KFUPM ePrints

Items where Year is 1995

Up a level
Export as [feed] RSS 2.0 [feed] RSS 1.0 [feed] Atom
Group by: Creators | Item Type | No Grouping
Jump to: A | B | C | D | E | F | H | J | K | M | O | R | S | T | Y
Number of items: 122.

A

Abba, AlHaji Ibrahim (1995) Modeling of Multicomponent gas-solid reactions. Masters thesis, King Fahd University of Petroleum and Minerals.

Abdel-Magid, Y.L. and Dawoud, M.M. (1995) Genetic algorithms applications in load frequency control. Genetic Algorithms in Engineering Systems: Innovations and Applications, 1995. GALESIA. First International conference (Conf. Publ. No. 414), 1.

Abdel-Magid, Y.L. and Dawoud, M.M. (1995) Tuning of AGC of interconnected reheat thermal systems with geneticalgorithms. Systems, Man and Cybernetics, 1995. Intelligent Systems for the 21st Century., IEEE International conference, 3.

Abdel-Salam, M. and Al-Hamouz, Z. (1995) A finite-element analysis of bipolar ionized field. Industry Applications, IEEE Transactions on, 31.

Abdelrazig, Abdalla Abdelrahman (1995) Computerized AHP model for solving Bid/no-Bid decision problem. Masters thesis, King Fahd University of Petroleum and Minerals.

Abdulla, Abdul Hai Mohammed (1995) Reliability of modular fault-tolerant hypercube networks. Masters thesis, King Fahd University of Petroleum and Minerals.

Abu-Mutlaq, Maher Hamdan Khalil (1995) Dataflow processor for back propagation nueral networks: architecture and performance evaluation. Masters thesis, King Fahd University of Petroleum and Minerals.

Abu-Saleh, Hazem Muhebbadin Ahmad Naji (1995) AutoVLSI system: a layout system for general-cell VLSI design. Masters thesis, King Fahd University of Petroleum and Minerals.

Abuelma’atti, M.T. (1995) Harmonic and intermodulation performance of linear delta modulators. Instrumentation and Measurement, IEEE Transactions on, 44.

Abuelma’atti, M.T. (1995) Radio frequency interference by demodulation mechanisms present inbipolar operational amplifiers. Electromagnetic Compatibility, IEEE Transactions on, 37.

Abuelma’atti, M.T. and Aiyad, M.K. (1995) Chaos in an autonomous active-R circuit. Circuits and Systems I: Fundamental Theory and Applications, IEEE Transactions on [see also Circuits and Systems I: Regular Papers, IEEE Transactions on], 42.

Abuelma’atti, M.T. and Buhalim, S.S. and Alzaher, H.A. (1995) A novel single-capacitor single-operational-amplifier sinusoidaloscillator. Education, IEEE Transactions on, 38.

Abuelma’atti, M.T. and Khan, M.H. (1995) Low component current-mode universal filter. Electronics Letters, 31.

Afroz, Syed Mohiuddin (1995) Effect of captive riders in intercity mode-choice modeling. Masters thesis, KFUPM.

Afroz, Syed Mohiuddin (1995) Effect of captive riders in intercity mode-choice modeling. Masters thesis, King Fahd University of Petroleum and Minerals.

Ahmed, Habib-ur-Rehman (1995) Characterization and stabilization of Eastern Saudi Marls. Masters thesis, KFUPM.

Ahmed, Habib-ur-Rehman (1995) Characterization and stabilization of Eastern Saudi Marls. Masters thesis, King Fahd University of Petroleum and Minerals.

Ahmed, Muhammad Naweed (1995) Computational study of the flowfield through a cascade of NACA 0012 Airfoils. Masters thesis, King Fahd University of Petroleum and Minerals.

Ahmed, Shakeel (1995) Synthesis, modification and catalytic evaluation of high-silica zeolites. PhD thesis, King Fahd University of Petroleum and Minerals.

