(2005) Ultrasonic wave transmission in periodically undulated plates. Ultrasonics, Ferroelectrics and Frequency Control, IEEE Transactions on, 52.

(2005) Two-dimensional vibration suppression in machining a smooth surface with uniform cross section and zero modulation. Control and Automation, 2005. ICCA '05. International conference, 2.

A nonlinear PID servo controller for computer hard disk drives. Advanced Motion Control, 2006. 9th IEEE International Workshop on, 1.

(1996) Current-mode universal filters using unity-gain cells. Electronics Letters, 32.

(1998) A new current-controlled multiphase sinusoidal oscillator usingtranslinear current conveyors. Circuits and Systems II: Analog and Digital Signal Processing, IEEE Transactions on [see also Circuits and Systems II: Express Briefs, IEEE Transactions on], 45.

(1990) A new moment-dependent method of probability distributionidentification. Uncertainty Modeling and Analysis, 1990. Proceedings., First International Symposium on, 1.

(2001) Capturing outline of fonts using genetic algorithm and splines. Information Visualisation, 2001. Proceedings. Fifth International conference, 1.

(2004) Cryogenic drilling of KevlarTM composite laminates. Masters thesis, King Fahd University of Petroleum and Minerals.

(2006) Experimental and numerical analyses of mixed mode crack initiation angle. Masters thesis, King Fahd University of Petroleum and Minerals.

(2005) Effect of piezoelectric actuator placement on controlling the modes of vibration for flexible structures. Masters thesis, King Fahd University of Petroleum and Minerals.

(2005) Finite element analysis of stick-slip vibrations in drillstrings. Masters thesis, King Fahd University of Petroleum and Minerals.

(2005) Prediction of turbulent heat transfer in a rotating narrow rectangular channel (AR=10) oriented at 120° from the direction of rotation. Masters thesis, King Fahd University of Petroleum and Minerals.

(2005) Continuous proximate time-optimal control for a third order servomechanism having a plant with three real roots. Masters thesis, King Fahd University of Petroleum and Minerals.

(2004) Entropy generation around a solid sphere in a gas stream. Masters thesis, King Fahd University of Petroleum and Minerals.

(2005) A study of the static and dynamic properties of Al-Based A1₂O₃ metal matrix composites. Masters thesis, King Fahd University of Petroleum and Minerals.

(2004) Effect of bolt layout on the mechanical behavior of bolted joint. Masters thesis, King Fahd University of Petroleum and Minerals.

(2005) Numerical investigation of erosion of a pipe protruded in a sudden contraction. Masters thesis, King Fahd University of Petroleum and Minerals.

(2005) The effect of environmental conditions on the hydrostatic burst pressure and impact performance of glass fiber reinforced thermoset pipes. Masters thesis, King Fahd University of Petroleum and Minerals.

(2005) Effects of strain rate and temperature on fracture toughness and tensile properties of CPVC. Masters thesis, King Fahd University of Petroleum and Minerals.

(2004) Design, rating and exergy analysis of evaporative heat exchangers. Masters thesis, King Fahd University of Petroleum and Minerals.

(2005) Laser evaporative heating in relation to machining. Masters thesis, King Fahd University of Petroleum and Minerals.

(2004) Effect of frequency on crack propagation in CPVC and HDPE at different temperatures. Masters thesis, King Fahd University of Petroleum and Minerals.

(2005) Laminar mixed convection in vertical channels. Masters thesis, King Fahd University of Petroleum and Minerals.

(2006) Effect of environment on the fatigue and the tensile properties of glass fiber reinforced vinyl ester and epoxy thermosets. Masters thesis, King Fahd University of Petroleum and Minerals.

(1999) Wind tunnel testing of an airfoil with a moving surface boundary-layer control. Masters thesis, King Fahd University of Petroleum and Minerals.

(1999) The effect of aging on the fatigue strength of alloy 800HT. Masters thesis, King Fahd University of Petroleum and Minerals.

