KFUPM ePrints

Browse by Type

Up a level
Export as [feed] RSS 2.0 [feed] RSS 1.0 [feed] Atom
Number of items: 2228.

AL-Khuraish, Fahad Ahmed (2110) DESIGN AND ANALYSIS OF EBG-BASED LOW-PROFILE MICROSTRIP ANTENNAS FOR WIRELESS COMMUNICATIONS. Masters thesis, King Fahd University of Petroleum and Minerals.

Abdo, Muneer Qaid (2013) Experimental Investigation and Modeling the Heat of Hydration in Mass Concrete Structures. PhD thesis, King Fahd University of Petroleum and Minerals.

Hamodi, Mr. Jamil (2013) DEPLOYING TRIPLE-PLAY SERVICES OVER EXISTING IP NETWORKS. Masters thesis, King Fahd University of Petroleum and Minerals.

Naji, Mahboub (2012) Multidimensional Xml File: A New Xml File Structure. Masters thesis, King Fahd University of Petroleum and Minerals.

Al-Asiri, Hassan (2011) Propylene by Oxidative Dehydrogenation of Propane over Mixed Metal Oxide Catalysts. Masters thesis, King Fahd University of Petroleum and Minerals.

Fazal, Atif (2011) Synthesis and Characterization of New Binuclear Cu(I) Diimine and Phosphine Mixed Ligand Complexes: Catalytic Application in the Coupling of Phenylacetylene with Halobenzene. PhD thesis, King Fahd University of Petroleum and Minerals.

Al-Roubaie, Anas A. (2011) INTRUSION DETECTION IN MOBILE AD-HOC NETWORK IMPLEMENTATION AND PERFORMANCE EVALUATION OF ADAPTIVE ACKNOWLEDGMENT APPROACH. Masters thesis, King Fahd University of Petroleum and Minerals.

Al-Khalifa, Hussain A (2011) Field Production Facility Optimization Using Sequential Quadratic Programming. Masters thesis, King Fahd University of Petroleum and Minerals.

KHAN, IRFAN ALI (2011) Design and Evaluation of a Reliable P2P Communication Protocol for IEEE 802.11b Networks. Masters thesis, King Fahd University of Petroleum and Minerals.

SYED, NAEEM FIRDOUS (2011) Anomaly Detection Technique for Honeynet Data Analysis. Masters thesis, King Fahd University of Petroleum and Minerals.

Akram, Muneeb Akram (2011) Process Enhancement Through Integrated Statistical and Automatic Process Control Techniques. Masters thesis, King Fahd University of Petroleum and Minerals.

ALMUBARAK, SAEED (2011) Realtime Rate Allocation for multilaterals wells equipped with downhole valves and a PDHMS. Masters thesis, King Fahd University of Petroleum and Minerals.

Pillai, Sunil Kumar G. (2011) DESIGN OF WAFFLE SLABS USING STRUT-AND-TIE MODEL. Masters thesis, King Fahd University of Petroleum and Minerals.

MOHAMMED ABDUL, KHADIR KHAN ASIF (2011) Tunneling Based Solution to Bypass Internet Access Denial by International Internet Service Providers. Masters thesis, King Fahd University of Petroleum and Minerals.

Al-Asiri, Hassan (2011) Propylene by Oxidative Dehydrogenation of Propane over Mixed Metal Oxide Catalysts. Masters thesis, King Fahd University of Petroleum and Minerals.

Al-Malki, Talal (2011) A model for Cost of Residential Power Outages:A Saudi Arabian Study Case. Masters thesis, King Fahd University of Petroleum and Minerals.

Ali, Zahid (2011) Multiuser TOA Estimation Techniques with Application to Radiolocation. PhD thesis, King Fahd University of Petroleum and Minerals.

Mohammed, Abdul Nasar (2011) The Leaky Least Mean Mixed Norm Algorithm. Masters thesis, King Fahd University of Petroleum and Minerals.

SCARIA, SHAJI (2011) A STUDY OF BEHAVIOUR OF HORIZONTAL KNEE CONNECTIONS. Masters thesis, King Fahd University of Petroleum and Minerals.

BinObaid, Abdulaziz (2011) Duals and Transforms of Ideals in PVMDs Compact and Coprime Packedness With Respect to Star Operations. PhD thesis, King Fahd University of Petroleum and Minerals.

Hayat, Khizar (2011) Laser Induced Photocatalytic Applications of Nanoscale Materials for Degradation of Dyes and Phenol. PhD thesis, King Fahd University of Petroleum and Minerals.

Mir, Shahed Ali (2011) Photovoltaic System Modeling and Analysis. Masters thesis, King Fahd University of Petroleum and Minerals.

Abdulhafez Shabaneh, Islam (2011) PERFORMANCE CHARACTERISTICS OF SOLAR AIR HEATED HDH DESALINATION SYSTEM. Masters thesis, King Fahd University of Petroleum and Minerals.

MOHAMMED, MOHAMMED ALHAJI (2010) Design of a Model University Classroom for Collaborative and Interactive LearningDesign of a Model University Classroom for Collaborative and Interactive Learning. Masters thesis, King Fahd University of Petroleum and Minerals.

KATTAN, HISHAM A. (2010) PERFORMANCE MODELING OF SAUDI ARAMCO ROADS NETWORK. Masters thesis, King Fahd University of Petroleum and Minerals.

Al-Zu'bi, Walid (2010) Process Targeting for Multi-stage Production System: A Network Approach. Masters thesis, King Fahd University of Petroleum and Minerals.

Sultan, Farooq (2010) Custom Design and Implementation of a Wireless Sensor Node, Energy-Efficient MAC and Routing Protocols. Masters thesis, King Fahd University of Petroleum and Minerals.

Khan, Muhammad Jamal (2010) Characterization of Low Density Polyethylene/Oil Fly Ash Composites and Impact of Surface Modification of Fly Ash on composite Properties. Masters thesis, King Fahd University of Petroleum and Minerals.

alsharikh, Abdulaziz (2010) Graphical Processing Unit (GPU) Based 3D Seismic Sobel Edge Detection. Masters thesis, King Fahd University of Petroleum and Minerals.

Jaha, Emad (2010) Color Face Recognition Using Quaternion Principal Component Analysis (Q-PCA). Masters thesis, King Fahd University of Petroleum and Minerals.

Alzahrani, Waleed (2010) Fingerprint Matching using Moments and Moment Invariants. Masters thesis, King Fahd University of Petroleum and Minerals.

ABDULHAMEED, FAHD (2010) DYNAMIC ROUND-ROBIN PEER-TO-PEER (P2P) DOMAIN NAME SYSTEM (DNS). Masters thesis, King Fahd University of Petroleum and Minerals.

Abbasi, Sarfraz / Initials (2010) Rheology & Solid State Properties of Polyethylene/CNT Nanocomposites: Impact of CNT Characteristics and Surface Modification. PhD thesis, King Fahd University of Petroleum and Minerals.

Chowdhury, Mohammad Monirul Islam (2010) Photocatalytic Treatment of Aqueous Phase Pollutants using Modified TiO2. Masters thesis, King Fahd University of Petroleum and Minerals.

Al Roudhan, Abdulkareem Roudhan (2010) Saturation-Height Modelling of Oil and Gas-Capped Reservoirs. Masters thesis, King Fahd University of Petroleum and Minerals.

Al-Omari, Ahmed S. (2010) FINITE ELEMENT MODELING OF RING SPLITTING TEST TO PREDICT RESIDUAL STRESSES IN SPIRAL WELDED PIPE. Masters thesis, King Fahd University of Petroleum and Minerals.

Shaheen, AbdulRhman (2010) A Comparative Analysis of Intelligent Techniques for Detecting Anomalous Internet Traffic. Masters thesis, King Fahd University of Petroleum and Minerals.

Abu-Thabit, Nidal Y. M. (2010) Synthesis of Ionic Polymers for Proton Exchange Membrane Fuel Cells and Viscosity Modifications. PhD thesis, King Fahd University of Petroleum and Minerals.

Al-Moallem, Yousuf (2010) Design Considerations for Wireless Sensor Network for Industrial Automation. Masters thesis, King Fahd University of Petroleum and Minerals.

Fallatah, Wael Sulaiman (2010) A study of Mechanical Properties and Processability of Blown Films Using b-LLDPE and LDPE Blends. Masters thesis, King Fahd University of Petroleum and Minerals.

Asiri, Yahya A (2010) Neural Network Based Detection of Partial Discharge in HV Motors. Masters thesis, King Fahd University of Petroleum and Minerals.

APALARA, TIJANI ABDUL-AZIZ (2010) ASYMPTOTIC BEHAVIOUR OF SOLUTIONS OF SOME VISCOELASTIC PROBLEMS. Masters thesis, King Fahd University of Petroleum and Minerals.

Alzahrani, Hashim (2010) Strategic Bidding For Load Serving Entity in Electricity Markets. Masters thesis, King Fahd University of Petroleum and Minerals.

Mohammed, Hesham (2010) Water Flooding Performance Prediction Using Streamline Simulation. Masters thesis, King Fahd University of Petroleum and Minerals.

Al Wafi, Essam (2010) Transmission Congestion Management. Masters thesis, King Fahd University of Petroleum and Minerals.

Al-Dweik, Ahmad Yousef (2010) Invariant Solutions, Double Reductions and Conservation Laws for Certain Evolution Equations. PhD thesis, King Fahd University of Petroleum and Minerals.

Al-Qadhi, Mohammed Abdullah Ali (2010) A Framework for Integration Specifications for Component-Based Software. Masters thesis, King Fahd University of Petroleum and Minerals.

Al-Kaldi, Ezeldine F.H (2010) LIFE CYCLE COSTING FOR SELECTED STRUCTURAL MATERIALS FOR OFFSHORE PLATFORMS. Masters thesis, King Fahd University of Petroleum and Minerals.

Sujaulhaq Shafiulhaq, Syed Ammar A. Tirmizi (2010) PERFORMANCE ANALYSIS OF CHILLED WATER SYSTEMS AND THE EFFECT OF INCORPORATION OF EJECTOR COOLING SYSTEM. Masters thesis, King Fahd University of Petroleum and Minerals.

Al-Qahtani, Ayed Saad (2010) Fault Tolerance Techniques for Sequential Circuits: a Design Level Approach. Masters thesis, King Fahd University of Petroleum and Minerals.

Dahman, Ala' Ahmad (2010) LOW COMPLEXITY BLIND EQUALIZATION FOR SISO SYSTEMS WITH GENERAL CONSTELLATIONS. Masters thesis, King Fahd University of Petroleum and Minerals.

Hashem, Ali (2010) A COMPREHENSIVE EMPIRICAL VALIDATION OF PACKAGE-LEVEL METRICS FOR OO SYSTEMS. Masters thesis, King Fahd University of Petroleum and Minerals.

Adinoyi, Muhammed Jamiu (2010) Effect of Sonication Time and Clay Loading on Nanoclay Dispersion, Tensile and Hardness Properties of Epoxy-Clay Nanocomposite. Masters thesis, King Fahd University of Petroleum and Minerals.

Al-Moqbel, Abdulaziz M. (2010) An Innovative Model-based Velocity Integration Procedure with an Application in Eastern Saudi Arabia. Masters thesis, King Fahd University of Petroleum and Minerals.

Haladu, Shamsuddeen Abdullahi (2010) Total Synthesis of Bioactive Natural Products. Masters thesis, King Fahd University of Petroleum and Minerals.

Khwaja, Salman Ahmad (2010) Towards Design Patterns Definition Language (DPDL). Masters thesis, King Fahd University of Petroleum and Minerals.

Al-Tholaia, Mohammed (2010) Durability Assessment of Joint Assembly for Fiberglass Resin Coated Concrete Cylinder Pipes. Masters thesis, King Fahd University of Petroleum and Minerals.

Drmosh, Qasem (2010) SYNTHESIS AND CHARACTERIZATION OF NANO- STRUCTURE METAL OXIDES AND PEROXIDES PREPARED BY LASER ABLATION IN LIQUIDS. Masters thesis, King Fahd University of Petroleum and Minerals.

Salihu, Adamu Girei (2010) Effect of Surface Modification of Carbon Nanotubes (CNT) on the Mechanical and Thermal Properties of Polypropylene/CNT Nanocomposites. Masters thesis, King Fahd University of Petroleum and Minerals.

Jaradat, Alaeddin (2010) GAIN SCHEDULED FILTERING DESIGN FOR PARAMETER VARYING SYSTEMS. Masters thesis, King Fahd University of Petroleum and Minerals.

AlFaouri, Y.S. (2010) Design of an LTE Antenna for Mobile Communication. Masters thesis, King Fahd University of Petroleum and Minerals.

Mohammed, Abdul Ghani (2010) PARALLEL INTERFERENCE CANCELLATION IN CDMA BASED ON FUZZY LOGIC USING MATRIX ALGEBRAIC APPROACH. Masters thesis, King Fahd University of Petroleum and Minerals.

GANIYU, ABIDEEN ADEKUNLE (2010) SUBCONTRACTING STRATEGY IN INDUSTRIAL PROJECTS. Masters thesis, King Fahd University of Petroleum and Minerals.

Rafiq, Mohammad Rahil (2010) Routing prediction for probabilistic mobility model using neural networks for ad-hoc networks. Masters thesis, King Fahd University of Petroleum and Minerals.

Farooqi, Mohammed Moinuddin Rizwa (2010) Adapting Tabu Search to Accommodate Online demand variations in a Data Network. Masters thesis, King Fahd University of Petroleum and Minerals.

Rahman, S. M. (2010) APPLICATION OF ARTIFICIAL INTELLIGENCE MODELS IN TRAFFIC FLOW PREDICTION AND TIME-OF-DAY BREAKPOINTS DETERMINATION. PhD thesis, King Fahd University of Petroleum and Minerals.

Mohammed, Abdul Najid (2010) The Impact of HVAC System Operation and Selection on Energy Efficiency in Office Buildings in Hot Climates. Masters thesis, King Fahd University of Petroleum and Minerals.

Al-Muslim, Husain Muhammad (2010) Impact of Combined Mechanical Damage on the Integrity of Pipelines. PhD thesis, King Fahd University of Petroleum and Minerals.

Ruhul, Amin (2010) DEVELOPMENT AND INVESTIGATION OF ENVIRONMENTALLY DEGRADABLE PLASTIC BAGS IN SAUDI ARABIA. PhD thesis, King Fahd University of Petroleum and Minerals.

AL-FIFI, SALMAN (2010) EXPERIMENTAL AND NUMERICAL STUDY OF OPEN-AIR ACTIVE COOLING. Masters thesis, King Fahd University of Petroleum and Minerals.

Moosa, Basem (2010) asymmetric induction in 1,3-dipolar cycloaddition using chiral nitrones. PhD thesis, King Fahd University of Petroleum and Minerals.

Al-Jamimi, Hamdi Ali (2010) CLASSIFICATION OF REFACTORING METHODS FOR ASPECT ORIENTED PROGRAMMING BASED ON SOFTWARE QUALITY ATTRIBUTES. Masters thesis, King Fahd University of Petroleum and Minerals.

Abu-Eideh, M.M. (2010) Effect of Electrodes Material on the Degradation of p-Cresol in Electrochemical Process. Masters thesis, King Fahd University of Petroleum and Minerals.

Al-Rubaee, Radwan (2010) On a Generalized Fisher Equation. Masters thesis, King Fahd University of Petroleum and Minerals.

Odedairo, Taiwo/T.A. (2010) ETHYLATION OF BENZENE OVER DIFFERENT ZEOLITE CATALYSTS. Masters thesis, King Fahd University of Petroleum and Minerals.

Alam, M. Ahsanul (2010) IMPACT OF WIND GENERATOR INFEED ON DYNAMIC PERFORMANCE OF A POWER SYSTEM. PhD thesis, King Fahd University of Petroleum and Minerals.

Siddiqui, Bilal (2010) "Reconfigurable Flight Control of a Fighter Aircraft, with Wind Tunnel Study" by Bilal A. Siddiqui, April 2010. Masters thesis, King Fahd University of Petroleum and Minerals.

AL-SUWAIYEL, MOHAMMED A. (2010) WATER WAVE PROPAGATION ON NONUNIFORM BOTTOM. Masters thesis, King Fahd University of Petroleum and Minerals.

LAJAMI, ABDULLAH (2010) synthesis of polyisoxazolidines as potential corrosion inhibitors. Masters thesis, King Fahd University of Petroleum and Minerals.

Al-Awami, Hussain (2010) ILLUSTRATION OF DISTRIBUTED GENERATION EFFECTS ON PROTECTION SYSTEM COORDINATION. Masters thesis, King Fahd University of Petroleum and Minerals.

AL-ANAZI, KHALID Q. (2010) LARGE EDDY SIMULATION OF THE FLOW AROUND BLUFF BODY WITH DRAG REDUCTION DEVICE. Masters thesis, King Fahd University of Petroleum and Minerals.

Suleiman, Rami (2010) PALLADIUM-CATALYZED ALKOXYCARBONYLATION AND AMINOCARBONYLATION OF TERMINAL ALKYNES: SYNTHESIS AND APPLICATIONS OF alpha,beta-UNSATURATED ESTERS AND AMIDES. COMPUTATIONAL STUDY OF THE REACTION MECHANISM. PhD thesis, King Fahd University of Petroleum and Minerals.

Muhammad, Sabih (2010) DETECTION AND COMPENSATION OF VALVE STICTION IN CONTROL LOOPS. Masters thesis, King Fahd University of Petroleum and Minerals.

Al Sharif, Sharif M. S. (2010) An Improved Active Contour Model for Medical Images Segmentation. Masters thesis, King Fahd University of Petroleum and Minerals.

Ibrahim, Bushra (2010) Effect of Co32-, Hco3-, and So42- On the Degradation of Phenol in Electrochemical Oxidation Process. Masters thesis, King Fahd University of Petroleum and Minerals.

Mendahawi, Nayef (2010) Handoff Performance for Voice over IP in WiMAX Networks. Masters thesis, King Fahd University of Petroleum and Minerals.

Zaro, Fouad (2010) MULTI-OBJECTIVE OPTIMAL POWER FLOW IN DEREGULATED ENVIRONMENT. Masters thesis, King Fahd University of Petroleum and Minerals.

MELHEM, OMAR A. (2010) THREE-DIMENSIONAL SIMULATION OF LASER GAS-ASSISTED CUTTING: JET IMPINGEMENT CONSIDERATIONS. PhD thesis, King Fahd University of Petroleum and Minerals.

Salim, Ahmad (2010) PERFORMANCE OF LAYERED STEERED SPACE-TIME CODES IN WIRELESS SYSTEMS. Masters thesis, King Fahd University of Petroleum and Minerals.

Al-Bakr, Nawaf I (2010) Kinetics Study of Different Corrosion Inhibitors for 1018 Carbon Steel in Seawater. Masters thesis, King Fahd University of Petroleum and Minerals.

Mohammed, Mumtaz Ahmed Khan (2010) NUMERICAL INVESTIGATION OF MECHANISMS TO AID IN ENHANCING SURFACE HEAT TRANSFER FROM AND IMPINGING 2D HOT-AIR JET. Masters thesis, King Fahd University of Petroleum and Minerals.

Mu'azu, Nuhu (2010) Electrochemical Oxidation of Phenol in Simulated Petrochemical Wastewaters Using Boron-Doped Diamond Electrodes: Investigation of Effect of NH4+, CN- and S2- Presence. PhD thesis, King Fahd University of Petroleum and Minerals.

Al-Sulami, Sulaiman Lafi (2010) Characterization of the Hercynian Unconformity in Central and Eastern Saudi Arabia. Masters thesis, King Fahd University of Petroleum and Minerals.

Shareef, Mohammed Nadeemullah (2010) Detection and Diagnosis of Plant-wide Oscillations. Masters thesis, King Fahd University of Petroleum and Minerals.

Hussein, Ahmad (2010) SECURING BIOMETRIC DATA. Masters thesis, King Fahd University of Petroleum and Minerals.

Lawal, Isah Abdullahi (2010) Recognition of Handwritten Arabic (Indian)Digits Using Abductive Network. Masters thesis, King Fahd University of Petroleum and Minerals.

Al-Minshawy, Basim Jamil (2010) HEAT CONDUCTION FROM TWO SPHERES. Masters thesis, King Fahd University of Petroleum and Minerals.

Ali, Mohammed Ahsan (2010) FUZZY BASED SIC MULTIUSER DETECTORS FOR WIRELESS CHANNELS. Masters thesis, King Fahd University of Petroleum and Minerals.

Al-Afari, Khalid (2010) An Efficient Coverage Scheme to Maximize Life-Time in Wireless Sensor. Masters thesis, King Fahd University of Petroleum and Minerals.

Al-Mojel, Abdullah (2010) High-Resolution Sequence Stratigraphy of the Middle Jurasic Lower Fadhili Reservoir in Khurais. Masters thesis, King Fahd University of Petroleum and Minerals.

Alsharaa, Abdulnaser (2010) Electrochemical Investigation and Analytical Determination of Nucleic Acid Constituents at Different Carbon Composite Electrode Surfaces. Masters thesis, King Fahd University of Petroleum and Minerals.

Khattak, Obaid ur Rehman (2009) The Leaky Least Mean Fourth Algorithm. Masters thesis, King Fahd University of Petroleum and Minerals.

Alrefai, Ahmad Salam (2009) BGP based Solution for International ISP Blocking. Masters thesis, King Fahd University of Petroleum and Minerals.

Ghaith, Fadi (2009) Dynamic Modeling of Rotating Flexible Pipe Conveying Fluid and Subjected to External Axial Flow. PhD thesis, King Fahd University of Petroleum and Minerals.

Faiz, Mohammed Mujahid Ulla (2009) The Signed Regressor Least Mean Fourth (SRLMF) Adaptive Algorithm. Masters thesis, King Fahd University of Petroleum and Minerals.

Al-Khalifa, Mohammed (2009) Application of Neural Network for Two Phase Flow Through Chokes. Masters thesis, King Fahd University of Petroleum and Minerals.

Syed, Hussain (2009) Modeling, Analysis and Optimization of the Thermal Performance of Air Conditioners. Masters thesis, King Fahd University of Petroleum and Minerals.

Khan, Farhan (2009) Transistor-Level Defect-Tolerant Techniques for Reliable Design at the Nanoscale. Masters thesis, King Fahd University of Petroleum and Minerals.

Mansur, Sheharyar (2009) Effects of Geometry and Anisotropy on Permeability Measurements from Drill Cuttings. Masters thesis, King Fahd University of Petroleum and Minerals.

AL-KHDOUR, TAYSEER (2009) A STUDY ON CROSS LAYER OPTIMIZATION FOR APPLICATION SPECIFIC WIRELESS SENSOR NETWORKS. PhD thesis, King Fahd University of Petroleum and Minerals.

Dafalla, Hatim (2009) SEQUENTIAL INJECTION ANALYSIS (SIA) TECHNIQUE FOR THE ASSAY OF KETOCONAZOLE AND DICLOFENAC SODIUM IN DRUG FORMULATIONS WITH CHEMOMETRIC APPROACH. Masters thesis, King Fahd University of Petroleum and Minerals.

Khalifa, Atia (2009) EXPERIMENTAL AND NUMERICAL INVESTIGATION OF FLOW INDUCED VIBRATION IN A HIGH PRESSURE DOUBLE VOLUTE CENTRIFUGAL PUMP. PhD thesis, King Fahd University of Petroleum and Minerals.

AlDurgam, Mohammad (2009) Extensions and Characterization of Optimal Maintenance Policies for Multistate Partially Observed Markovian Systems. PhD thesis, King Fahd University of Petroleum and Minerals.

Al-Khaldi, Salman Faleh (2009) REMOVAL OF ARSENIC AND MERCURY FROM WATER USING MULTI-WALLED CARBON NANOTUBES. Masters thesis, King Fahd University of Petroleum and Minerals.

BAKATHER, OMER YAHYA (2009) REMOVAL OF LEAD & CHROMIUM FROM WATER BY USING MODIFIED & NONMODIFIED CARBON NANOTUBES. Masters thesis, King Fahd University of Petroleum and Minerals.

Al-Sharif, Yousef Fawaz (2009) MICROWAVE FILTER DESIGN BY USING CONTINUOUSLY VARYING TRANSMISSION LINE (CVTL). Masters thesis, King Fahd University of Petroleum and Minerals.

Khalid, Haris M. (2009) Fault Diagnosis Using a Sequential Integration of Model-Free and Model-Based Approaches. Masters thesis, King Fahd University of Petroleum and Minerals.

Balhareth, Hadi M. (2009) Fracture Detection Using Azimuthal P-wave Amplitude Variation with Offset (AVOA) in a Carbonate Reservoir, Khurais Field, Saudi Arabia. Masters thesis, King Fahd University of Petroleum and Minerals.

Mansoor, Umair (2009) Quasi-Newton Least Mean Fourth Adaptive Algorithm. Masters thesis, King Fahd University of Petroleum and Minerals.

Aljamaan, Hamoud (2009) Software Quality Assessment using Ensemble Models. Masters thesis, King Fahd University of Petroleum and Minerals.

Al-Mana, Abdulrahman M. (2009) On Linux Performance of CPU-Bound Processes in the Presence of Network I/O. Masters thesis, King Fahd University of Petroleum and Minerals.

Khan, Babar H. (2009) APPLICATION OF RANDOM MATRIX THEORY TO WIRELESS BROADCAST PROBLEMS AND SEISMIC SIGNAL PROCESSING. Masters thesis, King Fahd University of Petroleum and Minerals.

Abdullah, Gamil (2009) Stabilization of Eastern Saudi Soils Using Heavy Fuel Oil Fly Ash and Cement Kiln Dust. Masters thesis, King Fahd University of Petroleum and Minerals.

Al-Osta, Mohammed (2009) OPTIMIZATION OF CONTINUOUS POST-TENSIONED CONCRETE BRIDGE GIRDERS WITH VARIABLE DEPTH. Masters thesis, King Fahd University of Petroleum and Minerals.

Al-Akeel, Adel (2009) OPTIMIZING BACKOFF PROCEDURE FOR ENHANCED THROUGHPUT AND FAIRNESS IN WIRELESS LANs. Masters thesis, King Fahd University of Petroleum and Minerals.

Bamuqabel, Ahmed (2009) Power System Stability Enhancement Using Multi-Band Power System Stabilizers. Masters thesis, King Fahd University of Petroleum and Minerals.

Balfaqih, Hassan A. (2009) A Methodology for Identifying Learning Activity Settings and User Needs In Educational Facilities. Masters thesis, King Fahd University of Petroleum and Minerals.

Banaeamah, Faisal Mohammed (2009) New Approaches for Refactoring to Frameworks. Masters thesis, King Fahd University of Petroleum and Minerals.

Alamutu, Lateef Olawale (2009) STABILIZATION/SOLIDIFICATION OF SOIL CONTAMINATED WITH HAZARDOUS WASTES. Masters thesis, King Fahd University of Petroleum and Minerals.

Al-Hashim, Amin Ghalib S. (2009) Arabic Database for Automatic Printed Arabic Text Recognition Research and Benchmarking. Masters thesis, King Fahd University of Petroleum and Minerals.

Sitouah, Mohamed (2009) Estimation of Reservoir Properties from Seismic Attributes and Well Log Data using Artificial Intelligence. Masters thesis, King Fahd University of Petroleum and Minerals.

Yousuf, Muhammad Salman (2009) Nonlinear Predictive Control Using Particle Swarm Optimization: Applications to Power Systems. Masters thesis, King Fahd University of Petroleum and Minerals.

Ali, Saeed (2009) STUDY OF INTERACTION BETWEEN VISCOELASTIC AND FRICTIONAL DAMPINGS IN WAVE EQUATIONS. Masters thesis, King Fahd University of Petroleum and Minerals.

Bahjat, Ahmed (2009) Information Fusion in Multibiometric Systems. Masters thesis, King Fahd University of Petroleum and Minerals.

Syed, Asad (2009) Variable Step-Size Least-Mean Fourth Algorithm of the Quotient Form. Masters thesis, King Fahd University of Petroleum and Minerals.

Al-Lehyani, Ayman Fazea (2009) DATA DRIVEN MAPPING AND ATTENUATION OF NEAR-SURFACE DIFFRACTORS. Masters thesis, King Fahd University of Petroleum and Minerals.

AL-GATHE, ABDELRIGEEB (2009) ANALYSIS OF ARCHIE’S PARAMETERS DETERMINATION TECHNIQUES. Masters thesis, King Fahd University of Petroleum and Minerals.

Zubair, Abdulrazaq (2009) Fate of Bromate Formation in Water Treated by ozone-based Advanced Oxidation Processes. Masters thesis, King Fahd University of Petroleum and Minerals.

Jarrar, Mohammad (2009) Tilting and star module theory in commutative rings. PhD thesis, King Fahd University of Petroleum and Minerals.

Oloso, Munirudeen A. (2009) PREDICTION OF CRUDE OIL PVT PROPERTIES BY SOFT COMPUTING TECHNIQUES. Masters thesis, King Fahd University of Petroleum and Minerals.

Al-Gathe, Abdelrigeeb Ali (2009) ANALYSIS OF ARCHIE’S PARAMETERS DETERMINATION TECHNIQUES. Masters thesis, King Fahd University of Petroleum and Minerals.

BAJAALAH, KHALED SAEED (2009) DETERMINATION OF MATRIX AND FRACTURE PERMEABILITIES IN WHOLE CORES USING PRESSURE PULSE DECAY. Masters thesis, King Fahd University of Petroleum and Minerals.

AL-GHAZWI, MOHAMMED A. (2009) EVALUATION OF DAMPING CONTROL OF A UNIFIED POWER FLOW CONTROLLER. Masters thesis, King Fahd University of Petroleum and Minerals.

AL-Khiaty, Mojeeb AL-Rhman (2009) Software Evolution Metrics for Object-Oriented Software Changeability Prediction. Masters thesis, King Fahd University of Petroleum and Minerals.

Arabasy, Hosam (2009) LMI-BASED CONTROL OF NONLINEAR TIME-DELAY MODEL FOR “TYPE 1-DIABETIC PATIENT”. Masters thesis, King Fahd University of Petroleum and Minerals.

ALBENSAAD, ABDULLAH M. (2009) Impacts of Distributed Generation on the Stability of Electrical Power Systems. Masters thesis, King Fahd University of Petroleum and Minerals.

Alutaibi, Khaled Shuraem (2009) CRITICAL INFRASTRUCTURE PROTECTION IN SAUDI ARABIA: A CASE STUDY ON PETROCHEMICAL INDUSTRY PROTECTION AGAINST TERRORIST ATTACKS AT JUBAIL INDUSTRIAL CITY (JIC). Masters thesis, King Fahd University of Petroleum and Minerals.

Alkahldi, Fawwaz (2009) Controls on Hierarchy of Miocene Buildups within a High Resolution Cycle Stratigraphic Framework of Dam Formation, Lidam Area, Saudi Arabia. Masters thesis, King Fahd University of Petroleum and Minerals.

Mahrous, Elaf N. (2009) A Continuum Model for Elastic Waves in Embedded Carbon Nanotube Composites. Masters thesis, King Fahd University of Petroleum and Minerals.

Elshafei, Abdul-Rahman (2009) Hardware Online Multiplication-Division: A Design and Performance Study. Masters thesis, King Fahd University of Petroleum and Minerals.

ALALI, Ahmed /Z. (2009) LWD POROSITY PREDICTION FOR WELL PLACEMENT USING NEURAL NETWORK. Masters thesis, King Fahd University of Petroleum and Minerals.

Al-Mudhei, Ali A (2009) Factors Affecting the Implementation of the Saudi Building Code. Masters thesis, King Fahd University of Petroleum and Minerals.

AlGhazi, Anas (2009) Finance-Based Scheduling of Activity Networks. Masters thesis, King Fahd University of Petroleum and Minerals.

Moinuddin, Abdurrahman (2009) THERMAL ANALYSIS AND OPTIMIZATION OF ANNULAR FINS WITH SIMULTANEOUS HEAT AND MASS TRANSFER. Masters thesis, King Fahd University of Petroleum and Minerals.

Al-Dossary, Rashid / M. A. (2009) The Effect of Magnetic Field on Combustion and Emissions. Masters thesis, King Fahd University of Petroleum and Minerals.

Yusuf, Moruf Olalekan (2009) Towards Optimal Design of Reinforced Concrete Structures for Corrosive Environments in Saudi Arabia. Masters thesis, King Fahd University of Petroleum and Minerals.

ALHINDI, ISMAIL (2009) PARAMETRIC STUDY OF SHORT PERIODIC SPEED CONTROL HUMPS ON A ROAD VEHICLE DYNAMIC. Masters thesis, King Fahd University of Petroleum and Minerals.

Al-Nehmi, Ahmed (2009) Decision Factors for Outsourcing the Maintenance Services of Saudi Universities. Masters thesis, King Fahd University of Petroleum and Minerals.

Sarfaraz, Ahmed Furquan (2009) EFFECT OF BLEND RATIO OF h-LLDPE WITH LDPE ON THE PROCESSABLITY AND THE MECHANICAL PROPERTIES OF BLOWN FILMS. Masters thesis, King Fahd University of Petroleum and Minerals.

ARAFEH, M. KHALED (2009) Synthesis of Lamellarins and Related natural products. Masters thesis, King Fahd University of Petroleum and Minerals.

Khan, Masihullah.J (2009) Dynamic Monte Carlo Simulation of Atom Transfer Radical Copolymerization. Masters thesis, King Fahd University of Petroleum and Minerals.

Chandrmohan, Aravind (Abdurrahmaan) (2009) EFFECT OF BASE CAVITIES ON THE DRAG AND WAKE OF A TWO-DIMENSIONAL BLUFF BODY. Masters thesis, King Fahd University of Petroleum and Minerals.

Alkhalid, Abdulaziz (2009) SOFTWARE REFACTORING USING PATTERN RECOGNITION TECHNIQUES. Masters thesis, King Fahd University of Petroleum and Minerals.

AL-OTAIBI, DHAWI ABDULRAHMAN (2009) Experimental Comparison of Calcium Sulfate (CaSO4) Scale Deposition on Coated Carbon Steel and Titanium Surfaces. Masters thesis, King Fahd University of Petroleum and Minerals.

Al Maythalony, B (2009) SYNTHESIS OF NEW GOLD(III) COMPLEXES WITH ALKYLDIAMINE AND CYANIDE LIGANDS AND THEIR INTERACTION WITH SOME BIOLOGICALLY IMPORTANT LIGANDS. PhD thesis, King Fahd University of Petroleum and Minerals.

Al-Zahrani, Ibrahim IMZ (2009) Model System Desulfurization by Using Liquid-Liquid Extraction and Adsorption Techniques. Masters thesis, King Fahd University of Petroleum and Minerals.

ABDO, MUNEER KAID SAID (2009) EXPERIMENTAL INVESTIGATION AND MODELING OF PRESTRESSED PRECAST HOLLOW-CORE SLABS WITH A STRUT-AND-TIE MODEL. Masters thesis, King Fahd University of Petroleum and Minerals.

Anifowose, Fatai Adesina (2009) A Novel Hybrid Computational Intelligence Model for the Characterization of Oil and Gas Reservoirs. Masters thesis, King Fahd University of Petroleum and Minerals.

Rasheed, Zeehasham (2009) ADAPTIVE FUZZY LOGIC BASED FRAMEWORK FOR HANDLING IMPRECISION AND UNCERTAINTY IN PATTERN CLASSIFICATION OF BIOINFORMATICS DATASETS. Masters thesis, King Fahd University of Petroleum and Minerals.

Abdellatif, Mohammad M. (2009) Performance of Multi-hop Ad-hoc Networks in Wireless Environments. Masters thesis, King Fahd University of Petroleum and Minerals.

Al-Mesfer, Abdullah Ali (2009) EFFECT OF FLUID HYDRODYNAMICS ON CALCIUM SULFATE "CASO4" DEPOSITION ON ALUMINUM METAL SURFACE. Masters thesis, King Fahd University of Petroleum and Minerals.

Adeniran, A. A. (2009) Artificial Intelligence Techniques in Reservoir Characterization. Masters thesis, King Fahd University of Petroleum and Minerals.

Al-Zouri, Ali (2009) EMPIRICAL VALIDATION OF CLASS COUPLING METRICS AS CHANGEABILITY INDICATORS IN SOFTWARE EVOLUTION. Masters thesis, King Fahd University of Petroleum and Minerals.

Khan, Hamood ur Rehman (2009) DLL Code Tracking of CDMA Signals under Fading and Multiple Access Interference. Masters thesis, King Fahd University of Petroleum and Minerals.

Elrayyah, Ali (2009) ROBUST STABILITY AND FEEDBACKSTABILIZATION CRITERIA FOR SYSTEMSWITH TIME-VARYING DELAYS. Masters thesis, King Fahd University of Petroleum and Minerals.

Mirza, Murtuza Ali Baig (2009) FRICTION AND WEAR OF 20% VOLUME FRACTION SUBMICRON Al2O3/6061 ALUMINUM ALLOY COMPOSITE FOR BRAKE SYSTEM APPLICATION. Masters thesis, King Fahd University of Petroleum and Minerals.

Al-Qunaieer, Fares S (2009) COLOR IRIS RECOGNITION AND MATCHING USING QUATERNION GABOR WAVELETS. Masters thesis, King Fahd University of Petroleum and Minerals.

Alaswad, Abdulaziz (2009) Energy-Efficient Coatings Based On Wo3-Metal Multilayers. Masters thesis, King Fahd University of Petroleum and Minerals.

Akhtar, Syed Sohail (2009) Analysis and Modeling of Hot Extrusion Die for its Service Life Enhancement. PhD thesis, King Fahd University of Petroleum and Minerals.

Al-Nasser, Mustafa /A (2008) Automated Insulin Delivery to Diabetic Patients. Masters thesis, King Fahd University of Petroleum and Minerals.

Al-Shareef, Khaled (2008) Single Machine Scheduling with Uncertain Processing Times. Masters thesis, King Fahd University of Petroleum and Minerals.

Sohail, Muhammad Saqib (2008) ADAPTIVE ALGORITHMS FOR CHANNEL ESTIMATION: USING A PRIORI INFORMATION FOR OPTIMUM DESIGN. Masters thesis, King Fahd University of Petroleum and Minerals.

Rizvi, Syed Zeeshan (2008) A New Method for Identification of MIMO Hammerstein Model. Masters thesis, King Fahd University of Petroleum and Minerals.

Al-Ashwal, Nagib (2008) ENERGY-EFFICIENT WINDOW DESIGN THROUGH THE INTEGRATION OF DAYLIGHTING AND ARTIFICIAL LIGHTING IN OFFICE BUILDINGS. Masters thesis, King Fahd University of Petroleum and Minerals.

Elish, Karim (2008) Classification of Refactoring Methods Based on Software Quality Attributes. Masters thesis, King Fahd University of Petroleum and Minerals.

AD'DOHAN, BADR (2008) Design and Performance of Interconnect-Efficient LDPC Codes with FPGA Implementation. Masters thesis, King Fahd University of Petroleum and Minerals.

Eltayeb, Mohammed (2008) Opportunistic Scheduling with Limited Feedback in Wireless Communications Systems. Masters thesis, King Fahd University of Petroleum and Minerals.

s, a (2008) z. Masters thesis, c.

Hussain, ahmed (2008) Research statement. PhD thesis, KFUPM.

Al-Telmisani,, Essam Abed (2008) A speaker verification system for Arabic. Masters thesis, KingFahd UNiversity of Petroleum and Minerals.

SHAABAN, YASSER ELSAYED (2008) Software Metrics Definition Language. Masters thesis, King Fahd University of Petroleum and Minerals.

Shaik, Muzibur Rehman (2007) A Stochastic Approach To Solving The Weight Setting Problem in OSPF Networks. Masters thesis, KFUPM.

Siddiqi, Umair F. (2007) Parallel Algorithms for Look-Up Table (LUT) Inverse Halftoning. Masters thesis, King Fahd University of Petroleum & Minerals, Dhahran.

Zaidi, Ali Mustafa (2007) A Modular Reconfigurable Architecture for Asymmetric and Symmetric-key Cryptographic Algorithms. Masters thesis, King Fahd University of Petroleum and Minerals.

a, a (2007) a. Masters thesis, a.

Abu Olba, Maen Abdellatif (2007) Evaluating adequacy of traffic optimization models under local traffic conditions. Masters thesis, KFUPM.

Azhar, Mohammed (2007) Evaluation of ternary cements for improving concrete durability. Masters thesis, KFUPM.

Nassani, Dia Eddin (2007) Effect of curing methods on properties of plain and blended cement concretes. Masters thesis, KFUPM.

Zeedan, Hesham Mahmoud Salama (2007) Optimum design of mat foundation. Masters thesis, KFUPM.

Jafri, S.S. (2007) Computerized adaptive testing using neural networks. Masters thesis, King Fahd University of Petroleum and Minerals.

Mujahid, S.N. (2007) Multi-objective traffic engineering optimization over the Internet. Masters thesis, King Fahd University of Petroleum and Minerals.

Abdulwahab, Mohammad Fouad (2006) Evaluation of consultant performance. Masters thesis, King Fahd University of Petroleum and Minerals.

Adebowale, Awotunde Abeeb (2006) Interference testing using horizontal wells in anisotropic reservoirs. Masters thesis, King Fahd University of Petroleum and Minerals.

Al Bin Mousa, Jafar Husain (2006) Experimental and numerical analyses of mixed mode crack initiation angle. Masters thesis, King Fahd University of Petroleum and Minerals.

Al-Awami, Louai Adnan (2006) A framework for a reliable and fault-tolerant network management architecture. Masters thesis, King Fahd University of Petroleum and Minerals.

Al-Zamil, Khalid Saud (2006) On the optimum communication cost problem in interconnection network. Masters thesis, King Fahd University of Petroleum and Minerals.

Al-Enezi, Saleh Ben Sfoog Ben Marzoog (2006) Comparison of recent and miocene foraminifera from Eastern Saudi Arabia. Masters thesis, King Fahd University of Petroleum and Minerals.

Al-Ghamdi, Musead Salem (2006) Studies on catalysts for preferential oxidation of CO in H2-Rich gas mixture. Masters thesis, King Fahd University of Petroleum and Minerals.

Al Bin Mousa, Jafar Husain (2006) Experimental and numerical analyses of mixed mode crack initiation angle. Masters thesis, King Fahd University of Petroleum and Minerals.

Al-Awami, Louai Adnan (2006) A framework for a reliable and fault-tolerant network management architecture. Masters thesis, King Fahd University of Petroleum and Minerals.

Khan, Khawar (2006) Parallelization of Stochastic Evolution. Masters thesis, King Fahd University of Petroleun and Minerals.

Al-Somani, Turki Faisal (2006) Design and analysis of efficient and secure elliptic curve cryptoprocessors. PhD thesis, Advisor: Dr. Alaaeldin A. Amin, Co-Advisor: Prof. Sadiq Sait Mohammed and Dr. Mohammad H. Al-Suwaiyel. KFUPM.

Adamu, Zulfikar Aliyu (2006) Contaminant behavior and distribution in mechanically ventilated multi-zone building. Masters thesis, King Fahd University of Petroleum and Minerals.

Ahmed, Suraj-deen Iliyas (2006) Emission monitoring systems using Artificial Neural Networks. Masters thesis, KingFahd UNiversity of Petroleum and Minerals.

Almashari, Meshal Abdulaziz (2006) An analytical simulator for deploying IP telephony. Masters thesis, King Fahd University of Petroleum and Minerals.

Aridi, Toufic Nabil (2006) Growth of uniform layers of nanosized zeolites on 3D ordered macroporous carbon: synthesis, characterization, and catalytic evaluation. Masters thesis, King Fahd University of Petroleum and Minerals.

Al-Khalifa, Salah Hussain (2006) Playout scheduling technique based on normalized least mean square (NLMS) algorithm. Masters thesis, King Fahd University of Petroleum and Minerals.

Al-Saadi, Saleh Nasser (2006) Envelope design for thermal comfort and reduced energy consumption in residential buildings. Masters thesis, King Fahd University of Petroleum and Minerals.

Al-Shammari, Salam Khalifah (2006) Strength and durability characteristics of aluminum joints bonded by rubber-modified and aluminum filled epoxy adhesive. Masters thesis, King Fahd University of Petroleum and Minerals.

Al-Somani, Turki Faisal (2006) Design and analysis of efficient and secure elliptic curve cryptoprocessors. PhD thesis, King Fahd University of Petroleum and Minerals.

Shafeeq, Mohammed (2006) Effect of environment on the fatigue and the tensile properties of glass fiber reinforced vinyl ester and epoxy thermosets. Masters thesis, King Fahd University of Petroleum and Minerals.

Tijan, Jimoh (2006) Catalytic hydroformylation of alkenes and polyalkenes: a novel approaches to catalyst synthesis, characterization and recycling. PhD thesis, King Fahd University of Petroleum and Minerals.

Zaheer, Shaikh Faisal (2006) Improved rate-compatible low-density parity-check codes with applications to wireless channels. Masters thesis, King Fahd University of Petroleum and Minerals.

Al-Gahtani, Theeb Ayedh (2006) Dynamic projective coordinate system for elliptic curve crytography. PhD thesis, King Fahd University of Petroleum and Minerals.

Domlo, Abdul-Aziz Mustafa (2006) Fixed point results of some nonlinear maps with applications. PhD thesis, King Fahd University of Petroleum and Minerals.

Aridi, Toufic Nabil (2006) Growth of uniform layers of nanosized zeolites on 3D ordered macroporous carbon: synthesis, characterization, and catalytic evaluation. Masters thesis, King Fahd University of Petroleum and Minerals.

Bello, Mukhtar (2006) Methanol permeation through proton exchange membranes of direct methanol fuel cells. Masters thesis, King Fahd University of Petroleum and Minerals.

Azam, Muhammad Imran (2006) Impact of variability of Nakagami-m parameter on the performance of digital communication systems. Masters thesis, King Fahd University of Petroleum and Minerals.

Azam, Muhammad Imran (2006) Impact of variability of Nakagami-m parameter on the performance of digital communication systems. Masters thesis, King Fahd University of Petroleum and Minerals.

Legemah, Magnus U. (2006) Sequential injection analysis technique for industrial water quality control. Masters thesis, King Fahd University of Petroleum and Minerals.

Shareef, Mohammed Yousuf (2006) Power based scheduling algorithms for WCDMA networks. Masters thesis, King Fahd University of Petroleum and Minerals.

Baig, Mohammed Mirza Amer (2006) Optimization of ideal reactive distillation column using hybrid PSO algorithm. Masters thesis, King Fahd University of Petroleum and Minerals.

Al-Nazer, Ahmed Ali (2006) Collaborative autonomous interface agent for personalized web search. Masters thesis, King Fahd University of Petroleum and Minerals.

Iman, Muhammad Zaki (2006) Internally hydrogen-bonded chiral methylenenitrones in cycloaddition reactions. Masters thesis, King Fahd University of Petroleum and Minerals.

Muzaffar, Syed Zeeshan (2006) Adaptive fuzzy logic based framework for handling imprecision and uncertainty in software development effort prediction models. Masters thesis, King Fahd University of Petroleum and Minerals.

Baig, Mohammed Mirza Amer (2006) Optimization of ideal reactive distillation column using hybrid PSO algorithm. Masters thesis, King Fahd University of Petroleum and Minerals.

CIVIL, civil (2006) Treatment of simulated dairy wastewater by electrocoagulation. Masters thesis, KFUPM.

Mohiuddin, Jaffer (2006) Flexural behavior of prestressed precast hollow core slabs strengthened with CFRP sheets. Masters thesis, KFUPM.

Raza, Asif (2006) Moisture transport and shrinkage in new generation concretes. Masters thesis, KFUPM.

civil, civil (2006) Treatment of petroleum refinery wastewater using TiO2-Mediated photocatalysis. Masters thesis, KFUPM.

civil, civil (2006) Treatment of simulated petrochemical wastewater by means of continuous electrocoagulation-ultrafiltration process. Masters thesis, KFUPM.

Abdul Hameed, Mohammed (2005) A study of mix design and durability of self compacting concrete. Masters thesis, King Fahd University of Petroleum and Minerals.

Ali, Mir Riyaz (2005) Design of microstrip linear phased array antenna using integrated array feeder. Masters thesis, King Fahd University of Petroleum and Minerals.

Al-Hasan, Ahmad Abdulwahab (2005) New issues and problems in the dirac equation and their solutions. Masters thesis, King Fahd University of Petroleum and Minerals.

