Thesis

DEVELOPMENT AND PERFORMANCE ANALYSIS OF A SOLAR-AUGMENTED CHILLERS FOR HOT AND HUMID CLIMATES. Masters thesis, King Fahd University of Petroleum and Minerals.

Improvement on Seawater Reverse Osmosis Design Integrated with Solar PV System. Masters thesis, King Fahd University of Petroleum and Minerals.

NUMERICAL INVESTIGATION TO IMPROVE ARGON FLOW IN A SELECTIVE LASER MELTING BUILD CHAMBER. Masters thesis, King Fahd University of Petroleum and Minerals.

THE EFFECT OF HUMIDITY ON POWDER CHARACTERISTICS AND PROPERTIES AND ITS IMPACT ON PARTS PRODUCED BY LASER POWDER-BED FUSION ADDITIVE MANUFACTURING. Masters thesis, King Fahd University of Petroleum and Minerals.

HYDROGEN INDUCED CRACKING BEHAVIOR OF HSLA API X65 CARBON STEEL. Masters thesis, King Fahd University of Petroleum and Minerals.

3D PRINTING PLA-GRAPHENE OXIDE NANOCOMPOSITES USING IN-SITU FUSED DEPOSITION MODELING. Masters thesis, King Fahd University of Petroleum and Minerals.

NOVEL CONFIGURATION OF INTEGRATED FORWARD OSMOSIS-REVERSE OSMOSIS SYSTEM. Masters thesis, King Fahd University of Petroleum and Minerals.

SIMULATION OF INERT GAS FLOW AND SPATTER TRAJECTORIES IN LASER POWDER-BED FUSION. Masters thesis, King Fahd University of Petroleum and Minerals.

Investigation of Combustion Characteristics and Static Stability Limits of Hydrogen-Enriched CH4/Air Stratified Flames in a Model GasTurbine Combustor. Masters thesis, King Fahd University of Petroleum and Minerals.

DRAG REDUCTION OF EMULSIFIED ACID SYSTEM IN PIPES. PhD thesis, King Fahd University of Petroleum and Minerals.

Numerical and Experimental Investigation of Coupled Beams Array for Vibration Energy Harvesting Applications. PhD thesis, King Fahd University of Petroleum and Minerals.

Artificial Intelligence-based Secure Formation Maneuver Control of multi‑agent Cyber-Physical Systems with Guaranteed Performance. PhD thesis, King Fahd University of Petroleum and Minerals.

CORROSION BEHAVIOR OF 3D PRINTED 316 L STAINLESS STEEL IN CHLORIDE AND HYDROCARBON ENVIRONMENTS. Masters thesis, King Fahd University of Petroleum and Minerals.

Experimental Investigation of Water Desalination Using Ultrasonic Humidifiers. Masters thesis, King Fahd University of Petroleum and Minerals.

INVESTIGATING THE EFFECT OF ISOTHERMAL AND TEMPERED MICROSTRUCTURES ON THE PASSIVITY AND CORROSION RESISTANCE OF STEEL REBAR IN SIMULATED CONCRETE ENVIRONMENT. PhD thesis, King Fahd University of Petroleum and Minerals.

Online monitoring and detection of rotating cracked-shaft. Masters thesis, King Fahd University of Petroleum and Minerals.

DEVELOP HARD CA-PVD COATING OF CrNiAlSiN FOR HIGHER WEAR-RESISTANT COATING IN INTERNAL COMBUSTION ENGINE. Masters thesis, King Fahd University of Petroleum and Minerals.

GAS-LIQUID FLOW VOID FRACTION PHASE PATTERN IDENTIFICATION USING SLIPPAGE NUMBER. Masters thesis, King Fahd University of Petroleum and Minerals.

DEVELOPMENT AND UTILIZATION OF CNT NANO-LUBRICATION FOR HIGHER MACHINING PERFORMANCE IN HIGH-SPEED HEAVY-DUTY CNC MACHINING. Masters thesis, King Fahd University of Petroleum and Minerals.

Solar-Powered Water Desalination using Multistage Circulating Water Gap Membrane Distillation System. Masters thesis, King Fahd University of Petroleum and Minerals.

Development of Sweeping Gas Membrane Distillation with Jet Impingement Condenser. Masters thesis, King Fahd University of Petroleum and Minerals.

FLOW CONTROL OVER VERTICAL AXIS WIND TURBINE BLADES FOR PERFORMANCE ENHANCEMENT. PhD thesis, King Fahd University of Petroleum and Minerals.

INVESTIGATION OF IMPACT OF SWIRL ON CHARACTERISTICS OF COMBUSTION AND EMISSION OF PREMIXED OXY-METHANE FLAMES IN SWIRL-STABILIZED MODEL GAS TURBINE COMBUSTORS. Masters thesis, King Fahd University of Petroleum and Minerals.

The Effect of Infill Parameters on the Sound Absorption Characteristics of 3D Printed Structures. Masters thesis, King Fahd University of Petroleum and Minerals.

CASING WEAR ANALYSIS IN DIRECTIONAL DRILLING. PhD thesis, King Fahd University of Petroleum and Minerals.

Stability and Control for Grid Connected Renewable Power Systems. Masters thesis, King Fahd University of Petroleum and Minerals.

SOLUTION CRYSTALLIZATION OF POLYCARBONATE SURFACES: DUST REMOVAL FOR SELF CLEANING APPLICATIONS. Masters thesis, King Fahd University of Petroleum and Minerals.

FUNCTIONALLY GRADED HYBRID SIALON-BASED CUTTING TOOLS INSERTS. Masters thesis, King Fahd University of Petroleum and Minerals.

Experimental and Numerical Study of Oxyfuel Combustion in a Dual Annular Counter Rotating Swirl (DACRS) combustor. PhD thesis, King Fahd University of Petroleum and Minerals.

Assessment and Optimization of Integrated Unmanned Aerial Vehicles with Different Renewable Energy Sources. Masters thesis, King Fahd University of Petroleum and Minerals.

ENHANCING THE HOT CORROSION RESISTANCE OF 8 - YTTRIA STABILIZED ZIRCONIA-BASED THERMAL BARRIER COATINGS. PhD thesis, King Fahd University of Petroleum and Minerals.

A NOVEL DESICCANT-BASED HUMIDIFICATION-DEHUMIDIFICATION SYSTEM TO HARVEST FRESHWATER FROM THE ATMOSPHERIC AIR. PhD thesis, King Fahd University of Petroleum and Minerals.

Integration of Sorption and Humidification-Dehumidification Technologies in Hybrid Desalination/Cooling Systems. PhD thesis, King Fahd University of Petroleum and Minerals.

PREPARATION AND CHARACTERIZATION OF GRAPHENE OXIDE/FERRITE COMPOSITE VIA POLYOL METHOD. Masters thesis, King Fahd University of Petroleum and Minerals.

Simultaneous Production of Oxygen and Hydrogen via Water Splitting Using Ba0.5Sr0.5Co0.8Fe0.2O3-δ Membrane. PhD thesis, King Fahd University of Petroleum and Minerals.

Tribological Behaviour of Aluminum Hybrid Nanocomposites reinforced with Alumina and Graphene Oxide. Masters thesis, King Fahd University of Petroleum and Minerals.

Enhanced CVD-grown graphene transfer for solar cell application. Masters thesis, King Fahd University of Petroleum and Minerals.

ANALYSIS OF MATERIAL BEHAVIOR IN METAL ADDITIVE MANUFACTURING (MAM). Masters thesis, King Fahd University of Petroleum and Minerals.

Synthesis and Functionalization of Carbon-based Materials For Electrochemical Conversion of CO2. Masters thesis, King Fahd University of Petroleum and Minerals.

Multi-agent Control of Multiple UAV-Load Systems. PhD thesis, King Fahd University of Petroleum and Minerals.

Date Palm Midrib Fibers as an Ecofriendly Reinforcement in Composite Materials. Masters thesis, King Fahd University of Petroleum and Minerals.

Generalization of Some Inequalities and Applications to Fractional Differential Problems. Masters thesis, King Fahd University of Petroleum and Minerals.

Hydrogen Separation through a Solid Pd-based Membrane (DFT Study). PhD thesis, King Fahd University of Petroleum and Minerals.

ASSESSEMENT OF SOLAR AND WIND POTENTIALS IN KINGDOM OF SAUDI ARABIA AND OPTIMIZATION OF PERTINENT SYSTEMS. Masters thesis, King Fahd University of Petroleum and Minerals.

ANALYSIS AND CONTROL OF DYNAMIC RESPONSE OF BEAMS WITH NON-CLASSICAL BOUNDARY CONDITIONS DUE TO SINUSOIDAL RECIPROCATING LOAD USING FIXED AND MOVING LINEAR SPRING-MASS ABSORBER. Masters thesis, King Fahd University of Petroleum and Minerals.

SWEEPING AIR MEMBRANE DISTILLATION INTEGRATED WITH BUBBLE COLUMN DEHUMIDIFIER FOR WATER DESALINATION. Masters thesis, King Fahd University of Petroleum and Minerals.

MULTI-PHASE FLOW MODELING IN A HELICO-AXIAL ELECTRIC SUBMERSIBLE PUMP OPERATING AT HIGH SPEED AND WITH HIGH GAS VOLUME FRACTION. Masters thesis, King Fahd University of Petroleum and Minerals.

INVESTIGATION OF COMBUSTION AND EMISSION CHARACTERISTICS OF OXY-FUEL FLAMES IN SWIRL-STABILIZED AND MULTI-HOLE TYPE MODEL GAS TURBINE COMBUSTORS. Masters thesis, King Fahd University of Petroleum and Minerals.

Mathematical and Experimental Evaluation of Fin-Based Heat Sink for Cooling PV Module. Masters thesis, King Fahd University of Petroleum and Minerals.

SURFACE TOPOLOGY AND PROPERTIES OF 3D PRINTED TI-6AL-4V & SS316 L. Masters thesis, King Fahd University of Petroleum and Minerals.

NUMERICAL SOLUTION OF RADIATIVE TRANSFER EQUATION IN 2D COMPLEX GEOMETRIES USING BODY-FITTED COORDINATES. Masters thesis, King Fahd University of Petroleum and Minerals.

NUMERICAL INVESTIGATION OF HYDRODYNAMIC AND THERMAL PERFORMANCE OF SILICON CARBIDE AS A SOLAR VOLUMETRIC RECEIVER. Masters thesis, King Fahd University of Petroleum and Minerals.

TWO-WHEELED SINGLE-TRACK VEHICLES SELF BALANCING SYSTEM AND CONTROL DESIGN. Masters thesis, King Fahd University of Petroleum and Minerals.

Solar Assisted Ion Transport Membrane (ITM)/Multi-Hole Burner System for Zero-Emission Power Generation. PhD thesis, King Fahd University of Petroleum and Minerals.

A SIMULATION STUDY OF THE DRAW SOLUTION SEPARATION SYSTEM IN FORWARD OSMOSIS DESALINATION. Masters thesis, King Fahd University of Petroleum and Minerals.

EXPERIMENTAL AND NUMERICAL INVESTIGATION OF PREMIXED OXY COMBUSTION IN A GAS TURBINE MODEL COMBUSTOR ADAPTING MULTI-HOLE BURNER COMBUSTION TECHNOLOGY. PhD thesis, King Fahd University of Petroleum and Minerals.

INVESTIGATION OF WAVE PROPAGATION IN ADVANCED FUNCTIONALLY GRADED CERAMICMETAL PLATES WITH POROSITIES RESTING ON VISCOELASTIC FOUNDATION. Masters thesis, King Fahd University of Petroleum and Minerals.

Membrane Distillation for Water Desalination - Theoretical and Experimental Investigations. PhD thesis, King Fahd University of Petroleum and Minerals.

Vibration Analysis of Rotating Tapered Timoshenko Beam Using Fourier-p Superelement. Masters thesis, King Fahd University of Petroleum and Minerals.

HYGRO-THERMO-MECHANICAL BENDING BEHAVIOR OF ADVANCED FUNCTIONALLY GRADED CERAMIC METAL PLATES RESTING ON VISCOELASTIC FOUNDATIONS. Masters thesis, King Fahd University of Petroleum and Minerals.

FABRICATION AND CHARACTERIZATION OF NANOCRYSTALLINE BISMUTH TELLURIDE BASED SURFACES FOR THERMOELECTRIC APPLICATIONS USING ADVANCED PULSED LASER DEPOSITION. PhD thesis, King Fahd University of Petroleum and Minerals.

CONFIGURATION AND PROTOCOL SETTING FOR INTERNATIONAL LOAD SHARING SYSTEM IN MANUFACTURING AND ITS CHALLENGES IN CONTEXT OF INDUSTRY 4.0 (I4.0) AND INDUSTRIAL INTERNET OF THINGS (IIOT). Masters thesis, King Fahd University of Petroleum and Minerals.

