KFUPM ePrints

Items where Subject is "Civil Engineering > Structural Engineering"

Up a level
Export as [feed] RSS 2.0 [feed] RSS 1.0 [feed] Atom
Group by: Creators | Item Type
Number of items at this level: 477.

Article

UNSPECIFIED Effect of environmental conditions on the properties of fresh and hardened concrete. Effect of environmental conditions on the properties of fresh and hardened concrete.

UNSPECIFIED Experimental service life prediction of rebar corroded R.C. structure. Experimental service life prediction of rebar corroded R.C. structure.

AA, Almusallam Dynamic response of circular cylinders in cross-flow. Dynamic response of circular cylinders in cross-flow.

AA, Almusallam Dynamics of flexible-link and flexible-joint manipulator carrying a payload with rotary inertia. Dynamics of flexible-link and flexible-joint manipulator carrying a payload with rotary inertia.

AA, Almusallam Effect of coarse aggregate quality on the mechanical properties of high strength concrete. Effect of coarse aggregate quality on the mechanical properties of high strength concrete.

AA, Almusallam Effect of degree of corrosion on the properties of reinforcing steel bars. Effect of degree of corrosion on the properties of reinforcing steel bars.

AA, Almusallam Effect of mix proportions on plastic shrinkage cracking of concrete in hot environments. Effect of mix proportions on plastic shrinkage cracking of concrete in hot environments.

AA, Almusallam Effect of reinforcement corrosion on bond strength. Effect of reinforcement corrosion on bond strength.

AA, Almusallam Effect of reinforcement corrosion on flexural behavior of concrete slabs. Effect of reinforcement corrosion on flexural behavior of concrete slabs.

AA, Almusallam Effect of silica fume on the mechanical properties of low quality coarse aggregate concrete. Effect of silica fume on the mechanical properties of low quality coarse aggregate concrete.

AA, Almusallam Effectiveness of concrete surface treatment materials in reducing chloride-induced reinforcement corrosion. Effectiveness of concrete surface treatment materials in reducing chloride-induced reinforcement corrosion.

AA, Almusallam Effectiveness of concrete surface treatment materials in reducing chloride-induced reinforcement corrosion. Effectiveness of concrete surface treatment materials in reducing chloride-induced reinforcement corrosion.

AA, Almusallam Effectiveness of corrosion inhibitors in contaminated concrete. Effectiveness of corrosion inhibitors in contaminated concrete.

AA, Almusallam Effectiveness of surface coatings in improving concrete durability. Effectiveness of surface coatings in improving concrete durability.

AA, Almusallam Evaluation of repair materials for functional improvement of slabs and beams with corroded reinforcement. Evaluation of repair materials for functional improvement of slabs and beams with corroded reinforcement.

AA, Almusallam Performance of concrete coatings under varying exposure conditions. Performance of concrete coatings under varying exposure conditions.

AA, Almusallam Plastic shrinkage cracking of concrete in hot-arid environments. Plastic shrinkage cracking of concrete in hot-arid environments.

AA, Almusallam Three-dimensional Mohr's circle for shear stress components. Three-dimensional Mohr's circle for shear stress components.

AA, Almusallam Three-dimensional graphical method for shear strain analysis. Three-dimensional graphical method for shear strain analysis.

AL-AMOUDI, OMAR Attack on plain and blended cements exposed to aggressive sulfate environments. Attack on plain and blended cements exposed to aggressive sulfate environments.

AL-AMOUDI, OMAR Carbonation and chloride-induced corrosion of reinforcement in fly ash concretes. Carbonation and chloride-induced corrosion of reinforcement in fly ash concretes.

AL-AMOUDI, OMAR Characteristics of silica fume and its impacts on concrete in the Arabian Gulf. Characteristics of silica fume and its impacts on concrete in the Arabian Gulf.

AL-AMOUDI, OMAR Concrete mixture design for hot weather: Experimental and statistical analyses. Concrete mixture design for hot weather: Experimental and statistical analyses.

AL-AMOUDI, OMAR Corrosion resistance and bond strength of epoxy-coated steel bars. Corrosion resistance and bond strength of epoxy-coated steel bars.

AL-AMOUDI, OMAR Durability of plain and blended cements in marine environments. Durability of plain and blended cements in marine environments.

AL-AMOUDI, OMAR Durability of reinforced concrete in aggressive sabkha environments. Durability of reinforced concrete in aggressive sabkha environments.

AL-AMOUDI, OMAR Effect of Thermal Variations on Bond Strength of Fusion-Bonded Epoxy-Coated Bars. Effect of Thermal Variations on Bond Strength of Fusion-Bonded Epoxy-Coated Bars.

AL-AMOUDI, OMAR Effect of chloride and sulfate ions on reinforcement corrosion. Effect of chloride and sulfate ions on reinforcement corrosion.

AL-AMOUDI, OMAR Effect of holidays and surface damage to FBEC on reinforcement corrosion. Effect of holidays and surface damage to FBEC on reinforcement corrosion.

AL-AMOUDI, OMAR Effect of magnesium sulfate and sodium sulfate on the durability performance of plain and blended cements. Effect of magnesium sulfate and sodium sulfate on the durability performance of plain and blended cements.

AL-AMOUDI, OMAR Effect of silica fume on the mechanical properties of low quality coarse aggregate concrete. Effect of silica fume on the mechanical properties of low quality coarse aggregate concrete.

AL-AMOUDI, OMAR Effect of superplasticizer on plastic shrinkage of plain and silica fume cement concretes. Effect of superplasticizer on plastic shrinkage of plain and silica fume cement concretes.

AL-AMOUDI, OMAR Effect of superplasticizer on plastic shrinkage of plain and silica fume cement concretes. Effect of superplasticizer on plastic shrinkage of plain and silica fume cement concretes.

AL-AMOUDI, OMAR Effect of type and dosage of silica fume on plastic shrinkage in concrete exposed to hot weather. Effect of type and dosage of silica fume on plastic shrinkage in concrete exposed to hot weather.

AL-AMOUDI, OMAR Effectiveness of corrosion inhibitors in contaminated concrete. Effectiveness of corrosion inhibitors in contaminated concrete.

AL-AMOUDI, OMAR Effectiveness of surface coatings in improving concrete durability. Effectiveness of surface coatings in improving concrete durability.

AL-AMOUDI, OMAR Electrochemical behaviour of steel in plain and blended cement concretes in sulphate and/or chloride environments. Electrochemical behaviour of steel in plain and blended cement concretes in sulphate and/or chloride environments.

AL-AMOUDI, OMAR Elemental analysis of concrete samples using an accelerator-based PGNAA setu. Elemental analysis of concrete samples using an accelerator-based PGNAA setu.

AL-AMOUDI, OMAR Elemental analysis of concrete samples using an accelerator-based PGNAA setup. Elemental analysis of concrete samples using an accelerator-based PGNAA setup.

AL-AMOUDI, OMAR Influence of sulfate ions on chloride-induced reinforcement corrosion in portland and blended cement concretes. Influence of sulfate ions on chloride-induced reinforcement corrosion in portland and blended cement concretes.

AL-AMOUDI, OMAR Interferences in Prompt خ ³ Analysis of corrosive contaminants in concrete. Interferences in Prompt خ ³ Analysis of corrosive contaminants in concrete.

AL-AMOUDI, OMAR Long-term performance of fusion-bonded epoxy-coated steel bars in chloride-contaminated concrete. Long-term performance of fusion-bonded epoxy-coated steel bars in chloride-contaminated concrete.

AL-AMOUDI, OMAR Long-term performance of fusion-bonded epoxy-coated steel bars in chloride-contaminated concrete. Long-term performance of fusion-bonded epoxy-coated steel bars in chloride-contaminated concrete.

AL-AMOUDI, OMAR Magnesium-sodium sulfate attack in plain and blended cements. Magnesium-sodium sulfate attack in plain and blended cements.

AL-AMOUDI, OMAR Measurement of lime/silica ratio in concrete using PGNAA technique. Measurement of lime/silica ratio in concrete using PGNAA technique.

AL-AMOUDI, OMAR Performance and Correlation of the Properties of Fly Ash Cement Concrete. Performance and Correlation of the Properties of Fly Ash Cement Concrete.

AL-AMOUDI, OMAR Performance of 15 reinforced concrete mixtures in magnesium-sodium sulphate environments. Performance of 15 reinforced concrete mixtures in magnesium-sodium sulphate environments.

AL-AMOUDI, OMAR Plastic shrinkage cracking of concrete in hot-arid environments. Plastic shrinkage cracking of concrete in hot-arid environments.

AL-AMOUDI, OMAR Prompt gamma analysis of chlorine in concrete for corrosion study. Prompt gamma analysis of chlorine in concrete for corrosion study.