Hussain, Syed Manzoor (2005) Package cohesion metric for object oriented systems. Masters thesis, King Fahd University of Petroleum and Minerals.

Islam, Syed Mohammed Shamsul (2005) Design of a graphical user interface to augment a telerobotic stereo-vision system. Masters thesis, King Fahd University of Petroleum and Minerals.

Kashif ul Asad, Mohammed (2005) Evaluation of performance measures for materials management process in industrial construction projects. Masters thesis, King Fahd University of Petroleum and Minerals.

Naik, Mohammed Khaliq (2005) The effect of environmental conditions on the hydrostatic burst pressure and impact performance of glass fiber reinforced thermoset pipes. Masters thesis, King Fahd University of Petroleum and Minerals.

Rasheed, Aiman (2005) Designing of objects using smooth cubic splines. Masters thesis, King Fahd University of Petroleum and Minerals.

Sumon, Kazi Zamshad (2005) Extraction of aromatics using green solvents based on ionic liquids. Masters thesis, King Fahd University of Petroleum and Minerals.

Suraizou, Sogome (2005) Non-noetherian krull domains issued from symbolic blow-up and rees algebras. Masters thesis, King Fahd University of Petroleum and Minerals.

Butt, Naveed Razzaq (2005) U-model based adaptive internal model control for tracking of nonlinear dynamic plants. Masters thesis, King Fahd University of Petroleum and Minerals.

Fasiuddin, Mohammed (2005) HVAC system operation strategies for energy conservation and thermal comfort in commercial buildings in Saudi Arabia. Masters thesis, King Fahd University of Petroleum and Minerals.

Ali, Mir Riyaz (2005) Design of microstrip linear phased array antenna using integrated array feeder. Masters thesis, King Fahd University of Petroleum and Minerals.

Saad Bin Mansoor, (2005) Laser evaporative heating in relation to machining. Masters thesis, King Fahd University of Petroleum and Minerals.

Ahmad, Aijaz (2005) Symmetry solutions of some nonlinear PDE's. Masters thesis, King Fahd University of Petroleum and Minerals.

Al-Qahtani, Turki Abdul-Aziz (2005) Effects of strain rate and temperature on fracture toughness and tensile properties of CPVC. Masters thesis, King Fahd University of Petroleum and Minerals.

Ahmad, Aijaz (2005) Symmetry solutions of some nonlinear PDE's. Masters thesis, King Fahd University of Petroleum and Minerals.

Basha, Mehaboob N. B. (2005) Prediction of turbulent heat transfer in a rotating narrow rectangular channel (AR=10) oriented at 120° from the direction of rotation. Masters thesis, King Fahd University of Petroleum and Minerals.

Al-Abbas, Nabil H. (2005) Saturation of current transformers and its impact on digital overcurrent relays. Masters thesis, King Fahd University of Petroleum and Minerals.

Al Athel, Khaled S. (2005) Effect of piezoelectric actuator placement on controlling the modes of vibration for flexible structures. Masters thesis, King Fahd University of Petroleum and Minerals.

Al Athel, Khaled S. (2005) Effect of piezoelectric actuator placement on controlling the modes of vibration for flexible structures. Masters thesis, King Fahd University of Petroleum and Minerals.

Abidur Rahman, Quazi (2005) Handling imprecision and uncertainty in software quality models. Masters thesis, King Fahd University of Petroleum and Minerals.

Ba-Abbad, Emran A. (2005) Ant colony multi-optimization algorithm for circuit bi-partitioning. Masters thesis, King Fahd University of Petroleum and Minerals.

Al Zahrani, Abdallah Muhammad (2005) Behavior of transmitted wave in gain media. Masters thesis, King Fahd University of Petroleum and Minerals.

Al-Hajailan, Wael Ibrahim (2005) Study of imperfect production processes with shortages. Masters thesis, King Fahd University of Petroleum and Minerals.

Al-Khoraidly, Abdulaziz Mohammad (2005) Serial-serial finite field multiplication. Masters thesis, King Fahd University of Petroleum and Minerals.

Al-Muhiameed, Zeid (2005) On some seismic inverse problems. PhD thesis, King Fahd University of Petroleum and Minerals.

Al-Sawadi, Hussam Eddin Abdullah (2005) An architecture for secure document flow and archival systems. Masters thesis, King Fahd University of Petroleum and Minerals.

Al-Shammasi, Wesam Abdullah (2005) An adaptive neural networks controller for the inline surface oil/water separator. Masters thesis, King Fahd University of Petroleum and Minerals.

Al-Zahrani, Khalid Mousa (2005) Fuzzy takagi-sugeno and LMS based control techniques. Masters thesis, King Fahd University of Petroleum and Minerals.

Kabir, Muhammad Ehsanul (2005) Numerical investigation of erosion of a pipe protruded in a sudden contraction. Masters thesis, King Fahd University of Petroleum and Minerals.

Nafees, Ahmad (2005) Electrochemical removal of carbon monoxide from hydrogen using nickel catalyst. Masters thesis, King Fahd University of Petroleum and Minerals.

Shwehneh, Abdullah B. (2005) Development of reconfigurable nonlinear circuits for neural networks. Masters thesis, King Fahd University of Petroleum and Minerals.

Al-Dharrab, Mohannad Ahmad Abdulaziz (2005) Benchmarking framework for software watermarking. Masters thesis, King Fahd University of Petroleum and Minerals.

Charifa, Mohammad Samer (2005) Continuous proximate time-optimal control for a third order servomechanism having a plant with three real roots. Masters thesis, King Fahd University of Petroleum and Minerals.

Ba-Abbad, Emran A. (2005) Ant colony multi-optimization algorithm for circuit bi-partitioning. Masters thesis, King Fahd University of Petroleum and Minerals.

Al-Shammary, Rakan A. (2005) FATIGUE BEHAVIOUR OF HIC DAMAGED LINE PIPE STEEL. Masters thesis, King Fahd University of Petroleum and Minerals.

Abu-Thabit, Nidal Y. M. (2005) Synthesis of 2-imino-2-oxo-1,3,2-oxazaphosphorinanes. Masters thesis, King Fahd University of Petroleum and Minerals.

Ali, Mir Farooq (2005) Efficacy of contractor prequalification models. Masters thesis, King Fahd University of Petroleum and Minerals.

Bamasak, Saleh Mohammad (2005) Facts-based stabilizers for power system stability enhancement. Masters thesis, King Fahd University of Petroleum and Minerals.

Al-Hammali, Hussain Yahya (2005) Absolutely pure modules and related concepts. Masters thesis, King Fahd University of Petroleum and Minerals.

Al-Salman, Abdul Muttaleb Ali (2005) Numerical investigations of melting of ice in a box. Masters thesis, King Fahd University of Petroleum and Minerals.

Hafeez, Syed (2005) A study of the static and dynamic properties of Al-Based A1₂O₃ metal matrix composites. Masters thesis, King Fahd University of Petroleum and Minerals.

Hussain, Ganiyu Babatunde (2005) Design and implementation of all-digital CDMA code tracking loops. Masters thesis, King Fahd University of Petroleum and Minerals.

Iqbal, Imran (2005) The impact of HVAC system selection and operation on energy conservation in an office building in hot and humid climates of Saudi Arabia. Masters thesis, King Fahd University of Petroleum and Minerals.

Islam, Mohammad Rafiqul (2005) Approximation by wavelets. Masters thesis, King Fahd University of Petroleum and Minerals.

Jide, Olanrewaju Moshood (2005) Development and application of linear state estimators in control of reactive distillation. Masters thesis, King Fahd University of Petroleum and Minerals.

Khan, Faisal Nawaz (2005) FSM state-assignment for area, power and testability using non-deterministic evolutionary heuristics. Masters thesis, King Fahd University of Petroleum and Minerals.

Khan, Muhammad Kashif Saeed (2005) Automatic classification of speech and music in digitized audio. Masters thesis, King Fahd University of Petroleum and Minerals.

Quadri, Itrat Rasool (2005) Measurement based comparison between VoIPoMPLS and VoIP using software routers. Masters thesis, King Fahd University of Petroleum and Minerals.

Samivullah, Shaik (2005) Laminar mixed convection in vertical channels. Masters thesis, King Fahd University of Petroleum and Minerals.

Dalhat, Mu'azu Nuhu (2005) Effect of rate of water table rise on LNAPL entrapment in uniform and well-graded sands. Masters thesis, King Fahd University of Petroleum and Minerals.

Ali, Mir Farooq (2005) Efficacy of contractor prequalification models. Masters thesis, King Fahd University of Petroleum and Minerals.

Aregbesola, Mayowa Kassim (2005) Code acquisition in DS-CDMA systems optimization and DSP implementation. Masters thesis, King Fahd University of Petroleum and Minerals.

Bamasak, Saleh Mohammad (2005) Facts-based stabilizers for power system stability enhancement. Masters thesis, King Fahd University of Petroleum and Minerals.

Abdul Qaiyum, Shaik (2005) Modelling of blood flow in a time-varying shape passage. Masters thesis, King Fahd University of Petroleum and Minerals.

Ahmed, Syed Anees (2005) Calibration of VISSIM to the traffic conditions of Khobar and Dammam, Saudi Arabia. Masters thesis, King Fahd University of Petroleum and Minerals.

Bashmal, Salem Mohamed (2005) Finite element analysis of stick-slip vibrations in drillstrings. Masters thesis, King Fahd University of Petroleum and Minerals.

Mahbubul Islam, Mohammad (2005) Analysis of Add/Drop optical waveguide filters with embedded resonant cavities using the method of lines. Masters thesis, King Fahd University of Petroleum and Minerals.

Masood, Mudassir (2005) Multi-scale analysis techniques in pattern recognition systems. Masters thesis, King Fahd University of Petroleum and Minerals.

Ahmed, Syed Anees (2005) Calibration of VISSIM to the traffic conditions of Khobar and Dammam, Saudi Arabia. Masters thesis, King Fahd University of Petroleum and Minerals.

Bashmal, Salem Mohamed (2005) Finite element analysis of stick-slip vibrations in drillstrings. Masters thesis, King Fahd University of Petroleum and Minerals.

Ahmad, Mohd. Irfan (2005) Synthesis and characterization of composite polymeric membranes for proton exchange membrane (PEM) fuel cell applications. Masters thesis, King Fahd University of Petroleum and Minerals.

Ahmed, Mohammed Khaleel (2005) Effect of outflow orientation and multiple jets orifice plate configurations on heat transfer in a rectangular duct. Masters thesis, King Fahd University of Petroleum and Minerals.

Ayoub, Mohammed Abdalla (2005) Development and testing of an artificial neural network model for predicting bottomhole pressure in vertical multiphase flow. Masters thesis, King Fahd University of Petroleum and Minerals.

Ismail, Mohammed (2005) Improving the performance of damaged FBECR in chloride-contaminated concrete. Masters thesis, King Fahd University of Petroleum and Minerals.

Saleem, Muhammad (2005) Assessment of the relationship between the spilled LNAPL volume and its thickness in monitoring wells considering the water table fluctuation history. PhD thesis, King Fahd University of Petroleum and Minerals.

Sirajuddin, Shaik (2005) Extensions to XML-based network management. Masters thesis, King Fahd University of Petroleum and Minerals.

Faisal, Syed Faizullah (2005) Damping enhancement of multimachine power system through STATCOM control. Masters thesis, King Fahd University of Petroleum and Minerals.

Ayoub, Mohammed Abdalla (2005) Development and testing of an artificial neural network model for predicting bottomhole pressure in vertical multiphase flow. Masters thesis, King Fahd University of Petroleum and Minerals.

Ademola, Adeeyo Yisa (2005) Evaluation of empirically derived PVT properties for Nigerian crude oils. Masters thesis, King Fahd University of Petroleum and Minerals.

Adam, Abubakar (2005) Implementation and validation of object-oriented design-level cohesion metrics. Masters thesis, King Fahd University of Petroleum and Minerals.

Azher, Syed Ayub (2005) A prediction model for the residual flexural strength of corroded reinforced concrete beams. Masters thesis, King Fahd University of Petroleum and Minerals.

Al-Juhani, Ahmed Ali (2005) Breakdown of solutions of a system describing heat propagation with second sound. Masters thesis, King Fahd University of Petroleum and Minerals.

Al-Lail, Mohammed Hussain (2005) Wavelets and solution of ordinary differential equations. Masters thesis, King Fahd University of Petroleum and Minerals.

Islam, Md. Ashraful (2005) Structure-property relationships of metallocene linear low density polyethylene (LLDPE). Masters thesis, King Fahd University of Petroleum and Minerals.

Kolus, Ahmet Ahmet (2005) Determining optimal target values for two processes in series. Masters thesis, King Fahd University of Petroleum and Minerals.

Naseem, Imran (2005) Combining classifiers using the dempster-shafer theory of evidence. Masters thesis, King Fahd University of Petroleum and Minerals.

Sami, Muhammad Rehan (2005) Content-aware congestion control over MPLS networks for multimedia transmission. Masters thesis, King Fahd University of Petroleum and Minerals.

Yusuf, Syed Adnan (2005) Identification of Saudi Arabian License Plates. Masters thesis, King Fahd University of Petroleum and Minerals.

Choudhury, Muhammad Badrul Islam (2005) Studies on high performance NI-based composite catalysts for preferential methanation of CO in a SYNGAS. Masters thesis, King Fahd University of Petroleum and Minerals.

Azher, Syed Ayub (2005) A prediction model for the residual flexural strength of corroded reinforced concrete beams. Masters thesis, King Fahd University of Petroleum and Minerals.

Ahmed, Syed Anees (2005) Calibration of VISSIM to the traffic conditions of Khobar and Dammam, Saudi Arabia. Masters thesis, KFUPM.

Dalhat, Muazu Nuhu (2005) Effect of rate of water table rise on LNAPL entrapment in uniform and well-graded sands. Masters thesis, KFUPM.

civil, civil (2005) Pullout capacity of block anchor in sand. Masters thesis, KFUPM.

Al-Kutti, Walid Abubaker (2005) Compliance criteria for quality concrete. Masters thesis, KFUPM.

Gazi, Syed Abdul Muqtader (2005) Durability performance of GFRP bars under aggressive local exposure conditions. Masters thesis, KFUPM.

Naffa'a, Mahmoud Y. (2005) RBF-based meshless method for the analysis of thin elastic plates undergoing large deflections. Masters thesis, KFUPM.

Saleem, Muhammad (2005) Assessment of the relationship between the spilled LNAPL volume and its thickness in monitoring wells. PhD thesis, KFUPM.

civil, civil (2005) Treatment of the oil refinery wastewater using photocatalysis. Masters thesis, KFUPM.

Abdul Hameed, Mohammed (2005) A study of mix design and durability of self compacting concrete. PhD thesis, KFUPM.

Al-Shuridah, Obaid (2005) CUSTOMER INTENTION AS THE KEY TO SUCCESSFUL CRM IMPLEMENTATION: EMPIRICAL INSIGHTS FROM AN SEM APPLICATION. PhD thesis, Southern Illinois University at Carbondale.

Azher, Syed Ayub (2005) A prediction model for the residual flexural strength of corroded reinforced concrete beams. Masters thesis, KFUPM.

Ismail, Mohammed (2005) Improving the performance of damaged FBECR in chloride-contaminated concrete. Masters thesis, KFUPM.

Abdul Moied, Mohammed (2004) Assessment of automating facilities management current practices: potential framework models for Saudi Arabian Universities. Masters thesis, King Fahd University of Petroleum and Minerals.

Ahmed, Irshad (2004) Potential impact of the WTO on Saudi construction firms. Masters thesis, King Fahd University of Petroleum and Minerals.

Ahmed, Syed Jawwad (2004) Laboratory study on precipitation of calcium sulphate in berea sandstone cores. Masters thesis, King Fahd University of Petroleum and Minerals.

Al-Anazi, Sami Abdul-Hadi Faraj (2004) Performance of punctured space-time codes over wireless channels and their applications. Masters thesis, King Fahd University of Petroleum and Minerals.

Al-Bashrawi, Saleh Ali (2004) Reductive lie groups and mostow fibration. Masters thesis, King Fahd University of Petroleum and Minerals.

Al-Humaidi, Saleh Ahmed (2004) Inverse scattering transform for variable coefficient KdV equation in shallow water. Masters thesis, King Fahd University of Petroleum and Minerals.

Al-Muntasheri, Ghaithan Ahmad (2004) Rheology of gelling polymers used in reservoir water shutoff treatments. Masters thesis, King Fahd University of Petroleum and Minerals.

Al-Rumaih, Saleh Ibrahim (2004) New algorithms for the identification of a class of hammerstein-wiener nonlinear systems. Masters thesis, King Fahd University of Petroleum and Minerals.

Kareeri, Aqeel Ahmad (2004) Investigations of the flow and pinning phenomena in radial flow reactors. Masters thesis, King Fahd University of Petroleum and Minerals.

Khursheed, Syed Saqib (2004) Test set compaction for sequential circuits based on test relaxation. Masters thesis, King Fahd University of Petroleum and Minerals.

Muhitur Rahman, Muhammad (2004) Treatment of refinery wastewater using crossflow membrane bioreactor (CF-MBR). Masters thesis, King Fahd University of Petroleum and Minerals.

Qhusro, Ahmed Abdul Mujeeb (2004) Invariant object recognition. Masters thesis, King Fahd University of Petroleum and Minerals.

Farooqui, Mohammed Sajeed (2004) Combined electrooxidation and electrocoagulation processes for the treatment of municipal wastewater. Masters thesis, King Fahd University of Petroleum and Minerals.

Gayazullah, Mohammed (2004) Entropy generation around a solid sphere in a gas stream. Masters thesis, King Fahd University of Petroleum and Minerals.

Ahmed, Irshad (2004) Potential impact of the WTO on Saudi construction firms. Masters thesis, King Fahd University of Petroleum and Minerals.

Ahmed, Mujahed (2004) Cryogenic drilling of KevlarTM composite laminates. Masters thesis, King Fahd University of Petroleum and Minerals.

Al-Anazi, Sami Abdul-Hadi Faraj (2004) Performance of punctured space-time codes over wireless channels and their applications. Masters thesis, King Fahd University of Petroleum and Minerals.

Al-Bashrawi, Saleh Ali (2004) Reductive lie groups and mostow fibration. Masters thesis, King Fahd University of Petroleum and Minerals.

Aleemuddin, Mohammed (2004) A Pose invariant face recognition system using subspace techniques. Masters thesis, King Fahd University of Petroleum and Minerals.

Aleemuddin, Mohammed (2004) A Pose invariant face recognition system using subspace techniques. Masters thesis, King Fahd University of Petroleum and Minerals.

Al-Malki, Abdullah (2004) Desulfurization of gasoline and diesel fuels, using non-hydrogen consuming techniques. Masters thesis, King Fahd University of Petroleum and Minerals.

Falqi, Fahad Hussain (2004) Kinetics and equilibrium adsorption of phosphates removal on activated alumina. Masters thesis, King Fahd University of Petroleum and Minerals.

Al-Buraiky, Salah M. S. (2004) Arabic sign language recognition using an instrumented glove. Masters thesis, King Fahd University of Petroleum and Minerals.

Abdulwahhab, Muhammad (2004) Impulsive dynamic boundary value problems on time scales. Masters thesis, King Fahd University of Petroleum and Minerals.

Al-Salman, Ali Abdullah (2004) Assessment of risk management perceptions and practices of construction contractors in Saudi Arabia. Masters thesis, King Fahd University of Petroleum and Minerals.

Al-Shurafa, Ali M. (2004) Investigations on the influence of disk location and unbalance on fluid induced vibrations of a shaft-disk-bearing system. Masters thesis, King Fahd University of Petroleum and Minerals.

Qamar, Sayyad Zahid (2004) Modeling and analysis of extrusion pressure and die life for complex aluminum profiles. PhD thesis, King Fahd University of Petroleum and Minerals.

Al-Soudani, Tareg Mohammed (2004) Modeling and simulation of a combined isomerization reactor/pressures swing adsorption/membrane unit. Masters thesis, King Fahd University of Petroleum and Minerals.

Al-Musabi, Naji A. (2004) Design of optimal variable structure controllers: applications to power system dynamics. Masters thesis, King Fahd University of Petroleum and Minerals.

Siddiqui, Shad Waheed (2004) Numerical and experimental studies of non reactive and reactive mixing. Masters thesis, King Fahd University of Petroleum and Minerals.

Fan, Ramadhan Alaaddin Nouraddin (2004) Investigation of Internet-based SCADA systems: design and applications. Masters thesis, King Fahd University of Petroleum and Minerals.

Abu-Sada, Mohammed Yousef (2004) Cost effective design of conventional type distribution transformer using optimization techniques. Masters thesis, King Fahd University of Petroleum and Minerals.

Ahcom, Junaid (2004) A model for benchmarking contractors project management elements in Saudi Arabia. Masters thesis, King Fahd University of Petroleum and Minerals.

Al-Awami, Ali Taleb (2004) Design of robust PSS and facts-based controllers for stability enhancement of power systems. Masters thesis, King Fahd University of Petroleum and Minerals.

Ameeruddin, Mohammed (2004) Pade approximants technique for the analysis of waveguide junctions and beam splitters. Masters thesis, King Fahd University of Petroleum and Minerals.

Al-Betar, Abdul-Rahman Faisal (2004) Photophysical behavior of 1,8-diaminonaphthalene in acidic aqueous solutions and in zeolite sieves. Masters thesis, King Fahd University of Petroleum and Minerals.

Iliyas, AbdulJelil (2004) Xylene stransformation over Y zeolite in a fluidized-bed reactor. Masters thesis, King Fahd University of Petroleum and Minerals.

Malaibari, Zuhair Omar (2004) Corrosion behavior of mild steel under atmospheric and accelerated conditions after treatment by several inhibitor solutions. Masters thesis, King Fahd University of Petroleum and Minerals.

Al-Qahtani, Ali Saeed (2004) Two-point boundary value problems for first order impulsive differential equations. Masters thesis, King Fahd University of Petroleum and Minerals.

Al-Thagfi, Jameel (2004) Catalytic carbonylation of terminal alkyne with amine: computational and experimental investigations of regioselectivity. Masters thesis, King Fahd University of Petroleum and Minerals.

Haseembuddin, Mohammed (2004) Internal model control for nonlinear dynamic plants using U-model. Masters thesis, King Fahd University of Petroleum and Minerals.

Hermadi, Irman (2004) Genetic algorithm based test data generator. Masters thesis, King Fahd University of Petroleum and Minerals.

Iqbal, Mohammad Hasan (2004) Influence of polymer type and structure on polymer modification of Saudi asphalt. Masters thesis, King Fahd University of Petroleum and Minerals.

Mahmoud, Muhammad Yahya Imam (2004) Design and modeling of high speed modulo multipliers for cryptosystems. Masters thesis, King Fahd University of Petroleum and Minerals.

Al-Ghamdi, Mohammad Khalaf Hamdan (2004) CMOS bandpass filters for low-IF Bluetooth receiver. Masters thesis, King Fahd University of Petroleum and Minerals.

Fares, Osama Oglah (2004) Configurable analog building blocks for field programmable analog arrays. PhD thesis, King Fahd University of Petroleum and Minerals.

Ali, Bakhtiar Qutub (2004) A new blind equalization scheme using the principle of minimal disturbance. Masters thesis, King Fahd University of Petroleum and Minerals.

Ameeruddin, Mohammed (2004) Pade approximants technique for the analysis of waveguide junctions and beam splitters. Masters thesis, King Fahd University of Petroleum and Minerals.

Abdur Razzak, Shaikh (2004) Numerical investigations of flow in a partially packed vessel. Masters thesis, King Fahd University of Petroleum and Minerals.

Maadi, Feras Ali Mohammed (2004) Designing a self-timed arithmetic logic unit. Masters thesis, King Fahd University of Petroleum and Minerals.

Khurshid, Hassan (2004) Effect of bolt layout on the mechanical behavior of bolted joint. Masters thesis, King Fahd University of Petroleum and Minerals.

Qureshi, Bilal Ahmed (2004) Design, rating and exergy analysis of evaporative heat exchangers. Masters thesis, King Fahd University of Petroleum and Minerals.

Fakhruz Zaman, Sharif (2004) Diffusion and adsorption of aromatics in zeolites by zero length column technique. Masters thesis, King Fahd University of Petroleum and Minerals.

Abdur Razzak, Shaikh (2004) Numerical investigations of flow in a partially packed vessel. Masters thesis, King Fahd University of Petroleum and Minerals.

Al-Ghamdi, Fayez Hasen Mohammed (2004) Transient impulsive flow about a sphere in a gas stream. Masters thesis, King Fahd University of Petroleum and Minerals.

Khan, Mohammed Zahed Mustafa (2004) Analysis of one and two dimensional bandgap structures using automated method of lines with arbitrary longitudinal discontinuities. Masters thesis, King Fahd University of Petroleum and Minerals.

Hussain, Syed Ameenuddin (2004) IDENTIFICATION AND CONTROL STRATEGY APPLIED IN LOAD MANAGEMENT OF RESIDENTIAL AIR-CONDITIONERS. Masters thesis, KFUPM.

Ali, Walid Mohammed El-Mahdi Siddig (2004) Studies on soil-foundation interaction in the Sabkha environment of Eastern Saudi Arabia. Masters thesis, King Fahd University of Petroleum and Minerals.

Al-Hulail, Muhammad Mahdi Ibrahim (2004) Optimal power flow with FACTS devices. Masters thesis, King Fahd University of Petroleum and Minerals.

Hussain, Syed Ameenuddin (2004) Identification and control strategy applied in load management of residential air-conditioners. Masters thesis, King Fahd University of Petroleum and Minerals.

Al-Khater, Mubarak A. (2004) Study of natural convection from cylindrical surfaces embedded in porous media by LDCT. Masters thesis, King Fahd University of Petroleum and Minerals.

Jaweed, Mohammed Riaz (2004) An implementation model for design-build (D-B) project delivery system. Masters thesis, King Fahd University of Petroleum and Minerals.

Khan, Sohel (2004) Design level coupling metrics for UML models. Masters thesis, King Fahd University of Petroleum and Minerals.

Mahmood, Syed Iftekhar (2004) Impact testing of brittle materials using split hopkinson pressure bar technique. Masters thesis, King Fahd University of Petroleum and Minerals.

Al-Naeem, Walid A. (2004) Hydrocracking catalysts for vacuum gas oil and de-metallized oil blend. Masters thesis, King Fahd University of Petroleum and Minerals.

Al-Saifi, Nayef M. (2004) Numerical analysis of entropy generation in laminar viscous fluid flow between parallel plates. Masters thesis, King Fahd University of Petroleum and Minerals.

Salam-Alada, Amisu Oluwakemi (2004) Performance analysis and modeling of disk I/O subsystem in high throughput servers. Masters thesis, King Fahd University of Petroleum and Minerals.

Riyazuddin, Mohammed (2004) Visualization with NURBS using simulated annealing optimization technique. Masters thesis, King Fahd University of Petroleum and Minerals.

Saghir, Shaikh Farrukh (2004) Effect of frequency on crack propagation in CPVC and HDPE at different temperatures. Masters thesis, King Fahd University of Petroleum and Minerals.

Ali, Walid Mohammed El-Mahdi Siddig (2004) Studies on soil-foundation interaction in the Sabkha environment of Eastern Saudi Arabia. Masters thesis, King Fahd University of Petroleum and Minerals.

civil, civil (2004) Studies on soil-foundation interaction in the Sabkha environment of Eastern Saudi Arabia. Masters thesis, KFUPM.

Akhtar, Naeem (2004) Optimal locations of booster disinfection stations in Al-Khobar water distribution system. Masters thesis, KFUPM.

Farooqui, Mohammed Sajeed (2004) Combined electrooxidation and electrocoagulation processes for the treatment of municipal wastewater. Masters thesis, KFUPM.

Mohammed, Aliyu Shazali (2004) Computational chemo-damage transport modeling of durability synergies in concrete. PhD thesis, KFUPM.

civil, civil (2004) Treatment of refinery wastewater using crossflow membrane bioreactor. Masters thesis, KFUPM.

Abdul Hameed, (2003) Laser induced photocatalytic conversion of methane into methanol. PhD thesis, King Fahd University of Petroleum and Minerals.

Abo-Ghander, Nabeel Salem M. (2003) Removal of heavy metal ions using a novel integrated electrolytic-electrodialytic process. Masters thesis, King Fahd University of Petroleum and Minerals.

Abbasi, Sarfraz Haider (2003) Preparation and characterization of polypropylene/palm fiber composites. Masters thesis, King Fahd University of Petroleum and Minerals.

Al-Abeedi, Saad Saeed (2003) Adaptive forward error correction coding for diversity communication systems. Masters thesis, King Fahd University of Petroleum and Minerals.

Anwar, Sohail (2003) Natural convection flow in parallel-plate vertical channels. Masters thesis, King Fahd University of Petroleum and Minerals.

Chaudry, Rehan Anwar (2003) Investigation of degradation of NBR and HNBR elastomers by light scattering rheology and molecular dynamics techniques. Masters thesis, King Fahd University of Petroleum and Minerals.

Al-Shridi, Sami Hamad Saleh (2003) Integrated deterministic/probabilistic petroleum volume evaluation for a carbonate reservoir. Masters thesis, King Fahd University of Petroleum and Minerals.

Zafar, Salman (2003) Influence of temperature and wind on moisture transport in cementitious materials. Masters thesis, King Fahd University of Petroleum and Minerals.

Syed, Sanaullah/SS (2003) Parallelization of Iterative Heuristic for Performance-Driven Low-Power VLSI Standard Cell Placement. Masters thesis, King Fahd University of Petroleum & Minerals.

Al-Saiari, Uthman Salem (2003) Digital circuit design through simulated evolution. Masters thesis, King Fahd University of Petroleum and Minerals.

Sarif, Bambang Ali Basyah (2003) Modified ANT colony algorithm for combinational logic circuits design. Masters thesis, King Fahd University of Petroleum and Minerals.

Syed, Juned Laiq (2003) Risk and hydraulic reliability analysis of water distribution systems. Masters thesis, King Fahd University of Petroleum and Minerals.

Amjad, Shiraz (2003) Closed loop identification for model predictive control: a case study. Masters thesis, King Fahd University of Petroleum and Minerals.

Osais, Yahya Esmail (2003) Efficient static test compaction algorithms for combinational circuits based on test relaxation. Masters thesis, King Fahd University of Petroleum and Minerals.

Al-Amoudi, Abdullah Saeed (2003) Air conditioners performance using soft starter. Masters thesis, King Fahd University of Petroleum and Minerals.

Ahmed, Mohammed Jameel (2003) License plate recognition system. Masters thesis, King Fahd University of Petroleum and Minerals.

Al-Attas, Omar Ghazi Omar (2003) The Production of activated carbon from local palm-date pits for pollution removal process. Masters thesis, King Fahd University of Petroleum and Minerals.

Arshad, Kamran (2003) Channel estimation in OFDM systems. Masters thesis, King Fahd University of Petroleum and Minerals.

Asif, Munib Ahmad (2003) Critical success factor for different project objectives. Masters thesis, King Fahd University of Petroleum and Minerals.

Al-Fadhli, Hussain Yahya (2003) Performance evaluation of (HVOF) thermal spray coating using INCONEL-625 powder. Masters thesis, King Fahd University of Petroleum and Minerals.

Faheem, Mohammad (2003) A Study of tensile and microhardness properties of m-LLDPE/LDPE blends. Masters thesis, King Fahd University of Petroleum and Minerals.

Farooq, Syed Omer (2003) Identification and control of a class of nonlinear systems. Masters thesis, King Fahd University of Petroleum and Minerals.

Ibrahim, Ahmed Doko (2003) Cost implications of architectural dlesign variables. Masters thesis, King Fahd University of Petroleum and Minerals.

Iqbal, Asif (2003) Multistream realtime control of a distributed telerobotic system. Masters thesis, King Fahd University of Petroleum and Minerals.

Khursheed, Syed Naveed (2003) Economic production quantity models with variable production rates. Masters thesis, King Fahd University of Petroleum and Minerals.

Al-Nasser, Adel Mohammed Hussain (2003) Optimization of a packaged air conditioning unit performance using an experimentally validated CFD model. Masters thesis, King Fahd University of Petroleum and Minerals.

Noman, Syed Mubasher (2003) Effect of quality on lotsizing, warranty and inventory control decisions. Masters thesis, King Fahd University of Petroleum and Minerals.

Al-Salman, Hesham Muhammad Ibrahim (2003) Application of space-time trellis codes for image transmission over wireless channels. Masters thesis, King Fahd University of Petroleum and Minerals.

Saif, Waleed Abdulwahed (2003) Adaptive multiuser detection with decision feedback equalizer for interference cancellation. Masters thesis, King Fahd University of Petroleum and Minerals.

Al-Sulaiman, Fahad A. (2003) Test facility development for small centrifugal compressors (design stage). Masters thesis, King Fahd University of Petroleum and Minerals.

Ya'uisa, Garba (2003) Memory performance evaluation of high throughput servers. Masters thesis, King Fahd University of Petroleum and Minerals.

Ya'uisa, Garba (2003) Memory performance evaluation of high throughput servers. Masters thesis, King Fahd University of Petroleum and Minerals.

Abujiya, Mu'azu Ramat (2003) Some aspects of statistical quality control using ranked set sampling. Masters thesis, King Fahd University of Petroleum and Minerals.

Ahmad, Shafique (2003) Chain transfer agents: characterization and their use in polymerization reactions. PhD thesis, King Fahd University of Petroleum and Minerals.

Arshed, Ghulam Murshed (2003) Transiently developing free and opposing jets in relation to gas-assisted laser evaporative heating process. Masters thesis, King Fahd University of Petroleum and Minerals.

Khan, Sajid Anwar (2003) An investigation into the error performance of vertical-bell labs layered space-time architecture V-blast. Masters thesis, King Fahd University of Petroleum and Minerals.

Mazumder, Mohammad Abu Jafar (2003) Synthesis and solution properties of some polysulfobetaines. Masters thesis, King Fahd University of Petroleum and Minerals.

Al-Ghamdi, Khaled Hamed Abdullah (2003) Environmental impact on residential load modeling. Masters thesis, King Fahd University of Petroleum and Minerals.

Ali, Syed Imran (2003) Effects of aggregate quality on reinforcement corrosion. Masters thesis, King Fahd University of Petroleum and Minerals.

El-Badawi, Khalid Abdalla (2003) Performance evaluation of interrupt handling schemes in gigabit network. Masters thesis, King Fahd University of Petroleum and Minerals.

Al-Garni, Said Ali (2003) Numerical study of volterra difference equations of the second kind. Masters thesis, King Fahd University of Petroleum and Minerals.

Mousa, Wail Abdul-Hakim (2003) Entropy-constrained reflected residual vector quantization with application to image coding. Masters thesis, King Fahd University of Petroleum and Minerals.

Saliu, Moshood Omolade (2003) Adaptive fuzzy logic based framework for software development effort prediction. Masters thesis, King Fahd University of Petroleum and Minerals.

Alshahrani, Mohammed M. (2003) Mixed semidefinite and second-order cone optimization approach for the Hankel Matrix approximation problem. Masters thesis, King Fahd University of Petroleum and Minerals.

Abdy, Zeeshan Raza (2003) Causes of female teacher work trip accidents in the Kingdom of Saudi Arabia. Masters thesis, King Fahd University of Petroleum and Minerals.

Chowdhury, Muhammad Reazuddin (2003) Monitoring fluid fron movement using permanent resistivity arrays. Masters thesis, King Fahd University of Petroleum and Minerals.

Al-Muftah, Ali Ebrahim (2003) Theoretical analysis and simulation of immobilized enzyme reactors. Masters thesis, King Fahd University of Petroleum and Minerals.

Al-Ghamdi, Khalid Saleh (2003) Investigation of structural stability and vibrational spectra of some organizations. Masters thesis, King Fahd University of Petroleum and Minerals.

Aminuddin, Mohammad (2003) Simulation of a simulated moving bed reactor for hydrocarbon isomerization. Masters thesis, King Fahd University of Petroleum and Minerals.

Arbab, Adam Musa Giri (2003) Influence of molecular parameters on the miscibility of metallocene LLDPE and HDPE blends: rheological and molecular dynamics simulation investigation. Masters thesis, King Fahd University of Petroleum and Minerals.

Kalyandurg, Iqbal Basha (2003) Study of reaction kinetics of a submerged membrane activated sludge process. PhD thesis, King Fahd University of Petroleum and Minerals.

Khan, Rizwan (2003) Metal incorporation in MCM-41 for hydrodesulfurization. Masters thesis, King Fahd University of Petroleum and Minerals.

Rufai, Raimi Ayinde (2003) New structural similarity metrics for UML models. Masters thesis, King Fahd University of Petroleum and Minerals.

Al-Shahrani, Farhan Mohammad (2003) Study of octane enhancers for gasoline in the Kingdom of Saudi Arabia. Masters thesis, King Fahd University of Petroleum and Minerals.

Abdy, Zeeshan Raza (2003) Causes of female teacher work trip accidents in the Kingdom of Saudi Arabia. Masters thesis, KFUPM.

Syed, Juned Laiq (2003) Risk and hydraulic reliability analysis of water distribution systems. Masters thesis, KFUPM.

civil, civil (2003) Study of reaction kinetics of a submerged membrane activated sludge process. PhD thesis, KFUPM.

civil, civil (2003) The Production of activated carbon from local palm-date pits for pollution removal process. Masters thesis, KFUPM.

Ali, Syed Imran (2003) Effects of aggregate quality on reinforcement corrosion. Masters thesis, KFUPM.

Zafar, Salman (2003) Influence of temperature and wind on moisture transport in cementitious materials. Masters thesis, KFUPM.

Hamid, Mir Sabeer (2002) Investigating smart classroom acoustics utilizing computer modeling. Masters thesis, King Fahd University of Petroleum and Minerals.

Kafini, Mohammed Mustafa (2002) Fractional calculus and some of its applications. Masters thesis, King Fahd University of Petroleum and Minerals.

Khan, Ifadat Ali (2002) Deactivation of dehydration adsorbents. PhD thesis, King Fahd University of Petroleum and Minerals.

Al-Marzoug, Saeed Majed Turki (2002) Noise and disorder effects on front propagation in non-linear media. Masters thesis, King Fahd University of Petroleum and Minerals.

Al-Muhammad, Anwar Saleh (2002) The effect of the gravitational mass on the electromagnetic radiation from an oblique, relativistically rotating dipole. Masters thesis, King Fahd University of Petroleum and Minerals.

Jamal, Ahmad (2002) Conjugate Free Convection Heat Transfer in Vertical Eccentric Annuli. Masters thesis, King Fahd University of Petroleum and Minerals.

Abdul Gaffar, Mohammed Salman (2002) A Study of dehumidification and regeneration processes in a hybrid cooling system. Masters thesis, King Fahd University of Petroleum and Minerals.

Ahmad, Abid Maqsood (2002) Development of an equivalent dispersion coefficient for a complex contaminant transport model. Masters thesis, King Fahd University of Petroleum and Minerals.

Ayinde, Taofeek Foluso (2002) Wakel flow with varying separatin points. PhD thesis, King Fahd University of Petroleum and Minerals.

El Hassan, Waleed Mohamed (2002) Khafji reservoir mechanical properties calibration and in-situ stress modeling, Zuluf field, Eastern Saudi Arabia. Masters thesis, King Fahd University of Petroleum and Minerals.

Jamal, Ahmad (2002) Conjugate free convection heat transfer in vertical eccentric annuli. Masters thesis, King Fahd University of Petroleum and Minerals.

Khokhar, Zahid Hafeez (2002) Investigations of mixing in pipelines with side-, opposed-, and multiple-tees. Masters thesis, King Fahd University of Petroleum and Minerals.

Mahmoud, Isam Abaker (2002) Performance modification of Saudi-asphalt binders using SABIC polymers. Masters thesis, King Fahd University of Petroleum and Minerals.

Al-Muslim, Husain Muhammad (2002) Energy and exergy analyses of crude oil distillation plants. Masters thesis, King Fahd University of Petroleum and Minerals.

Al-Utaibi, Khaled Abdul-Aziz (2002) An Efficient test-pattern relaxation technique for synchronous sequential circuits. Masters thesis, King Fahd University of Petroleum and Minerals.

Rabayah, Akram Awni Mohammed Hamad (2002) Finite element modeling and analysis of rotor-bearing systems. Masters thesis, King Fahd University of Petroleum and Minerals.

Al-Suwaiyan, Ali Saleh Mohammed (2002) Efficient test relaxation techniques for combinational logic circuits. Masters thesis, King Fahd University of Petroleum and Minerals.

Abiola, Taofiq Olatunbosun (2002) Plastic shrinkage cracking of blended cement concretes under hot weather conditions. Masters thesis, King Fahd University of Petroleum and Minerals.

Al-Abaji, Raslan Hashim (2002) Evolutionary techniques for multi-objective VLSI netlist partitioning. Masters thesis, King Fahd University of Petroleum and Minerals.

Gutub, Adnan (2002) New Hardware Algorithms and Designs for Montgomery Modular Inverse Computation in Galois Fields GF(p) and GF(2n). PhD thesis, Oregon State University.

Al-Anazi, Meshal Abdullah (2002) Industrial plants reliability evaluation. Masters thesis, King Fahd University of Petroleum and Minerals.

Azmath, Shaik Khasimul (2002) Scheduling courses in a university. Masters thesis, King Fahd University of Petroleum and Minerals.

Siddiqui, Khurshid Alam (2002) Impact of building rezoning and change of use on energy consumption and occupants thermal comfort. Masters thesis, King Fahd University of Petroleum and Minerals.

Abdullah, Alisher (2002) Analysis and application of evanescent field enhancement in multi-layer arrow waveguide. Masters thesis, King Fahd University of Petroleum and Minerals.

Al-Ali, Mustafa Naser Ali (2002) Use of vibrator performance data to improve near-surface velocity determination. Masters thesis, King Fahd University of Petroleum and Minerals.

Al-Aqeeli, Naser M. (2002) Oxidation/carburization behavior of high temperature alloys. Masters thesis, King Fahd University of Petroleum and Minerals.

Al-Bagawi, Jamil Jarallah Awadh (2002) Fouling analysis and its mitigation in heat exchangers. PhD thesis, King Fahd University of Petroleum and Minerals.

Hameeduddin, Mohammed (2002) Evaluation of load transfer in axially loaded repaired concrete columns. Masters thesis, King Fahd University of Petroleum and Minerals.

Alnaser, Hussein A. (2002) Finite element dynamic analysis of drillstring. Masters thesis, King Fahd University of Petroleum and Minerals.

Owais, Malik Ahmed (2002) Dynamic similarity metric for case-based planning under imperfection. Masters thesis, King Fahd University of Petroleum and Minerals.

Raza, Syed Asif (2002) Jobs scheduling on single machine under various maintenance policies. Masters thesis, King Fahd University of Petroleum and Minerals.

Ruchuan, Yin (2002) Carburization behavior of iron-based alloys in methane/hydrogen gas mixtures. PhD thesis, King Fahd University of Petroleum and Minerals.

Siddiqui, Aamir (2002) Reservoir quality of the Unayzah formation in Waqr, Tinat, and Haradh fields. Masters thesis, King Fahd University of Petroleum and Minerals.

Siddiqui, Mohammed Amjad Ali (2002) Optimum process targeting with error and error-free sampling inspection plan. Masters thesis, King Fahd University of Petroleum and Minerals.

Waziri, Saidu Muhammad (2002) Protein partitioning in pH-responsive polymeric amino acid and assocating polymers. Masters thesis, King Fahd University of Petroleum and Minerals.

Al-Ahmadi, Saad Muhammed (2002) Channel modeling and perforamce analysis of directive wideband Nakagami fading channels. Masters thesis, King Fahd University of Petroleum and Minerals.

Ba-Shammakh, Mohammed S. (2002) Electropolymerization of pyrrole on mild steel for corrosion protection. Masters thesis, King Fahd University of Petroleum and Minerals.

Ibrahim, Sami Osman (2002) An integrated geological modeling of the Arab-D reservoir, Uthmaniyah area Ghawar field. Masters thesis, King Fahd University of Petroleum and Minerals.

Al-Shammari, Abdallah A. (2002) Copper recovery from wastewater using an electrochemical rotating barrel reactor. Masters thesis, King Fahd University of Petroleum and Minerals.

Zamin, Syed Ali (2002) Integrated quality and maintenance models for multi-stage production systems with batch shipments. Masters thesis, King Fahd University of Petroleum and Minerals.

Masood, Khalid (2002) Some exact and approximate inverse boundary and scattering problems. PhD thesis, King Fahd University of Petroleum and Minerals.

Tawabini, Bassam Shafiq (2002) Treatment of water contaminated with dimethyl phthalate by Fenton, Photo-Fenton and UV/H₂O₂ processes. PhD thesis, King Fahd University of Petroleum and Minerals.

Ahmad, Saeed (2002) Synthesis, characterization and NMR studies of some gold(I) and silver(I) complexes with cyanide, thiones and selenones. PhD thesis, King Fahd University of Petroleum and Minerals.

Al-Harthi, Abdulkhaliq Jraib (2002) Design of telerobotic system over a local area network (LAN). Masters thesis, King Fahd University of Petroleum and Minerals.

Khan, Ovaisullah (2002) Thermo-mechanical modeling of tool and workpiece interface in metal forming process. Masters thesis, King Fahd University of Petroleum and Minerals.

Basha, Syed Anwar (2002) Characteristic study of catastrophic tire failure in Eastern Province of Saudi Arabia. Masters thesis, KFUPM.

Mahmoud, Isam Abaker (2002) Performance modification of Saudi-asphalt binders using SABIC polymers. Masters thesis, KFUPM.

Ahmad, Abid Maqsood (2002) Development of an equivalent dispersion coefficient for a complex contaminant transport model. Masters thesis, KFUPM.

Tawabini, Bassam Shafiq (2002) Treatment of water contaminated with dimethyl phthalate by Fenton, Photo-Fenton and UV/H₂O₂ processes. PhD thesis, KFUPM.

Abiola, Taofiq Olatunbosun (2002) Plastic shrinkage cracking of blended cement concretes under hot weather conditions. Masters thesis, KFUPM.

Hameeduddin, Mohammed (2002) Evaluation of load transfer in axially loaded repaired concrete columns. Masters thesis, KFUPM.

Abdul Razzak, Muhammad Faisal (2001) A Web-based automatic outline capturing of images. Masters thesis, King Fahd University of Petroleum and Minerals.

Ali, Syed Saad Azhar (2001) Identification of Hammerstein and Wiener models using radial basis functions neural networks. Masters thesis, King Fahd University of Petroleum and Minerals.

Kandlawala, Muhammad Fareed (2001) Investigation of dynamic behavior of power system installed with statcom. Masters thesis, King Fahd University of Petroleum and Minerals.

Al-Ramadan, Khalid Abdulsamad (2001) Diagenesis of Jauf sandstone in Hawiyah area. Masters thesis, King Fahd University of Petroleum and Minerals.

Shah, Mohammed Jalaluddin (2001) Build operate transfer (BOT) project delivery system in Saudi Arabia. Masters thesis, King Fahd University of Petroleum and Minerals.

Siddiqui, Mohammed Ali (2001) Development of a multiresolution framework for NURBS. Masters thesis, King Fahd University of Petroleum and Minerals.

Al-Zayer, Ali Dhaif (2001) Analytical and finite element investigation of initial clearance effect on tube-to-tubesheet joint strength. Masters thesis, King Fahd University of Petroleum and Minerals.

Al-Ghamdi, Ahmed Ali (2001) Evaluation of the construction equipment replacement policies of construction contractors in the Eastern Province of Saudi Arabia. Masters thesis, King Fahd University of Petroleum and Minerals.

Mohammed, Aman Hassen (2001) Effect of drilling fluid particle sizes on formation damage: application to horizontal well. Masters thesis, King Fahd University of Petroleum and Minerals.

Naqavi, Iftekhar Zaheer (2001) Conduction and non-conduction limited laser heating process- mathematical simulation. Masters thesis, King Fahd University of Petroleum and Minerals.

Al-Safwani, Maitham Muhsen (2001) Signal strength prediction in the Eastern region of Saudi Arabia. Masters thesis, King Fahd University of Petroleum and Minerals.

Al-Awwami, Zaki (2001) New mechanisms for improved adaptive routing in wormhole networks. Masters thesis, King Fahd University of Petroleum and Minerals.

Hamid, Muhammad (2001) Code acquisition technique using adaptive filters in wireless communication. Masters thesis, King Fahd University of Petroleum and Minerals.