Ahmed, Syed Tauseef Nizam (1995) A novel architecture for switched-capacitor FIR filters. Masters thesis, King Fahd University of Petroleum and Minerals.

Ahsan, Mohamed (1995) Architectures for arithmetic operations in Galois Fileds GF(2m). Masters thesis, King Fahd University of Petroleum and Minerals.

Al-Absi, Bassam Ibrahim (1995) Numerical discussion of the time domain inverse scattering problem for wave equation. Masters thesis, King Fahd University of Petroleum and Minerals.

Al-Ali, A.K. and Abuelma’atti, M.T. and Hussain, I. (1995) Microcontroller-based phase-angle measurement and correctiontechnique. Industrial Automation and Control: Emerging Technologies, 1995., International IEEE/IAS conference, 1.

Al-Ali, A.R. and El-AMin, I. and Kassas, M. and Al-Saif, F. (1995) A programmable SCR-based AC voltage regulator. Industrial Automation and Control: Emerging Technologies, 1995., International IEEE/IAS conference, 1.

Al-Amin, I.M. and Duffaa, S.O. and Bawah, A.U. (1995) Optimal Shunt Compensators at Nonsinusoidal Busbars. IEEE Transactions on Power Systems, 10 (2). pp. 716-723.

Al-Asiri, Nasser Hassan (1995) Evaluation of thermal resistivity of soils in Saudi Arabia. Masters thesis, KFUPM.

Al-Asiri, Nasser Hassan (1995) Evaluation of thermal resistivity of soils in Saudi Arabia. Masters thesis, King Fahd University of Petroleum and Minerals.

Al-Bedoor, Bassem Odeh (1995) Dynamic modeling and analysis of axially moving beam with prismatic and revolute joints. PhD thesis, King Fahd University of Petroleum and Minerals.

Al-Farra, Khalid Jawdat Kamel (1995) Timing driven floorplanning. Masters thesis, King Fahd University of Petroleum and Minerals.

Al-Ghafly, Mohammed Ahmed (1995) Delay in the Construction of public utility projects in Saudi Arabia. Masters thesis, King Fahd University of Petroleum and Minerals.

Al-Ghamdi, Muhammad Ali Mubarak (1995) Evaluation of work sampling as an indicator of construction labor productivity. Masters thesis, King Fahd University of Petroleum and Minerals.

Al-Hazmi, Talal Ali (1995) Toward standardization of public building maintenance contracts in Saudi Arabia. Masters thesis, King Fahd University of Petroleum and Minerals.

Al-Jaziri, Abdul Karim Mohammad (1995) Experimental investigation of various physical factors affecting the stability of water-in-oil emulsions in oil production. Masters thesis, King Fahd University of Petroleum and Minerals.

Al-Khamis, Mohammed Najim (1995) Evaluation of correlations for natural gas compressibility factors. Masters thesis, King Fahd University of Petroleum and Minerals.

Al-Mouslli, Nabeel (1995) Design & Implementation of a 3D graphics system an interactive hierarchical modeling approach. Masters thesis, King Fahd University of Petroleum and Minerals.

Al-Nasser, Abdulaziz Jaffar (1995) Enhancement of AC transient stability through multiterminal DC (MTDC) systems. Masters thesis, King Fahd University of Petroleum and Minerals.

Al-Qahtani, Mohhmad Shayea Ali (1995) Forced flow in the entry region of concentric annuli with impulsively rotated inner walls. Masters thesis, King Fahd University of Petroleum and Minerals.

Al-Rasasi, Ibrahim H. (1995) Local properties of some polynomial classes of harmonic mappings. Masters thesis, King Fahd University of Petroleum and Minerals.

Al-Sahli, Khaled A. S. (1995) A neural network approach to feedback linearization. Masters thesis, King Fahd University of Petroleum and Minerals.

Al-Shahrani, Saad Mohammad (1995) Active filters and oscillators using current feedback operational amplifiers. Masters thesis, King Fahd University of Petroleum and Minerals.

