Items where Department is "Chemical Engineering" and Year is 2011
 | Up a level |
Thesis
SYNTHESIS AND CHARACTERIZATION OF ACTIVATED CARBON PREPARED FROM PALM SEEDS AND APPLICATIONS FOR 4- CHLOROPHENOL REMOVAL FROM AQUEOUS SOLUTION. Masters thesis, King Fahd University of Petroleum and Minerals.
Polymerization of Ethylene using Metallocene and Zeigler Natta catalyst with doped-Nanotitania. Masters thesis, King Fahd University of Petroleum and Minerals.
PROCESSABILITY AND INSTABILITIES OF POLYOLEFINORGANOCLAY NANOCOMPOSITES IN A SINGLE SCREW EXTRUDER. PhD thesis, King Fahd University of Petroleum and Minerals.
TRANSPORT PROPERTIES OF GASES IN POLYETHYLENE/CLAY NANOCOMPOSITES. Masters thesis, King Fahd University of Petroleum and Minerals.
ethylbenzene dehydrogenation to styrene over mesoporous mixed oxide catalysts- synthesis, characterization and kinetic modeling. Masters thesis, King Fahd University of Petroleum and Minerals.
Development of Methanol Electro-oxidation Catalysts for Direct Methanol Fuel Cell Application. PhD thesis, King Fahd University of Petroleum and Minerals.
NOVEL METHOD USING NANOMATERIALS FOR REMOVAL OF E. COLI BACTERIA FROM WATER. Masters thesis, King Fahd University of Petroleum and Minerals.
SYNTHESIS OF CARBON NANOTUBES BY ORIFICE-CHEMICAL VAPOR DEPOSITION REACTOR AND APPLICATIONS IN STYRENE POLYMERIZATION AND NANOCOMPOSITES. PhD thesis, King Fahd University of Petroleum and Minerals.
Laboratory Evaluation of Acid Diversion by Viscoelastic Surfactant in Carbonate Reservoirs. Masters thesis, King Fahd University of Petroleum and Minerals.
REMOVAL OF HEXAVALENT CHROMIUM AND CADMIUM FROM WATER USING CARBON BASED ADSORBENTS. PhD thesis, King Fahd University of Petroleum and Minerals.
Hydrodesulfurization of Benzothiophene and Dibenzothiophenes over Phosphorus modified CoMo/Al2O3. Masters thesis, King Fahd University of Petroleum and Minerals.
EXPERIMENTAL INVESTIGATION OF HEAT TRANSFER CHARACTERIZATION FOR CNT-NANOFLUID IN HEAT EXCHANGERS. Masters thesis, King Fahd University of Petroleum and Minerals.
(2011) Propylene by Oxidative Dehydrogenation of Propane over Mixed Metal Oxide Catalysts. Masters thesis, King Fahd University of Petroleum and Minerals.
(2011) Propylene by Oxidative Dehydrogenation of Propane over Mixed Metal Oxide Catalysts. Masters thesis, King Fahd University of Petroleum and Minerals.
(2010) Characterization of Low Density Polyethylene/Oil Fly Ash Composites and Impact of Surface Modification of Fly Ash on composite Properties. Masters thesis, King Fahd University of Petroleum and Minerals.
(2010) Effect of Surface Modification of Carbon Nanotubes (CNT) on the Mechanical and Thermal Properties of Polypropylene/CNT Nanocomposites. Masters thesis, King Fahd University of Petroleum and Minerals.