomerization reactor/pressures swing adsorption/membrane unit. Masters thesis, King Fahd University of Petroleum and Minerals.

(2001) Numerical simulation of one- and two-phase flows in unpacked and partially packed vessels. Masters thesis, King Fahd University of Petroleum and Minerals.

(2000) Bulk separation of binary gas mixtures by pressure swing adsorption. Masters thesis, King Fahd University of Petroleum and Minerals.

(1995) Development of Raney-Ni gas diffusion electrodes for fuel-cells. PhD thesis, King Fahd University of Petroleum and Minerals.

(1997) Solution behavior of hydrophobic non-ionic and ionic polymers. Masters thesis, King Fahd University of Petroleum and Minerals.

(2002) Copper recovery from wastewater using an electrochemical rotating barrel reactor. Masters thesis, King Fahd University of Petroleum and Minerals.

(1992) Numerical simulation of continuous countercurrent adsorption systems. Masters thesis, King Fahd University of Petroleum and Minerals.

(2000) Ethylene oligomerization to olefins on supported nickel catalyst. Masters thesis, King Fahd University of Petroleum and Minerals.

(2004) Numerical analysis of entropy generation in laminar viscous fluid flow between parallel plates. Masters thesis, King Fahd University of Petroleum and Minerals.

(2000) Computational study of conformational behavior and analyses of vibrational spectra of some ketenes. Masters thesis, King Fahd University of Petroleum and Minerals.

(1998) Investigation of transient heat transfer in a rectangular packed duct with asymmetric heating. Masters thesis, King Fahd University of Petroleum and Minerals.

(2000) Modeling of adsorption-reaction phenomena on activated carbon. Masters thesis, King Fahd University of Petroleum and Minerals.

(1994) Solution properties of sidechain polymers for enhanced oil recovery. Masters thesis, King Fahd University of Petroleum and Minerals.

(2000) Modeling of hydrodynamics and mass transfer in cocurrent packed columns. Masters thesis, King Fahd University of Petroleum and Minerals.

(2000) Hydrogen bonding in polymer blends: effect on glass transition temperature. Masters thesis, King Fahd University of Petroleum and Minerals.

(2004) Hydrocracking catalysts for vacuum gas oil and de-metallized oil blend. Masters thesis, King Fahd University of Petroleum and Minerals.

(1990) Methanol conversion to light olefins over commercial zeolites. Masters thesis, King Fahd University of Petroleum and Minerals.

(1999) Modeling and simulation of a downer-type fluid catalytic cracking unit. Masters thesis, King Fahd University of Petroleum and Minerals.

(2003) Theoretical analysis and simulation of immobilized enzyme reactors. Masters thesis, King Fahd University of Petroleum and Minerals.

(1996) Bifurcation phenomena in non-isothermal reactive gas absorption. Masters thesis, King Fahd University of Petroleum and Minerals.

(2001) A Study of corrosion control of mild steel using inhibitors under atmospheric conditions. Masters thesis, King Fahd University of Petroleum and Minerals.

(2004) Corrosion behavior of mild steel under atmospheric and accelerated conditions after treatment by several inhibitor solutions. Masters thesis, King Fahd University of Petroleum and Minerals.

(1995) Investigation of heat transfer in a rectangular packed duct with constant heat flux and asymmetrical wall temperatures. Masters thesis, King Fahd University of Petroleum and Minerals.

(1996) Studies of the terephthalic acid and dihydroxy diphenyl sulfone liquid crystalline copolymer and its composites. Masters thesis, King Fahd University of Petroleum and Minerals.

(2000) The effect of unit cell size on the activity and selectivity of FCC catalysts. Masters thesis, King Fahd University of Petroleum and Minerals.

(2002) Investigations of mixing in pipelines with side-, opposed-, and multiple-tees. Masters thesis, King Fahd University of Petroleum and Minerals.

(2004) Study of natural convection from cylindrical surfaces embedded in porous media by LDCT. Masters thesis, King Fahd University of Petroleum and Minerals.

(2003) Metal incorporation in MCM-41 for hydrodesulfurization. Masters thesis, King Fahd University of Petroleum and Minerals.

(2002) Deactivation of dehydration adsorbents. PhD thesis, King Fahd University of Petroleum and Minerals.

(1993) Steady state experimental evaluation of a Novel raney-Ni/PTFE gas diffusion electrode in an alkaline fuel cell. Masters thesis, King Fahd University of Petroleum and Minerals.

(1996) Stabilization of Raney Nickel catalyst for fuel cell electrodes. Masters thesis, King Fahd University of Petroleum and Minerals.

(2000) Modeling and simulation of a combined isomerizaion reactor/pressures swing adsorption unit. Masters thesis, King Fahd University of Petroleum and Minerals.

(1996) Modeling of transient gas-solid reactions in a fixed-based reactor. Masters thesis, King Fahd University of Petroleum and Minerals.

