KFUPM ePrints

Items where Subject is "Civil Engineering > Transportation Engineering"

Up a level
Export as [feed] RSS 2.0 [feed] RSS 1.0 [feed] Atom
Group by: Creators | Item Type
Number of items at this level: 102.

Article

Ratrout, N.T PROPOSED MODIFICATIONS TO THE CIVIL ENGINEERING PROGRAM AT KFUPM TO FULFILL 2008-2009 ABET CRITERIA AND THE KFUPM PROGRAM REQUIREMENTS. PROPOSED MODIFICATIONS TO THE CIVIL ENGINEERING PROGRAM AT KFUPM TO FULFILL 2008-2009 ABET CRITERIA AND THE KFUPM PROGRAM REQUIREMENTS.

Ratrout, N.T and Al-Abdulwahhab, Hamad I. and Al-Ofi, Khalaf Aidhah REASONS FOR TIRE EXPLOSION AND METHODS TO REDUCE ITS ASSOCIATED TRAFFIC ACCIDENTS. REASONS FOR TIRE EXPLOSION AND METHODS TO REDUCE ITS ASSOCIATED TRAFFIC ACCIDENTS.

Al-Ahmadi, H.M (1999) Captivity revisited. Captivity revisited.

Al-Ahmadi, H.M Effect of geotextiles on the load-carrying capacity and deformation characteristics of sabkha soil. Effect of geotextiles on the load-carrying capacity and deformation characteristics of sabkha soil.

Al-Ahmadi, H.M (2006) Effect of geotextile and cement on the performance of sabkha subgrade. Effect of geotextile and cement on the performance of sabkha subgrade.

Al-Ofi, K.A (2007) Validation and improvement of a rear-end conflict prediction model. Transportation Research Records.

Al-Senan, S.H (1987) Prediction Of Head-On Accident Sites. Transportation Research Record.

Ratrout, N.T (2006) Adequacy of the tensile/elongation test as a quality control criterion for vehicle tires. Polymer Testing.

Ratrout, N.T (2004) Validation and improvement of a rear-end conflict prediction model. Transportation Research Record.

Al-Abdul Wahab, H.I (2006) Rheological investigation of the influence of acrylate polymers on the modification of asphalt. Journal of Applied Polymer Science.

Ratrout, N.T (2005) Tire condition and drivers' practice in maintaining tires in Saudi Arabia. Accident Analysis and Preventio.

Al-Abdul Wahab, H.I (2006) Influence of polymer type and structure on polymer modified asphalt concrete mix. Canadian Journal of Chemical Engineering.

Al-Abdul Wahab, H.I (2002) Journal of Materials in Civil Engineering. Journal of Materials in Civil Engineering.

Al-Abdul wahab, H.I (2002) Clegg hammer - California-bearing ratio correlations. Journal of Materials in Civil Engineering.

Al-Abdul Wahab, H.I (2002) Stabilization of dune sand using foamed asphalt. Geotechnical Testing Journal.

Al-Abdul Wahab, H.I (2001) Modeling resilient modulus and temperature correction for Saudi roads. Journal of Materials in Civil Engineering.

Al-Abdul Wahab, H.I (1999) Characterization of polymer modified Gulf asphalts. Petroleum Science and Technology.

Al-Abdul Wahab, H.I (1999) Optimization of steel slag aggregates for bituminous mixes in Saudi Arabia. Journal of Materials in Civil Engineering.

Al-Abdul Wahab, H.I (1999) Prediction of asphalt rheological properties using HP-GPC. Journal of Materials in Civil Engineering.

Al-Abdul wahab, H.I (1999) Use of an analytical hierarchy process in pavement maintenance priority ranking. Journal of Quality in Maintenance Engineering.

Al-Abdul Wahab, H.I (1998) Laboratory study of asphalt concrete durability in Jeddah. Building and Environment.

Al-Abdul Wahab, H.I (1998) Polymer modification of Arab asphalt. Journal of Materials in Civil Engineering.

Al-Abdul Wahab, H.I (1998) Performance of a stabilized marl base: A case study. Construction and Building Materials.

Al-Abdul Wahab, H.I (1998) Physicochemical characterization of Gulf asphalts. Petroleum Science and Technology.

Al-Abdul Wahab, H.I (1998) Performance-based characterization of Arab Asphalt. Building and Environment.

Al-Abdul Wahab, H.I (1998) Improving slurry seal performance in Eastern Saudi Arabia using steel slag. Construction and Building Materials.

