KFUPM ePrints

Items where Subject is "Mechanical"

Up a level
Export as [feed] RSS 2.0 [feed] RSS 1.0 [feed] Atom
Group by: Creators | Item Type
Jump to: A | B | C | E | F | G | H | I | J | K | M | N | Q | R | S | T | Y
Number of items at this level: 281.

A

AL-ANAZI, KHALID Q. (2010) LARGE EDDY SIMULATION OF THE FLOW AROUND BLUFF BODY WITH DRAG REDUCTION DEVICE. Masters thesis, King Fahd University of Petroleum and Minerals.

AL-FIFI, SALMAN (2010) EXPERIMENTAL AND NUMERICAL STUDY OF OPEN-AIR ACTIVE COOLING. Masters thesis, King Fahd University of Petroleum and Minerals.

AL-OTAIBI, DHAWI ABDULRAHMAN (2009) Experimental Comparison of Calcium Sulfate (CaSO4) Scale Deposition on Coated Carbon Steel and Titanium Surfaces. Masters thesis, King Fahd University of Petroleum and Minerals.

AL-SUWAIYEL, MOHAMMED A. (2010) WATER WAVE PROPAGATION ON NONUNIFORM BOTTOM. Masters thesis, King Fahd University of Petroleum and Minerals.

ALHINDI, ISMAIL (2009) PARAMETRIC STUDY OF SHORT PERIODIC SPEED CONTROL HUMPS ON A ROAD VEHICLE DYNAMIC. Masters thesis, King Fahd University of Petroleum and Minerals.

Abdallah, Ayman M. ME 204 Design Problem Project. Project Report. AE Department. (Submitted)

Abdallah, Ayman M. ME-489 FEA in Mechanical Engineering_Project Final Report. Project Report. AE Department. (Submitted)

Abdallah, Yousef A. Ghaffar (1976) Tooth tip losses in external gear pumps. Masters thesis, King Fahd University of Petroleum and Minerals.

Abdul Gaffar, Mohammed Salman (2002) A Study of dehumidification and regeneration processes in a hybrid cooling system. Masters thesis, King Fahd University of Petroleum and Minerals.

Abdul Qaiyum, Shaik (2005) Modelling of blood flow in a time-varying shape passage. Masters thesis, King Fahd University of Petroleum and Minerals.

Abdul-Nabi, Dawoud Yaagoub Shehadah (1986) Analytical calculation of bow shock waves from delta shaped supersonic lifting wings. Masters thesis, King Fahd University of Petroleum and Minerals.

Abdulhafez Shabaneh, Islam (2011) PERFORMANCE CHARACTERISTICS OF SOLAR AIR HEATED HDH DESALINATION SYSTEM. Masters thesis, King Fahd University of Petroleum and Minerals.

Abdulsamad, Mohammed (1997) A methodology for the optimization of rolling process. Masters thesis, King Fahd University of Petroleum and Minerals.

Abidogun, Kamorudeen Babatunde (1996) Analysis of turbulent transport properties in a swirling flow of a Can-type combustor. Masters thesis, King Fahd University of Petroleum and Minerals.

Abidogun, Kamorudeen Babatunde. (2000) An experimental investigation of stall characteristics in a vaneless diffuser. PhD thesis, King Fahd University of Petroleum and Minerals.

Abu-Saleh, Muhammad Khaldoun Abdul-Gader (1987) Experiments on a flat square plate at high angles of attack. Masters thesis, King Fahd University of Petroleum and Minerals.

Adeleke, Adeyinka Hakeem (2001) Effect of intermetallic phases on corrosion of Aluminum-Silicon Carbide (Al-SiCp) composites. Masters thesis, King Fahd University of Petroleum and Minerals.

Adewusi, Surajudeen Adedotun (2000) Detection of a transverse crack in a rotating shaft using wavelet transform. Masters thesis, King Fahd University of Petroleum and Minerals.

Adinoyi, Muhammed Jamiu (2010) Effect of Sonication Time and Clay Loading on Nanoclay Dispersion, Tensile and Hardness Properties of Epoxy-Clay Nanocomposite. Masters thesis, King Fahd University of Petroleum and Minerals.

Ahmad, Aftab (1988) Investigations on a flat, square plate at high incidence in a low speed flow. Masters thesis, King Fahd University of Petroleum and Minerals.

Ahmad, Shaik Ilias (1996) Three-dimensional transient temperature analysis of friction welding of cylindrical bars. Masters thesis, King Fahd University of Petroleum and Minerals.

Ahmad, Syed Zafar (1982) Analysis of turbulent, axisymmetric, dense jets discharged to quiescent, uniform or stratified ambients. Masters thesis, King Fahd University of Petroleum and Minerals.

Ahmed, C. S. Khalid (1996) Hybrid liquid desiccant based air-conditioning system. Masters thesis, King Fahd University of Petroleum and Minerals.

Ahmed, Eball Hifthy (1992) Numerical simulation of ice crystal growth (initial frosting process). Masters thesis, King Fahd University of Petroleum and Minerals.

Ahmed, Eball Hifthy A. (1992) Numerical Simulation of Ice Crystal Growth (Initial Frosting Process). Masters thesis, KING FAHD UNIVERSITY OF PETROLEUM & MINERALS.