Al-Shams, Abdul-Aziz Mohammed (1995) Transient stability assessment using artificial neural networks. Masters thesis, King Fahd University of Petroleum and Minerals.

Al-Sukhni, H. F. and Sait, Sadiq M. and Benten, M. S. (1995) Loop based scheduling for high level synthesis. In: IEEE Phoenix Conference on Computers and Communications, IPCCC.

Al-Sukhni, H.F. and Youssef, H. and Sait, Sadiq M. and Benten, M.S.T. (1995) Loop based scheduling for high level synthesis. Computers and Communications, 1995. Conference Proceedings of the 1995 IEEE Fourteenth Annual International Phoenix conference, 1.

AlHumaigani, Muhammad Abdallah (1995) A Formal VLSI parallel description and design environment. Masters thesis, King Fahd University of Petroleum and Minerals.

Ali, Mohammad F. and Rahman, F and Hamdan, Abdullah (1995) Techno-economics Evaluation of Waste Lube Oil Rerefining. Inter. J. Production Economics, 42. pp. 263-273.

Asad, Mohammed (1995) Computational Modelling of shrinkage in repaired concrete. Masters thesis, KFUPM.

Asad, Mohammed (1995) Computational Modelling of shrinkage in repaired concrete. Masters thesis, King Fahd University of Petroleum and Minerals.

Ashrafuddin, Mohammed (1995) Prediction of shear/peeling failure in plated R/C beams. Masters thesis, King Fahd University of Petroleum and Minerals.

Asif, Mohammed (1995) Assessment, prediction and enhancement of the reliability of extrusion dies. Masters thesis, King Fahd University of Petroleum and Minerals.

B

Baig, Mirza Ghouse (1995) Laboratory evaluation of hedmanite and lime modified asphalt concrete mixes. Masters thesis, KFUPM.

Baig, Mirza Ghouse (1995) Laboratory evaluation of hedmanite and lime modified asphalt concrete mixes. Masters thesis, King Fahd University of Petroleum and Minerals.

Baik, Tambi Mohammad Sharief (1995) Neocognitron: application to the handwritten Hindi numerals. Masters thesis, King Fahd University of Petroleum and Minerals.

Biswas, Mohammad Elias (1995) Optimization of continuous counter current adsorption systems. Masters thesis, King Fahd University of Petroleum and Minerals.

C

Chaudhy, Muhammad Arshad Saeed (1995) Analysis of packed bed biofilm reactor under single and multiple substrate utilization. Masters thesis, King Fahd University of Petroleum and Minerals.

Cheded, L. (1995) On quantization and its impact on the exact recovery of high ordermoments. Acoustics, Speech, and Signal Processing, 1995. ICASSP-95., 1995 International conference, 3.

Cheema, Atif Nazir (1995) Reliability equivalents for AC adequacy evaluation of large power systems. Masters thesis, King Fahd University of Petroleum and Minerals.

civil, civil (1995) Prediction of shear/peeling failure in plated R/C beams. Masters thesis, KFUPM.

D

DasaNova, Astra Agus Pramana (1995) Oxygen Stoichiometry effect on magnetic properties of Yba₂Cu₃O₇_δ superconductor. Masters thesis, King Fahd University of Petroleum and Minerals.

Dawoud, M.M. (1995) NULL STEERING IN SCANNED LINEAR ARRAYS BY ELEMENT POSITON PERTURBATIONS. International Journal of Electronics, 78 (4). pp. 743-757.

E

El-Alfy, E.-S.M. and Enab, Y.M. and El-Konyalay, E.-S.H. (1995) Obstacle avoidance navigator for mobile robots. In: El-Mansoura First Engineering Conference.

El-Alfy, E.-S.M. and Enab, Y.M. and El-Konyalay, E.S.H. (1995) Obstacle avoidance and motion control for mobile robots. In: SPIE, Mobile Robots IX.

El-Amin, I.M. and Duffuaa, S.O. and Bawah, A.U. (1995) Optimal shunt compensators at nonsinusoidal busbars. Power Systems, IEEE Transactions on, 10.