DEVELOPED THERMO-HYDRAULIC MODEL OF DIRECT STEAM GENERATION WITH RELIABLE TWO-PHASE FLOW CONSIDERATION. PhD thesis, King Fahd University of Petroleum and Minerals.

Lanthanum zirconate with a rare earth element (Cerium oxide (CeO2)) as a promising candidate for thermal barrier coating Rayed. Masters thesis, King Fahd University of Petroleum and Minerals.

Dynamic Modeling, Analysis, and Control of a Vertical Axis Wind Turbine. PhD thesis, King Fahd University of Petroleum and Minerals.

COOPERATIVE AND COORDINATED CONTROL OF MULTIVEHICLE SYSTEMS. PhD thesis, King Fahd University of Petroleum and Minerals.

HIGH-RESOLUTION MECHANICAL STRATIGRAPHY OF LATE JURASSIC CARBONATE MUDROCKS, SAUDI ARABIA. Masters thesis, King Fahd University of Petroleum and Minerals.

(2021) Multiple-Objective Optimization of District Cooling System (DCS). Masters thesis, King Fahd University of Petroleum and Minerals.

DESIGN FOR REPURPOSING: FRAMEWORK, TOOLKIT, AND LCA. Masters thesis, King Fahd University of Petroleum and Minerals.

Investigation of The Effect of Quenching and Partitioning Processing on API Graded Steels. Masters thesis, King Fahd University of Petroleum and Minerals.

HYDROPHOBIC AND ANTIMICROBIAL COATINGS FOR HVAC WATER COOLING TOWERS. Masters thesis, King Fahd University of Petroleum and Minerals.

SOLAR POWERED HYBRID ADSORPTION DESALINATIONCOOLING SYSTEMS. Masters thesis, King Fahd University of Petroleum and Minerals.

PERFORMANCE AND COST ANALYSES OF AN INTEGRATED SYSTEM OF M-CYCLE-BASED COOLING AND ABLUTION GREYWATER TREATMENT FOR MOSQUES IN HOT AND DRY CLIMATIC ZONES. Masters thesis, King Fahd University of Petroleum and Minerals.

AN INNOVATIVE AND PRACTICAL DEFINITION OF ENERGY EFFECTIVENESS FOR HUMIDIFICATION DEHUMIDIFICATION DESALINATION SYSTEMS. Masters thesis, King Fahd University of Petroleum and Minerals.

THE SIGNIFICANCE OF MODELING ELECTRODIALYSIS DESALINATION USING MULTI-COMPONENT SALINE WATER. Masters thesis, King Fahd University of Petroleum and Minerals.

Friction Stir Processing Effects on Fatigue Crack Propagation in Super Duplex Stainless Steel. Masters thesis, King Fahd University of Petroleum and Minerals.

LARGE DEFLECTION OF ANISOTROPIC THIN PLATES WITH DIFFERENT BOUNDARY CONDITION. PhD thesis, King Fahd University of Petroleum and Minerals.

Performance Analysis of Air Heated and Dual Heated Humidification-Dehumidification Cycles. Masters thesis, King Fahd University of Petroleum and Minerals.

Fatigue Analysis of Surface Pretreated Adhesively Bonded CFRP using FEM and X-Ray Tomography. Masters thesis, King Fahd University of Petroleum and Minerals.

THEORITICAL AND EXPERIMENTAL INVESTIGATIONS OF OIL-REFRIGERANT TWO-PHASE FLOW REFRIGERATION SYSTEM. PhD thesis, King Fahd University of Petroleum and Minerals.

INVESTIGATION OF ITM IN-SITU COMBUSTION FOR THERMAL ENHANCED OIL RECOVERY. PhD thesis, King Fahd University of Petroleum and Minerals.

FRACTURE ASSESSMENT OF NOTCHED 2099-T83 ALUMINUM-LITHIUM SPECIMENS UNDER TENSILE STATIC LOADING. Masters thesis, King Fahd University of Petroleum and Minerals.

DETECTION OF BLADE’S DEFECT USING BENDING VIBRATIONS OF A SHAFT IN A SHAFT-DISK-BLADE SYSTEM. Masters thesis, King Fahd University of Petroleum and Minerals.

MICROSTRUCTURE IMAGE-BASED MODELLING OF FAILURE IN THERMAL BARRIER COATINGS USING EXTENDED FINITE ELEMENT METHOD. Masters thesis, King Fahd University of Petroleum and Minerals.

Impact of friction stir processing on mechanical, microstructural, tribological and electrochemical properties of aluminum alloys. Masters thesis, King Fahd University of Petroleum and Minerals.

EFFECT OF THERMAL SPRAY COATING PROCESS PARAMETERS ON THE DEVELOPMENT OF RESIDUAL STRESSES IN CERAMIC COATINGS. Masters thesis, King Fahd University of Petroleum and Minerals.

Development and mechanical characterization of aluminum(Al) hybrid nanocomposite reinforced with alumina (Al2O3) and graphene oxide (GO). Masters thesis, King Fahd University of Petroleum and Minerals.

EXPERIMENTAL AND NUMERICAL INVESTIGATION INTO THE OXY-COMBUSTION CHARACTERISTICS OF PROPANE IN A SWIRL-STABILIZED, NON-PREMIXED COMBUSTOR. PhD thesis, King Fahd University of Petroleum and Minerals.

EFFECT OF HYDROGEN ENRICHMENT AND BURNER GEOMETRY ON OXY-METHANE COMBUSTION IN A MICROMIXER MODEL GAS-TURBINE COMBUSTOR. Masters thesis, King Fahd University of Petroleum and Minerals.

Holistic Approach for Assessing Sustainable Design of Consumer Products. Masters thesis, King Fahd University of Petroleum and Minerals.

DYNAMICS OF WATER DROPLET SPINNING AND ROLLING ON INCLINED SUPERHYDROPHOBIC WEDGED CHANNEL. Masters thesis, King Fahd University of Petroleum and Minerals.

Fault Tolerant Control of Wind Turbines. Masters thesis, King Fahd University of Petroleum and Minerals.

ANALYTICAL MODELING OF A MULTISTAGE BUBBLE COLUMN HUMIDIFIER. Masters thesis, King Fahd University of Petroleum and Minerals.

IN-LINE GENERATION OF OIL-IN-WATER AND WATER-INOIL EMULSIONS. Masters thesis, King Fahd University of Petroleum and Minerals.

INFLUENCE OF FRICTION STIR PROCESSING ON MECHANICAL PROPERTIES AND CORROSION RESISTANCE OF UNS S32750 SDSS. Masters thesis, King Fahd University of Petroleum and Minerals.

NOVEL ASSESSMENT OF WALL THINNING IN STAINLESS STEEL ELBOW USING ELECTRIC FIELD MAPPING (EFM) SYSTEM. Masters thesis, King Fahd University of Petroleum and Minerals.

Exergo-economic Optimization of Concentrated Photovoltaic Thermoelectric Hybrid Generator. Masters thesis, King Fahd University of Petroleum and Minerals.

STATIC STABILITY AND COMBUSTION FEATURES OF C3H8/O2/CO2, C3H8/O2/N2 AND CH4/H2/O2/CO2 TURBULENT PREMIXED FLAMES IN A MODEL GAS TURBINE COMBUSTOR. Masters thesis, King Fahd University of Petroleum and Minerals.

FREE VIBRATION ANALYSIS OF A SMART COMPOSITE UAV WING COVERED WITH PHOTOVOLTAIC CELLS. Masters thesis, King Fahd University of Petroleum and Minerals.

Experimental and numerical study of hybrid Photovoltaic/thermal solar system using nanofluid optical filtration and nanoPCM. PhD thesis, King Fahd University of Petroleum and Minerals.

INTEGRATED MECHANICAL VAPOR COMPRESSION DESALINATION SYSTEM AND AIR-CONDITIONING SYSTEM. Masters thesis, King Fahd University of Petroleum and Minerals.

WATER DROPLET BEHAVIOR ON INCLINED DUSTY HYDROPHOBIC SURFACE: DUST CHARACTERISTICS AND DROPLET DYNAMICS. PhD thesis, King Fahd University of Petroleum and Minerals.

INFLUENCE OF NANO PARTICLE SIZE, SHAPE AND VOLUME CONCENTRATION ON THE PERFORMANCE OF FLAT PLATE SOLAR COLLECTOR. Masters thesis, King Fahd University of Petroleum and Minerals.

FATIGUE OF ADHESIVE-BONDED COMPOSITE JOINTS WITH LASER-BASED SURFACE TREATMENT. Masters thesis, King Fahd University of Petroleum and Minerals.

HYDROGEN FLUORIDE MODIFIED DUST FOR SELF-CLEANING APPLICATIONS. Masters thesis, King Fahd University of Petroleum and Minerals.

Mr. ISMAILA G. Kehinde. Masters thesis, King Fahd University of Petroleum and Minerals.

Coordinating the Operation of Water Desalination and a Renewables-Rich Electric Power Grid. Masters thesis, King Fahd University of Petroleum and Minerals.

USE OF HYBRID NANOFLUID TO IMPROVE SOLAR STILL PERFORMANCE. Masters thesis, King Fahd University of Petroleum and Minerals.

Numerical Modeling for Performance Prediction of Standing Wave Thermoacoustic Systems. Masters thesis, King Fahd University of Petroleum and Minerals.

VIBROACOUSTIC CONTROL USING METAMATERIAL RESONATORS. Masters thesis, King Fahd University of Petroleum and Minerals.

Tribological Evaluation of Hybrid Nanocomposite Epoxy Coating System Based on Novel Fillers for Demanding Industrial Applications. Masters thesis, King Fahd University of Petroleum and Minerals.

Heat and Mass Transfer for a Shallow Bubble Column Dehumidifier. Masters thesis, King Fahd University of Petroleum and Minerals.

THERMOELECTRIC PROPERTIES OF XFeSb (X=Ta, Nb) HALF-HEUSLER COMPOUNDS FROM FIRST PRINCIPLE. Masters thesis, King Fahd University of Petroleum and Minerals.

Dynamic Analysis of periodic plates with localized resonators. Masters thesis, King Fahd University of Petroleum and Minerals.

Comparative study for Environmental Impacts of Laser Beam Welding, Friction Stir Welding and Gas Tungsten Arc Welding using Life Cycle Assessment. Masters thesis, King Fahd University of Petroleum and Minerals.

Experimental and Theoretical Investigation of HDH Desalination Systems by Thermodynamic Balancing. Masters thesis, King Fahd University of Petroleum and Minerals.

Probabilistic Characterization of Mechanical Properties and Reliability Assessment of Metal Castings. Masters thesis, King Fahd University of Petroleum and Minerals.

NUMERICAL AND EXPERIMENTAL INVESTIGATIONS OF AN OXY-COMBUSTION CARBON FREE POWER GENERATION SYSTEM. PhD thesis, King Fahd University of Petroleum and Minerals.

Heat Pump Operated Humidification-Dehumidification Desalination System. PhD thesis, King Fahd University of Petroleum and Minerals.

Resistance of Chromium Manganese Stainless Steel to Pitting Corrosion Exposed To Harsh Environment. Masters thesis, King Fahd University of Petroleum and Minerals.

MULTI-OBJECTIVE OPTIMIZATION FOR MED-TVC SYSTEM. Masters thesis, King Fahd University of Petroleum and Minerals.

Optimization Of FCAW/GMAW By Using Response Surface Methodology and Cube Composite Design Along with Taguchi Quality Loss Function and Desirability Function. Masters thesis, King Fahd University of Petroleum and Minerals.

Development of biodegradable Mg alloys. Masters thesis, King Fahd University of Petroleum and Minerals.

EXPERIMENTAL INVESTIGATIONS OF A MOBILE-WATER HEATED HDH DESALINATION SYSTEM USING SOLAR ENERGY. Masters thesis, King Fahd University of Petroleum and Minerals.

Heat Flux and Friction Losses Effects on Natural Circulation in Package Boilers. PhD thesis, King Fahd University of Petroleum and Minerals.

SOLAR ASSISTED COMBINED POWER AND COOLING SYSTEM. Masters thesis, King Fahd University of Petroleum and Minerals.

OPTIMIZATION OF SUBMERGED ARC WELDING (SAW) AND GAS TUNGSTEN ARC WELDING (GTAW) PROCESSES AND ACHIEVING ENHANCE EXCELLENCE OF WELDS QUALITY. Masters thesis, King Fahd University of Petroleum and Minerals.

Direct Numerical Simulation of 3D Sparse Multiscale Grid Generated Turbulence and Kinematic Simulation of Inertial Particle Pair Diffusion. PhD thesis, King Fahd University of Petroleum and Minerals.