AL-AMOUDI, OMAR Role of chloride ions on expansion and strength reduction in plain and blended cements in sulfate environments. Role of chloride ions on expansion and strength reduction in plain and blended cements in sulfate environments.

AL-AMOUDI, OMAR Sulfate Attack and Reinforcement Corrosion in Plain and Blended Cements Exposed to Sulfate Environments. Sulfate Attack and Reinforcement Corrosion in Plain and Blended Cements Exposed to Sulfate Environments.

Ahmad, Shamsad Assessment of service lives of R.C. structures subjected to chloride-induced rebar corrosion. Assessment of service lives of R.C. structures subjected to chloride-induced rebar corrosion.

Ahmad, Shamsad Chloride penetration into silica fume concrete subject to different exposures. Chloride penetration into silica fume concrete subject to different exposures.

Ahmad, Shamsad Compliance criteria for quality concrete. Compliance criteria for quality concrete.

Ahmad, Shamsad Correlation between strength and durability indices of plain and blended cement concretes. Correlation between strength and durability indices of plain and blended cement concretes. (Submitted)

Ahmad, Shamsad Correlations between depth of water penetration, chloride permeability, and coefficient of chloride diffusion in plain, silica fume, and fly ash cement concretes. Correlations between depth of water penetration, chloride permeability, and coefficient of chloride diffusion in plain, silica fume, and fly ash cement concretes.

Ahmad, Shamsad Design procedures for cathodic protection systems for R.C.C. members. Design procedures for cathodic protection systems for R.C.C. members.

Ahmad, Shamsad Empirical modelling of indicators of chloride-induced rebar corrosion. Empirical modelling of indicators of chloride-induced rebar corrosion.

Ahmad, Shamsad Optimum concrete mixture design using locally available ingredients. Optimum concrete mixture design using locally available ingredients.

Ahmad, Shamsad Reinforcement corrosion in concrete structures, its monitoring and service life prediction - A review. Reinforcement corrosion in concrete structures, its monitoring and service life prediction - A review.

Ahmad, Shamsad Residual strength of corrosion-damaged reinforced concrete beams. Residual strength of corrosion-damaged reinforced concrete beams.

Ahmad, Shamsad A simple arrangement and procedure for in-situ measurement of corrosion rate of rebar embedded in concrete. A simple arrangement and procedure for in-situ measurement of corrosion rate of rebar embedded in concrete.

Ahmad, Shamsad A study of self-compacting concrete made with marginal aggregates. A study of self-compacting concrete made with marginal aggregates. (In Press)

Ahmad, Shamsad A study of the relationship between permeability and tortuosity of concrete. A study of the relationship between permeability and tortuosity of concrete. (Submitted)

Al-Dulaijan, S. U. 29Si MAS-NMR hydration and compressive strength study in cement paste. 29Si MAS-NMR hydration and compressive strength study in cement paste.

Al-Dulaijan, S. U. 29Si MAS-NMR study of hydrated cement paste and mortar made with and without silica fume. 29Si MAS-NMR study of hydrated cement paste and mortar made with and without silica fume.

Al-Dulaijan, S. U. 29Si MAS-NMR study of hydrated cement paste and mortar with varying content of fly ash. 29Si MAS-NMR study of hydrated cement paste and mortar with varying content of fly ash.

Al-Dulaijan, S. U. 29Si magic-angle-spinning nuclear magnetic resonance study of hydrated cement paste and mortar. 29Si magic-angle-spinning nuclear magnetic resonance study of hydrated cement paste and mortar.

Al-Dulaijan, S. U. Contractor financing, public works in Saudi Arabia. Contractor financing, public works in Saudi Arabia.

Al-Dulaijan, S. U. Effect of Cyclic Loading on Bond Behavior of GFRP Rods Embedded in Concrete Beams. Effect of Cyclic Loading on Bond Behavior of GFRP Rods Embedded in Concrete Beams.

Al-Dulaijan, S. U. Effect of environmental pre-conditioning on bond of FRP reinforcement to concrete. Effect of environmental pre-conditioning on bond of FRP reinforcement to concrete.

Al-Dulaijan, S. U. Effect of inhibitor treatment on corrosion of steel in a salt solution. Effect of inhibitor treatment on corrosion of steel in a salt solution.

Al-Dulaijan, S. U. Effect of rebar cleanliness and repair materials on reinforcement corrosion and flexural strength of repaired concrete beams. Effect of rebar cleanliness and repair materials on reinforcement corrosion and flexural strength of repaired concrete beams.

Al-Dulaijan, S. U. Effect of steel manufacturing process and atmospheric corrosion on the corrosion-resistance of steel bars in concrete. Effect of steel manufacturing process and atmospheric corrosion on the corrosion-resistance of steel bars in concrete.

Al-Dulaijan, S. U. Effect of waterproofing coatings on steel reinforcement corrosion and physical properties of concrete. Effect of waterproofing coatings on steel reinforcement corrosion and physical properties of concrete.

Al-Dulaijan, S. U. Evaluation of bond using FRP rods with axisymmetric deformations. Evaluation of bond using FRP rods with axisymmetric deformations.

Al-Dulaijan, S. U. Mechanical properties and durability characteristics of polymer- and cement-based repair materials. Mechanical properties and durability characteristics of polymer- and cement-based repair materials.

Al-Dulaijan, S. U. Performance of plain and blended cements exposed to high sulphate concentrations. Performance of plain and blended cements exposed to high sulphate concentrations.

Al-Dulaijan, S. U. Sulfate resistance of plain and blended cements exposed to magnesium sulfate solutions. Sulfate resistance of plain and blended cements exposed to magnesium sulfate solutions.

Al-Dulaijan, S. U. Sulfate resistance of plain and blended cements exposed to varying concentrations of sodium sulfate. Sulfate resistance of plain and blended cements exposed to varying concentrations of sodium sulfate.

Al-Dulaijan, S. U. and Maslehuddin, M. and M. Al-Zahrani, M. and Sharif, A. M. and Alidi, S. H. and Al-Mehthel, M. H. EFFECT OF AGGREGATE QUALITY ON THE PROPERTIES OF CONCRETE. The 6th Saudi Engineering Conference, KFUPM, Dhahran, December 2002.

Al-Gadhib, A.H. and Baluch, M.H. and Rahman, M.K. REPAIR AND RETROFITTING OF DETERIORATED REINFORCED CONCRETE STRUCTURES – THREE CASE STUDIES. The 6th Saudi Engineering Conference, KFUPM, Dhahran, December 2002.

Al-Gahtani, A.S. and Maslehuddin, M. CHARACTERISTICS OF THE ARABIAN GULF ENVIRONMENT AND ITS IMPACT ON CONCRETE DURABILITY – AN OVERVIEW. The 6th Saudi Engineering Conference, KFUPM, Dhahran, December 2002.

Al-Ghamedy, Hamdan Analysis and design of pipeline stiffened-anchor plate/flange. Analysis and design of pipeline stiffened-anchor plate/flange.

Al-Ghamedy, Hamdan Energy-momentum conserving algorithm for nonlinear dynamics of laminated shells based on a third-order shear deformation theory. Energy-momentum conserving algorithm for nonlinear dynamics of laminated shells based on a third-order shear deformation theory.

Al-Ghamedy, Hamdan Finite element formulation of a third order laminated finite rotation shell element. Finite element formulation of a third order laminated finite rotation shell element.

Al-Ghamedy, Hamdan Layered nonhomogeneous curved beam elements for inelastic analysis. Layered nonhomogeneous curved beam elements for inelastic analysis.

Al-Ghamedy, Hamdan Mixed hardening, three-invariants dependent cap model. Mixed hardening, three-invariants dependent cap model.

Al-Ghamedy, Hamdan Stability of vertically bent pipelines buried in sand. Stability of vertically bent pipelines buried in sand.

Al-Ghamedy, Hamdan Third order shear deformation model for laminated shells with finite rotations: Formulation and consistent linearization. Third order shear deformation model for laminated shells with finite rotations: Formulation and consistent linearization.

Al-Ghamedy, Hamdan concrete plasticity model with elliptic failure surface and independent hardening/softening. concrete plasticity model with elliptic failure surface and independent hardening/softening.

Al-Mandil, Mustafa Assessment of damage to concrete girder-slab bridges in Saudi Arabia. Assessment of damage to concrete girder-slab bridges in Saudi Arabia.

Al-Mandil, Mustafa Categorization of damage to concrete bridge decks in Saudi Arabia. Categorization of damage to concrete bridge decks in Saudi Arabia.

Al-Mandil, Mustafa Loss of punching capacity of bridge deck slabs from crack damage. Loss of punching capacity of bridge deck slabs from crack damage.