Elleithy, Wael Mohamed Ali (1995) Bond and durability of fusion-bonded epoxy-coated steel bars. Masters thesis, KFUPM.

Elleithy, Wael Mohamed Ali (1995) Bond and durability of fusion-bonded epoxy-coated steel bars. Masters thesis, King Fahd University of Petroleum and Minerals.

Ezzine, J. and Ben-Daya, M. (1995) Singularly perturbed nonlinear ODEs and interior point optimizationalgorithms. American Control Conference, 1995. Proceedings of the, 3.

F

Farag, A. and Al-Baiyat, S. and Cheng, T.C. (1995) Economic load dispatch multiobjective optimization procedures usinglinear programming techniques. Power Systems, IEEE Transactions on, 10.

Farag, A.S. and Al-Baiyat, S.A. and Cheng, T.C. (1995) Economic Load Dispatch Multiobjective Optimization Procedures Using Linear Programming Techniques. IEEE Trans. on Power Systems, 10 (2). pp. 731-738.

Farooqui, Aamir Alam (1995) Design, modeling, and VLSI implementation of a RISC dataflow array processor. Masters thesis, King Fahd University of Petroleum and Minerals.

Fazlur Rahman, Qureshi Abbas Ali Mohammad (1995) Optimization of continuous post-tensioned bridge decks of prescribed lengths. Masters thesis, KFUPM.

H

Hasan, Ayaz (1995) Modeling of groundwater flow system in Wadi Al-Miyah area, Eastern Saudi Arabia. Masters thesis, King Fahd University of Petroleum and Minerals.

Hasan, Muhammad Nayyar (1995) On the synthesis and optimization of MVL functions. Masters thesis, King Fahd University of Petroleum and Minerals.

Hashmi, Amir (1995) Timing driven global routing for standard cell design. Masters thesis, King Fahd University of Petroleum and Minerals.

Hussain, Asiq (1995) Recovery performance and relative permeabilities of composite cores. Masters thesis, King Fahd University of Petroleum and Minerals.

Hussain, Sajid (1995) Runlength limited codes with error correction capabilities. Masters thesis, King Fahd University of Petroleum and Minerals.

J

Jamiiru, Luttamaguzi (1995) One dimensional coupled vibrating systems with control applied at the coupled points. Masters thesis, King Fahd University of Petroleum and Minerals.

K

Khan, Asad Mohammad (1995) Removal of coliphage and bacteria through slow sand filtration. Masters thesis, KFUPM.

Khan, Asad Mohammad (1995) Removal of coliphage and bacteria through slow sand filtration. Masters thesis, King Fahd University of Petroleum and Minerals.

Khan, Mohammad Shebder (1995) Boundary element analysis of nonprismatic beams and plates. Masters thesis, KFUPM.

Khan, Mohammad Shebder (1995) Boundary element analysis of nonprismatic beams and plates. Masters thesis, King Fahd University of Petroleum and Minerals.

Khokhar, Aleem Aman (1995) Effect of heat treatment on the flow induced corrosion of aluminum-SiC(p). Masters thesis, King Fahd University of Petroleum and Minerals.

M

Magaji, Umar Isa (1995) Assessment of hydrogeological parameters from thin-section study of middle cretaceous sandstones. Masters thesis, King Fahd University of Petroleum and Minerals.

Makkawi, Yassir T. (1995) Investigation of heat transfer in a rectangular packed duct with constant heat flux and asymmetrical wall temperatures. Masters thesis, King Fahd University of Petroleum and Minerals.

Manzoor-ul-Haq, (1995) Reliability-based maintenance strategies for heat exchanges subject to fouling. Masters thesis, King Fahd University of Petroleum and Minerals.

Masoud, Ahmad A. and Bayoumi, Mohammed (1995) Using Local Structure for the Reliable Removal of Noise from the Output of the LoG Edge Detector. IEEE Transactions on Systems, Man, & Cybernetics, 25 (2). pp. 328-337.