SOLAR-DRIVEN HYBRID EJECTOR COOLING AND HUMIDIFICATION DEHUMIDIFICATION WATER DESALINATION SYSTEM. Masters thesis, King Fahd University of Petroleum and Minerals.

MODELING RESIDUAL STRESS EVOLUTION IN THERMAL SPRAY COATINGS USING HYBRID COMPUTATIONAL APPROACH. PhD thesis, King Fahd University of Petroleum and Minerals.

Nonlinear Analysis of Acoustic Dual Helmholtz Resonators. Masters thesis, King Fahd University of Petroleum and Minerals.

Performance and Cost Analyses of Hybrid Diesel-PV Powered Small Brackish Water RO System in Saudi Arabia. Masters thesis, King Fahd University of Petroleum and Minerals.

OXY-FUEL COMBUSTION ANALYSES OF POROUS AND ITM REACTORS FOR BOILER AND OTHER APPLICATIONS. PhD thesis, King Fahd University of Petroleum and Minerals.

MODELING AND NUMERICAL INVESTIGATION OF A FALLING FILM LIQUID DESICCANT DEHUMIDIFIER WITH NANOPARTICLES. Masters thesis, King Fahd University of Petroleum and Minerals.

CFD MODELLING FOR LIQUID FILM REVERSAL OF TWO-PHASE FLOW IN VERTICAL PIPES. Masters thesis, King Fahd University of Petroleum and Minerals.

Electrochemical Study of Rehabilitation Coatings in Soil Simulating Conditions. Masters thesis, King Fahd University of Petroleum and Minerals.

TWO-LEVEL GALERKIN MIXED FINITE ELEMENT METHOD FOR GENERALIZED DARCY-FORCHHEIMER PROBLEMS. PhD thesis, King Fahd University of Petroleum and Minerals.

Development of Graphene Reinforced UHMWPE Nanocomposite Coatings for Mechanical Bearing Applications. PhD thesis, King Fahd University of Petroleum and Minerals.

RENEWABLE ENERGY-POWERED HYBRID NF/FO/RO MEMBRANE SYSTEM FOR BRACKISH WATER DESALINATION. Masters thesis, King Fahd University of Petroleum and Minerals.

Development and Evaluation of Cathodic Arc Physical Vapor Deposition (PVD) Coated Friction Stir Welding (FSW) Tools. PhD thesis, King Fahd University of Petroleum and Minerals.

ANALYTICAL INVESTIGATION OF FLOW DISTRIBUTION IN HEAT EXCHANGER MANIFOLDS. PhD thesis, King Fahd University of Petroleum and Minerals.

Development of Alkaline Metal Stabilized Nitrogen Rich Alpha Sialons using Nano Precursors and Spark Plasma Sintering. PhD thesis, King Fahd University of Petroleum and Minerals.

INVESTIGATING THE ELECTROCHEMICAL PROPERTIES OF A NEWLY DEVELOPED FE-CR ALLOY (FE-18CR-XSI) WITH SILICON ADDITION. Masters thesis, King Fahd University of Petroleum and Minerals.

DEVELOPMENT OF A SIMULATION-BASED METHODOLOGY FOR MOLD DESIGN OPTIMIZATION AND RELIABILITY ASSESSMENT OF CAST PARTS. PhD thesis, King Fahd University of Petroleum and Minerals.

Optimization of torque and power produced from a small scale vertical axis wind turbine. Masters thesis, King Fahd University of Petroleum and Minerals.

Design and Development of Ceramic-based Composites for Cutting Tool Inserts. Masters thesis, King Fahd University of Petroleum and Minerals.

MULTI-MODEL BASED FORMATION CONTROL OF A FLEET OF UAVs. Masters thesis, King Fahd University of Petroleum and Minerals.

DESIGN AND ANALYSIS OF A FRICTION STIR WELDING MACHINE FOR TUBE TO TUBE-SHEET WELDING APPLICATION. Masters thesis, King Fahd University of Petroleum and Minerals.

THEORETICAL AND EXPERIMENTAL INVESTIGATION OF AN INNOVATIVE SOLAR AIR HEATED HDH SYSTEM. Masters thesis, King Fahd University of Petroleum and Minerals.

DATE PALM LEAF EXTRACT (DPLE) AS A GREEN CORROSION INHIBITOR FOR COPPER IN RAW WATER. Masters thesis, King Fahd University of Petroleum and Minerals.

ABSORBER MATERIALS FOR SOLAR THERMAL POWER PLANT. Masters thesis, King Fahd University of Petroleum and Minerals.

EXPERIMENTAL INVESTGATION ON PREMIXED OXY-COMBUSTION AT CONSTANT REYNOLDS NUMBERS. Masters thesis, King Fahd University of Petroleum and Minerals.

DYNAMICS AND CONTROL OF VIBRATING WEBS IN A ROLL-TO-ROLL SYSTEM. PhD thesis, King Fahd University of Petroleum and Minerals.

Robust Behavioral-Control of Multi-Agent Systems. PhD thesis, King Fahd University of Petroleum and Minerals.

Tribological Characterization of a Novel UHMWPE Hybrid Nanocomposite Coating for Biomedical Applications. Masters thesis, King Fahd University of Petroleum and Minerals.

DEVELOPMENT AND CHARACTERIZATION OF ELECTROSPUN POLYACRYLONITRILE-BASED NANOCOMPOSITE MEMBRANES FOR OIL-WATER SEPARATION. Masters thesis, King Fahd University of Petroleum and Minerals.

TWO-PHASE ANNULAR FLOW IN VERTICAL PIPES. Masters thesis, King Fahd University of Petroleum and Minerals.

Investigation of Embeddable Sensors and Study of their Placement for Smart Structures. PhD thesis, King Fahd University of Petroleum and Minerals.

ENHANCING THE THERMAL INSULATION OF CONCRETE AND MASONRY HOLLOW CONCRETE BRICKS EXPERIMENTALLY AND ANALYTICALLY. Masters thesis, King Fahd University of Petroleum and Minerals.

DEVELOPMENT AND INVESTIGATIONS OF ELECTROCHEMICAL PROPERTIES OF LEAN DUPLEX STAINLESS STEEL ALLOYS. Masters thesis, King Fahd University of Petroleum and Minerals.

DEVELOPMENT AND CHARACTERIZATION OF ULTRA HIGH MOLECULAR WEIGHT POLYETHYLENE (UHMWPE) BASED HYBRID NANOCOMPOSITE COATING FOR BEARING APPLICATIONS UNDER DRY AND WATER LUBRICATION. Masters thesis, King Fahd University of Petroleum and Minerals.

DEVELOPMENT OF MEMBRANE DISTILLATION SYSTEM POWERED BY CAR EXHAUST FOR WATER DESALINATION. Masters thesis, King Fahd University of Petroleum and Minerals.

INVESTIGATION OF TRIBOLOGICAL PROPERTIES OF MICRO/NANO SIZED WC-CO HARDMETALS PREPARED BY SPARK PLASMA SINTERING PROCESS AT ELEVATED TEMPERATURES. Masters thesis, King Fahd University of Petroleum and Minerals.

Investigation of Fiber Optic Embedding Processes within Different Types of Material. Masters thesis, King Fahd University of Petroleum and Minerals.

Development of Graphene Oxide Based Membrane as a Pretreatment Step in Thermal Seawater Desalination. Masters thesis, King Fahd University of Petroleum and Minerals.

THE EFFECTS OF COMPOSITION AND HEAT TREATMENT ON THE PASSIVATION OF STEEL REBAR IN CONCRETE SIMULATED ENVIRONMENT. Masters thesis, King Fahd University of Petroleum and Minerals.

PERFORMANCE ANALYSIS OF A NEW AUGMENTED SOLAR CHIMNEY POWER PLANT DESIGN. Masters thesis, King Fahd University of Petroleum and Minerals.

EFFECT OF TEMPERATURE ON THE STABILITY AND PRESSURE DROP OF WATER IN OIL STABLE EMULSION FLOW IN A HORIZONTAL PIPE. Masters thesis, King Fahd University of Petroleum and Minerals.

DEVELOPMENT OF ZIF-8 BASED MIXED MATRIX MEMBRANES FOR OXYGEN ENRICHED AIR APPLICATIONS. Masters thesis, King Fahd University of Petroleum and Minerals.

DEVELOPMENT AND CHARACTERIZATION OF HYBRID GLASS FIBER REINFORCED UNSATURATED POLYESTER/CLAY NANOCOMPOSITE. Masters thesis, King Fahd University of Petroleum and Minerals.

Theoretical and Experimental Studies of Modified Humidification Dehumidification Cycles. Masters thesis, King Fahd University of Petroleum and Minerals.

DAMAGE CHARACTERIZATION AND REHABILITATION OF FIBER-REINFORCED-POLYMER (FRP) COMPOSITE PIPES UNDER LOW VELOCITY IMPACT. PhD thesis, King Fahd University of Petroleum and Minerals.

Design and economic analysis of nanofluid based photovoltaic thermal (PVT) system with thermal storage. Masters thesis, King Fahd University of Petroleum and Minerals.

Physical Adsorption of Carbon Dioxide Capture by Novel Materials. PhD thesis, King Fahd University of Petroleum and Minerals.

Numerical modeling of the geomechanical behavior of a carbonate petroleum reservoir undergoing CO2 injection. PhD thesis, King Fahd University of Petroleum and Minerals.

SOLAR POWERED MULTISTAGE DIRECT CONTACT MEMBRANE DISTILLATION SYSTEM. Masters thesis, King Fahd University of Petroleum and Minerals.

DEVELOPING FRICTION STIR DIFFUSION CLADDING (FSDC) PROCESS. Masters thesis, King Fahd University of Petroleum and Minerals.

OXY-COMBUSTION OF FOSSIL FUEL IN A SWIRL STABILIZED NON-PREMIXED COMBUSTOR. Masters thesis, King Fahd University of Petroleum and Minerals.

Thermodynamic Analysis of a Combined LiBr-H2O Absorption System with a Single Effect Evaporation Cycle. Masters thesis, King Fahd University of Petroleum and Minerals.

Structural Health Monitoring of Composite Materials using Carbon Fiber Sensors. Masters thesis, King Fahd University of Petroleum and Minerals.

Dynamic Analysis of Fiberglass-Reinforced Plastic Pipes with Thickness Discontinuity using Wavelet-based Finite Element. PhD thesis, King Fahd University of Petroleum and Minerals.

Exergo-environmental analysis of a combustion gas turbine system subjected to inlet air cooling and evaporative after cooling of the compressor discharge. Masters thesis, King Fahd University of Petroleum and Minerals.

Development and characterization of alumina-CNTs nanocomposite membranes for water filtration application. Masters thesis, King Fahd University of Petroleum and Minerals.

GRAPHENE OXIDE BASED MEMBRANE FOR WATER PURIFICATION. Masters thesis, King Fahd University of Petroleum and Minerals.

NONLINEAR STRUCTURAL MECHANICS OF ELECTRICALLY ACTUATED CARBON NANOTUBE BASED NEMS DEVICES USING A HIGHER-ORDER STRAIN GRADIENT THEORY. Masters thesis, King Fahd University of Petroleum and Minerals.

Thermodynamic balancing of the regeneration process in a novel liquid desiccant cooling system by extraction technology. Masters thesis, King Fahd University of Petroleum and Minerals.

The Design and Simulation of a Chemical Looping Combustion System. Masters thesis, King Fahd University of Petroleum and Minerals.

Effect of Microstructure and Densification of FeCrMo based alloy on the corrosion performance in chloride environments. Masters thesis, King Fahd University of Petroleum and Minerals.

Dynamic Response of Initially Deformed and Imperfect Bi-stable Microbeams under the Combined Effect of Mechanical Shock Loads and Electrostatic Forces. Masters thesis, King Fahd University of Petroleum and Minerals.

NUMERICAL AND EXPERIMENTAL INVESTIGATIONS OF THE FREEZING OF CNT-WATER NANOFLUIDS IN A RECTANGULAR CAVITY. Masters thesis, King Fahd University of Petroleum and Minerals.

Exergoeconomic Analysis of Single As Well As Multi Effect Mechanical Vapor Compression Desalination Systems. Masters thesis, King Fahd University of Petroleum and Minerals.

STUDY THE EFFECT OF LIQUID IMPINGEMENT CORROSION/EROSION WITH AND WITHOUT SOLID PARTICLES ON TWO PIPELINE GRADES API X65 & MILD STEEL AISI 1030. Masters thesis, King Fahd University of Petroleum and Minerals.

COMPUTATIONAL MODEL FOR MULTIAXIAL FATIGUE NOTCH ANALYSIS. Masters thesis, King Fahd University of Petroleum and Minerals.

