Investigation of Fiber Optic Embedding Processes within Different Types of Material. Masters thesis, King Fahd University of Petroleum and Minerals.

Nanofiltration as a Pretreatment Step in Thermal Seawater Desalination Systems. Masters thesis, King Fahd University of Petroleum and Minerals.

The Effect of Composition and Heat Treatment on the Passivation of Steel Rebar in Concrete Simulating Environment. Masters thesis, King Fahd University of Petroleum and Minerals.

Performance Analysis of a New Augmented Solar Chimney Power Plant Design. Masters thesis, King Fahd University of Petroleum and Minerals.

Effect of Temperature and Drag Reducing Polymer on the Stability and Pressure Drop of Water/Oil Emulsion Turbulent Flow in a Conduit. Masters thesis, King Fahd University of Petroleum and Minerals.

Development of ZIF-8 Based Mixed Matrix Membranes for Oxygen Enriched Air Applications. Masters thesis, King Fahd University of Petroleum and Minerals.

DEVELOPMENT AND CHARACTERIZATION OF HYBRID GLASS FIBER REINFORCED UNSATURATED POLYESTER/CLAY NANOCOMPOSITE. Masters thesis, King Fahd University of Petroleum and Minerals.

Theoretical and Experimental Studies of Modified Humidification Dehumidification Cycles. Masters thesis, King Fahd University of Petroleum and Minerals.

Damage Characterization and Rehabilitation of Fiber-Reinforced-Polymer (FRP) Composite Pipes under Low Velocity Impact. PhD thesis, King Fahd University of Petroleum and Minerals.

Design and economic analysis of nanofluid based photovoltaic thermal (PVT) system with thermal storage. Masters thesis, King Fahd University of Petroleum and Minerals.

Physical Adsorption of Carbon Dioxide Capture by Novel Materials. PhD thesis, King Fahd University of Petroleum and Minerals.

Numerical modeling of the geomechanical behavior of a carbonate petroleum reservoir undergoing CO2 injection. PhD thesis, King Fahd University of Petroleum and Minerals.

Solar Powered Multistage Direct Contact Membrane Distillation System for Water Desalination. Masters thesis, King Fahd University of Petroleum and Minerals.

Developing Friction Stir Diffusion Cladding (FSDC) Process. Masters thesis, King Fahd University of Petroleum and Minerals.

Oxy-Combustion of Fossil Fuel in a Swirl Stabilized Non-Premixed Combustor. Masters thesis, King Fahd University of Petroleum and Minerals.

Thermodynamic analysis for a combined solar LiBr-H2O absorption system with a single effect evaporation cycle. Masters thesis, King Fahd University of Petroleum and Minerals.

Structural Health Monitoring of Composite Materials using Carbon Fiber Sensors. Masters thesis, King Fahd University of Petroleum and Minerals.

Dynamic Analysis of Fiberglass-Reinforced Plastic (FRP) pipes with thickness discontinuity using Wavelet-based Finite Element. PhD thesis, King Fahd University of Petroleum and Minerals.

Exergo-environmental analysis of a combustion gas turbine system subjected to inlet air cooling and evaporative after cooling of the compressor discharge. Masters thesis, King Fahd University of Petroleum and Minerals.

Development and Characterization of Alumina-CNT Nano-composite Membranes for Water Filtration Applications. Masters thesis, King Fahd University of Petroleum and Minerals.

Graphene Oxide based membrane for water purification application. Masters thesis, King Fahd University of Petroleum and Minerals.

Nonlinear Structural Mechanics of Electrically Actuated Carbon Nanotube based NEMS Devices using A Higher-order Strain Gradient Theory. Masters thesis, King Fahd University of Petroleum and Minerals.

Thermodynamic Balancing of the Regeneration Process in a Novel Liquid Desiccant Cooling System by Extraction Technology. Masters thesis, King Fahd University of Petroleum and Minerals.

The Design and Simulation of a Chemical Looping Combustion System. Masters thesis, King Fahd University of Petroleum and Minerals.

Effects of microstructure and densification of Fe-Cr-Mo-based alloy on the corrosion performance in chloride environments. Masters thesis, King Fahd University of Petroleum and Minerals.