Ahmed, Eball Hifthy Abdul-Rahim (1996) Mixed convection from an elliptic tube placed in a fluctuating free stream. PhD thesis, King Fahd University of Petroleum and Minerals.

Ahmed, Mohammed Khaleel (2005) Effect of outflow orientation and multiple jets orifice plate configurations on heat transfer in a rectangular duct. Masters thesis, King Fahd University of Petroleum and Minerals.

Ahmed, Mohi Uddin (1984) Stochastic approach for modeling machining process variables. Masters thesis, King Fahd University of Petroleum and Minerals.

Ahmed, Muhammad Naweed (1995) Computational study of the flowfield through a cascade of NACA 0012 Airfoils. Masters thesis, King Fahd University of Petroleum and Minerals.

Ahmed, Mujahed (2004) Cryogenic drilling of KevlarTM composite laminates. Masters thesis, King Fahd University of Petroleum and Minerals.

Ahmed, Neaz (1993) Comparative study of different methods of vibration control of rotor bearing systems. Masters thesis, King Fahd University of Petroleum and Minerals.

Ahmed, Rashid Waheed Khalid (1990) Modelling of chemical kinetics of methane/nitrogen dioxide/oxygen flames. Masters thesis, King Fahd University of Petroleum and Minerals.

Ahmed, Syed Manzoor (1985) Heat convection from a horizontal cylinder in a quiescent fluid. Masters thesis, King Fahd University of Petroleum and Minerals.

Ahmed, Syed Younus (1997) Liquid desiccant and its application for pipeline drying. Masters thesis, King Fahd University of Petroleum and Minerals.

Akhtar, Syed Sohail (2009) Analysis and Modeling of Hot Extrusion Die for its Service Life Enhancement. PhD thesis, King Fahd University of Petroleum and Minerals.

Al Athel, Khaled S. (2005) Effect of piezoelectric actuator placement on controlling the modes of vibration for flexible structures. Masters thesis, King Fahd University of Petroleum and Minerals.

Al Athel, Khaled S. (2005) Effect of piezoelectric actuator placement on controlling the modes of vibration for flexible structures. Masters thesis, King Fahd University of Petroleum and Minerals.

Al Bin Mousa, Jafar Husain (2006) Experimental and numerical analyses of mixed mode crack initiation angle. Masters thesis, King Fahd University of Petroleum and Minerals.

Al Bin Mousa, Jafar Husain (2006) Experimental and numerical analyses of mixed mode crack initiation angle. Masters thesis, King Fahd University of Petroleum and Minerals.

Al-Anazi, Dahham Matar (2001) Weibull reliability analysis and maintenance strategies of rotating equipment. Masters thesis, King Fahd University of Petroleum and Minerals.

Al-Aqeeli, N. and Gandhidasan, P. THE USE OF AN OPEN CYCLE ABSORPTION SYSTEM IN AUTOMOBILES AS AN ALTERNATIVE TO CFCS. The 6th Saudi Engineering Conference, KFUPM, Dhahran, December 2002.

Al-Aqeeli, Naser M. (2002) Oxidation/carburization behavior of high temperature alloys. Masters thesis, King Fahd University of Petroleum and Minerals.

Al-Attas, Muhsen Ali (1992) Unsteady Natural Convection in Open Ended Vertical Concentric Annuli. Masters thesis, KING FAHD UNIVERSITY OF PETROLEUM & MINERALS.

Al-Attas, Muhsen Ali (1992) Unsteady natural convection in open ended vertical concentric annuli. Masters thesis, King Fahd University of Petroleum and Minerals.

Al-Bagawi, Jamil Jarallah Awadh (1994) Energy and exergy analysis of Ghazlan Power Plant. Masters thesis, King Fahd University of Petroleum and Minerals.

Al-Bagawi, Jamil Jarallah Awadh (2002) Fouling analysis and its mitigation in heat exchangers. PhD thesis, King Fahd University of Petroleum and Minerals.

Al-Bazroon, Hussain Abdulla (1992) Experimental Determination of Heat Transfer Coefficient for Water-Lithium Bromide Mixture. Masters thesis, KING FAHD UNIVERSITY OF PETROLEUM & MINERALS.

Al-Bazroon, Hussain Abdulla (1992) Experimental determination of heat transfer coefficient for water-lithium bromide mixture. Masters thesis, King Fahd University of Petroleum and Minerals.

Al-Bedoor, B. O. and Ghouti, L. ON THE INVESTIGATION OF VIBRATION SIGNALS USING JOINT TIME FREQUENCY ANALYSIS. The 6th Saudi Engineering Conference, KFUPM, Dhahran, December 2002.

Al-Bedoor, Bassem Odeh (1995) Dynamic modeling and analysis of axially moving beam with prismatic and revolute joints. PhD thesis, King Fahd University of Petroleum and Minerals.

Al-Dawood, Ali Mohammad (1998) Effects of blending MTBE, methanol, or ethanol with gasoline on performance and exhaust emissions of SI engines. Masters thesis, King Fahd University of Petroleum and Minerals.

Al-Dini, Salem Ahmed. (1997) An experimental investigation for the effect of pulsation on heat transfer characteristics in pipes. Masters thesis, King Fahd University of Petroleum and Minerals.