(2001) Analytical and finite element investigation of initial clearance effect on tube-to-tubesheet joint strength. Masters thesis, King Fahd University of Petroleum and Minerals.

(1996) Quantitative and subjective assessments of indoor air quality in KFUPM buildings. Masters thesis, King Fahd University of Petroleum and Minerals.

(1993) Performance evaluation and multiobjective optimization of passive vehicle suspension systems. Masters thesis, King Fahd University of Petroleum and Minerals.

(1990) Prediction of species concentration and temperature profile in methanol oxygen and argon flame. Masters thesis, King Fahd University of Petroleum and Minerals.

(1994) Identification of block cascade models of nonlinear systems. Masters thesis, King Fahd University of Petroleum and Minerals.

(2003) Test facility development for small centrifugal compressors (design stage). Masters thesis, King Fahd University of Petroleum and Minerals.

(1996) Vibration control of rotor-bearing systems using neural networks. Masters thesis, King Fahd University of Petroleum and Minerals.

(1995) Calculations of turbulent flow and heat transfer in periodically converging-diverging channels. Masters thesis, King Fahd University of Petroleum and Minerals.

(1994) Mixed convection from a horizontal cylinder rotating in a cooling cross-stream. Masters thesis, King Fahd University of Petroleum and Minerals.

(1993) Heat transfer mechanisms governing laser metal interactions. Masters thesis, King Fahd University of Petroleum and Minerals.

(1989) Second law analysis and optimization of solar hot water systems. Masters thesis, King Fahd University of Petroleum and Minerals.

(2004) Investigations on the influence of disk location and unbalance on fluid induced vibrations of a shaft-disk-bearing system. Masters thesis, King Fahd University of Petroleum and Minerals.

(1993) Calculations of fluid flow and heat transfer in expanding ducts. Masters thesis, King Fahd University of Petroleum and Minerals.

(2002) Carburization behavior of iron-based alloys in methane/hydrogen gas mixtures. PhD thesis, King Fahd University of Petroleum and Minerals.

(1994) Nonholonomic motion planning for wheeled mobile systems using geometric phases. Masters thesis, King Fahd University of Petroleum and Minerals.

(1998) Some quality and reliability aspcts of aluminium extrusion process. Masters thesis, King Fahd University of Petroleum and Minerals.

(1995) Investigation of fatigue crack growth rates under variable amplitude loading. Masters thesis, King Fahd University of Petroleum and Minerals.

(1997) Mathematical modeling and optimization of precipitation hardening of extrudable aluminium alloys. Masters thesis, King Fahd University of Petroleum and Minerals.

(2002) Finite element modeling and analysis of rotor-bearing systems. Masters thesis, King Fahd University of Petroleum and Minerals.

(1992) Supersonic jet impingement on a flat surface at angles from -5° to 30°. Masters thesis, King Fahd University of Petroleum and Minerals.

(1986) Heat transfer characteristics of ice solidification using a two-phase closed thermosyphon. Masters thesis, King Fahd University of Petroleum and Minerals.

(2004) Modeling and analysis of extrusion pressure and die life for complex aluminum profiles. PhD thesis, King Fahd University of Petroleum and Minerals.

(1995) Forced flow in the entry region of concentric annuli with impulsively rotated inner walls. Masters thesis, King Fahd University of Petroleum and Minerals.

(1994) Control of hypersonic flight trajectories to minimize heat load. Masters thesis, King Fahd University of Petroleum and Minerals.

(1996) Performance evaluation of a new type of titanium nitride (TiN) coated twist drill. Masters thesis, King Fahd University of Petroleum and Minerals.

(1998) Conjugate natural convection heat transfer in vertical coconcentric annuli. Masters thesis, King Fahd University of Petroleum and Minerals.

(2001) Conduction and non-conduction limited laser heating process- mathematical simulation. Masters thesis, King Fahd University of Petroleum and Minerals.