Abdul Majid, Mohammed (2001) Analysis of multi-layer arrow planar waveguide for evanescent field enhancement in low-index. Masters thesis, King Fahd University of Petroleum and Minerals.

Al-Mubarak, Mohammad Hasan Mohammad (2001) Detection of high impedance faults using artificial neural networks. Masters thesis, King Fahd University of Petroleum and Minerals.

Mohammed, Yassir Obeid (2001) Quality of service routing. Masters thesis, King Fahd University of Petroleum and Minerals.

Ahmed, Adel Fadhl Noor (2001) Multiselection on some interconnection networks. Masters thesis, King Fahd University of Petroleum and Minerals.

Tahir, Muhammad Atif (2001) QoS-driven multicast routing algorithms. Masters thesis, King Fahd University of Petroleum and Minerals.

Bagalagel, Saleh Mahfoudh (2001) The Effect of temperature dependent viscosity variation on the performance of heat exchangers. Masters thesis, King Fahd University of Petroleum and Minerals.

Barnawi, Abdulaziz Yagoub (2001) Multicast routing protocol with partial flooding for ad hoc wireless networks. Masters thesis, King Fahd University of Petroleum and Minerals.

Khan, Esam Ali Hasan (2001) A Two-dimensional geometric-shapes-based compression scheme for deterministic testing of systems-on-a-chip. Masters thesis, King Fahd University of Petroleum and Minerals.

Minhas, Mahmood-ur-Rehman (2001) Iterative algorithms for timing and low power driven VLSI standard-cell placement. Masters thesis, King Fahd University of Petroleum and Minerals.

Al-Yousif, Fawzi A. (2001) Assessment of constructability practices among general contractors in the Eastern Province of Saudi Arabia. Masters thesis, King Fahd University of Petroleum and Minerals.

Shazli, Syed Zafar (2001) Experimenting with evolutionary meta-heuristics for state justification in sequential ATPG. Masters thesis, King Fahd University of Petroleum and Minerals.

Al-AlShaikh, Ali Ahmad Abdul-Mehsen (2001) Automatic scheduling of substation maintenance outages. Masters thesis, King Fahd University of Petroleum and Minerals.

Al-Anazi, Dahham Matar (2001) Weibull reliability analysis and maintenance strategies of rotating equipment. Masters thesis, King Fahd University of Petroleum and Minerals.

Bin Mahfood, Ahmed Omer Saleh (2001) Parallel genetic scheduling for parallel applications. Masters thesis, King Fahd University of Petroleum and Minerals.

Bin Mahfooz, Mahfooz Saleh (2001) Reliability analysis of ATM network with error control. Masters thesis, King Fahd University of Petroleum and Minerals.

Fadol, Ahmed A. (2001) The Cognitive self-structuring connectionist machine. Masters thesis, King Fahd University of Petroleum and Minerals.

Fallatah, Gasem Mohammed (2001) Sulfide stress cracking of dissimilar metal welds. Masters thesis, King Fahd University of Petroleum and Minerals.

Al-Gahtani, Husain (2001) Dynamic response of fluid-loaded composite plates to stationary and moving loads. Masters thesis, King Fahd University of Petroleum and Minerals.

Al-Humaidi, Bader Ahmed (2001) Spline-wavelets in numerical solutions of differential equations. Masters thesis, King Fahd University of Petroleum and Minerals.

Hussain, Mohammed Mujtaba (2001) Investigation of heat and moisture transfer during solids drying. Masters thesis, King Fahd University of Petroleum and Minerals.

Ibrahim, Ahmed Esmat Mahmoud (2001) Learning continuous functions using decision tree learning algorithms. Masters thesis, King Fahd University of Petroleum and Minerals.

Al-Khalifa, Mohammad Ahmad Hasan (2001) Data integration in 3-D geostatistical porosity modeling of Hanifa Reservoir in Berri field, Saudi Arabia. Masters thesis, King Fahd University of Petroleum and Minerals.

Khene, Faouzi M. (2001) Fast wavelet transforms and seismic compression. PhD thesis, King Fahd University of Petroleum and Minerals.

Moinuddin, Muhammad (2001) Normalized time varying mixed norm LMS-LMF adaptive algorithm. Masters thesis, King Fahd University of Petroleum and Minerals.

Naeem, Wasif (2001) Nonlinear predictive control using genetic algorithms. Masters thesis, King Fahd University of Petroleum and Minerals.

El-Rayyes, Ali El-Said Hassan (2001) Study of the photochemical properties of some aromatic compounds on molecular sieves using a picosecond pulse laser system. PhD thesis, King Fahd University of Petroleum and Minerals.

Raza, Syed Arshad (2001) Visualization with spline using a genetic algorithm. Masters thesis, King Fahd University of Petroleum and Minerals.

Al-Shaikhi, Ali Ahmad Saleh (2001) Modified algorithms for the decoding of hamming product codes. Masters thesis, King Fahd University of Petroleum and Minerals.

Sheikh, Saifuddin (2001) Numerical simulation of one- and two-phase flows in unpacked and partially packed vessels. Masters thesis, King Fahd University of Petroleum and Minerals.

Suleiman, Oloriegbe Yahaya (2001) Theoretical potential scans and vibrational spectra of two rotors halomethyl isocyanates. Masters thesis, King Fahd University of Petroleum and Minerals.

Tijani, Jimoh (2001) Palladium-catalyzed regioselective carbonylative coupling of alkynes with aniline derivatives. Masters thesis, King Fahd University of Petroleum and Minerals.

Umar, Yunusa (2001) Characterization of catalytic materials containing zeolites using n-hexane cracking reaction. Masters thesis, King Fahd University of Petroleum and Minerals.

Wasiq, Muhammad (2001) Measuring class cohesion in object-oriented systems. Masters thesis, King Fahd University of Petroleum and Minerals.

Al-Zahrani, Abdul Aziz Mesaad Abdullah (2001) Assessment of factors affecting building maintenance management auditing in Saudi Arabia. Masters thesis, King Fahd University of Petroleum and Minerals.

Sultan, Mir Asif (2001) Application of neural network to the determination of well-test interpretation model for horizontal wells. Masters thesis, King Fahd University of Petroleum and Minerals.

Ather, Nadeem (2001) Null steering and pattern control in smart antenna arrays. Masters thesis, King Fahd University of Petroleum and Minerals.

Seliaman, Mohamed Elhassan (2001) A Simulation model for the shuttle bus traffic during Nafrah period. Masters thesis, King Fahd University of Petroleum and Minerals.

Khan, Muhammad Ajmal (2001) Analysis of metal-clad TM-pass polarizers using the method of lines. Masters thesis, King Fahd University of Petroleum and Minerals.

Mohammad, Osman El Hussien (2001) Effect of gradation and testing procedures on the load carrying capacity of calcareous sediments. Masters thesis, King Fahd University of Petroleum and Minerals.

Shah, Syed Faisal Ali (2001) Performance evaluation of Rake receiver with adaptive channel estimation for IMT-DS system. Masters thesis, King Fahd University of Petroleum and Minerals.

Siddiqui, Atiq (2001) TARGETING IN MULTI-CLASS SCREENING UNDER ERROR AND ERROR-FREE MEASUREMENT SYSTEMS. Masters thesis, KFUPM.

Adeleke, Adeyinka Hakeem (2001) Effect of intermetallic phases on corrosion of Aluminum-Silicon Carbide (Al-SiCp) composites. Masters thesis, King Fahd University of Petroleum and Minerals.

Baig, Mirza Mansoor (2001) Safety assessment of industrial construction projects in Saudi Arabia. Masters thesis, King Fahd University of Petroleum and Minerals.

Humoud, Abdrabbalamir Abdallah (2001) A New dewpoint pressure correlation for gas-condensate systems. Masters thesis, King Fahd University of Petroleum and Minerals.

Khan, Junaid Asim (2001) Performance driven, low-power, standard VLSI cell placement using simulated evolution. Masters thesis, King Fahd University of Petroleum and Minerals.

Khan, Murtaza Ali (2001) An efficient font design method. Masters thesis, King Fahd University of Petroleum and Minerals.

Al-Mathami, Abdul Aziz (2001) A Study of corrosion control of mild steel using inhibitors under atmospheric conditions. Masters thesis, King Fahd University of Petroleum and Minerals.

Sharaf-al-Islam, Abdul-Baqi Muhammad (2001) An Object-oriented model for semantic analysis of natural languages. Masters thesis, King Fahd University of Petroleum and Minerals.

Al-Subai, Khaled Othman (2001) Compositional gradient calculations for a Saudi Arabian gas condensate reservoir. Masters thesis, King Fahd University of Petroleum and Minerals.

Siddiqui, Atiq Waliullah (2001) Targeting in multi-class screening under error and error-free measurement systems. Masters thesis, King Fahd University of Petroleum and Minerals.

Mohammad, Osman El Hussien (2001) Effect of gradation and testing procedures on the load carrying capacity of calcareous sediments. Masters thesis, KFUPM.

Mohib, Khuram Razzak (2001) Plasto-damage model for stress-strain behavior of soil. Masters thesis, KFUPM.

Moied, Khurram (2001) Locating optimum water quality monitoring stations in water distribution networks, using genetic algorithm. Masters thesis, KFUPM.

Fedjki, Chawki A. (2000) On the quadratic assignment problem and its extensions. PhD thesis, King Fahd University of Petroleum and Minerals.

Irfan-ul-Haq, Muhammad (2000) Crack propagation in CPVC at different temperatures. Masters thesis, King Fahd University of Petroleum and Minerals.

Khan, Rehan Ikram (2000) Effect of temperature on the fatigue behavior of plain weave woven carbon fabric-reinforced composite plastic. Masters thesis, King Fahd University of Petroleum and Minerals.

Al-Mutairi, Musaad Ali (2000) Heat and mass transfer analysis of liquid desiccant-air contact system in a gauze-type structured packing tower. Masters thesis, King Fahd University of Petroleum and Minerals.

Al-Taq, Ali Abdullah (2000) Synthesis and study of corrosion inhibiting activity of several 1, 12-dodacanediamine derivatives. Masters thesis, King Fahd University of Petroleum and Minerals.

Al-Mehdar, Omar Salem (2000) Error detection in algorithm-based fault tolerant systems. Masters thesis, King Fahd University of Petroleum and Minerals.

Baroudi, Uthman (2000) Performance of Adaptive Admission/Congestion Control Policies on a Hybrid MC-CDMA/TDMA Integrated Multimedia Networks. PhD thesis, Concordia Univesrity.

Al-Mulhim, Khalid Abdulaziz Abdullah (2000) Transient temperature distibution in a tubesheet of a fixed tubesheet heat exchanger. Masters thesis, King Fahd University of Petroleum and Minerals.

Alvi, Faisal (2000) Generalization of formal concept analysis to fuzzy contexts: application for knowledge extraction. Masters thesis, King Fahd University of Petroleum and Minerals.

Bashir, Rashid (2000) Analysis and design of buried pipelines. Masters thesis, King Fahd University of Petroleum and Minerals.

Khurrum, Mian Zainulabadin (2000) An improved fractionally spaced decision feedback equalizer structure. Masters thesis, King Fahd University of Petroleum and Minerals.

Mahmood, Kashif (2000) Decision feedback equalization using hybrid lattice-neural network structures. Masters thesis, King Fahd University of Petroleum and Minerals.

Al-Dubaisi, Abdulghafoor Habib (2000) Change orders in construction projects in Saudi Arabia. Masters thesis, King Fahd University of Petroleum and Minerals.

Khan, Faiz Mohammed (2000) Performance evaluation of concrete coatings. Masters thesis, King Fahd University of Petroleum and Minerals.

Siddiqi, Zaki Uddin. (2000) Effects of geotextiles on the load-carrying capacity of pavements on Sabkha. Masters thesis, King Fahd University of Petroleum and Minerals.

Abdulqader, Mohammed Rafiq Mohammed (2000) Modeling and control of stand-alone and parallel operating diesel generators. Masters thesis, King Fahd University of Petroleum and Minerals.

Abidogun, Kamorudeen Babatunde. (2000) An experimental investigation of stall characteristics in a vaneless diffuser. PhD thesis, King Fahd University of Petroleum and Minerals.

Abrar, Shafayat (2000) Neural network based nonlinear blind equalization schmes for high order M-ary QAM signals. Masters thesis, King Fahd University of Petroleum and Minerals.

Adewusi, Surajudeen Adedotun (2000) Detection of a transverse crack in a rotating shaft using wavelet transform. Masters thesis, King Fahd University of Petroleum and Minerals.

Al-Ahdab, Ameen Abdulra'ouf (2000) Synthesis and application of acrylamide based multi-block copolymers in separation of proteins. Masters thesis, King Fahd University of Petroleum and Minerals.

Balah, Mohamed (2000) Analysis of laminated general shells undergoing finite rotations and large motion. PhD thesis, King Fahd University of Petroleum and Minerals.

Elleithy, Wael Mohammed Ali (2000) Iterative coupling of boundary and finite element methods. PhD thesis, King Fahd University of Petroleum and Minerals.

Al-Juhani, Abdulhadi Abdullah (2000) Modeling and simulation of a combined isomerizaion reactor/pressures swing adsorption unit. Masters thesis, King Fahd University of Petroleum and Minerals.

Khan, Mousa Mudhaffar Khan Mousa (2000) Assessment of safety measures in the design of residential buildings in Saudi Arabia. Masters thesis, King Fahd University of Petroleum and Minerals.

Khan, Raza Ahmed (2000) Assessment of HVAC systems design and operation for indoor air quality in Saudi Arabia. Masters thesis, King Fahd University of Petroleum and Minerals.

Al Mandeel, Shawqi Juma (2000) Behavior of laterally loaded pile group model in sand. Masters thesis, King Fahd University of Petroleum and Minerals.

Khan, Mehmood (2000) Optimal repeat inspection plan with several classifications. Masters thesis, King Fahd University of Petroleum and Minerals.

Majid, Shaikh Hasibul (2000) Minority carrier injection in epitaxial schottky barrier diodes. Masters thesis, King Fahd University of Petroleum and Minerals.

Al-Marzoug, Ahmed Mohammed (2000) Acoustic wavefield in an inhomogeneous ocean. PhD thesis, King Fahd University of Petroleum and Minerals.

Mohammad, Mohammad Ahmad (2000) Acoustic and resistivity studies of the Khobar Member, the Dammam Formation, Eastern Province, Saudi Arabia. Masters thesis, King Fahd University of Petroleum and Minerals.

Al-Saadi, Abdulaziz Abdulrahman (2000) Computational study of conformational behavior and analyses of vibrational spectra of some ketenes. Masters thesis, King Fahd University of Petroleum and Minerals.

Refai, Jubran Ali Ahmed (2000) A Modified nodal formulation parametric sensitivities for power system analysis. Masters thesis, King Fahd University of Petroleum and Minerals.

Selmi, Hazem Helmi (2000) A Hybrid error control scheme for ATM networks. Masters thesis, King Fahd University of Petroleum and Minerals.

Siddiqui, Junaid Abdul Wahid (2000) The Interaction between soil and buried bent pipelines. Masters thesis, King Fahd University of Petroleum and Minerals.

Sullyman, Ahmed Iyanda (2000) Echo cancellation using a variable step-size NLMS algorithm. Masters thesis, King Fahd University of Petroleum and Minerals.

Akram, Muhammad Nadeem (2000) Analysis of anti-resonant reflecting optical waveguide grating using the method of lines. Masters thesis, King Fahd University of Petroleum and Minerals.

Hamid, Jalal (2000) Application of pulse-decay technique to characterize whole cores. Masters thesis, King Fahd University of Petroleum and Minerals.

Hossain, Mohammad Mozahar (2000) Experimental investigation of hydrogen spillover on Co-Clay hydrotreating catalysts by noble metals. Masters thesis, King Fahd University of Petroleum and Minerals.

Ilyas, Irfan Ahmed (2000) A java based load balancing framework for network parallel applications. Masters thesis, King Fahd University of Petroleum and Minerals.

Khan, Muhammad Noman (2000) Incorporating the effects of gas slippage and non-darcy flow in the measurement of permeability using pressure pulse decay technique. Masters thesis, King Fahd University of Petroleum and Minerals.

Zaheer, Noman (2000) Project/process simulation modeling using discrete event construction simulation language stroboscope. Masters thesis, King Fahd University of Petroleum and Minerals.

Al-Shalan, Furaih Fayiz (2000) Performance of quadrature amplitude modulation in Nakagami fading channels with diversity. Masters thesis, King Fahd University of Petroleum and Minerals.

Amjad, Meerja Khalim (2000) Null-steering in planar arrays by phase perturbations using genetic algorithms. Masters thesis, King Fahd University of Petroleum and Minerals.

Hashmi, Syed Shariq (2000) Effect of a hydraulic fracture on the performance of a layered gas condensate reservoir. Masters thesis, King Fahd University of Petroleum and Minerals.

Al-Abdulhadi, Abdullatif Ibrahim (2000) Protective effects of substituted 1 (Benzyl) 1-H- 1,2,3 triazole compounds on the dissolution of iron in HCI solution. Masters thesis, King Fahd University of Petroleum and Minerals.

Abu-Shal, Yahya Abdul-Rahman Saleh (2000) Onset voltage of corona on coated conductors. Masters thesis, King Fahd University of Petroleum and Minerals.

Ahmed, Syed Zaka (2000) Cyclopolymerization of unsaturated quaternary piperazinium compounds. Masters thesis, King Fahd University of Petroleum and Minerals.

Al-Gahtani, Ahmad Saad (2000) An Investigation of corrosion of steel reinforcement in concrete in the Eastern Province of Saudi Arabia. Masters thesis, King Fahd University of Petroleum and Minerals.

Aliyu, Mohammad Dikko S. (2000) Efficient algorithm for collision detection and path planning for robotics application. Masters thesis, King Fahd University of Petroleum and Minerals.

Chowdhury, Mohammad Hassan Murad (2000) Modeling of a nonisothermal tubular reactor packed with immobilized enzyme systems. Masters thesis, King Fahd University of Petroleum and Minerals.

Hammawa, Hassan (2000) Mixture models for dense fluids and polymers. Masters thesis, King Fahd University of Petroleum and Minerals.

Ijaz, Waseem (2000) A study of protein partinioning in two phase aqueous solutions of random and multi-block capolymers. Masters thesis, King Fahd University of Petroleum and Minerals.

Al-Jaroudi, Said Salman (2000) Study of the Stereochemical and reactivity phenomena of the addition reaction of 8-membered cyclic nitrone by NMR spectroscopy. Masters thesis, King Fahd University of Petroleum and Minerals.

Al-Khadhrawi, Mohammad Radhi (2000) A Geochemical investigation of a suite of Central Arabian crude oils. Masters thesis, King Fahd University of Petroleum and Minerals.

Al-Khattaf, Sulaiman Salih (2000) The effect of unit cell size on the activity and selectivity of FCC catalysts. Masters thesis, King Fahd University of Petroleum and Minerals.

Koken, Mustafa Emrah (2000) Differential electrolytic potentiometric detector in flow injection analysis. Masters thesis, King Fahd University of Petroleum and Minerals.

Memon, Muhammed Atif (2000) A system for prototyping optical architectures. Masters thesis, King Fahd University of Petroleum and Minerals.

Al-Najjar, Mohammed Mustafa (2000) Hydrogen bonding in polymer blends: effect on glass transition temperature. Masters thesis, King Fahd University of Petroleum and Minerals.

El-Mubarak, Aarif Hassan (2000) High performance liquid chromatographic separation of some psychotherapeutic benzodiazepines with chemometrical optimization. Masters thesis, King Fahd University of Petroleum and Minerals.

Naqvi, Mohammad Salman Mahmoud (2000) Modeling of hydrodynamics and mass transfer in cocurrent packed columns. Masters thesis, King Fahd University of Petroleum and Minerals.

Osagie, Ekhator Emmanuel (2000) Modeling of adsorption-reaction phenomena on activated carbon. Masters thesis, King Fahd University of Petroleum and Minerals.

Sani, Abu Mohammed A. (2000) Ethylene oligomerization to olefins on supported nickel catalyst. Masters thesis, King Fahd University of Petroleum and Minerals.

Al-Tawfiq, Ali Muhammad (2000) Thermodynamics of solution by gas liquid chromatography of nonmesomorphic solutes in the isotropic and nematic phases of liquid crystalline solvents. Masters thesis, King Fahd University of Petroleum and Minerals.

Sheikh, Mohammad Arshad (2000) Bulk separation of binary gas mixtures by pressure swing adsorption. Masters thesis, King Fahd University of Petroleum and Minerals.

Zaman, Ansar (2000) Development and analysis of transient models for the biofiltration of single and mixed volatile organic compounds. Masters thesis, King Fahd University of Petroleum and Minerals.

Al Mandeel, Shawqi Juma (2000) Behavior of laterally loaded pile group model in sand. Masters thesis, KFUPM.

Siddiqi, Zaki Uddin (2000) Effects of geotextiles on the load-carrying capacity of pavements on Sabkha. Masters thesis, KFUPM.

civil, civil (2000) The Interaction between soil and buried bent pipelines. Masters thesis, KFUPM.

Balah, Mohamed (2000) Analysis of laminated general shells undergoing finite rotations and large motion. PhD thesis, KFUPM.

Beshr, Hamoud Abdulrab Mohamed (2000) Durability of high performance concrete. PhD thesis, KFUPM.

Elleithy, Wael Mohammed Ali (2000) Iterative coupling of boundary and finite element methods. PhD thesis, KFUPM.

Khan, Asad-ur-Rehman (2000) Elasto-damage fatigue modeling of RC beams strengthened by CFRP. PhD thesis, KFUPM.

Bashir, Rashid (2000) Analysis and design of buried pipelines. Masters thesis, KFUPM.

Khan, Faiz Mohammed (2000) Performance evaluation of concrete coatings. Masters thesis, KFUPM.

Babalola, Lameed Olabode (1999) Depositional environments and provenance of the Wajid Sandstone, Abha-Khamis Mushayt area, Southwestern Saudi Arabia. Masters thesis, King Fahd University of Petroleum and Minerals.

Al-Darweesh, Ali S. (1999) Measuring the effectiveness of materials management for industrial construction projects in Saudi Arabia. Masters thesis, King Fahd University of Petroleum and Minerals.

Elish, Mahmoud Omar (1999) Measuring inheritance coupling in object-oriented systems. Masters thesis, King Fahd University of Petroleum and Minerals.

Fawumi, Olalekan Kayode (1999) Effect of liquid rop-out on the productivity of a rich gas condensate reservoir. Masters thesis, King Fahd University of Petroleum and Minerals.

Khan, Salman Ahmad (1999) Topology design of enterprise networks. Masters thesis, King Fahd University of Petroleum and Minerals.

Khan, Shafique Mohammad Ahmed. (1999) Investigation of mixed mode crack initiation angles under different loading conditions. Masters thesis, King Fahd University of Petroleum and Minerals.

Mahmood, Faisal (1999) Transient response of varying thickness timoshenko beam under point load. Masters thesis, King Fahd University of Petroleum and Minerals.

Melaiye, Abdulkareem Modupe (1999) Characterization of molecular sieves by n-Hexane cracking. Masters thesis, King Fahd University of Petroleum and Minerals.

Salem, Ahmad Fathi Abdallah (1999) Free energy surface an scaling in High-T c superconductors. Masters thesis, King Fahd University of Petroleum and Minerals.

Shaibu, Abdul-Baasit (1999) Parameter estimation using median ranked set sampling. Masters thesis, King Fahd University of Petroleum and Minerals.

Zummo, Salam Adel Hassan (1999) Performance and design of space-time trellis codes for wireless channels. Masters thesis, King Fahd University of Petroleum and Minerals.

Al-Muhareb, Mohammed Ahmed (1999) Improving standstone matrix stimulation for oil wells by gas preconditioning. Masters thesis, King Fahd University of Petroleum and Minerals.

Al-Saba, Tawfiq Taher Ali (1999) Transmission expansion planning using artificial intelligent tools. Masters thesis, King Fahd University of Petroleum and Minerals.

Al-Ghamdi, Abdullah M.A. (1999) An overview of the construction industry in the Kingdom of Saudi Arabia, 1390AH-1415AH (1970-1995). Masters thesis, King Fahd University of Petroleum and Minerals.

Al-Mutairi, Eid Musaad H. (1999) Modeling and simulation of a downer-type fluid catalytic cracking unit. Masters thesis, King Fahd University of Petroleum and Minerals.

Ali, Syed Muhammad (1999) Interface frictional characteristics of non-woven geotextile - Sabkha and - sand using pull-out tests. Masters thesis, King Fahd University of Petroleum and Minerals.

Al-Habib, Fathi Hussain Muhammad (1999) The effect of aging on the fatigue strength of alloy 800HT. Masters thesis, King Fahd University of Petroleum and Minerals.

Al-Salamah, Muhammad Fahad Sulaiman (1999) Solution methods for the economic dispatch problem and some of its variants. Masters thesis, King Fahd University of Petroleum and Minerals.

Bashir, Adamu (1999) Catalytic chain transfer polymerization of methacrylates and styrene. Masters thesis, King Fahd University of Petroleum and Minerals.

Bahaidarah, Haitham M.S (1999) Design and performance evaluation of evaporative cooling towers. Masters thesis, King Fahd University of Petroleum and Minerals.

Al-Humaidi, Abdulaziz Ahmad (1999) The Inverse problem of the calculus of variations: an operator-theoritic study. Masters thesis, King Fahd University of Petroleum and Minerals.

Haider, Saiyet Aijaz (1999) Conjugate forced convection heat transfer in eccentric annuli. Masters thesis, King Fahd University of Petroleum and Minerals.

Hasan, Syed Sajid (1999) Effect of formation damage on horizontal well performance. Masters thesis, King Fahd University of Petroleum and Minerals.

Iddris, Abukari (1999) Spontaneous ignition characteristics of a super-light oil. Masters thesis, King Fahd University of Petroleum and Minerals.

Kazi, Izzat Wajih (1999) Differential electrolytic potentiometric detector in flow injection analysis and in micro titration. Masters thesis, King Fahd University of Petroleum and Minerals.

Al-Mohammad, Ali Hasan Yasin (1999) Optimal capacitor placement in distribution systems using heuristic techniques. Masters thesis, King Fahd University of Petroleum and Minerals.

Mugaibel, Ali Hussain Abdallah (1999) Performance of turbo codes under designed interleaving and puncturing conditions. Masters thesis, King Fahd University of Petroleum and Minerals.

Nazeeruddin, Mohammad (1999) Robust congestion control for ATM's ABR service and design of a datalink layer interface library. Masters thesis, King Fahd University of Petroleum and Minerals.

Al-Saggaf, Hamed Abdallah (1999) Measuring quality in the service industry. Masters thesis, King Fahd University of Petroleum and Minerals.

Al-Yamani, Ahmad Abdul-Jabbar (1999) A Parallel Tabu search algorithm for VLSI standard cell placement. Masters thesis, King Fahd University of Petroleum and Minerals.

Shafi, Ahmar (1999) Neural networks-based decision feedback equalization using lattice structure. Masters thesis, King Fahd University of Petroleum and Minerals.

Al-Garni, Abdullah Mohammed (1999) Wind tunnel testing of an airfoil with a moving surface boundary-layer control. Masters thesis, King Fahd University of Petroleum and Minerals.

Al-Zayer, Ramzy M (1999) Stochastic model for love wave propagation in an inhomogeneous layer. Masters thesis, King Fahd University of Petroleum and Minerals.

Al-Ajmi, Khaled Husain (1999) Parameter estimation in Wiener-Hammerstein models. Masters thesis, King Fahd University of Petroleum and Minerals.

Al-Hussain, Khaleel Ma'tuq (1999) Torsional vibrations analysis of a synchronous motor-compressor drive train. Masters thesis, King Fahd University of Petroleum and Minerals.

Abul, Bashar (1999) On the performance of turbo codes over Rayleigh fading channels. Masters thesis, King Fahd University of Petroleum and Minerals.

Bu-Khamsin, Mohamed Ali Saleh (1999) Safety performance measuremnts: a PC-basd evaluation tool for industrial contractors in Saudi Arabia. Masters thesis, King Fahd University of Petroleum and Minerals.

Ali, Syed Muhammad (1999) Interface frictional characteristics of non-woven geotextile - Sabkha and - sand using pull-out tests. Masters thesis, KFUPM.

Ali, Mohammed Rizwan (1999) Analysis of static and dynamic characteristics of twin-cell steel box girders. Masters thesis, KFUPM.

civil, civil (1999) Simulation and assessment of concrete repair systems. PhD thesis, KFUPM.

Gutub, Adnan (1998) Hardware Model of an Expandable RSA Cryptographic System. Masters thesis, King Fahd University of Petroleum and Minerals (KFUPM).

Gutub, Adnan (1998) A Hardware Model of an Expandable RSA Cryptogrsphic System. Masters thesis, King Fahd University of Petroleum and Minerals (KFUPM).

Omar, Sayed (1998) Some properties of bicyclic extensions. Masters thesis, King Fahd University of Petroleum and Minerals.

Shaalan, Ali Mohamed Kamel Ali (1998) Continuum damage model for compressive fatigue of high strength concrete. Masters thesis, King Fahd University of Petroleum and Minerals.

Akhtar, Sohail (1998) Identification and classification of helicopters using neural nets. Masters thesis, King Fahd University of Petroleum and Minerals.

Al-Amer, Samir Hasan Husain (1998) New algorithms for H-norm approximation and applications. PhD thesis, King Fahd University of Petroleum and Minerals.

Al-Baiyat, Abdulkhaleg Ali (1998) Bayesian prediction for the multiple linear regression model with first order auto-correlation. Masters thesis, King Fahd University of Petroleum and Minerals.

Ali, Mir Mukkaram (1998) Synthesis, solution properties and NMR spectroscopy of some polybetaines. Masters thesis, King Fahd University of Petroleum and Minerals.

Arifusalam, Shaikh (1998) Robust networks modeling and scheduling. Masters thesis, King Fahd University of Petroleum and Minerals.

Al-Besher, Mubarak Faraj Saeed. (1998) A Conceptual model for consultant selection in Saudi Arabia. Masters thesis, King Fahd University of Petroleum and Minerals.

Al-Dawood, Ali Mohammad (1998) Effects of blending MTBE, methanol, or ethanol with gasoline on performance and exhaust emissions of SI engines. Masters thesis, King Fahd University of Petroleum and Minerals.

Al-Haj, Aiman Hassan M. (1998) Harmonic analysis of no-load current in distribution transformers. Masters thesis, King Fahd University of Petroleum and Minerals.

Chowdhury, Mohammad Sharif (1998) Two improved lossless image compression methods. Masters thesis, King Fahd University of Petroleum and Minerals.

Al-Gunaiyan, Khalid A. (1998) Assesment of the geotechnical properties of stabilized sand-marl mixtures for constructional purposes. Masters thesis, King Fahd University of Petroleum and Minerals.

Al-Haj, Aiman Hassan M. (1998) Harmonic analysis of no-load current in distribution transformers. Masters thesis, King Fahd University of Petroleum and Minerals.

Grami, Nayyar (1998) Capacity of slotted ALOHA under Nakagami fading. Masters thesis, King Fahd University of Petroleum and Minerals.

Gutub, Adnan Abdul-Aziz M.S. (1998) A Hardware model of an expandable RSA cryptographic system. Masters thesis, King Fahd University of Petroleum and Minerals.

Hussain, Ali Syed (1998) Fuzzy simulated evolution algorithm for VLSI cell placement. Masters thesis, King Fahd University of Petroleum and Minerals.

Al-Jaroudi, Alireda A. (1998) Computerized multiple criteria decision making model for projects planning and implementation. Masters thesis, King Fahd University of Petroleum and Minerals.

Al-Juaid, Mohammad Saud (1998) Design of variable gain transimpedance preamplifier. Masters thesis, King Fahd University of Petroleum and Minerals.

Al-Majed, Mohammed Hassan Yousef (1998) Priority-rating of public building maintenance work in Saudi Arabia. Masters thesis, King Fahd University of Petroleum and Minerals.

Khan, Irfan Sami (1998) Investigation of horizontal well performance using Hele-Shaw model. Masters thesis, King Fahd University of Petroleum and Minerals.

Khan, Mohammad Imran (1998) Performance optimization and modeling of slurry seal and micro surfacing utilizing steel slag aggregates. Masters thesis, King Fahd University of Petroleum and Minerals.

Khateeb, ur Rehman (1998) Distorted wave born approximation calculation of differential cross section of 14N(d,a)12C reaction below 1.3 MeV deuteron energies. Masters thesis, King Fahd University of Petroleum and Minerals.

Mahsood, Abdur-Rauf (1998) Quality changes of secondary effluent as it passes through amended sand column. Masters thesis, King Fahd University of Petroleum and Minerals.

Al-Qallaf, Mohammed S. (1998) Investigation of transient heat transfer in a rectangular packed duct with asymmetric heating. Masters thesis, King Fahd University of Petroleum and Minerals.

Al-Regib, Ghassan Ibrahim (1998) Selective encryption techniques for secure transmission of MPEG video bit-streams. Masters thesis, King Fahd University of Petroleum and Minerals.

Al-Sharif, Maher Mohammed Mahmoud (1998) Fault characterization and testability considerations in multi-valued logic circuits. Masters thesis, King Fahd University of Petroleum and Minerals.

Pasha, Mohammed Jahangir (1998) Null steering in partially adaptive arrays using genetic algorithms. Masters thesis, King Fahd University of Petroleum and Minerals.

Raza, Muhammad Kamran (1998) Some quality and reliability aspcts of aluminium extrusion process. Masters thesis, King Fahd University of Petroleum and Minerals.

Al-Zubaidi, Tariq S. (1998) Building a framework for coupling measurement systems. Masters thesis, King Fahd University of Petroleum and Minerals.

Adinoyi, Abdulkareem Bala (1998) Performance evaluation of I-Q trellis codes over frequency-selective fading channels. Masters thesis, King Fahd University of Petroleum and Minerals.

Enaya, Fuad Mohammed Fayez (1998) Magnetic and scaling properties of Yba2Cu408 high-temperature superconductor. Masters thesis, King Fahd University of Petroleum and Minerals.

Quddus, Azhar (1998) Curvature analysis using multiresolution techniques. PhD thesis, King Fahd University of Petroleum and Minerals.

Ahmed, Osama Abdl-Wahhab (1998) New joint time-frequency transforms with improved properties. PhD thesis, King Fahd University of Petroleum and Minerals.

Zahra, Mounir M. (1998) Optimization of mixed CMOS/BiCMOS circuits using tabu search. Masters thesis, King Fahd University of Petroleum and Minerals.

Al-Faraj, Shaker Ali Ahmed. (1998) Reservoir formation facies identification using decision tree learning. Masters thesis, King Fahd University of Petroleum and Minerals.

El-Boghdadi, Mahmoud Hassan (1998) Elastic plastic analysis of semi-rigid industrial frames. PhD thesis, King Fahd University of Petroleum and Minerals.

Al-Ghamdi, Saleh Abdallah (1998) Development of mechanical works' assembly cost data model for residential buildings in Saudi Arabia. Masters thesis, King Fahd University of Petroleum and Minerals.

Iqbal, Mohammad Owais (1998) Numerical investigation of pulsating flows in abrupt expansion pipes. Masters thesis, King Fahd University of Petroleum and Minerals.

Al-Kharobi, Talal Mousa Mohammed. (1998) Fuzzy logic based FPGA routing. Masters thesis, King Fahd University of Petroleum and Minerals.

Al-Muhammadi, Sultan Ahmad Muhammad (1998) New single asymmetric error correcting codes. Masters thesis, King Fahd University of Petroleum and Minerals.

Nuruzzaman, Mohammad. (1998) Null steering in planar antenna arrays using genetic algorithms. Masters thesis, King Fahd University of Petroleum and Minerals.

Al-Turabi, Mohamed Omer Hamed. (1998) EPR study on vanadium model compounds containing nitrogen and sulfur heteroatoms. PhD thesis, King Fahd University of Petroleum and Minerals.

Shajee, Mir Ahmed Ali (1998) Improved quantization of DCT based compression algorithms for video teleconferencing applications. Masters thesis, King Fahd University of Petroleum and Minerals.

Abdel Jalil, Pasl Abdel-Hamid (1998) Design and construction of a liquid incinerator; a novel method for fast chemical measurements and feedback control. PhD thesis, King Fahd University of Petroleum and Minerals.

Al-Hashim, Ghaleb A. (1998) Design and analysis of a high-performance fault-tolerant ATM network. Masters thesis, King Fahd University of Petroleum and Minerals.

Khodja, Mohamed-Rabigh. (1998) Radiative and nonleptonic decays of bottom baryons in the quark model. Masters thesis, King Fahd University of Petroleum and Minerals.

Magrabi, Syed Tariq (1998) Cancellation of grating lobes in scanned linear antenna arrays using genetic algorithm. Masters thesis, King Fahd University of Petroleum and Minerals.

Mahfouz, Fathi Mohammed Abd Al-Azim (1998) Heat convection from an oscillating cylinder. PhD thesis, King Fahd University of Petroleum and Minerals.

Al-Muhiameed, Zeid Ibrahim Abdallah (1998) Some acoustic wave problems in an inhomogeneous ocean. Masters thesis, King Fahd University of Petroleum and Minerals.

Mukarram, Shaik Khasimul (1998) Variable structure control of nonlinear systems. Masters thesis, King Fahd University of Petroleum and Minerals.

Negm, Aboubakr Ahmed Ali. (1998) Conjugate natural convection heat transfer in vertical coconcentric annuli. Masters thesis, King Fahd University of Petroleum and Minerals.

Parvez, Shahid (1998) Investigation of speech coding algorithms for voice communication through personal computers. Masters thesis, King Fahd University of Petroleum and Minerals.

Tasadduq, Noman Ali. (1998) The Transliner current controlled conveyor and its applications. Masters thesis, King Fahd University of Petroleum and Minerals.

Khan, Khaqan (1998) Fracture toughness investigation of an indigenous limestone rock formation. Masters thesis, King Fahd University of Petroleum and Minerals.

Rasheed, Asif (1998) Synthesis and solution properties of polymeric zwitterionic ammonium betains. Masters thesis, King Fahd University of Petroleum and Minerals.

Al-Shammari, Khalid Abdul-Aziz Holayan (1998) An annulus approach to fuzzy subgroups. Masters thesis, King Fahd University of Petroleum and Minerals.

Abu-Azzah, Ezzat Omar abdullah. (1998) Localization and delocalization studies in one dimensional electronic disordered systems. Masters thesis, King Fahd University of Petroleum and Minerals.

Ghouseuddin, Mohammed (1998) A virtual distributed computing system. Masters thesis, King Fahd University of Petroleum and Minerals.

Shareef, Mohammed Mujtaba (1998) Multiobjective water resources planning under demand, supply and quality uncertainties. Masters thesis, King Fahd University of Petroleum and Minerals.

Al-Kaltham, Ibrahim Abdul-Rahman (1998) Evaluation and comparison of Ingternet firewalls. Masters thesis, King Fahd University of Petroleum and Minerals.

Al-Gunaiyan, Khalid A. (1998) Assesment of the geotechnical properties of stabilized sand-marl mixtures for constructional purposes. Masters thesis, KFUPM.

Khan, Khaqan (1998) Fracture toughness investigation of an indigenous limestone rock formation. Masters thesis, KFUPM.

El-Boghdadi, Mahmoud Hassan (1998) Elastic plastic analysis of semi-rigid industrial frames. PhD thesis, KFUPM.

Mahsood, Abdur-Rauf (1998) Quality changes of secondary effluent as it passes through amended sand column. Masters thesis, KFUPM.

Shareef, Mohammed Mujtaba (1998) Multiobjective water resources planning under demand, supply and quality uncertainties. Masters thesis, KFUPM.

Khan, Mohammad Imran (1998) Performance optimization and modeling of slurry seal and micro surfacing utilizing steel slag aggregates. Masters thesis, KFUPM.

Shaalan, Ali Mohamed Kamel Ali (1998) Continuum damage model for compressive fatigue of high strength concrete. Masters thesis, KFUPM.

Ahmed, Abdul Rahim Nasir (1997) Integrated production, quality and maintenance models for multistage production-inventory systems. Masters thesis, King Fahd University of Petroleum and Minerals.

Ahmed, Adeeb (1997) Performance of biofilters under non-isothermal conditions. Masters thesis, King Fahd University of Petroleum and Minerals.

Al-Fawzan, Mohammad Abdulrahman (1997) Mathematical models for quality in multistage production systems. PhD thesis, King Fahd University of Petroleum and Minerals.

Farooq, Gulam (1997) Quality management practices among A/E organizations. Masters thesis, King Fahd University of Petroleum and Minerals.

Al-Gahtani, Abdallah M. (1997) Optimization of horizontal well completion : (position, length and perforation scenarios). Masters thesis, King Fahd University of Petroleum and Minerals.

Ghazi, Shoeb (1997) Equipment management policy of major construction contractors in the Eastern Province of Saudi Arabia. Masters thesis, King Fahd University of Petroleum and Minerals.

Hussain, Mohammed Aiyaz (1997) Object modeling with conic splines. Masters thesis, King Fahd University of Petroleum and Minerals.

Hussaini, Irfan Saif (1997) Performance evaluation of shell-and-tube heat exchangers: a numerical approach. Masters thesis, King Fahd University of Petroleum and Minerals.

Abu Al-Saud, Basem A. (1997) Convective heat transfer characteristics in the rectangular packed beds with asymmetric heating. Masters thesis, King Fahd University of Petroleum and Minerals.

Adiche, Hakim Salah. (1997) Fuzzy genetic algorithm for VLSI floorplan design. Masters thesis, King Fahd University of Petroleum and Minerals.

Bhatti, Umar Iqbal (1997) Fuzzy optimal control. Masters thesis, King Fahd University of Petroleum and Minerals.

Khan, Jameel Ur Rehman (1997) Design and performance evaluation of refrigeration systems using thermodynamic models. Masters thesis, King Fahd University of Petroleum and Minerals.

Riyaz, Sayyid Hasan. (1997) Neural observers for non-linear systems. Masters thesis, King Fahd University of Petroleum and Minerals.

Akremi, Ali (1997) Signaling traffic analysis of GSM authentication protocols. Masters thesis, King Fahd University of Petroleum and Minerals.

Al-Busaad, Sami Ahmad Khalid (1997) Assessment of application of life cycle cost on construction projects. Masters thesis, King Fahd University of Petroleum and Minerals.

Abu Sheikh, Abdel-Malek Ibrahim Mohammad. (1997) Developing behavioral models for driver gap acceptance at priority intersections. PhD thesis, King Fahd University of Petroleum and Minerals.

Bashir, Khalid (1997) Quantifying crude oil spill volume in homogeneous and layered porous media from product thickness in monitoring wells. Masters thesis, King Fahd University of Petroleum and Minerals.

Al-Daous, Mohammed Abdulmajeed. (1997) Zincosilicates with MFI-structure; synthesis, characterization, and catalytic evaluation. Masters thesis, King Fahd University of Petroleum and Minerals.

Al-Marhoun, Maher Ibraheem (1997) Application of multi-seismic attributes in estimating reservoir properties. Masters thesis, King Fahd University of Petroleum and Minerals.

Suhail, Mohammed Abdallah. (1997) Direct load control using programmable logic controller. Masters thesis, King Fahd University of Petroleum and Minerals.

Yusha'u, Balarabe (1997) Equational characterizations of cyclic purity and single compactness. Masters thesis, King Fahd University of Petroleum and Minerals.

Ghouti, Lahouari (1997) Higher-order statistics (HOS)-based deconvolution for ultrasonic nondestructive evaluation (NDE) of materials. Masters thesis, King Fahd University of Petroleum and Minerals.

Ramadhan, Rezqallah Hasan Fayyadh. (1997) Modeling of pavement condition and maintenance priority ranking for road networks. PhD thesis, King Fahd University of Petroleum and Minerals.

Abdulsamad, Mohammed (1997) A methodology for the optimization of rolling process. Masters thesis, King Fahd University of Petroleum and Minerals.

Abu-Haimed, Husam Saad (1997) Organization of parallel memories. Masters thesis, King Fahd University of Petroleum and Minerals.

Al-Amoudi, Waleed A. (1997) Assessment of safety level in performing building maintenance work in Saudi Arabia. Masters thesis, King Fahd University of Petroleum and Minerals.

Al-Awami, Luwai Hussain (1997) Model-based controller design for a continuous pulping reactor. Masters thesis, King Fahd University of Petroleum and Minerals.

Al-Baroudi, Wasim Mohamed Munther (1997) Digital filter design using LMI based techniques. Masters thesis, King Fahd University of Petroleum and Minerals.

Alqam, Mohammad Hassan. (1997) The Role of asphaltenes, resins and other solids in the stabilization of water in oil emulsions and its effect on oil production in Saudi oil fields. Masters thesis, King Fahd University of Petroleum and Minerals.

Basha, Shaik Mahaboob (1997) Design of 1-D and 2-D IIR digital filters using IRLS technique. Masters thesis, King Fahd University of Petroleum and Minerals.

Al Dajani, Mansour Abdulaziz (1997) Optimal control of nonlinear plants using artificial neural networks. Masters thesis, King Fahd University of Petroleum and Minerals.

Al-Faer, Shakir Nasir (1997) On the residual stress measurements in Y-based superconductor. Masters thesis, King Fahd University of Petroleum and Minerals.

Ghouti, Lahouari (1997) Higher-order statistics (HOS)-based deconvolution for ultrasonic nondestructive evaluation (NDE) of materials. Masters thesis, King Fahd University of Petroleum and Minerals.

Hakeem, Tarique (1997) Non-catalytic partial oxidation of sour natural gas. Masters thesis, King Fahd University of Petroleum and Minerals.

Hussain, Shaik Palur Akbar (1997) Role of sodium chloride in low temperaturs hot corrosion of superalloys. Masters thesis, King Fahd University of Petroleum and Minerals.

Al-Huwaidi, Mohammad H. (1997) An aid to similar-characteristics-code clustering. Masters thesis, King Fahd University of Petroleum and Minerals.

Hyder, Syed Jaleeluddin (1997) A Robust design methodology for structural control using piezoelectric materials. Masters thesis, King Fahd University of Petroleum and Minerals.

Al-Janabi, Yahya Taqui Ahmed. (1997) EPR investigations of anisotropic interaction and cole-davidson parameters, novel phospholipids, and newly synthesized buckminsterfullerenes using nitroxide spin probes. PhD thesis, King Fahd University of Petroleum and Minerals.

Al-Juwairah, Yaser Abdullah (1997) Factors affecting construction costs in Saudi Arabia. Masters thesis, King Fahd University of Petroleum and Minerals.

Al-Kaabi, Umar Dujain Ubaid (1997) Electron capture from hydrogenic systems by positrons and positive muons. Masters thesis, King Fahd University of Petroleum and Minerals.

Kaleemuddin, Mohammed. (1997) Evaluation of pipelined switch architectures for ATM networks. Masters thesis, King Fahd University of Petroleum and Minerals.

Maghrabi, Husain Tofig (1997) Linear-phase modified duobinary data transmission filter. Masters thesis, King Fahd University of Petroleum and Minerals.

Mantawy, Abdel-aal Hassan Ismail. (1997) Unit commitment by artificial intelligence techniques. PhD thesis, King Fahd University of Petroleum and Minerals.

Al-Naffouri, Tareq Yousef (1997) Adaptive filtering using the least-mean mixed-norms algorithm and its application to echo cancellation. Masters thesis, King Fahd University of Petroleum and Minerals.

Al-Naglah, Muammar Abdallah (1997) Second-law-based thermoeconomic analysis and optimization of thermal-energy-storage systems. Masters thesis, King Fahd University of Petroleum and Minerals.

Al-Nashmi, Muhammad Hasan Muhammad. (1997) The Effect of retarder on gelation time and stability of polyacrylamide chromium (III) gel system. Masters thesis, King Fahd University of Petroleum and Minerals.

Al-Nasser, Sadiq Hassan (1997) Measuring the coupling of imperative computer programs. Masters thesis, King Fahd University of Petroleum and Minerals.

Mohiuddin, Mohammed Ahmed (1997) Finite element dynamic analysis of multibody rotor-bearing system with cracked shaft. PhD thesis, King Fahd University of Petroleum and Minerals.

Al-Shahri, Mohammad Humoud (1997) Overhad costs in building construction in Saudi Arabia. Masters thesis, King Fahd University of Petroleum and Minerals.

Qidwai, Shaikh Uvais Ahmad (1997) Estimation and filtering of harmonics. Masters thesis, King Fahd University of Petroleum and Minerals.