Al-Dossary, Rashid / M. A. (2009) The Effect of Magnetic Field on Combustion and Emissions. Masters thesis, King Fahd University of Petroleum and Minerals.

Al-Fadhli, Hussain Yahya (2003) Performance evaluation of (HVOF) thermal spray coating using INCONEL-625 powder. Masters thesis, King Fahd University of Petroleum and Minerals.

Al-Farayedhi, A. and Gandhidasan, P. and A. Antar, M. and Abdul Gaffar, M. S. EXPERIMENTAL STUDY OF HYBRID LIQUID DESICCANT BASED VAPOR COMPRESSION COOLING SYSTEM. The 6th Saudi Engineering Conference, KFUPM, Dhahran, December 2002.

Al-Farayedhi, Abdulghani A. FUEL CONSUMPTION OF A SPARK IGNITION ENGINE BLENDED WITH MTBE. The 6th Saudi Engineering Conference, KFUPM, Dhahran, December 2002.

Al-Farayedhi, Abdulghani Abdallah (1979) A Comoputer-assisted analysis for thermodynamic processes and cycles. Masters thesis, King Fahd University of Petroleum and Minerals.

Al-Gahtani, Husain (2001) Dynamic response of fluid-loaded composite plates to stationary and moving loads. Masters thesis, King Fahd University of Petroleum and Minerals.

Al-Garni, Abdullah Mohammed (1999) Wind tunnel testing of an airfoil with a moving surface boundary-layer control. Masters thesis, King Fahd University of Petroleum and Minerals.

Al-Garni, A. Z., Saeed, F., and Al-Asaly, A. (2007) Submersible Craft for Water Purification. 7168387.

Al-Ghamdi, Fayez Hasen Mohammed (2004) Transient impulsive flow about a sphere in a gas stream. Masters thesis, King Fahd University of Petroleum and Minerals.

Al-Habib, Fathi Hussain Muhammad (1999) The effect of aging on the fatigue strength of alloy 800HT. Masters thesis, King Fahd University of Petroleum and Minerals.

Al-Hadhrami, Luai M. Al-Hamas (1996) Analysis of turbulent transport properties in the near field of an isothermal free jet. Masters thesis, King Fahd University of Petroleum and Minerals.

Al-Hamed, Adel Sulaiman Hamad (1990) Determining velocity, temperature and occupancy comfort within a 3-D room. Masters thesis, King Fahd University of Petroleum and Minerals.

Al-Harthi, mamdouh Influence of water immersion on the single-lap shear strength of aluminum joints bonded with aluminum-powder-filled epoxy adhesive. Journal of Adhesion Science and Technology.

Al-Hussain, Khaleel Ma'tuq (1999) Torsional vibrations analysis of a synchronous motor-compressor drive train. Masters thesis, King Fahd University of Petroleum and Minerals.

Al-Mesfer, Abdullah Ali (2009) EFFECT OF FLUID HYDRODYNAMICS ON CALCIUM SULFATE "CASO4" DEPOSITION ON ALUMINUM METAL SURFACE. Masters thesis, King Fahd University of Petroleum and Minerals.

Al-Mulhim, Khalid Abdulaziz Abdullah (2000) Transient temperature distibution in a tubesheet of a fixed tubesheet heat exchanger. Masters thesis, King Fahd University of Petroleum and Minerals.

Al-Muslim, Husain Muhammad (2002) Energy and exergy analyses of crude oil distillation plants. Masters thesis, King Fahd University of Petroleum and Minerals.

Al-Muslim, Husain Muhammad (2010) Impact of Combined Mechanical Damage on the Integrity of Pipelines. PhD thesis, King Fahd University of Petroleum and Minerals.

Al-Mutairi, Musaad Ali (2000) Heat and mass transfer analysis of liquid desiccant-air contact system in a gauze-type structured packing tower. Masters thesis, King Fahd University of Petroleum and Minerals.

Al-Naglah, Muammar Abdallah (1997) Second-law-based thermoeconomic analysis and optimization of thermal-energy-storage systems. Masters thesis, King Fahd University of Petroleum and Minerals.

Al-Nassar, Yaagoub Nassar (1981) Effect of speed control humps on vehicle dynamics. Masters thesis, King Fahd University of Petroleum and Minerals.

Al-Nasser, Adel Mohammed Hussain (2003) Optimization of a packaged air conditioning unit performance using an experimentally validated CFD model. Masters thesis, King Fahd University of Petroleum and Minerals.

Al-Omari, Ahmed S. (2010) FINITE ELEMENT MODELING OF RING SPLITTING TEST TO PREDICT RESIDUAL STRESSES IN SPIRAL WELDED PIPE. Masters thesis, King Fahd University of Petroleum and Minerals.

Al-Qahtani, Mohhmad Shayea Ali (1995) Forced flow in the entry region of concentric annuli with impulsively rotated inner walls. Masters thesis, King Fahd University of Petroleum and Minerals.

Al-Qahtani, Turki Abdul-Aziz (2005) Effects of strain rate and temperature on fracture toughness and tensile properties of CPVC. Masters thesis, King Fahd University of Petroleum and Minerals.

Al-Qutub, Amro Mohammad (1992) Supersonic Jet Impingement on a Flat Surface at Angles from -50 to -300. Masters thesis, KING FAHD UNIVERSITY OF PETROLEUM & MINERALS.