DEVELOPMENT OF TWO-PHASE REINFORCED ALUMINA NANOCOMPOSITE FOR CUTTING TOOLS APPLICATIONS. PhD thesis, King Fahd University of Petroleum and Minerals.

Microstructure and Tribology of Fe-Cr-Mo–Based alloy fabricated using Spark Plasma Sintering. Masters thesis, King Fahd University of Petroleum and Minerals.

Development of Mechanically Robust Water-Repellent Surfaces. Masters thesis, King Fahd University of Petroleum and Minerals.

Transient thermodynamic analysis of generator in a solar absorption system designed for hot and humid climates. Masters thesis, King Fahd University of Petroleum and Minerals.

DEVELOPMENT OF TRANSPARENT SUPERHYDROPHOBIC AND SELF-CLEANING SURFACES. Masters thesis, King Fahd University of Petroleum and Minerals.

Effects of Oscillatory Motion On The Wave Propagation in Beams. Masters thesis, King Fahd University of Petroleum and Minerals.

Optimum Selection of Renewable Energy Powered Desalination Systems. Masters thesis, King Fahd University of Petroleum and Minerals.

MODIFIED MULTI EFFECT DESALINATION SYSTEMS WITH MECHANICAL VAPOR COMPRESSION. Masters thesis, King Fahd University of Petroleum and Minerals.

AIR AND WATER GAP MULTISTAGE MEMBRANE DISTILLATION SYSTEM FOR WATER DESALINATION. Masters thesis, King Fahd University of Petroleum and Minerals.

Thermally Rearranged Polymeric Membrane for Natural Gas Separation. Masters thesis, King Fahd University of Petroleum and Minerals.

HYBRID POLYMERIC/CERAMIC MEMBRANE FOR OXY-FUEL COMBUSTION APPLICATIONS. Masters thesis, King Fahd University of Petroleum and Minerals.

Computational Aspects of a Multiscale Modeling Approach for Heterogeneous Materials under Multiphysics Loadings. PhD thesis, King Fahd University of Petroleum and Minerals.

Integrated Solar Absorption Cooling and Membrane Distillation Systems - A Theoretical Study. Masters thesis, King Fahd University of Petroleum and Minerals.

COMPUTATIONAL FLUID DYNAMIC AND HEAT TRANSFER MODELING OF STIRLING ENGINE. Masters thesis, King Fahd University of Petroleum and Minerals.

EFFECT OF INCLINATION, WATER CUT, BETA RATIO AND VISCOSITY ON VENTURI PRESSURE DROP MEASUREMENTS FOR OIL-WATER FLOW EXPERIMENTS. Masters thesis, King Fahd University of Petroleum and Minerals.

Processing and thermal behavior of alumina hybrid nanocomposites. Masters thesis, King Fahd University of Petroleum and Minerals.

DEVELOPMENT OF TUNGSTEN-RHENIUM BASE TOOL FOR FRICTION STIR WELDING OF STEEL. PhD thesis, King Fahd University of Petroleum and Minerals.

DRAG REDUCTION BY ADDITIVES IN MULTIPHASE FLOW IN PIPES. PhD thesis, King Fahd University of Petroleum and Minerals.

Online Control and Optimization of Directional Drilling. Masters thesis, King Fahd University of Petroleum and Minerals.

GRAPHENE-INCORPORATED METAL ORGANIC FRAMEWORKS AS POTENTIAL ADSORBENTS FOR SOLAR ADSORPTION REFRIGERATION SYSTEMS. PhD thesis, King Fahd University of Petroleum and Minerals.

DEVELOPMENT OF THERMO-CHEMICAL MODEL AND EXERGETIC ASSESSMENT OF A BIOMASS DERIVED SYNGAS FUELED COMBINED CYCLE FOR COGENERATION OF POWER AND COOLING. Masters thesis, King Fahd University of Petroleum and Minerals.

Modeling of Spark Plasma Sintering Process. Masters thesis, King Fahd University of Petroleum and Minerals.

Motion of a Floating Cable-driven Platform. PhD thesis, King Fahd University of Petroleum and Minerals.

Simulation of Variable Camber Continuous Trailing Edge Flap on Outboard Airfoil of ATRA wing. Masters thesis, King Fahd University of Petroleum and Minerals.

SENSING AND CONTROL OF ROTATING BLADE VIBRATIONS DUE TO THERMAL LOADS USING PIEZOELECTRIC MATERIALS. Masters thesis, King Fahd University of Petroleum and Minerals.

CHEMO-MECHANICS OF DUST AND MUD ON PROTECTIVE SURFACES. Masters thesis, King Fahd University of Petroleum and Minerals.

EFFECT OF COATING MATERIALS ON THE OXYGEN PERMEABILITY AND STABILITY OF THE ASYMMETRIC ION TRANSPORT MEMBRANE Ba0.5Sr0.5Co0.8Fe0.2O3−δ (BSCF). PhD thesis, King Fahd University of Petroleum and Minerals.

THERMAL AND EXERGO-ECONOMIC ANALYSIS OF A SYSTEM FOR HYDROGEN PRODUCTION INTEGRATED WITH SOLAR PHOTOVOLTAIC PANELS AND CO-GENERATION CYCLE. PhD thesis, King Fahd University of Petroleum and Minerals.

A FRAMEWORK FOR THE PROCESS OF EFFECTIVE COORDINATION OF BUILDING SERVICES DURING THE DESIGN DEVELOPMENT AND REVIEW STAGES. Masters thesis, King Fahd University of Petroleum and Minerals.

Influence of Processing on Microstructure and Properties of Al-Al2O3 Nanocomposites. Masters thesis, King Fahd University of Petroleum and Minerals.

SOLAR ASSISTED MULTI-EFFECT REFRIGERATION SYSTEM. Masters thesis, King Fahd University of Petroleum and Minerals.

Development and characterization of Ultrahigh Molecular Weight Polyethylene(UHMWPE)Nanocomposites for bearing application under water lubriction. Masters thesis, King Fahd University of Petroleum and Minerals.

A NOVEL MICROCONTROLLER-BASED PRESSURIZED FLUSHING SYSTEM FOR WATER CONSERVATION IN SMART HOMES AND PUBLIC SPACES. Masters thesis, King Fahd University of Petroleum and Minerals.

SIMULATION AND ASSESSMENT OF A WIRELESS BINARY WATER PUMPING SYSTEM FOR CONSERVING WATER IN RESIDENTIAL BUILDINGS AND PUBLIC PLACES. Masters thesis, King Fahd University of Petroleum and Minerals.

ELECTRICAL AND THERMAL BEHAVIOR OF ALUMINA-BASED NANOCOMPOSITES. Masters thesis, King Fahd University of Petroleum and Minerals.

ENVIRONMENTAL IMPACT ANALYSIS OF OIL AND GAS PIPE REPAIR TECHNIQUES USING LIFE CYCLE ASSESSMENT (LCA). Masters thesis, King Fahd University of Petroleum and Minerals.

Investigating the role of Silicon on the electrochemical properties of powder metallurgy stainless steels. Masters thesis, King Fahd University of Petroleum and Minerals.

INVESTIGATION OF SYNGAS OXY-COMBUSTION IN A GAS TURBINE MODEL COMBUSTOR. Masters thesis, King Fahd University of Petroleum and Minerals.

DYNAMICS OF A PET WEB IN A ROLL-TO-ROLL SYSTEM. Masters thesis, King Fahd University of Petroleum and Minerals.

MECHANICAL PROPERTIES OF THERMAL SPRAY COPPER ALLOYS COATINGS. Masters thesis, King Fahd University of Petroleum and Minerals.

Modification of Polyether ether ketone for higher wear durability in tribological applications. Masters thesis, King Fahd University of Petroleum and Minerals.

Multiphase Flow Estimation Using Image Processing. PhD thesis, King Fahd University of Petroleum and Minerals.

DEVELOPING A CERAMIC COMPOSITE FOR APPLICATIONS IN POWER ELECTRONIC SUBSTRATES. Masters thesis, King Fahd University of Petroleum and Minerals.

GRAPHENE TRANSFER ONTO PP, PES AND PVDF POLYMERIC SUBSTRATES: DEVELOPMENT OF WATER PURIFICATION MEMBRANES. PhD thesis, King Fahd University of Petroleum and Minerals.

CONTROL AND OPTIMIZATION OF NOx EMISSION AND EFFICIENCY IN BOILERS. Masters thesis, King Fahd University of Petroleum and Minerals.

Influence of Drag Reducing Polymer on Flow Characteristics around Orifices. Masters thesis, King Fahd University of Petroleum and Minerals.

INVESTIGATION OF FLOW AND EROSION CHARACTERISTICS THROUGH A SET OF RESTRICTING ORIFICES. Masters thesis, King Fahd University of Petroleum and Minerals.

Development of Magnesium Based Hybrid Nanocomposite. Masters thesis, King Fahd University of Petroleum and Minerals.

Self-cleaning of Glass and Polycarbonate Surfaces Using Texturing and Dynamic Rotation. Masters thesis, King Fahd University of Petroleum and Minerals.

DEVELOPMENT OF α/β-SIALON NANO CERAMIC FOR WEAR RESISTANCE APPLICATIONS. Masters thesis, King Fahd University of Petroleum and Minerals.

Water Desalination through thermal systems MED Technology. Masters thesis, King Fahd University of Petroleum and Minerals.

Effect of Silicon Carbide (SiC) and Tungsten Carbide (WC) Reinforcements on the Properties of (α)-SIALON Ceramic-Based Nano Composites. Masters thesis, King Fahd University of Petroleum and Minerals.

Heat Transfer Enhancement in a Solar Latent Heat Storage System. Masters thesis, King Fahd University of Petroleum and Minerals.

VIBRATION OF AN AXIALLY MOVING CURVED WEB. Masters thesis, King Fahd University of Petroleum and Minerals.

OPTIMIZATION OF QUALITY AND PRODUCTIVITY OF ZINC ALLOY CASTINGS BY USING ADVANCED SIMULATION TECHNIQUES. Masters thesis, King Fahd University of Petroleum and Minerals.

SYNTHESIS OF MULTIWALL CARBON NANOTUBES FROM P-XYLENE AND FERROCENE BY USING VERTICAL CHEMICAL VAPOR DEPOSITION REACTOR FITTED WITH AN ULTRASONIC ATOMIZING HEAD. Masters thesis, King Fahd University of Petroleum and Minerals.

EXPERIMENTAL INVESTIGATION OF SOLAR DRIVEN MULTI-STAGE STEPPED BUBBLER HUMIDIFIER. Masters thesis, King Fahd University of Petroleum and Minerals.

FOULING MITIGATION OF REVERSE OSMOSIS MEMBRANES USING LAYER BY LAYER DEPOSITION OF POLYELECTROLYTES. Masters thesis, King Fahd University of Petroleum and Minerals.

Development of New Zwitterionic Coatings for Ultralow Fouling in Reverse Osmosis Membranes. PhD thesis, King Fahd University of Petroleum and Minerals.

DESIGN AND FABRICATION OF DYE-SENSITIZED SOLAR CELL USING SELF-SYNTHESIZED QUATERNARY (TIO2/ZNO/CDS/GRAPHENE) NANOCOMPOSITE BY PULSED LASER ABLATION TECHNIQUE. Masters thesis, King Fahd University of Petroleum and Minerals.

Corrosion Resistance of Quenched Steel Rebar. Masters thesis, King Fahd University of Petroleum and Minerals.

OXYCOMBUSTION OF SYNTHETIC GAS IN AN OXYGEN TRANSPORT REACTOR (OTR). Masters thesis, King Fahd University of Petroleum and Minerals.

THERMAL AND ECONOMICAL ANALYSIS OF HDH SYSTEMS DRIVEN BY SOLAR THERMAL ENERGY WITH A STORAGE OPTION. Masters thesis, King Fahd University of Petroleum and Minerals.

Experimental Investigation and Thermodynamic Analysis of a Cross-Flow Humidifier. Masters thesis, King Fahd University of Petroleum and Minerals.

Investigation of a solar assisted thermally activated air conditioning system. Masters thesis, King Fahd University of Petroleum and Minerals.

Nonlinear Structural Behavior of Electrically Actuated MEMS Actuator. Masters thesis, King Fahd University of Petroleum and Minerals.

ENERGY UTILIZATION FROM DISPOSED BRINE OF DESALINATION PLANTS USING PRESSURE RETARDED OSMOSIS. Masters thesis, King Fahd University of Petroleum and Minerals.

Analysis of Solar Tower Integrated with sCO2 Brayton Cycle and MEE-TVC Desalination. Masters thesis, King Fahd University of Petroleum and Minerals.

HVAC operation and air distribution strategies for thermal comfort and energy conservation in mosques in hot climate. Masters thesis, King Fahd University of Petroleum and Minerals.