(2003) Optimization of a packaged air conditioning unit performance using an experimentally validated CFD model. Masters thesis, King Fahd University of Petroleum and Minerals.

(2002) Finite element dynamic analysis of drillstring. Masters thesis, King Fahd University of Petroleum and Minerals.

(1997) Second-law-based thermoeconomic analysis and optimization of thermal-energy-storage systems. Masters thesis, King Fahd University of Petroleum and Minerals.

(1990) Reliable life prediction models for various material damage processes. Masters thesis, King Fahd University of Petroleum and Minerals.

(2000) Heat and mass transfer analysis of liquid desiccant-air contact system in a gauze-type structured packing tower. Masters thesis, King Fahd University of Petroleum and Minerals.

(2002) Energy and exergy analyses of crude oil distillation plants. Masters thesis, King Fahd University of Petroleum and Minerals.

(2000) Transient temperature distibution in a tubesheet of a fixed tubesheet heat exchanger. Masters thesis, King Fahd University of Petroleum and Minerals.

(1991) Numerical investigation of laminar natural convection flows in obstructed vertical channels. Masters thesis, King Fahd University of Petroleum and Minerals.

(1997) Finite element dynamic analysis of multibody rotor-bearing system with cracked shaft. PhD thesis, King Fahd University of Petroleum and Minerals.

(1995) Heat transfer in eccentric annuli. PhD thesis, King Fahd University of Petroleum and Minerals.

(1992) Coupled bending torsional vibration of rotating shafts using finite element. Masters thesis, King Fahd University of Petroleum and Minerals.

(1995) Reliability-based maintenance strategies for heat exchanges subject to fouling. Masters thesis, King Fahd University of Petroleum and Minerals.

(1999) Transient response of varying thickness timoshenko beam under point load. Masters thesis, King Fahd University of Petroleum and Minerals.

(1998) Heat convection from an oscillating cylinder. PhD thesis, King Fahd University of Petroleum and Minerals.

(2004) Impact testing of brittle materials using split hopkinson pressure bar technique. Masters thesis, King Fahd University of Petroleum and Minerals.

(1995) Effect of heat treatment on the flow induced corrosion of aluminum-SiC(p). Masters thesis, King Fahd University of Petroleum and Minerals.

(2000) Effect of temperature on the fatigue behavior of plain weave woven carbon fabric-reinforced composite plastic. Masters thesis, King Fahd University of Petroleum and Minerals.

(1999) Investigation of mixed mode crack initiation angles under different loading conditions. Masters thesis, King Fahd University of Petroleum and Minerals.

(1997) Design and performance evaluation of refrigeration systems using thermodynamic models. Masters thesis, King Fahd University of Petroleum and Minerals.

(1996) Effect of thermal-hydraulic parameters on CaCO₃ scalling in heat exchangers. Masters thesis, King Fahd University of Petroleum and Minerals.

(1996) Numerical simulation of turbulent natural convection in enclosures. Masters thesis, King Fahd University of Petroleum and Minerals.

(1993) Modelling and antiswing control of overhead cranes. Masters thesis, King Fahd University of Petroleum and Minerals.

(1992) Second-law-based thermodynamic analysis of vapor-compression refrigeration cycles. Masters thesis, King Fahd University of Petroleum and Minerals.

(1993) Weibull analysis of cutting tools and dies. Masters thesis, King Fahd University of Petroleum and Minerals.

(2002) Thermo-mechanical modeling of tool and workpiece interface in metal forming process. Masters thesis, King Fahd University of Petroleum and Minerals.

(2002) Conjugate free convection heat transfer in vertical eccentric annuli. Masters thesis, King Fahd University of Petroleum and Minerals.

(1992) Optimal assessment of using solar and wind power for desalination on the Eastern coast of Saudi Arabia. Masters thesis, King Fahd University of Petroleum and Minerals.