Masoudi, H.M. and Arnold, J.M. (1995) Modeling second-order nonlinear effects in optical waveguides usinga parallel-processing beam propagation method. Quantum Electronics, IEEE Journal of, 31.

Mohammed, Aliyu Shazali (1995) Elasto-plastic collapse load analysis of single mitred bends. Masters thesis, KFUPM.

Mohammed, Aliyu Shazali (1995) Elasto-plastic collapse load analysis of single mitred bends. Masters thesis, King Fahd University of Petroleum and Minerals.

Mohammed, Niaz (1995) A groundwater velocity and dissolved oxygen on bioremediation of gasoline-contaminated sandy aquifers. PhD thesis, KFUPM.

Mohammed, Niaz (1995) A groundwater velocity and dissolved oxygen on bioremediation of gasoline-contaminated sandy aquifers. PhD thesis, King Fahd University of Petroleum and Minerals.

Mohiuddin, Naseer Ahmed (1995) Use of small diameter cores in evaluation of in-situ concrete strength in Eastern Saudi Arabia. Masters thesis, KFUPM.

Mohiuddin, Naseer Ahmed (1995) Use of small diameter cores in evaluation of in-situ concrete strength in Eastern Saudi Arabia. Masters thesis, King Fahd University of Petroleum and Minerals.

Mokheimer, Esmail Mohamed Ali (1995) Heat transfer in eccentric annuli. PhD thesis, King Fahd University of Petroleum and Minerals.

O

Odogba, Jibril (1995) Application of H∞ optimization techniques in image & signal processing. Masters thesis, King Fahd University of Petroleum and Minerals.

Okasha, Taha Moustafa Hamed (1995) An experimental study of oil recovery from tarmat reservoirs using hot water and solvent flooding. PhD thesis, King Fahd University of Petroleum and Minerals.

R

Ragheb, H. A. and Hassan, E. (1995) " Radiation Characteristics of slots on conducting circular cylinder covered by eccentric Dielectric Cylinder ". IEE Proceedings part H, Microwave Antennas and Propag, 142 (2). pp. 168-172.

Ragheb, H. A. and Hassan, E. (1995) " Radiation Characteristics of slots on conducting circular cylinder covered by eccentric Dielectric Cylinder ". IEE Proceedings part H, Microwave Antennas and Propag, 142 (2). pp. 168-172.

Ragheb, H.A. (1995) Electromagnetic scattering from a coaxial dielectric circularcylinder loading a semicircular gap in a ground plane. Microwave Theory and Techniques, IEEE Transactions on, 43.

Ragheb, H.A. and Hassan, E.E. (1995) Radiation characteristic of slots on conducting circular cylindercovered by eccentric dielectric cylinder. Microwaves, Antennas and Propagation, IEE Proceedings -, 142.

Ragheb, H.A. and Johar, U.M. (1995) Radiation by an axial slot on a dielectric-coated concentricconducting circular cylinder loading a semicircular gap in a groundplane. Antennas and Propagation Society International Symposium, 1995. AP-S. Digest, 1.

Rauf, Asim (1995) Investigation of fatigue crack growth rates under variable amplitude loading. Masters thesis, King Fahd University of Petroleum and Minerals.

S

Sait, Sadiq M. and Benten, M.S.T. and Khan, A.M.T. (1995) Designing ASICs with UAHPL. Circuits and Devices Magazine, IEEE, 11.

Sait, Sadiq M. and Farooqui, A.A. and Beckhoff, G.F. (1995) A novel technique for fast multiplication. Computers and Communications, 1995. Conference Proceedings of the 1995 IEEE Fourteenth Annual International Phoenix conference, 1.

Sait, Sadiq M. and Farooqui, Aamir A. and Beckhoff, G. F. (1995) A Novel Technique for Fast Multiplication. In: IEEE Phoenix Conference on Computers and Communications, IPCCC.