EXPERIMENTAL AND NUMERICAL STUDY OF SYNGAS COMBUSTION. PhD thesis, King Fahd University of Petroleum and Minerals.

Creep and erosion resistance of nitride based nanostructured coatings deposited by cathodic arc. Masters thesis, King Fahd University of Petroleum and Minerals.

SYNTHESIS AND CHARACTERIZATION OF GRAPHENE ON COPPER SUBSTRATE: EFFECTS OF HYDROGEN AND COPPER SURFACE MORPHOLOGY ON GRAPHENE CHARACTERISTICS. PhD thesis, King Fahd University of Petroleum and Minerals.

Influence of Surfactants on the Stability of Nanofluids of Raw and Impregnated Carbon Nanotubes for Application of Heat Transfer. Masters thesis, King Fahd University of Petroleum and Minerals.

FRICTION STIR SPOT WELDING PROCESS: EXPERIMENTAL INVESTIGATION AND NUMERICAL MODELING. Masters thesis, King Fahd University of Petroleum and Minerals.

Modeling and Performance Analysis of Low Concentration Photovoltaic (LCPV) System. Masters thesis, King Fahd University of Petroleum and Minerals.

THE EFFECT OF PRESSURE ON HUMIDIFICATION AND DEHUMIDIFICATION PROCESSES FOR HDH DESALINATION SYSTEMS. Masters thesis, King Fahd University of Petroleum and Minerals.

EXPERIMENTAL AND THEORETICAL INVESTIGATION ON WATER DESALINATION USING MEMBRANE DISTILLATION. Masters thesis, King Fahd University of Petroleum and Minerals.

DRAG REDUCTION BY POLYMERS IN TWO-PHASE FLOW IN A SMALL PIPE DIAMETER. Masters thesis, King Fahd University of Petroleum and Minerals.

Modeling and Implementation of Robotic Arm. Masters thesis, King Fahd University of Petroleum and Minerals.

Analytical and Numerical Analysis of Cylindrical and Spherical Pressure Vessels with Small-Diameter Nozzles. PhD thesis, King Fahd University of Petroleum and Minerals.

THERMO-MECHANICAL BEHAVIOR OF METAL FOAMS IN THERMAL APPLICATIONS: A COMPUTATIONAL AND EXPERIMENTAL APPROACH. Masters thesis, King Fahd University of Petroleum and Minerals.

PIEZOELECTRIC MATERIALS AS ENERGY GENERATION DEVICES. Masters thesis, King Fahd University of Petroleum and Minerals.

DEVELOPMENT OF NANOSTRUCTURED Ti AND Nb-BASED ALLOYS FOR BIOMEDICAL APPLICATIONS. PhD thesis, King Fahd University of Petroleum and Minerals.

MODELLING OF CARBON DIOXIDE (CO2) CAPTURE USING METAL-ORGANIC FRAMEWORKS (MOFs). Masters thesis, King Fahd University of Petroleum and Minerals.

Heat Transport Characteristics In Thin Films. PhD thesis, King Fahd University of Petroleum and Minerals.

Numerical And Experimental Investigation Of Uniform Cooling Techniques For Photovoltaic Panel. Masters thesis, King Fahd University of Petroleum and Minerals.

CFD MODELING OF HUMIDIFICATION DEHUMIDIFICATION DESALINATION SYSTEM. Masters thesis, King Fahd University of Petroleum and Minerals.

CHARACTERIZATION OF TWO PHASE FLOW IN A HORIZONTAL AND INCLINED 4-INCH PIPE. Masters thesis, King Fahd University of Petroleum and Minerals.

Optimization and Thermal Performance Analysis of Supercritical Carbon Dioxide Brayton Cycles Driven by Solar Thermal Power Tower Systems. Masters thesis, King Fahd University of Petroleum and Minerals.

COMPUTATIONAL FLUID DYNAMICS STUDY OF HYDROGEN GENERATION BY LOW TEMPERATURE STEAM METHANE REFORMING IN A MEMBRANE REACTOR. Masters thesis, King Fahd University of Petroleum and Minerals.

MODELING OF MOFS BASED CO2 ADSORPTION SYSTEMS. Masters thesis, King Fahd University of Petroleum and Minerals.

Multi Criteria Design Optimization and Control of Community Scale Photovoltaic based Reverse Osmosis Water Desalination System. PhD thesis, King Fahd University of Petroleum and Minerals.

SYNTHESIS AND CHARACTERIZATION OF NANO-SiC REINFORCED AL ALLOYS. Masters thesis, King Fahd University of Petroleum and Minerals.

FRICTION STIR WELDING (FSW) OF DISSIMILAR METALS AND ALLOYS. Masters thesis, King Fahd University of Petroleum and Minerals.

NUMERICAL MODELING OF OXY-COMBUSTION OF LIQUID FUEL IN THE FURNACE OF A WATER-TUBE BOILER. Masters thesis, King Fahd University of Petroleum and Minerals.

Desalination Using Air Gap Membrane Distillation. Masters thesis, King Fahd University of Petroleum and Minerals.

Optimal Active Vibration Suppression of Smart Composite Wind Turbine Blades. Masters thesis, King Fahd University of Petroleum and Minerals.

Premixed Syngas Combustion: Modeling and Application to a Swirl-Stabilized Combustor. Masters thesis, King Fahd University of Petroleum and Minerals.

DEVELOPMENT AND CHARACTERIZATION OF HYBRID GLASS FIBER AND EPOXY CLAY NANOCOMPOSITES. Masters thesis, King Fahd University of Petroleum and Minerals.

Experimental & Numerical Investigations of Oxy-fuel Combustion Using Porous Plate Reactor. Masters thesis, King Fahd University of Petroleum and Minerals.

THE IMPACT OF COST AND FOULING ON HEAT EXCHANGER INVENTORY IN POWER AND REFRIGERATION SYSTEMS. PhD thesis, King Fahd University of Petroleum and Minerals.

ENHANCEMENT OF MECHANICAL AND PHYSICAL PROPERTIES OF SILICATE BASED EPOXY NANOCOMPOSITES. Masters thesis, King Fahd University of Petroleum and Minerals.

DEVELOPMENT OF ENERGY EFFICIENT SOLAR POWERED AQUA-AMMONIA ABSORPTION REFRIGERATION AND AIR-CONDITIONING SYSTEM. PhD thesis, King Fahd University of Petroleum and Minerals.

A Numerical Modeling Approach for Transformation-Induced Failures. Masters thesis, King Fahd University of Petroleum and Minerals.

STRUCTURAL STABILITY OF MEMS ARCHES ACTUATED BY ELECTROSTATIC FRINGING FIELDS. Masters thesis, King Fahd University of Petroleum and Minerals.

OPTIMIZATION AND FAILURE ANALYSIS OF A CABLE BASED PARALLEL MANIPULATOR FOR SUBSEA APPLICATIONS. Masters thesis, King Fahd University of Petroleum and Minerals.

H2S AND CO2 CORROSION OF SA-543 AND X65 STEELS IN OIL/WATER EMULSION. Masters thesis, King Fahd University of Petroleum and Minerals.

SOFT ANALYZER FOR NOX EMISSIONS APPLICATION ON CGTG IN COGENERATION PLANT. Masters thesis, King Fahd University of Petroleum and Minerals.

Multi-stage Bubble Column Humidifier for Thermal Driven Mechanical Compression Humidification Dehumidification Desalination System. Masters thesis, King Fahd University of Petroleum and Minerals.

DESIGN AND FABRICATION OF DIFFERENT TEXTURED SURFACES WITH IMPROVED HYDROPHOBICITY FOR PHOTOVOLTAIC CELLS’ APPLICATIONS. Masters thesis, King Fahd University of Petroleum and Minerals.

STUDY ON THE SOLID PARTICLE EROSION AND EROSION-CORROSION BEHAVIOR OF ALUMINUM AND STEELS. Masters thesis, King Fahd University of Petroleum and Minerals.

WATER HAMMER MODELING AND ANALYSIS FOR KHOBAR-DAMMAM WATER TRANSMISSION RING LINE. Masters thesis, King Fahd University of Petroleum and Minerals.

MULTIPHYSICS MODELING OF THE SPARK PLASMA SINTERING PROCESS. Masters thesis, King Fahd University of Petroleum and Minerals.

INVESTIGATING DISLOCATION STRUCTURE EVOLUTION DURING NANOINDENTATION. Masters thesis, King Fahd University of Petroleum and Minerals.

DEVELOPMENT OF A NOVEL HYBRID STORAGE SYSTEM FOR AQUA-AMMONIA SOLAR ABSORPTION REFRIGERATION CYCLE. Masters thesis, King Fahd University of Petroleum and Minerals.

NUMERICAL AND EXPERIMENTAL ANALYSIS ON THERMAL STRESS MEASUREMENT OF SPIRAL WELDED PIPES. Masters thesis, King Fahd University of Petroleum and Minerals.

COMPUTATIONAL FLUID DYNAMICS (CFD) MODELING OF SOLAR STEAM METHANE REFORMER AND DESIGN OF AN INTEGRATED NOVEL SOLAR COLLECTOR. Masters thesis, King Fahd University of Petroleum and Minerals.

Thixoforging of Aluminum Nano-composites Synthesized by Ultrasonic Stir Casting. Masters thesis, King Fahd University of Petroleum and Minerals.

Fundamental Studies of Dust Fouling and Mitigation Approaches for PV Modules. Masters thesis, King Fahd University of Petroleum and Minerals.

EXPERIMENTAL INVESTIGATION OF TUBE RUPTURE UNDER BOILER DYNAMIC OPERATING CONDITIONS. Masters thesis, King Fahd University of Petroleum and Minerals.

Evaluation of the Effectiveness of Alkaline-earth metal oxides in Inhibiting Vanadium-induced Hot Corrosion of Yttria-stabilized Zirconia Thermal Barrier Coatings (TBCs). Masters thesis, King Fahd University of Petroleum and Minerals.

Performance Improvement of a Vapor Compression Air Conditioning System by Condensate and Fresh Water Source. Masters thesis, King Fahd University of Petroleum and Minerals.

Experimental Studies on Solar Photo-voltaic Refrigeration System. Masters thesis, King Fahd University of Petroleum and Minerals.

Study of the long-term degradation of boiler superheater tubes and its effects on remaining life predictions. Masters thesis, King Fahd University of Petroleum and Minerals.

Finite Element Modeling of Glass Fiber Reinforced Plastic Pipes under Impact Loading. Masters thesis, King Fahd University of Petroleum and Minerals.

Flexural Analysis and Material Characterization of Laser Welded 316L Steel Blanks. Masters thesis, King Fahd University of Petroleum and Minerals.

EFFECT OF PROCESS PARAMETERS ON MICROSTRUCTURE AND PROPERTIES OF SPARK PLASMA SINTERED AL-SIC NANOCOMPOSITES. Masters thesis, King Fahd University of Petroleum and Minerals.

AlCrN HARD COATING DEPOSITED BY MAGNETRON SPUTTERING- SCRATCH, WEAR AND CREEP BEHAVIOR. Masters thesis, King Fahd University of Petroleum and Minerals.

EFFECT OF SILVER COATING AND DOPING OF IRON AND COBALT ON THE OXYGEN PERMEABILITY OF La2NiO4. Masters thesis, King Fahd University of Petroleum and Minerals.

applications of oxy-fuel combustion technology into ion transport membrane reactors and gas turbine combustors. PhD thesis, King Fahd University of Petroleum and Minerals.

PERFORMANCE ANALYSIS OF SOLAR ABSORBING FLUIDS IN CHANNEL FLOW INCORPORATING SELECTIVE SURFACES. Masters thesis, King Fahd University of Petroleum and Minerals.

Development and Assessment of Solar-Assisted Gas Turbine Cogeneration Systems in Saudi Arabia. Masters thesis, King Fahd University of Petroleum and Minerals.

CHARACTERIZATION OF OIL WATER FLOW IN HORIZANATAL PIPES. Masters thesis, King Fahd University of Petroleum and Minerals.

DEVELOPMENT OF ULTRATHIN POLYCRYSTALLINE SILICON GERMANIUM FILMS AS STRUCTURAL LAYERS FOR APPLICATIONS IN NANOELECTROMECHANICAL SYSTEMS. PhD thesis, King Fahd University of Petroleum and Minerals.

WEAR BEHAVIOR OF MAGNESIUM BASED NANOCOMPOSITES. Masters thesis, King Fahd University of Petroleum and Minerals.

Immersion and Invariance Control Design for Unmanned Aerial Vehicle. Masters thesis, King Fahd University of Petroleum and Minerals.

Three Problems in Unconventional Coordinates Systems (Conduction in a spheroid, Flow in a semi-elliptic tube, and Conduction from a torus). Masters thesis, King Fahd University of Petroleum and Minerals.