(2000) Crack propagation in CPVC at different temperatures. Masters thesis, King Fahd University of Petroleum and Minerals.

(1998) Numerical investigation of pulsating flows in abrupt expansion pipes. Masters thesis, King Fahd University of Petroleum and Minerals.

(1997) A Robust design methodology for structural control using piezoelectric materials. Masters thesis, King Fahd University of Petroleum and Minerals.

(1999) Torsional vibrations analysis of a synchronous motor-compressor drive train. Masters thesis, King Fahd University of Petroleum and Minerals.

(1997) Performance evaluation of shell-and-tube heat exchangers: a numerical approach. Masters thesis, King Fahd University of Petroleum and Minerals.

(1997) Role of sodium chloride in low temperaturs hot corrosion of superalloys. Masters thesis, King Fahd University of Petroleum and Minerals.

(2001) Investigation of heat and moisture transfer during solids drying. Masters thesis, King Fahd University of Petroleum and Minerals.

(1999) Conjugate forced convection heat transfer in eccentric annuli. Masters thesis, King Fahd University of Petroleum and Minerals.

(1990) Determining velocity, temperature and occupancy comfort within a 3-D room. Masters thesis, King Fahd University of Petroleum and Minerals.

(1996) Analysis of turbulent transport properties in the near field of an isothermal free jet. Masters thesis, King Fahd University of Petroleum and Minerals.

(2004) Transient impulsive flow about a sphere in a gas stream. Masters thesis, King Fahd University of Petroleum and Minerals.

(1992) Fatigue life predictions of notched members in Arabian Gulf Water. Masters thesis, King Fahd University of Petroleum and Minerals.

(2001) Dynamic response of fluid-loaded composite plates to stationary and moving loads. Masters thesis, King Fahd University of Petroleum and Minerals.

(1996) An experimental investigation of heat transfer in the thermally developing region of a pulsating pipe flow. Masters thesis, King Fahd University of Petroleum and Minerals.

(1988) Integral methods for transpired boundary layer flow. Masters thesis, King Fahd University of Petroleum and Minerals.

(1996) Fatigue damage characterization and life prediction in carbon fiber reinforced plastic composites. Masters thesis, King Fahd University of Petroleum and Minerals.

(1979) A Comoputer-assisted analysis for thermodynamic processes and cycles. Masters thesis, King Fahd University of Petroleum and Minerals.

(2001) Sulfide stress cracking of dissimilar metal welds. Masters thesis, King Fahd University of Petroleum and Minerals.

(2003) A Study of tensile and microhardness properties of m-LLDPE/LDPE blends. Masters thesis, King Fahd University of Petroleum and Minerals.

(1989) Vibration analysis of point and column supported mindlin plates. Masters thesis, King Fahd University of Petroleum and Minerals.

(2003) Performance evaluation of (HVOF) thermal spray coating using INCONEL-625 powder. Masters thesis, King Fahd University of Petroleum and Minerals.

(1997) An experimental investigation for the effect of pulsation on heat transfer characteristics in pipes. Masters thesis, King Fahd University of Petroleum and Minerals.

(1998) Effects of blending MTBE, methanol, or ethanol with gasoline on performance and exhaust emissions of SI engines. Masters thesis, King Fahd University of Petroleum and Minerals.

(1994) Design of composite die for wire drawing. Masters thesis, King Fahd University of Petroleum and Minerals.

(1990) Vibration frequencies of rotating tapered beam including rotary inertia and transverse shear deformation. Masters thesis, King Fahd University of Petroleum and Minerals.

(1995) Dynamic modeling and analysis of axially moving beam with prismatic and revolute joints. PhD thesis, King Fahd University of Petroleum and Minerals.

(1992) Experimental determination of heat transfer coefficient for water-lithium bromide mixture. Masters thesis, King Fahd University of Petroleum and Minerals.