Sadiq, Rehan (1997) Performance evaluation of slow sand filters: a probabilistic approach. Masters thesis, King Fahd University of Petroleum and Minerals.

Al-Taweel, Ahmed Baqer (1997) Development of multiphase flow metering set-up utilizing coriolis meters. Masters thesis, King Fahd University of Petroleum and Minerals.

Shaikh, Sohel. (1997) Solution behavior of hydrophobic non-ionic and ionic polymers. Masters thesis, King Fahd University of Petroleum and Minerals.

Shoaib, Muhammad (1997) Fuzzy logic controller for power system stability enhancement. Masters thesis, King Fahd University of Petroleum and Minerals.

Siddiqui, Fayyaz ahmed. (1997) Relationship between the noncompliance behavior at signalized intersection an driver characteristics. Masters thesis, King Fahd University of Petroleum and Minerals.

Al-Zaher, Husain Abdullah Ahmad (1997) The Four-terminal floating nullor (FTFN) and its applications. Masters thesis, King Fahd University of Petroleum and Minerals.

Al-Matar, Ali Abbas (1997) A Life cycle costing model for small reverse osmosis water treatment facilities. Masters thesis, King Fahd University of Petroleum and Minerals.

Parvez, Saleem (1997) A Study on the development of vehicular loding for design of highway bridges in Saudi Arabia. Masters thesis, King Fahd University of Petroleum and Minerals.

Rashid, Muhammad. (1997) Mathematical modeling and optimization of precipitation hardening of extrudable aluminium alloys. Masters thesis, King Fahd University of Petroleum and Minerals.

Salem, Yasser Abu-Bakr (1997) Generalised eigenvalue problem for tridiagonal symmetric interval matrices. Masters thesis, King Fahd University of Petroleum and Minerals.

Abido, Mohammed Ali (1997) Intelligent techniques approach to power systems identification and control. PhD thesis, King Fahd University of Petroleum and Minerals.

Hassan, Abbi Moghaiyera (1997) Optimal design of multicharacteristic inspection plan udner inspection errors and statistical dependency. Masters thesis, King Fahd University of Petroleum and Minerals.

Al-Shishtawi, Mohammad Shafique Ahmad (1997) Integrating heterogeneous database schemas using an on-line taxonomy: a methodology for creating a global schema. Masters thesis, King Fahd University of Petroleum and Minerals.

Tayyar, Haitham Fahmi Hassan (1997) A new model reduction scheme for linear time-invariant systems with polynomial. Masters thesis, King Fahd University of Petroleum and Minerals.

Al-Refai, Abdurrahman Saleh (1997) Surface roughness measurement using laser detection technique. Masters thesis, King Fahd University of Petroleum and Minerals.

Al-Gahtani, Mohammed Ali Mohammed. (1997) Current conveyor-based universal filter and oscillator. Masters thesis, King Fahd University of Petroleum and Minerals.

Iyaz, Shoukat (1997) Validation and improvement of rear-end traffic conflict model for safety evaluation of coordinated signal systems. Masters thesis, King Fahd University of Petroleum and Minerals.

Al-Lawati, Qasim Mohammed (1997) Real and reactive power wheeling cost based on the marginal cost theory. Masters thesis, King Fahd University of Petroleum and Minerals.

Khan, Amir Ali (1997) Fate of secondary effluent flow through porous media. Masters thesis, King Fahd University of Petroleum and Minerals.

Al-Qassab, Hesham Mohammad (1997) Geostatistical modeling of Safaniya reservoir in Safaniya field. Masters thesis, King Fahd University of Petroleum and Minerals.

Al-Ghamdi, Mohammed Abdullah Ali (1997) Quantitative determination of tetraalkyllead by lead-207 nuclear magnetic resonance. Masters thesis, King Fahd University of Petroleum and Minerals.

Al-Jarad, Talha M. (1997) Design and analysis of a fault-tolerant switch for B-ISDN. Masters thesis, King Fahd University of Petroleum and Minerals.

Mohdaly, Hani Mahmoud Mohamed Hasan (1997) Optimization of parabolic steel box arches. Masters thesis, King Fahd University of Petroleum and Minerals.

Al-Sawi, Ahmad Nour Al-Islam Ayoub. (1997) HCORDIC: a high-performance cordic algorithm. Masters thesis, King Fahd University of Petroleum and Minerals.

Abu Sheikh, Abdel-Malek Ibrahim Mohammad. (1997) Developing behavioral models for driver gap acceptance at priority intersections. PhD thesis, KFUPM.

Ahmad, Imtiaz (1997) Improvement of Eastern Saudi sabkha soils for road construction. Masters thesis, KFUPM.

Al-Ayedi, Eissa Shayei (1997) Chemical stabilization of Al-Qurrayyah Eastern Saudi Sabkha soil. Masters thesis, KFUPM.

Azam, Shahid (1997) Effect of gypsum-anhydrite on the behavior of expansive clays. Masters thesis, KFUPM.

Bagampadde, Umaru (1997) Optimization of steel slag aggregates for bituminous mixes in Saudi Arabia. Masters thesis, KFUPM.

Iyaz, Shoukat (1997) Validation and improvement of rear-end traffic conflict model for safety evaluation of coordinated signal systems. Masters thesis, KFUPM.

Parvez, Saleem (1997) A Study on the development of vehicular loding for design of highway bridges in Saudi Arabia. Masters thesis, KFUPM.

Ramadhan, Rezqallah Hasan Fayyadh. (1997) Modeling of pavement condition and maintenance priority ranking for road networks. PhD thesis, KFUPM.

Sadiq, Rehan (1997) Performance evaluation of slow sand filters: a probabilistic approach. Masters thesis, KFUPM.

Siddiqui, Fayyaz ahmed. (1997) Relationship between the noncompliance behavior at signalized intersection an driver characteristics. Masters thesis, KFUPM.

civil, civil (1997) Improvement of Eastern Saudi sabkha soils for road construction. Masters thesis, KFUPM.

Bashir, Khalid (1997) Quantifying crude oil spill volume in homogeneous and layered porous media from product thickness in monitoring wells. Masters thesis, KFUPM.

Imran, Syed Abdul Vakeel. (1997) Removal of microorganisms through slow sand filtration of chlorinated vs. nonchlorinated secondary effluents. Masters thesis, KFUPM.

Khan, Amir Ali (1997) Fate of secondary effluent flow through porous media. Masters thesis, KFUPM.

Saleem, Muhammad (1997) Microbial evaluation of Al-Khobar wastewater treatment plants. Masters thesis, KFUPM.

civil, civil (1997) Predicting short-duration, high-intensity rainfall in Saudi Arabia. Masters thesis, KFUPM.

Mohdaly, Hani Mahmoud Mohamed Hasan (1997) Optimization of parabolic steel box arches. Masters thesis, KFUPM.

Saleem, Muhammad (1997) Microbial evaluation of Al-Khobar wastewater treatment plants. Masters thesis, King Fahd University of Petroleum and Minerals.

Ahmed, Syed Younus (1997) Liquid desiccant and its application for pipeline drying. Masters thesis, King Fahd University of Petroleum and Minerals.

Al-Dini, Salem Ahmed. (1997) An experimental investigation for the effect of pulsation on heat transfer characteristics in pipes. Masters thesis, King Fahd University of Petroleum and Minerals.

Imran, Syed Abdul Vakeel. (1997) Removal of microorganisms through slow sand filtration of chlorinated vs. nonchlorinated secondary effluents. Masters thesis, King Fahd University of Petroleum and Minerals.

Al-Khalaf, Hassan Abdullah (1997) Predicting short-duration, high-intensity rainfall in Saudi Arabia. Masters thesis, King Fahd University of Petroleum and Minerals.

Abdallah, Ali Mohamoud (1996) The effect of pH and solvent on the photophysics of thymine. Masters thesis, King Fahd University of Petroleum and Minerals.

Abed, Sofian Mostafa (1996) Programmable current mirrors: design and applications. Masters thesis, King Fahd University of Petroleum and Minerals.

Ahmed, Mohammed Ather. (1996) A parsing algorithm for iconic visual programming languages. Masters thesis, King Fahd University of Petroleum and Minerals.

Ahmed, Eball Hifthy Abdul-Rahim (1996) Mixed convection from an elliptic tube placed in a fluctuating free stream. PhD thesis, King Fahd University of Petroleum and Minerals.

Al-Assar, Rajai Samih (1996) Unsteady hydrodynamic forces on spheroidal bodies. PhD thesis, King Fahd University of Petroleum and Minerals.

Al-Atiq, Tawfiq Hasan (1996) Contractors quality systems-assessment to the ISO 9000 standard. Masters thesis, King Fahd University of Petroleum and Minerals.

Al-Hajji, Ali Ahmed. (1996) Pressure transient behavior of a well in anisotropic reservoir intersected by multiple fractures. Masters thesis, King Fahd University of Petroleum and Minerals.

Al-Hakimi, Najib Mohammad (1996) A Study of rheology and interfacial activity of amphiphilic block copolymers for enhanced oil recovery. Masters thesis, King Fahd University of Petroleum and Minerals.

Hassan, Azfar. (1996) NMR study of nitrogen inversion and N-O bond rotation and anomeric effect in hydroxylamine derivatives. PhD thesis, King Fahd University of Petroleum and Minerals.

Jarad, Abdul-Rahman Mohammad (1996) Geostatistical evaluation of the Hazam al-Jalamid phosphorite deposit, Northwestern Saudi Arabia. Masters thesis, King Fahd University of Petroleum and Minerals.

Khan, Mohammed Mujeebullah. (1996) Proposed methodology for designing the signal change interval. Masters thesis, King Fahd University of Petroleum and Minerals.

Al-Mubaiyedh, Usamah Ahmed (1996) Bifurcation phenomena in non-isothermal reactive gas absorption. Masters thesis, King Fahd University of Petroleum and Minerals.

Moid, Mohammed Abdul (1996) Design of bandlimited, energy optimized data transmission filter. Masters thesis, King Fahd University of Petroleum and Minerals.

Nizam, Syed Mohtashim (1996) Performance evaluation of a new type of titanium nitride (TiN) coated twist drill. Masters thesis, King Fahd University of Petroleum and Minerals.

Al-Salem, Ali Ahmed Mohammed (1996) Geostatistical modeling of Arab-D reservoir, Harmaliyah field, Saudi Arabia. Masters thesis, King Fahd University of Petroleum and Minerals.

Sayeed, Azhar (1996) Reducing the complexity of rational cubics for designing the objects. Masters thesis, King Fahd University of Petroleum and Minerals.

Yousuf, Muhammad (1996) On the margin stability of interval matrices. Masters thesis, King Fahd University of Petroleum and Minerals.

Nadeem, Mohammad Mohsin (1996) Evolution based scheduling of precedence computations with communication costs. Masters thesis, King Fahd University of Petroleum and Minerals.

Khan, Adnan Ahmed. (1996) Development of a congestion control scheme for ATM networks. Masters thesis, King Fahd University of Petroleum and Minerals.

Akhtar, Muhammad Naseem (1996) 13C, 15N and 31P NMR study of the scrambling and the redox reactions of some gold(I) complexes. PhD thesis, King Fahd University of Petroleum and Minerals.

Desai, Nabeel Ibrahim (1996) Kinetic studies and methods of analysis of some compounds of analytical interest utilizing sequential injection analysis technique. Masters thesis, King Fahd University of Petroleum and Minerals.

Makhdoum, Mohammed Akram Abdulhai (1996) Integrated production, quality and maintenance models under various preventive maintenance policies. Masters thesis, King Fahd University of Petroleum and Minerals.

Islam, Mohammed Rafiqul (1996) Microcontroller based unity power factor convertor. Masters thesis, King Fahd University of Petroleum and Minerals.

Soleja, Faisal Mohammad Zafar (1996) Automated VHDL composition from AHPL. Masters thesis, King Fahd University of Petroleum and Minerals.

Al-Afandi, Muhammad Nauwar (1996) On learning better decision trees. Masters thesis, King Fahd University of Petroleum and Minerals.

Al-Ayedi, Eissa Shayei (1996) Chemical stabilization of Al-Qurrayyah Eastern Saudi Sabkha soil. Masters thesis, King Fahd University of Petroleum and Minerals.

Beg, Mansoor Ali (1996) Numerical modeling of RC slabs on tensionless elastic subgrade. Masters thesis, King Fahd University of Petroleum and Minerals.

Khan, Amir Amanullah (1996) An Ethernet bridge with packet filtering and statistics collection capabilities. Masters thesis, King Fahd University of Petroleum and Minerals.

Al-Mulhem, Ahmad Saleh Abdallah (1996) SELF-MAP: stochastic evolution LUT-FPGA technology mapper. Masters thesis, King Fahd University of Petroleum and Minerals.

Alsayed, Sabih Masarrat (1996) A new traffic control scheme for ATM networks. Masters thesis, King Fahd University of Petroleum and Minerals.

Shehab Eldeen, Tariq Abdul Basset Mohammed (1996) Budget estimating models for the construction cost of public school building in Saudi Arabia. Masters thesis, King Fahd University of Petroleum and Minerals.

Abu Al-Saud, Wajih Abdul-Elah (1996) A new enhanced binary ghost canceling reference signal for TV ghosts. Masters thesis, King Fahd University of Petroleum and Minerals.

Abul Hafidh, Esam ibn Hamed Ahmad (1996) Magnetic energy losses and pinning forces in Y1Ba2Cu3O7/Ag2O high- Tc superconductor. Masters thesis, King Fahd University of Petroleum and Minerals.

Abdul-Raheem, Mohammed (1996) The Designing of objects using rational splines with shape control. Masters thesis, King Fahd University of Petroleum and Minerals.

Ahmed, Mohammed Sharfuddin (1996) The effect of casting and curing temperatures on the properties of concrete. Masters thesis, King Fahd University of Petroleum and Minerals.

Ahmad, Firoz (1996) Magnetic field management in underground cables. Masters thesis, King Fahd University of Petroleum and Minerals.

Al-Ajaji, Abdulaziz Omer (1996) Waterproofing of roofs of residential buildings in Saudi Arabia. Masters thesis, King Fahd University of Petroleum and Minerals.

Al-Anazi, Khalaf J. (1996) Effects of oily sludge landforming on the soils environment. Masters thesis, King Fahd University of Petroleum and Minerals.

Ashraf, Farooq (1996) Routing in multicomputer netwroks: a classifcation and comparison. Masters thesis, King Fahd University of Petroleum and Minerals.

Asi, Ibrahim Mohammed Khalil (1996) Performance modeling of Arabian asphalt using HP-GPC chromatography. PhD thesis, King Fahd University of Petroleum and Minerals.

Azam, Sahhid Majeed (1996) Experimental investigation of biofilter parameters. Masters thesis, King Fahd University of Petroleum and Minerals.

Al-Dubabe, Ibrahim Ahmed Suliman (1996) Polymer modification of Arab Asphalt to Suit Gulf Countries' performance requirements. PhD thesis, King Fahd University of Petroleum and Minerals.

Daud, Feroze Badruddin (1996) Design and analysis of a hierarchical, fault tolerant, multicomputer network. Masters thesis, King Fahd University of Petroleum and Minerals.

Farook, Mohammad (1996) Component selection and pipelining using stochastic evolution. Masters thesis, King Fahd University of Petroleum and Minerals.

Furaidan, Monther Rashed (1996) On the spectral limit points of graphs. Masters thesis, King Fahd University of Petroleum and Minerals.

Al-Helali, Khalid Raiyes Muhsen (1996) Developing a price index for school projects in Saudi Arabia. Masters thesis, King Fahd University of Petroleum and Minerals.

Hasan, Wasif (1996) A Novel fast packet switch architecture for ATM networks. Masters thesis, King Fahd University of Petroleum and Minerals.

Ibrahim, Mohammed (1996) Performance evaluation of concrete surface treatment materials. Masters thesis, King Fahd University of Petroleum and Minerals.

Jibril, Baba El-Yakubu (1996) Modeling of transient gas-solid reactions in a fixed-based reactor. Masters thesis, King Fahd University of Petroleum and Minerals.

Khan, Mohammed Abdul Razzaq (1996) Numerical simulation of turbulent natural convection in enclosures. Masters thesis, King Fahd University of Petroleum and Minerals.

Matter, Wael Saied Ali (1996) Geology of the early paleogene phosphorite deposits of Northwestern Saudi Arabia. Masters thesis, King Fahd University of Petroleum and Minerals.

Mehmood, Muhammad Aamir (1996) Evaluation of empirically derived PVT properties for oil field brines. Masters thesis, King Fahd University of Petroleum and Minerals.

Al-Naser, Abdul-Elah Ali (1996) Liquid-liquid extraction of some rare earth metal ions by polyoxyalkylene systems. Masters thesis, King Fahd University of Petroleum and Minerals.

Moizuddin, Mohammed (1996) Solution of the resource-constrained activity networks. Masters thesis, King Fahd University of Petroleum and Minerals.

Najjari, Homam Marwan Rashad (1996) Investigation of optimization techniques for scheduling precedence computations with communication costs. Masters thesis, King Fahd University of Petroleum and Minerals.

Qadri, Syed Shah Hadi Hussain (1996) A Framework for yield enhancement of processor arrays. Masters thesis, King Fahd University of Petroleum and Minerals.

Rayhan, Abdallah Mousa Rezq (1996) A grafting approach to neural network construction. Masters thesis, King Fahd University of Petroleum and Minerals.

Al-Thunaian, Saleh A. (1996) Cost estimation practice for buildings by A/E firms in the Eastern Province, Saudi Arabia. Masters thesis, King Fahd University of Petroleum and Minerals.

Al-Utaibi, Misfer A. (1996) The relationship between the project size and the safety level in building construction projects. Masters thesis, King Fahd University of Petroleum and Minerals.

Siddiqui, Mohsin (1996) Vibration control of rotor-bearing systems using neural networks. Masters thesis, King Fahd University of Petroleum and Minerals.

Suliman, Fakhr Eldin Osman (1996) Chemometric optimization and kinetic developments in flow injection analysis. PhD thesis, King Fahd University of Petroleum and Minerals.

Vaqar, Sayyid Anas (1996) Self organizing variable structure controllers. Masters thesis, King Fahd University of Petroleum and Minerals.

Al-Zaharnah, Ihab Talal (1996) Quantitative and subjective assessments of indoor air quality in KFUPM buildings. Masters thesis, King Fahd University of Petroleum and Minerals.

Ahmed, C. S. Khalid (1996) Hybrid liquid desiccant based air-conditioning system. Masters thesis, King Fahd University of Petroleum and Minerals.

Khan, Mohammad Sultan (1996) Effect of thermal-hydraulic parameters on CaCO₃ scalling in heat exchangers. Masters thesis, King Fahd University of Petroleum and Minerals.

Khan, Khurram Ahmed (1996) Studies of the terephthalic acid and dihydroxy diphenyl sulfone liquid crystalline copolymer and its composites. Masters thesis, King Fahd University of Petroleum and Minerals.

Lashari, Abdul Nabi (1996) Protection of reinforced concrete using corrosion inhibitors and coatings. Masters thesis, King Fahd University of Petroleum and Minerals.

Ahmad, Shaik Ilias (1996) Three-dimensional transient temperature analysis of friction welding of cylindrical bars. Masters thesis, King Fahd University of Petroleum and Minerals.

Cunningham, Michael John (1996) Comparison of accepted procedures for determining schedule and cost impact. Masters thesis, King Fahd University of Petroleum and Minerals.

Qureshi, Rizwan Ahmad (1996) Excitation transfer in highly excited calcium atoms through thermal collisions with argon. Masters thesis, King Fahd University of Petroleum and Minerals.

Shahzad, Farrukh (1996) Management of magnetic fields in and around substations. Masters thesis, King Fahd University of Petroleum and Minerals.

Waris, Mohammed Abdul (1996) Plastic shrinkage cracking in hot weather conditions. Masters thesis, King Fahd University of Petroleum and Minerals.

Abdallah, Khalid S. (1996) Computer aided instruction model for procedural programming languages. Masters thesis, King Fahd University of Petroleum and Minerals.

Al-Maghrabi, Tareq Al-Sayed (1996) An enhanced convex-elastic net technique for solving E-TSP. Masters thesis, King Fahd University of Petroleum and Minerals.

Al-Nemer, Taher Mohammed Taher (1996) Fuzzy logic-based PID self-tuning. Masters thesis, King Fahd University of Petroleum and Minerals.

Abidogun, Kamorudeen Babatunde (1996) Analysis of turbulent transport properties in a swirling flow of a Can-type combustor. Masters thesis, King Fahd University of Petroleum and Minerals.

Al-Alawi, Jasem (1996) Role of parity violating Hamiltonian in-non-relativistic quark model for non-leptonic hyperon weak transitions. Masters thesis, King Fahd University of Petroleum and Minerals.

Antar, Mohamed Abdelkarim Mohamed (1996) Analysis of fluid flow and heat transfer around and inside a liquid sphere. PhD thesis, King Fahd University of Petroleum and Minerals.

Haq, Syed Nisarul (1996) A Load balancing framework for distributed and parallel applications. Masters thesis, King Fahd University of Petroleum and Minerals.

Hassanain, Mohammad A. (1996) Design for systems replacement in buildings. Masters thesis, King Fahd University of Petroleum and Minerals.

Kareemuddin, Shaik M. M. J. (1996) Stabilization of Raney Nickel catalyst for fuel cell electrodes. Masters thesis, King Fahd University of Petroleum and Minerals.

Naseer, Syed Khaja (1996) A process miggration subsystem for distributed applications: design & implementation. Masters thesis, King Fahd University of Petroleum and Minerals.

Pulak, Mohammad Farrukh Shiar (1996) Optimization models for industrial process targeting. Masters thesis, King Fahd University of Petroleum and Minerals.

Tayyib, Mohammed A. (1996) Parallelizing the rete-match algorithm for distributed memory architecturs. Masters thesis, King Fahd University of Petroleum and Minerals.

Al-Dubabe, Ibrahim Ahmed Suliman (1996) Polymer modification of Arab Asphalt to Suit Gulf Countries' performance requirements. PhD thesis, KFUPM.

Al-Khaldi, Fahad AbdulAziz (1996) Evaluation of a patented combined water desalination and power generating plant. Masters thesis, KFUPM.

Asi, Ibrahim Mohammed Khalil (1996) Performance modeling of Arabian asphalt using HP-GPC chromatography. PhD thesis, KFUPM.

civil, civil (1996) Proposed methodology for designing the signal change interval. Masters thesis, KFUPM.

Al-Anazi, Khalaf J. (1996) Effects of oily sludge landforming on the soils environment. Masters thesis, KFUPM.

Al-Assar, Rajai Samih (1996) Unsteady hydrodynamic forces on spheroidal bodies. PhD thesis, KFUPM.

Beg, Mansoor Ali (1996) Numerical modeling of RC slabs on tensionless elastic subgrade. Masters thesis, KFUPM.

Ibrahim, Mohammed (1996) Performance evaluation of concrete surface treatment materials. Masters thesis, KFUPM.

Waris, Mohammed Abdul (1996) Plastic shrinkage cracking in hot weather conditions. Masters thesis, KFUPM.

civil, civil (1996) Protection of reinforced concrete using corrosion inhibitors and coatings. Masters thesis, KFUPM.

civil, civil (1996) The effect of casting and curing temperatures on the properties of concrete. Masters thesis, KFUPM.

Farooqi, Johar Khurshid (1996) Fatigue damage characterization and life prediction in carbon fiber reinforced plastic composites. Masters thesis, King Fahd University of Petroleum and Minerals.

Gbadebo, Semiu Adesina (1996) An experimental investigation of heat transfer in the thermally developing region of a pulsating pipe flow. Masters thesis, King Fahd University of Petroleum and Minerals.

Al-Hadhrami, Luai M. Al-Hamas (1996) Analysis of turbulent transport properties in the near field of an isothermal free jet. Masters thesis, King Fahd University of Petroleum and Minerals.

Kidwai, Shariq Uddin. (1996) Cross section measurements of 13C(d, p) 14C reaction at sub-coulomb barrier energies. Masters thesis, King Fahd University of Petroleum and Minerals.

Nahshal, Ahmad Muhammad Ahmad (1996) Multimedia database systems: conceptual modeling. Masters thesis, King Fahd University of Petroleum and Minerals.

Ahmed, Habib-ur-Rehman (1995) Characterization and stabilization of Eastern Saudi Marls. Masters thesis, King Fahd University of Petroleum and Minerals.

Ahmed, Muhammad Naweed (1995) Computational study of the flowfield through a cascade of NACA 0012 Airfoils. Masters thesis, King Fahd University of Petroleum and Minerals.

Ahmed, Syed Tauseef Nizam (1995) A novel architecture for switched-capacitor FIR filters. Masters thesis, King Fahd University of Petroleum and Minerals.

Asad, Mohammed (1995) Computational Modelling of shrinkage in repaired concrete. Masters thesis, King Fahd University of Petroleum and Minerals.

Asif, Mohammed (1995) Assessment, prediction and enhancement of the reliability of extrusion dies. Masters thesis, King Fahd University of Petroleum and Minerals.

Biswas, Mohammad Elias (1995) Optimization of continuous counter current adsorption systems. Masters thesis, King Fahd University of Petroleum and Minerals.

DasaNova, Astra Agus Pramana (1995) Oxygen Stoichiometry effect on magnetic properties of Yba₂Cu₃O₇_δ superconductor. Masters thesis, King Fahd University of Petroleum and Minerals.

Khan, Asad Mohammad (1995) Removal of coliphage and bacteria through slow sand filtration. Masters thesis, King Fahd University of Petroleum and Minerals.

Al-Nasser, Abdulaziz Jaffar (1995) Enhancement of AC transient stability through multiterminal DC (MTDC) systems. Masters thesis, King Fahd University of Petroleum and Minerals.

Salman, Shuaib (1995) Impact of process variables on nutrient removal in slow sand filters. Masters thesis, King Fahd University of Petroleum and Minerals.

Mokheimer, Esmail Mohamed Ali (1995) Heat transfer in eccentric annuli. PhD thesis, King Fahd University of Petroleum and Minerals.

Abdelrazig, Abdalla Abdelrahman (1995) Computerized AHP model for solving Bid/no-Bid decision problem. Masters thesis, King Fahd University of Petroleum and Minerals.

Baig, Mirza Ghouse (1995) Laboratory evaluation of hedmanite and lime modified asphalt concrete mixes. Masters thesis, King Fahd University of Petroleum and Minerals.

Al-Bedoor, Bassem Odeh (1995) Dynamic modeling and analysis of axially moving beam with prismatic and revolute joints. PhD thesis, King Fahd University of Petroleum and Minerals.

Al-Shahrani, Saad Mohammad (1995) Active filters and oscillators using current feedback operational amplifiers. Masters thesis, King Fahd University of Petroleum and Minerals.

Saleem-ur-Rahman, (1995) Development of Raney-Ni gas diffusion electrodes for fuel-cells. PhD thesis, King Fahd University of Petroleum and Minerals.

Khokhar, Aleem Aman (1995) Effect of heat treatment on the flow induced corrosion of aluminum-SiC(p). Masters thesis, King Fahd University of Petroleum and Minerals.

Al-Absi, Bassam Ibrahim (1995) Numerical discussion of the time domain inverse scattering problem for wave equation. Masters thesis, King Fahd University of Petroleum and Minerals.

Ahsan, Mohamed (1995) Architectures for arithmetic operations in Galois Fileds GF(2m). Masters thesis, King Fahd University of Petroleum and Minerals.

Ashrafuddin, Mohammed (1995) Prediction of shear/peeling failure in plated R/C beams. Masters thesis, King Fahd University of Petroleum and Minerals.

Baik, Tambi Mohammad Sharief (1995) Neocognitron: application to the handwritten Hindi numerals. Masters thesis, King Fahd University of Petroleum and Minerals.

Al-Farra, Khalid Jawdat Kamel (1995) Timing driven floorplanning. Masters thesis, King Fahd University of Petroleum and Minerals.

Chaudhy, Muhammad Arshad Saeed (1995) Analysis of packed bed biofilm reactor under single and multiple substrate utilization. Masters thesis, King Fahd University of Petroleum and Minerals.

Elleithy, Wael Mohamed Ali (1995) Bond and durability of fusion-bonded epoxy-coated steel bars. Masters thesis, King Fahd University of Petroleum and Minerals.

Al-Ghafly, Mohammed Ahmed (1995) Delay in the Construction of public utility projects in Saudi Arabia. Masters thesis, King Fahd University of Petroleum and Minerals.

Al-Ghamdi, Muhammad Ali Mubarak (1995) Evaluation of work sampling as an indicator of construction labor productivity. Masters thesis, King Fahd University of Petroleum and Minerals.

Hasan, Ayaz (1995) Modeling of groundwater flow system in Wadi Al-Miyah area, Eastern Saudi Arabia. Masters thesis, King Fahd University of Petroleum and Minerals.

Hasan, Muhammad Nayyar (1995) On the synthesis and optimization of MVL functions. Masters thesis, King Fahd University of Petroleum and Minerals.

Hashmi, Amir (1995) Timing driven global routing for standard cell design. Masters thesis, King Fahd University of Petroleum and Minerals.

Khan, Mohammad Shebder (1995) Boundary element analysis of nonprismatic beams and plates. Masters thesis, King Fahd University of Petroleum and Minerals.

Magaji, Umar Isa (1995) Assessment of hydrogeological parameters from thin-section study of middle cretaceous sandstones. Masters thesis, King Fahd University of Petroleum and Minerals.

Makkawi, Yassir T. (1995) Investigation of heat transfer in a rectangular packed duct with constant heat flux and asymmetrical wall temperatures. Masters thesis, King Fahd University of Petroleum and Minerals.

Mohiuddin, Naseer Ahmed (1995) Use of small diameter cores in evaluation of in-situ concrete strength in Eastern Saudi Arabia. Masters thesis, King Fahd University of Petroleum and Minerals.

Al-Mouslli, Nabeel (1995) Design & Implementation of a 3D graphics system an interactive hierarchical modeling approach. Masters thesis, King Fahd University of Petroleum and Minerals.

Mohammed, Aliyu Shazali (1995) Elasto-plastic collapse load analysis of single mitred bends. Masters thesis, King Fahd University of Petroleum and Minerals.

Al-Rasasi, Ibrahim H. (1995) Local properties of some polynomial classes of harmonic mappings. Masters thesis, King Fahd University of Petroleum and Minerals.

Odogba, Jibril (1995) Application of H∞ optimization techniques in image & signal processing. Masters thesis, King Fahd University of Petroleum and Minerals.

Rauf, Asim (1995) Investigation of fatigue crack growth rates under variable amplitude loading. Masters thesis, King Fahd University of Petroleum and Minerals.

Sayani, Mohammed Asif (1995) Associative memory neural networks for error correction of linear block codes. Masters thesis, King Fahd University of Petroleum and Minerals.

Al-Shams, Abdul-Aziz Mohammed (1995) Transient stability assessment using artificial neural networks. Masters thesis, King Fahd University of Petroleum and Minerals.

Taher, Salah El-Din Mohammed Fahmy (1995) Canonical elastoplastic - damage modelling of reinforced concrete. PhD thesis, King Fahd University of Petroleum and Minerals.

Tahir, Bassam M. (1995) Concrete repair with silica fume shotcrete. Masters thesis, King Fahd University of Petroleum and Minerals.

Thadpatri, Mohammed Abbas (1995) Maintenance scheduling of power system generating units by tabu search. Masters thesis, King Fahd University of Petroleum and Minerals.

Ahmed, Shakeel (1995) Synthesis, modification and catalytic evaluation of high-silica zeolites. PhD thesis, King Fahd University of Petroleum and Minerals.

Farooqui, Aamir Alam (1995) Design, modeling, and VLSI implementation of a RISC dataflow array processor. Masters thesis, King Fahd University of Petroleum and Minerals.

Mohammed, Niaz (1995) A groundwater velocity and dissolved oxygen on bioremediation of gasoline-contaminated sandy aquifers. PhD thesis, King Fahd University of Petroleum and Minerals.

Siddique, Ikram-ul-Haq (1995) Calculations of turbulent flow and heat transfer in periodically converging-diverging channels. Masters thesis, King Fahd University of Petroleum and Minerals.

Abba, AlHaji Ibrahim (1995) Modeling of Multicomponent gas-solid reactions. Masters thesis, King Fahd University of Petroleum and Minerals.

Afroz, Syed Mohiuddin (1995) Effect of captive riders in intercity mode-choice modeling. Masters thesis, King Fahd University of Petroleum and Minerals.

Hussain, Asiq (1995) Recovery performance and relative permeabilities of composite cores. Masters thesis, King Fahd University of Petroleum and Minerals.

Jamiiru, Luttamaguzi (1995) One dimensional coupled vibrating systems with control applied at the coupled points. Masters thesis, King Fahd University of Petroleum and Minerals.

Manzoor-ul-Haq, (1995) Reliability-based maintenance strategies for heat exchanges subject to fouling. Masters thesis, King Fahd University of Petroleum and Minerals.

AlHumaigani, Muhammad Abdallah (1995) A Formal VLSI parallel description and design environment. Masters thesis, King Fahd University of Petroleum and Minerals.

Hussain, Sajid (1995) Runlength limited codes with error correction capabilities. Masters thesis, King Fahd University of Petroleum and Minerals.

Al-Khamis, Mohammed Najim (1995) Evaluation of correlations for natural gas compressibility factors. Masters thesis, King Fahd University of Petroleum and Minerals.

Al-Sahli, Khaled A. S. (1995) A neural network approach to feedback linearization. Masters thesis, King Fahd University of Petroleum and Minerals.

Abu-Saleh, Hazem Muhebbadin Ahmad Naji (1995) AutoVLSI system: a layout system for general-cell VLSI design. Masters thesis, King Fahd University of Petroleum and Minerals.

Abu-Mutlaq, Maher Hamdan Khalil (1995) Dataflow processor for back propagation nueral networks: architecture and performance evaluation. Masters thesis, King Fahd University of Petroleum and Minerals.

Okasha, Taha Moustafa Hamed (1995) An experimental study of oil recovery from tarmat reservoirs using hot water and solvent flooding. PhD thesis, King Fahd University of Petroleum and Minerals.

Abdulla, Abdul Hai Mohammed (1995) Reliability of modular fault-tolerant hypercube networks. Masters thesis, King Fahd University of Petroleum and Minerals.

Al-Asiri, Nasser Hassan (1995) Evaluation of thermal resistivity of soils in Saudi Arabia. Masters thesis, King Fahd University of Petroleum and Minerals.

Cheema, Atif Nazir (1995) Reliability equivalents for AC adequacy evaluation of large power systems. Masters thesis, King Fahd University of Petroleum and Minerals.

Al-Hazmi, Talal Ali (1995) Toward standardization of public building maintenance contracts in Saudi Arabia. Masters thesis, King Fahd University of Petroleum and Minerals.

Al-Jaziri, Abdul Karim Mohammad (1995) Experimental investigation of various physical factors affecting the stability of water-in-oil emulsions in oil production. Masters thesis, King Fahd University of Petroleum and Minerals.

Al-Qahtani, Mohhmad Shayea Ali (1995) Forced flow in the entry region of concentric annuli with impulsively rotated inner walls. Masters thesis, King Fahd University of Petroleum and Minerals.

Afroz, Syed Mohiuddin (1995) Effect of captive riders in intercity mode-choice modeling. Masters thesis, KFUPM.

Ahmed, Habib-ur-Rehman (1995) Characterization and stabilization of Eastern Saudi Marls. Masters thesis, KFUPM.

Al-Asiri, Nasser Hassan (1995) Evaluation of thermal resistivity of soils in Saudi Arabia. Masters thesis, KFUPM.

Baig, Mirza Ghouse (1995) Laboratory evaluation of hedmanite and lime modified asphalt concrete mixes. Masters thesis, KFUPM.

Fazlur Rahman, Qureshi Abbas Ali Mohammad (1995) Optimization of continuous post-tensioned bridge decks of prescribed lengths. Masters thesis, KFUPM.

Khan, Asad Mohammad (1995) Removal of coliphage and bacteria through slow sand filtration. Masters thesis, KFUPM.

Mohammed, Niaz (1995) A groundwater velocity and dissolved oxygen on bioremediation of gasoline-contaminated sandy aquifers. PhD thesis, KFUPM.

Salman, Shuaib (1995) Impact of process variables on nutrient removal in slow sand filters. Masters thesis, KFUPM.

Taher, Salah El-Din Mohammed Fahmy (1995) Canonical elastoplastic - damage modelling of reinforced concrete. PhD thesis, KFUPM.

Asad, Mohammed (1995) Computational Modelling of shrinkage in repaired concrete. Masters thesis, KFUPM.

Elleithy, Wael Mohamed Ali (1995) Bond and durability of fusion-bonded epoxy-coated steel bars. Masters thesis, KFUPM.

Khan, Mohammad Shebder (1995) Boundary element analysis of nonprismatic beams and plates. Masters thesis, KFUPM.

Mohammed, Aliyu Shazali (1995) Elasto-plastic collapse load analysis of single mitred bends. Masters thesis, KFUPM.

Mohiuddin, Naseer Ahmed (1995) Use of small diameter cores in evaluation of in-situ concrete strength in Eastern Saudi Arabia. Masters thesis, KFUPM.

civil, civil (1995) Prediction of shear/peeling failure in plated R/C beams. Masters thesis, KFUPM.

Abolnour, Mohammad Mahmoud (1994) The relationship of fee structure in engineering offices and design deficiency. Masters thesis, King Fahd University of Petroleum and Minerals.

Al-Bani, Mohammad Faez Wijdan Hassan (1994) Developing a concrete cost estimating model for small residential buildings. Masters thesis, King Fahd University of Petroleum and Minerals.

Al-Barghouthi, Maher Talat (1994) Liability allocation among the parties to fixed-price construction contracts in Saudi Arabia. Masters thesis, King Fahd University of Petroleum and Minerals.

Al-Fattah, Saud Mohammed A. (1994) Development of empirical equations for water-oil relative permeability. Masters thesis, King Fahd University of Petroleum and Minerals.

Khan, Mohammed Shahid Tanvir (1994) Genetic algorithm for timing influenced floorplanning of VLSI designs. Masters thesis, King Fahd University of Petroleum and Minerals.

Mahmoud, Tawfiq (1994) Assessment of the Problems facing the maintenance industry in Saudi Arabia. Masters thesis, King Fahd University of Petroleum and Minerals.

Malikakkal, Navaz Cheriya (1994) Chloride diffusion in concrete/prediction of the onset of corrosion in reinforced concrete structures. Masters thesis, King Fahd University of Petroleum and Minerals.

Shafi, Fahim (1994) Prediction of harmonic and intermodulation performance of frequency dependent nonlinear circuits and systems. Masters thesis, King Fahd University of Petroleum and Minerals.

Shokoya, Olawale Surajudeen (1994) Corrosivity of water-base drilling fluids in deep, hot wells. Masters thesis, King Fahd University of Petroleum and Minerals.

Tiwana, Rizwan Ali (1994) A PC-based system for the determination of harmonics and intermodulation products in nonlinear circuits. Masters thesis, King Fahd University of Petroleum and Minerals.

Abdel-Aziz, Essam Zaki (1994) Analysis of the ionized field around multi-phase power transmission lines. PhD thesis, King Fahd University of Petroleum and Minerals.

Al-Abdullatif, Umar Saleh (1994) Assessment of the onset condition of upward streamers from energized Franklin rods. Masters thesis, King Fahd University of Petroleum and Minerals.

Hakim, Ali Abbas (1994) A Parametric study of water-coning in horizontal wells. Masters thesis, King Fahd University of Petroleum and Minerals.

Hubbi, Essam Mohammad Khair (1994) Intermediate forms in high-level synthesis. Masters thesis, King Fahd University of Petroleum and Minerals.

Al-Bagawi, Jamil Jarallah Awadh (1994) Energy and exergy analysis of Ghazlan Power Plant. Masters thesis, King Fahd University of Petroleum and Minerals.

Khan, Muhammad Haroon (1994) Digitally programmable tuned circuits. Masters thesis, King Fahd University of Petroleum and Minerals.

Al-Sughaiyer, Mohammad Ali (1994) The effects of mode perceptions on intercity mode-choice behavior in Saudi Arabia. PhD thesis, King Fahd University of Petroleum and Minerals.

Khalid, Mohammed Abdul Aziz (1994) A framework for the VLSI implementation of systolic tree based data structures. Masters thesis, King Fahd University of Petroleum and Minerals.

Shittu, Abiodun Ahmad (1994) Study of periodic waveguides by the finite-difference time-domain method and the method of lines. PhD thesis, King Fahd University of Petroleum and Minerals.

Al-Attas, Husain Salem (1994) On the blow-up by comparison. Masters thesis, King Fahd University of Petroleum and Minerals.

Eme, Vincent Obiora (1994) Design of an Alkaline/Surfactant/Polymer enhanced oil recovery scheme for a Saudi Arabian limestone reservoir. Masters thesis, King Fahd University of Petroleum and Minerals.

Faizullah, Safiullah (1994) Partitioning and mapping nested loops on message-passing multiprocessors. Masters thesis, King Fahd University of Petroleum and Minerals.

Al-Guwaizani, Abdulaziz Saud (1994) Sedimentology and geochemistry of Qurayyah Sabkha, Eastern Saudi Arabia. Masters thesis, King Fahd University of Petroleum and Minerals.

Muhammad, Mahmoud Abdul Raouf (1994) Analysis of the factors affecting the gelation time for polyacrylamide-redox system. Masters thesis, King Fahd University of Petroleum and Minerals.

Ahmed, Osama Abdel-Wahhab (1994) Application of artificail neural networks to optical character recognition. Masters thesis, King Fahd University of Petroleum and Minerals.

Ahmed, Rabee Mohamed Reffat (1994) Development of an expert system for evaluating the environmental quality of office buildings. Masters thesis, King Fahd University of Petroleum and Minerals.

Al-Ahmari, Abdullah Said M. (1994) Effects of diversity combining, coding and equalization on digital microcellular mobile communication systems. Masters thesis, King Fahd University of Petroleum and Minerals.

Ali, Syed Asaf Maruf (1994) Design and modeling of a real-time RISC processor in VHDL. Masters thesis, King Fahd University of Petroleum and Minerals.

Al-Baghli, Nadhir Abbas (1994) Adsorption of light gases and their mixtures on SR-115 and ETS-10 Zeolites. Masters thesis, King Fahd University of Petroleum and Minerals.

Ali, Shahid (1994) Scheduling and allocation in high-level synthesis using genetic algorithm. Masters thesis, King Fahd University of Petroleum and Minerals.

Al-Hamouz, Zakariya Mahmoud (1994) Analysis of the ionized field around HVDC transmission lines. PhD thesis, King Fahd University of Petroleum and Minerals.

Al-Harari, Farid Yousef Abdul-Rahman (1994) An expert system for load flow planning. Masters thesis, King Fahd University of Petroleum and Minerals.

Hashem, Bassam Mohamed (1994) Performance analysis of digital modulation schemes used in mobile radio. Masters thesis, King Fahd University of Petroleum and Minerals.

Karimjee, Yousuali Karim (1994) A clustering-based algorithm for the rectilinear steiner tree problem. Masters thesis, King Fahd University of Petroleum and Minerals.

Khan, Abdul Malik (1994) Fourier descriptor approach for defect analysis in ultrasonic nondestructive evaluation. Masters thesis, King Fahd University of Petroleum and Minerals.

Khan, Asad-ur-Rehman (1994) Three dimensional finite element analysis of brittle materials using CDM model. Masters thesis, King Fahd University of Petroleum and Minerals.

Masoud, Osama Taleb (1994) An integrated stereo algorithm based on coarse-to-fine features and intensity values. Masters thesis, King Fahd University of Petroleum and Minerals.

Al-Mulhem, Abdulaziz Sultan (1994) Hardware specific optimization on RTL description. Masters thesis, King Fahd University of Petroleum and Minerals.

Nassar, Khaled Muhammad Walid (1994) Timing driven placement algorithm for standard-cell design. Masters thesis, King Fahd University of Petroleum and Minerals.

Naveed, Asad (1994) Performance evaluation of mobile communication systems. Masters thesis, King Fahd University of Petroleum and Minerals.

Nizami, S. S. A. K. Javeed (1994) Control of hypersonic flight trajectories to minimize heat load. Masters thesis, King Fahd University of Petroleum and Minerals.

Al-Ofi, Khalaf Aidhah (1994) The effect of signal coordination on interesection safety. PhD thesis, King Fahd University of Petroleum and Minerals.

Al-Saif, Fouad Ali H. (1994) A programmable self-adjusting SCR-based AC voltage regulator. Masters thesis, King Fahd University of Petroleum and Minerals.

Qubaiah, Jamal Khaled Nejem (1994) Numerical simulation of groundwater depletion in Al-Hasa area. Masters thesis, King Fahd University of Petroleum and Minerals.

Samiuddin, Mohammed (1994) Communication over fading channels with frequency offsets. Masters thesis, King Fahd University of Petroleum and Minerals.

Shehadeh, Bassam Abdulrahman Mahmoud (1994) Measurements of L-Subshell Ionization Cross Sections by energetic a particles for Ho, Er, and Tm. Masters thesis, King Fahd University of Petroleum and Minerals.

Shehata, Ali Abdul-Aziz Mohammad (1994) Mixed convection from a horizontal cylinder rotating in a cooling cross-stream. Masters thesis, King Fahd University of Petroleum and Minerals.

Talaq, Jaleel Hasan (1994) Identification of block cascade models of nonlinear systems. Masters thesis, King Fahd University of Petroleum and Minerals.

Tasadduq, Imran Ali (1994) Nonlinear plant control using neural networks: a design procedure through linearization. Masters thesis, King Fahd University of Petroleum and Minerals.

Zainaddin, Samir Ahmad (1994) A neural network approach for load flow estimation and var allocation. Masters thesis, King Fahd University of Petroleum and Minerals.

Seddigi, Zaki Shaker (1994) Characterization of the acidic properties of zeolites and their catalytic behavior in the synthesis of MTBE. Masters thesis, King Fahd University of Petroleum and Minerals.

Al-Qatari, Saeed Abdulwahid (1994) Automated billing system for public utilities. Masters thesis, King Fahd University of Petroleum and Minerals.

Al-Ghassab, Majed Saleh (1994) Successive shortest path algorithms for a class of network problem. Masters thesis, King Fahd University of Petroleum and Minerals.

Al-Majid, Majid Jafar (1994) Method of lines analysis of Gaussian beam coupling to dielectric slab waveguide. Masters thesis, King Fahd University of Petroleum and Minerals.

Al-Regib, Emad Ibrahim (1994) Nonholonomic motion planning for wheeled mobile systems using geometric phases. Masters thesis, King Fahd University of Petroleum and Minerals.

Abu-Asbah, Muhannad Mahmoud (1994) Construction productivity awareness and improvement programs in Saudi Arabia. Masters thesis, King Fahd University of Petroleum and Minerals.

Al-Amir, Muhammad Hasan (1994) Computer utilization by construction contractors in Saudi Arabia. Masters thesis, King Fahd University of Petroleum and Minerals.

Anjum, M. M. Farooq (1994) Self tuning control of nonlinear systems: a meural net based approach. Masters thesis, King Fahd University of Petroleum and Minerals.

Beg, Ghulam Kabir (1994) The Galerkin method for singular nonoscillatory two-point boundary value problems. PhD thesis, King Fahd University of Petroleum and Minerals.

Butt, Rasheed Ahmed (1994) Design of composite die for wire drawing. Masters thesis, King Fahd University of Petroleum and Minerals.

Oloriegbe, Yahya Garba (1994) Solution properties of sidechain polymers for enhanced oil recovery. Masters thesis, King Fahd University of Petroleum and Minerals.

Saleh, Anwar A. Hussain (1994) Studies on blow-up. Masters thesis, King Fahd University of Petroleum and Minerals.

Al-Sukhni, Hassan Fakhri (1994) A C-Based high level synthesis system. Masters thesis, King Fahd University of Petroleum and Minerals.

civil, civil (1994) Swelling potential and treatment of expansive soil. Masters thesis, KFUPM.

civil, civil (1994) The effect of signal coordination on interesection safety. PhD thesis, KFUPM.

civil, civil (1994) The effects of mode perceptions on intercity mode-choice behavior in Saudi Arabia. PhD thesis, KFUPM.

Al-Khaled, Mohammad Abdul-Wahhab (1994) Deterioration of concrete structures in the coastal regions of the Republic of Yemen. Masters thesis, KFUPM.