Al-Abdul Wahab, H.I (1998) Evaluation of Arabian asphalt binder for low-temperature cracking. Journal of Materials in Civil Engineering.

Al-Abdul Wahab, H.I (1997) Performance modeling of Arabian asphalt using HP-GPC. Journal of Materials Engineering and Performance.

Al-Abdul Wahab, H.I (1997) Temperature variation of flexible and rigid pavements in Eastern Saudi Arabia. Building and Environment.

Al-Abdul Wahab, H.I (1997) Improvement of marl and dune sand for highway construction in arid areas. Building and Environment.

Al-Abdul Wahab, H.I (1997) Development of performance-based bitumen specifications for the Gulf countries. Construction and Building Materials.

Al-Abdul wahab, H.I (1991) Laboratory evaluation of reclaimed rubber asphaltic concrete mixes. Journal of Materials in Civil Engineering.

Baig, Ghouse (1998) Mechanistic Evaluation of Hedmanite and Lime Modified Asphalt Concrete Mixtures. Journal of Materials in Civil Engineering,, 10 (3). pp. 153-160.

Conference or Workshop Item

Al-Abdulwahhab, Hamad I. and MG, Baig and I.A, mahmoud and H.M, kattan Evaluation of Foam Asphalt Technology for Road Bases Construction in the Gulf. In: Evaluation of Foam Asphalt Technology for Road Bases Construction in the Gulf.

Al-Abdulwahhab, Hamad I. and MG, Baig Investigation of Sulfur Modified Asphalt Concrete Mixes for Road Construction in the Gulf. In: Investigation of Sulfur Modified Asphalt Concrete Mixes for Road Construction in the Gulf.

Al-Abdul Wahab, H.I Influence of Mw of LDPE and vinyl acetate content of EVA on the rheology of polymer modified asphalt. In: Rheologica Acta, 2005.

Al-Ahmadi, H.M (2006) Self-reported attributes of traffic accident involvement by female teachers working in Saudi Arabia. In: WIT transactions on Built Environment.

Al-Ahmadi, H.M (2007) Development of intercity work mode choice model for Saudi Arabia. In: WIT Transaction on Built Environment.

Baig, Ghouse (2007) Evaluation of Foamed Asphalt for Road base Stabilization. In: Proceeding of 7th Saudi Engineering Conference,, Dec, 2007., Riyadh, Saudi Arabia..

Baig, Ghouse (2002) Laboratory Comparison Study for the Use of Stone Matrix Asphalt in Hot Weather Climates. In: Proceedings of the First Engineering Conference,, 2002, Aden, Yemen.

Baig, Ghouse (2005) Effect of Anti-Stripping Agents on Asphalt-Aggregate Interactions. In: 40th IUPAC Congress, Innovations in chemistry,, 2005, Beijing, China.

Baig, Ghouse (2004) Chemistry Of Bonding Between Asphalt And Aggregates. In: CHEMINDEX04, Proceedings of the Confrence ChemIndex,, 2004, Manama, Bharain.

Baig, Ghouse (2002) Performance Modification of Saudi-Asphalt Binders Using SABIC Polymers. In: Proceedings of the Sixth Saudi Engineering Conference,, 2002, KFUPM, Dhahran..

Baig, Ghouse (2002) Effect of Compaction Methods on the In-situ Properties of Asphalt Concrete. In: Proceedings of the Sixth Saudi Engineering Conference,, Nov, 2002, KFUPM, Dhahran, Saudi Arabia..

Baig, Ghouse Investigation of Sulfur modified asphalt mixes for road construction in the Gulf region. In: 4th International Gulf Conference on Roads., Doha, Qatar.. (Submitted)

Baig, Ghouse (2008) Evaluation of Foam Asphalt Technology for roads construction in the Gulf. In: 4th International Gulf Conference on Roads, Nov, 2008, Doha, Qatar. (Submitted)

Baig, Ghouse (2007) Evaluation of Sulfur-Asphalt Technology for Local Applications. In: 7th Saudi Engineering Conference,, Dec, 2007., Riyadh.

Baig, Ghouse (2006) Comparative Study of EE2 and Polybilt Modified Asphalt Concrete. In: Third International Gulf Conference on Roads,, Oct, 2006., Muscat, Oman.