(1992) Steady state multiplicity in gas-liquid CSTRs. Masters thesis, King Fahd University of Petroleum and Minerals.

(2004) Xylene stransformation over Y zeolite in a fluidized-bed reactor. Masters thesis, King Fahd University of Petroleum and Minerals.

(1990) Unsteady state performance of porous gas-diffusion electrodes in alkaline fuel cell. Masters thesis, King Fahd University of Petroleum and Minerals.

(2000) A study of protein partinioning in two phase aqueous solutions of random and multi-block capolymers. Masters thesis, King Fahd University of Petroleum and Minerals.

(1993) Separation process for the recovery of desalted water and chemical products from indigenous saline water resources. PhD thesis, King Fahd University of Petroleum and Minerals.

(1992) Hydrogen production by the electrolysis of saline water. Masters thesis, King Fahd University of Petroleum and Minerals.

(2000) Experimental investigation of hydrogen spillover on Co-Clay hydrotreating catalysts by noble metals. Masters thesis, King Fahd University of Petroleum and Minerals.

(2000) Mixture models for dense fluids and polymers. Masters thesis, King Fahd University of Petroleum and Minerals.

(1980) Dearomatization of naphtha cuts from Saudi Arabian crudes using different selective solvents. Masters thesis, King Fahd University of Petroleum and Minerals.

(1996) A Study of rheology and interfacial activity of amphiphilic block copolymers for enhanced oil recovery. Masters thesis, King Fahd University of Petroleum and Minerals.

(1984) Comparison of binary sorption of propane and N-butane on 5A and 13X Zeolites. Masters thesis, King Fahd University of Petroleum and Minerals.

(1997) Non-catalytic partial oxidation of sour natural gas. Masters thesis, King Fahd University of Petroleum and Minerals.

(1992) Binary separations by pressure swing adsorption processes. PhD thesis, King Fahd University of Petroleum and Minerals.

(1981) Two dimensional mathematical model of evacuated tubular solar collector. Masters thesis, King Fahd University of Petroleum and Minerals.

(1984) Packed-bed adsorption of phenol and 2, 4 dichlorophenoxy acetic acid on the macroreticular resin XAD-7. Masters thesis, King Fahd University of Petroleum and Minerals.

(1985) A Study of copper recovery by liquid membrane containing a chelating agent. Masters thesis, King Fahd University of Petroleum and Minerals.

(1975) Corrosion of steel in the Arabian environment. Masters thesis, King Fahd University of Petroleum and Minerals.

(2000) Modeling of a nonisothermal tubular reactor packed with immobilized enzyme systems. Masters thesis, King Fahd University of Petroleum and Minerals.

(1995) Analysis of packed bed biofilm reactor under single and multiple substrate utilization. Masters thesis, King Fahd University of Petroleum and Minerals.

(2003) Investigation of degradation of NBR and HNBR elastomers by light scattering rheology and molecular dynamics techniques. Masters thesis, King Fahd University of Petroleum and Minerals.

(1995) Optimization of continuous counter current adsorption systems. Masters thesis, King Fahd University of Petroleum and Minerals.

(2004) Photophysical behavior of 1,8-diaminonaphthalene in acidic aqueous solutions and in zeolite sieves. Masters thesis, King Fahd University of Petroleum and Minerals.

(1992) Modeling of fluidised-bed reactors; generalisation of the Werther model. Masters thesis, King Fahd University of Petroleum and Minerals.

(2002) Electropolymerization of pyrrole on mild steel for corrosion protection. Masters thesis, King Fahd University of Petroleum and Minerals.

(1994) Adsorption of light gases and their mixtures on SR-115 and ETS-10 Zeolites. Masters thesis, King Fahd University of Petroleum and Minerals.

(1997) Model-based controller design for a continuous pulping reactor. Masters thesis, King Fahd University of Petroleum and Minerals.

(1996) Experimental investigation of biofilter parameters. Masters thesis, King Fahd University of Petroleum and Minerals.

(2003) Influence of molecular parameters on the miscibility of metallocene LLDPE and HDPE blends: rheological and molecular dynamics simulation investigation. Masters thesis, King Fahd University of Petroleum and Minerals.

(1984) Effects of hydrogen sulfide, ammonia and water on catalytic hydrogenation of propylbenzene. Masters thesis, King Fahd University of Petroleum and Minerals.

(2004) Numerical investigations of flow in a partially packed vessel. Masters thesis, King Fahd University of Petroleum and Minerals.

(2003) Simulation of a simulated moving bed reactor for hydrocarbon isomerization. Masters thesis, King Fahd University of Petroleum and Minerals.

(2005) Synthesis and characterization of composite polymeric membranes for proton exchange membrane (PEM) fuel cell applications. Masters thesis, King Fahd University of Petroleum and Minerals.

(1997) Performance of biofilters under non-isothermal conditions. Masters thesis, King Fahd University of Petroleum and Minerals.

(1995) Modeling of Multicomponent gas-solid reactions. Masters thesis, King Fahd University of Petroleum and Minerals.