Aziz, abdur Rauf (1994) Reduction in bond and the strength of slabs due to corrosion of reinforcement. Masters thesis, KFUPM.

Qubaiah, Jamal Khaled Nejem (1994) Numerical simulation of groundwater depletion in Al-Hasa area. Masters thesis, KFUPM.

Malikakkal, Navaz Cheriya (1994) Chloride diffusion in concrete/prediction of the onset of corrosion in reinforced concrete structures. Masters thesis, KFUPM.

civil, civil (1994) Three dimensional finite element analysis of brittle materials using CDM model. Masters thesis, KFUPM.

Dastageer, H.M. Abdulkader (1993) Laser spectroscopy of 3A2 -> 1A1 phosphorescence of sulphur dioxide. Masters thesis, King Fahd University of Petroleum and Minerals.

Ibrahim, Ahmed Aidid (1993) Separation process for the recovery of desalted water and chemical products from indigenous saline water resources. PhD thesis, King Fahd University of Petroleum and Minerals.

Hamzah, Azzam Ahmad (1993) Built-in self test logic for a histogrammer memory chip. Masters thesis, King Fahd University of Petroleum and Minerals.

Mahmoud, Magdy Ahmed Abdel-Rahman (1993) Floor finishing materials & systems: an expert system for evaluation and selection. Masters thesis, King Fahd University of Petroleum and Minerals.

Abuzaid, Nabil Said (1993) Effect of dissolved oxygen on activated carbon uptake. PhD thesis, King Fahd University of Petroleum and Minerals.

Khan, C. N. Sadath Ali (1993) The effect of temperature and salt contamination on corrosion of reinforcing steel in OPC and blended cement concretes. Masters thesis, King Fahd University of Petroleum and Minerals.

Al-Massarani, Adel Mohammed Adel (1993) Priority-based scheduling and evaluation of precedence graphs with communication times. Masters thesis, King Fahd University of Petroleum and Minerals.

Shuja, Shahzada Zaman (1993) Calculations of fluid flow and heat transfer in expanding ducts. Masters thesis, King Fahd University of Petroleum and Minerals.

Abed, Mohammed Abdul Azeem (1993) A methodology for the design of multichannel network architectures. Masters thesis, King Fahd University of Petroleum and Minerals.

Essa, Mohammad Hussein (1993) Experimental investigation of microbial growth in subsurface environment. Masters thesis, King Fahd University of Petroleum and Minerals.

Al-Naser, Usamah M. Adnan (1993) Channel characterization of radio links in the Southern Region of Saudi Arabia. Masters thesis, King Fahd University of Petroleum and Minerals.

Al-Qahtani, Ali Saeed (1993) Subjective assessment of indoor air quality in office buildings. Masters thesis, King Fahd University of Petroleum and Minerals.

Ul-Hasan, Masud (1993) Back-end design of a formal high level synthesis system. Masters thesis, Advisor: Prof. Sadiq M. Sait, Co-Advisors: Dr. Khalid M. Elleithy and Dr. Samir Abdul Jauwad. KFUPM.

Al-Abdulrazzak, Ahmad Abdulaziz (1993) Quality Management Activities in Design And Construction Phases in Saudi Arabia. Masters thesis, KING FAHD UNIVERSITY OF PETROLEUM & MINERALS.

Al-Barrak, Adel Abdulaziz (1993) Causes of Contractors’ Failures in Saudi Arabia. Masters thesis, KING FAHD UNIVERSITY OF PETROLEUM & MINERALS.

Al-Shiha, Mansoor Mohammad (1993) The Effects of Faulty Design and Construction of Building Maintenance. Masters thesis, KING FAHD UNIVERSITY OF PETROLEUM & MINERALS.

Balkhoyor, Hasan Bakor Abdullah (1993) A Study of Translational Diffusion Constants of Paramagnetic Species In Solution. Masters thesis, KING FAHD UNIVERSITY OF PETROLEUM & MINERALS.

Ghazi, Ibrahim Hamed (1993) 15N and 13C NMR Studies of the Interaction of Cyanide Ion With Gold(I) Drugs. Masters thesis, KING FAHD UNIVERSITY OF PETROLEUM & MINERALS.

Khan, Khan Abbas A., M.S. (1993) Steady state experimental evaluation of a novel Raney-Ni/PTFE gas diffusion electrode in an alkaline fuel cell. Masters thesis, King Fahd University of Petroleum and Minerals.

Khan, Khan Abbas A. (1993) Steady State Experimental Evaluation of a Novel Raney-Ni/PTFE Gas Diffusion Electrode in an Alkaline Fuel Cell. Masters thesis, KING FAHD UNIVERSITY OF PETROLEUM & MINERALS.

Masud-Ul-Hasan, (1993) Back-End Design of a Formal High Level Synthesis System. Masters thesis, KING FAHD UNIVERSITY OF PETROLEUM & MINERALS.

Khany, Sirajuddin Elyas (1993) Weilbull Analysis of Cutting Tools and Dies. Masters thesis, KING FAHD UNIVERSITY OF PETROLEUM & MINERALS.

Al-Jasem, Waleed Ebrahim (1993) On the Second Smallest Eigenvalue of The Laplacain. Masters thesis, KING FAHD UNIVERSITY OF PETROLEUM & MINERALS.

Al-Abdulrazzak, Ahmad Abdulaziz (1993) Quality management ativities in design and construction phases in Saudi Arabia. Masters thesis, King Fahd University of Petroleum and Minerals.

Al-Amoudi, Said Mohammad Said (1993) Finite Space Direct and Inverse Problem in Quantum Mechanical Scattering Theory Using the Born Approximation. Masters thesis, KING FAHD UNIVERSITY OF PETROLEUM & MINERALS.

Kaka, Ismail Ebrahim San Linn (1993) A Paleomagnetic Study of Central Harrat Rahat, Western Saudi Arabia. Masters thesis, KING FAHD UNIVERSITY OF PETROLEUM & MINERALS.

Sami, Muhammad (1993) Heat Transfer Mechanisms Governing Laser Metal Interactions. Masters thesis, KING FAHD UNIVERSITY OF PETROLEUM & MINERALS.

Al-Ahmadi, ali Saud Abbas (1993) Digital filter design by approximate time-domain modeling. Masters thesis, King Fahd University of Petroleum and Minerals.

Al-Amoudi, Said Mohammad Said (1993) Finite space direct and inverse problem in quantum Mechanical scattering theory using the born approximation. Masters thesis, King Fahd University of Petroleum and Minerals.

Al-Asfoor, Mashhoor Dawood (1993) Computerized conceptual-cost-estimating system for domestic water supply projets. Masters thesis, King Fahd University of Petroleum and Minerals.

Al-Barrak, Adel Abdulaziz (1993) Causes of contractors' failures in Saudi Arabia. Masters thesis, King Fahd University of Petroleum and Minerals.

Balkhoyor, Hasan Bakor Abdullah (1993) A Study of translational diffusion constants of paramagnetic species in solution. Masters thesis, King Fahd University of Petroleum and Minerals.

Ghazi, Ibrahim Hamed (1993) ¹⁵N and ¹³C NMR studies of the interaction of cyanide ion with gold (I) drugs. Masters thesis, King Fahd University of Petroleum and Minerals.

Al-Janabi, Yahya Taqui (1993) Chronoamperometric evaluation of several organic corrosion inhibitors by the measurement of the hydrogen permeation flux. Masters thesis, King Fahd University of Petroleum and Minerals.

Al-Jasem, Waleed Ebrahim (1993) On the second smallest eigenvalue of the Laplacian. Masters thesis, King Fahd University of Petroleum and Minerals.

Javeed, Shah Imaduddin (1993) An LP-based procedure for graph isomorphism. Masters thesis, King Fahd University of Petroleum and Minerals.

Kaka, Ismail Ebrahim San Linn (1993) A paleomagnetic study of central Harrat Rahat, Western Saudi Arabia. Masters thesis, King Fahd University of Petroleum and Minerals.

Kandil, Ahmed A. (1993) Investigation of the production performance of horizontal wells in fractured bottom water drive reservoirs. PhD thesis, King Fahd University of Petroleum and Minerals.

Khan, Khan Abbas A. (1993) Steady state experimental evaluation of a Novel raney-Ni/PTFE gas diffusion electrode in an alkaline fuel cell. Masters thesis, King Fahd University of Petroleum and Minerals.

Khany, Sirajuddin Elyas (1993) Weibull analysis of cutting tools and dies. Masters thesis, King Fahd University of Petroleum and Minerals.

Lounici, Ali (1993) Voltammetric assays and behavior of norfloxacin and nalidixic acid antibacterial drugs. Masters thesis, King Fahd University of Petroleum and Minerals.

Hasan, Masudul (1993) Back-end design of a formal high level synthesis system. Masters thesis, King Fahd University of Petroleum and Minerals.

Al-Rashed, Mohammad Abdulaziz (1993) A Framework for the development of distributed applications. Masters thesis, King Fahd University of Petroleum and Minerals.

Al-Senan, Abdrabalamir Ahmed (1993) Evaluation of Dammam carrousel treatment plant for nitrogen removal. Masters thesis, King Fahd University of Petroleum and Minerals.

Al-Shiha, Mansoor Mohammad (1993) The effects of faulty design and construction on building maintenance. Masters thesis, King Fahd University of Petroleum and Minerals.

Sami, Muhammad (1993) Heat transfer mechanisms governing laser metal interactions. Masters thesis, King Fahd University of Petroleum and Minerals.

Ziraba, Yasin Naku (1993) Non-linear finite element analysis of reinforced concrete beams repaired by plate bonding. PhD thesis, King Fahd University of Petroleum and Minerals.

Belal, Raffed (1993) An Area Efficient FPGA: Design using Non-Volatile RAM. Masters thesis, KING FAHD UNIVERSITY OF PETROLEUM & MINERALS.

Al-Qahtani, Ali Saeed (1993) Subjective Assessment of Indoor Air Quality in Office Buildings. Masters thesis, KING FAHD UNIVERSITY OF PETROLEUM & MINERALS.

Nizami, Alam (1993) Chemical Aspects of Thermal Instability in Jet Fuels From Saudi-Arabian Crude Oils. Masters thesis, KING FAHD UNIVERSITY OF PETROLEUM & MINERALS.

Ahmed, Neaz (1993) Comparative study of different methods of vibration control of rotor bearing systems. Masters thesis, King Fahd University of Petroleum and Minerals.

Belal, Raffed (1993) An area efficient FPGA: Design using non volatile RAM. Masters thesis, King Fahd University of Petroleum and Minerals.

Nizami, Alam (1993) Chemical aspects of thermal instability in jet fuels from Saudi Arabian crude oils. Masters thesis, King Fahd University of Petroleum and Minerals.

AbdulGhani, Amin Arshad (1993) A Parallel List Scheduling Algorithm: Design and Performance. Masters thesis, KING FAHD UNIVERSITY OF PETROLEUM & MINERALS.

Mir, Mujahid Ali (1993) Identification of Coherent Generators Using Linear Trajectory. Masters thesis, KING FAHD UNIVERSITY OF PETROLEUM & MINERALS.

Abdulghani, Amin Arshad (1993) A parallel list scheduling algorithm: design and performance. Masters thesis, King Fahd University of Petroleum and Minerals.

Akin, Ilke Levent (1993) Design of an echo canceller for acoustic halls. Masters thesis, KFUPM.

Akin, Ilke Levent (1993) Design of an echo canceller for acoustic halls. Masters thesis, King Fahd University of Petroleum and Minerals.

Ali, Mir Mujahid (1993) Identification of coherent generators using linear trajectory. Masters thesis, King Fahd University of Petroleum and Minerals.

Al-Najjar, Hazem Jawad Sadeg (1993) A complete inspection plan for critical components. Masters thesis, King Fahd University of Petroleum and Minerals.

Ahmed, Abdisalam Mohamed (1993) Modeling of Biological Wastewater Treatment in Sequencing Batch Reactors. Masters thesis, KING FAHD UNIVERSITY OF PETROLEUM & MINERALS.

Ahmed, Abdisalam Mohamed (1993) Modeling of biological wastewater treatment in sequencing batch reactors. Masters thesis, King Fahd University of Petroleum and Minerals.

Al-Towailib, Hassan Saeed (1993) Comparative study of computational methods for the solution of the two-dimensional reservoir flow equations. Masters thesis, King Fahd University of Petroleum and Minerals.

Al-Hassan, Mohamad Sayed Abdul-Hamid (1993) Factors Affecting Quality of Pavement Construction in Saudi Arabia. Masters thesis, KING FAHD UNIVERSITY OF PETROLEUM & MINERALS.

Al-Naser, Usamah M. Adnan (1993) Channel Characterization of Radio Links in the Southern Region of Saudi Arabia. Masters thesis, KING FAHD UNIVERSITY OF PETROLEUM & MINERALS.

Muhammad, Said Abdallah (1993) A Methodology for the High Level Design Of Object-Oriented Software. Masters thesis, KING FAHD UNIVERSITY OF PETROLEUM & MINERALS.

Yamani, Zain Hassan (1993) Experimental Determination of the Frequency Spectrum of the Rose Bengal Picosecond Fluorescence using Two Beating Ring Dye Lasers. Masters thesis, KING FAHD UNIVERSITY OF PETROLEUM & MINERALS.

Badar, Mohammad Affan (1993) An Expert System for Designing Hydrodynamic Journal Bearings. Masters thesis, KING FAHD UNIVERSITY OF PETROLEUM & MINERALS.

Khan, Zafar Haidar (1993) Modelling and Antiswing Control of Overhead Cranes. Masters thesis, KING FAHD UNIVERSITY OF PETROLEUM & MINERALS.

AbdelHadi, Maher Mahmoud Hussein (1993) Critical Currents and Pinning Forces in Y1Ba2Cu3O7-δ Hi-Tc Superconductor. Masters thesis, KING FAHD UNIVERSITY OF PETROLEUM & MINERALS.

Abdelhadi, Maher Mahmoud Hussein (1993) Critical currents and pinning forces in Y₁Ba₂Cu₃O₇₋₈Hi-T( c ) superconductor. Masters thesis, King Fahd University of Petroleum and Minerals.

Al-Zahrnah, Iyad Talal (1993) Performance Evaluation and Multiobjective Optimization of Passive Vehicle Suspension Systems. Masters thesis, KING FAHD UNIVERSITY OF PETROLEUM & MINERALS.

Badar, Mohammad Affan (1993) An expert system for designing hydrodynamic journal bearings. Masters thesis, King Fahd University of Petroleum and Minerals.

Baig, Azam (1993) Ergonomic design of a Barber's workstation. Masters thesis, King Fahd University of Petroleum and Minerals.

Al-Hassan, Mohamad Sayed Abdulhamid (1993) Factors affecting quality of pavement construction in Saudi Arabia. Masters thesis, King Fahd University of Petroleum and Minerals.

Hamed, Gehad Mohammed (1993) An expert system for concrete diagnosis. Masters thesis, King Fahd University of Petroleum and Minerals.

Hassan, Mohamed Adel (1993) Modes of nonlinear optical fibers. PhD thesis, King Fahd University of Petroleum and Minerals.

Khan, Zafar Haider (1993) Modelling and antiswing control of overhead cranes. Masters thesis, King Fahd University of Petroleum and Minerals.

Moallim, Mohamed Ali (1993) Management of groundwater resources in Somalia. Masters thesis, King Fahd University of Petroleum and Minerals.

Muhammad, Said Abdallah (1993) A Methodology for the high level design of object-oriented software. Masters thesis, King Fahd University of Petroleum and Minerals.

Nadeem, Iftikhar Ali (1993) Extensions in multicharacteristics repeat inspection plans. Masters thesis, King Fahd University of Petroleum and Minerals.

Sekerdey, Ukhail Ahamed (1993) Optimal tool replacement and resetting strategies. Masters thesis, King Fahd University of Petroleum and Minerals.

Al-Zahrnah, Iyad Talal (1993) Performance evaluation and multiobjective optimization of passive vehicle suspension systems. Masters thesis, King Fahd University of Petroleum and Minerals.

Yamani, Zain Hassan (1993) Experimental determination of the frequency spectrum of the rose Bengal picosecond fluorescence using two beating ring dye lasers. Masters thesis, King Fahd University of Petroleum and Minerals.

Abuzaid, Nabil Said (1993) Effect of dissolved oxygen on activated carbon uptake. PhD thesis, KFUPM.

Ahmed, Abdisalam Mohamed (1993) Modeling of biological wastewater treatment in sequencing batch reactors. Masters thesis, KFUPM.

Al-Senan, Abdrabalamir Ahmed (1993) Evaluation of Dammam carrousel treatment plant for nitrogen removal. Masters thesis, KFUPM.

Essa, Mohammad Hussein (1993) Experimental investigation of microbial growth in subsurface environment. Masters thesis, KFUPM.

Ziraba, Yasin Naku (1993) Non-linear finite element analysis of reinforced concrete beams repaired by plate bonding. PhD thesis, KFUPM.

Moallim, Mohamed Ali (1993) Management of Groundwater Resources in Somalia. Masters thesis, KING FAHD UNIVERSITY OF PETROLEUM & MINERALS.

civil, civil (1993) The effect of temperature and salt contamination on corrosion of reinforcing steel in OPC and blended cement concretes. Masters thesis, KFUPM.

Morsy, Mohamed Ali Mohamed (1993) Electron spini resonance studies of solute-solvent interaction in liquid-crystalline solvents. PhD thesis, King Fahd University of Petroleum and Minerals.

Zaki, M. Aiman Kamal E. (1992) Enforcing the Role of Construction Insurance in Saudi Arabia. Masters thesis, KING FAHD UNIVERSITY OF PETROLEUM & MINERALS.

Johar, Umar Mohammed (1992) All Optical Reflectivity Modulation Utilizing Surface Plasmon Resonance. Masters thesis, KING FAHD UNIVERSITY OF PETROLEUM & MINERALS.

Hassan, Hassan Mohamed (1992) Hydrogeochemistry of Alat and Khobar Aquifers in Eastern Saudi Arabia. Masters thesis, KING FAHD UNIVERSITY OF PETROLEUM & MINERALS.

Hassan, Hassan Mohamed (1992) Hydrogeochemistry of Alat and Khobar aquifers in Eastern Saudi Arabia. Masters thesis, King Fahd University of Petroleum and Minerals.

Johar, Umar Mohammed (1992) All optical reflectivity modulation utilizing surface plasmon resonance. Masters thesis, King Fahd University of Petroleum and Minerals.

Al-Shamali, Farook Mohammad Fathi (1992) New flavour symmetry and nonleptonic decays of D and B mesons. Masters thesis, King Fahd University of Petroleum and Minerals.

Zaki, M. Aiman Kamal E. (1992) Enforcing the role of construcion insurance in Saudi Arabia. Masters thesis, King Fahd University of Petroleum and Minerals.

Al-Sinan, Mazen Abdulghani (1992) Multiple Objective LP (MOLP) For Scheduling Repetitive Projects. Masters thesis, KING FAHD UNIVERSITY OF PETROLEUM & MINERALS.

Al-Gunaiyan, Khaled A. (1992) Evaluation of Contract Administration For Public Projects in Saudi Arabia. Masters thesis, KING FAHD UNIVERSITY OF PETROLEUM & MINERALS.

Al-Gunaiyan, Khaled A. (1992) Evaluation of contract administration for public projects in Saudi Arabia. Masters thesis, King Fahd University of Petroleum and Minerals.

Al-Sinan, Mazen Abdulghani (1992) Multiple objective LP (MOLP) for scheduling repetitive projects. Masters thesis, King Fahd University of Petroleum and Minerals.

Faddah, Wasim Tawfik Sulaiman (1992) Development of a DSP-32C Based Electrocardiograph Machine using Microcomputers. Masters thesis, KING FAHD UNIVERSITY OF PETROLEUM & MINERALS.

Mohiuddin, Mohammed Ahmed (1992) Coupled Bending Torsional Vibration of Rotating Shafts Using Finite Element. Masters thesis, KING FAHD UNIVERSITY OF PETROLEUM & MINERALS.

Rodriguez, Alfonso (1992) Surface Charge Behavior and Adsorption of Surfactants on Carbonate Rocks. Masters thesis, KING FAHD UNIVERSITY OF PETROLEUM & MINERALS.

Faddah, Wasim Tawfik Sulaiman (1992) Development a DSP-32C based electrocardiograph machine using microcomputers. Masters thesis, King Fahd University of Petroleum and Minerals.

Mohiuddin, Mohammed Ahmed (1992) Coupled bending torsional vibration of rotating shafts using finite element. Masters thesis, King Fahd University of Petroleum and Minerals.

Rodriguez, Alfonso (1992) Surface charge behavior and adsorption of surfactants on carbonate rocks. Masters thesis, King Fahd University of Petroleum and Minerals.

Ismail, Basel (1992) Optimal Assessment of Using Solar and Wind Power for Desalination on the Eastern Coast of Saudi Arabia. Masters thesis, KING FAHD UNIVERSITY OF PETROLEUM & MINERALS.

Al-Amoudi, Omar Saeed Baghabra (1992) Studies on soil-foundation interaction in the sabkha environment of Eastern Province of Saudi Arabia. PhD thesis, King Fahd University of Petroleum and Minerals.

Ismail, Basel (1992) Optimal assessment of using solar and wind power for desalination on the Eastern coast of Saudi Arabia. Masters thesis, King Fahd University of Petroleum and Minerals.

Al-Shuaibi, Abdulaziz Abdullah Othman (1992) On the inverstion of the Laplace transform. PhD thesis, King Fahd University of Petroleum and Minerals.

Jamal, Aqil (1992) Steady State Multiplicity In Gas-Liquid CSTRs. Masters thesis, KING FAHD UNIVERSITY OF PETROLEUM & MINERALS.

Abu-Zaid, Issam Taher Mohammad (1992) A finite difference approximation for a class of singular boundary value problems. PhD thesis, King Fahd University of Petroleum and Minerals.

Al-Qutub, Amro Mohammad (1992) Supersonic Jet Impingement on a Flat Surface at Angles from -50 to -300. Masters thesis, KING FAHD UNIVERSITY OF PETROLEUM & MINERALS.

Batran, Saud Hasan (1992) Modeling of fluidised-bed reactors; generalisation of the Werther model. Masters thesis, King Fahd University of Petroleum and Minerals.

Jamal, Aqil (1992) Steady state multiplicity in gas-liquid CSTRs. Masters thesis, King Fahd University of Petroleum and Minerals.

Al-Qutub, Amro Mohammad (1992) Supersonic jet impingement on a flat surface at angles from -5° to 30°. Masters thesis, King Fahd University of Petroleum and Minerals.

Al-Safran, Safran Ali (1992) An Arabic Sentence Generator. Masters thesis, KING FAHD UNIVERSITY OF PETROLEUM & MINERALS.

Bawah, Abdullah Umar (1992) Optimal Shunt Compensators at Nonlinear Busbars. Masters thesis, KING FAHD UNIVERSITY OF PETROLEUM & MINERALS.

Hussain, Munawar (1992) Flexture and Shear Behaviour of Damaged RC Beams Repaired By Plate Bonding. Masters thesis, KING FAHD UNIVERSITY OF PETROLEUM & MINERALS.

Tukur, Nasiru Mohammad (1992) Density-Temperature Behavior of Pure And Defined Binary and Ternary Hydrocarbon Mixtures. Masters thesis, KING FAHD UNIVERSITY OF PETROLEUM & MINERALS.

Ubaid, Mohammed Ahmed Ibrahim (1992) Generalized Balanced and Approximately Balanced Representations. Masters thesis, KING FAHD UNIVERSITY OF PETROLEUM & MINERALS.

Al-Semari, Saud Ahmad (1992) Performance of TCM with Concatenated Codes Over Fading Channels. Masters thesis, KING FAHD UNIVERSITY OF PETROLEUM & MINERALS.

Gasem, Zuhair Mattoug (1992) Fatigue Life Predictions of Notched Members in Arabian Gulf Water. Masters thesis, KING FAHD UNIVERSITY OF PETROLEUM & MINERALS.

Rana, Azher Mehboob (1992) Microcontroller Based PWM UPS. Masters thesis, KING FAHD UNIVERSITY OF PETROLEUM & MINERALS.

Shehadah, Wael Hasan A. (1992) A New Multisampling-Based Non-Coherent FSK Receiver Using Parametric Spectrum Estimators. Masters thesis, KING FAHD UNIVERSITY OF PETROLEUM & MINERALS.

Ubaid, Mohammed Ahmed Ibrahim (1992) Generalized balanced and approximately balanced representations. Masters thesis, King Fahd University of Petroleum and Minerals.

Bawah, Abdullah Umar (1992) Optimal shunt compensators at nonlinear busbars. Masters thesis, King Fahd University of Petroleum and Minerals.

Fatehi, Ashraf Husein Ismail (1992) Binary separations by pressure swing adsorption processes. PhD thesis, King Fahd University of Petroleum and Minerals.

Al-Ghumgham, Mufeed Ahmed Saleh (1992) On a neural network-based fault detection algorithm. Masters thesis, King Fahd University of Petroleum and Minerals.

Gasem, Zuhair Mattoug (1992) Fatigue life predictions of notched members in Arabian Gulf Water. Masters thesis, King Fahd University of Petroleum and Minerals.

Ghaleb, Badr Mohammed Naji (1992) Strengthening of damaged reinforced concrete beams by external fiber glass plates. Masters thesis, King Fahd University of Petroleum and Minerals.

Hussain, Munawar (1992) Flexure and shear behaviour of damaged RC beams repaired by plate bonding. Masters thesis, King Fahd University of Petroleum and Minerals.

Al-Safran, Safran Ali (1992) An Arabic sentence generator. Masters thesis, King Fahd University of Petroleum and Minerals.

Rana, Azher Mehboob (1992) Microcontroller based PWM UPS. Masters thesis, King Fahd University of Petroleum and Minerals.

Shehadah, Wael Hasan A. (1992) A new multisampling-based non-coherent FSK receiver using parametric spectrum estimators. Masters thesis, King Fahd University of Petroleum and Minerals.

Tukur, Nasiru Mohammad (1992) Density-temperature behavior of pure and defined binary and ternary hydrocarbon mixtures. Masters thesis, King Fahd University of Petroleum and Minerals.

Al-Deeb, Mohamed Mahdy (1992) A Fault Independent Test Generation Method For Combinational Logic Circuits. Masters thesis, KING FAHD UNIVERSITY OF PETROLEUM & MINERALS.

Al-Muallem, Hasan Ali Saleh (1992) Cycloaddition Reactions of A Heterocyclic Nitrone. Masters thesis, KING FAHD UNIVERSITY OF PETROLEUM & MINERALS.

Hassanain, Mostafa A. (1992) Optimal Design of Reinforced Concrete Frames. Masters thesis, KING FAHD UNIVERSITY OF PETROLEUM & MINERALS.

Rahman, A. K. M. Shamsur (1992) Numerical Simulation of Continuous Countercurrent Adsorption Systems. Masters thesis, KING FAHD UNIVERSITY OF PETROLEUM & MINERALS.

Al-Otaibi, Saud Sultan (1992) Factors Affecting Pseudo Relative Permeability Curves. Masters thesis, KING FAHD UNIVERSITY OF PETROLEUM & MINERALS.

Al-Ruwaily, Saleh Bedawi (1992) A solution of the inverse problem in quantum mechanical scattering theory using the distorted born and other approximations. Masters thesis, King Fahd University of Petroleum and Minerals.

Shehadeh, Yaqoub Mustafa (1992) Computation of Singularities in B.V.P.’S Using Finite Differences with Block-Elimination. Masters thesis, KING FAHD UNIVERSITY OF PETROLEUM & MINERALS.

Asghar, Asad (1992) Experimental investigations of the vortex flow behind a circular cone at high angles of attack. Masters thesis, King Fahd University of Petroleum and Minerals.

Al-Deeb, Mohamed Mahdy (1992) A fault independent test generation method for combinational logic circuits. Masters thesis, King Fahd University of Petroleum and Minerals.

Hassanain, Mostafa A. (1992) Optimal design of reinforced concrete frames. Masters thesis, King Fahd University of Petroleum and Minerals.

Al-Muallem, Hasan Ali Saleh (1992) Cycloaddition reactions of a heterocyclic nitrone. Masters thesis, King Fahd University of Petroleum and Minerals.

Al-Otaibi, Saud Sultan (1992) Factors affecting pseudo relative permeability curves. Masters thesis, King Fahd University of Petroleum and Minerals.

Al-Semari, Saudi Ahmad (1992) Performance of TCM with concatenated codes over fading channels. Masters thesis, King Fahd University of Petroleum and Minerals.

Shamsur-Rahman, A.K.M. (1992) Numerical simulation of continuous countercurrent adsorption systems. Masters thesis, King Fahd University of Petroleum and Minerals.

Al-Sulami, Khalil Humaid (1992) Lower Cretaceous stratigraphy and depositional history of the Rub' Al Khali bsin. Masters thesis, King Fahd University of Petroleum and Minerals.

Shehadeh, Yaqoub Mustafa (1992) Computation of singularities in B.V.P.'s using finite differences with block-elimination. Masters thesis, King Fahd University of Petroleum and Minerals.

Al-Aama, Muhammad Subhi AbdulHadi (1992) Effect of Dissolved Oxygen on the Adsorptive Capacity of a Granular Activated Charcoal For Phenol and O-Cresol. Masters thesis, KING FAHD UNIVERSITY OF PETROLEUM & MINERALS.

Hussein, IbnelWaleed Ali (1992) Hydrogen Production by The Electrolysis of Saline Water. Masters thesis, KING FAHD UNIVERSITY OF PETROLEUM & MINERALS.

AbdulGhani, Waleed M. R. (1992) Lithofacies and Diagenetic Study of the Uthmaniyah Arab-D Limestone Member (Ghawar Oil Field). Masters thesis, KING FAHD UNIVERSITY OF PETROLEUM & MINERALS.

Abdulghani, Waleed M. R. (1992) Lithofacies and diagenetic study of the Uthmaniyah Arab-D limestone member (Ghawar oil field). Masters thesis, King Fahd University of Petroleum and Minerals.

Al-Aama, Muhammad Subhi Abdulhadi (1992) Effect of dissolved oxygen on the adsorptive capacity of a granular activated charcoal for phenol and O-Cresol. Masters thesis, King Fahd University of Petroleum and Minerals.

Hussein, Ibnelwaleed Ali (1992) Hydrogen production by the electrolysis of saline water. Masters thesis, King Fahd University of Petroleum and Minerals.

Zaidi, Syed Sameen Ali (1992) Activity of Ni/A1 O catalyst for a methanation reaction. Masters thesis, King Fahd University of Petroleum and Minerals.

Al-Mulhem, Abdulrahman Abdulaziz (1992) Resonance Excitation and Electron Capture By Low Charged Ions. Masters thesis, KING FAHD UNIVERSITY OF PETROLEUM & MINERALS.

Al-Mulhem, Abdulrahman Abdulaziz (1992) Resonance excitation and electron capture by low charged ions. Masters thesis, King Fahd University of Petroleum and Minerals.

Al-Musallami, Ahmad Ismail (1992) Owners satisfaction with consultancy practices in Saudi Arabia. Masters thesis, King Fahd University of Petroleum and Minerals.

Al-Towailib, Asaad Ibrahim (1992) A New Correlation for Two-Phase Flow Through Chokes. Masters thesis, KING FAHD UNIVERSITY OF PETROLEUM & MINERALS.

Al-Towailib, Asaad Ibrahim (1992) A New correlation for two-phase flow through chokes. Masters thesis, King Fahd University of Petroleum and Minerals.

Ahmed, Eball Hifthy A. (1992) Numerical Simulation of Ice Crystal Growth (Initial Frosting Process). Masters thesis, KING FAHD UNIVERSITY OF PETROLEUM & MINERALS.

Ahmed, Eball Hifthy (1992) Numerical simulation of ice crystal growth (initial frosting process). Masters thesis, King Fahd University of Petroleum and Minerals.

Akhtar, Mohammad Shahed (1992) Performance of Multistage Interconnection Networks under Non-Uniform Reference Model. Masters thesis, KING FAHD UNIVERSITY OF PETROLEUM & MINERALS.

Al Assar, Rajai Samih (1992) Numerical Simulation of Groundwater in the Umm er Radhuma Aquifer at Shadco Project – Eastern Province. Masters thesis, KING FAHD UNIVERSITY OF PETROLEUM & MINERALS.

Al-Turabi, Mohamed Omer Hamad (1992) EPR Study of Vanadyl Complexes with Schiff Bases Derived from S-Methyl- Carbodithioato-Hydrazine. Masters thesis, KING FAHD UNIVERSITY OF PETROLEUM & MINERALS.

Hossain, Mahmood (1992) Parallel Optical Architectures For Some Comparison-Based Problems. Masters thesis, KING FAHD UNIVERSITY OF PETROLEUM & MINERALS.

Khan, Asjad Mumtaz Tahir (1992) VLSI Implementation of Petri Net Models of a Class of Digital Systems. Masters thesis, KING FAHD UNIVERSITY OF PETROLEUM & MINERALS.

Lafi, Adel Othman Mohammed (1992) The Design and Implementation of a Structured Programming Language for the Description of Optical Architectures. Masters thesis, KING FAHD UNIVERSITY OF PETROLEUM & MINERALS.

Mustafa, Yahya Mohamed Zeidan (1992) Software Design Language for Concurrent Distributed Systems. Masters thesis, KING FAHD UNIVERSITY OF PETROLEUM & MINERALS.

Osman, Sulieman Fakhreldin (1992) Flow Injection Spectrophotometric Assay of Tetracyclines in Drug Formulations. Masters thesis, KING FAHD UNIVERSITY OF PETROLEUM & MINERALS.

Waly, Hassan Aly Hassan (1992) Nonlinear Behavior of Cylinder-Plate Junction of Tensionless Elastic Subgrade. Masters thesis, KING FAHD UNIVERSITY OF PETROLEUM & MINERALS.

Khan, Shamsul Hoda (1992) Second-Law-Based Thermodynamic Analysis of Vapor-Compression Refrigeration Cycles. Masters thesis, KING FAHD UNIVERSITY OF PETROLEUM & MINERALS.

Al-Attas, Muhsen Ali (1992) Unsteady Natural Convection in Open Ended Vertical Concentric Annuli. Masters thesis, KING FAHD UNIVERSITY OF PETROLEUM & MINERALS.

Al-Bazroon, Hussain Abdulla (1992) Experimental Determination of Heat Transfer Coefficient for Water-Lithium Bromide Mixture. Masters thesis, KING FAHD UNIVERSITY OF PETROLEUM & MINERALS.

Akhtar, Mohammad Shahed (1992) Performance of multistage interconnection networks under non-uniform reference model. Masters thesis, King Fahd University of Petroleum and Minerals.

Al-Assar, Rajai Samih (1992) Numerical simulation of groundwater in the Umm Er Radhuma Aquifer at Shadco project - Eastern Province. Masters thesis, King Fahd University of Petroleum and Minerals.

Al-Attas, Muhsen Ali (1992) Unsteady natural convection in open ended vertical concentric annuli. Masters thesis, King Fahd University of Petroleum and Minerals.

Al-Bazroon, Hussain Abdulla (1992) Experimental determination of heat transfer coefficient for water-lithium bromide mixture. Masters thesis, King Fahd University of Petroleum and Minerals.

Al-Harazin, Ibrahim Muhammad (1992) Biological treatment of hazardous contaminants in sequencing batch reacors. Masters thesis, King Fahd University of Petroleum and Minerals.

Hossain, Mahmood (1992) Parallel optical architectures for some comparison-based problems. Masters thesis, King Fahd University of Petroleum and Minerals.

Khan, Asjad Mumtaz Tahir (1992) VLSI implementation of petri net models of a class of digital systems. Masters thesis, King Fahd University of Petroleum and Minerals.

Khan, Shamsul Hoda (1992) Second-law-based thermodynamic analysis of vapor-compression refrigeration cycles. Masters thesis, King Fahd University of Petroleum and Minerals.

Lafi, Adel Othman Mohammed (1992) The design and implementation of a structured programming language for the description of optical architectures. Masters thesis, King Fahd University of Petroleum and Minerals.

Mustafa, Yahya Mohamed Zeidan (1992) Software design language for concurrent distributed systems. Masters thesis, King Fahd University of Petroleum and Minerals.

Al-Ruwaihi, Khalid Mohammad (1992) Realization of a transceiver circuit based on a newly developed coding scheme. Masters thesis, King Fahd University of Petroleum and Minerals.

El-Sahn, Hany Farouk (1992) Stratigraphical and microfacies analysis of the late Eocene - early Oligocene succession of Jabal Hafeet, U.A.E. Masters thesis, King Fahd University of Petroleum and Minerals.

Osman, Sulieman Fakhreldin (1992) Flow injection spectrophotometric assay of tetracyclines in drug formulations. Masters thesis, King Fahd University of Petroleum and Minerals.

Sayeed, Mohmmad Azhar (1992) Non-uniform reference model in multiple bus multiprocessors. Masters thesis, King Fahd University of Petroleum and Minerals.

Al-Sunaidi, Abdulla Abdulaziz (1992) The neutron detection efficiency measurements of a 10 inch NE213 scientillator. Masters thesis, King Fahd University of Petroleum and Minerals.

Al-Turabi, Mohamed Omer Hamad (1992) EPR study of vanadyl complexes with Schiff bases derived from S-Methyl-Carbodithioato-Hydrazine. Masters thesis, King Fahd University of Petroleum and Minerals.

Waly, Hassan Aly Hassan (1992) Nonlinear behavior of cylinder-plate junction on tensionless elastic subgrade. Masters thesis, King Fahd University of Petroleum and Minerals.

Al-Harazin, Ibrahim Muhammad (1992) Biological Treatment of Hazardous Contaminants in Sequencing Batch Reactors. Masters thesis, KING FAHD UNIVERSITY OF PETROLEUM & MINERALS.

civil, civil (1992) Studies on soil-foundation interaction in the sabkha environment of Eastern Province of Saudi Arabia. PhD thesis, KFUPM.

Al-Aama, Muhammad Subhi Abdulhadi (1992) Effect of dissolved oxygen on the adsorptive capacity of a granular activated charcoal for phenol and O-Cresol. Masters thesis, KFUPM.

Al-Assar, Rajai Samih (1992) Numerical simulation of groundwater in the Umm Er Radhuma Aquifer at Shadco project. Masters thesis, KFUPM.

Al-Harazin, Ibrahim Muhammad (1992) Biological treatment of hazardous contaminants in sequencing batch reacors. Masters thesis, KFUPM.

Hassanain, Mostafa A. (1992) Optimal design of reinforced concrete frames. Masters thesis, KFUPM.

Hussain, Munawar (1992) Flexure and shear behaviour of damaged RC beams repaired by plate bonding. Masters thesis, KFUPM.

Waly, Hassan Aly Hassan (1992) Nonlinear behavior of cylinder-plate junction on tensionless elastic subgrade. Masters thesis, KFUPM.

civil, civil (1992) Strengthening of damaged reinforced concrete beams by external fiber glass plates. Masters thesis, KFUPM.

Ali, Maung Than Htay Akbar (1991) Factors Affecting Mercury Capillary Pressure Measurements. Masters thesis, KING FAHD UNIVERSITY OF PETROLEUM & MINERALS.

Ali, Maung Than Htay Akbar (1991) Factors affecting mercury capillary pressure measurements. Masters thesis, King Fahd University of Petroleum and Minerals.

Al-Kuhaili, Mohammad Fayyad (1991) Laser-Induced Ionization in Calcium Resonant and Non-Resonant Effects. Masters thesis, KING FAHD UNIVERSITY OF PETROLEUM & MINERALS.

Al-Kuhaili, Mohammad Fayyad (1991) Laser-induced ionization in calcium resonant and non-resonant effects. Masters thesis, King Fahd University of Petroleum and Minerals.

Lebbe, Jamaldeen M. Esuf (1991) Reliability Studies of Multi-Reservoir System Using Stochastic Approach. Masters thesis, KING FAHD UNIVERSITY OF PETROLEUM & MINERALS.

Ali, Mohammad Golam (1991) Criteria for cathodic protection of steel in concrete in the context of Arabian Gulf environment. PhD thesis, King Fahd University of Petroleum and Minerals.

Lebbe, Jamaldeen M. Esuf (1991) Reliability studies of multireservoir system using stochastic approach. Masters thesis, King Fahd University of Petroleum and Minerals.

Tawfiq, Hattan Zain Al-Abdin (1991) The Effect of Inexact Line Search On Conjugate Gradient Methods. Masters thesis, KING FAHD UNIVERSITY OF PETROLEUM & MINERALS.

Al-Assaf, Abdul-Aziz Muhammad Jaser (1991) Idean Extension of E-Bisimple Semigroup Theorems. Masters thesis, KING FAHD UNIVERSITY OF PETROLEUM & MINERALS.

Al-Assaf, Abdul-Aziz Muhammad Jaser (1991) Ideal extension of E-Bisimple semigroup theorems. Masters thesis, King Fahd University of Petroleum and Minerals.

Tawfiq, Hattan Zain Al-Abdin (1991) The effect of inexact line search on conjugate gradient methods. Masters thesis, King Fahd University of Petroleum and Minerals.

Akhtar, Mohammad Wasim (1991) Towards an Optimal Accumulator Size For the Hough Transform. Masters thesis, KING FAHD UNIVERSITY OF PETROLEUM & MINERALS.

Al-Alawi, Muhsen Ahmed Muhsen Ali (1991) Contractor Prequalification: A Computerized Model for Public Projects in Bahrain. Masters thesis, KING FAHD UNIVERSITY OF PETROLEUM & MINERALS.

Sheikheldin, Sami Yassin (1991) Chemical Analysis of Some Penicillin And Cephalosporin Drugs. Masters thesis, KING FAHD UNIVERSITY OF PETROLEUM & MINERALS.

Akhtar, Mohammad Wasim (1991) Towards an optimal accumulator size for the Hough transform. Masters thesis, King Fahd University of Petroleum and Minerals.

Al-Alawi, Muhsen Ahmed Muhsen (1991) Contractor prequalification : a computerized model for public projects in Bahrain. Masters thesis, King Fahd University of Petroleum and Minerals.

Al-Jalal, Abdul Aziz Mohammed (1991) Measurement of Differential Cross Section of 12C(d,p) Reaction at Ed = 160 to 300 keV. Masters thesis, KING FAHD UNIVERSITY OF PETROLEUM & MINERALS.

Makkawi, Mohammad Houssain (1991) Geostatistical Modelling of Zarghat Magnesite Deposit, Saudi Arabia. Masters thesis, KING FAHD UNIVERSITY OF PETROLEUM & MINERALS.

Hussain, Syed Ehtesham (1991) Mechanisms of high durability performance of plain and blended cements. PhD thesis, King Fahd University of Petroleum and Minerals.

Al-Jalal, Abdul Aziz Mohammed (1991) Measurement of differential cross section of ¹²C(d,p) reaction at E = 160 to 300 keV. Masters thesis, King Fahd University of Petroleum and Minerals.

Ismail, Taisir Hasan (1991) Null steering in phased and adaptive arrays by controlling the element positions. PhD thesis, King Fahd University of Petroleum and Minerals.

Khondaker, Abu Nasser (1991) Treatise on solute transport in porous media and its modeling for centration-dependent permeability. PhD thesis, King Fahd University of Petroleum and Minerals.

Makkawi, Mohammad Houssain (1991) Geostatistical modelling of Zarghat magnesite deposit Saudi Arabia. Masters thesis, King Fahd University of Petroleum and Minerals.

Yassin, Sheikheldin Sami (1991) Chemical analysis of some penicillin and cephalosporin drugs. Masters thesis, King Fahd University of Petroleum and Minerals.

Ahmed, Hadeel Noman Saied (1991) Thermal Insulation Economics For Saudi Residential Buildings. Masters thesis, KING FAHD UNIVERSITY OF PETROLEUM & MINERALS.

Al-Dawaish, Hussain Naser (1991) H ∞ State Feedback with Closed-Loop Transfer Recovery (H ∞ / CLTR) Design Method. Masters thesis, KING FAHD UNIVERSITY OF PETROLEUM & MINERALS.

Al-Muhaidib, Saud Mohammed (1991) A Study of Graph Coloring Heuristics And its Application to a Time Tabling Problem In a Registration and Scheduling System. Masters thesis, KING FAHD UNIVERSITY OF PETROLEUM & MINERALS.

Enamul Hoque, Abu Naser Md. (1991) Feasibility of Adobe as a Construction Material A Case Study. Masters thesis, KING FAHD UNIVERSITY OF PETROLEUM & MINERALS.

Hameed, Redwan Amin (1991) Characterization of Expansive Soils in the Eastern Province of Saudi Arabia. Masters thesis, KING FAHD UNIVERSITY OF PETROLEUM & MINERALS.

Zamel, Samer Ahmad Ibrahim (1991) Construction Cost Control in the Eastern Province of Saudi Arabia. Masters thesis, KING FAHD UNIVERSITY OF PETROLEUM & MINERALS.

Salah, Mazen Abdallah Abdul-Rahman (1991) The Development of an Intelligent Alarm Processor. Masters thesis, KING FAHD UNIVERSITY OF PETROLEUM & MINERALS.

Abbasi, Mohammed Sajid Ali (1991) Non-linear finite element modelling of reinforced concrete slabs. PhD thesis, King Fahd University of Petroleum and Minerals.

Mohammed, Majed Samhan (1991) A Laser Doppler Anemometry Study of the Development of an Initially Turbulent Flow in a Horizontal Tube. Masters thesis, KING FAHD UNIVERSITY OF PETROLEUM & MINERALS.

Ahmed, Hadeel Noman Saied (1991) Thermal insulation economics for Saudi residential buildings. Masters thesis, King Fahd University of Petroleum and Minerals.

Al-Dawaish, Hussain Naser (1991) H°° state-feedback with closed-loop transfer recovery (H°° /CLTR) design method. Masters thesis, King Fahd University of Petroleum and Minerals.

Enamul Hoque, Abu Naser Md. (1991) Feasibility of Adobe as a construction material : a case study. Masters thesis, King Fahd University of Petroleum and Minerals.

El-Hassan, El-Aaoud (1991) Flavor conserving flavor changing radiative decays of vector mesons in Quark model. Masters thesis, King Fahd University of Petroleum and Minerals.

Hameed, Redwan Amin (1991) Characerization of expansive soils in the Eastern Province of Saudi Arabia. Masters thesis, King Fahd University of Petroleum and Minerals.

Al-Muhaidib, Saud Mohammed (1991) A study of graph coloring heuristics and its application to a time tabling problem in a registration and scheduling system. Masters thesis, King Fahd University of Petroleum and Minerals.

Mohammed, Majed Samhan (1991) A laser droppler anemometry study of the development of an initially turbulent flow in a horizontal tube. Masters thesis, King Fahd University of Petroleum and Minerals.

Redwan, Mohammed Abdel-Raouf (1991) Preparation and characterization of Y Ba₂ Cu₃ 0₇ high-T superconductor. Masters thesis, King Fahd University of Petroleum and Minerals.

Salah, Mazen Abdallah Abdul-Rahman (1991) The development of an intelligent alarm processor. Masters thesis, King Fahd University of Petroleum and Minerals.

Zamel, Samer Ahmad Ibrahim (1991) Construction cost control in the Eastern Province of Saudi Arabia. Masters thesis, King Fahd University of Petroleum and Minerals.

El-Hassan, El-Aaoud (1991) Flavor Conserving Flavor Changing Radiative Decays of Vector Mesons in Quark Model. Masters thesis, KING FAHD UNIVERSITY OF PETROLEUM & MINERALS.

Limalia, Ismael Mohamed (1991) A multi-level invariant representation of digital images. Masters thesis, King Fahd University of Petroleum and Minerals.

Al-Abdullatif, Abdullatif Mohammad Hamad (1991) Systematic examination techniques for planning and scheduling among Saudi Arabian construction firms. Masters thesis, King Fahd University of Petroleum and Minerals.

Mohammed, Salahadin Adem (1991) Join algorithms for parallel computers for relations based on interpolation based grid file. Masters thesis, King Fahd University of Petroleum and Minerals.

Muhanna, Abdullah Moosa (1991) Numerical investigation of laminar natural convection flows in obstructed vertical channels. Masters thesis, King Fahd University of Petroleum and Minerals.

Hameed, Redwan Amin (1991) Characerization of expansive soils in the Eastern Province of Saudi Arabia. Masters thesis, KFUPM.