Al-Mandil, Mustafa Performance of epoxy-repaired concrete under thermal cycling. Performance of epoxy-repaired concrete under thermal cycling.

Al-Tayyib, Abdulhamid CORROSION OF STEEL REINFORCEMENT IN SULFUR CONCRETE. CORROSION OF STEEL REINFORCEMENT IN SULFUR CONCRETE.

Al-Tayyib, Abdulhamid CORROSION RATE MEASUREMENTS OF REINFORCING STEEL IN CONCRETE BY ELECTROCHEMICAL TECHNIQUES. CORROSION RATE MEASUREMENTS OF REINFORCING STEEL IN CONCRETE BY ELECTROCHEMICAL TECHNIQUES..

Al-Tayyib, Abdulhamid Corrosion behavior of pre-rusted rebars after placement in concrete. Corrosion behavior of pre-rusted rebars after placement in concrete.

Al-Tayyib, Abdulhamid Corrosion of steel reinforcement in polypropylene fiber reinforced concrete structures. Corrosion of steel reinforcement in polypropylene fiber reinforced concrete structures.

Al-Tayyib, Abdulhamid Development of calcium silicate thermal insulator in Saudi Arabia. Development of calcium silicate thermal insulator in Saudi Arabia.

Al-Tayyib, Abdulhamid EFFECT OF FILLER TYPE ON THE DURABILITY OF SULFUR-SAND COMPOSITES IN THE ARABIAN GULF COUNTRIES. EFFECT OF FILLER TYPE ON THE DURABILITY OF SULFUR-SAND COMPOSITES IN THE ARABIAN GULF COUNTRIES..

Al-Tayyib, Abdulhamid EFFECT OF HOT CLIMATE ON SHEAR STRENGTH OF CONCRETE. EFFECT OF HOT CLIMATE ON SHEAR STRENGTH OF CONCRETE.

Al-Tayyib, Abdulhamid EFFECT OF HOT WEATHER ON MODULUS OF RUPTURE AND SPLITTING TENSILE STRENGTH OF CONCRETE. EFFECT OF HOT WEATHER ON MODULUS OF RUPTURE AND SPLITTING TENSILE STRENGTH OF CONCRETE..

Al-Tayyib, Abdulhamid EFFECT OF POLYPROPYLENE FIBER REINFORCEMENT ON THE PROPERTIES OF FRESH AND HARDENED CONCRETE IN THE ARABIAN GULF ENVIRONMENT. EFFECT OF POLYPROPYLENE FIBER REINFORCEMENT ON THE PROPERTIES OF FRESH AND HARDENED CONCRETE IN THE ARABIAN GULF ENVIRONMENT..

Al-Tayyib, Abdulhamid EVALUATION OF DEGREE OF HYDRATION IN CONCRETE USING **2**9Si MAGIC ANGLE SPINNING NMR IN SOLIDS. EVALUATION OF DEGREE OF HYDRATION IN CONCRETE USING **2**9Si MAGIC ANGLE SPINNING NMR IN SOLIDS..

Al-Tayyib, Abdulhamid Effect of hot weather on strength of reinforced concrete beams. Effect of hot weather on strength of reinforced concrete beams.

Al-Tayyib, Abdulhamid Effect of sulfate and carbonate ions on reinforcing steel corrosion as evaluated using AC impedance spectroscopy. Effect of sulfate and carbonate ions on reinforcing steel corrosion as evaluated using AC impedance spectroscopy.

Al-Tayyib, Abdulhamid Effect of sulfate ions on the corrosion of rebars embedded in concrete. Effect of sulfate ions on the corrosion of rebars embedded in concrete.

Al-Tayyib, Abdulhamid Effect of thermal cycling on the durability of concrete made from local materials in the Arabian Gulf countries. Effect of thermal cycling on the durability of concrete made from local materials in the Arabian Gulf countries.

Al-Tayyib, Abdulhamid Evaluation of corrosion resistance of reinforcing steel in sulfur concrete. Evaluation of corrosion resistance of reinforcing steel in sulfur concrete.

Al-Tayyib, Abdulhamid LABORATORY STUDY ON THE EFFECT OF SULFATE IONS ON REBAR CORROSION. LABORATORY STUDY ON THE EFFECT OF SULFATE IONS ON REBAR CORROSION..

Al-Tayyib, Abdulhamid Permeability and durability of plain and blended cement concretes cured in field and laboratory conditions. Permeability and durability of plain and blended cement concretes cured in field and laboratory conditions.

Al-Tayyib, Abdulhamid STRESS DISTRIBUTION IN DEEP BEAMS WITH WEB OPENINGS. STRESS DISTRIBUTION IN DEEP BEAMS WITH WEB OPENINGS..

Al-Tayyib, Abdulhamid Si MAS-NMR hydration and compressive strength study in cement paste. Si MAS-NMR hydration and compressive strength study in cement paste.

Al-Tayyib, Abdulhamid Si MAS-NMR study of hydrated cement paste and mortar made with and without silica fume. Si MAS-NMR study of hydrated cement paste and mortar made with and without silica fume.

Al-Tayyib, Abdulhamid Si MAS-NMR study of hydrated cement paste and mortar with varying content of fly ash. Si MAS-NMR study of hydrated cement paste and mortar with varying content of fly ash.

Al-Tayyib, Abdulhamid Si magic-angle-spinning nuclear magnetic resonance study of hydrated cement paste and mortar. Si magic-angle-spinning nuclear magnetic resonance study of hydrated cement paste and mortar.

Al-Tayyib, Abdulhamid Use of polypropylene fibers to enhance deterioration resistance of concrete surface skin subjected to cyclic wet/dry sea water exposure. Use of polypropylene fibers to enhance deterioration resistance of concrete surface skin subjected to cyclic wet/dry sea water exposure.

Al-Zahrani, Dr. Mesfer M. Performance evaluation of slow sand filters using fuzzy rule-based modelling. Performance evaluation of slow sand filters using fuzzy rule-based modelling.

Al-Zahrani, M. M. 29Si MAS-NMR study of hydrated cement paste and mortar made with and without silica fume. 29Si MAS-NMR study of hydrated cement paste and mortar made with and without silica fume.

Al-Zahrani, M. M. EFFECT OF POLYPROPYLENE FIBER REINFORCEMENT ON THE PROPERTIES OF FRESH AND HARDENED CONCRETE IN THE ARABIAN GULF ENVIRONMENT. EFFECT OF POLYPROPYLENE FIBER REINFORCEMENT ON THE PROPERTIES OF FRESH AND HARDENED CONCRETE IN THE ARABIAN GULF ENVIRONMENT..

Al-Zahrani, M. M. Effect of chloride concentration in soil on reinforcement corrosion. Effect of chloride concentration in soil on reinforcement corrosion.

Al-Zahrani, M. M. Effect of waterproofing coatings on steel reinforcement corrosion and physical properties of concrete. Effect of waterproofing coatings on steel reinforcement corrosion and physical properties of concrete.

Al-Zahrani, M. M. Evaluation of bond using FRP rods with axisymmetric deformations. Evaluation of bond using FRP rods with axisymmetric deformations.

Al-Zahrani, M. M. Performance of plain and blended cements exposed to high sulphate concentrations. Performance of plain and blended cements exposed to high sulphate concentrations.

Al-Zahrani, M. M. Use of polypropylene fibers to enhance deterioration resistance of concrete surface skin subjected to cyclic wet/dry sea water exposure. Use of polypropylene fibers to enhance deterioration resistance of concrete surface skin subjected to cyclic wet/dry sea water exposure.

Al-Zahrani, M.M. 29Si MAS-NMR study of hydrated cement paste and mortar with varying content of fly ash. 29Si MAS-NMR study of hydrated cement paste and mortar with varying content of fly ash.

Al-Zahrani, M.M. Corrosion of steel reinforcement in polypropylene fiber reinforced concrete structures. Corrosion of steel reinforcement in polypropylene fiber reinforced concrete structures.

Al-Zahrani, M.M. Effect of Cyclic Loading on Bond Behavior of GFRP Rods Embedded in Concrete Beams. Effect of Cyclic Loading on Bond Behavior of GFRP Rods Embedded in Concrete Beams.

Al-Zahrani, M.M. Effect of environmental pre-conditioning on bond of FRP reinforcement to concrete. Effect of environmental pre-conditioning on bond of FRP reinforcement to concrete.

Al-Zahrani, M.M. Effect of inhibitor treatment on corrosion of steel in a salt solution. Effect of inhibitor treatment on corrosion of steel in a salt solution.

Al-Zahrani, M.M. Effect of rebar cleanliness and repair materials on reinforcement corrosion and flexural strength of repaired concrete beams. Effect of rebar cleanliness and repair materials on reinforcement corrosion and flexural strength of repaired concrete beams.