(2005) Finite element analysis of stick-slip vibrations in drillstrings. Masters thesis, King Fahd University of Petroleum and Minerals.

(1999) Design and performance evaluation of evaporative cooling towers. Masters thesis, King Fahd University of Petroleum and Minerals.

(2002) Fouling analysis and its mitigation in heat exchangers. PhD thesis, King Fahd University of Petroleum and Minerals.

(1994) Energy and exergy analysis of Ghazlan Power Plant. Masters thesis, King Fahd University of Petroleum and Minerals.

(2001) The Effect of temperature dependent viscosity variation on the performance of heat exchangers. Masters thesis, King Fahd University of Petroleum and Minerals.

(1993) An expert system for designing hydrodynamic journal bearings. Masters thesis, King Fahd University of Petroleum and Minerals.

(2002) Wakel flow with varying separatin points. PhD thesis, King Fahd University of Petroleum and Minerals.

(2002) Oxidation/carburization behavior of high temperature alloys. Masters thesis, King Fahd University of Petroleum and Minerals.

(1992) Unsteady natural convection in open ended vertical concentric annuli. Masters thesis, King Fahd University of Petroleum and Minerals.

(1995) Assessment, prediction and enhancement of the reliability of extrusion dies. Masters thesis, King Fahd University of Petroleum and Minerals.

(1992) Experimental investigations of the vortex flow behind a circular cone at high angles of attack. Masters thesis, King Fahd University of Petroleum and Minerals.

(2003) Transiently developing free and opposing jets in relation to gas-assisted laser evaporative heating process. Masters thesis, King Fahd University of Petroleum and Minerals.

(2005) Effect of piezoelectric actuator placement on controlling the modes of vibration for flexible structures. Masters thesis, King Fahd University of Petroleum and Minerals.

(2006) Experimental and numerical analyses of mixed mode crack initiation angle. Masters thesis, King Fahd University of Petroleum and Minerals.

(1988) A generalized approach to the machining economics optimization. Masters thesis, King Fahd University of Petroleum and Minerals.

(1996) Analysis of fluid flow and heat transfer around and inside a liquid sphere. PhD thesis, King Fahd University of Petroleum and Minerals.

(2001) Weibull reliability analysis and maintenance strategies of rotating equipment. Masters thesis, King Fahd University of Petroleum and Minerals.

(2003) Natural convection flow in parallel-plate vertical channels. Masters thesis, King Fahd University of Petroleum and Minerals.

(1990) Modelling of chemical kinetics of methane/nitrogen dioxide/oxygen flames. Masters thesis, King Fahd University of Petroleum and Minerals.

(1995) Computational study of the flowfield through a cascade of NACA 0012 Airfoils. Masters thesis, King Fahd University of Petroleum and Minerals.

(1992) Numerical simulation of ice crystal growth (initial frosting process). Masters thesis, King Fahd University of Petroleum and Minerals.

(1982) Analysis of turbulent, axisymmetric, dense jets discharged to quiescent, uniform or stratified ambients. Masters thesis, King Fahd University of Petroleum and Minerals.

(1988) Investigations on a flat, square plate at high incidence in a low speed flow. Masters thesis, King Fahd University of Petroleum and Minerals.

(1996) Mixed convection from an elliptic tube placed in a fluctuating free stream. PhD thesis, King Fahd University of Petroleum and Minerals.

(1984) Stochastic approach for modeling machining process variables. Masters thesis, King Fahd University of Petroleum and Minerals.

(1981) Effect of speed control humps on vehicle dynamics. Masters thesis, King Fahd University of Petroleum and Minerals.

(1985) Heat convection from a horizontal cylinder in a quiescent fluid. Masters thesis, King Fahd University of Petroleum and Minerals.

(2005) Effect of outflow orientation and multiple jets orifice plate configurations on heat transfer in a rectangular duct. Masters thesis, King Fahd University of Petroleum and Minerals.