Abbasi, Mohammed Sajid Ali (1991) Non-linear finite element modelling of reinforced concrete slabs. PhD thesis, KFUPM.

Abul-Feilat, Emad Areslan (1991) Optimum design of continuous partially prestressed concrete beams. Masters thesis, KFUPM.

Ali, Mohammad Golam (1991) Criteria for cathodic protection of steel in concrete in the context of Arabian Gulf environment. PhD thesis, KFUPM.

Hussain, Syed Ehtesham (1991) Mechanisms of high durability performance of plain and blended cements. PhD thesis, KFUPM.

Lebbe, Jamaldeen M. Esuf (1991) Reliability studies of multireservoir system using stochastic approach. Masters thesis, KFUPM.

civil, civil (1991) Treatise on solute transport in porous media and its modeling for centration-dependent permeability. PhD thesis, KFUPM.

Inamah, Abu Ibrahim (1990) Unsteady state performance of porous gas-diffusion electrodes in alkaline fuel cell. Masters thesis, King Fahd University of Petroleum and Minerals.

Yaqub, Mohammed (1990) Prediction of species concentration and temperature profile in methanol oxygen and argon flame. Masters thesis, King Fahd University of Petroleum and Minerals.

Abdul-hadi, Nader Husni (1990) Factors affecting bidding and markup decisions in Saudi Arabia. Masters thesis, King Fahd University of Petroleum and Minerals.

Ahmed, Rashid Waheed Khalid (1990) Modelling of chemical kinetics of methane/nitrogen dioxide/oxygen flames. Masters thesis, King Fahd University of Petroleum and Minerals.

Najeeb, Shaik Mohammed (1990) Reliable life prediction models for various material damage processes. Masters thesis, King Fahd University of Petroleum and Minerals.

Alimuddin, Mohammad (1990) Pattern matching and applications. Masters thesis, King Fahd University of Petroleum and Minerals.

El-Nafaty, Usman Aliyu (1990) Methanol conversion to light olefins over commercial zeolites. Masters thesis, King Fahd University of Petroleum and Minerals.

Muqtar, Mohammed (1990) Cyanoketene cycloaddition reactions. Masters thesis, King Fahd University of Petroleum and Minerals.

Al-Yousef, Ali Khamis (1990) Performance of Slow Sand Filters In Treating Secondary Effluent Using Different Sizes of Local Sand. Masters thesis, KING FAHD UNIVERSITY OF PETROLEUM & MINERALS.

Al-Amer, Samir Hasan (1990) Design and simulation of digital controllers using pipelined architecture. Masters thesis, KFUPM.

Abu Al-Saud, Fathi Abd Al-Adeem (1990) Design of state feedback control laws based on reduced order models. Masters thesis, King Fahd University of Petroleum and Minerals.

Ali, Mohammed Shahjahan (1990) The Effect of high temperature and aging on water-base drilling fluids. Masters thesis, King Fahd University of Petroleum and Minerals.

Al-Farra, Ismail Mahmoud (1990) Spectral estimation based on singular value decomposition techniques. Masters thesis, King Fahd University of Petroleum and Minerals.

Bazoune, Abdelaziz (1990) Vibration frequencies of rotating tapered beam including rotary inertia and transverse shear deformation. Masters thesis, King Fahd University of Petroleum and Minerals.

Bishr, Hamoud Abdullrab Mohammed (1990) Assessment of concrete strength by lok and capo tests. Masters thesis, King Fahd University of Petroleum and Minerals.

Darhmaoui, Hassane (1990) Temperature dependent angle-resolved photoemission study of the valence bands of single crystal iridium. Masters thesis, King Fahd University of Petroleum and Minerals.

Al-Jarri, Abdul-Rahman Saleh Ali (1990) Oil compressibility correlations. Masters thesis, King Fahd University of Petroleum and Minerals.

Mimoune, Kissami (1990) The Effect of multiple fractures on the performance of gas wells. Masters thesis, King Fahd University of Petroleum and Minerals.

Al-Shafei, Mansour Ahmed (1990) High temperature ceramic superconductors: oxalate co-precipitation procedure for synthesis and influence of compositional variations. Masters thesis, King Fahd University of Petroleum and Minerals.

Al-Yousef, Ali Khamis (1990) Performance of slow sand filters in treating secondary effluent using different sizes of local sand. Masters thesis, King Fahd University of Petroleum and Minerals.

Al-Buraim, Isa Mahmoud (1990) Studying the behavior of Dhahran dune sand using the 3rd invariant stress dependent combined hardening cap model. Masters thesis, King Fahd University of Petroleum and Minerals.

Fayadh, Habib Abdul-Sater Musllam (1990) Feasibility & development of an Arabic/English computer-aided detailed estimating system. Masters thesis, King Fahd University of Petroleum and Minerals.

Al-Khaldi, Zaitoun Shadeed (1990) Factors affecting the accuracy of construction costs estimating in Saudi Arabia. Masters thesis, King Fahd University of Petroleum and Minerals.

Al-Mumen, Adib Aabdul-Muhsen (1990) The Effect of injected water salinity on oil recovery. Masters thesis, King Fahd University of Petroleum and Minerals.

Al-Musaid, Abdulziz A. (1990) The influence of owner involvement during construction process on projects quality. Masters thesis, King Fahd University of Petroleum and Minerals.

Al-Dandan, Ghaleb Baquir (1990) Radio frequency spread spectrum for distributed control systems. Masters thesis, King Fahd University of Petroleum and Minerals.

Dehwah, Hamoud Ahmad Farhan (1990) Durability of reinforced concrete beams repaired with various repair materials. Masters thesis, King Fahd University of Petroleum and Minerals.

Al-Hajji, Adnan Ahmed (1990) Nickel and vanadyl porphyrins in Arabian heavy crude oil. Masters thesis, King Fahd University of Petroleum and Minerals.

Al-Hamed, Adel Sulaiman Hamad (1990) Determining velocity, temperature and occupancy comfort within a 3-D room. Masters thesis, King Fahd University of Petroleum and Minerals.

Melhi, Mohammed Homoud (1990) A Load balancing algorithm for distributed computing systems. Masters thesis, King Fahd University of Petroleum and Minerals.

Zaidan, Mahdi Yahya (1990) Design of voiceband echo cancellers. Masters thesis, King Fahd University of Petroleum and Minerals.

Zerguine, Azzedine (1990) Design of fractionally spaced equalizers. Masters thesis, King Fahd University of Petroleum and Minerals.

Al-Amri, Ghazi Mohammed A. (1990) Laboratory evaluation of reclaimed rubber-asphaltic concrete mixes. Masters thesis, KFUPM.

Saada, Nidhal Mohammad Said (1990) Estimating flood quantiles in southwestern part of Saudi Arabia. Masters thesis, KFUPM.

civil, civil (1990) Studying the behavior of Dhahran dune sand using the 3rd invariant stress dependent combined hardening cap model. Masters thesis, KFUPM.

Al-Ustath, Ahmed (1990) Evaluation of repair materials with emphasis on crack injection repair. Masters thesis, KFUPM.

Al-Yousef, Ali Khamis (1990) Performance of slow sand filters in treating secondary effluent using different sizes of local sand. Masters thesis, KFUPM.

Ashmawi, Wayel Muhammad Al-Anwar (1990) Fracture modelling of reinforced concrete beams in mode I crack. Masters thesis, KFUPM.

Bishr, Hamoud Abdullrab Mohammed (1990) Assessment of concrete strength by lok and capo tests. Masters thesis, KFUPM.

Dehwah, Hamoud Ahmad Farhan (1990) Durability of reinforced concrete beams repaired with various repair materials. Masters thesis, KFUPM.

Al-Zahrani, Muhammad Abdullah Mesfer (1989) Status of hydrological network in south-western region of the Kingdom of Saudi Arabia. Masters thesis, King Fahd University of Petroleum and Minerals.

Shahid, Syed Muthee Ulla (1989) Second law analysis and optimization of solar hot water systems. Masters thesis, King Fahd University of Petroleum and Minerals.

Abdou, Asem Mahmoud (1989) Stratigraphical andmicrofacies analysis of some selected late cretaceous surface and subsurface sections in Arabia. Masters thesis, King Fahd University of Petroleum and Minerals.

Felemban, Mamdouh B (1989) Vibration analysis of point and column supported mindlin plates. Masters thesis, King Fahd University of Petroleum and Minerals.

Garout, Yahya Mohammad Saleh (1989) Code generation for dHAD on Vax. Masters thesis, King Fahd University of Petroleum and Minerals.

Gusti, Aiman Mustafa Mahmoud (1989) The final set of mesomorphic and entire functions. Masters thesis, King Fahd University of Petroleum and Minerals.

Hejazi, Ramzi Fouad (1989) Investigation of leachate from a sanitary landfill in Saudi Arabia. Masters thesis, King Fahd University of Petroleum and Minerals.

Al-Kilani, Abdul-Rahman Mustafa (1989) Pedestrian behavior related to accident involvement. Masters thesis, King Fahd University of Petroleum and Minerals.

Misbhauddin, Mohammed (1989) Characterization and treatment of a petrochemical wastewater for reuse. Masters thesis, King Fahd University of Petroleum and Minerals.

Al-Muraikhi, Ahmed J. (1989) Evaluation of vertical multiphase flow correlations for Saudi Arabian field conditions. Masters thesis, King Fahd University of Petroleum and Minerals.

Mohammed, Ammar Khalil Hafedh (1989) A generalized theory for bending of thick isotropic rectangular plates. PhD thesis, King Fahd University of Petroleum and Minerals.

Odeh, Hani Husni Mohammed (1989) Dynamic economic dispatch with sensitivity analysis. Masters thesis, King Fahd University of Petroleum and Minerals.

Al-Sultan, Ahmed Saleh (1989) Determination of construction contract duration for public projects in Saudi Arabia. Masters thesis, King Fahd University of Petroleum and Minerals.

Aal-e-Ali, (1989) Photoinitiated polymerization by phosphonium salts incorporating a chromophore unit. Masters thesis, King Fahd University of Petroleum and Minerals.

Ibrahim, Mohammed Abdel-Rahman (1989) Use of microtubes in the design of optimized trickle irrigation network. Masters thesis, King Fahd University of Petroleum and Minerals.

Kareem, Kaiser (1989) Load induced cracking and failure of concrete deck slabs in girder-slab type bridges. Masters thesis, King Fahd University of Petroleum and Minerals.

Khalil, Hossam Salah Eldin (1989) Performance of Epoxy-injected concrete in hot weather conditions. Masters thesis, King Fahd University of Petroleum and Minerals.

Al-Kilani, Abdul-Rahman Mustafa (1989) Pedestrian behavior related to accident involvement. Masters thesis, KFUPM.

Al-Shaikh, Abdul-Karim Mahmoud (1989) Effect of using geotextiles on behavior of Sabkaha subgrades. Masters thesis, KFUPM.

Sabir, Syed Mohammad (1989) Road traffic noise in developing countries. Masters thesis, KFUPM.

Al-Hejji, Ali Ibrahim Ali (1989) A refined theory for symmetric orthotropic laminated plates. Masters thesis, KFUPM.

Bhuiyan, Muhammed Ali Bhuiyan (1989) Collocation on irregular domains with adaptive hermite element family for transport problems. PhD thesis, KFUPM.

Gomaa, Said Taha Khalil (1989) Finite element modelling for the bending of thick plates. Masters thesis, KFUPM.

Hejazi, Ramzi Fouad (1989) Investigation of leachate from a sanitary landfill in Saudi Arabia. Masters thesis, KFUPM.

Ibrahim, Mohammed Abdel-Rahman (1989) Use of microtubes in the design of optimized trickle irrigation network. Masters thesis, KFUPM.

Misbhauddin, Mohammed (1989) Characterization and treatment of a petrochemical wastewater for reuse. Masters thesis, KFUPM.

Mohammed, Ammar Khalil Hafedh (1989) A generalized theory for bending of thick isotropic rectangular plates. PhD thesis, KFUPM.

Mousselhy, El-Sayed Abdel-Aleem (1989) Evaluation of shear behavior of ferrocement using direct shear specimen and beam specimen. Masters thesis, KFUPM.

civil, civil (1989) Status of hydrological network in south-western region of the Kingdom of Saudi Arabia. Masters thesis, KFUPM.

civil, civil (1989) Tertiary treatment of municipal sewage via slow sand filtration. Masters thesis, KFUPM.

Abbasi, Kamal Khalil Khairaddin (1989) Joint Ventures in construction firms in Saudi Arabia. Masters thesis, King Fahd University of Petroleum and Minerals.

Al-Adham, Samer Said (1989) Tertiary treatment of municipal sewage via slow sand filtration. Masters thesis, King Fahd University of Petroleum and Minerals.

Iqbal, Khan Khalid (1989) Use of latex modified concrete as a bridge deck overlay. Masters thesis, KFUPM.

Kareem, Kaiser (1989) Load induced cracking and failure of concrete deck slabs in girder-slab type bridges. Masters thesis, KFUPM.

Khalil, Hossam Salah Eldin (1989) Performance of Epoxy-injected concrete in hot weather conditions. Masters thesis, KFUPM.

Abu-Askar, Gaswarah Muhammad Dhiyab. (1989) An LPC analysis and synthesis system for Arabic speech. Masters thesis, King Fahd University of Petroleum and Minerals.

Fairag, Faisal Abdul-Karim (1989) Spectral characterization of trees. Masters thesis, King Fahd University of Petroleum and Minerals.

Abdul Ghaffar, Jalal Mohammad (1988) Concurrency in interpolation based grid files. Masters thesis, King Fahd University of Petroleum and Minerals.

Abdul Rehman, Hasan Bin (1988) Equilibrium adsorption of light alkanes and their mixtures at high pressure on 5A, 13X and S-115 adsorbents. Masters thesis, King Fahd University of Petroleum and Minerals.

Abu-Khalaf, Aziz Muhammad (1988) Hydrogen transfer cracking of Arabian vacuum residuum in tetralin. Masters thesis, King Fahd University of Petroleum and Minerals.

Ahmad, Jamil Izzat J. (1988) A retrieval and display system for the holy Quran. Masters thesis, King Fahd University of Petroleum and Minerals.

Chaudhry, Muhammad Akhtar (1988) Generation outage dynamic contingency analysis using frequency prediction. Masters thesis, King Fahd University of Petroleum and Minerals.

Damati, Ali Fiqhi (1988) A Systolic algorithm for VLSI design of a viterbi decoder. Masters thesis, King Fahd University of Petroleum and Minerals.

Ghazal, Ahmad Said. (1988) Investigation and implementation of some probabilistic algorithms. Masters thesis, King Fahd University of Petroleum and Minerals.

Ahmad, Aftab (1988) Investigations on a flat, square plate at high incidence in a low speed flow. Masters thesis, King Fahd University of Petroleum and Minerals.

Al-Furati, Khaled Muhammad (1988) Watson's Lemma with applications. Masters thesis, King Fahd University of Petroleum and Minerals.

Chowdhury, Mohammad Showkat Rahim (1988) Uppeer semicontinuous decompositions E3 into subarc's of Bing's sling and points. Masters thesis, King Fahd University of Petroleum and Minerals.

Alam, Mansoor (1988) A generalized approach to the machining economics optimization. Masters thesis, King Fahd University of Petroleum and Minerals.

Cherid, Ali Abdelkader Cherid (1988) Globally stable adaptive pole placement. PhD thesis, King Fahd University of Petroleum and Minerals.

Fazil, Syed (1988) Integral methods for transpired boundary layer flow. Masters thesis, King Fahd University of Petroleum and Minerals.

Gharbi, Habib Ben Said. (1988) Multipath fading effects on digital microwave links and countermeasures. Masters thesis, King Fahd University of Petroleum and Minerals.

Ahmad, Rafi (1988) Engineering properties and mineralogical composition of expansive clays in Al-Qatif area. Masters thesis, KFUPM.

Al-Abdul-Gader, Abdullah Hamad (1988) Parking problem of Arafat. Masters thesis, KFUPM.

Al-Gasous, Khaled Abdallah Hasan (1988) Geotechnical properties of the surfacial soil of Sanaa The Yemen Arab Republic. Masters thesis, KFUPM.

Azeemuddin, Mohammed (1988) Constitutive modelling of Dhahran dune sand using cap model. Masters thesis, kfupm.

Javed, Hasnain (1988) Effect of degree of saturation, air voids and medium of attack on the durability of asphalt concrete mixes in Jeddah. Masters thesis, KFUPM.

Khan, Ziauddin Ahmad (1988) Laboratory evaluation of local asphalt concrete mix design procedures. Masters thesis, KFUPM.

Mohammed, Niaz (1988) Effect of denitrification on dispersion of nitrate in saturated porous media. Masters thesis, KFUPM.

Nagi, Gamil Abdulrub (1988) Evaluation of slurry seal performance in the Eastern Province of Saudi Arabia. Masters thesis, KFUPM.

civil, civil (1988) Prediction of pavement rutting from laboratory characterization tests. Masters thesis, KFUPM.

civil, civil (1988) Study of laterally loaded single pile model. Masters thesis, KFUPM.

Ajward, Mohamed Hubail (1988) Dispersion of chloroform in a saturated porous media. Masters thesis, KFUPM.

Mahamud, Mohamed Muse (1988) Durability and thermal incompatibility of concrete constituents made from local materials in the Arabian Gulf Countries. Masters thesis, KFUPM.

Saleem, Mohammed (1988) Flexural behavior of ferrocement sandwich panels. Masters thesis, KFUPM.

civil, civil (1988) Study of the effect of rust and corrosion of reinforcement on bond behavior. Masters thesis, KFUPM.

civil, civil (1988) Study of the effect of rust and corrosion of reinforcemnt on bond behaviour. Masters thesis, KFUPM.

Abdullah, Medhat Kamal (1988) Analysis of horizontally curved pseudo slab type bridge deck continuous over discrete pier supports. Masters thesis, KFUPM.

Abdullah, Medhat Kamal. (1988) Analysis of horizontally curved pseudo slab type bridge deck continuous over discrete pier supports. Masters thesis, King Fahd University of Petroleum and Minerals.

Aboul-Nour, Louay Abdel-Razek (1988) Fracture and permeability characteristics of thermally degraded concrete. Masters thesis, KFUPM.

Aboul-Nour, Louay Abdel-Razek (1988) Fracture and permeability characteristics of thermally degraded concrete. Masters thesis, King Fahd University of Petroleum and Minerals.

civil, civil (1988) Study of various repair methods for reinforced concrete flexural members. Masters thesis, KFUPM.

Ahmad, Rafi (1988) Engineering properties and mineralogical composition of expansive clays in Al-Qatif area (K.S.A). Masters thesis, King Fahd University of Petroleum and Minerals.

Ajward, Mohamed Hubail (1988) Dispersion of chloroform in a saturated porous media. Masters thesis, King Fahd University of Petroleum and Minerals.

Al-Abdul-Gader, Abdullah Hamad (1988) Parking problem of Arafat. Masters thesis, King Fahd University of Petroleum and Minerals.

Aitah, Redha Amin (1988) Performance study of the lowest bidder bid awarding system in government projects - Saudi Arabia. Masters thesis, King Fahd University of Petroleum and Minerals.

Darwish, Ata Hasan (1988) Pleistocene-holocene sedimentation along King fahd Causeway between Saudi Arabia and Bahrain. Masters thesis, King Fahd University of Petroleum and Minerals.

Al-Gasous, Khaled Abdallah Hasan (1988) Geotechnical properties of the surfacial soil of Sana'a The Yemen Arab Republic. Masters thesis, King Fahd University of Petroleum and Minerals.

Gubati, Ahmad Abdul-Hamid sallam (1988) Study of various repair methods for reinforced concrete flexural members. Masters thesis, King Fahd University of Petroleum and Minerals.

Darwish, Ata Hasan (1988) Pleistocene-holocene sedimentation along King fahd Causeway between Saudi Arabia and Bahrain. Masters thesis, King Fahd University of Petroleum and Minerals.

Ahmed, Shakeel (1987) Adsorption of surfactants on Saudi Arabian limestone. Masters thesis, King Fahd University of Petroleum and Minerals.

Abu-Saleh, Muhammad Khaldoun Abdul-Gader (1987) Experiments on a flat square plate at high angles of attack. Masters thesis, King Fahd University of Petroleum and Minerals.

Fidanboylu, Kemal Mehmet. (1987) A new transformation and design technique for switched capacitor high pass ladder filters. Masters thesis, King Fahd University of Petroleum and Minerals.

Ghaffar, Faaez Mohammed. (1987) Data-flow expression evaluator for VLSI implementation. Masters thesis, King Fahd University of Petroleum and Minerals.

Ali, Mohammed Ashraf (1987) Investigation of nitrogen compound types in high-boiling petroleum distillates form Saudi Arabian crude oils. Masters thesis, King Fahd University of Petroleum and Minerals.

Ahmed, Suhail (1987) Tertiary wastewater treatment by sedimantation and sand filtration. Masters thesis, King Fahd University of Petroleum and Minerals.

Habibullah, Ibrahim Omar Ali. (1987) Power system generation reliability. Masters thesis, King Fahd University of Petroleum and Minerals.

Akhtar, Mohammad Jasim (1987) Development of guidelines for four phase traffic signal scheme in the Kingdom of Saudi Arabia. Masters thesis, KFUPM.

Al-Abdulgader, Khaled Abdulaziz Ahmad (1987) Effect of sight distance on the safety of unsignalized intersections. Masters thesis, KFUPM.

Al-Samhouri, Nedhal Fouzi (1987) A model study of slurry-trench excavation and soil-bentonite cut-off walls. Masters thesis, KFUPM.

Hasan, Syed Akhlaque (1987) Evaluation of water quality in KFUPM drinking water system. Masters thesis, KFUPM.

Jawaid, Syed Mohammad Ali (1987) Creep characteristics of local sands. Masters thesis, KFUPM.

Mitha, Sohail Anjum Abdussattar (1987) An experimental model study to investigate the effect of scale on dispersion characteristics in chlorine contact. Masters thesis, KFUPM.

Shah, Syed Mansoor (1987) Development of left-turn lane warrants for Saudi Arabia. Masters thesis, KFUPM.

civil, civil (1987) The assessment of degree of cementation in weakly to moderately cemented sands by the static cone penetrometer. Masters thesis, KFUPM.

Abukhudair, Mohammad Younis (1987) Removal of iron and manganese with ozone. Masters thesis, KFUPM.

Al-Malek, Muhammad Hasan (1987) Quality of desalinated blended seawater in Dammam. Masters thesis, KFUPM.

Al-Zahrani, Mesfer (1987) Effect of fiber reinforcement on the durability of reinforced concrete in Arabian Gulf Region. Masters thesis, KFUPM.

Bin-omar, Abdul Rahman (1987) Nonlinear finite element analysis of ferrocement beams. Masters thesis, KFUPM.

Tawabini, Bassam Shafiq (1987) Trihalomethanes (THMs) formation in a distillation process. Masters thesis, KFUPM.

civil, civil (1987) Tertiary wastewater treatment by sedimantation and sand filtration. Masters thesis, KFUPM.

Abdul-Latif, Ali ahmed. (1987) Geostatistical estimation of reserves in the Abu-Tartur phosphate deposits western desert, Egypt. Masters thesis, King Fahd University of Petroleum and Minerals.

Abdul-Muhsen, Al-ithan thamer (1987) Charge dependent effects on nuclear forces. Masters thesis, King Fahd University of Petroleum and Minerals.

Al-Abdulgader, Khaled Abdulaziz Ahmad (1987) Effect of sight distance on the safety of unsignalized intersections. Masters thesis, King Fahd University of Petroleum and Minerals.

Abukhudair, Mohammad Younis (1987) Removal of iron and manganese with ozone. Masters thesis, King Fahd University of Petroleum and Minerals.

Akhtar, Mohammad Jasim (1987) Development of guidelines for four phase traffic signal scheme in the Kingdom of Saudi Arabia. Masters thesis, King Fahd University of Petroleum and Minerals.

Al-Dulaijan, Salah Uthman (1987) Construction financing in Saudi Arabia. Masters thesis, King Fahd University of Petroleum and Minerals.

Fuseni, Alhasan Bin (1987) Phase behavior and microemulsion studies on a Saudi Arabian crude. Masters thesis, King Fahd University of Petroleum and Minerals.

Abdul-Nabi, Dawoud Yaagoub Shehadah (1986) Analytical calculation of bow shock waves from delta shaped supersonic lifting wings. Masters thesis, King Fahd University of Petroleum and Minerals.

Quddus, Abdul (1986) Heat transfer characteristics of ice solidification using a two-phase closed thermosyphon. Masters thesis, King Fahd University of Petroleum and Minerals.

Al-Halhouli, Abdul-Halim Ali (1986) Evaluation of emulsified asphalt treated sand for road bases. Masters thesis, KFUPM.

Al-Madani, Hashem Mohammad Noor (1986) Assessment of road user charges in Saudi Arabia. Masters thesis, KFUPM.

Asi, Ibrahim Muhammad (1986) Axle loads and pavement performance indicators for typical highways in Eastern Province. Masters thesis, KFUPM.

Nooru-Mohamed, Mohamed Buchary (1986) Mixed mode fracture for concrete. Masters thesis, KFUPM.

Rafeeqi, Sahibzada Farooq Ahmad (1986) Flexural behavior of ferrocement I-beams and box-beams. Masters thesis, KFUPM.

civil, civil (1986) Tertiary wastewater treatment by direct filtration. Masters thesis, KFUPM.

civil, civil (1986) Progressive fracture of reinforced deck slab in girder-slab type bridge deck. Masters thesis, KFUPM.

Al-Dulaijan, Dhiya Abdulatif. (1986) Microprocesser based analog speech Scrambler/descrambler. Masters thesis, King Fahd University of Petroleum and Minerals.

Ahmad, Jaber Shabib Salman (1985) Reduced order models for synchronous machines. Masters thesis, King Fahd University of Petroleum and Minerals.

Al-Ahmadi, Muhammad Saud (1985) Kinetic study of ethylene oxidation using silver catalyst in a Berty reactor. Masters thesis, King Fahd University of Petroleum and Minerals.

Al-Gahtani, Husain Jubran (1985) Concrete mix design for hot weather. Masters thesis, King Fahd University of Petroleum and Minerals.

Ahmed, Syed Manzoor (1985) Heat convection from a horizontal cylinder in a quiescent fluid. Masters thesis, King Fahd University of Petroleum and Minerals.

Abdul-Rahman, Kefah Muhammad (1985) Recycling of deteriorated asphalt pavements. Masters thesis, King Fahd University of Petroleum and Minerals.

Abdul-Majeed, Mohammed Arif (1985) Coherency based equivalents for long-term dynamic studies. Masters thesis, King Fahd University of Petroleum and Minerals.

Ahmed, Rana Ejaz (1985) Multiple access schemes for data communications. Masters thesis, King Fahd University of Petroleum and Minerals.

Al-Amoudi, Omar Saeed Baghabra (1985) Studies on the evaluation of permeability and corrosion resisting characteristics of Portland pozzolan concrete. Masters thesis, King Fahd University of Petroleum and Minerals.

Aiban, Saad Ali (1985) Static strength properties of artificially cemented sands. Masters thesis, King Fahd University of Petroleum and Minerals.

Al-Hafeez, Mohammed Riyad (1985) Microcomputer based interactive process identification package. Masters thesis, King Fahd University of Petroleum and Minerals.

Al-Hamoud, Saud A. Aziz (1985) Synthesis, spectroscopic studies and structure of gold (III) chloride compounds of heterocyclic N-oxide diadducts revealing short hydrogen bond. Masters thesis, King Fahd University of Petroleum and Minerals.

Garwan, Muhammad Ahmad (1985) Search for isobaric analogue states in ⁵⁷Co via the reaction⁵⁶Fe (p,y)⁵⁷Co. Masters thesis, King Fahd University of Petroleum and Minerals.

Abbasi, Asad Kamal (1985) Speaker recognition using orthogonal LPC parameters in noisy environment. Masters thesis, King Fahd University of Petroleum and Minerals.

Ali, Zulfiqar (1985) On a class of inverted distributions. Masters thesis, King Fahd University of Petroleum and Minerals.

Edrees, Ahmed Mohammed (1985) A Study of copper recovery by liquid membrane containing a chelating agent. Masters thesis, King Fahd University of Petroleum and Minerals.

Ghaled, Amin Ramadan (1985) Geological, mineralogical and geostatistical studies on Zarghat magnesite deposit, Saudi Arabia. Masters thesis, King Fahd University of Petroleum and Minerals.

Hagos, Elias Mehretab (1985) Implementation of an isolated word recognition system. Masters thesis, King Fahd University of Petroleum and Minerals.

Abdul-Rahman, Kefah Muhammad (1985) Recycling of deteriorated asphalt pavements. Masters thesis, KFUPM.

Al-Ahmadi, Hasan (1985) Evaluating policy changes using a network simulation model. Masters thesis, KFUPM.

Ansari, Nasir Husain (1985) Development of an effective patrol dispatching system for traffic police operations. Masters thesis, KFUPM.

El-Nawati, Mohamed Ibrahim (1985) Deformation of cohesionless soils under repeated loading. Masters thesis, KFUPM.

Mallick, Sayeedur Rahman (1985) Effect of vehicle dimensional characteristics on highway geometric design. Masters thesis, KFUPM.

Ratrout, Ndhal Taisir (1985) Estimating the parking demand for mosques. Masters thesis, KFUPM.

civil, civil (1985) Static strength properties of artificially cemented sands. Masters thesis, KFUPM.

civil, civil (1985) Strength of asphalt emulsion treated marl for road bases. Masters thesis, KFUPM.

civil, civil (1985) Structural evaluation of in-service asphalt pavements by deflection measurements. Masters thesis, KFUPM.

Al-Shayea, Naser Abdul-Rahman (1985) Influence of cracks on the elastic stability of columns and frames. Masters thesis, KFUPM.

Khan, Mohammad Shamim (1985) Corrosion of reinforcing steel in sulphur concrete. Masters thesis, KFUPM.

Khondaker, Abu Nasser (1985) A Variational finite element solution for the Navier-Stokes equations in two dimensions. Masters thesis, KFUPM.

Qureshy, Asif Bashir (1985) Fatigue of concrete in the presence of a crack. Masters thesis, KFUPM.

Sammour, Yousif Tawfiq (1985) A Photoelstic investigation of stress distribution in laterally loaded thin plates simulating window glass panels. Masters thesis, KFUPM.

Saqib, Mohammed Iqbal (1985) Flexural behavior of reinforced sulphur concrete beams. Masters thesis, KFUPM.

civil, civil (1985) Static analysis of horizontally curved bridge decks supported by flexible multi-girders. Masters thesis, KFUPM.

Al-Gahtani, Husain Jubran (1985) Concrete mix design for hot weather. Masters thesis, KFUPM.

civil, civil (1985) Studies on the evaluation of permeability and corrosion resisting characteristics of Portland pozzolan concrete. Masters thesis, KFUPM.

Ahmad, Syed Iftikhar (1984) The Riemann-Steiltjes integration in locally compact spaces. Masters thesis, King Fahd University of Petroleum and Minerals.

Al-Abdallah, Isam Esa Abdul-Majid (1984) Decentralized control of interconnected dynamical systems. Masters thesis, King Fahd University of Petroleum and Minerals.

Ali, Anjum (1984) On the propagation of electromagnetic waves in an inhomogeneous medium. Masters thesis, King Fahd University of Petroleum and Minerals.

Ali, Syed Ahmed (1984) Effects of hydrogen sulfide, ammonia and water on catalytic hydrogenation of propylbenzene. Masters thesis, King Fahd University of Petroleum and Minerals.

Eydatoula, Yousouf (1984) Packed-bed adsorption of phenol and 2, 4 dichlorophenoxy acetic acid on the macroreticular resin XAD-7. Masters thesis, King Fahd University of Petroleum and Minerals.

Hamad, Esam-al-Deen Zaki (1984) Comparison of binary sorption of propane and N-butane on 5A and 13X Zeolites. Masters thesis, King Fahd University of Petroleum and Minerals.

Ahmed, Mohi Uddin (1984) Stochastic approach for modeling machining process variables. Masters thesis, King Fahd University of Petroleum and Minerals.

civil, civil (1984) Static and dynamic triaxial tests on sulphur-asphalt-sand mixes. Masters thesis, KFUPM.

Al-Kurdi, Saleh Muhammad Ahmad (1984) Durability assessment criterion for concrete and reinforcement exposed to simulated environmental conditions of Saudi Arabia. Masters thesis, KFUPM.

Ziraba, Yasin Naku (1984) Material and fracture characterization of sisal fibre concrete. Masters thesis, KFUPM.

civil, civil (1984) Strength of reinforced concrete beams in hot weather. Masters thesis, KFUPM.

Al-Akhdar, Al-Saiyed Zaki S. H. (1983) Homomorphic analysis and synthesis of speech generated by an all-pole model. Masters thesis, King Fahd University of Petroleum and Minerals.

Cherid, Ali Abdel-Gader (1983) Robust decentralized L.F.C. with online iteraction trajectory improvement. Masters thesis, King Fahd University of Petroleum and Minerals.

Khan, Rizwanullah (1983) Bio-chemical treatment of saline domestic wastewater using RBCs. Masters thesis, KFUPM.

Qayyum, Tanvir Iqbal (1983) Validity and use of traffic conflict technique : a study in the Kingdom of Saudi Arabia. Masters thesis, KFUPM.

Ahmad, Mansoor (1983) Influence of Ozone bubbling activity and reaction Kinetics in Ozone-Wastewater disinfection system. Masters thesis, KFUPM.

Al-Ghamdi, Saeid Aboud (1983) Minimum weight design of nonuniform steel I-girders and columns. Masters thesis, KFUPM.

Khidir, Mohamed Ahmed (1983) Influence of transverse normal strain on finite, simply supported isotropic and orthotropic plates. Masters thesis, KFUPM.

civil, civil (1983) Sulfur infiltrated concrete box sections with poly styrene core as panel units. Masters thesis, KFUPM.

Akhtar, Shakil (1982) Software reliability modelling and evaluation via Markov and semi-Markov processes. Masters thesis, King Fahd University of Petroleum and Minerals.

Al-Gadhib, Ali Husain (1982) The Influence function technique in the numerical analysis of plate bending of arbitrary plan form. Masters thesis, King Fahd University of Petroleum and Minerals.

Abu-Salhah, Nudhal Abdul-Razzag (1982) Buckling of multiple braced columns. Masters thesis, King Fahd University of Petroleum and Minerals.

Ahmad, Syed Zafar (1982) Analysis of turbulent, axisymmetric, dense jets discharged to quiescent, uniform or stratified ambients. Masters thesis, King Fahd University of Petroleum and Minerals.

Bukhari, Sameer Abdulelah (1982) Design and analysis of the automated meteorological system for the Kingdom of Saudi Arabia. Masters thesis, King Fahd University of Petroleum and Minerals.

Al-Abdul-Hadi, Salman Saleh (1982) Electrical resistivity of concrete in relation to corrosion of reinforcement. Masters thesis, King Fahd University of Petroleum and Minerals.

Ali, Syed Qudrath (1982) A Study of development and performance of sulphur-based construction blocks. Masters thesis, King Fahd University of Petroleum and Minerals.

Fattah, Uthman Abdullatif (1982) Design of solarimeter. Masters thesis, King Fahd University of Petroleum and Minerals.

Al-Barrak, Saleh A. (1982) Improving water resistance of asphalt concrete in Saudi Arabia. Masters thesis, KFUPM.

Al-Khaldi, Hamad Thawab (1982) Drivers' attitudes and their relationship to accident involvement in Saudi Arabia. Masters thesis, KFUPM.

Hanif, Mohammad (1982) Performance of pozzolan cement concrete in a high chloride-sulphate environment. Masters thesis, KFUPM.

Waseem, Mohammed (1982) Optimization of concrete mix design using a statistical approach. Masters thesis, KFUPM.

civil, civil (1982) Stability analysis of orthotropic plates by a mixed complementary energy method. Masters thesis, KFUPM.

Abu-Salhah, Nudhal Abdul-Razzag (1982) Buckling of multiple braced columns. Masters thesis, KFUPM.

Al-Abdul-Hadi, Salman Saleh (1982) Electrical resistivity of concrete in relation to corrosion of reinforcement. Masters thesis, KFUPM.

Ali, Syed Qudrath (1982) A Study of development and performance of sulphur-based construction blocks. Masters thesis, KFUPM.

civil, civil (1982) The Influence function technique in the numerical analysis of plate bending of arbitrary plan form. Masters thesis, KFUPM.

Al-Abdulwahhab, Hamad I. (1981) The effects of baghouse fines and mineral fillers on asphalt mix properties in the Eastern Province of Saudi Arabia. Masters thesis, King Fahd University of Petroleum and Minerals.

Abu-Khamsin, Sidqi A. (1981) Measurements on wall turbulence. Masters thesis, King Fahd University of Petroleum and Minerals.

Abu-Safiya, Abdul Sami'e Muhammad (1981) Spectral representation of the love wave operator. Masters thesis, King Fahd University of Petroleum and Minerals.

Al-Nassar, Yaagoub Nassar (1981) Effect of speed control humps on vehicle dynamics. Masters thesis, King Fahd University of Petroleum and Minerals.

Rahman, Faizur (1981) Two dimensional mathematical model of evacuated tubular solar collector. Masters thesis, King Fahd University of Petroleum and Minerals.

civil, civil (1981) The effects of baghouse fines and mineral fillers on asphalt mix properties in the Eastern Province of Saudi Arabia. Masters thesis, KFUPM.

Khan, Asfahan Ullah (1981) An Investigation of properties of concrete made with concrete rubble as aggregate. Masters thesis, KFUPM.

Khathlan, Abdul-Rahman (1981) Computation of lateral-torsional buckling loads for nonprismatic beam-columns. Masters thesis, KFUPM.

Maslehuddin, Mohammed (1981) Optimizaiton of concrete mix design for durability in the Estern Province of Saudi Arabia. Masters thesis, KFUPM.

Al-Gahtani, Ahmad Saad (1981) An Investigation of corrosion of steel reinforcement in concrete in the Eastern Province of Saudi Arabia. Masters thesis, KFUPM.

Al-Saadoun, Saadoun Saad (1980) A Three-dimensional photoelastic investigation of the stress distribution in the anchorage zone of post-tensioned beams. Masters thesis, King Fahd University of Petroleum and Minerals.

Gaddourah, Mousa Isa (1980) Microcomputer control system for programmable logic array burn-in. Masters thesis, King Fahd University of Petroleum and Minerals.

Elahi, Hazm anwar (1980) A Study on the performance of delta modulation systems. Masters thesis, King Fahd University of Petroleum and Minerals.

Hamid, Syed Halim (1980) Dearomatization of naphtha cuts from Saudi Arabian crudes using different selective solvents. Masters thesis, King Fahd University of Petroleum and Minerals.

Amin, Ahmed Moeness M. G. (1980) The Applications of microcomputers for vehicular traffic control. Masters thesis, King Fahd University of Petroleum and Minerals.

Sayed-Ahmad, Muhammad Hamdi Mustafa (1980) Environmental considerations in planning of urban areas - a case study of Dammam-Khobar-Dhahran area. Masters thesis, KFUPM.

Al-Musallam, Abdallah Abdul-Karim (1980) A Photoelastic investigation of the stress distribution in the anchorage zones of post-tensioned concrete slabs. Masters thesis, KFUPM.

Hammad, Samir Hamid (1980) Application of modified Reissner theory to sandwich plates. Masters thesis, KFUPM.

Al-Saadoun, Saadoun Saad (1980) A Three-dimensional photoelastic investigation of the stress distribution in the anchorage zone of post-tensioned beams. Masters thesis, KFUPM.

Abdel-Rahman, Ali A. N. (1979) Hardware digital protection. Masters thesis, King Fahd University of Petroleum and Minerals.

Abdullah, Anwar Saeed (1979) Peak load forecast for Saudi Arabia electric power generation, 1978-2000. Masters thesis, King Fahd University of Petroleum and Minerals.

Al-Farayedhi, Abdulghani Abdallah (1979) A Comoputer-assisted analysis for thermodynamic processes and cycles. Masters thesis, King Fahd University of Petroleum and Minerals.

Al-Mustafa, Riyadh Ahmed (1979) Biparabolic isoparametric shell element : (a version of Ahmad element). Masters thesis, King Fahd University of Petroleum and Minerals.

Al-Dharrab, Ahmad Abdulaziz (1979) Elementary divisors over rings. Masters thesis, King Fahd University of Petroleum and Minerals.

Balawi, Hesham Muhammad (1979) Uncertainty analysis in shear strength of soils and its application to stability of slope problems. Masters thesis, KFUPM.

Al-Sayed, Ahmed Helmi (1979) Effect of the rigidity of columns and the dimensional changes in beams on post-tensioning forces. Masters thesis, KFUPM.

Al-Senan, Shukri Hasan (1979) Economic proportioning of continuous steel I - beam. Masters thesis, KFUPM.

Khojah, Abdallah Abdul-Adhim (1979) Approximate techniques towards solutions of Reissner plates. Masters thesis, KFUPM.

Moyeenul, Haque (1979) A Photoelastic investigation of stress distribution in deep beams with an without web opening. Masters thesis, KFUPM.

Said, Faisal Muhammad-Hasan (1979) Increased runoff through reduced infiltration in Saudi Arabia. Masters thesis, KFUPM.

Al-Rugaib, Muhammad Hamad (1978) Optimization of Concrete strength using local aggregates from the Eastern Province of Saudi Arabia. Masters thesis, King Fahd University of Petroleum and Minerals.

Abu-Zayd, Isam T. (1978) On Gleason spaces. Masters thesis, King Fahd University of Petroleum and Minerals.

Al-Sabah, Walid S. (1978) A Robust univariate procedure for testing symmetry and normality. Masters thesis, King Fahd University of Petroleum and Minerals.

Kamal, Ghassan Nashat (1978) Analysis of multi girder short span highway bridges. Masters thesis, KFUPM.

Sharaf, Amin Hussain (1978) Investigation into the modulus of elasticity of concrete. Masters thesis, KFUPM.

Yusuf, Abdul Karim (1978) Feasibility of biological nitrification process for treatment of fertilizer industry water. Masters thesis, KFUPM.

Al-Rugaib, Muhammad Hamad (1978) Optimization of Concrete strength using local aggregates from the Eastern Province of Saudi Arabia. Masters thesis, KFUPM.

Abdul-Jauwad, Samir Husain (1976) Theoretical study of lattice solitons in nonlinear lumped networks. Masters thesis, King Fahd University of Petroleum and Minerals.

Abdallah, Yousef A. Ghaffar (1976) Tooth tip losses in external gear pumps. Masters thesis, King Fahd University of Petroleum and Minerals.

Hasanain, Ghazi Saleh (1976) Finite beams on an elastic foundation. Masters thesis, KFUPM.

Dawoud, Uthman M. (1975) Corrosion of steel in the Arabian environment. Masters thesis, King Fahd University of Petroleum and Minerals.

civil, civil (1975) Strain survey on a small plate with a circular hole in the center. Masters thesis, KFUPM.

Zahur, Manzoor (1971) Air separation on carbon molecular sieves, 4A and 5A zeolites by pressure swing adsorption. Masters thesis, King Fahd University of Petroleum and Minerals.

Al-Dhamen, Mohammad (0015) NEW MODELS FOR ESTIMATING THE DEW-POINT PRESSURE OF GAS CONDENSATE RESERVOIRS. Masters thesis, King Fahd University of Petroleum and Minerals.

Al-Dhaher, Khaled W. (0011) Performance modeling of a computer system Saudi Arabian Ministry of Interior online system. Masters thesis, King Fahd University of Petroleum and Minerals.

Al-Suwaiyan, Muhammad Saleh. (0007) Progressive fracture of reinforced deck slab in girder-slab type bridge deck. Masters thesis, King Fahd University of Petroleum and Minerals.