Al-Zahrani, M.M. Effect of steel manufacturing process and atmospheric corrosion on the corrosion-resistance of steel bars in concrete. Effect of steel manufacturing process and atmospheric corrosion on the corrosion-resistance of steel bars in concrete.

Al-Zahrani, M.M. Geometries and energy separations of electronic states of GeF2, SnF2, and PbF2 and their positive ions. Geometries and energy separations of electronic states of GeF2, SnF2, and PbF2 and their positive ions.

Al-Zahrani, M.M. Inhibition of atmospheric corrosion of mild steel by sodium dihydrogen orthophosphate treatment. Inhibition of atmospheric corrosion of mild steel by sodium dihydrogen orthophosphate treatment.

Al-Zahrani, M.M. Mechanical properties and durability characteristics of polymer- and cement-based repair materials. Mechanical properties and durability characteristics of polymer- and cement-based repair materials.

Al-Zahrani, M.M. Performance of plain and blended cements exposed to varying concentrations of sodium sulphate. Performance of plain and blended cements exposed to varying concentrations of sodium sulphate.

Al-Zahrani, M.M. Sulfate resistance of plain and blended cements exposed to varying concentrations of sodium sulfate. Sulfate resistance of plain and blended cements exposed to varying concentrations of sodium sulfate.

Algadhib, A.H. CDM based finite element code for concrete in 3-D. CDM based finite element code for concrete in 3-D.

Algadhib, A.H. CDM model for residual strength of concrete under cyclic compression. CDM model for residual strength of concrete under cyclic compression.

Algadhib, A.H. Comparative evaluation of plasticity theories against tension-torsion test at finite strain. Comparative evaluation of plasticity theories against tension-torsion test at finite strain.

Algadhib, A.H. Crack minimization model for hot weather concreting. Crack minimization model for hot weather concreting.

Algadhib, A.H. Damage model for monotonic and fatigue response of high strength concrete. Damage model for monotonic and fatigue response of high strength concrete.

Algadhib, A.H. Drying shrinkage stresses in concrete patch repair systems. Drying shrinkage stresses in concrete patch repair systems.

Algadhib, A.H. Modeling of shrinkage and creep stresses in concrete repair. Modeling of shrinkage and creep stresses in concrete repair.

Algadhib, A.H. Predicting residual strength in unsaturated concrete exposed to sulfate attack. Predicting residual strength in unsaturated concrete exposed to sulfate attack.

Algadhib, A.H. Principal direction paths in tension-torsion test at finite strain. Principal direction paths in tension-torsion test at finite strain.

Algadhib, A.H. Risks of cracking and delamination in patch repair. Risks of cracking and delamination in patch repair.

Algadhib, A.H. Simulation of shrinkage distress and creep relief in concrete repair. Simulation of shrinkage distress and creep relief in concrete repair.

Algadhib, A.H. Towards a canonical elastoplastic damage model. Towards a canonical elastoplastic damage model.

Amoudi, Omer Interferences in Prompt خ³ Analysis of corrosive contaminants in concrete. Interferences in Prompt خ³ Analysis of corrosive contaminants in concrete.

Azad, A.K. Analysis of continuous curved girder-slab bridges. Analysis of continuous curved girder-slab bridges.

Azad, A.K. Assessment and repair of distressed kiln piers in a cement manufacturing plant. Assessment and repair of distressed kiln piers in a cement manufacturing plant.

Azad, A.K. Categorization of damage to concrete bridge decks in Saudi Arabia. Categorization of damage to concrete bridge decks in Saudi Arabia.

Azad, A.K. Chloride diffusion coefficient of concrete in the Arabian Gulf environment. Chloride diffusion coefficient of concrete in the Arabian Gulf environment.

Azad, A.K. Combined experimental-numerical approach to characterization of steel-glue-concrete interface. Combined experimental-numerical approach to characterization of steel-glue-concrete interface.

Azad, A.K. Combined experimental-numerical approach to characterization of steel-glue-concrete interface. Combined experimental-numerical approach to characterization of steel-glue-concrete interface.

Azad, A.K. Continuous Steel I-Girders: Optimum Proportioning. Continuous Steel I-Girders: Optimum Proportioning.

Azad, A.K. Corrosion Of Steel Reinforcement In Sulfur Concrete. Corrosion Of Steel Reinforcement In Sulfur Concrete..

Azad, A.K. Determination of the effective chloride diffusion coefficient in concrete via a gas diffusion technique. Determination of the effective chloride diffusion coefficient in concrete via a gas diffusion technique.

Azad, A.K. Economic Design Of Homogeneous I-Beams. Economic Design Of Homogeneous I-Beams.

Azad, A.K. Effect Of Filler Type On The Durability Of Sulfur-Sand Composites In The Arabian Gulf Countries. Effect Of Filler Type On The Durability Of Sulfur-Sand Composites In The Arabian Gulf Countries..

Azad, A.K. Effect of holidays and surface damage to FBEC on reinforcement corrosion. Effect of holidays and surface damage to FBEC on reinforcement corrosion.

Azad, A.K. Flexure Of Statically Indeterminate Cracked Beams. Flexure Of Statically Indeterminate Cracked Beams..

Azad, A.K. Fracture energy of weakly reinforced concrete beams. Fracture energy of weakly reinforced concrete beams.

Azad, A.K. Guidelines toward the design of reinforced concrete beams with external plates. Guidelines Toward The Design Of Reinforced Concrete Beams With External Plates.

Azad, A.K. Influence Of Non-Propagating Cracks On Conservative Buckling Of Columns. Influence Of Non-Propagating Cracks On Conservative Buckling Of Columns..

Azad, A.K. Loss of punching capacity of bridge deck slabs from crack damage. Loss of punching capacity of bridge deck slabs from crack damage.

Azad, A.K. Minimum Weight Design Of Tapered Steel I-Columns. Minimum Weight Design Of Tapered Steel I-Columns..

Azad, A.K. Mode shapes and crack damage in subtangential buckling of columns. Mode shapes and crack damage in subtangential buckling of columns.

Azad, A.K. Modelling of damaged RC beams strengthened by fibre composite plates. Modelling of damaged RC beams strengthened by fibre composite plates.

Azad, A.K. Nonlinear finite element modelling of failure modes in RC slabs. Nonlinear finite element modelling of failure modes in RC slabs.

Azad, A.K. Optimization Of Built-Up Nonuniform Steel I-Beams. Optimization Of Built-Up Nonuniform Steel I-Beams..

Azad, A.K. Optimization Of Laterally Unsupported Unstiffened Steel I-Beams. Optimization Of Laterally Unsupported Unstiffened Steel I-Beams..

Azad, A.K. Optimum design of parabolic steel box arches. Optimum design of parabolic steel box arches.

Azad, A.K. Optimum post-tensioning for three-span continuous slab-type bridge decks. Optimum post-tensioning for three-span continuous slab-type bridge decks.

Azad, A.K. Peeling and diagonal tension failures in steel plated R/C beams. Peeling and diagonal tension failures in steel plated R/C beams.

Azad, A.K. Performance of epoxy-repaired concrete under thermal cycling. Performance of epoxy-repaired concrete under thermal cycling.

Azad, A.K. Punching capacity of deck slabs in girder-slab bridges. Punching capacity of deck slabs in girder-slab bridges.

Azad, A.K. Refined Theory For Isotropic Plates. Refined Theory For Isotropic Plates..

Azad, A.K. Sensitivity study of criteria governing collapse of centrally loaded R/C slabs. Sensitivity study of criteria governing collapse of centrally loaded R/C slabs.

Azad, A.K. Shear strength of plated RC beams. Shear strength of plated RC beams.

Azad, A.K. Stress analysis for thick rectangular plates. Stress analysis for thick rectangular plates.

Azad, A.K. Technical Theory Of Beams With Normal Strain. Technical Theory Of Beams With Normal Strain..

Azad, A.K. Use Of Plasticized Sulphur In Sisal-Fibre Concrete. Use Of Plasticized Sulphur In Sisal-Fibre Concrete..

Azad, A.K. A survey of commercial vehicle weights in Saudi Arabia. A survey of commercial vehicle weights in Saudi Arabia.

Bader, M.A. Influence of cement composition on the corrosion of reinforcement and sulfate resistance of concrete. Influence of cement composition on the corrosion of reinforcement and sulfate resistance of concrete.

Bader, M.A. Performance of corrosion resisting steels in chloride-bearing concrete. Performance of corrosion resisting steels in chloride-bearing concrete.

