Concrete repair with silica fume shotcrete

(1995) Concrete repair with silica fume shotcrete. Masters thesis, King Fahd University of Petroleum and Minerals.

[img]
Preview
PDF
10408.pdf

Download (10MB) | Preview

Arabic Abstract

تحلل هذه الدراسة وتناقش عملية التقييم الوصفي وأعمال الترميم التي جرى تنفيذها من أجل تقوية عمود أنبوبي من الخرسانة المسلحة يحمل فرناً دواراً ضد اجهادات اللي . وكانت هذه الاجهادات قد أدت إلآ ظهور شقوق وتشظية على طول الفاصل الانشائي الواقع بين جدران العمود ومنصته العلوية بالإضافة إلى شقوق قصية مائلة على أسطح الجدران . يتكون نظام الترميم المنفذ من إنشاء غلاف من الشوت كريت (أو الغونيت ، وهي خرسانة تليط بضاغط هوائي) المسلح والمعامل بدخان السيليكا بسماكة 24 سم حول الأسطح الخارجية لجدران المنشأ ، هذا بالإضافة إلى استخدام ألواح فولاذية ملصقة بواسطة الأيبوكسي لتقوية الفاصل الانشائي الضعيف . وفي تقييم لنظام الترميم هذا بعد مرور ثلاثين شهراً على الانتهاء منه تعرض الفرن خلالها لعدة دورات من التشغيل والتوقف لم تظهر أية عيوب ناتجة عن اجهادات اللي . بالإضافة إلى مناقشة فحوصات التقييم المذكور ، تعرض وتناقش هذه الدراسة أيضاً نتائج بعض الفحوصات التي أجريت بهدف التحقق من صحة عدة فرضيات متعلقة بالأعمال المنفذة .

English Abstract

This study analyzes and discusses the diagnostic evaluation process and the repair works performed to strengthen a tubular reinforced concrete pier againts torsional stresses. This pier, which carries a rotary kiln, manifested cracking and spalling at its platform/wall joint and diagonal shear cracking on the wall surfaces as a result of these stresses. The strengthening system utilized consists of casting a reinforced 240-mm thick SF shotcrete jacket around the exterior of the structure, in addition to the use of epoxy-bonded steel plates to further reinforce the deteriorated platform/wall joint. This system was evaluated 30 months after its completion, during which the kiln was subjected to several cycles of firing and shutdowns. No defects resulting from torsional stresses were found. Description and results of the repair evaluation tests, as well as other tests carried out to verify the validity of several hypotheses related to the works performed, are also presented and discussed.

Item Type: Thesis (Masters)
Subjects: Architectural
Department: College of Design and Built Environment > Architectural Engineering and Construction Management
Committee Advisor: Bubshait, Abdulaziz A.
Committee Members: Jannadi, M. Osama A. and Al-Gahtani, Ahmad S.
Depositing User: Mr. Admin Admin
Date Deposited: 22 Jun 2008 14:04
Last Modified: 01 Nov 2019 14:00
URI: http://eprints.kfupm.edu.sa/id/eprint/10408