Thermodynamic Analysis and Modeling Study of an Intermittent solar Adsorption Refrigeration System. Masters thesis, King Fahd University of Petroleum and Minerals.

Performance and Life Prediction Model for Photovoltaic Module: Effect of Encapsulant Constitutive Behavior. Masters thesis, King Fahd University of Petroleum and Minerals.

Pressure Sensing in Vicinity of Leaks for Leak Detection. Masters thesis, King Fahd University of Petroleum and Minerals.

CHARACTERIZATION OF GAS-OIL-WATER IN A HORIZONTAL PIPELINE. Masters thesis, King Fahd University of Petroleum and Minerals.

The Effect of Grain Growth Inhibitors to the Microstructural and Mechanical Properties of WC-Co NanoComposites. Masters thesis, King Fahd University of Petroleum and Minerals.

OPTIMIZATION OF IMPACT RESISTANCE OF COMPOSITE PLATES AND PIPES. Masters thesis, King Fahd University of Petroleum and Minerals.

NUMERICAL AND EXPERIMENTAL ANALYSIS OF PHOTOVOLTAIC PANEL COOLING. Masters thesis, King Fahd University of Petroleum and Minerals.

Load and Energy Analysis of a Commercial Building. Masters thesis, King Fahd University of Petroleum and Minerals.

MODELING OF A COMBINED ITM-POROUS OXYGEN TRANSPORT REACTOR: TOWARDS A SPATIALLY UNIFORM TEMPERATURE ITM. Masters thesis, King Fahd University of Petroleum and Minerals.

DEVELOPMENT AND CHARACTERIZATION OF EPOXY-CLAY ANOCOMPOSITES. PhD thesis, King Fahd University of Petroleum and Minerals.

Synthesis and Characterization of Thin MFI-type Zeolite Layer on Porous Alumina Substrates. Masters thesis, King Fahd University of Petroleum and Minerals.

INFLUENCE OF GAS RADIATION MODELS ON OXY-COMBUSTION CHARACTERISTICS PREDICTIONS. Masters thesis, King Fahd University of Petroleum and Minerals.

Look-Up Table for Two-Phase pressure Drop Multiplier. Masters thesis, King Fahd University of Petroleum and Minerals.

THERMAL ANALYSIS OF THERMOELECTRIC POWER GENERATOR; INCLUDING THERMAL STRESSES. Masters thesis, King Fahd University of Petroleum and Minerals.

Noise Reduction in Centrifugal Compressors using Helmholtz Resonators. Masters thesis, King Fahd University of Petroleum and Minerals.

NUMERICAL AND EXPERIMENTAL INVESTIGATIONS OF FRICTION STIR WELDING OF TUBE-TUBESHEET JOINTS. PhD thesis, King Fahd University of Petroleum and Minerals.

INFLUENCE OF CARBON NANOTUBES (CNT) ON THE MECHANICAL PROPERTIES OF THE POLYETHYLENE THERAPHTHALATE (PET)/CNT NANOCOMPOSITE FIBERS. Masters thesis, King Fahd University of Petroleum and Minerals.

ENHANCING THE BIOFOULING RESISTANCE OF REVERSE OSMOSIS MEMBRANES BY A NOVEL SURFACE MODIFICATION TECHNIQUE. PhD thesis, King Fahd University of Petroleum and Minerals.

Development and Characterization of Carbon Nanotubes (CNTs) And Silicon Carbide (SiC) Reinforced Al-based Nanocomposites. Masters thesis, King Fahd University of Petroleum and Minerals.

SYNTHESIS AND WEAR BEHAVIOR OF ALUMINUM 6061 ALLOY REINFORCED WITH CARBON NANOTUBES. Masters thesis, King Fahd University of Petroleum and Minerals.

IMPROVING QUALITY AND PRODUCTIVITY OF CASTING PROCESS BY USING ADVANCED SIMULATION AND RAPID PROTOTYPING TECHNOLOGY. Masters thesis, King Fahd University of Petroleum and Minerals.

Performance Analysis of Oxygen Transport Reactors Utilizing Ion Transport Membranes. Masters thesis, King Fahd University of Petroleum and Minerals.

Acoustic Noise Control Using Multiple Expansion Chambers. Masters thesis, King Fahd University of Petroleum and Minerals.

Modeling AND Optimization OF A Hybrid Solar Combined Cycle (HYCS). Masters thesis, King Fahd University of Petroleum and Minerals.

MULTI-PHYSICS MODELING OF PHOTOVOLTAIC MODULES AND ARRAYS WITH AUXILIARY THERMAL COLLECTORS. Masters thesis, King Fahd University of Petroleum and Minerals.

Balancing of Flexible Rotors at Low Speed. Masters thesis, King Fahd University of Petroleum and Minerals.

DEVELOPMENT OF MULTI-LAYERED GRADIENT CERAMIC MEMBRANE. Masters thesis, King Fahd University of Petroleum and Minerals.

Fluid Flow and Entropy Generation through a Throttling Valve. Masters thesis, King Fahd University of Petroleum and Minerals.

Degradation Mechanisms of Thermal Barrier Coatings Used in Land-Based Gas Turbine Blades Exposed to Low-Grade Fuel Impurities. Masters thesis, King Fahd University of Petroleum and Minerals.

Coordinate Search Method to Optimize Heat Flow on a Constructal Disc. Masters thesis, King Fahd University of Petroleum and Minerals.

Development of a Continuously Operated Solar Powered Refrigeration System. Masters thesis, King Fahd University of Petroleum and Minerals.

MODELING OF THERMAL PERFORMANCE OF LIQUID FLOW WITH NANOSIZED PARTICLES OF PHASE CHANGE MATERIAL IN MICROCHANNELS. Masters thesis, King Fahd University of Petroleum and Minerals.

Laser Melting of a Moving Slab in Relation to Surface Treatment Application. Masters thesis, King Fahd University of Petroleum and Minerals.

Performance Evaluation of Seawater Counter Flow Cooling Towers. Masters thesis, King Fahd University of Petroleum and Minerals.

MODELING AND ANALYSIS OF HYBRID PV/WIND OFF GRID POWER GENERATION SYSTEM IN THE KINGDOM OF SAUDI ARABIA. Masters thesis, King Fahd University of Petroleum and Minerals.

EXPERIMENTAL AND NUMERICAL STUDY OF THE ENHANCEMENT PARAMETERS ON A DOUBLE SLOPE SOLAR STILL PRODUCTIVITY. Masters thesis, King Fahd University of Petroleum and Minerals.

(2011) PERFORMANCE CHARACTERISTICS OF SOLAR AIR HEATED HDH DESALINATION SYSTEM. Masters thesis, King Fahd University of Petroleum and Minerals.

(2010) Effect of Sonication Time and Clay Loading on Nanoclay Dispersion, Tensile and Hardness Properties of Epoxy-Clay Nanocomposite. Masters thesis, King Fahd University of Petroleum and Minerals.

(2010) FINITE ELEMENT MODELING OF RING SPLITTING TEST TO PREDICT RESIDUAL STRESSES IN SPIRAL WELDED PIPE. Masters thesis, King Fahd University of Petroleum and Minerals.

(2010) Impact of Combined Mechanical Damage on the Integrity of Pipelines. PhD thesis, King Fahd University of Petroleum and Minerals.

(2010) A study of Mechanical Properties and Processability of Blown Films Using b-LLDPE and LDPE Blends. Masters thesis, King Fahd University of Petroleum and Minerals.

(2010) WATER WAVE PROPAGATION ON NONUNIFORM BOTTOM. Masters thesis, King Fahd University of Petroleum and Minerals.

(2010) LARGE EDDY SIMULATION OF THE FLOW AROUND BLUFF BODY WITH DRAG REDUCTION DEVICE. Masters thesis, King Fahd University of Petroleum and Minerals.

(2010) "Reconfigurable Flight Control of a Fighter Aircraft, with Wind Tunnel Study" by Bilal A. Siddiqui, April 2010. Masters thesis, King Fahd University of Petroleum and Minerals.

(2010) EXPERIMENTAL AND NUMERICAL STUDY OF OPEN-AIR ACTIVE COOLING. Masters thesis, King Fahd University of Petroleum and Minerals.

(2010) PERFORMANCE ANALYSIS OF CHILLED WATER SYSTEMS AND THE EFFECT OF INCORPORATION OF EJECTOR COOLING SYSTEM. Masters thesis, King Fahd University of Petroleum and Minerals.

(2009) THERMAL ANALYSIS AND OPTIMIZATION OF ANNULAR FINS WITH SIMULTANEOUS HEAT AND MASS TRANSFER. Masters thesis, King Fahd University of Petroleum and Minerals.

(2009) Dynamic Modeling of Rotating Flexible Pipe Conveying Fluid and Subjected to External Axial Flow. PhD thesis, King Fahd University of Petroleum and Minerals.

(2010) THREE-DIMENSIONAL SIMULATION OF LASER GAS-ASSISTED CUTTING: JET IMPINGEMENT CONSIDERATIONS. PhD thesis, King Fahd University of Petroleum and Minerals.

(2009) EFFECT OF BLEND RATIO OF h-LLDPE WITH LDPE ON THE PROCESSABLITY AND THE MECHANICAL PROPERTIES OF BLOWN FILMS. Masters thesis, King Fahd University of Petroleum and Minerals.

(2009) Modeling, Analysis and Optimization of the Thermal Performance of Air Conditioners. Masters thesis, King Fahd University of Petroleum and Minerals.

(2009) EXPERIMENTAL AND NUMERICAL INVESTIGATION OF FLOW INDUCED VIBRATION IN A HIGH PRESSURE DOUBLE VOLUTE CENTRIFUGAL PUMP. PhD thesis, King Fahd University of Petroleum and Minerals.

(2009) A Continuum Model for Elastic Waves in Embedded Carbon Nanotube Composites. Masters thesis, King Fahd University of Petroleum and Minerals.

(2009) The Effect of Magnetic Field on Combustion and Emissions. Masters thesis, King Fahd University of Petroleum and Minerals.

(2009) PARAMETRIC STUDY OF SHORT PERIODIC SPEED CONTROL HUMPS ON A ROAD VEHICLE DYNAMIC. Masters thesis, King Fahd University of Petroleum and Minerals.

(2005) FATIGUE BEHAVIOUR OF HIC DAMAGED LINE PIPE STEEL. Masters thesis, King Fahd University of Petroleum and Minerals.

(2009) Experimental Comparison of Calcium Sulfate (CaSO4) Scale Deposition on Coated Carbon Steel and Titanium Surfaces. Masters thesis, King Fahd University of Petroleum and Minerals.

(2009) FRICTION AND WEAR OF 20% VOLUME FRACTION SUBMICRON Al2O3/6061 ALUMINUM ALLOY COMPOSITE FOR BRAKE SYSTEM APPLICATION. Masters thesis, King Fahd University of Petroleum and Minerals.

(2009) Analysis and Modeling of Hot Extrusion Die for its Service Life Enhancement. PhD thesis, King Fahd University of Petroleum and Minerals.

(2009) EFFECT OF FLUID HYDRODYNAMICS ON CALCIUM SULFATE "CASO4" DEPOSITION ON ALUMINUM METAL SURFACE. Masters thesis, King Fahd University of Petroleum and Minerals.

(2004) Cryogenic drilling of KevlarTM composite laminates. Masters thesis, King Fahd University of Petroleum and Minerals.

(2006) Experimental and numerical analyses of mixed mode crack initiation angle. Masters thesis, King Fahd University of Petroleum and Minerals.

(2005) Effect of piezoelectric actuator placement on controlling the modes of vibration for flexible structures. Masters thesis, King Fahd University of Petroleum and Minerals.

(2005) Finite element analysis of stick-slip vibrations in drillstrings. Masters thesis, King Fahd University of Petroleum and Minerals.

(2005) Prediction of turbulent heat transfer in a rotating narrow rectangular channel (AR=10) oriented at 120° from the direction of rotation. Masters thesis, King Fahd University of Petroleum and Minerals.

(2005) Continuous proximate time-optimal control for a third order servomechanism having a plant with three real roots. Masters thesis, King Fahd University of Petroleum and Minerals.

(2004) Entropy generation around a solid sphere in a gas stream. Masters thesis, King Fahd University of Petroleum and Minerals.

(2005) A study of the static and dynamic properties of Al-Based A1₂O₃ metal matrix composites. Masters thesis, King Fahd University of Petroleum and Minerals.

(2004) Effect of bolt layout on the mechanical behavior of bolted joint. Masters thesis, King Fahd University of Petroleum and Minerals.

(2005) Numerical investigation of erosion of a pipe protruded in a sudden contraction. Masters thesis, King Fahd University of Petroleum and Minerals.