Al-Qutub, Amro Mohammad (1992) Supersonic jet impingement on a flat surface at angles from -5° to 30°. Masters thesis, King Fahd University of Petroleum and Minerals.

Al-Refai, Abdurrahman Saleh (1997) Surface roughness measurement using laser detection technique. Masters thesis, King Fahd University of Petroleum and Minerals.

Al-Regib, Emad Ibrahim (1994) Nonholonomic motion planning for wheeled mobile systems using geometric phases. Masters thesis, King Fahd University of Petroleum and Minerals.

Al-Shammary, Rakan A. (2005) FATIGUE BEHAVIOUR OF HIC DAMAGED LINE PIPE STEEL. Masters thesis, King Fahd University of Petroleum and Minerals.

Al-Shurafa, Ali M. (2004) Investigations on the influence of disk location and unbalance on fluid induced vibrations of a shaft-disk-bearing system. Masters thesis, King Fahd University of Petroleum and Minerals.

Al-Sulaiman, Fahad A. (2003) Test facility development for small centrifugal compressors (design stage). Masters thesis, King Fahd University of Petroleum and Minerals.

Al-Zaharnah, Ihab Talal (1996) Quantitative and subjective assessments of indoor air quality in KFUPM buildings. Masters thesis, King Fahd University of Petroleum and Minerals.

Al-Zahrnah, Iyad Talal (1993) Performance Evaluation and Multiobjective Optimization of Passive Vehicle Suspension Systems. Masters thesis, KING FAHD UNIVERSITY OF PETROLEUM & MINERALS.

Al-Zahrnah, Iyad Talal (1993) Performance evaluation and multiobjective optimization of passive vehicle suspension systems. Masters thesis, King Fahd University of Petroleum and Minerals.

Al-Zayer, Ali Dhaif (2001) Analytical and finite element investigation of initial clearance effect on tube-to-tubesheet joint strength. Masters thesis, King Fahd University of Petroleum and Minerals.

Alam, Mansoor (1988) A generalized approach to the machining economics optimization. Masters thesis, King Fahd University of Petroleum and Minerals.

Alnaser, Hussein A. (2002) Finite element dynamic analysis of drillstring. Masters thesis, King Fahd University of Petroleum and Minerals.

Antar, Mohamed Abdelkarim Mohamed (1996) Analysis of fluid flow and heat transfer around and inside a liquid sphere. PhD thesis, King Fahd University of Petroleum and Minerals.

Anwar, Sohail (2003) Natural convection flow in parallel-plate vertical channels. Masters thesis, King Fahd University of Petroleum and Minerals.

Arshed, Ghulam Murshed (2003) Transiently developing free and opposing jets in relation to gas-assisted laser evaporative heating process. Masters thesis, King Fahd University of Petroleum and Minerals.

Asghar, Asad (1992) Experimental investigations of the vortex flow behind a circular cone at high angles of attack. Masters thesis, King Fahd University of Petroleum and Minerals.

Asif, Mohammed (1995) Assessment, prediction and enhancement of the reliability of extrusion dies. Masters thesis, King Fahd University of Petroleum and Minerals.

Ayinde, Taofeek Foluso (2002) Wakel flow with varying separatin points. PhD thesis, King Fahd University of Petroleum and Minerals.

B

Badar, Mohammad Affan (1993) An Expert System for Designing Hydrodynamic Journal Bearings. Masters thesis, KING FAHD UNIVERSITY OF PETROLEUM & MINERALS.

Badar, Mohammad Affan (1993) An expert system for designing hydrodynamic journal bearings. Masters thesis, King Fahd University of Petroleum and Minerals.

Bagalagel, Saleh Mahfoudh (2001) The Effect of temperature dependent viscosity variation on the performance of heat exchangers. Masters thesis, King Fahd University of Petroleum and Minerals.

Bahaidarah, Haitham M.S (1999) Design and performance evaluation of evaporative cooling towers. Masters thesis, King Fahd University of Petroleum and Minerals.

Bakhashwain, J.M. and Sunar, M. and Hyder, S.J. (2004) Finite Element Modeling of Magnetostrictive Smart Structures. The Arabian Journal for Science and Engineering, 29 (1C). pp. 125-138.

Basha, Mehaboob N. B. (2005) Prediction of turbulent heat transfer in a rotating narrow rectangular channel (AR=10) oriented at 120° from the direction of rotation. Masters thesis, King Fahd University of Petroleum and Minerals.

Bashmal, Salem Mohamed (2005) Finite element analysis of stick-slip vibrations in drillstrings. Masters thesis, King Fahd University of Petroleum and Minerals.

Bashmal, Salem Mohamed (2005) Finite element analysis of stick-slip vibrations in drillstrings. Masters thesis, King Fahd University of Petroleum and Minerals.

Bazoune, Abdelaziz (1990) Vibration frequencies of rotating tapered beam including rotary inertia and transverse shear deformation. Masters thesis, King Fahd University of Petroleum and Minerals.

Butt, Rasheed Ahmed (1994) Design of composite die for wire drawing. Masters thesis, King Fahd University of Petroleum and Minerals.