Thesis

l Fatigue and Rutting Performance of Hybrid Recycled Plastic Asphalt Concrete. PhD thesis, King Fahd University of Petroleum and Minerals.

l EVALUATION OF WASTE ENGINE AND COOKING OIL FOR ASPHALT CONCRETE RECYCLING. Masters thesis, King Fahd University of Petroleum and Minerals.

l APPLICATION OF DYNAMIC LANE GROUPING AND ARTIFICIAL INTELLIGENCE TECHNIQUES IN PREDICTING THE OPTIMUM LANE GROUPS AT ISOLATED SIGNALIZED INTERSECTIONS. PhD thesis, King Fahd University of Petroleum and Minerals.

l Compressed sensing based image denoising: novel patch-based collaborative algorithms. Masters thesis, King Fahd University of Petroleum and Minerals.

l ASSESSMENT OF DYNAMIC LANE GROUPING FOR ISOLATED SIGNALIZED INTERSECTION AND APPLICATION OF MACHINE LEARNING MODELS. Masters thesis, King Fahd University of Petroleum and Minerals.

l Eco-friendly Modification of Gulf Asphalt by using Recycled Plastic Waste. Masters thesis, King Fahd University of Petroleum and Minerals.

l CALIBRATION AND VALIDATION OF PARAMICS MICROSCOPIC SIMULATION MODEL FOR LOCAL TRAFFIC CONDITION IN SAUDI ARABIA. Masters thesis, King Fahd University of Petroleum and Minerals.

l The Effectiveness of Applying Dynamic Lane Assignment at All Approaches of Signalized Intersection. Masters thesis, King Fahd University of Petroleum and Minerals.

l APPLICATION OF NEURAL NETWORK FOR MODE CHOICE MODELING AND MODAL TRAFFIC FORECASTING. PhD thesis, King Fahd University of Petroleum and Minerals.

l Elastic Recovery Evaluation of Saudi Asphalt Modified with Commercial Polymers. Masters thesis, King Fahd University of Petroleum and Minerals.

l EVALUATION OF SULFUR MODIFIED EMULSIFIED ASPHALT FOR ROAD CONSTRUCTION. Masters thesis, King Fahd University of Petroleum and Minerals.

l CHARACTERISTICS OF YOUNG DRIVERS INVOLVED IN THE ROAD ACCIDENTS IN DAMMAM METROPOLITAN AREA. Masters thesis, King Fahd University of Petroleum and Minerals.

l The Effect of Local Schools Traffic on Congestion of Urban Network. Masters thesis, King Fahd University of Petroleum and Minerals.

l EVALUATION OF VARIABLE MESSAGE SIGNS IMPACT ON CONGESTED STREETS. PhD thesis, King Fahd University of Petroleum and Minerals.

l THE CHARACTERISTICS OF EXPATRIATE CHAUFFEURS AND EVALUATION OF DRIVING SCHOOLS IN SAUDI ARABIA. Masters thesis, King Fahd University of Petroleum and Minerals.

KATTAN, HISHAM A. (2010) PERFORMANCE MODELING OF SAUDI ARAMCO ROADS NETWORK. Masters thesis, King Fahd University of Petroleum and Minerals.

Rahman, S. M. (2010) APPLICATION OF ARTIFICIAL INTELLIGENCE MODELS IN TRAFFIC FLOW PREDICTION AND TIME-OF-DAY BREAKPOINTS DETERMINATION. PhD thesis, King Fahd University of Petroleum and Minerals.

Al-Khaldi, Hamad Thawab (1982) Drivers' attitudes and their relationship to accident involvement in Saudi Arabia. Masters thesis, KFUPM.

Al-Madani, Hashem Mohammad Noor (1986) Assessment of road user charges in Saudi Arabia. Masters thesis, KFUPM.

Javed, Hasnain (1988) Effect of degree of saturation, air voids and medium of attack on the durability of asphalt concrete mixes in Jeddah. Masters thesis, KFUPM.

Asi, Ibrahim Muhammad (1986) Axle loads and pavement performance indicators for typical highways in Eastern Province. Masters thesis, KFUPM.

Basha, Syed Anwar (2002) Characteristic study of catastrophic tire failure in Eastern Province of Saudi Arabia. Masters thesis, KFUPM.

Ansari, Nasir Husain (1985) Development of an effective patrol dispatching system for traffic police operations. Masters thesis, KFUPM.

Shah, Syed Mansoor (1987) Development of left-turn lane warrants for Saudi Arabia. Masters thesis, KFUPM.

Al-Shaikh, Abdul-Karim Mahmoud (1989) Effect of using geotextiles on behavior of Sabkaha subgrades. Masters thesis, KFUPM.