Bader, M.A. TOWARD SOLVING THE CONCRETE DETERIORATION PROBLEM IN THE GULF REGION. TOWARD SOLVING THE CONCRETE DETERIORATION PROBLEM IN THE GULF REGION..

Baluch, M.H. Analysis Of Continuous Curved Girder-Slab Bridges. Analysis Of Continuous Curved Girder-Slab Bridges.

Baluch, M.H. Analytical Solution Of The Diffusion - Convection Equation Over A Finite Domain. Analytical Solution Of The Diffusion - Convection Equation Over A Finite Domain..

Baluch, M.H. Bending Of Micropolar Plates. Bending Of Micropolar Plates.

Baluch, M.H. Boussinesq Problem Of Plane Micropolar Elasticity. Boussinesq Problem Of Plane Micropolar Elasticity..

Baluch, M.H. Computational Model For Reinforced Concrete Beams Strengthened By Epoxy Bonded Steel Plates. Computational Model For Reinforced Concrete Beams Strengthened By Epoxy Bonded Steel Plates.

Baluch, M.H. Corrosion Of Steel Reinforcement In Sulfur Concrete. Corrosion Of Steel Reinforcement In Sulfur Concrete..

Baluch, M.H. Durability Performance Of Repaired Reinforced Concrete Beams. Durability Performance Of Repaired Reinforced Concrete Beams.

Baluch, M.H. Effect Of Filler Type On The Durability Of Sulfur-Sand Composites In The Arabian Gulf Countries. Effect Of Filler Type On The Durability Of Sulfur-Sand Composites In The Arabian Gulf Countries..

Baluch, M.H. Effect Of Thermal Cycling On The Durability Of Concrete Made From Local Materials In The Arabian Gulf Countries. Effect Of Thermal Cycling On The Durability Of Concrete Made From Local Materials In The Arabian Gulf Countries.

Baluch, M.H. Effects Of Shear And Normal Strain On Plate Bending. Effects Of Shear And Normal Strain On Plate Bending..

Baluch, M.H. Finite Element Approach To Bending Of Micropolar Plates. Finite Element Approach To Bending Of Micropolar Plates..

Baluch, M.H. Flexural Behaviour Of Precracked Reinforced Concrete Beams Strengthened Externally By Steel Plates. Flexural Behaviour Of Precracked Reinforced Concrete Beams Strengthened Externally By Steel Plates.

Baluch, M.H. Flexure Of Statically Indeterminate Cracked Beams. Flexure Of Statically Indeterminate Cracked Beams..

Baluch, M.H. Generalized Theory For Bending Of Thick Plates. Generalized Theory For Bending Of Thick Plates.

Baluch, M.H. Guidelines Toward The Design Of Reinforced Concrete Beams With External Plates. Guidelines Toward The Design Of Reinforced Concrete Beams With External Plates.

Baluch, M.H. Inclusion Of Transverse Normal Strain Effects Into The Finite Element Formulation Of Timoshenko Beams. Inclusion Of Transverse Normal Strain Effects Into The Finite Element Formulation Of Timoshenko Beams..

Baluch, M.H. Influence Functions In The Numerical Analysis Of Bending Of Thin Elastic Plates. Influence Functions In The Numerical Analysis Of Bending Of Thin Elastic Plates..

Baluch, M.H. Influence Of Non-Propagating Cracks On Conservative Buckling Of Columns. Influence Of Non-Propagating Cracks On Conservative Buckling Of Columns..

Baluch, M.H. Long Term Chemical Stability Of Epichlorohydrin/Bisphenol Resin Polymer Concrete. Long Term Chemical Stability Of Epichlorohydrin/Bisphenol Resin Polymer Concrete..

Baluch, M.H. Loss Of Punching Capacity Of Bridge Deck Slabs From Crack Damage. Loss Of Punching Capacity Of Bridge Deck Slabs From Crack Damage.

Baluch, M.H. Method Of Weighted Residuals As Applied To Nonlinear Differential Equations. Method Of Weighted Residuals As Applied To Nonlinear Differential Equations..

Baluch, M.H. Minimum Weight Design Of Tapered Steel I-Columns. Minimum Weight Design Of Tapered Steel I-Columns..

Baluch, M.H. Mix Design, Durability And Creep Characteristics Of Sulphur Infiltrated Concrete. Mix Design, Durability And Creep Characteristics Of Sulphur Infiltrated Concrete..

Baluch, M.H. Mode Shapes And Crack Damage In Subtangential Buckling Of Columns. Mode Shapes And Crack Damage In Subtangential Buckling Of Columns.

Baluch, M.H. Nonlinear Finite Element Modelling Of Failure Modes In RC Slabs. Nonlinear Finite Element Modelling Of Failure Modes In RC Slabs.

Baluch, M.H. On The Use Of Various Shell Theories In The Analysis Of Axisymmetrically Loaded Circular Containers. On The Use Of Various Shell Theories In The Analysis Of Axisymmetrically Loaded Circular Containers..

Baluch, M.H. Parameter Testing Of Epoxy Polymer Concrete. Parameter Testing Of Epoxy Polymer Concrete..

Baluch, M.H. Performance Of Epoxy-Repaired Concrete Under Thermal Cycling. Performance Of Epoxy-Repaired Concrete Under Thermal Cycling.

Baluch, M.H. Punching Capacity Of Deck Slabs In Girder-Slab Bridges. Punching Capacity Of Deck Slabs In Girder-Slab Bridges.

Baluch, M.H. Refined Theory For Flexural Motions Of Isotropic Elastic Plates. Refined Theory For Flexural Motions Of Isotropic Elastic Plates..

Baluch, M.H. Refined Theory For Isotropic Plates. Refined Theory For Isotropic Plates..

Baluch, M.H. Repaired Reinforced Concrete Beams. Repaired Reinforced Concrete Beams.

Baluch, M.H. Sensitivity Study Of Criteria Governing Collapse Of Centrally Loaded R/C Slabs. Sensitivity Study Of Criteria Governing Collapse Of Centrally Loaded R/C Slabs.

Baluch, M.H. Strengthening Of Initially Loaded Reinforced Concrete Beams Using FRP Plates. Strengthening Of Initially Loaded Reinforced Concrete Beams Using FRP Plates.

Baluch, M.H. Stress Analysis For Thick Rectangular Plates. Stress Analysis For Thick Rectangular Plates.

Baluch, M.H. Technical Theory Of Beams With Normal Strain. Technical Theory Of Beams With Normal Strain..

Baluch, M.H. Thick-Walled Micropolar Cylinder In A State Of Plane Strain. Thick-Walled Micropolar Cylinder In A State Of Plane Strain..

Baluch, M.H. Towards A Canonical Elastoplastic Damage Model. Towards A Canonical Elastoplastic Damage Model.

Baluch, M.H. Use Of Plasticized Sulphur In Sisal-Fibre Concrete. Use Of Plasticized Sulphur In Sisal-Fibre Concrete..

Khathlan, Abdul-Rahman ANALYSIS OF LARGE OPENINGS IN CYLINDRICAL VESSELS INCLUDING NOZZLE FLEXIBILITY. ANALYSIS OF LARGE OPENINGS IN CYLINDRICAL VESSELS INCLUDING NOZZLE FLEXIBILITY..

Khathlan, Abdul-Rahman Nonaxisymmetric unbonded contact of plates on tensionless Winkler foundations. Nonaxisymmetric unbonded contact of plates on tensionless Winkler foundations.

Khathlan, Abdulrahman Large deformation analysis of plates on unilateral elastic foundation. Large deformation analysis of plates on unilateral elastic foundation.

M, Maslehuddin and OSB, Al-Amoudi Usage of Cement Kiln Dust in Cement Products – Research Review and Preliminary. Usage of Cement Kiln Dust in Cement Products – Research Review and Preliminary.

M. Sharif, Dr. Alfarabi Categorization of damage to concrete bridge decks in Saudi Arabia. Categorization of damage to concrete bridge decks in Saudi Arabia.

M. Sharif, Dr. Alfarabi Chloride diffusion coefficient of concrete in the Arabian Gulf environment. Chloride diffusion coefficient of concrete in the Arabian Gulf environment.

M. Sharif, Dr. Alfarabi Combined experimental-numerical approach to characterization of steel-glue-concrete interface. Combined experimental-numerical approach to characterization of steel-glue-concrete interface.

M. Sharif, Dr. Alfarabi Confirmation of TICC damage hypothesis. Petrographic study. Confirmation of TICC damage hypothesis. Petrographic study.

M. Sharif, Dr. Alfarabi Creep loss variation in prestressed concrete beams. Creep loss variation in prestressed concrete beams.

M. Sharif, Dr. Alfarabi Determination of the effective chloride diffusion coefficient in concrete via a gas diffusion technique. Determination of the effective chloride diffusion coefficient in concrete via a gas diffusion technique.