C

Charifa, Mohammad Samer (2005) Continuous proximate time-optimal control for a third order servomechanism having a plant with three real roots. Masters thesis, King Fahd University of Petroleum and Minerals.

E

El-Shaarawi, Maged A. I. and Mokheimer, Esmail M. A. and Jamal, Ahmad (2005) Conjugate Effects on Steady Laminar Natural Convection Heat Transfer in Vertical Eccentric Annuli. International Journal for Computational Methods in Engineering Science and Mechanics, 6 (4). pp. 235-250.

El-Sinawi, A. and Hamdan, M. N. TIP DEFLECTION ESTIMATION OF A ROTATING CANTILEVERED BEAM. The 6th Saudi Engineering Conference, KFUPM, Dhahran, December 2002.

F

Faheem, Mohammad (2003) A Study of tensile and microhardness properties of m-LLDPE/LDPE blends. Masters thesis, King Fahd University of Petroleum and Minerals.

Fallatah, Gasem M. and Sheikh, Anwar K. and Khan, Zafarullah and Boah, John K. RELIABILITY OF DISSIMILAR METAL WELDS SUBJECTED TO SULFIDE STRESS CRACKING. The 6th Saudi Engineering Conference, KFUPM, Dhahran, December 2002.

Fallatah, Gasem Mohammed (2001) Sulfide stress cracking of dissimilar metal welds. Masters thesis, King Fahd University of Petroleum and Minerals.

Fallatah, Wael Sulaiman (2010) A study of Mechanical Properties and Processability of Blown Films Using b-LLDPE and LDPE Blends. Masters thesis, King Fahd University of Petroleum and Minerals.

Farooqi, Johar Khurshid (1996) Fatigue damage characterization and life prediction in carbon fiber reinforced plastic composites. Masters thesis, King Fahd University of Petroleum and Minerals.

Fazil, Syed (1988) Integral methods for transpired boundary layer flow. Masters thesis, King Fahd University of Petroleum and Minerals.

Felemban, Mamdouh B (1989) Vibration analysis of point and column supported mindlin plates. Masters thesis, King Fahd University of Petroleum and Minerals.

Fregeau, M and Saeed, F and Paraschivoiu, I. (2005) Numerical Correlations for Heat Transfer From an Array of Hot-Air Jets Impinging on a 3D Concave Surface. AIAA Journal of Aircraft, 42 (3). pp. 665-670.

G

Gasem, Zuhair M. and Al-Qutub, Amro M. CORROSION BEHAVIOR OF POWDER METALLURGY ALUMINUM ALLOY 6061/AL2O3 METAL MATRIX COMPOSITES. The 6th Saudi Engineering Conference, KFUPM, Dhahran, December 2002.

Gasem, Zuhair Mattoug (1992) Fatigue Life Predictions of Notched Members in Arabian Gulf Water. Masters thesis, KING FAHD UNIVERSITY OF PETROLEUM & MINERALS.

Gasem, Zuhair Mattoug (1992) Fatigue life predictions of notched members in Arabian Gulf Water. Masters thesis, King Fahd University of Petroleum and Minerals.

Gayazullah, Mohammed (2004) Entropy generation around a solid sphere in a gas stream. Masters thesis, King Fahd University of Petroleum and Minerals.

Gbadebo, Semiu Adesina (1996) An experimental investigation of heat transfer in the thermally developing region of a pulsating pipe flow. Masters thesis, King Fahd University of Petroleum and Minerals.

Ghaith, Fadi (2009) Dynamic Modeling of Rotating Flexible Pipe Conveying Fluid and Subjected to External Axial Flow. PhD thesis, King Fahd University of Petroleum and Minerals.

Ghouti, L. (2004) SHAFT LATERAL AND TORSIONAL VIBRATION RESPONSES TO BLADE(S) RANDOM VIBRATION EXCITATION. The Arabian Journal for Science and Engineering, 29 (1C). pp. 39-67.

H

Hafeez, Syed (2005) A study of the static and dynamic properties of Al-Based A1₂O₃ metal matrix composites. Masters thesis, King Fahd University of Petroleum and Minerals.

Haider, Saiyet Aijaz (1999) Conjugate forced convection heat transfer in eccentric annuli. Masters thesis, King Fahd University of Petroleum and Minerals.

Hussain, Mohammed Mujtaba (2001) Investigation of heat and moisture transfer during solids drying. Masters thesis, King Fahd University of Petroleum and Minerals.

Hussain, Shaik Palur Akbar (1997) Role of sodium chloride in low temperaturs hot corrosion of superalloys. Masters thesis, King Fahd University of Petroleum and Minerals.

Hussaini, Irfan Saif (1997) Performance evaluation of shell-and-tube heat exchangers: a numerical approach. Masters thesis, King Fahd University of Petroleum and Minerals.

Hyder, Syed Jaleeluddin (1997) A Robust design methodology for structural control using piezoelectric materials. Masters thesis, King Fahd University of Petroleum and Minerals.

I

Iqbal, Mohammad Owais (1998) Numerical investigation of pulsating flows in abrupt expansion pipes. Masters thesis, King Fahd University of Petroleum and Minerals.

Irfan-ul-Haq, Muhammad (2000) Crack propagation in CPVC at different temperatures. Masters thesis, King Fahd University of Petroleum and Minerals.