(1997) Liquid desiccant and its application for pipeline drying. Masters thesis, King Fahd University of Petroleum and Minerals.

(1996) Three-dimensional transient temperature analysis of friction welding of cylindrical bars. Masters thesis, King Fahd University of Petroleum and Minerals.

(1987) Experiments on a flat square plate at high angles of attack. Masters thesis, King Fahd University of Petroleum and Minerals.

(1996) Hybrid liquid desiccant based air-conditioning system. Masters thesis, King Fahd University of Petroleum and Minerals.

(2000) Detection of a transverse crack in a rotating shaft using wavelet transform. Masters thesis, King Fahd University of Petroleum and Minerals.

(2000) An experimental investigation of stall characteristics in a vaneless diffuser. PhD thesis, King Fahd University of Petroleum and Minerals.

(1996) Analysis of turbulent transport properties in a swirling flow of a Can-type combustor. Masters thesis, King Fahd University of Petroleum and Minerals.

(2001) Effect of intermetallic phases on corrosion of Aluminum-Silicon Carbide (Al-SiCp) composites. Masters thesis, King Fahd University of Petroleum and Minerals.

(2005) Modelling of blood flow in a time-varying shape passage. Masters thesis, King Fahd University of Petroleum and Minerals.

(1993) Comparative study of different methods of vibration control of rotor bearing systems. Masters thesis, King Fahd University of Petroleum and Minerals.

(1986) Analytical calculation of bow shock waves from delta shaped supersonic lifting wings. Masters thesis, King Fahd University of Petroleum and Minerals.

(1997) A methodology for the optimization of rolling process. Masters thesis, King Fahd University of Petroleum and Minerals.

(2002) A Study of dehumidification and regeneration processes in a hybrid cooling system. Masters thesis, King Fahd University of Petroleum and Minerals.

(1976) Tooth tip losses in external gear pumps. Masters thesis, King Fahd University of Petroleum and Minerals.

(1997) Surface roughness measurement using laser detection technique. Masters thesis, King Fahd University of Petroleum and Minerals.

(1993) Heat Transfer Mechanisms Governing Laser Metal Interactions. Masters thesis, KING FAHD UNIVERSITY OF PETROLEUM & MINERALS.

(1993) Performance Evaluation and Multiobjective Optimization of Passive Vehicle Suspension Systems. Masters thesis, KING FAHD UNIVERSITY OF PETROLEUM & MINERALS.

(1992) Supersonic Jet Impingement on a Flat Surface at Angles from -50 to -300. Masters thesis, KING FAHD UNIVERSITY OF PETROLEUM & MINERALS.

(1992) Coupled Bending Torsional Vibration of Rotating Shafts Using Finite Element. Masters thesis, KING FAHD UNIVERSITY OF PETROLEUM & MINERALS.

(1993) Weilbull Analysis of Cutting Tools and Dies. Masters thesis, KING FAHD UNIVERSITY OF PETROLEUM & MINERALS.

(1993) Modelling and Antiswing Control of Overhead Cranes. Masters thesis, KING FAHD UNIVERSITY OF PETROLEUM & MINERALS.

(1992) Second-Law-Based Thermodynamic Analysis of Vapor-Compression Refrigeration Cycles. Masters thesis, KING FAHD UNIVERSITY OF PETROLEUM & MINERALS.

(1992) Optimal Assessment of Using Solar and Wind Power for Desalination on the Eastern Coast of Saudi Arabia. Masters thesis, KING FAHD UNIVERSITY OF PETROLEUM & MINERALS.

(1992) Fatigue Life Predictions of Notched Members in Arabian Gulf Water. Masters thesis, KING FAHD UNIVERSITY OF PETROLEUM & MINERALS.

(1992) Experimental Determination of Heat Transfer Coefficient for Water-Lithium Bromide Mixture. Masters thesis, KING FAHD UNIVERSITY OF PETROLEUM & MINERALS.