Shakil,, Muhammad (0007) Inferential sensing techniques in industrial applications. Masters thesis, KingFahd UNiversity of Petroleum and Minerals.

l Test for Thesis 1. Masters thesis, King Fahd University of Petroleum and Minerals.

l MULTI-OBJECTIVE OPTIMIZATION MODELS FOR PROCESS TARGETING. Masters thesis, King Fahd University of Petroleum and Minerals.

l SYNTHESIS AND CHARACTERIZATION OF ACTIVATED CARBON PREPARED FROM PALM SEEDS AND APPLICATIONS FOR 4- CHLOROPHENOL REMOVAL FROM AQUEOUS SOLUTION. Masters thesis, King Fahd University of Petroleum and Minerals.

l TRACKING ANALYSIS OF C -NLMS AND LEAKY C-NLMS ALGORITHMS FOR COLORED GAUSSIAN INPUTS. Masters thesis, King Fahd University of Petroleum and Minerals.

l Hydrodesulfurization of Benzothiophene and Dibenzothiophenes over Phosphorus modified CoMo/Al2O3. Masters thesis, King Fahd University of Petroleum and Minerals.

l EXPERIMENTAL AND NUMERICAL STUDY OF THE ENHANCEMENT PARAMETERS ON A DOUBLE SLOPE SOLAR STILL PRODUCTIVITY. Masters thesis, King Fahd University of Petroleum and Minerals.

l WELL-POSEDNESS FOR A CAUCHY FRACTIONAL DIFFERENTIAL PROBLEM WITH HILFER TYPE FRACTIONAL DERIVATIVE. Masters thesis, King Fahd University of Petroleum and Minerals.

l MODELING OF THERMAL PERFORMANCE OF LIQUID FLOW WITH NANOSIZED PARTICLES OF PHASE CHANGE MATERIAL IN MICROCHANNELS. Masters thesis, King Fahd University of Petroleum and Minerals.

l Prediction of Mobility Profile with Minimum Real Time Measurements using Artificial Intelligence. Masters thesis, King Fahd University of Petroleum and Minerals.

l Laser Melting of a Moving Slab in Relation to Surface Treatment Application. Masters thesis, King Fahd University of Petroleum and Minerals.

l Abdulla F. AL-Dossary (2011) INVESTIGATION OF POOR CEMENTING BEHIND OIL WELL CASING BETWEEN ARAB-C AND D FORMATIONS IN UTHMANYIA. Masters thesis, King Fahd University of Petroleum and Minerals.

l MODELING AND ANALYSIS OF HYBRID PV/WIND OFF GRID POWER GENERATION SYSTEM IN THE KINGDOM OF SAUDI ARABIA. Masters thesis, King Fahd University of Petroleum and Minerals.

l Preconditioning Techniques for Saddle Point Problems. Masters thesis, King Fahd University of Petroleum and Minerals.

l ASSESSMENT OF EFFECTIVE R-VALUE OF BUILDING ENVELOPE USING HIGH DEFINITION THERMAL IMAGING TECHNIQUE. Masters thesis, King Fahd University of Petroleum and Minerals.

l A bilinear Kalman filter, a bilinear Kalman smoother, and a bilinear EM algorithm, with applications to Lotka-Volterra model. PhD thesis, King Fahd University of Petroleum and Minerals.

l AN INTERVAL KALMAN FILTER, INTERVAL EM ALGORITHM WITH APPLICATION TO WEATHER PREDICTION. PhD thesis, King Fahd University of Petroleum and Minerals.

l Internet Denial by Higher-tier ISPs: A NAT-Based Solution. Masters thesis, King Fahd University of Petroleum and Minerals.

l Wall Compensation for High Resolution Ultra-wideband Obstructed Localization. Masters thesis, King Fahd University of Petroleum and Minerals.

l EXPERIMENTAL INVESTIGATION OF HEAT TRANSFER CHARACTERIZATION FOR CNT-NANOFLUID IN HEAT EXCHANGERS. Masters thesis, King Fahd University of Petroleum and Minerals.

l Boundary Control of Parabolic PDEs. Masters thesis, King Fahd University of Petroleum and Minerals.

l On Noether Symmetries and Conservation Laws. Masters thesis, King Fahd University of Petroleum and Minerals.

l Evaluation of Drilling Designs for Smart MRC Wells Applied in Saudi Aramco. Masters thesis, King Fahd University of Petroleum and Minerals.

l Assessing the Use of Local Indigenous Microorganisms for the Bioremediation of Sites Contaminated With Petroleum Hydrocarbons. Masters thesis, King Fahd University of Petroleum and Minerals.

l Development of a Continuously Operated Solar Powered Refrigeration System. Masters thesis, King Fahd University of Petroleum and Minerals.

l Performance Evaluation of Seawater Counter Flow Cooling Towers. Masters thesis, King Fahd University of Petroleum and Minerals.

l CHARACTERIZATION OF AN ULTRA-HIGH PERFORMANCE CONCRETE. Masters thesis, King Fahd University of Petroleum and Minerals.

l Analysis of the Effectiveness of Complexity Measures in Component-Based Integration Testing. Masters thesis, King Fahd University of Petroleum and Minerals.

l SYNTHESIS OF CARBON NANOTUBES BY ORIFICE-CHEMICAL VAPOR DEPOSITION REACTOR AND APPLICATIONS IN STYRENE POLYMERIZATION AND NANOCOMPOSITES. PhD thesis, King Fahd University of Petroleum and Minerals.

l Aspects of Permian Paleowind Directions in the Unayzah A Reservoir Subsurface Eastern Central Saudi Arabia Utilizing Integrated Core and Image Log Data. Masters thesis, King Fahd University of Petroleum and Minerals.

l A MODEL–BASED STUDY OF A CURVED AND SKEWED SLAB TYPE BRIDGE DECK USED IN MAKKAH. Masters thesis, King Fahd University of Petroleum and Minerals.

l Electro-coagulation Treatment of Process Wastewater Produced from Water-Based Paint Industry. Masters thesis, King Fahd University of Petroleum and Minerals.

l Design and Fabrication of a MIMO Antenna System for 4G Wireless Handsets. Masters thesis, King Fahd University of Petroleum and Minerals.

l Bazzoni-Glaz Conjecture on the Weak Global Dimension of Gaussian Rings. Masters thesis, King Fahd University of Petroleum and Minerals.

l Coordinate Search Method to Optimize Heat Flow on a Constructal Disc. Masters thesis, King Fahd University of Petroleum and Minerals.

l Multithreaded Processor Core Optimized for Parallel Thread Execution. Masters thesis, King Fahd University of Petroleum and Minerals.

l REMOVAL OF HEXAVALENT CHROMIUM AND CADMIUM FROM WATER USING CARBON BASED ADSORBENTS. PhD thesis, King Fahd University of Petroleum and Minerals.

l EVOLUTIONARY OPTIMIZED HYBRID COMPUTATIONAL INTELLIGENCE MODEL FOR THE PREDICTION OF GAS COMPONENT. Masters thesis, King Fahd University of Petroleum and Minerals.

l Group Classification and Symmetry Reductions for a Class of Nonlinear Poisson Equations on the Line and Certain Surfaces. Masters thesis, King Fahd University of Petroleum and Minerals.

l Quantitative Assessment of Disinfection By-products Formed by Chlorine, Chlorine Dioxide and Ozone in Saudi Arabia Drinking Water. Masters thesis, King Fahd University of Petroleum and Minerals.

l DESIGN OF ON-LINE DECIMAL MULTIPLIER. Masters thesis, King Fahd University of Petroleum and Minerals.

l NOVEL METHOD USING NANOMATERIALS FOR REMOVAL OF E. COLI BACTERIA FROM WATER. Masters thesis, King Fahd University of Petroleum and Minerals.

l MOVEMENT-ASSISTED AND APPLICATION-AWARE CONNECTIVITY RESTORATION IN WIRELESS SENSOR-ACTOR NETWORKS. Masters thesis, King Fahd University of Petroleum and Minerals.

l THE ROLE & IMPORTANCE OF COMPONENT DOCUMENTATION IN COMPONENT INTEGRATION PHASE: A SYSTEM INTEGRATOR’S PERSPECTIVE. Masters thesis, King Fahd University of Petroleum and Minerals.

l Writer Identification of Arabic Handwritten Documents. PhD thesis, King Fahd University of Petroleum and Minerals.

l Nonlinear Propagation of Surface Plasmon-Polaritons in Chalcogenide Glass. Masters thesis, King Fahd University of Petroleum and Minerals.

l Laboratory Evaluation of Acid Diversion by Viscoelastic Surfactant in Carbonate Reservoirs. Masters thesis, King Fahd University of Petroleum and Minerals.

l Single Asymmetric Error Correcting Codes: Improved Code Size. Masters thesis, King Fahd University of Petroleum and Minerals.

l Simulation of Chloride Transport in Concrete with Stress Induced Damage. PhD thesis, King Fahd University of Petroleum and Minerals.

l Performance Analysis of Real-Time Publish/Subscribe (RTPS) Middleware for Sensor Networks. Masters thesis, King Fahd University of Petroleum and Minerals.

l VARIOUS MATHEMATICAL PROPERTIES OF THE GENERALIZED INCOMPLETE GAMMA FUNCTIONS WITH APPLICATIONS. PhD thesis, King Fahd University of Petroleum and Minerals.

l Optimal Feature Selection Using Mutual Information for Speech Recognition at Low SNR. Masters thesis, King Fahd University of Petroleum and Minerals.

l Flow Patterns of Oil-Water in Production Pipelines and Effect of Internal Turbulators. Masters thesis, King Fahd University of Petroleum and Minerals.

l Development of Methanol Electro-oxidation Catalysts for Direct Methanol Fuel Cell Application. PhD thesis, King Fahd University of Petroleum and Minerals.

l DYNAMIC ANALYSIS AND CONTROL OF MICROGRIDS. PhD thesis, King Fahd University of Petroleum and Minerals.

l Electrochemical and Gravimetric Studies towards Service-Life Prediction and Durability-based Design of RC Structures in Corrosive Environments. Masters thesis, King Fahd University of Petroleum and Minerals.

l Resolving the Cycle Skip Introduced by the Multi-Layer Static Model using a Hybrid Approach. Masters thesis, King Fahd University of Petroleum and Minerals.

l Distributed Estimation over Adaptive Networks. PhD thesis, King Fahd University of Petroleum and Minerals.

l HIERARCHAL CLUSTERING ALGORITHM FOR LARGE XML DATA. Masters thesis, King Fahd University of Petroleum and Minerals.

l The Impact of Power Quality on Industrial Product: “Steel Plant AC - EAF Case Study”. Masters thesis, King Fahd University of Petroleum and Minerals.

l Time of Arrival Estimation and Channel Identification in UWB Systems. Masters thesis, King Fahd University of Petroleum and Minerals.

l A Study of Amidoamines as Inhibitors For Mild Steel Corrosion in Saline Media Saturated with Carbon Dioxide. Masters thesis, King Fahd University of Petroleum and Minerals.

l ethylbenzene dehydrogenation to styrene over mesoporous mixed oxide catalysts- synthesis, characterization and kinetic modeling. Masters thesis, King Fahd University of Petroleum and Minerals.

l Degradation Mechanisms of Thermal Barrier Coatings Used in Land-Based Gas Turbine Blades Exposed to Low-Grade Fuel Impurities. Masters thesis, King Fahd University of Petroleum and Minerals.

l Environmental Assessment of Groundwater Condition in Tarout Island, Eastern Province of Saudi Arabia. Masters thesis, King Fahd University of Petroleum and Minerals.

l Polymerization of Ethylene using Metallocene and Zeigler Natta catalyst with doped-Nanotitania. Masters thesis, King Fahd University of Petroleum and Minerals.

l TRANSPORT PROPERTIES OF GASES IN POLYETHYLENE/CLAY NANOCOMPOSITES. Masters thesis, King Fahd University of Petroleum and Minerals.

l FUSION OF ECG/EEG FOR IMPROVED AUTOMATIC SEIZURE DETECTION USING DEMPSTER-SHAFER THEORY OF EVIDENCE. Masters thesis, King Fahd University of Petroleum and Minerals.

l Managing Risk and Resilience in Supply Chain & 3PL: Conceptual Developments and Proposed Frameworks. Masters thesis, King Fahd University of Petroleum and Minerals.

l Fluid Flow and Entropy Generation through a Throttling Valve. Masters thesis, King Fahd University of Petroleum and Minerals.

l A Compressed Sensing Approach to Channel Estimation in Impulse-Radio Ultra-Wideband (IR-UWB) Communication. Masters thesis, King Fahd University of Petroleum and Minerals.

l PROCESSABILITY AND INSTABILITIES OF POLYOLEFINORGANOCLAY NANOCOMPOSITES IN A SINGLE SCREW EXTRUDER. PhD thesis, King Fahd University of Petroleum and Minerals.

l Study on Segregation and Rheology of Self Compacting Concrete. Masters thesis, King Fahd University of Petroleum and Minerals.

l Sequence Stratigraphy of Arab C Carbonates in Khursaniyah Field, Eastern Saudi Arabia. Masters thesis, King Fahd University of Petroleum and Minerals.

l SYNTHESIS AND CHARACTERIZATION OF CARBON NANOTUBE-BASED COMPOSITES AND THEIR APPLICATIONS FOR WATER TREATMENT. PhD thesis, King Fahd University of Petroleum and Minerals.

l DESIGN &FABRICATION OF TWO SEATED AIRCRAFT WITH AN ADVANCED ROTATING LEADING EDGE WING. Masters thesis, King Fahd University of Petroleum and Minerals.

l DRILLING RIG SCHEDULE OPTIMIZATION. Masters thesis, King Fahd University of Petroleum and Minerals.

l ASSESSMENT OF SITE SELECTION CRITERIA FOR OFFICE BUILDINGS IN SAUDI ARABIA. Masters thesis, King Fahd University of Petroleum and Minerals.

l DEVELOPMENT OF MULTI-LAYERED GRADIENT CERAMIC MEMBRANE. Masters thesis, King Fahd University of Petroleum and Minerals.

l THE IMPACT OF ROCK TYPES ON ELECTRICAL PROPERTIES AND RESERVOIR FLUID SATURATION. Masters thesis, King Fahd University of Petroleum and Minerals.

l Benchmarking Maintenance Systems in Procter and Gamble. Masters thesis, King Fahd University of Petroleum and Minerals.

l Optimal Control of Singular Differential Systems. PhD thesis, King Fahd University of Petroleum and Minerals.

l Strategic Bidding for Load Serving Entity in Electricity Markets. Masters thesis, King Fahd University of Petroleum and Minerals.

l Effects of functionalized carbon nanotubes with surfactants on the mechanical and thermal properties of High Density Polyethylene (HDPE)nanocomposites. Masters thesis, King Fahd University of Petroleum and Minerals.

l Developing analytical methods for some additives and studying their behavior in mineral insulating oils. PhD thesis, King Fahd University of Petroleum and Minerals.

l ANALYTICAL METHODS DEVELOPMENT FOR THE ANALYSES OF ORGANO-METALLIC AND ORGANIC MICRO-CONTAMINANTS IN ENVIRONMENTAL MATRICES. PhD thesis, King Fahd University of Petroleum and Minerals.

l ON THE PRACTICAL IMPLEMENTATION OF COMPRESSIVE SENSING TO ULTRA WIDEBAND CHANNELS. Masters thesis, King Fahd University of Petroleum and Minerals.

l Modeling AND Optimization OF A Hybrid Solar Combined Cycle (HYCS). Masters thesis, King Fahd University of Petroleum and Minerals.

l MULTI-PHYSICS MODELING OF PHOTOVOLTAIC MODULES AND ARRAYS WITH AUXILIARY THERMAL COLLECTORS. Masters thesis, King Fahd University of Petroleum and Minerals.

l DEVELOPMENT OF AN ENVIRONMENT-FRIENDLY OIL-BASED MUD USING CANOLA OIL. Masters thesis, King Fahd University of Petroleum and Minerals.

l Computer-Aided Modeling and Simulation of Flow of Self Compacting Concrete. Masters thesis, King Fahd University of Petroleum and Minerals.

l Acoustic Noise Control Using Multiple Expansion Chambers. Masters thesis, King Fahd University of Petroleum and Minerals.

l Design and Performance Evaluation of An Adaptive Resource Allocation Scheme for MIMO-OFDMA Systems with Fairness Constraint. Masters thesis, King Fahd University of Petroleum and Minerals.

l PERFORMANCE ANALYSES OF VOIP OVER IEEE 802.16 BE CLASS. Masters thesis, King Fahd University of Petroleum and Minerals.

l Optimization of Sensors Deployment in a 3D-Environment Under the Coverage, Connectivity and Energy Consumption Constraints. Masters thesis, King Fahd University of Petroleum and Minerals.

l Planning and optimization for an Oil Refinery with NOx Reduction. Masters thesis, King Fahd University of Petroleum and Minerals.

l FRAMEWORK AND IMPLEMENTATION FOR DIALOG BASED ARABIC SPEECH RECOGNITION. Masters thesis, King Fahd University of Petroleum and Minerals.

l Balancing of Flexible Rotors at Low Speed. Masters thesis, King Fahd University of Petroleum and Minerals.

l SELF COMPACTING CONCRETE UTILIZING LOCAL MATERIALS. Masters thesis, King Fahd University of Petroleum and Minerals.

l Active Plasmonics: Surface Plasmon Polariton modulation. Masters thesis, King Fahd University of Petroleum and Minerals.

l PRODUCTION OF MEDIUM TO LOW STRENGTH CONCRETE UTILIZING INDIGENOUS WASTE PRODUCTS. Masters thesis, King Fahd University of Petroleum and Minerals.

l English to Arabic Machine Translation Using a Phrase-based Approach. Masters thesis, King Fahd University of Petroleum and Minerals.

l Prototyping and Evaluating BGP-Based Solutions to Overcome Malicious IISP Blocking. Masters thesis, King Fahd University of Petroleum and Minerals.

l ON A TUMOR MONITORING EQUATION. Masters thesis, King Fahd University of Petroleum and Minerals.

l Quantitative Assessments of Land Reclamation along the East Coast of Saudi Arabia. Masters thesis, King Fahd University of Petroleum and Minerals.

l Synthesis and Charactrization of Activated Carbon Prepared from Palm Seeds and Applications for 4-Chlorophenol Removal from Aqeoues Solution. Masters thesis, King Fahd University of Petroleum and Minerals.

l CONTENT-BASED RETRIEVAL OF ARABIC HISTORICAL MANUSCRIPTS USING LATENT SEMANTIC INDEXING. Masters thesis, King Fahd University of Petroleum and Minerals.

l UTILIZING DATA-DRIVEN AND KNOWLEDGE-BASED TECHNIQUES TO ENHANCE ARABIC SPEECH RECOGNITION. PhD thesis, King Fahd University of Petroleum and Minerals.

l Resource Management for OFDMA Systems Using Ant Colony-based Optimization Technique. Masters thesis, King Fahd University of Petroleum and Minerals.

l Adopting QoS Real-Time DCPS Models and Other Reliability Measures on High Performance and Grid Computing. PhD thesis, King Fahd University of Petroleum and Minerals.

l INTEGRATING PRODUCTION AND MAINTENANCE SCHEDULING UNDER STOCHASTIC PRODUCTION CONDITIONS. PhD thesis, King Fahd University of Petroleum and Minerals.

l OPTIMAL POWER AND SUBCARRIER ALLOCATIONS FOR OFDMA SYSTEMS. Masters thesis, King Fahd University of Petroleum and Minerals.

l Performance Analysis of Oxygen Transport Reactors Utilizing Ion Transport Membranes. Masters thesis, King Fahd University of Petroleum and Minerals.

l DEVELOPMENT OF A SETUP FOR IN-SITU MEASUREMENT OF REINFORCEMENT CORROSION. Masters thesis, King Fahd University of Petroleum and Minerals.

l PREDICTION OF PRESSURE DROP FOR TWO-PHASE FLOW IN VERTICAL PIPES USING ARTIFICIAL INTELLIGENCE. Masters thesis, King Fahd University of Petroleum and Minerals.

l PRESSURE TRANSIENT ANALYSIS OF DATA FROM PERMANENT DOWNHOLE GAUGES. Masters thesis, King Fahd University of Petroleum and Minerals.

l Electrochemical Impedance Spectroscopy using High Order Statistics Deconvolution and Adaptive Filtering Algorithms. Masters thesis, King Fahd University of Petroleum and Minerals.

l INDEPENDENT DOMINATION IN ODD GRAPHS. Masters thesis, King Fahd University of Petroleum and Minerals.

l WiMAX Cross Layer Capacity Optimization. Masters thesis, King Fahd University of Petroleum and Minerals.

l Multivariable Control of a Drum type Boiler. Masters thesis, King Fahd University of Petroleum and Minerals.

l Authentication for Stateless Address Allocation in IPv6 Networks. Masters thesis, King Fahd University of Petroleum and Minerals.

l SYNTHESIS OF SOFT ERROR TOLERANT COMBINATIONAL CIRCUITS. Masters thesis, King Fahd University of Petroleum and Minerals.

l CULTURING, ISOLATION AND GENETIC IDENTIFICATION OF ENDOLITHIC CYANOBACTERIA FOUND IN THE ARABIAN GULF. Masters thesis, King Fahd University of Petroleum and Minerals.

l On the Extension of the Bessel Functions of the First Kind with Applications to some Mathematical Integrals and Transforms. PhD thesis, King Fahd University of Petroleum and Minerals.

l Spell Checking and Correction for Arabic Text Recognition. Masters thesis, King Fahd University of Petroleum and Minerals.

l GLOBAL STABILIZATION OF DECENTRALIZED CONTROL SYSTEMS SUBJECT TO SATURATION. Masters thesis, King Fahd University of Petroleum and Minerals.

l Development and Characterization of Carbon Nanotubes (CNTs) And Silicon Carbide (SiC) Reinforced Al-based Nanocomposites. Masters thesis, King Fahd University of Petroleum and Minerals.

l APPLICATION OF POLYELECTROLYTE MULTILAYER REVERSE OSMOSIS MEMBRANE IN SEAWATER DESALINATION. PhD thesis, King Fahd University of Petroleum and Minerals.

l Residential Saudi Load Forecasting Using Analytical Model and Artificial Neural Networks. Masters thesis, King Fahd University of Petroleum and Minerals.

l AN INTEGRATED MODEL FOR THE ECONOMIC MANUFACTURING QUANTITY AND PROCESS TARGET UNDER IMPERFECT QUALITY AND INSPECTION SYSTEM. Masters thesis, King Fahd University of Petroleum and Minerals.

l IMPROVING QUALITY AND PRODUCTIVITY OF CASTING PROCESS BY USING ADVANCED SIMULATION AND RAPID PROTOTYPING TECHNOLOGY. Masters thesis, King Fahd University of Petroleum and Minerals.

l ELECTROCHEMICAL REDUCTION OF CARBON DIOXIDE ON OXIDES OF TIN AND NICKEL. Masters thesis, King Fahd University of Petroleum and Minerals.

l INTEGRATED UNIFIED MODELING LANGUAGE (IUML). Masters thesis, King Fahd University of Petroleum and Minerals.

l SYNTHESIS AND WEAR BEHAVIOR OF ALUMINUM 6061 ALLOY REINFORCED WITH CARBON NANOTUBES. Masters thesis, King Fahd University of Petroleum and Minerals.

l INFLUENCE OF CARBON NANOTUBES (CNT) ON THE MECHANICAL PROPERTIES OF THE POLYETHYLENE THERAPHTHALATE (PET)/CNT NANOCOMPOSITE FIBERS. Masters thesis, King Fahd University of Petroleum and Minerals.

l SPECTRUM SENSING USING SUB-NYQUIST RATE SAMPLING. Masters thesis, King Fahd University of Petroleum and Minerals.

l Mining Frequent Structural Patterns from XML Datasets. Masters thesis, King Fahd University of Petroleum and Minerals.

l A FRAMEWORK FOR THE INVOLVEMENT OF THE MAINTENANCE MANAGER DURING THE DESIGN DEVELOPMENT AND REVIEW STAGES. Masters thesis, King Fahd University of Petroleum and Minerals.

l REAL-TIME ANGER DETECTION IN ARABIC SPEECH DIALOGS. Masters thesis, King Fahd University of Petroleum and Minerals.

l Symmetry Analysis of Heat and Wave Equations on Surfaces of Revolution. Masters thesis, King Fahd University of Petroleum and Minerals.

l ENHANCING THE BIOFOULING RESISTANCE OF REVERSE OSMOSIS MEMBRANES BY A NOVEL SURFACE MODIFICATION TECHNIQUE. PhD thesis, King Fahd University of Petroleum and Minerals.

l Group Classification and Similarity Solutions of Klein Gordon Equations on a Sphere. Masters thesis, King Fahd University of Petroleum and Minerals.

l Evaluation of Organic-Hydrofluoric Acid Mixtures for Sandstone Acidizing. Masters thesis, King Fahd University of Petroleum and Minerals.

l The Effects of Well and Reservoir Parameters on Horizontal and Vertical Wells Performance in Gas Condensate Reservoir. Masters thesis, King Fahd University of Petroleum and Minerals.

l INFLUENCE OF GAS RADIATION MODELS ON OXY-COMBUSTION CHARACTERISTICS PREDICTIONS. Masters thesis, King Fahd University of Petroleum and Minerals.

l Indoor Impulsive Acoustic Source Localization Methods utilizing Sparse Signal Reconstruction Algorithms. Masters thesis, King Fahd University of Petroleum and Minerals.

l SMART PITCH CONTROL STRATEGY FOR WIND GENERATION SYSTEM USING DOUBLY FED INDUCTION GENERATOR. Masters thesis, King Fahd University of Petroleum and Minerals.

l PREDICTING THE OBJECT-ORIENTED CLASS STABILITY USING SOFTWARE METRICS. Masters thesis, King Fahd University of Petroleum and Minerals.

l Synthesis and Characterization of Bi2O3 Nano-Powder Produced by Microwave Assisted Combustion Method (MWC). Masters thesis, King Fahd University of Petroleum and Minerals.

l Groundwater Management Approach at KFUPM Campus Using Numerical Simulation. Masters thesis, King Fahd University of Petroleum and Minerals.

l Evaluation of Filter Cake Mineralogy in a Horizontal Well. Masters thesis, King Fahd University of Petroleum and Minerals.

l MULTI-CRITERIA DECISION MAKING MODEL FOR THE SELECTION OF A/E PROFESSIONALS. Masters thesis, King Fahd University of Petroleum and Minerals.

l ELECTROCHEMICAL REDUCTION OF CARBON DIOXIDE TO HYDROCARBONS. PhD thesis, King Fahd University of Petroleum and Minerals.

l Multi Criteria Decision Making Model for The Selection of a Construction Contractor in Saudi Arabia. Masters thesis, King Fahd University of Petroleum and Minerals.

l Boundary Control of Nonlinear Parabolic Partial Differential Equations. Masters thesis, King Fahd University of Petroleum and Minerals.

l MODELING OF CONTINUOUS COMPOSITE PARTIALLY REINFORCED GIRDER WITH CFRP. Masters thesis, King Fahd University of Petroleum and Minerals.

l Production and Inventory Planning with Imperfect Quality Items and Shortages. Masters thesis, King Fahd University of Petroleum and Minerals.

l High Performance Stereoscopic Ray Tracing on the GPU. Masters thesis, King Fahd University of Petroleum and Minerals.

l Multi-Objective Trajectory Planning of Mobile Parallel Manipulator. Masters thesis, King Fahd University of Petroleum and Minerals.

l CMOS CIRCUIT TECHNIQUES FOR BIOMEDICAL APPLICATIONS. Masters thesis, King Fahd University of Petroleum and Minerals.

l Elemental Analysis of Concrete using Reflected Prompt Gamma-Rays. Masters thesis, King Fahd University of Petroleum and Minerals.

l Voltage Control of a Photovoltaic Connected Power Grid. Masters thesis, King Fahd University of Petroleum and Minerals.

l RESOURCE LEVELING USING IMPROVED GENETIC ALGORITHM. Masters thesis, King Fahd University of Petroleum and Minerals.

l Web Applications Security Testing: Genetic Algorithms Based Test Data Generator. Masters thesis, King Fahd University of Petroleum and Minerals.

l Numerical Modeling and Simulation of a Hot Air Jet Anti-Icing System Employing Channels for Enhanced Heat Transfer. Masters thesis, King Fahd University of Petroleum and Minerals.

l Symmetry Analysis of the Wave Equation on Two Spherically Symmetric Spacetimes. Masters thesis, King Fahd University of Petroleum and Minerals.

l NUMERICAL AND EXPERIMENTAL INVESTIGATIONS OF FRICTION STIR WELDING OF TUBE-TUBESHEET JOINTS. PhD thesis, King Fahd University of Petroleum and Minerals.

l Characterization of Fractured Basement Reservoir, Melut basin, Southeast Sudan. Masters thesis, King Fahd University of Petroleum and Minerals.

l Shear Strength of corroded reinforced concrete beams. Masters thesis, King Fahd University of Petroleum and Minerals.

l Noise Reduction in Centrifugal Compressors using Helmholtz Resonators. Masters thesis, King Fahd University of Petroleum and Minerals.

l Optimal Location and Configuration of Base Stations and Frequency Assignment for Cellular Mobile Networks. Masters thesis, King Fahd University of Petroleum and Minerals.

l Fabrication and Characterization of Iron Oxide Thin Films Prepared By the Thermal Oxidation of Iron. Masters thesis, King Fahd University of Petroleum and Minerals.

l THERMAL ANALYSIS OF THERMOELECTRIC POWER GENERATOR; INCLUDING THERMAL STRESSES. Masters thesis, King Fahd University of Petroleum and Minerals.

l Look-Up Table for Two-Phase pressure Drop Multiplier. Masters thesis, King Fahd University of Petroleum and Minerals.

l Synthesis and Characterization of Thin MFI-type Zeolite Layer on Porous Alumina Substrates. Masters thesis, King Fahd University of Petroleum and Minerals.

l Modelling and control of a Microgrid including photovoltaic an wind generation. Masters thesis, King Fahd University of Petroleum and Minerals.

l Diffusion Normalized Least Mean Squares over Wireless Sensor Networks. Masters thesis, King Fahd University of Petroleum and Minerals.

l Microtitrimetry by Differential Electrolytic Potentiometry Using Metallic Electrodes and Nanomaterials Modified Metallic Electrodes. PhD thesis, King Fahd University of Petroleum and Minerals.

l Impulsive Boundary Value Problems and Impulsive Control Systems. PhD thesis, King Fahd University of Petroleum and Minerals.

l Nonlinear Output Feedback Control Design for Autonomous Underwater Vehicle: Port Controlled Hamiltonian Approach. Masters thesis, King Fahd University of Petroleum and Minerals.

l TOLUENE METHYLATION WITH METHANOL OVER BI-POROUS ACIDIC AND BASIC ZEOLITE CATALYSTS:SYNTHESIS,CHARACTERIZATION AND KINETIC MODELING. Masters thesis, King Fahd University of Petroleum and Minerals.

l SYNTHESIS OF TITANIA NANOPARTICLES AND ITS APPLICATION FOR PHOTOCATALYTIC DEGRADATION OF POLLUTANTS FROM AQUEOUS SOLUTIONS. PhD thesis, King Fahd University of Petroleum and Minerals.

l Development of Energy-efficient Algorithms for Wireless Sensor Networks. PhD thesis, King Fahd University of Petroleum and Minerals.

l DEVELOPMENT AND CHARACTERIZATION OF EPOXY-CLAY ANOCOMPOSITES. PhD thesis, King Fahd University of Petroleum and Minerals.

l DISTRIBUTED PARTICLE SWARM OPTIMIZER FOR WIRELESS SENSOR NETWORKS. Masters thesis, King Fahd University of Petroleum and Minerals.

l Bromater Removal from Water Using Activated Carbon (AC) and Modified MWCNT. Masters thesis, King Fahd University of Petroleum and Minerals.

l Corrosion Protection of Carbon Steel by Aluminum Oxide Nano Coatings Using Solution Plasma Spray Technique. Masters thesis, King Fahd University of Petroleum and Minerals.

l Functionality-Based Software Packaging Approach for Higher Architecture Stability. PhD thesis, King Fahd University of Petroleum and Minerals.

l Gain Dynamics in Quantum Dots and Quantum Dashes. Masters thesis, King Fahd University of Petroleum and Minerals.

l Estimating Deliverability in Multi-Layered Gas Reservoirs Using Artificial Intelligence. Masters thesis, King Fahd University of Petroleum and Minerals.

l AN OPTIMIZATION MODEL FOR NOx AND SOx EMISSIONS REDUCTION IN POWER GENERATION. Masters thesis, King Fahd University of Petroleum and Minerals.

l Effects of acido-basic support properties on the catalytic hydrogenation of acetylene on gold nanoparticles. PhD thesis, King Fahd University of Petroleum and Minerals.

l DEVELOPMENT OF AN ON-SITE SAMPLING AND EXTRACTION APPROACHES FOR ORGANOCHLORINE PESTICIDES IN SEAWATER AND SEA FOODS. Masters thesis, King Fahd University of Petroleum and Minerals.

l Post-compensation of Transmitter's Nonlinear Distortions at the Receiver Using Compressed Sensing Techniques for OFDM Applications. Masters thesis, King Fahd University of Petroleum and Minerals.

l Preparation, characterization and hydrodesulfurization (hds) activity of molybdenum/sba-15 catalysts with increased and well dispersed molybdenum species. Masters thesis, King Fahd University of Petroleum and Minerals.

l Estimation of Greenhouse Gases from Combustion Facilities in Jubail Industrial City (JIC) and Yanbu Industrial City (YIC). Masters thesis, King Fahd University of Petroleum and Minerals.

l DEVELOPMENT OF ADVANCED GPR SIMULATION SYSTEM. Masters thesis, King Fahd University of Petroleum and Minerals.

l ELECTRIC FIELD OPTIMIZATION IN SF6 CIRCUIT BREAKERS. Masters thesis, King Fahd University of Petroleum and Minerals.

l MODELING OF A COMBINED ITM-POROUS OXYGEN TRANSPORT REACTOR: TOWARDS A SPATIALLY UNIFORM TEMPERATURE ITM. Masters thesis, King Fahd University of Petroleum and Minerals.

l A STUDY ON DEVELOPING SELF-CONSOLIDATING CONCRETE (SCC) UTILIZING INDIGENOUS NATURAL AND INDUSTRIAL WASTE MATERIALS. Masters thesis, King Fahd University of Petroleum and Minerals.

l A STUDY ON MIX DESIGN AND MECHANICAL PROPERTIES OF REACTIVE POWDER CONCRETE (RPC) UTILIZING FINE QUARTZ SAND. Masters thesis, King Fahd University of Petroleum and Minerals.

l Use-Case Based Early Software Effort Prediction using Fuzzy Logic and Genetic Algorithms. Masters thesis, King Fahd University of Petroleum and Minerals.

l SYNTHESIS AND CHARACTERIZATION OF ZINC OXIDE NANOPOWDER DOPED WITH COPPER BY MICROWAVE ASSISTED POLYOL METHOD. PhD thesis, King Fahd University of Petroleum and Minerals.

l Electrochemical Investigation of Phenol and Chlorophenol Derivatives. Masters thesis, King Fahd University of Petroleum and Minerals.

l PERFORMANCE OF LANTHANIDE-HALIDE SCINTILLATION DETECTORS IN PROMPT GAMMA ANALYSIS OF BULK SAMPLES. Masters thesis, King Fahd University of Petroleum and Minerals.

l Hardware Implementation of a Wireless Impulsive Source Localization System. Masters thesis, King Fahd University of Petroleum and Minerals.

l Identifying Malicious Activities in Honeynets using Clustering. Masters thesis, King Fahd University of Petroleum and Minerals.

l Effect of Ceramic Nano Fillers on Polyethylene Properties. Masters thesis, King Fahd University of Petroleum and Minerals.

l Field Deployable Electrochemical Sensors for Simultaneous Determination of Cd, Pb and Zn Heavy Metals in Drinking Water. Masters thesis, King Fahd University of Petroleum and Minerals.

l ATTACKING ANONYMOUS COMMUNICATION NETWORKS THROUGH PORT REDIRECTION. Masters thesis, King Fahd University of Petroleum and Minerals.

l THE EFFECTS OF WELL AND RESERVOIR PARAMETERS ON THE PERFORMANCE OF HORIZONTAL AND VERTICAL WELLS IN VOLUMETRIC DRY GAS RESERVOIRS. Masters thesis, King Fahd University of Petroleum and Minerals.

l TOWARDS AN INTEGRATED METAMODEL BASED APPROACH TO SOFTWARE REFACTORING. PhD thesis, King Fahd University of Petroleum and Minerals.

l Synthesis of New 4-Aryl-1-(Biarylmethylene) Piperidine Ligands, Structurally Related to SLV-313. Masters thesis, King Fahd University of Petroleum and Minerals.

l Evaluation of Damping Controls of a Permanent Magnet Synchronous Generator Wind System with Statcom. Masters thesis, King Fahd University of Petroleum and Minerals.

l DEGRADATION OF METHYL TERTIARY BUTYL ETHER USING UV/TITANIUM DIOXIDE AND CARBON NANOTUBES. Masters thesis, King Fahd University of Petroleum and Minerals.

l Load and Energy Analysis of a Commercial Building. Masters thesis, King Fahd University of Petroleum and Minerals.

l Investigation of Source Rock Potential and Micropaleontology of the Middle Ordovician Hanadir Member of the Qasim Formation,Northwestern Saudi Arabia. Masters thesis, King Fahd University of Petroleum and Minerals.

l Adsorption of Carbon Dioxide Using Chemically Treated Fly Ash. Masters thesis, King Fahd University of Petroleum and Minerals.

l Effect Of Nano Silica on Portland Saudi Cement Type 'G' In High pressure High Temperature Applications. Masters thesis, King Fahd University of Petroleum and Minerals.

l NUMERICAL AND EXPERIMENTAL ANALYSIS OF PHOTOVOLTAIC PANEL COOLING. Masters thesis, King Fahd University of Petroleum and Minerals.

l "ENERGY AND VISUAL COMFORT PERFORMANCE OF SMART WINDOWS IN OFFICE BUILDINGS IN HOT HUMID CLIMATE". Masters thesis, King Fahd University of Petroleum and Minerals.

l ITERATIVE HEURISTICS FOR CMOL HYBRID CMOS/NANODEVICES CELLS MAPPING. Masters thesis, King Fahd University of Petroleum and Minerals.

l Assessment of Chloride and Sulfate Concentrations in Concrete Using Laser-Induced Breakdown Spectroscopy (LIBS). Masters thesis, King Fahd University of Petroleum and Minerals.

l Vehicle-to-Vehicle Channel Modeling and Real Time Simulator Design. PhD thesis, King Fahd University of Petroleum and Minerals.

l CONTROL AND ESTIMATION OVER UNRELIABLE COMMUNICATION NETWORKS. Masters thesis, King Fahd University of Petroleum and Minerals.

l THE EFFECT OF LOCAL RECYCLED WASTE MATERIALS ON THE PHYSICAL BEHAVIOR AND PERFORMANCE OF JOINT FILLING AND WATERPROOFING ASPHALT. Masters thesis, King Fahd University of Petroleum and Minerals.

l Mechanical Properties and Durability of Quaternary Cement Concretes. Masters thesis, King Fahd University of Petroleum and Minerals.

l DECENTRALIZED NETWORKED CONTROL SYSTEMS WITH COMMUNICATION CONSTRAINTS. PhD thesis, King Fahd University of Petroleum and Minerals.

l PLACEMENT OF ACCESS POINTS IN WIRELESS LOCAL AREA NETWORKS. Masters thesis, King Fahd University of Petroleum and Minerals.

l TOWARDS ENHANCED STEGANOGRAPHIC METHOD FOR SECURE DATA TRANSMISSION OVER THE INTERNET. Masters thesis, King Fahd University of Petroleum and Minerals.

l THE CHARACTERISTICS OF EXPATRIATE CHAUFFEURS AND EVALUATION OF DRIVING SCHOOLS IN SAUDI ARABIA. Masters thesis, King Fahd University of Petroleum and Minerals.

l EFFECT OF BRINE COMPOSITION ON WETTABILITY ALTERATION OF CARBONATE ROCKS IN THE PRESENCE OF POLAR COMPOUNDS. Masters thesis, King Fahd University of Petroleum and Minerals.

l An FPGA Based Digital Modulation Classifier. Masters thesis, King Fahd University of Petroleum and Minerals.

l Management of the Drilling Wastes in the Eastern Province of Saudi Arabia. Masters thesis, King Fahd University of Petroleum and Minerals.

l A Generalized Modular Redundancy Scheme for Enhancing Fault Tolerance of Combinational Circuits. Masters thesis, King Fahd University of Petroleum and Minerals.

l Low-Density Parity-Check Codes for ARQ-Based Cooperative Diversity Schemes. Masters thesis, King Fahd University of Petroleum and Minerals.

l Design of CMOS Current-Mode Analog Computational Circuits. Masters thesis, King Fahd University of Petroleum and Minerals.

l LEADER FOLLOWER SLAM BASED NAVIGATION AND FLEET MANAGEMENT CONTROL. Masters thesis, King Fahd University of Petroleum and Minerals.

l EVALUATION OF POLYMERIC MATERIALS AS LOSS CIRCULATION AGENTS IN SHALLOW ZONES. Masters thesis, King Fahd University of Petroleum and Minerals.

l HEAT INTEGRATION AND RETROFITTING ANALYSIS OF ARABIAN LIGHT CRUDE DISTILLATION UNITS. Masters thesis, King Fahd University of Petroleum and Minerals.

l PERMEABILITY PREDICTION USING MERCURY INJECTION CAPILLARY PRESSURE DATA. Masters thesis, King Fahd University of Petroleum and Minerals.

l Seismic evaluation and retrofit assessment of multistorey structures using pushover analysis (POA). Masters thesis, King Fahd University of Petroleum and Minerals.

l Automatic Arabic Handwritten Check Recognition. Masters thesis, King Fahd University of Petroleum and Minerals.

l Stabilization of Networked Control Systems with Random Delays. Masters thesis, King Fahd University of Petroleum and Minerals.

l RETROFITTING OF EXTERIOR BEAM-COLUMN JOINTS USING CFRP. Masters thesis, King Fahd University of Petroleum and Minerals.

l Efficient computation of distribution function for sum of lognormal random variables & application to CDMA data network. Masters thesis, King Fahd University of Petroleum and Minerals.

l OPTIMIZATION OF IMPACT RESISTANCE OF COMPOSITE PLATES AND PIPES. Masters thesis, King Fahd University of Petroleum and Minerals.

l THE ROLE OF POTENTIAL DETERMINING IONS IN CARBONATE ROCK-SEAWATER INTERACTIONS. Masters thesis, King Fahd University of Petroleum and Minerals.

l AN ADAPTIVE OPTIMUM SMES CONTROLLER FOR PERFORMANCE ENHANCEMENT OF PMSG WIND SYSTEM. Masters thesis, King Fahd University of Petroleum and Minerals.

l POWER SYSTEM STABILITY ENHANCEMENT THROUGH WIDE AREA MEASUREMENTS. Masters thesis, King Fahd University of Petroleum and Minerals.

l The Effect of Grain Growth Inhibitors to the Microstructural and Mechanical Properties of WC-Co NanoComposites. Masters thesis, King Fahd University of Petroleum and Minerals.

l Effect of Saturation on Acoustic of Carbonate Rock. Masters thesis, King Fahd University of Petroleum and Minerals.

l EVALUATING THE EFFECTS OF THE DESIGN-BID-BUILD DELIVERY METHOD ON MUNICIPAL PROJECTS IN SAUDI ARABIA. Masters thesis, King Fahd University of Petroleum and Minerals.

l FAILURE FORECAST OF BOEING 737 BLEED AIR SYSTEM USING ARTIFICIAL NEURAL NETWORK. Masters thesis, King Fahd University of Petroleum and Minerals.

l Cooperative Uplink Transmission Schemes for Wireless MIMO Systems. Masters thesis, King Fahd University of Petroleum and Minerals.

l Development of Sorbent Materials to Remove Mercury From Liquid Hydrocarbons. PhD thesis, King Fahd University of Petroleum and Minerals.

l Anomaly Modelling and Detection for Smart Grid Communication Infrastructures. Masters thesis, King Fahd University of Petroleum and Minerals.

l Network Intrusion Detection Using Iterative Heuristics. Masters thesis, King Fahd University of Petroleum and Minerals.

l Management Framework of Software Product Line Engineering: Real Options Perspective. Masters thesis, King Fahd University of Petroleum and Minerals.

l MODELING AND MITIGATION OF ECONOMIC DENIAL OF SUSTAINABILITY (EDOS) ATTACKS IN CLOUD COMPUTING. PhD thesis, King Fahd University of Petroleum and Minerals.

l A novel high-impact phenotype selection method using a hybrid of AUC and HMM. Masters thesis, King Fahd University of Petroleum and Minerals.

l ADAPTIVE FAULT LOCATION IN POWER SYSTEM NETWORKS BASED ON SYNCHRONIZED PHASOR MEASUREMENTS. PhD thesis, King Fahd University of Petroleum and Minerals.

l INCORPORATING MULTIPLICATION INTO DIGITRECURRENCE DIVISION AND THE SQUARE ROOT TO CALCULATE (A*B)/D,(A*B)^(1/2). Masters thesis, King Fahd University of Petroleum and Minerals.

l CONTROLLED SIZE MTT (ZSM-23) ZEOLITES FOR CATALYTIC CRACKING. Masters thesis, King Fahd University of Petroleum and Minerals.

l SPECTRUM SENSING IN TIME AND FREQUENCY DOMAINS. Masters thesis, King Fahd University of Petroleum and Minerals.

l AN ON CHIP ALL-DIGITAL CONFIGURABLE CLOCK GENERATOR FOR ASICS' AT-SPEED TESTING. Masters thesis, King Fahd University of Petroleum and Minerals.

l Signal Source Searching and Tracking via Antenna Array Beam Steering on Fixed Wing UAVs for Communication Link Enhancement. Masters thesis, King Fahd University of Petroleum and Minerals.

l ANALYSIS AND RTDS IMPLEMENTATION OF STATCOM FOR POWER SYSTEM STABILITY ENHANCEMENT. Masters thesis, King Fahd University of Petroleum and Minerals.

l A SPECIAL PURPOSEPROCESSORFOR IC TESTING AND SPEED CHARACTERIZATION. Masters thesis, King Fahd University of Petroleum and Minerals.

l Distributed Kalman Filtering. PhD thesis, King Fahd University of Petroleum and Minerals.

l Identification of Discontinuous Oil Bearing Sandstone Bodies by Direct Modeling: Risk Analysis for Well Planning. Masters thesis, King Fahd University of Petroleum and Minerals.

l New Models in Inventory Control. Masters thesis, King Fahd University of Petroleum and Minerals.

l MULTIMODAL BIOMETRIC RECOGNITION USING BIO-INSPIRED OPTIMIZATION AND FUZZY FUSION. Masters thesis, King Fahd University of Petroleum and Minerals.

l Development of a Multi-Criteria Model for Assessing the Buildings Potential for Temporary Use as Flood Transitional Settlement Shelters in Yemen. Masters thesis, King Fahd University of Petroleum and Minerals.

l CHARACTERIZATION OF GAS-OIL-WATER IN A HORIZONTAL PIPELINE. Masters thesis, King Fahd University of Petroleum and Minerals.

l ISOLATION ENHANCEMENT TECHNIQUES FOR PRINTED MIMO ANTENNA SYSTEMS. Masters thesis, King Fahd University of Petroleum and Minerals.

l SYNTHESIS AND APPLICATIONS OF LINEAR AND CROSS-LINKED PH- RESPONSIVE POLYCARBO-, POLYPHOSPHO- AND POLYSULFOBETAINES. PhD thesis, King Fahd University of Petroleum and Minerals.

l Efficient Techniques for Detection and Mitigation of Power Quality Events. PhD thesis, King Fahd University of Petroleum and Minerals.

l Planning-based approach for automating sequence diagram generation. Masters thesis, King Fahd University of Petroleum and Minerals.

l Cooperative Spectrum Sensing using Swarm Intelligence and Double Thresholds. Masters thesis, King Fahd University of Petroleum and Minerals.

l BASELINE MONITORING OF SELECTED ORGANOCHLORINE PESTICIDES (OCPS) AND ORGANOPHOSPHORUS PESTICIDES (OPPS) IN THE ARABIAN GULF. Masters thesis, King Fahd University of Petroleum and Minerals.

l applications of oxy-fuel combustion technology into ion transport membrane reactors and gas turbine combustors. PhD thesis, King Fahd University of Petroleum and Minerals.

l SIMULTANEOUS EXTRACTION OF SULFUR AND MERCURY FROM FOSSIL FUELS COMBINED WITH FLUORESCENCE SPECTROSCOPY. PhD thesis, King Fahd University of Petroleum and Minerals.

l REAL-WORD ERROR DETECTION AND CORRECTION IN ARABIC TEXT. Masters thesis, King Fahd University of Petroleum and Minerals.

l Performance and Life Prediction Model for Photovoltaic Module: Effect of Encapsulant Constitutive Behavior. Masters thesis, King Fahd University of Petroleum and Minerals.

l Stabilization of Linear Systems Over Markov communication channels. Masters thesis, King Fahd University of Petroleum and Minerals.

l Digital Predistortion of Nonlinear Power Amplifiers Using Adaptive Filtering and Particle Swarm Optimization. Masters thesis, King Fahd University of Petroleum and Minerals.

l Three Problems in Unconventional Coordinates Systems (Conduction in a spheroid, Flow in a semi-elliptic tube, and Conduction from a torus). Masters thesis, King Fahd University of Petroleum and Minerals.

l Operating Rooms Scheduling at SAMSO. Masters thesis, King Fahd University of Petroleum and Minerals.

l Adaptive Equalization Based on Particle Swarm Optimization Techniques. Masters thesis, King Fahd University of Petroleum and Minerals.

l Thermodynamic Analysis and Modeling Study of an Intermittent solar Adsorption Refrigeration System. Masters thesis, King Fahd University of Petroleum and Minerals.

l Pressure Sensing in Vicinity of Leaks for Leak Detection. Masters thesis, King Fahd University of Petroleum and Minerals.

l Analysis of Contention Based MAC Protocols under Multipath Fading and Resource Management. PhD thesis, King Fahd University of Petroleum and Minerals.

l PERFORMANCE OF DUAL-HOP RELAY NETWORKS WITH CO-CHANNEL INTERFERENCE AND MULTIPATH FADING. PhD thesis, King Fahd University of Petroleum and Minerals.

l WEAR BEHAVIOR OF MAGNESIUM BASED NANOCOMPOSITES. Masters thesis, King Fahd University of Petroleum and Minerals.

l A MODEL FOR SELECTING SUSTAINABLE EXTERIOR WALL BUILDING MATERIALS /PRODUCTS IN HOT, HUMID CLIMATE. Masters thesis, King Fahd University of Petroleum and Minerals.

l SEISMIC ATTRIBUTES AND ADVANCED COMPUTER ALGORITHM TO PREDICT FORMATION PORE PRESSURE: QALIBAH FORMATION OF NORTHWEST SAUDI ARABIA. Masters thesis, King Fahd University of Petroleum and Minerals.

l OXIDATIVE DEHYDROGENATION OF N-BUTANE OVER CHROMIUM AND VANADIUM SUPPORTED CATALYSTS WITH CO2 AS A MILD OXIDANT: SYNTHESIS, CHARACTERIZATION AND KINETIC STUDIES. Masters thesis, King Fahd University of Petroleum and Minerals.

l ASSESSMENT OF UNCERTAINTY IN POROSITY MEASUREMENTS USING NMR AND CONVENTIONAL LOGGING TOOLS IN CARBONATE RESERVOIRS. Masters thesis, King Fahd University of Petroleum and Minerals.

l ECONOMIC PRODUCTION QUANTITY MODEL WITH IMPERFECT QUALITY DURING A PROCESS ADJUSTMENT PERIOD - SOME CONSIDERATIONS. Masters thesis, King Fahd University of Petroleum and Minerals.

l Polynomial Solutions of Differential Equations. Masters thesis, King Fahd University of Petroleum and Minerals.

l DEVELOPMENT OF AN ASSESSMENT TOOL FOR MAINTENANCE MANAGEMENT IN PUBLIC SCHOOLS IN SAUDI ARABIA. Masters thesis, King Fahd University of Petroleum and Minerals.

l SOLID-LIQUID MASS TRANSFER FROM SPINNING SPHERE IN NON-NEWTONIAN LIQUID. Masters thesis, King Fahd University of Petroleum and Minerals.

l EVALUATION OF COMPRESSED SENSING IN SYSTEMS UWB WITH NBI. Masters thesis, King Fahd University of Petroleum and Minerals.

l Digital Outcrop Modeling of Hofuf Outcrop via integrating LIDAR, Ground Penetrating Radar and Sedimentology, Eastern Province, Saudi Arabia. Masters thesis, King Fahd University of Petroleum and Minerals.

l AN INNOVATIVE APPLICATION OF CHELATING AGENTS FOR EOR IN CARBONATE RESERVOIRS. Masters thesis, King Fahd University of Petroleum and Minerals.

l CHALLENGES AFFECTING THE IMPLEMENTATION OF BUILDING MANAGEMENT SYSTEMS IN OFFICE BUILDINGS. Masters thesis, King Fahd University of Petroleum and Minerals.

l DESINGAND SIMULATION OFACURRENT-MODE FOLDINGAMPLIFIERAND ITSAPPLICATION IN ANALOG-TO-DIGITALCONVERTER. Masters thesis, King Fahd University of Petroleum and Minerals.

l Design of A Programmable Wideband Microwave Feed Network. Masters thesis, King Fahd University of Petroleum and Minerals.