(2005) The effect of environmental conditions on the hydrostatic burst pressure and impact performance of glass fiber reinforced thermoset pipes. Masters thesis, King Fahd University of Petroleum and Minerals.

(2005) Effects of strain rate and temperature on fracture toughness and tensile properties of CPVC. Masters thesis, King Fahd University of Petroleum and Minerals.

(2004) Design, rating and exergy analysis of evaporative heat exchangers. Masters thesis, King Fahd University of Petroleum and Minerals.

(2005) Laser evaporative heating in relation to machining. Masters thesis, King Fahd University of Petroleum and Minerals.

(2004) Effect of frequency on crack propagation in CPVC and HDPE at different temperatures. Masters thesis, King Fahd University of Petroleum and Minerals.

(2005) Laminar mixed convection in vertical channels. Masters thesis, King Fahd University of Petroleum and Minerals.

(2006) Effect of environment on the fatigue and the tensile properties of glass fiber reinforced vinyl ester and epoxy thermosets. Masters thesis, King Fahd University of Petroleum and Minerals.

(1999) Wind tunnel testing of an airfoil with a moving surface boundary-layer control. Masters thesis, King Fahd University of Petroleum and Minerals.

(1999) The effect of aging on the fatigue strength of alloy 800HT. Masters thesis, King Fahd University of Petroleum and Minerals.

(2001) Analytical and finite element investigation of initial clearance effect on tube-to-tubesheet joint strength. Masters thesis, King Fahd University of Petroleum and Minerals.

(1996) Quantitative and subjective assessments of indoor air quality in KFUPM buildings. Masters thesis, King Fahd University of Petroleum and Minerals.

(1993) Performance evaluation and multiobjective optimization of passive vehicle suspension systems. Masters thesis, King Fahd University of Petroleum and Minerals.

(1990) Prediction of species concentration and temperature profile in methanol oxygen and argon flame. Masters thesis, King Fahd University of Petroleum and Minerals.

(1994) Identification of block cascade models of nonlinear systems. Masters thesis, King Fahd University of Petroleum and Minerals.

(2003) Test facility development for small centrifugal compressors (design stage). Masters thesis, King Fahd University of Petroleum and Minerals.

(1996) Vibration control of rotor-bearing systems using neural networks. Masters thesis, King Fahd University of Petroleum and Minerals.

(1995) Calculations of turbulent flow and heat transfer in periodically converging-diverging channels. Masters thesis, King Fahd University of Petroleum and Minerals.

(1994) Mixed convection from a horizontal cylinder rotating in a cooling cross-stream. Masters thesis, King Fahd University of Petroleum and Minerals.

(1993) Heat transfer mechanisms governing laser metal interactions. Masters thesis, King Fahd University of Petroleum and Minerals.

(1989) Second law analysis and optimization of solar hot water systems. Masters thesis, King Fahd University of Petroleum and Minerals.

(2004) Investigations on the influence of disk location and unbalance on fluid induced vibrations of a shaft-disk-bearing system. Masters thesis, King Fahd University of Petroleum and Minerals.

(1993) Calculations of fluid flow and heat transfer in expanding ducts. Masters thesis, King Fahd University of Petroleum and Minerals.

(2002) Carburization behavior of iron-based alloys in methane/hydrogen gas mixtures. PhD thesis, King Fahd University of Petroleum and Minerals.

(1994) Nonholonomic motion planning for wheeled mobile systems using geometric phases. Masters thesis, King Fahd University of Petroleum and Minerals.

(1998) Some quality and reliability aspcts of aluminium extrusion process. Masters thesis, King Fahd University of Petroleum and Minerals.

(1995) Investigation of fatigue crack growth rates under variable amplitude loading. Masters thesis, King Fahd University of Petroleum and Minerals.

(1997) Mathematical modeling and optimization of precipitation hardening of extrudable aluminium alloys. Masters thesis, King Fahd University of Petroleum and Minerals.

(2002) Finite element modeling and analysis of rotor-bearing systems. Masters thesis, King Fahd University of Petroleum and Minerals.

(1992) Supersonic jet impingement on a flat surface at angles from -5° to 30°. Masters thesis, King Fahd University of Petroleum and Minerals.

(1986) Heat transfer characteristics of ice solidification using a two-phase closed thermosyphon. Masters thesis, King Fahd University of Petroleum and Minerals.

(2004) Modeling and analysis of extrusion pressure and die life for complex aluminum profiles. PhD thesis, King Fahd University of Petroleum and Minerals.

(1995) Forced flow in the entry region of concentric annuli with impulsively rotated inner walls. Masters thesis, King Fahd University of Petroleum and Minerals.

(1994) Control of hypersonic flight trajectories to minimize heat load. Masters thesis, King Fahd University of Petroleum and Minerals.

(1996) Performance evaluation of a new type of titanium nitride (TiN) coated twist drill. Masters thesis, King Fahd University of Petroleum and Minerals.

(1998) Conjugate natural convection heat transfer in vertical coconcentric annuli. Masters thesis, King Fahd University of Petroleum and Minerals.

(2001) Conduction and non-conduction limited laser heating process- mathematical simulation. Masters thesis, King Fahd University of Petroleum and Minerals.

(2003) Optimization of a packaged air conditioning unit performance using an experimentally validated CFD model. Masters thesis, King Fahd University of Petroleum and Minerals.

(2002) Finite element dynamic analysis of drillstring. Masters thesis, King Fahd University of Petroleum and Minerals.

(1997) Second-law-based thermoeconomic analysis and optimization of thermal-energy-storage systems. Masters thesis, King Fahd University of Petroleum and Minerals.

(1990) Reliable life prediction models for various material damage processes. Masters thesis, King Fahd University of Petroleum and Minerals.

(2000) Heat and mass transfer analysis of liquid desiccant-air contact system in a gauze-type structured packing tower. Masters thesis, King Fahd University of Petroleum and Minerals.

(2002) Energy and exergy analyses of crude oil distillation plants. Masters thesis, King Fahd University of Petroleum and Minerals.

(2000) Transient temperature distibution in a tubesheet of a fixed tubesheet heat exchanger. Masters thesis, King Fahd University of Petroleum and Minerals.

(1991) Numerical investigation of laminar natural convection flows in obstructed vertical channels. Masters thesis, King Fahd University of Petroleum and Minerals.

(1997) Finite element dynamic analysis of multibody rotor-bearing system with cracked shaft. PhD thesis, King Fahd University of Petroleum and Minerals.

(1995) Heat transfer in eccentric annuli. PhD thesis, King Fahd University of Petroleum and Minerals.

(1992) Coupled bending torsional vibration of rotating shafts using finite element. Masters thesis, King Fahd University of Petroleum and Minerals.

(1995) Reliability-based maintenance strategies for heat exchanges subject to fouling. Masters thesis, King Fahd University of Petroleum and Minerals.

(1999) Transient response of varying thickness timoshenko beam under point load. Masters thesis, King Fahd University of Petroleum and Minerals.

(1998) Heat convection from an oscillating cylinder. PhD thesis, King Fahd University of Petroleum and Minerals.

(2004) Impact testing of brittle materials using split hopkinson pressure bar technique. Masters thesis, King Fahd University of Petroleum and Minerals.

(1995) Effect of heat treatment on the flow induced corrosion of aluminum-SiC(p). Masters thesis, King Fahd University of Petroleum and Minerals.

(2000) Effect of temperature on the fatigue behavior of plain weave woven carbon fabric-reinforced composite plastic. Masters thesis, King Fahd University of Petroleum and Minerals.

(1999) Investigation of mixed mode crack initiation angles under different loading conditions. Masters thesis, King Fahd University of Petroleum and Minerals.

(1997) Design and performance evaluation of refrigeration systems using thermodynamic models. Masters thesis, King Fahd University of Petroleum and Minerals.

(1996) Effect of thermal-hydraulic parameters on CaCO₃ scalling in heat exchangers. Masters thesis, King Fahd University of Petroleum and Minerals.

(1996) Numerical simulation of turbulent natural convection in enclosures. Masters thesis, King Fahd University of Petroleum and Minerals.

(1993) Modelling and antiswing control of overhead cranes. Masters thesis, King Fahd University of Petroleum and Minerals.

(1992) Second-law-based thermodynamic analysis of vapor-compression refrigeration cycles. Masters thesis, King Fahd University of Petroleum and Minerals.

(1993) Weibull analysis of cutting tools and dies. Masters thesis, King Fahd University of Petroleum and Minerals.

(2002) Thermo-mechanical modeling of tool and workpiece interface in metal forming process. Masters thesis, King Fahd University of Petroleum and Minerals.

(2002) Conjugate free convection heat transfer in vertical eccentric annuli. Masters thesis, King Fahd University of Petroleum and Minerals.

(1992) Optimal assessment of using solar and wind power for desalination on the Eastern coast of Saudi Arabia. Masters thesis, King Fahd University of Petroleum and Minerals.

(2000) Crack propagation in CPVC at different temperatures. Masters thesis, King Fahd University of Petroleum and Minerals.

(1998) Numerical investigation of pulsating flows in abrupt expansion pipes. Masters thesis, King Fahd University of Petroleum and Minerals.

(1997) A Robust design methodology for structural control using piezoelectric materials. Masters thesis, King Fahd University of Petroleum and Minerals.

(1999) Torsional vibrations analysis of a synchronous motor-compressor drive train. Masters thesis, King Fahd University of Petroleum and Minerals.

(1997) Performance evaluation of shell-and-tube heat exchangers: a numerical approach. Masters thesis, King Fahd University of Petroleum and Minerals.

(1997) Role of sodium chloride in low temperaturs hot corrosion of superalloys. Masters thesis, King Fahd University of Petroleum and Minerals.

(2001) Investigation of heat and moisture transfer during solids drying. Masters thesis, King Fahd University of Petroleum and Minerals.

(1999) Conjugate forced convection heat transfer in eccentric annuli. Masters thesis, King Fahd University of Petroleum and Minerals.

(1990) Determining velocity, temperature and occupancy comfort within a 3-D room. Masters thesis, King Fahd University of Petroleum and Minerals.

(1996) Analysis of turbulent transport properties in the near field of an isothermal free jet. Masters thesis, King Fahd University of Petroleum and Minerals.

(2004) Transient impulsive flow about a sphere in a gas stream. Masters thesis, King Fahd University of Petroleum and Minerals.

(1992) Fatigue life predictions of notched members in Arabian Gulf Water. Masters thesis, King Fahd University of Petroleum and Minerals.

(2001) Dynamic response of fluid-loaded composite plates to stationary and moving loads. Masters thesis, King Fahd University of Petroleum and Minerals.

(1996) An experimental investigation of heat transfer in the thermally developing region of a pulsating pipe flow. Masters thesis, King Fahd University of Petroleum and Minerals.

(1988) Integral methods for transpired boundary layer flow. Masters thesis, King Fahd University of Petroleum and Minerals.

(1996) Fatigue damage characterization and life prediction in carbon fiber reinforced plastic composites. Masters thesis, King Fahd University of Petroleum and Minerals.

(1979) A Comoputer-assisted analysis for thermodynamic processes and cycles. Masters thesis, King Fahd University of Petroleum and Minerals.

(2001) Sulfide stress cracking of dissimilar metal welds. Masters thesis, King Fahd University of Petroleum and Minerals.

(2003) A Study of tensile and microhardness properties of m-LLDPE/LDPE blends. Masters thesis, King Fahd University of Petroleum and Minerals.

(1989) Vibration analysis of point and column supported mindlin plates. Masters thesis, King Fahd University of Petroleum and Minerals.

(2003) Performance evaluation of (HVOF) thermal spray coating using INCONEL-625 powder. Masters thesis, King Fahd University of Petroleum and Minerals.

(1997) An experimental investigation for the effect of pulsation on heat transfer characteristics in pipes. Masters thesis, King Fahd University of Petroleum and Minerals.

(1998) Effects of blending MTBE, methanol, or ethanol with gasoline on performance and exhaust emissions of SI engines. Masters thesis, King Fahd University of Petroleum and Minerals.

(1994) Design of composite die for wire drawing. Masters thesis, King Fahd University of Petroleum and Minerals.

(1990) Vibration frequencies of rotating tapered beam including rotary inertia and transverse shear deformation. Masters thesis, King Fahd University of Petroleum and Minerals.

(1995) Dynamic modeling and analysis of axially moving beam with prismatic and revolute joints. PhD thesis, King Fahd University of Petroleum and Minerals.

(1992) Experimental determination of heat transfer coefficient for water-lithium bromide mixture. Masters thesis, King Fahd University of Petroleum and Minerals.

(2005) Finite element analysis of stick-slip vibrations in drillstrings. Masters thesis, King Fahd University of Petroleum and Minerals.

(1999) Design and performance evaluation of evaporative cooling towers. Masters thesis, King Fahd University of Petroleum and Minerals.