(1993) An Expert System for Designing Hydrodynamic Journal Bearings. Masters thesis, KING FAHD UNIVERSITY OF PETROLEUM & MINERALS.

(1992) Unsteady Natural Convection in Open Ended Vertical Concentric Annuli. Masters thesis, KING FAHD UNIVERSITY OF PETROLEUM & MINERALS.

(1992) Numerical Simulation of Ice Crystal Growth (Initial Frosting Process). Masters thesis, KING FAHD UNIVERSITY OF PETROLEUM & MINERALS.

SOME OBSERVATIONS ON PRESSURE DISTRIBUTION AND DIE FAILURE MODES IN HOT EXTRUSION. The 6th Saudi Engineering Conference, KFUPM, Dhahran, December 2002.

CORROSION BEHAVIOR OF POWDER METALLURGY ALUMINUM ALLOY 6061/AL2O3 METAL MATRIX COMPOSITES. The 6th Saudi Engineering Conference, KFUPM, Dhahran, December 2002.

RELIABILITY OF DISSIMILAR METAL WELDS SUBJECTED TO SULFIDE STRESS CRACKING. The 6th Saudi Engineering Conference, KFUPM, Dhahran, December 2002.

FATIGUE DAMAGE IN WOVEN CARBON FABRIC/EPOXY LAMINATES AT NON-AMBIENT TEMPERATURES. The 6th Saudi Engineering Conference, KFUPM, Dhahran, December 2002.

FINITE ELEMENT INVESTIGATION OF INITIAL CLEARANCE EFFECT ON TUBE-TO-TUBESHEET JOINT STRENGTH. The 6th Saudi Engineering Conference, KFUPM, Dhahran, December 2002.

ON THE INVESTIGATION OF VIBRATION SIGNALS USING JOINT TIME FREQUENCY ANALYSIS. The 6th Saudi Engineering Conference, KFUPM, Dhahran, December 2002.

TIP DEFLECTION ESTIMATION OF A ROTATING CANTILEVERED BEAM. The 6th Saudi Engineering Conference, KFUPM, Dhahran, December 2002.

EXPERIMENTAL STUDY OF HYBRID LIQUID DESICCANT BASED VAPOR COMPRESSION COOLING SYSTEM. The 6th Saudi Engineering Conference, KFUPM, Dhahran, December 2002.

THE USE OF AN OPEN CYCLE ABSORPTION SYSTEM IN AUTOMOBILES AS AN ALTERNATIVE TO CFCS. The 6th Saudi Engineering Conference, KFUPM, Dhahran, December 2002.

FUEL CONSUMPTION OF A SPARK IGNITION ENGINE BLENDED WITH MTBE. The 6th Saudi Engineering Conference, KFUPM, Dhahran, December 2002.

THE ENGINEERING PROFESSION AND THE PROFESSIONAL ENGINEER. The 6th Saudi Engineering Conference, KFUPM, Dhahran, December 2002.

A SIMPLIFIED ANALYSIS OF EDGE SETTLEMENT OF A LARGE ABOVEGROUND LIQUID STORAGE TANK. The 6th Saudi Engineering Conference, KFUPM, Dhahran, December 2002.

(2005) Conjugate Effects on Steady Laminar Natural Convection Heat Transfer in Vertical Eccentric Annuli. International Journal for Computational Methods in Engineering Science and Mechanics, 6 (4). pp. 235-250.

An improved non-dimensional model of wet-cooling towers. PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART E-JOURNAL OF PROCESS MECHANICAL ENGINEERING 220 , 2005.

A comprehensive design and rating study of evaporative coolers and condensers. Part II. Sensitivity analysis. International Journal of Refrigeration 29 (2006) 659–668.

A comprehensive design and rating study of evaporative coolers and condensers. Part I. Performance evaluation. International Journal of Refrigeration 29 (2006) 645–658.