Dynamic Response of Initially Deformed and Imperfect Bi-stable Microbeams Under the Combined Effect of Mechanical Shock Loads and Electrostatic Forces. Masters thesis, King Fahd University of Petroleum and Minerals.

Numerical and Experimental Investigations on the Freezing of CNT-Water Nanofluids in a Rectangular Cavity. Masters thesis, King Fahd University of Petroleum and Minerals.

Exergo-economic Analysis of Multi Effect Mechanical Vapor Compression Desalination System. Masters thesis, King Fahd University of Petroleum and Minerals.

Study the effect of liquid impingement corrosion/erosion with and without solid particles on two pipe line grades API X 65 & Mild Steel AISI 1030. Masters thesis, King Fahd University of Petroleum and Minerals.

Computational Model for Multiaxial Fatigue Notch Analysis. Masters thesis, King Fahd University of Petroleum and Minerals.

Development of two-phase reinforced alumina nanocomposites for cutting tools applications. PhD thesis, King Fahd University of Petroleum and Minerals.

Microstructure and Tribology of Fe-Cr-Mo-Based alloy fabricated using Spark Plasma Sintering. Masters thesis, King Fahd University of Petroleum and Minerals.

Development of Mechanically Robust Water-Repellant Surfaces. Masters thesis, King Fahd University of Petroleum and Minerals.

Transient Thermodynamic Analysis of Generator in a Solar Absorption System Designed for Hot and Humid Regions. Masters thesis, King Fahd University of Petroleum and Minerals.

Development of Transparent Superhydrophobic and Self-Cleaning Surfaces. Masters thesis, King Fahd University of Petroleum and Minerals.

Effects of Oscillatory Motion on the Wave Propagation in Beams. Masters thesis, King Fahd University of Petroleum and Minerals.

Optimum selection of renewable energy powered desalination systems. Masters thesis, King Fahd University of Petroleum and Minerals.

Modified Multi Effect Desalination Systems With Mechanical Vapor Compression. Masters thesis, King Fahd University of Petroleum and Minerals.

Air and Water Gap Multistage Membrane Distillation Systems for Water Desalination. Masters thesis, King Fahd University of Petroleum and Minerals.

Thermally Rearranged Polymeric Membrane for Natural Gas Separation. Masters thesis, King Fahd University of Petroleum and Minerals.

HYBRID POLYMERIC/CERAMIC MEMBRANE FOR OXY-FUEL COMBUSTION APPLICATIONS. Masters thesis, King Fahd University of Petroleum and Minerals.

Computational Aspects of a Multiscale Modeling Approach for Heterogeneous Materials under Multiphysical Loadings. PhD thesis, King Fahd University of Petroleum and Minerals.

Integrated Solar Absorption Cooling and Membrane Distillation Systems - A Theoritical Study. Masters thesis, King Fahd University of Petroleum and Minerals.

COMPUTATIONAL FLUID DYNAMIC AND HEAT TRANSFER MODELING OF STIRLING ENGINE. Masters thesis, King Fahd University of Petroleum and Minerals.

EFFECT OF INCLINATION, WATER CUT, BETA RATIO AND VISCOSITY ON VENTURI PRESSURE DROP MEASUREMENTS FOR OIL-WATER FLOW EXPERIMENTS. Masters thesis, King Fahd University of Petroleum and Minerals.

Processing and Thermal Behaviour of Alumina Hybrid Nanocomposites. Masters thesis, King Fahd University of Petroleum and Minerals.

Development of Tungsten-Rhenium base Pin Tool for Friction Stir Welding of Steel. PhD thesis, King Fahd University of Petroleum and Minerals.

Drag Reduction by Additives in Multiphase Flow in Pipes. PhD thesis, King Fahd University of Petroleum and Minerals.

Graphene-Implanted Metal Organic Frameworks as Potential Adsorbents for Solar Adsorption Refrigeration Systems. PhD thesis, King Fahd University of Petroleum and Minerals.

Development of thermo-chemical model and exergetic assessment of a biomass derived syngas fueled combined cycle for cogeneration of power and cooling. Masters thesis, King Fahd University of Petroleum and Minerals.

Modeling of Spark Plasma Sintering Process. Masters thesis, King Fahd University of Petroleum and Minerals.