(2002) Fouling analysis and its mitigation in heat exchangers. PhD thesis, King Fahd University of Petroleum and Minerals.

(1994) Energy and exergy analysis of Ghazlan Power Plant. Masters thesis, King Fahd University of Petroleum and Minerals.

(2001) The Effect of temperature dependent viscosity variation on the performance of heat exchangers. Masters thesis, King Fahd University of Petroleum and Minerals.

(1993) An expert system for designing hydrodynamic journal bearings. Masters thesis, King Fahd University of Petroleum and Minerals.

(2002) Wakel flow with varying separatin points. PhD thesis, King Fahd University of Petroleum and Minerals.

(2002) Oxidation/carburization behavior of high temperature alloys. Masters thesis, King Fahd University of Petroleum and Minerals.

(1992) Unsteady natural convection in open ended vertical concentric annuli. Masters thesis, King Fahd University of Petroleum and Minerals.

(1995) Assessment, prediction and enhancement of the reliability of extrusion dies. Masters thesis, King Fahd University of Petroleum and Minerals.

(1992) Experimental investigations of the vortex flow behind a circular cone at high angles of attack. Masters thesis, King Fahd University of Petroleum and Minerals.

(2003) Transiently developing free and opposing jets in relation to gas-assisted laser evaporative heating process. Masters thesis, King Fahd University of Petroleum and Minerals.

(2005) Effect of piezoelectric actuator placement on controlling the modes of vibration for flexible structures. Masters thesis, King Fahd University of Petroleum and Minerals.

(2006) Experimental and numerical analyses of mixed mode crack initiation angle. Masters thesis, King Fahd University of Petroleum and Minerals.

(1988) A generalized approach to the machining economics optimization. Masters thesis, King Fahd University of Petroleum and Minerals.

(1996) Analysis of fluid flow and heat transfer around and inside a liquid sphere. PhD thesis, King Fahd University of Petroleum and Minerals.

(2001) Weibull reliability analysis and maintenance strategies of rotating equipment. Masters thesis, King Fahd University of Petroleum and Minerals.

(2003) Natural convection flow in parallel-plate vertical channels. Masters thesis, King Fahd University of Petroleum and Minerals.

(1990) Modelling of chemical kinetics of methane/nitrogen dioxide/oxygen flames. Masters thesis, King Fahd University of Petroleum and Minerals.

(1995) Computational study of the flowfield through a cascade of NACA 0012 Airfoils. Masters thesis, King Fahd University of Petroleum and Minerals.

(1992) Numerical simulation of ice crystal growth (initial frosting process). Masters thesis, King Fahd University of Petroleum and Minerals.

(1982) Analysis of turbulent, axisymmetric, dense jets discharged to quiescent, uniform or stratified ambients. Masters thesis, King Fahd University of Petroleum and Minerals.

(1988) Investigations on a flat, square plate at high incidence in a low speed flow. Masters thesis, King Fahd University of Petroleum and Minerals.

(1996) Mixed convection from an elliptic tube placed in a fluctuating free stream. PhD thesis, King Fahd University of Petroleum and Minerals.

(1984) Stochastic approach for modeling machining process variables. Masters thesis, King Fahd University of Petroleum and Minerals.

(1981) Effect of speed control humps on vehicle dynamics. Masters thesis, King Fahd University of Petroleum and Minerals.

(1985) Heat convection from a horizontal cylinder in a quiescent fluid. Masters thesis, King Fahd University of Petroleum and Minerals.

(2005) Effect of outflow orientation and multiple jets orifice plate configurations on heat transfer in a rectangular duct. Masters thesis, King Fahd University of Petroleum and Minerals.

(1997) Liquid desiccant and its application for pipeline drying. Masters thesis, King Fahd University of Petroleum and Minerals.

(1996) Three-dimensional transient temperature analysis of friction welding of cylindrical bars. Masters thesis, King Fahd University of Petroleum and Minerals.

(1987) Experiments on a flat square plate at high angles of attack. Masters thesis, King Fahd University of Petroleum and Minerals.

(1996) Hybrid liquid desiccant based air-conditioning system. Masters thesis, King Fahd University of Petroleum and Minerals.

(2000) Detection of a transverse crack in a rotating shaft using wavelet transform. Masters thesis, King Fahd University of Petroleum and Minerals.

(2000) An experimental investigation of stall characteristics in a vaneless diffuser. PhD thesis, King Fahd University of Petroleum and Minerals.

(1996) Analysis of turbulent transport properties in a swirling flow of a Can-type combustor. Masters thesis, King Fahd University of Petroleum and Minerals.

(2001) Effect of intermetallic phases on corrosion of Aluminum-Silicon Carbide (Al-SiCp) composites. Masters thesis, King Fahd University of Petroleum and Minerals.

(2005) Modelling of blood flow in a time-varying shape passage. Masters thesis, King Fahd University of Petroleum and Minerals.

(1993) Comparative study of different methods of vibration control of rotor bearing systems. Masters thesis, King Fahd University of Petroleum and Minerals.

(1986) Analytical calculation of bow shock waves from delta shaped supersonic lifting wings. Masters thesis, King Fahd University of Petroleum and Minerals.

(1997) A methodology for the optimization of rolling process. Masters thesis, King Fahd University of Petroleum and Minerals.

(2002) A Study of dehumidification and regeneration processes in a hybrid cooling system. Masters thesis, King Fahd University of Petroleum and Minerals.

(1976) Tooth tip losses in external gear pumps. Masters thesis, King Fahd University of Petroleum and Minerals.

(1997) Surface roughness measurement using laser detection technique. Masters thesis, King Fahd University of Petroleum and Minerals.

(1993) Heat Transfer Mechanisms Governing Laser Metal Interactions. Masters thesis, KING FAHD UNIVERSITY OF PETROLEUM & MINERALS.

(1993) Performance Evaluation and Multiobjective Optimization of Passive Vehicle Suspension Systems. Masters thesis, KING FAHD UNIVERSITY OF PETROLEUM & MINERALS.

(1992) Supersonic Jet Impingement on a Flat Surface at Angles from -50 to -300. Masters thesis, KING FAHD UNIVERSITY OF PETROLEUM & MINERALS.

(1992) Coupled Bending Torsional Vibration of Rotating Shafts Using Finite Element. Masters thesis, KING FAHD UNIVERSITY OF PETROLEUM & MINERALS.

(1993) Weilbull Analysis of Cutting Tools and Dies. Masters thesis, KING FAHD UNIVERSITY OF PETROLEUM & MINERALS.

(1993) Modelling and Antiswing Control of Overhead Cranes. Masters thesis, KING FAHD UNIVERSITY OF PETROLEUM & MINERALS.

(1992) Second-Law-Based Thermodynamic Analysis of Vapor-Compression Refrigeration Cycles. Masters thesis, KING FAHD UNIVERSITY OF PETROLEUM & MINERALS.

(1992) Optimal Assessment of Using Solar and Wind Power for Desalination on the Eastern Coast of Saudi Arabia. Masters thesis, KING FAHD UNIVERSITY OF PETROLEUM & MINERALS.

(1992) Fatigue Life Predictions of Notched Members in Arabian Gulf Water. Masters thesis, KING FAHD UNIVERSITY OF PETROLEUM & MINERALS.

(1992) Experimental Determination of Heat Transfer Coefficient for Water-Lithium Bromide Mixture. Masters thesis, KING FAHD UNIVERSITY OF PETROLEUM & MINERALS.

(1993) An Expert System for Designing Hydrodynamic Journal Bearings. Masters thesis, KING FAHD UNIVERSITY OF PETROLEUM & MINERALS.

(1992) Unsteady Natural Convection in Open Ended Vertical Concentric Annuli. Masters thesis, KING FAHD UNIVERSITY OF PETROLEUM & MINERALS.

(1992) Numerical Simulation of Ice Crystal Growth (Initial Frosting Process). Masters thesis, KING FAHD UNIVERSITY OF PETROLEUM & MINERALS.

Article

(2004) SHAFT LATERAL AND TORSIONAL VIBRATION RESPONSES TO BLADE(S) RANDOM VIBRATION EXCITATION. The Arabian Journal for Science and Engineering, 29 (1C). pp. 39-67.

Influence of water immersion on the single-lap shear strength of aluminum joints bonded with aluminum-powder-filled epoxy adhesive. Journal of Adhesion Science and Technology.

SOME OBSERVATIONS ON PRESSURE DISTRIBUTION AND DIE FAILURE MODES IN HOT EXTRUSION. The 6th Saudi Engineering Conference, KFUPM, Dhahran, December 2002.

CORROSION BEHAVIOR OF POWDER METALLURGY ALUMINUM ALLOY 6061/AL2O3 METAL MATRIX COMPOSITES. The 6th Saudi Engineering Conference, KFUPM, Dhahran, December 2002.

RELIABILITY OF DISSIMILAR METAL WELDS SUBJECTED TO SULFIDE STRESS CRACKING. The 6th Saudi Engineering Conference, KFUPM, Dhahran, December 2002.

FATIGUE DAMAGE IN WOVEN CARBON FABRIC/EPOXY LAMINATES AT NON-AMBIENT TEMPERATURES. The 6th Saudi Engineering Conference, KFUPM, Dhahran, December 2002.

FINITE ELEMENT INVESTIGATION OF INITIAL CLEARANCE EFFECT ON TUBE-TO-TUBESHEET JOINT STRENGTH. The 6th Saudi Engineering Conference, KFUPM, Dhahran, December 2002.

ON THE INVESTIGATION OF VIBRATION SIGNALS USING JOINT TIME FREQUENCY ANALYSIS. The 6th Saudi Engineering Conference, KFUPM, Dhahran, December 2002.

TIP DEFLECTION ESTIMATION OF A ROTATING CANTILEVERED BEAM. The 6th Saudi Engineering Conference, KFUPM, Dhahran, December 2002.

EXPERIMENTAL STUDY OF HYBRID LIQUID DESICCANT BASED VAPOR COMPRESSION COOLING SYSTEM. The 6th Saudi Engineering Conference, KFUPM, Dhahran, December 2002.

THE USE OF AN OPEN CYCLE ABSORPTION SYSTEM IN AUTOMOBILES AS AN ALTERNATIVE TO CFCS. The 6th Saudi Engineering Conference, KFUPM, Dhahran, December 2002.

FUEL CONSUMPTION OF A SPARK IGNITION ENGINE BLENDED WITH MTBE. The 6th Saudi Engineering Conference, KFUPM, Dhahran, December 2002.

(2007) Laser Short-Pulse Heating of a Three Layer Assembly and the Seebeck Effect. Journal for Lasers in Engineering, 10. pp. 1-20.

(2005) Investigation Into The Seebeck Coefficient in Two-Layer Assembly During Laser Short-Pulse Heating. Japanese Journal of Applied Physics, 44 (8). pp. 6068-6074.

(2007) An Analysis Method for Inertial Particle Separator. AIAA Journal of Aircraft, 44 (4). pp. 1150-1158.

(2005) Numerical Correlations for Heat Transfer From an Array of Hot-Air Jets Impinging on a 3D Concave Surface. AIAA Journal of Aircraft, 42 (3). pp. 665-670.

(2004) An Iterative Inverse Design Method Based on Aerodynamic Streamline Equations. AIAA Journal of Aircraft, 41 (4). pp. 821-828.

(2005) A study on thermodynamic potential energy for magnetostrictive system. International Journal of Exergy, 2 (3). pp. 246-259.

(2004) Finite Element Modeling of Magnetostrictive Smart Structures. The Arabian Journal for Science and Engineering, 29 (1C). pp. 125-138.

Second-law-based performance evaluation of cooling towers and evaporative heat exchangers. INTERNATIONAL JOURNAL OF THERMAL SCIENCES 46 (2) 2006.

(2005) Conjugate Effects on Steady Laminar Natural Convection Heat Transfer in Vertical Eccentric Annuli. International Journal for Computational Methods in Engineering Science and Mechanics, 6 (4). pp. 235-250.

An improved non-dimensional model of wet-cooling towers. PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART E-JOURNAL OF PROCESS MECHANICAL ENGINEERING 220 , 2005.

A comprehensive design and rating study of evaporative coolers and condensers. Part II. Sensitivity analysis. International Journal of Refrigeration 29 (2006) 659–668.

A comprehensive design and rating study of evaporative coolers and condensers. Part I. Performance evaluation. International Journal of Refrigeration 29 (2006) 645–658.

Monograph

ME-489 FEA in Mechanical Engineering_Project Final Report. Project Report. AE Department. (Submitted)

ME 204 Design Problem Project. Project Report. AE Department. (Submitted)

ME 413 PROJECR REPORT (SYSTEM CONTROL). Project Report. SALMAN AL-FIFI. (Unpublished)