Sait, Sadiq M. and Hasan, W. (1995) Hardware design and VLSI implementation of a byte-wise CRCgenerator chip. Consumer Electronics, IEEE Transactions on, 41.

Sait, Sadiq M. and Youssef, H. and Nassar, K. and Benten, M. S. (1995) Timing Driven Genetic Algorithm for Placement. In: IEEE Phoenix Conference on Computers and Communications, IPCCC.

Sait, Sadiq M. and Youssef, H. and Nassar, K. and Benton, M.S.T. (1995) Timing driven genetic algorithm for standard-cell placement. Computers and Communications, 1995. Conference Proceedings of the 1995 IEEE Fourteenth Annual International Phoenix conference, 1.

Sait, Sadiq M. and Youssef, H. and Tanvir, S. and Benten, M. S. (1995) Timing Influenced Force Directed Floorplanning. In: European Design Automation Conference with Euro-VHDL, Euro-DAC'95, Brighton.

Sait, Sadiq M. and Youssef, H. and Tanvir, S. and Benten, M. S. (1995) Timing Influenced General-Cell Genetic Floorplanner. In: Asia and South-Pacific Design Automation Conference, ASP-DAC'95, Japan.

Saleem-ur-Rahman, (1995) Development of Raney-Ni gas diffusion electrodes for fuel-cells. PhD thesis, King Fahd University of Petroleum and Minerals.

Salman, Shuaib (1995) Impact of process variables on nutrient removal in slow sand filters. Masters thesis, KFUPM.

Salman, Shuaib (1995) Impact of process variables on nutrient removal in slow sand filters. Masters thesis, King Fahd University of Petroleum and Minerals.

Sayani, Mohammed Asif (1995) Associative memory neural networks for error correction of linear block codes. Masters thesis, King Fahd University of Petroleum and Minerals.

Sheikh, S. I. (1995) “Frequency/Bias-field Mode Charts for Gyrotropic Waveguides". Microwave and Optical Technology Letters, 10 (4). pp. 201-204.

Siddique, Ikram-ul-Haq (1995) Calculations of turbulent flow and heat transfer in periodically converging-diverging channels. Masters thesis, King Fahd University of Petroleum and Minerals.

T

Taher, Salah El-Din Mohammed Fahmy (1995) Canonical elastoplastic - damage modelling of reinforced concrete. PhD thesis, KFUPM.

Taher, Salah El-Din Mohammed Fahmy (1995) Canonical elastoplastic - damage modelling of reinforced concrete. PhD thesis, King Fahd University of Petroleum and Minerals.

Tahir, Bassam M. (1995) Concrete repair with silica fume shotcrete. Masters thesis, King Fahd University of Petroleum and Minerals.

Thadpatri, Mohammed Abbas (1995) Maintenance scheduling of power system generating units by tabu search. Masters thesis, King Fahd University of Petroleum and Minerals.

Y

Yahya, C.B. and Guizani, M. (1995) Novel optical gates for data acquisition and processing: opticalwavelength division multiplexer. Instrumentation and Measurement Technology Conference, 1995. IMTC/95. Proceedings. 'Integrating Intelligent Instrumentation and Control'., IEEE, 1.

Youssef, H. and Sait, Sadiq M. and Al-Farra, K.J. (1995) Timing influenced force directed floorplanning. Design Automation Conference, 1995, with EURO-VHDL, Proceedings EURO-DAC '95., European, 1.

Youssef, H. and Sait, Sadiq M. and Nassar, K. and Benten, M. S. (1995) Performance Driven Standard-cell Placement Using the Genetic Algorithm. In: Fifth Great Lakes Symposium on VLSI, GLSVLSI'95, Buffalo, USA.

Youssef, H. and Sait, Sadiq M. and Nassar, K. and Benten, M.S.T. (1995) Performance driven standard-cell placement using the geneticalgorithm. VLSI, 1995. Proceedings., Fifth Great Lakes Symposium on, 1.

This list was generated on Thu Apr 24 14:21:06 2014 AST.