Ismail, Basel (1992) Optimal Assessment of Using Solar and Wind Power for Desalination on the Eastern Coast of Saudi Arabia. Masters thesis, KING FAHD UNIVERSITY OF PETROLEUM & MINERALS.

Ismail, Basel (1992) Optimal assessment of using solar and wind power for desalination on the Eastern coast of Saudi Arabia. Masters thesis, King Fahd University of Petroleum and Minerals.

J

Jamal, Ahmad (2002) Conjugate free convection heat transfer in vertical eccentric annuli. Masters thesis, King Fahd University of Petroleum and Minerals.

K

Kabir, Muhammad Ehsanul (2005) Numerical investigation of erosion of a pipe protruded in a sudden contraction. Masters thesis, King Fahd University of Petroleum and Minerals.

Khalifa, Atia (2009) EXPERIMENTAL AND NUMERICAL INVESTIGATION OF FLOW INDUCED VIBRATION IN A HIGH PRESSURE DOUBLE VOLUTE CENTRIFUGAL PUMP. PhD thesis, King Fahd University of Petroleum and Minerals.

Khan, Jameel Ur Rehman (1997) Design and performance evaluation of refrigeration systems using thermodynamic models. Masters thesis, King Fahd University of Petroleum and Minerals.

Khan, Mohammad Sultan (1996) Effect of thermal-hydraulic parameters on CaCO₃ scalling in heat exchangers. Masters thesis, King Fahd University of Petroleum and Minerals.

Khan, Mohammed Abdul Razzaq (1996) Numerical simulation of turbulent natural convection in enclosures. Masters thesis, King Fahd University of Petroleum and Minerals.

Khan, Ovaisullah (2002) Thermo-mechanical modeling of tool and workpiece interface in metal forming process. Masters thesis, King Fahd University of Petroleum and Minerals.

Khan, Rehan Ikram (2000) Effect of temperature on the fatigue behavior of plain weave woven carbon fabric-reinforced composite plastic. Masters thesis, King Fahd University of Petroleum and Minerals.

Khan, Shafique Mohammad Ahmed. (1999) Investigation of mixed mode crack initiation angles under different loading conditions. Masters thesis, King Fahd University of Petroleum and Minerals.

Khan, Shamsul Hoda (1992) Second-Law-Based Thermodynamic Analysis of Vapor-Compression Refrigeration Cycles. Masters thesis, KING FAHD UNIVERSITY OF PETROLEUM & MINERALS.

Khan, Shamsul Hoda (1992) Second-law-based thermodynamic analysis of vapor-compression refrigeration cycles. Masters thesis, King Fahd University of Petroleum and Minerals.

Khan, Z. and Khan, R. and Al-Sulaiman, F. and Merah, N. FATIGUE DAMAGE IN WOVEN CARBON FABRIC/EPOXY LAMINATES AT NON-AMBIENT TEMPERATURES. The 6th Saudi Engineering Conference, KFUPM, Dhahran, December 2002.

Khan, Zafar Haidar (1993) Modelling and Antiswing Control of Overhead Cranes. Masters thesis, KING FAHD UNIVERSITY OF PETROLEUM & MINERALS.

Khan, Zafar Haider (1993) Modelling and antiswing control of overhead cranes. Masters thesis, King Fahd University of Petroleum and Minerals.

Khany, Sirajuddin Elyas (1993) Weibull analysis of cutting tools and dies. Masters thesis, King Fahd University of Petroleum and Minerals.

Khany, Sirajuddin Elyas (1993) Weilbull Analysis of Cutting Tools and Dies. Masters thesis, KING FAHD UNIVERSITY OF PETROLEUM & MINERALS.

Khokhar, Aleem Aman (1995) Effect of heat treatment on the flow induced corrosion of aluminum-SiC(p). Masters thesis, King Fahd University of Petroleum and Minerals.

Khurshid, Hassan (2004) Effect of bolt layout on the mechanical behavior of bolted joint. Masters thesis, King Fahd University of Petroleum and Minerals.

M

MELHEM, OMAR A. (2010) THREE-DIMENSIONAL SIMULATION OF LASER GAS-ASSISTED CUTTING: JET IMPINGEMENT CONSIDERATIONS. PhD thesis, King Fahd University of Petroleum and Minerals.

Mahfouz, Fathi Mohammed Abd Al-Azim (1998) Heat convection from an oscillating cylinder. PhD thesis, King Fahd University of Petroleum and Minerals.

Mahmood, Faisal (1999) Transient response of varying thickness timoshenko beam under point load. Masters thesis, King Fahd University of Petroleum and Minerals.

Mahmood, Syed Iftekhar (2004) Impact testing of brittle materials using split hopkinson pressure bar technique. Masters thesis, King Fahd University of Petroleum and Minerals.

Mahrous, Elaf N. (2009) A Continuum Model for Elastic Waves in Embedded Carbon Nanotube Composites. Masters thesis, King Fahd University of Petroleum and Minerals.

Manzoor-ul-Haq, (1995) Reliability-based maintenance strategies for heat exchanges subject to fouling. Masters thesis, King Fahd University of Petroleum and Minerals.