M. Sharif, Dr. Alfarabi Effect of thermal cycling on the durability of concrete made from local materials in the Arabian Gulf countries. Effect of thermal cycling on the durability of concrete made from local materials in the Arabian Gulf countries.

M. Sharif, Dr. Alfarabi Flexural behaviour of precracked reinforced concrete beams strengthened externally by steel plates. Flexural behaviour of precracked reinforced concrete beams strengthened externally by steel plates.

M. Sharif, Dr. Alfarabi Guidelines toward the design of reinforced concrete beams with external plates. Guidelines toward the design of reinforced concrete beams with external plates.

M. Sharif, Dr. Alfarabi Loss of punching capacity of bridge deck slabs from crack damage. Loss of punching capacity of bridge deck slabs from crack damage.

M. Sharif, Dr. Alfarabi Modelling of damaged RC beams strengthened by fibre composite plates. Modelling of damaged RC beams strengthened by fibre composite plates.

M. Sharif, Dr. Alfarabi Partially Prestressed Composite Beams. II. Partially Prestressed Composite Beams. II.

M. Sharif, Dr. Alfarabi Partially Prestressed Continuous Composite Beams.I. Partially Prestressed Continuous Composite Beams.I..

M. Sharif, Dr. Alfarabi Shear repair for reinforced concrete by fiberglass plate bonding. Shear repair for reinforced concrete by fiberglass plate bonding.

M. Sharif, Dr. Alfarabi Shear strength of plated RC beams. Shear strength of plated RC beams.

M. Sharif, Dr. Alfarabi Strengthening of initially loaded reinforced concrete beams using FRP plates. Strengthening of initially loaded reinforced concrete beams using FRP plates.

M. Sharif, Dr. Alfarabi Strengthening of shear-damaged RC beams by external bonding of steel plates. Strengthening of shear-damaged RC beams by external bonding of steel plates.

M. Sharif, Dr. Alfarabi Time-dependent losses in prestressed, continuous composite beams. Time-dependent losses in prestressed, continuous composite beams.

Mesfer, Dr. M. Al-Zahrani Biology of Phlebotomus sandflies (Diptera: Psychodidae) in two contrasting leishmaniasis foci of south-west Saudi Arabia. Biology of Phlebotomus sandflies (Diptera: Psychodidae) in two contrasting leishmaniasis foci of south-west Saudi Arabia.

Mesfer, Dr. M. Al-Zahrani Optimizing water quality monitoring stations using genetic algorithms. Optimizing water quality monitoring stations using genetic algorithms.

Mesfer, Dr. M. Al-Zahrani Secondary effluent treatment by slow sand filters: Performance and risk analysis. Secondary effluent treatment by slow sand filters: Performance and risk analysis.

Mesfer, Dr. M. Al-Zahrani Spatiotemporal stochastic open-channel flow. I: Model and its parameter data. Spatiotemporal stochastic open-channel flow. I: Model and its parameter data.

Mesfer, Dr. M. Al-Zahrani Spatiotemporal stochastic open-channel flow. II: Simulation experiments. Spatiotemporal stochastic open-channel flow. II: Simulation experiments.

Mesfer, Dr. M. Al-Zahrani An algorithm for designing a precipitation network in the south-western region of Saudi Arabia. An algorithm for designing a precipitation network in the south-western region of Saudi Arabia.

Mesfer, M. Al-Zahrani Identifying water quality sampling stations in Al-Khobar water distribution system, Kingdom of Saudi Arabia. Identifying water quality sampling stations in Al-Khobar water distribution system, Kingdom of Saudi Arabia.

Mesfer, M. Al-Zahrani Stochastic goal programming model for optimal blending of desalinated water with groundwater. Stochastic goal programming model for optimal blending of desalinated water with groundwater.

SA, Alghamdi Computer algorithm for the static analysis of circular helicoidal bars. Computer algorithm for the static analysis of circular helicoidal bars.

SA, Alghamdi HLXVIB - A computer code for free vibration analysis of circular helicoidal bars. HLXVIB - A computer code for free vibration analysis of circular helicoidal bars.

Saad, Ahmad Al-Gahtani, A.S., Al-Mussallam, A.A. Al-Gahtani, A.S., Al-Mussallam, A.A..

Saad, Ahmad Behaviour of patch repair of axially loaded reinforced concrete beams. Behaviour of patch repair of axially loaded reinforced concrete beams.

Saad, Ahmad Chloride threshold for corrosion of reinforcement in concrete. Chloride threshold for corrosion of reinforcement in concrete.

Saad, Ahmad Corrosion cracking in relation to bar diameter, cover, and concrete quality. Corrosion cracking in relation to bar diameter, cover, and concrete quality.

Saad, Ahmad Corrosion of reinforcing steel in fly ash blended cement concrete. Corrosion of reinforcing steel in fly ash blended cement concrete.

Saad, Ahmad Design optimization of continuous partially prestressed concrete beams. Design optimization of continuous partially prestressed concrete beams.

Saad, Ahmad Deterioration Of Concrete Structures In The Environment Of The Middle East. Deterioration Of Concrete Structures In The Environment Of The Middle East..

Saad, Ahmad Effect of reinforcement corrosion on bond strength. Effect of reinforcement corrosion on bond strength.

Saad, Ahmad Effect of reinforcement corrosion on flexural behavior of concrete slabs. Effect of reinforcement corrosion on flexural behavior of concrete slabs.

Saad, Ahmad Effect of tricalcium aluminate content of cement on corrosion of reinforcing steel in concrete. Effect of tricalcium aluminate content of cement on corrosion of reinforcing steel in concrete.

Saad, Ahmad Effectiveness of concrete surface treatment materials in reducing chloride-induced reinforcement corrosion. Effectiveness of concrete surface treatment materials in reducing chloride-induced reinforcement corrosion.

Saad, Ahmad Factors affecting threshold chloride for reinforcement corrosion in concrete. Factors affecting threshold chloride for reinforcement corrosion in concrete.

Saad, Ahmad Influence of cement composition on the corrosion of reinforcement and sulfate resistance of concrete. Influence of cement composition on the corrosion of reinforcement and sulfate resistance of concrete.

Saad, Ahmad Influence of construction practices on concrete durability. Influence of construction practices on concrete durability.

Saad, Ahmad Influence of sulfates on chloride binding in cements. Influence of sulfates on chloride binding in cements.

Saad, Ahmad Plastic shrinkage cracking of concrete in hot-arid environments. Plastic shrinkage cracking of concrete in hot-arid environments.

Saad, Ahmad Pore solution composition and reinforcement corrosion characteristics of microsilica blended cement concrete. Pore solution composition and reinforcement corrosion characteristics of microsilica blended cement concrete.

Saad, Ahmad Rebar corrosion and sulfate resistance of blast-furnace slag cement. Rebar corrosion and sulfate resistance of blast-furnace slag cement.

Saad, Ahmad Reinforcement corrosion-resisting characteristics of silica-fume blended-cement concrete. Reinforcement corrosion-resisting characteristics of silica-fume blended-cement concrete.

Saad, Ahmad Software For Optimum Design Of Highway Bridge Beams. Software For Optimum Design Of Highway Bridge Beams..

Saad, Ahmad Use of surface treatment materials to improve concrete durability. Use of surface treatment materials to improve concrete durability.

Conference or Workshop Item

AL-AMOUDI, OMAR Influence of chloride ions on sulphate deterioration in plain and blended cements. In: Influence of chloride ions on sulphate deterioration in plain and blended cements.

AL-AMOUDI, OMAR Plastic shrinkage cracking of blended cement concretes in hot environments. In: Plastic shrinkage cracking of blended cement concretes in hot environments.

Ahmad, Shamsad Diagnostic methods for rehabilitation of corrosion damaged R.C. structure. In: National Conference on Civil Engineering Materials and Structures, 19-21 January, 1995, Osmania University, Hyderabad, India.

Ahmad, Shamsad Effect of acidic waste water on mortar and concrete. In: International Symposium on Innovative World of Concrete-98, 16-19 November, 1998, Calcutta, India.

Ahmad, Shamsad Environmental problems due to fly ash and its use as building material. In: International Conference on New Challenges for Civil Engineers of Developing Countries in the 21st Century, 29 February, 1, 2 March, 1996, New Delhi, India.

Ahmad, Shamsad Improving durability of R.C. members through optimum selection of the levels of corrosion cracking factors. In: 7th International Conference on Concrete in Hot and Aggressive Environments, 13-15 October 2003, Bahrain.

Ahmad, Shamsad Influence of chloride content, cover, and concrete mix parameters on post depassivation service life of chloride contaminated R.C. structures. In: International Conference on Maintenance and Durability of Concrete Structures, 4-6 March, 1997, J.N.T. University, Hyderabad, India.