Mallick, Sayeedur Rahman (1985) Effect of vehicle dimensional characteristics on highway geometric design. Masters thesis, KFUPM.

Ratrout, Ndhal Taisir (1985) Estimating the parking demand for mosques. Masters thesis, KFUPM.

Abu Olba, Maen Abdellatif (2007) Evaluating adequacy of traffic optimization models under local traffic conditions. Masters thesis, KFUPM.

Al-Amri, Ghazi Mohammed A. (1990) Laboratory evaluation of reclaimed rubber-asphaltic concrete mixes. Masters thesis, KFUPM.

Al-Halhouli, Abdul-Halim Ali (1986) Evaluation of emulsified asphalt treated sand for road bases. Masters thesis, KFUPM.

Bagampadde, Umaru (1997) Optimization of steel slag aggregates for bituminous mixes in Saudi Arabia. Masters thesis, KFUPM.

Nagi, Gamil Abdulrub (1988) Evaluation of slurry seal performance in the Eastern Province of Saudi Arabia. Masters thesis, KFUPM.

Al-Barrak, Saleh A. (1982) Improving water resistance of asphalt concrete in Saudi Arabia. Masters thesis, KFUPM.

Khan, Ziauddin Ahmad (1988) Laboratory evaluation of local asphalt concrete mix design procedures. Masters thesis, KFUPM.

Sabir, Syed Mohammad (1989) Road traffic noise in developing countries. Masters thesis, KFUPM.

Qayyum, Tanvir Iqbal (1983) Validity and use of traffic conflict technique : a study in the Kingdom of Saudi Arabia. Masters thesis, KFUPM.

Parvez, Saleem (1997) A Study on the development of vehicular loding for design of highway bridges in Saudi Arabia. Masters thesis, KFUPM.

Ahmed, Syed Anees (2005) Calibration of VISSIM to the traffic conditions of Khobar and Dammam, Saudi Arabia. Masters thesis, KFUPM.

Abdy, Zeeshan Raza (2003) Causes of female teacher work trip accidents in the Kingdom of Saudi Arabia. Masters thesis, KFUPM.

Akhtar, Mohammad Jasim (1987) Development of guidelines for four phase traffic signal scheme in the Kingdom of Saudi Arabia. Masters thesis, KFUPM.

Afroz, Syed Mohiuddin (1995) Effect of captive riders in intercity mode-choice modeling. Masters thesis, KFUPM.

Baig, Mirza Ghouse (1995) Laboratory evaluation of hedmanite and lime modified asphalt concrete mixes. Masters thesis, KFUPM.

Al-Abdulgader, Khaled Abdulaziz Ahmad (1987) Effect of sight distance on the safety of unsignalized intersections. Masters thesis, KFUPM.

Al-Abdul-Gader, Abdullah Hamad (1988) Parking problem of Arafat. Masters thesis, KFUPM.

Mahmoud, Isam Abaker (2002) Performance modification of Saudi-asphalt binders using SABIC polymers. Masters thesis, KFUPM.

Al-Kilani, Abdul-Rahman Mustafa (1989) Pedestrian behavior related to accident involvement. Masters thesis, KFUPM.

Sadiq, Rehan (1997) Performance evaluation of slow sand filters: a probabilistic approach. Masters thesis, KFUPM.

Iyaz, Shoukat (1997) Validation and improvement of rear-end traffic conflict model for safety evaluation of coordinated signal systems. Masters thesis, KFUPM.

Abdul-Rahman, Kefah Muhammad (1985) Recycling of deteriorated asphalt pavements. Masters thesis, KFUPM.

Siddiqui, Fayyaz ahmed. (1997) Relationship between the noncompliance behavior at signalized intersection an driver characteristics. Masters thesis, KFUPM.

Abu Sheikh, Abdel-Malek Ibrahim Mohammad. (1997) Developing behavioral models for driver gap acceptance at priority intersections. PhD thesis, KFUPM.

Ramadhan, Rezqallah Hasan Fayyadh. (1997) Modeling of pavement condition and maintenance priority ranking for road networks. PhD thesis, KFUPM.

Asi, Ibrahim Mohammed Khalil (1996) Performance modeling of Arabian asphalt using HP-GPC chromatography. PhD thesis, KFUPM.

Al-Dubabe, Ibrahim Ahmed Suliman (1996) Polymer modification of Arab Asphalt to Suit Gulf Countries' performance requirements. PhD thesis, KFUPM.

This list was generated on Thu Dec 14 23:48:55 2017 AST.