(1985) Kinetic study of ethylene oxidation using silver catalyst in a Berty reactor. Masters thesis, King Fahd University of Petroleum and Minerals.

(2003) Preparation and characterization of polypropylene/palm fiber composites. Masters thesis, King Fahd University of Petroleum and Minerals.

(1988) Equilibrium adsorption of light alkanes and their mixtures at high pressure on 5A, 13X and S-115 adsorbents. Masters thesis, King Fahd University of Petroleum and Minerals.

(1981) Measurements on wall turbulence. Masters thesis, King Fahd University of Petroleum and Minerals.

(1997) Convective heat transfer characteristics in the rectangular packed beds with asymmetric heating. Masters thesis, King Fahd University of Petroleum and Minerals.

(1988) Hydrogen transfer cracking of Arabian vacuum residuum in tetralin. Masters thesis, King Fahd University of Petroleum and Minerals.

(2003) Removal of heavy metal ions using a novel integrated electrolytic-electrodialytic process. Masters thesis, King Fahd University of Petroleum and Minerals.

Moisture diffusion into palm/polypropylene composites in sodium chloride solutions. Journal of Applied Polymer Science.

(2002) Catalytic Conversion of Waste Plastics/Petroleum Resid Mixtures into Transportation Fuels. In: National Meeting of American Chemical Society, Boston.

(2007) Useful Liquid Products from the Pyrolysis of Mixed Plastics. In: 234th ACS National Meeting & Exposition.

(2004) Study on the Conversion of Waste Plastics/Petroleum Resid Mixtures to Transportation Fuels. Journal of Material Cycles and Waste Management, 6. pp. 27-34.

(2006) Catalytic Processing of Waste Plastics With/Without Petroleum Resid – An Economic Evaluation. Energy Sources A, 28 (15). pp. 1353-1363.

(1995) Techno-economics Evaluation of Waste Lube Oil Rerefining. Inter. J. Production Economics, 42. pp. 263-273.

(1993) Steady state experimental evaluation of a novel Raney-Ni/PTFE gas diffusion electrode in an alkaline fuel cell. Masters thesis, King Fahd University of Petroleum and Minerals.

(1992) Steady State Multiplicity In Gas-Liquid CSTRs. Masters thesis, KING FAHD UNIVERSITY OF PETROLEUM & MINERALS.

(1992) Numerical Simulation of Continuous Countercurrent Adsorption Systems. Masters thesis, KING FAHD UNIVERSITY OF PETROLEUM & MINERALS.

(1992) Density-Temperature Behavior of Pure And Defined Binary and Ternary Hydrocarbon Mixtures. Masters thesis, KING FAHD UNIVERSITY OF PETROLEUM & MINERALS.

(1992) Hydrogen Production by The Electrolysis of Saline Water. Masters thesis, KING FAHD UNIVERSITY OF PETROLEUM & MINERALS.

(1993) Steady State Experimental Evaluation of a Novel Raney-Ni/PTFE Gas Diffusion Electrode in an Alkaline Fuel Cell. Masters thesis, KING FAHD UNIVERSITY OF PETROLEUM & MINERALS.

MIXING IN PIPELINES WITH SIDE-TEES. The 6th Saudi Engineering Conference, KFUPM, Dhahran, December 2002.

TECHNOLOGY OF DIRECT METHANOL FUEL CELL PROGRESS AND FUTURE PROSPECTS. The 6th Saudi Engineering Conference, KFUPM, Dhahran, December 2002.

INTEGRATING REFINING AND PETROCHEMICALS FEEDSTOCKS THROUGH A NOVEL FCC PROCESS. The 6th Saudi Engineering Conference, KFUPM, Dhahran, December 2002.

INFLUENCE OF BRANCH CONTENT OF ETHYLENE/1- HEXENE METALLOCENE –BASED LLDPE ON ITS MISCIBILITY WITH LDPE: A MOLECULAR DYNAMICS STUDY. The 6th Saudi Engineering Conference, KFUPM, Dhahran, December 2002.

MOLECULAR DYNAMICS SIMULATION OF THE INFLUENCE OF BRANCH CONTENT ON THE MISCIBILITY OF HDPE IN METALLOCENE OCTENE-LLDPES. The 6th Saudi Engineering Conference, KFUPM, Dhahran, December 2002.

USED OIL RECYCLING AND TREATMENT IN THE UNITED ARAB EMIRATES ECONOMICAL AND ENVIRONMENTAL ASSESSMENTS. The 6th Saudi Engineering Conference, KFUPM, Dhahran, December 2002.

STUDY OF EQUILIBRIUM ADSORPTION OF ORTHOPHOSPHATE ON ALUMINA ADSORBENTS. The 6th Saudi Engineering Conference, KFUPM, Dhahran, December 2002.

Deep desulphurization of gasoline and diesel fuels using non-hydrogen consuming techniques. Fuel 85 (2006) 1354–1363.