Ahmad, Shamsad Methodology for the assessment of corrosion damage in reinforced concrete structures. In: Eighth International Conference on Concrete Engineering & Technology (CONCET 2004), 19-21 April 2004, Kuala Lumpur, Malaysia.

Ahmad, Shamsad Rebar corrosion risk due to free chloride under tropical conditions. In: International Conference on New Challenges for Civil Engineers of Developing Countries in the 21st Century, 29 February, 1, 2 March, 1996, New Delhi, India.

Ahmad, Shamsad Recent developments in sulfur concrete technology. In: Recent developments in sulfur concrete technology.

Ahmad, Shamsad Recent developments in sulfur concrete technology. In: 7th International Conference and Exhibition on Chemistry in Industry (CHEMINDIX 2007), 26-28 March 2007, Bahrain.

Ahmad, Shamsad Reinforcement corrosion in the Arabian Gulf and its prevention– a review. In: 7th International Conference on Concrete in Hot and Aggressive Environments, 13-15 October 2003, Bahrain.

Ahmad, Shamsad Strategy for monitoring and repairing of concrete bridges exposed to corrosive environments. In: 3rd Gulf Conference on Roads (TGCR06), 6-8 March 2006, Muscat.

Ahmad, Shamsad A damage-propagation model for chloride-induced corrosion of reinforced concrete beams. In: 8th International Conference on Concrete in Hot and Aggressive Environments, 27-29 November 2006, Bahrain.

Ahmad, Shamsad A study of permeability and tortuosity of concrete. In: 30th Conference on Our World in Concrete & Structures (OW 05), 23-24 August 2005, Singapore.

Al-Dulaijan, S. U. Bond evaluation of environmentally conditioned GFRP/concrete systems. In: Bond evaluation of environmentally conditioned GFRP/concrete systems.

Al-Dulaijan, S. U. Inhibition of atmospheric corrosion of mild steel by sodium dihydrogen orthophosphate treatment. In: Inhibition of atmospheric corrosion of mild steel by sodium dihydrogen.

Al-Gahtani, Husain and Fairag, Faisal RBF METHOD FOR NAVIER STOKES EQUATIONS. In: RBF METHOD FOR NAVIER STOKES EQUATIONS.

Al-Ghamdi, Saeid Aboud and Shamsad, Ahmad MULTI-CRITERIA OPTIMAL DESIGN METHODOLOGY FOR DURABLE RC MEMBERS IN CORROSIVE ENVIRONMENTS –AN EXPERIMENTAL INVESTIGATION. In: MULTI-CRITERIA OPTIMAL DESIGN METHODOLOGY FOR DURABLE RC MEMBERS IN CORROSIVE ENVIRONMENTS –AN EXPERIMENTAL INVESTIGATION.

Al-Ghamedy, Hamdan Determination of parameters for a hyperbolic model of soils. In: Determination of parameters for a hyperbolic model of soils.

Al-Ghamedy, Hamdan Evaluation study of modified Mohr-Coulomb and cap models. In: Evaluation study of modified Mohr-Coulomb and cap models.

Al-Ghamedy, hamdan A generalized three invariants cap model and its numerical implementation to study soil-foundation interaction. In: A generalized three invariants cap model and its numerical implementation to study.

Algadhib, A.H. Comparative evaluation of plasticity theories against tension-torsion test at finite strain. In: Comparative evaluation of plasticity theories against tension-torsion test at finite strain.

Algadhib, A.H. Computational chemo-damage modelling for assessment of concrete patch repair durability. In: Computational chemo-damage modelling for assessment of concrete patch repair durability.

Algadhib, A.H. Fatigue behavior of reinforced concrete beams strengthened with CFRP strips. In: Fatigue behavior of reinforced concrete beams strengthened with CFRP strips.

Amoudi, Omer Long-term monitoring of FBEC steel bars corrosion in chloride-contaminated concrete. In: Long-term monitoring of FBEC steel bars corrosion in chloride-contaminated concrete.

Azad, A.K. Analysis of radially tapered circular plate sectors by finite difference. In: Analysis of radially tapered circular plate sectors by finite difference.

Azad, A.K. FATIGUE CRACK PROPAGATION IN PLAIN CONCRETE. In: FATIGUE CRACK PROPAGATION IN PLAIN CONCRETE..

Azad, A.K. FRACTURE CHARACTERIZATION OF REINFORCED CONCRETE BEAMS. In: FRACTURE CHARACTERIZATION OF REINFORCED CONCRETE BEAMS..

Bader, M.A. Cost of solar energy generated using PV panels. In: Cost of solar energy generated using PV panels.

Bader, M.A. A repair strategy for corrosion damaged concrete. In: A repair strategy for corrosion damaged concrete.

Baluch, M.H. and MK, Rahman and I.A, mahmoud Calculating Drying-Shrinkage Stresses – Readily Available Software Tools can be used for Analyses of Concrete Structures. In: Calculating Drying-Shrinkage Stresses – Readily Available Software Tools can be used for Analyses of Concrete Structures.

Baluch, M.H. and Rahman, MK and I.A, mahmoud Behaviour Of Cfrp Strengthened Cantilever Hollow-Core Panels. In: Behaviour Of Cfrp Strengthened Cantilever Hollow-Core Panels.

Baluch, M.H. and Rahman, MK and mahmoud, I.A Finite Element Modeling of Prestressed Hollow Core Slab Strengthened with CFRP Sheets in Flexure and Shear. In: Finite Element Modeling of Prestressed Hollow Core Slab Strengthened with CFRP Sheets in Flexure and Shear.

Baluch, M.H. and Rahman, MK and mahmoud, I.A Flexural Behavior of Precast, Prestressed Hollow-Core Concrete Slabs Strengthened by CFRP. In: Flexural Behavior of Precast, Prestressed Hollow-Core Concrete Slabs Strengthened by CFRP.

Baluch, M.H. and Rahman, MK and mahmoud, I.A Thermo-Hygral Analogue for Determination of Shrinkage Related Stresses in Concrete Structures. In: Thermo-Hygral Analogue for Determination of Shrinkage Related Stresses in Concrete Structures.

M. Sharif, Dr. Alfarabi Assessment of concrete patch repair performance. In: Assessment of concrete patch repair performance.

Saad, Ahmad Effect of cement composition on corrosion of reinforcing steel in concrete. In: From authors.

Saad, Ahmad Evaluation of repair materials for functional improvement of slabs and beams with corroded reinforcement. In: Proceedings of the Institution of Civil Engineers: Structures and Buildings.

Saad, Ahmad A repair strategy for corrosion damaged concrete. In: From authors.

ce, ce Concrete_Durability_The_Arabiab_Gulf_Experience_Mohammed_Maslehuddin. In: Concrete_Durability_The_Arabiab_Gulf_Experience_Mohammed_Maslehuddin.

civil, civil Influence_of_Arabian_Gulf_Environment_oc_Durability_of_reinforced_concrete_A_Al-Rabiah_Saudi_COWI-Consult_and_Partner. In: Influence_of_Arabian_Gulf_Environment_oc_Durability_of_reinforced_concrete_A_Al-Rabiah_Saudi_COWI-Consult_and_Partner.

civil, civil Performance_of_Concrete_in_Aggressive_Environments. In: Performance_of_Concrete_in_Aggressive_Environments.

slaeem, N and Rahman, MK and Baluch, M.H. Moisture Transmissibility and Shrinkage of Water Proof Concretes. In: Moisture Transmissibility and Shrinkage of Water Proof Concretes.

Monograph

Ahmad, Shamsad Establishing quality compliance criteria for concrete in Eastern Saudi Arabia. Project Report. KFUPM.

Ahmad, Shamsad Evaluation of sulfur concrete technology for local applications. Project Report. KFUPM.

Ahmad, Shamsad Formulating supplementary compliance criteria for locally produced concrete. Project Report. KFUPM.

Ahmad, Shamsad Prediction of residual strength of corrosion-damaged reinforced concrete beams. Project Report. KFUPM.

Ahmad, Shamsad A study of self-compacting concrete using local marginal aggregates. Project Report. KFUPM.

Ahmad, Shamsad A study of the relationship between permeability and tortuosity of concrete. Project Report. KFUPM.

Ahmad, Shamsad A study of the size-effect of corroded reinforced concrete beams in prediction of residual strength. Project Report. KFUPM.

Shamsad, Ahmad Study on PVC pipe products and causes of failures. Project Report. KFUPM.