Merah, N. and Al-Zayer, A. and Shuaib, A. and Arif, A. FINITE ELEMENT INVESTIGATION OF INITIAL CLEARANCE EFFECT ON TUBE-TO-TUBESHEET JOINT STRENGTH. The 6th Saudi Engineering Conference, KFUPM, Dhahran, December 2002.

Mirza, Murtuza Ali Baig (2009) FRICTION AND WEAR OF 20% VOLUME FRACTION SUBMICRON Al2O3/6061 ALUMINUM ALLOY COMPOSITE FOR BRAKE SYSTEM APPLICATION. Masters thesis, King Fahd University of Petroleum and Minerals.

Mohiuddin, Mohammed Ahmed (1992) Coupled Bending Torsional Vibration of Rotating Shafts Using Finite Element. Masters thesis, KING FAHD UNIVERSITY OF PETROLEUM & MINERALS.

Mohiuddin, Mohammed Ahmed (1992) Coupled bending torsional vibration of rotating shafts using finite element. Masters thesis, King Fahd University of Petroleum and Minerals.

Mohiuddin, Mohammed Ahmed (1997) Finite element dynamic analysis of multibody rotor-bearing system with cracked shaft. PhD thesis, King Fahd University of Petroleum and Minerals.

Moinuddin, Abdurrahman (2009) THERMAL ANALYSIS AND OPTIMIZATION OF ANNULAR FINS WITH SIMULTANEOUS HEAT AND MASS TRANSFER. Masters thesis, King Fahd University of Petroleum and Minerals.

Mokheimer, Esmail Mohamed Ali (1995) Heat transfer in eccentric annuli. PhD thesis, King Fahd University of Petroleum and Minerals.

Muhanna, Abdullah Moosa (1991) Numerical investigation of laminar natural convection flows in obstructed vertical channels. Masters thesis, King Fahd University of Petroleum and Minerals.

N

Naik, Mohammed Khaliq (2005) The effect of environmental conditions on the hydrostatic burst pressure and impact performance of glass fiber reinforced thermoset pipes. Masters thesis, King Fahd University of Petroleum and Minerals.

Najeeb, Shaik Mohammed (1990) Reliable life prediction models for various material damage processes. Masters thesis, King Fahd University of Petroleum and Minerals.

Naqavi, Iftekhar Zaheer (2001) Conduction and non-conduction limited laser heating process- mathematical simulation. Masters thesis, King Fahd University of Petroleum and Minerals.

Negm, Aboubakr Ahmed Ali. (1998) Conjugate natural convection heat transfer in vertical coconcentric annuli. Masters thesis, King Fahd University of Petroleum and Minerals.

Nizam, Syed Mohtashim (1996) Performance evaluation of a new type of titanium nitride (TiN) coated twist drill. Masters thesis, King Fahd University of Petroleum and Minerals.

Nizami, S. S. A. K. Javeed (1994) Control of hypersonic flight trajectories to minimize heat load. Masters thesis, King Fahd University of Petroleum and Minerals.

Q

QURESHI, BILAL AHMED and ZUBAIR, SYED M. Second-law-based performance evaluation of cooling towers and evaporative heat exchangers. INTERNATIONAL JOURNAL OF THERMAL SCIENCES 46 (2) 2006.

QURESHI, BILAL AHMED and ZUBAIR, SYED M. A comprehensive design and rating study of evaporative coolers and condensers. Part I. Performance evaluation. International Journal of Refrigeration 29 (2006) 645–658.

QURESHI, BILAL AHMED and ZUBAIR, SYED M. A comprehensive design and rating study of evaporative coolers and condensers. Part II. Sensitivity analysis. International Journal of Refrigeration 29 (2006) 659–668.

QURESHI, BILAL AHMED and ZUBAIR, SYED M. An improved non-dimensional model of wet-cooling towers. PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART E-JOURNAL OF PROCESS MECHANICAL ENGINEERING 220 , 2005.

Qamar, S.Z. and Arif, A.F.M. and Sheikh, A. K. and Al-Fuhaid, K.M. SOME OBSERVATIONS ON PRESSURE DISTRIBUTION AND DIE FAILURE MODES IN HOT EXTRUSION. The 6th Saudi Engineering Conference, KFUPM, Dhahran, December 2002.

Qamar, Sayyad Zahid (2004) Modeling and analysis of extrusion pressure and die life for complex aluminum profiles. PhD thesis, King Fahd University of Petroleum and Minerals.

Quddus, Abdul (1986) Heat transfer characteristics of ice solidification using a two-phase closed thermosyphon. Masters thesis, King Fahd University of Petroleum and Minerals.

Qureshi, Bilal Ahmed (2004) Design, rating and exergy analysis of evaporative heat exchangers. Masters thesis, King Fahd University of Petroleum and Minerals.

R

Rabayah, Akram Awni Mohammed Hamad (2002) Finite element modeling and analysis of rotor-bearing systems. Masters thesis, King Fahd University of Petroleum and Minerals.

Rashid, Muhammad. (1997) Mathematical modeling and optimization of precipitation hardening of extrudable aluminium alloys. Masters thesis, King Fahd University of Petroleum and Minerals.

Rauf, Asim (1995) Investigation of fatigue crack growth rates under variable amplitude loading. Masters thesis, King Fahd University of Petroleum and Minerals.