Adamu, Sagir Synthesis of Supported Metallocene Catalysts and Application to Copolymerization of Ethylene with 4-Methyl-1-pentene. Masters thesis, King Fahd University of Petroleum and Minerals.

l Immersion and Invariance Control Design for Unmanned Aerial Vehicle. Masters thesis, King Fahd University of Petroleum and Minerals.

l DETOXIFICATION OF CHLORINATED ORGANIC COMPOUNDS USING FLUIDIC MICROREACTOR WITH GAS CHROMATOGRAPHY/MASS SPECTROMETRY. Masters thesis, King Fahd University of Petroleum and Minerals.

l Removal of aqueous phase selenium using artificial and solar radiation advanced oxidation processes. Masters thesis, King Fahd University of Petroleum and Minerals.

l RELIABILITY-BASED STRENGTH PREDICTION MODEL FOR CORRODED REINFORCED CONCRETE COLUMNS AND BEAM-COLUMNS. PhD thesis, King Fahd University of Petroleum and Minerals.

l PROPANE AROMATIZATION OVER GALLIUM-CONTAINING MFI ZEOLITES OF HIERARCHICAL PORE ARCHITECTURE:SYNTHESIS, CHARACTERIZATION AND KINETIC MODELING. Masters thesis, King Fahd University of Petroleum and Minerals.

l COMPARING HYDROCARBON VOLUME BETWEEN LSA (LAMINATED SAND ANALYSIS) AND STANDARD TECHNIQUES IN LOW RESISTIVITY SANDSTONE RESERVOIRS. Masters thesis, King Fahd University of Petroleum and Minerals.

l CONTROL OF A MICROGRID THROUGH ENERGY STORAGE DEVICES USING EVOLUTIONARY AND NEURO-FUZZY METHODS. Masters thesis, King Fahd University of Petroleum and Minerals.

l Arabic Font Recognition. Masters thesis, King Fahd University of Petroleum and Minerals.

l AN EXPERIMENTAL AND NUMERICAL STUDY OF RETROFITTED MASONRY WALLS UNDER CYCLIC LOADING]. PhD thesis, King Fahd University of Petroleum and Minerals.

l Pressure Drop Reduction of Stable Water-in-Oil Emulsion Flow in Pipes. PhD thesis, King Fahd University of Petroleum and Minerals.

l EVALUATION OF VARIABLE MESSAGE SIGNS IMPACT ON CONGESTED STREETS. PhD thesis, King Fahd University of Petroleum and Minerals.

l REMOVAL OF PHENOLIC COMPOUNDS FROM WATER USING NANO AND MICRO CARBON MATERILAS. Masters thesis, King Fahd University of Petroleum and Minerals.

l Neural Network Adaptive Control of Unmanned Vehicle with Slung Load. Masters thesis, King Fahd University of Petroleum and Minerals.

l DESIGN AND IMPLEMENTATION OF MAXIMUM POWER POINT TRACKING CONTROLLER FOR PHOTOVOLTAIC SYSTEMS. Masters thesis, King Fahd University of Petroleum and Minerals.

l SEISMIC ATTRIBUTES AND PETROPHYSICAL MODELLING OF THE ARADEIBA-D MEMBER, MUGLAD RIFT BASIN, SUDAN. Masters thesis, King Fahd University of Petroleum and Minerals.

l DEVELOPMENT OF ULTRATHIN POLYCRYSTALLINE SILICON GERMANIUM FILMS AS STRUCTURAL LAYERS FOR APPLICATIONS IN NANOELECTROMECHANICAL SYSTEMS. PhD thesis, King Fahd University of Petroleum and Minerals.

l HIGH RESOLUTION CHARACTERIZATION AND MODELLING OF AN ARAB-D OUTCROP ANALOG, CENTRAL SAUDI ARABIA. PhD thesis, King Fahd University of Petroleum and Minerals.

Bhuiyan, Tazul Islam METATHESIS OF BUTENE TO PRODUCE PROPYLENE OVER MESOPOROUS TUNGSTEN OXIDE CATALYST: SYNTHESIS, CHARACTERIZATION AND KINETIC MODELING. Masters thesis, King Fahd University of Petroleum and Minerals.

l CATALYTIC CRACKING OF VGO TO PRODUCE LIGHT OLEFINS: EFFECTS OF ADDITIVES AND KINTEIC STUDY. Masters thesis, King Fahd University of Petroleum and Minerals.

l RECOGNITION OF ARABIC ONLINE HANDWRITTEN TEXT USING SYNTACTICAL TECHNIQUES. Masters thesis, King Fahd University of Petroleum and Minerals.

l Experimental Study of The Alkaline-Surfactant-Gas (ASG) Flooding in A Carbonate Reservoir. Masters thesis, King Fahd University of Petroleum and Minerals.

l Investigation of Wormhole Penetration in Carbonate Rocks under High Pressure. Masters thesis, King Fahd University of Petroleum and Minerals.

l Removal of Thiophene and Benzothiophenes from Diesel by Metal Oxide Based Sorbents. Masters thesis, King Fahd University of Petroleum and Minerals.

l Effect of Natural Fractures on the Pressure Transient Behavior of Multilayered Reservoir. Masters thesis, King Fahd University of Petroleum and Minerals.

l Airplane Maintenance Scheduling With Maintenance Crew Assignment. Masters thesis, King Fahd University of Petroleum and Minerals.

l CHARACTERIZATION OF OIL WATER FLOW IN HORIZANATAL PIPES. Masters thesis, King Fahd University of Petroleum and Minerals.

l DEVELOPMENT OF VISIBLE LIGHT-ACTIVE CATALYSTS FOR MTBE REMOVAL FROM GROUND WATER. Masters thesis, King Fahd University of Petroleum and Minerals.

l IMPROVED NUMERICAL SIMULATION OF WORMHOLE PROPAGATION IN CARBONATE CORE DURING ACID STIMULATION. Masters thesis, King Fahd University of Petroleum and Minerals.

l AUTOMATIC EXTRACTION OF ARABIC SUBWORD UNITS FOR CONTINUOUS SPEECH RECOGNITION. PhD thesis, King Fahd University of Petroleum and Minerals.

l EMBRACING MODEL TRANSFORMATIONS IN FUNCTIONAL REQUIREMENTS SPECIFICATION. Masters thesis, King Fahd University of Petroleum and Minerals.

l Development and Assessment of Solar-Assisted Gas Turbine Cogeneration Systems in Saudi Arabia. Masters thesis, King Fahd University of Petroleum and Minerals.

l Synthesis and Characterization of Mononuclear Platinum(II) Complexes With Some Thione Ligands. Masters thesis, King Fahd University of Petroleum and Minerals.

l NO-REFERENCE IMAGE QUALITY ASSESSMENT USING NEURAL NETWORKS. Masters thesis, King Fahd University of Petroleum and Minerals.

l Improvement of Asphalt Performance using Industrial wastes. PhD thesis, King Fahd University of Petroleum and Minerals.

l PERFORMANCE ANALYSIS OF SOLAR ABSORBING FLUIDS IN CHANNEL FLOW INCORPORATING SELECTIVE SURFACES. Masters thesis, King Fahd University of Petroleum and Minerals.

l A NEW EOR METHOD FOR SANDSTONE RESERVOIRS USING HIGH PH CHELATING AGENTS. Masters thesis, King Fahd University of Petroleum and Minerals.

l Carbon Nanostructures Grown on 3-D Solid Structure for Dry Reforming of Methane. Masters thesis, King Fahd University of Petroleum and Minerals.

l EFFECT OF SILVER COATING AND DOPING OF IRON AND COBALT ON THE OXYGEN PERMEABILITY OF La2NiO4. Masters thesis, King Fahd University of Petroleum and Minerals.

l OPTIMIZATION AND SENSITIVITY ANALYSIS OF FOAM ASSISTED WATER ALTERNATING GAS. Masters thesis, King Fahd University of Petroleum and Minerals.

l ENERGY-SAVING HYBRID DETECTION SCHEME WITH PATH LENGTH AWARE FOR WIRELESS SENSOR NETWORK. Masters thesis, King Fahd University of Petroleum and Minerals.

l OPTIMIZATION OF DRILLING PARAMETERS USING SPECIFIC ENERGY IN REAL TIME. PhD thesis, King Fahd University of Petroleum and Minerals.

l THE ROLE OF NUCLEAR POWER IN DIVERSIFYING ELECTRICITY FUEL. Masters thesis, King Fahd University of Petroleum and Minerals.

l AlCrN HARD COATING DEPOSITED BY MAGNETRON SPUTTERING- SCRATCH, WEAR AND CREEP BEHAVIOR. Masters thesis, King Fahd University of Petroleum and Minerals.

l EFFECT OF PROCESS PARAMETERS ON MICROSTRUCTURE AND PROPERTIES OF SPARK PLASMA SINTERED AL-SIC NANOCOMPOSITES. Masters thesis, King Fahd University of Petroleum and Minerals.

l Synthesis and Application of Some Ionic Polymers as Antiscalants and Components for Aqueous Two-Phase Systems. PhD thesis, King Fahd University of Petroleum and Minerals.

l Congestion Management of Transmission Network Using STATCOM. Masters thesis, King Fahd University of Petroleum and Minerals.

l Scalable Wireless Video Streaming over Real-Time Publish Subscribe Middleware. Masters thesis, King Fahd University of Petroleum and Minerals.

l Flexural Analysis and Material Characterization of Laser Welded 316L Steel Blanks. Masters thesis, King Fahd University of Petroleum and Minerals.

l Fault Tolerant Mission-Critical Wireless Sensor and Actor Networks. PhD thesis, King Fahd University of Petroleum and Minerals.

l SYNTHESIS, CHARACTERIZATION AND EVALUATION OF (CO)MOS2 HDS SUPPORTED ON HOLLOW CARBON SPHERE FOR DESULFURIZATION OF THIOPHENE. Masters thesis, King Fahd University of Petroleum and Minerals.

l Development of a Laser Induced Breakdown Spectrometer for detection of toxic elements in cosmetic products. Masters thesis, King Fahd University of Petroleum and Minerals.

l DEVELOPMENT OF ANALYTICAL METHODS FOR TRACE ANALYSIS OF ORGANOPHOSPHORUS PESTICIDES AND BIOGENIC AMINES IN FOOD SAMPLES. Masters thesis, King Fahd University of Petroleum and Minerals.

l STUDY ON INTEGRATED ELECTROKINETICS-ADSORPTION REMEDIATION TECHNIQUE FOR SIMULTANEOUS REMOVAL OF HEAVY METALS AND ORGANICS FROM SALINE-SODIC SOIL: EFFECTS OF OPERATING PARAMETERS. PhD thesis, King Fahd University of Petroleum and Minerals.

l Reliability Analysis of C-130 Turboprop Engine Components Using Artificial Neural Network. Masters thesis, King Fahd University of Petroleum and Minerals.

l Two Layers Peer-To-Peer (P2P) Domain Name System (DNS). Masters thesis, King Fahd University of Petroleum and Minerals.

l Optimal Strategies for Bidding V2G Services Using Stochastic Programming. Masters thesis, King Fahd University of Petroleum and Minerals.

l IMPROVEMENT OF EASTERN SAUDI SOILS UTILIZING INDIGENOUS INDUSTRIAL BY-PRODUCTS. PhD thesis, King Fahd University of Petroleum and Minerals.

l MODELING WETTABILITY ALTERATION DURING IMMISCIBLE CARBON DIOXIDE FLOODING PROCESS. PhD thesis, King Fahd University of Petroleum and Minerals.

l MODIFIED CORNER REFLECTOR ANTENNA FED BY A PRINTED DIPOLE ON A QUARTER CYLINDRICAL SUBSTRATE. Masters thesis, King Fahd University of Petroleum and Minerals.

l The Effect of Local Schools Traffic on Congestion of Urban Network. Masters thesis, King Fahd University of Petroleum and Minerals.

l DOCUMENT ANALYSIS AND SCRIPT IDENTIFICATION. Masters thesis, King Fahd University of Petroleum and Minerals.

l WIDE AREA DAMPING CONTROLLER DESIGN AND IMPLEMENTATION. Masters thesis, King Fahd University of Petroleum and Minerals.

l A Framework model for managing the buildings Commissioning Process. Masters thesis, King Fahd University of Petroleum and Minerals.

l Finite Element Modeling of Glass Fiber Reinforced Plastic Pipes under Impact Loading. Masters thesis, King Fahd University of Petroleum and Minerals.

l Optimal Aggregator Bidding Strategies for Vehicle-to-Grid using Fuzzy Optimization. Masters thesis, King Fahd University of Petroleum and Minerals.

l Synthesis of Nanostructured Semiconductors via Pulsed Laser Ablation in Liquids and their Characterization. Masters thesis, King Fahd University of Petroleum and Minerals.

l Study of the long-term degradation of boiler superheater tubes and its effects on remaining life predictions. Masters thesis, King Fahd University of Petroleum and Minerals.

l Synthesis and Characterization of Nitrogen doped Carbon electrocatalysts for fuel Cells and Air batteries energy conversion systems. Masters thesis, King Fahd University of Petroleum and Minerals.

l Models of Fractional Diffusion for Radial-Composite Reservoirs. Masters thesis, King Fahd University of Petroleum and Minerals.

l COMMUNICATION FREE CHARGING MANAGEMENT OF ELECTRIC VEHICLES UNDER GRID CONSTRAINTS. Masters thesis, King Fahd University of Petroleum and Minerals.

l Effect of Input Correlation on (Normalized) Adaptive Filters. Masters thesis, King Fahd University of Petroleum and Minerals.

l Low Complexity Scalable Behavioral Modeling of RF Power Amplifiers with Memory Effects. Masters thesis, King Fahd University of Petroleum and Minerals.

l DETERMINATION OF TRACE LEVEL HALOACETIC ACIDS, PERCHLORATES AND CHLOROPHENOLS IN WATER SAMPLES USING MICROEXTRACTION TECHNIQUES. Masters thesis, King Fahd University of Petroleum and Minerals.

l Performance Improvement of a Vapor Compression Air Conditioning System by Condensate and Fresh Water Source. Masters thesis, King Fahd University of Petroleum and Minerals.

l PROMPT GAMMA ANALYSIS OF HYDROGEN, CARBON, OXYGEN AND NITROGEN IN BULK SAMPLES. Masters thesis, King Fahd University of Petroleum and Minerals.

l A Keyphrase Extraction Algorithm and its Potential on Arabic. Masters thesis, King Fahd University of Petroleum and Minerals.

l XML STRUCTURE-BASED CLUSTERING AND ITS APPLICATION IN SELECTIVITY ESTIMATION. Masters thesis, King Fahd University of Petroleum and Minerals.

l Experimental Studies on Solar Photo-voltaic Refrigeration System. Masters thesis, King Fahd University of Petroleum and Minerals.

l Evaluation of the Effectiveness of Alkaline-earth metal oxides in Inhibiting Vanadium-induced Hot Corrosion of Yttria-stabilized Zirconia Thermal Barrier Coatings (TBCs). Masters thesis, King Fahd University of Petroleum and Minerals.

l Group Classification of Poisson equation on Surfaces of Revolution. Masters thesis, King Fahd University of Petroleum and Minerals.

l A GENERAL STOCHASTIC MODEL FOR REFINERY PLANNING UNDER UNCERTAINTY. Masters thesis, King Fahd University of Petroleum and Minerals.

l DEVELOPMENT OF AUTOMATED ON-SITE ANALYTICAL METHODS FOR WATER ANALYSIS. PhD thesis, King Fahd University of Petroleum and Minerals.

l Real-Time Performance Evaluation of Flooding & Recursive Time Synchronization Protocols over Arduino & XBee. Masters thesis, King Fahd University of Petroleum and Minerals.

l Quality of Service Provisioning in Biosensor Networks. Masters thesis, King Fahd University of Petroleum and Minerals.

l SYNTHESIS AND CHARACTERIZATION OF ALUMINA SUPPORTED HIGHLY DISPERSED AND HIGH LOADING MOLYBDENUM SULFIDE CATALYSTS VIA ION-EXCHANGE METHOD. Masters thesis, King Fahd University of Petroleum and Minerals.

l A STUDY ON DURABILITY PROPERTIES OF ULTRA-HIGH PERFORMANCE CONCRETE (UHPC) UTILIZING LOCAL FINE QUARTZ SAND. Masters thesis, King Fahd University of Petroleum and Minerals.

l Modeling, Simulation & Control of Photovoltaic Reverse Osmosis Desalination System. Masters thesis, King Fahd University of Petroleum and Minerals.

l MODIFICATION OF STYRENE-METHYL METH ACRYLATE COPOLYMER IN THE PRESENCE OF PRISTINE AND MODIFIED GRAPHENE BY USING MICROWAVE IRRADIATION. Masters thesis, King Fahd University of Petroleum and Minerals.

l EFFECTIVENESS OF PROJECT TEAMS AND THEIR IMPACTS ON THE PERFORMANCE OF SAUDI CONSTRUCTION PROJECTS. Masters thesis, King Fahd University of Petroleum and Minerals.

l Local and Non-local Linearization of Scalar Second Order ODEs in the Normal Form. Masters thesis, King Fahd University of Petroleum and Minerals.

l Nano-Scale Plasmonic Resonators for Bio-Sensing. Masters thesis, King Fahd University of Petroleum and Minerals.

l APPLICATION OF ENZYME TO BIOREMEDIATE WATER FROM ETHYLENE DICHLORIDE AND OIL. Masters thesis, King Fahd University of Petroleum and Minerals.

l GLOBAL OPTIMIZATION STRATEGIES FOR WELL TEST IN SINGLE AND DUAL POROSITY RESERVOIRS. Masters thesis, King Fahd University of Petroleum and Minerals.

l On the stability of some systems of thermoelasticity of type III. PhD thesis, King Fahd University of Petroleum and Minerals.

l Approximate Lie Symmetries. Masters thesis, King Fahd University of Petroleum and Minerals.

l STOCHASTIC METHODS FOR SURFACTANT-POLYMER FLOODING AND WELL PLACEMENT OPTIMIZATION. Masters thesis, King Fahd University of Petroleum and Minerals.

l Sensitivity-Based Upscaling for Large-Scale Reservoir Model History Matching. Masters thesis, King Fahd University of Petroleum and Minerals.

l Image Processing Based Contamination Level Monitoring of High Voltage Insulators. Masters thesis, King Fahd University of Petroleum and Minerals.

l DEVELPMENT OF A NEW COST-EFFECTIVE POLYMER GEL FOR WATER CONTROL IN OIL AND GAS WELLS. PhD thesis, King Fahd University of Petroleum and Minerals.

l Optimal Operation and Economic Impacts of Energy Storage System in Distribution Network. Masters thesis, King Fahd University of Petroleum and Minerals.

l EFFECT OF NANO CLAY ON OIL WELL CEMENT PROPERTIES FOR HIGH PRESSURE AND TEMPERATURE APPLICATIONS. Masters thesis, King Fahd University of Petroleum and Minerals.

l Design and Fabrication of Immunochromatographic Strip Biosensor for Breast Cancer Protein Biomarkers Analysis. Masters thesis, King Fahd University of Petroleum and Minerals.

l ETHYLBENZENE DISPROPORTIONATION AND ETHYLATION OVER ZEOLITE BASED CATALYSTS: EFFECTS OF ZEOLITE STRUCTURE AND ACIDITY. Masters thesis, King Fahd University of Petroleum and Minerals.

l EXPERIMENTAL INVESTIGATION OF TUBE RUPTURE UNDER BOILER DYNAMIC OPERATING CONDITIONS. Masters thesis, King Fahd University of Petroleum and Minerals.

l Transmission Amplitude Variation with Offset (TAVO). Masters thesis, King Fahd University of Petroleum and Minerals.

l Optimal EPQ Model for Stock-Dependent Demand and Variable Holding Cost. Masters thesis, King Fahd University of Petroleum and Minerals.

l Solid acid catalyst for selective synthesis of 2-phenyldodecane. Masters thesis, King Fahd University of Petroleum and Minerals.

l Fundamental Studies of Dust Fouling and Mitigation Approaches for PV Modules. Masters thesis, King Fahd University of Petroleum and Minerals.

l Ray-Tracing Wireless Channel Modeling and Verification in CoMP Systems. Masters thesis, King Fahd University of Petroleum and Minerals.

l Thixoforging of Aluminum Nano-composites Synthesized by Ultrasonic Stir Casting. Masters thesis, King Fahd University of Petroleum and Minerals.

l TWO DIMENSIONAL J-MATRIX APPROACH TO QUANTUM SCATTERING. Masters thesis, King Fahd University of Petroleum and Minerals.

l CHARACTERISTICS OF YOUNG DRIVERS INVOLVED IN THE ROAD ACCIDENTS IN DAMMAM METROPOLITAN AREA. Masters thesis, King Fahd University of Petroleum and Minerals.

l THE DESIGN OF FINITE IMPULSE RESPONSE (FIR) WAVEFIELD EXTRAPOLATION FILTERS. Masters thesis, King Fahd University of Petroleum and Minerals.

l A STUDY ON STABILIZATION/SOLIDIFICATION OF OIL-CONTAMINATED SOILS. Masters thesis, King Fahd University of Petroleum and Minerals.

l Ce/W modified mesoporous carbon supported Pt-Pd electro catalysts for formic acid oxidation. Masters thesis, King Fahd University of Petroleum and Minerals.

l AHP AND DEA HYBRID MODEL FOR PERFORMANCE MEASURES AGGREGATION AND RANKING OF DECISION MAKING UNITS. Masters thesis, King Fahd University of Petroleum and Minerals.

l CHALLENGES OF ADOPTING SOCIAL COMPUTING IN GLOBAL SOFTWARE DEVELOPMENT. Masters thesis, King Fahd University of Petroleum and Minerals.

l A Study of Certain Fin Equations Using Lie Symmetry Analysis. PhD thesis, King Fahd University of Petroleum and Minerals.

l MODELING, SIMULATION AND CONTROL OF DIRECTIONAL STEERING SYSTEM. Masters thesis, King Fahd University of Petroleum and Minerals.

l COMPUTATIONAL FLUID DYNAMICS (CFD) MODELING OF SOLAR STEAM METHANE REFORMER AND DESIGN OF AN INTEGRATED NOVEL SOLAR COLLECTOR. Masters thesis, King Fahd University of Petroleum and Minerals.

l DEVELOPMENT OF A NOVEL HYBRID STORAGE SYSTEM FOR AQUA-AMMONIA SOLAR ABSORPTION REFRIGERATION CYCLE. Masters thesis, King Fahd University of Petroleum and Minerals.

l Evaluation of SINR for Practical Coordinated Multi-Point Networks. Masters thesis, King Fahd University of Petroleum and Minerals.

l NUMERICAL AND EXPERIMENTAL ANALYSIS ON THERMAL STRESS MEASUREMENT OF SPIRAL WELDED PIPES. Masters thesis, King Fahd University of Petroleum and Minerals.

l Synthesis, characterization and anticancer activity of new gold (III) complexes with diamine and thione ligands. PhD thesis, King Fahd University of Petroleum and Minerals.

l Control Algorithms for Distributed Networked Industrial Systems. PhD thesis, King Fahd University of Petroleum and Minerals.

l SEDIMENTOLOGICAL AND PETROPHYSICAL CHARACTERIZATION OF SARAH FORMATION WITH THE AID OF GIS, CENTRAL SAUDI ARABIA. Masters thesis, King Fahd University of Petroleum and Minerals.

l IMPLICATIONS OF CLIMATE CHANGE ON CROP WATER REQUIREMENTS IN SAUDI ARABIA. Masters thesis, King Fahd University of Petroleum and Minerals.

l A discontinuous Petrov-Galerkin method for time-fractional diffusion equations. PhD thesis, King Fahd University of Petroleum and Minerals.

l GLOBFACT: A Success Factor Framework for Project Management Success in GSD. Masters thesis, King Fahd University of Petroleum and Minerals.

l PMCMG: Project Management Challenges Model for Global Software Development. Masters thesis, King Fahd University of Petroleum and Minerals.

l Optimization of Vertical Placement of Horizontal Wells in Mature Carbonate Reservoirs. Masters thesis, King Fahd University of Petroleum and Minerals.

l EVALUATING THE EDOS-SHIELD MITIGATION TECHNIQUE USING AN EXPERIMENTAL TESTBED. Masters thesis, King Fahd University of Petroleum and Minerals.

l Production of sustainable concrete using indigenous Saudi Natural Pozzolan. Masters thesis, King Fahd University of Petroleum and Minerals.

l A NOVEL INTRUSION DETECTION SYSTEM FOR COLLABORATIVE ATTACKS IN MOBILE AD-HOC NETWORKS. Masters thesis, King Fahd University of Petroleum and Minerals.

l AUTOMATIC DIACRITICS RESTORATION FOR ARABIC TEXT. Masters thesis, King Fahd University of Petroleum and Minerals.

l Design and Optimization of Carbon Nano Tubes Production in Chemical Vapor Deposition Reactor. Masters thesis, King Fahd University of Petroleum and Minerals.

l EFFECT OF CASTING TEMPERATURE AND CURING REGIME ON MECHANICAL PROPERTIES AND DURABILITY OF CONCRETE. Masters thesis, King Fahd University of Petroleum and Minerals.

l Cooperative Control of Port Controlled Hamiltonian Systems. PhD thesis, King Fahd University of Petroleum and Minerals.

l ASSESSMENT OF DENSITY AND SHEAR STRENGTH OF EASTERN SAUDI SANDS USING DYNAMIC CONE PENETRATION TESTING (DCPT). Masters thesis, King Fahd University of Petroleum and Minerals.

l ROBUST ESTIMATORS IN MODERN POWER SYSTEM NETWORKS. Masters thesis, King Fahd University of Petroleum and Minerals.

l OBSERVER BASED H-inf CONTROL FOR UNCERTAIN NONLINEAR NETWORK SYSTEM WITH PACKET DROPOUTS. Masters thesis, King Fahd University of Petroleum and Minerals.

l SYNTHETIC APERTURE RADAR PROCESSING USING UWB OFDM SIGNALS. Masters thesis, King Fahd University of Petroleum and Minerals.

l Drilling Time Optimization Using differential evolution. Masters thesis, King Fahd University of Petroleum and Minerals.

l DEVELOPMENT OF NANOSIZED ZEOLITES FOR CONVERTING METHANOL TO OLEFINS. Masters thesis, King Fahd University of Petroleum and Minerals.

l STUDY OF POLYMER-SURFACTANT INTERACTIONS FOR CHEMICAL ENHANCED OIL RECOVERY IN CARBONATE RESERVOIRS. Masters thesis, King Fahd University of Petroleum and Minerals.

l Sedimentological Heterogeneity of the Late Ordovician Glacio-Fluvial Sarah Formation, Al-Qaseem Area, Saudi Arabia: Impact on Petrophysical Properties and Reservoir Quality. Masters thesis, King Fahd University of Petroleum and Minerals.

l Wormhole Characterization Using Nuclear Magnetic Resonance (NMR). Masters thesis, King Fahd University of Petroleum and Minerals.

l The Effects of Project Delivery Systems on Project Performance. Masters thesis, King Fahd University of Petroleum and Minerals.

l PERFORMANCE EVALUATION OF IPV6 BGP BASED SOLUTIONS FOR MALICIOUS ISP BLOCKING. Masters thesis, King Fahd University of Petroleum and Minerals.

l IMPROVING BITTORRENT CHOKING ALGORITHM TO MITIGATE FREE RIDING. Masters thesis, King Fahd University of Petroleum and Minerals.

l Using Security Robustness Analysis for Early Stage Validation of Functional Security Requirements. Masters thesis, King Fahd University of Petroleum and Minerals.

l EVALUATION OF SULFUR MODIFIED FOAMED ASPHALT FOR LOCAL SOIL STABILIZATION. Masters thesis, King Fahd University of Petroleum and Minerals.

l Nonlinear Model Predictive Control of Multi-Machine Power System. Masters thesis, King Fahd University of Petroleum and Minerals.

l MITIGATION OF FREE RIDING IN PEER-TO-PEER SYSTEMS. PhD thesis, King Fahd University of Petroleum and Minerals.

l EXPERIMENTAL INVESTIGATION AND NUMERICAL MODELING OF TWO-DIMENSIONAL CHLORIDE DIFFUSION IN CONCRETE. Masters thesis, King Fahd University of Petroleum and Minerals.

l AN IMAGE-BASED VACANT PARKING DETECTION SYSTEM USING HYBRID FEATURES AND A BAYESIAN CLASSIFIER. Masters thesis, King Fahd University of Petroleum and Minerals.

l EVALUATION OF SULFUR MODIFIED EMULSIFIED ASPHALT FOR ROAD CONSTRUCTION. Masters thesis, King Fahd University of Petroleum and Minerals.

l Behavioural Modeling of Dynamic Nonlinear Transmitters for LTE-Advanced Applications. Masters thesis, King Fahd University of Petroleum and Minerals.

l AN ENHANCED MITIGATION TECHNIQUE FOR ECONOMIC DENIAL OF SUSTAINABILITY (EDOS) ATTACK. Masters thesis, King Fahd University of Petroleum and Minerals.

l INVESTIGATING DISLOCATION STRUCTURE EVOLUTION DURING NANOINDENTATION. Masters thesis, King Fahd University of Petroleum and Minerals.

l WELLBORE STABILITY ASSESSMENT IN A SHALE FORMATION. Masters thesis, King Fahd University of Petroleum and Minerals.

l Microwave Technique for Monitoring Fluid Level in the Horizontal Petroleum Carrying Pipeline. PhD thesis, King Fahd University of Petroleum and Minerals.

l Elastic Recovery Evaluation of Saudi Asphalt Modified with Commercial Polymers. Masters thesis, King Fahd University of Petroleum and Minerals.

l H2S AND CO2 CORROSION OF SA-543 AND X65 STEELS IN OIL/WATER EMULSION. Masters thesis, King Fahd University of Petroleum and Minerals.

l MULTIPHYSICS MODELING OF THE SPARK PLASMA SINTERING PROCESS. Masters thesis, King Fahd University of Petroleum and Minerals.

l A Coupled Electronic-Optical Simulation Model of GaN-Based LEDs. Masters thesis, King Fahd University of Petroleum and Minerals.

l Removal of Methyl Tertiary Butyl Ether (MTBE) from Water Using Modified and Non-modified Fly Ash. Masters thesis, King Fahd University of Petroleum and Minerals.

l An Efficient Galerkin Method for Stochastic Differential Equations with Applications to Darcy's Equation. PhD thesis, King Fahd University of Petroleum and Minerals.

l ON COMPENSATING THE OFDM PHYSICAL LAYER IMPAIRMENTS USING COMPRESSIVE SENSING. Masters thesis, King Fahd University of Petroleum and Minerals.

l POROSITY CLASSIFICATION AND RESERVOIR FLOW UNITS RANKING IN THE KHARTAM MEMBER, KHUFF FORMATION (PERMO-TRIASSIC): OUTCROP APPROACH, CENTRAL SAUDI ARABIA. Masters thesis, King Fahd University of Petroleum and Minerals.

l STUDY ON THE SOLID PARTICLE EROSION AND EROSION-CORROSION BEHAVIOR OF ALUMINUM AND STEELS. Masters thesis, King Fahd University of Petroleum and Minerals.

l IMPROVED INERTIAL NAVIGATION SYSTEM USING ALL-ACCELEROMETERS. Masters thesis, King Fahd University of Petroleum and Minerals.

l Integration of Multivariate Statistical Process Control and Engineering Process Control. Masters thesis, King Fahd University of Petroleum and Minerals.

l NEUMANN-BOUNDARY STABILIZATION OF THE WAVE EQUATION WITH INTERNAL DAMPING CONTROL AND APPLICATIONS. Masters thesis, King Fahd University of Petroleum and Minerals.

l CODING STANDARDS VIOLATIONS IMPACT ON SOFTWARE FAULTS. Masters thesis, King Fahd University of Petroleum and Minerals.

l Multidirectional Beam Scanning of a Circular Waveguide Antenna Loaded with Magnetic Material. Masters thesis, King Fahd University of Petroleum and Minerals.

l MODULARITY AND FUNCTIONAL CORRECTNESS EVALUATION OF DESIGN PATTERNS. Masters thesis, King Fahd University of Petroleum and Minerals.

l A NEW MEMRISTOR IMPLEMENTATION AND ITS APPLICATIONS IN ANALOG CIRCUITS. Masters thesis, King Fahd University of Petroleum and Minerals.

l Computational Circuits Based On CMOS Operating In Subthreshold Region. Masters thesis, King Fahd University of Petroleum and Minerals.

l ASYMPTOTIC BEHAVIOR OF SOLUTIONS OF SOME FRACTIONAL DIFFERENTIAL PROBLEMS. Masters thesis, King Fahd University of Petroleum and Minerals.

l WATER HAMMER MODELING AND ANALYSIS FOR KHOBAR-DAMMAM WATER TRANSMISSION RING LINE. Masters thesis, King Fahd University of Petroleum and Minerals.

l Arabic Handwriting: Analysis and Synthesis. PhD thesis, King Fahd University of Petroleum and Minerals.

l COORDINATED TRADING OF ENERGY RESOURCES AND PUMPED-STORAGE SYSTEMS IN ELECTRICITY MARKETS. Masters thesis, King Fahd University of Petroleum and Minerals.

l DEVELOPMENT OF ENERGY EFFICIENT SOLAR POWERED AQUA-AMMONIA ABSORPTION REFRIGERATION AND AIR-CONDITIONING SYSTEM. PhD thesis, King Fahd University of Petroleum and Minerals.

l Selective and efficient oxidation of alcohols to aldehydes in presence of visible-light-driven photocatalysts: A green organic synthesis approach. Masters thesis, King Fahd University of Petroleum and Minerals.

l HIERARCHICAL CONTROL AND MANAGEMENT STRATEGY OF MICROGRID WITH HYBRID ENERGY RESOURCES. Masters thesis, King Fahd University of Petroleum and Minerals.

l Consultants' and Contractors’ perception of critical success factors for large construction projects. Masters thesis, King Fahd University of Petroleum and Minerals.

l SURFACTANT – POLYMER (SP) FLOODING FOR EOR IN CARBONATE RESERVOIRS. Masters thesis, King Fahd University of Petroleum and Minerals.

l Joint Inversion of Gravity and Ground Penetrating Radar Data to Characterize Subsurface Cavities. Masters thesis, King Fahd University of Petroleum and Minerals.

l DESIGN AND FABRICATION OF DIFFERENT TEXTURED SURFACES WITH IMPROVED HYDROPHOBICITY FOR PHOTOVOLTAIC CELLS’ APPLICATIONS. Masters thesis, King Fahd University of Petroleum and Minerals.

l Per-Energy Capacity In Macro-Femto Environment Under Fading Condition And Inaccurate Power Control. Masters thesis, King Fahd University of Petroleum and Minerals.

l Towards Novel Paradigm of Seismic Signal Processing. Masters thesis, King Fahd University of Petroleum and Minerals.

l SOFT ANALYZER FOR NOX EMISSIONS APPLICATION ON CGTG IN COGENERATION PLANT. Masters thesis, King Fahd University of Petroleum and Minerals.

l Transport Properties in Bilayer Graphene. Masters thesis, King Fahd University of Petroleum and Minerals.

l Bioinspired Algorithm for Identifying Overlapping Clusters in Protein-Protein Interaction Networks. Masters thesis, King Fahd University of Petroleum and Minerals.

l SYNTHESIS AND CHARACTERIZATION OF NANO-METAL OXIDE ZEOLITES FOR HYDROGEN GAS DETECTION. Masters thesis, King Fahd University of Petroleum and Minerals.

l OPTIMIZATION OF ENERGY DETECTION IN COGNITIVE RADIO NETWORKS. Masters thesis, King Fahd University of Petroleum and Minerals.

l PLASMON-ENHANCED WHITE LIGHT GENERATION IN PHOSPHOR BASED GAN LEDS. Masters thesis, King Fahd University of Petroleum and Minerals.

l Multi-stage Bubble Column Humidifier for Thermal Driven Mechanical Compression Humidification Dehumidification Desalination System. Masters thesis, King Fahd University of Petroleum and Minerals.

l Multi_Commodity Supply Network Design in Nonprofit Reverse Logistics. Masters thesis, King Fahd University of Petroleum and Minerals.

l Acceptance Test Case Driven Component Selection Approah. Masters thesis, King Fahd University of Petroleum and Minerals.

l ADSORPTION OF CHLOROMETHANES FROM WATER USING ACTIVATED CARBON / METAL OXIDES NANOPARTICLES. Masters thesis, King Fahd University of Petroleum and Minerals.

l Agent-Based Framework for Semantic Query-Manipulation and Personalized Retrieval of Health and Nutrition Information. PhD thesis, King Fahd University of Petroleum and Minerals.

l A NETWORK OF HETEROGENEOUS AND DISTRIBUTED ONTOLOGIES FOR HEALTH AND NUTRITION INFORMATION SYSTEM. Masters thesis, King Fahd University of Petroleum and Minerals.

l STRUCTURAL STABILITY OF MEMS ARCHES ACTUATED BY ELECTROSTATIC FRINGING FIELDS. Masters thesis, King Fahd University of Petroleum and Minerals.

l Quality Services Problems Affecting Construction Projects in Saudi Arabia: A/E's Prospective. Masters thesis, King Fahd University of Petroleum and Minerals.

l MULTILINGUAL FRAMEWORK FOR ONTOLOGY-BASED SEMANTIC ANNOTATION OF HEALTH AND NUTRITION WEBSITES. PhD thesis, King Fahd University of Petroleum and Minerals.

l DESIGN OF PRINTED PLANAR ANTENNA ARRAY WITH INTEGRATED FEED NETWORK. Masters thesis, King Fahd University of Petroleum and Minerals.

l Dynamic Spectrum Allocation For Heterogeneous Cognitive Radio Networks With Femtocells. Masters thesis, King Fahd University of Petroleum and Minerals.

l Brain Tumor Analysis and Classification of Brain MR Images. Masters thesis, King Fahd University of Petroleum and Minerals.

l DESIGN AND EVALUATION OF MUTATION OPERATORS FOR THE ASMETAL LANGUAGE. Masters thesis, King Fahd University of Petroleum and Minerals.

l INDOOR LOCALIZATION AND RADIO MAP ESTIMATION USING GEOMETRICALLY PERTURBED UNSUPERVISED MANIFOLD ALIGNMENT. Masters thesis, King Fahd University of Petroleum and Minerals.

l STRUCTURAL BEHAVIOR OF UNREINFORCED HYBRID SLAB ELEMENTS CAST WITH ULTRA-HIGH PERFORMANCE CONCRETE (UHPC). PhD thesis, King Fahd University of Petroleum and Minerals.

l MULTI-MACHINE POWER SYSTEM STABILIZER FOR A LOCAL INDUSTRIAL PLANT. Masters thesis, King Fahd University of Petroleum and Minerals.

l MODELING THE BEHAVIOR OF SULFUR MODIFIED FOAMED AND EMULSIFIED ASPHALT SOILS MIXES FOR LOCAL ROAD APPLICATIONS. PhD thesis, King Fahd University of Petroleum and Minerals.

l Noether Symmetries of Bianchi Type II Spacetime Metrics. Masters thesis, King Fahd University of Petroleum and Minerals.

l ENHANCEMENT OF MECHANICAL AND PHYSICAL PROPERTIES OF SILICATE BASED EPOXY NANOCOMPOSITES. Masters thesis, King Fahd University of Petroleum and Minerals.

l FABRICATION AND WETTABILITY STUDY OF METAL OXIDE PHOTOCATALYST FILMS FOR OIL-WATER SEPARATION. Masters thesis, King Fahd University of Petroleum and Minerals.

l Causes of Schedule Delays in Large Building Construction Projects in Bangladesh. Masters thesis, King Fahd University of Petroleum and Minerals.

l APPLICATION OF NEURAL NETWORK FOR MODE CHOICE MODELING AND MODAL TRAFFIC FORECASTING. PhD thesis, King Fahd University of Petroleum and Minerals.

l Power System Instability Prediction and Mitigation using Synchrophasors. Masters thesis, King Fahd University of Petroleum and Minerals.

l OPTIMIZATION AND FAILURE ANALYSIS OF A CABLE BASED PARALLEL MANIPULATOR FOR SUBSEA APPLICATIONS. Masters thesis, King Fahd University of Petroleum and Minerals.

l PERFORMANCE EVALUATION OF CORROSION INHIBITORS FOR LOCAL CONDITIONS. Masters thesis, King Fahd University of Petroleum and Minerals.

l A STUDY ON UTILIZING CHEMICAL INHIBITORS IN NEW REINFORCED CONCRETE STRUCTURES. Masters thesis, King Fahd University of Petroleum and Minerals.

l A PARETO FRONTIER WELL PLACEMENT AND RATE OPTIMIZATION. Masters thesis, King Fahd University of Petroleum and Minerals.

l A Numerical Modeling Approach for Transformation-Induced Failures. Masters thesis, King Fahd University of Petroleum and Minerals.

l AUTHORSHIP ATTRIBUTION OF ARABIC TEXTS. Masters thesis, King Fahd University of Petroleum and Minerals.

l ESTIMATION OF DUST AND SAND INDUCED IMPAIRMENTS ON SATELLITE LINKS. Masters thesis, King Fahd University of Petroleum and Minerals.

l IMPACT OF CODE CLONING ON FUNCTIONAL CORRECTNESS OF OBJECT-ORIENTED CLASSES. Masters thesis, King Fahd University of Petroleum and Minerals.

l Adaptive Formation Control Of a Fleet Of Underwater Vehicle-Manipulator System. Masters thesis, King Fahd University of Petroleum and Minerals.

l A MODEL OF NEAR-ZERO ENERGY HOME (nZEH) USING PASSIVE DESIGN STRATEGIES AND PV TECHNOLOGY IN HOT CLIMATES. Masters thesis, King Fahd University of Petroleum and Minerals.

l COOPERATIVE SPECTRUM SENSING/ACCESS IN COGNITIVE RADIO NETWORKS. PhD thesis, King Fahd University of Petroleum and Minerals.

l EVALUATION OF THE COGNITIVE EFFECTIVENESS FOR THE VISUAL SYNTAX OF FEATURE DIAGRAMS AND SECURE TROPOS. Masters thesis, King Fahd University of Petroleum and Minerals.

l Towards the retrieval of reusable software artifacts. PhD thesis, King Fahd University of Petroleum and Minerals.

l Performance of Fluoro-Surfactant with Supercritical CO2 Flooding in High Salinity Carbonate Reservoirs. Masters thesis, King Fahd University of Petroleum and Minerals.

l In Situ Copolymerization of Ethylene & Propylene In The presence of Titania Nanofillers. PhD thesis, King Fahd University of Petroleum and Minerals.

l AN APPROACH TO IDENTIFY THE DISEASE-GENE ASSOCIATION THROUGH BIOLOGICAL NETWORKS TOPOLOGICAL FEATURES. Masters thesis, King Fahd University of Petroleum and Minerals.

l FAST EQUALIZATION ALGORITHMS FOR WIDE BAND WIRELESS COMMUNICATION SYSTEMS. PhD thesis, King Fahd University of Petroleum and Minerals.

l DERIVATIZATION FOLLOWED BY GC/MS ANALYSIS OF ORGANOTINS & HALOACETIC ACIDS IN ENVIRONMENTAL SAMPLES. Masters thesis, King Fahd University of Petroleum and Minerals.

l Preparation and characterization of high density polyethylene/graphene nanocomposites by in-situ polymerization. Masters thesis, King Fahd University of Petroleum and Minerals.

l Modeling of Cyclic Behavior of Retrofitted Beam-Column Joint. PhD thesis, King Fahd University of Petroleum and Minerals.

l Synthesis of a New Class of Linear and Cross-linked Polyzwitterion-anions and Their Applications as Corrosion Inhibitors and Adsorbents. PhD thesis, King Fahd University of Petroleum and Minerals.

l Silicoalumino Phosphate SAPO-34 Grown on SiC Foam as Structured Catalyst for Methanol Dehydration to Dimethyl Ether. Masters thesis, King Fahd University of Petroleum and Minerals.

l ANOMALY DETECTION IN INDUSTRIAL CONTROL NETWORKS. Masters thesis, King Fahd University of Petroleum and Minerals.

l PERFORMANCE ANALYSIS OF KU BAND DVB-S2 VSAT SYSTEM UNDER DUST AND SAND STORMS. Masters thesis, King Fahd University of Petroleum and Minerals.

l Controlled Access to Cloud Resources for Mitigating Economic Denial of Sustainability (EDoS) Attack. Masters thesis, King Fahd University of Petroleum and Minerals.

l New Algorithms for Deep Learning Machines. Masters thesis, King Fahd University of Petroleum and Minerals.

l Heat Transfer Enhancement of Nanofluid using Raw, Chemically Modified and Impregnated Carbon Nanotubes. Masters thesis, King Fahd University of Petroleum and Minerals.

l THE IMPACT OF COST AND FOULING ON HEAT EXCHANGER INVENTORY IN POWER AND REFRIGERATION SYSTEMS. PhD thesis, King Fahd University of Petroleum and Minerals.

l DECISION SUPPORT SYSTEM FOR RISK AND WATER QUALITY MANAGEMENT IN WATER DISTRIBUTION NETWORK. PhD thesis, King Fahd University of Petroleum and Minerals.

l Digital Outcrop Modeling of The Early Triassic Upper Khartam Member of Khuff Formation; Implications for Reservoir Heterogeneity and Quality, Central Saudi Arabia. Masters thesis, King Fahd University of Petroleum and Minerals.

l Sedimentological and stratigraphic studies of the Cambro-Ordovician succession in northwest Saudi Arabia. Masters thesis, King Fahd University of Petroleum and Minerals.

l A PWM BASED SERIES COMPENSATOR FOR POWER SYSTEM STABILITY ENHANCEMENT. Masters thesis, King Fahd University of Petroleum and Minerals.

l Power Quality Assessment of High Penetration Renewable Source in Distribution Grids. Masters thesis, King Fahd University of Petroleum and Minerals.

l Experimental & Numerical Investigations of Oxy-fuel Combustion Using Porous Plate Reactor. Masters thesis, King Fahd University of Petroleum and Minerals.

l PRESSURE TRANSIENT TESTING OF U-SHAPED HORIZONTAL WELLS. PhD thesis, King Fahd University of Petroleum and Minerals.

l PERFORMANCE EVALUATION OF TWO WSN GENERATIONS IN RE-AL ENVIRONMENTS. Masters thesis, King Fahd University of Petroleum and Minerals.

l INFLUENCE OF NANOADDITIVES ON THE RHEOLOGY AND THERMAL PROPERTIES OF VISCOELASTIC SURFACTANT USED IN MATRIX ACIDIZING. Masters thesis, King Fahd University of Petroleum and Minerals.

l Identification and Control of Glass Furnace. Masters thesis, King Fahd University of Petroleum and Minerals.

l Impact of Injection Water chemistry on Zeta Potential of Carbonate Rocks. Masters thesis, King Fahd University of Petroleum and Minerals.

l CERIUM MODIFIED NICKEL AND IRON BASED OXYGEN CARRIERS FOR CHEMICAL LOOPING COMBUSTION. Masters thesis, King Fahd University of Petroleum and Minerals.

l A Framework for the Identification and Communication of Client and User Requirements to Design Teams. Masters thesis, King Fahd University of Petroleum and Minerals.

l DISPERSIVE TIME DOMAIN BEAM PROPAGATION METHOD FOR ANALYZING OPTICAL DEVICES. PhD thesis, King Fahd University of Petroleum and Minerals.

l Evaluating the Effectiveness of Methods for Converting Ranking into Weights with Application for Maintenance Contractor Selection. Masters thesis, King Fahd University of Petroleum and Minerals.

l Experimental Enhancement of Single Slope Solar Still. Masters thesis, King Fahd University of Petroleum and Minerals.

This list was generated on Thu Oct 30 13:48:32 2014 AST.