Raza, Muhammad Kamran (1998) Some quality and reliability aspcts of aluminium extrusion process. Masters thesis, King Fahd University of Petroleum and Minerals.

Ruchuan, Yin (2002) Carburization behavior of iron-based alloys in methane/hydrogen gas mixtures. PhD thesis, King Fahd University of Petroleum and Minerals.

S

SALMAN AL-FIFI, SALMAN AL-FIFI ME 413 PROJECR REPORT (SYSTEM CONTROL). Project Report. SALMAN AL-FIFI. (Unpublished)

Saad Bin Mansoor, (2005) Laser evaporative heating in relation to machining. Masters thesis, King Fahd University of Petroleum and Minerals.

Saeed, Farooq and Al-Garni, Ahmed Z. (2007) An Analysis Method for Inertial Particle Separator. AIAA Journal of Aircraft, 44 (4). pp. 1150-1158.

Saeed, Farooq and Al-Garni, Ahmed Z. (2005) Impact of Floating-Point Arithmetic on Engineering Numerical Analysis. ARA Journal, Vol. 2004, No. 28, June 2005, pp. 155-158, 2004 (28). pp. 155-158.

Saghir, Shaikh Farrukh (2004) Effect of frequency on crack propagation in CPVC and HDPE at different temperatures. Masters thesis, King Fahd University of Petroleum and Minerals.

Sami, Muhammad (1993) Heat Transfer Mechanisms Governing Laser Metal Interactions. Masters thesis, KING FAHD UNIVERSITY OF PETROLEUM & MINERALS.

Sami, Muhammad (1993) Heat transfer mechanisms governing laser metal interactions. Masters thesis, King Fahd University of Petroleum and Minerals.

Samivullah, Shaik (2005) Laminar mixed convection in vertical channels. Masters thesis, King Fahd University of Petroleum and Minerals.

Sarfaraz, Ahmed Furquan (2009) EFFECT OF BLEND RATIO OF h-LLDPE WITH LDPE ON THE PROCESSABLITY AND THE MECHANICAL PROPERTIES OF BLOWN FILMS. Masters thesis, King Fahd University of Petroleum and Minerals.

Shafeeq, Mohammed (2006) Effect of environment on the fatigue and the tensile properties of glass fiber reinforced vinyl ester and epoxy thermosets. Masters thesis, King Fahd University of Petroleum and Minerals.

Shahid, Syed Muthee Ulla (1989) Second law analysis and optimization of solar hot water systems. Masters thesis, King Fahd University of Petroleum and Minerals.

Shehata, Ali Abdul-Aziz Mohammad (1994) Mixed convection from a horizontal cylinder rotating in a cooling cross-stream. Masters thesis, King Fahd University of Petroleum and Minerals.

Shuja, Shahzada Zaman (1993) Calculations of fluid flow and heat transfer in expanding ducts. Masters thesis, King Fahd University of Petroleum and Minerals.

Siddique, Ikram-ul-Haq (1995) Calculations of turbulent flow and heat transfer in periodically converging-diverging channels. Masters thesis, King Fahd University of Petroleum and Minerals.

Siddiqui, Bilal (2010) "Reconfigurable Flight Control of a Fighter Aircraft, with Wind Tunnel Study" by Bilal A. Siddiqui, April 2010. Masters thesis, King Fahd University of Petroleum and Minerals.

Siddiqui, Mohsin (1996) Vibration control of rotor-bearing systems using neural networks. Masters thesis, King Fahd University of Petroleum and Minerals.

Sujaulhaq Shafiulhaq, Syed Ammar A. Tirmizi (2010) PERFORMANCE ANALYSIS OF CHILLED WATER SYSTEMS AND THE EFFECT OF INCORPORATION OF EJECTOR COOLING SYSTEM. Masters thesis, King Fahd University of Petroleum and Minerals.

Sunar, Mehmet and Bakhashwain, Jamil M. (2005) A study on thermodynamic potential energy for magnetostrictive system. International Journal of Exergy, 2 (3). pp. 246-259.

Syed, Hussain (2009) Modeling, Analysis and Optimization of the Thermal Performance of Air Conditioners. Masters thesis, King Fahd University of Petroleum and Minerals.

T

Talaq, Jaleel Hasan (1994) Identification of block cascade models of nonlinear systems. Masters thesis, King Fahd University of Petroleum and Minerals.

Y

Yaqub, Mohammed (1990) Prediction of species concentration and temperature profile in methanol oxygen and argon flame. Masters thesis, King Fahd University of Petroleum and Minerals.

Yilbas, Bekir S. and Kassas, M. (2005) Investigation Into The Seebeck Coefficient in Two-Layer Assembly During Laser Short-Pulse Heating. Japanese Journal of Applied Physics, 44 (8). pp. 6068-6074.

Yilbas, Bekir S. and Kassas, M. (2007) Laser Short-Pulse Heating of a Three Layer Assembly and the Seebeck Effect. Journal for Lasers in Engineering, 10. pp. 1-20.

Yu, Jianzhong and Paraschivoiu, I and Saeed, Farooq (2004) An Iterative Inverse Design Method Based on Aerodynamic Streamline Equations. AIAA Journal of Aircraft, 41 (4). pp. 821-828.

This list was generated on Wed Jul 23 00:23:26 2014 AST.