Thesis

l Computer-Aided Modeling and Simulation of Flow of Self Compacting Concrete. Masters thesis, King Fahd University of Petroleum and Minerals.

l EFFECT OF CASTING TEMPERATURE AND CURING REGIME ON MECHANICAL PROPERTIES AND DURABILITY OF CONCRETE. Masters thesis, King Fahd University of Petroleum and Minerals.

l AN EXPERIMENTAL AND NUMERICAL STUDY OF RETROFITTED MASONRY WALLS UNDER CYCLIC LOADING]. PhD thesis, King Fahd University of Petroleum and Minerals.

l EXPERIMENTAL INVESTIGATION AND NUMERICAL MODELING OF TWO-DIMENSIONAL CHLORIDE DIFFUSION IN CONCRETE. Masters thesis, King Fahd University of Petroleum and Minerals.

l Elemental Analysis of Concrete using Reflected Prompt Gamma-Rays. Masters thesis, King Fahd University of Petroleum and Minerals.

l MODELING OF CONTINUOUS COMPOSITE PARTIALLY REINFORCED GIRDER WITH CFRP. Masters thesis, King Fahd University of Petroleum and Minerals.

l Modeling of Cyclic Behavior of Retrofitted Beam-Column Joint. PhD thesis, King Fahd University of Petroleum and Minerals.

l PERFORMANCE EVALUATION OF CORROSION INHIBITORS FOR LOCAL CONDITIONS. Masters thesis, King Fahd University of Petroleum and Minerals.

l PRODUCTION OF MEDIUM TO LOW STRENGTH CONCRETE UTILIZING INDIGENOUS WASTE PRODUCTS. Masters thesis, King Fahd University of Petroleum and Minerals.

l Production of sustainable concrete using indigenous Saudi Natural Pozzolan. Masters thesis, King Fahd University of Petroleum and Minerals.

l RELIABILITY-BASED STRENGTH PREDICTION MODEL FOR CORRODED REINFORCED CONCRETE COLUMNS AND BEAM-COLUMNS. PhD thesis, King Fahd University of Petroleum and Minerals.

l RETROFITTING OF EXTERIOR BEAM-COLUMN JOINTS USING CFRP. Masters thesis, King Fahd University of Petroleum and Minerals.

l SELF COMPACTING CONCRETE UTILIZING LOCAL MATERIALS. Masters thesis, King Fahd University of Petroleum and Minerals.

l STRUCTURAL BEHAVIOR OF UNREINFORCED HYBRID SLAB ELEMENTS CAST WITH ULTRA-HIGH PERFORMANCE CONCRETE (UHPC). PhD thesis, King Fahd University of Petroleum and Minerals.

l A STUDY ON DEVELOPING SELF-CONSOLIDATING CONCRETE (SCC) UTILIZING INDIGENOUS NATURAL AND INDUSTRIAL WASTE MATERIALS. Masters thesis, King Fahd University of Petroleum and Minerals.

l A STUDY ON MIX DESIGN AND MECHANICAL PROPERTIES OF REACTIVE POWDER CONCRETE (RPC) UTILIZING FINE QUARTZ SAND. Masters thesis, King Fahd University of Petroleum and Minerals.

l A STUDY ON UTILIZING CHEMICAL INHIBITORS IN NEW REINFORCED CONCRETE STRUCTURES. Masters thesis, King Fahd University of Petroleum and Minerals.

l Seismic evaluation and retrofit assessment of multistorey structures using pushover analysis (POA). Masters thesis, King Fahd University of Petroleum and Minerals.

l Shear Strength of corroded reinforced concrete beams. Masters thesis, King Fahd University of Petroleum and Minerals.

l Simulation of Chloride Transport in Concrete with Stress Induced Damage. PhD thesis, King Fahd University of Petroleum and Minerals.

l Study on Segregation and Rheology of Self Compacting Concrete. Masters thesis, King Fahd University of Petroleum and Minerals.

Abbasi, Mohammed Sajid Ali (1991) Non-linear finite element modelling of reinforced concrete slabs. PhD thesis, KFUPM.

Abdo, Muneer Qaid (2013) Experimental Investigation and Modeling the Heat of Hydration in Mass Concrete Structures. PhD thesis, King Fahd University of Petroleum and Minerals.

Abdul Hameed, Mohammed (2005) A study of mix design and durability of self compacting concrete. PhD thesis, KFUPM.

Abdullah, Medhat Kamal (1988) Analysis of horizontally curved pseudo slab type bridge deck continuous over discrete pier supports. Masters thesis, KFUPM.

Abiola, Taofiq Olatunbosun (2002) Plastic shrinkage cracking of blended cement concretes under hot weather conditions. Masters thesis, KFUPM.

Aboul-Nour, Louay Abdel-Razek (1988) Fracture and permeability characteristics of thermally degraded concrete. Masters thesis, KFUPM.

Abu-Salhah, Nudhal Abdul-Razzag (1982) Buckling of multiple braced columns. Masters thesis, KFUPM.

Abul-Feilat, Emad Areslan (1991) Optimum design of continuous partially prestressed concrete beams. Masters thesis, KFUPM.

Al-Abdul-Hadi, Salman Saleh (1982) Electrical resistivity of concrete in relation to corrosion of reinforcement. Masters thesis, KFUPM.

Al-Gahtani, Ahmad Saad (1981) An Investigation of corrosion of steel reinforcement in concrete in the Eastern Province of Saudi Arabia. Masters thesis, KFUPM.

Al-Gahtani, Husain Jubran (1985) Concrete mix design for hot weather. Masters thesis, KFUPM.

Al-Ghamdi, Saeid Aboud (1983) Minimum weight design of nonuniform steel I-girders and columns. Masters thesis, KFUPM.

Al-Hejji, Ali Ibrahim Ali (1989) A refined theory for symmetric orthotropic laminated plates. Masters thesis, KFUPM.

Al-Kaldi, Ezeldine F.H (2010) LIFE CYCLE COSTING FOR SELECTED STRUCTURAL MATERIALS FOR OFFSHORE PLATFORMS. Masters thesis, King Fahd University of Petroleum and Minerals.

Al-Khaled, Mohammad Abdul-Wahhab (1994) Deterioration of concrete structures in the coastal regions of the Republic of Yemen. Masters thesis, KFUPM.

Al-Kurdi, Saleh Muhammad Ahmad (1984) Durability assessment criterion for concrete and reinforcement exposed to simulated environmental conditions of Saudi Arabia. Masters thesis, KFUPM.

Al-Kutti, Walid Abubaker (2005) Compliance criteria for quality concrete. Masters thesis, KFUPM.

Al-Musallam, Abdallah Abdul-Karim (1980) A Photoelastic investigation of the stress distribution in the anchorage zones of post-tensioned concrete slabs. Masters thesis, KFUPM.

Al-Muslim, Husain Muhammad (2010) Impact of Combined Mechanical Damage on the Integrity of Pipelines. PhD thesis, King Fahd University of Petroleum and Minerals.

Al-Osta, Mohammed (2009) OPTIMIZATION OF CONTINUOUS POST-TENSIONED CONCRETE BRIDGE GIRDERS WITH VARIABLE DEPTH. Masters thesis, King Fahd University of Petroleum and Minerals.

Al-Rugaib, Muhammad Hamad (1978) Optimization of Concrete strength using local aggregates from the Eastern Province of Saudi Arabia. Masters thesis, KFUPM.

Al-Saadoun, Saadoun Saad (1980) A Three-dimensional photoelastic investigation of the stress distribution in the anchorage zone of post-tensioned beams. Masters thesis, KFUPM.

Al-Sayed, Ahmed Helmi (1979) Effect of the rigidity of columns and the dimensional changes in beams on post-tensioning forces. Masters thesis, KFUPM.

Al-Senan, Shukri Hasan (1979) Economic proportioning of continuous steel I - beam. Masters thesis, KFUPM.

Al-Shayea, Naser Abdul-Rahman (1985) Influence of cracks on the elastic stability of columns and frames. Masters thesis, KFUPM.

Al-Tholaia, Mohammed (2010) Durability Assessment of Joint Assembly for Fiberglass Resin Coated Concrete Cylinder Pipes. Masters thesis, King Fahd University of Petroleum and Minerals.

Al-Ustath, Ahmed (1990) Evaluation of repair materials with emphasis on crack injection repair. Masters thesis, KFUPM.

Al-Zahrani, Mesfer (1987) Effect of fiber reinforcement on the durability of reinforced concrete in Arabian Gulf Region. Masters thesis, KFUPM.

Ali, Mohammad Golam (1991) Criteria for cathodic protection of steel in concrete in the context of Arabian Gulf environment. PhD thesis, KFUPM.

Ali, Mohammed Rizwan (1999) Analysis of static and dynamic characteristics of twin-cell steel box girders. Masters thesis, KFUPM.

Ali, Syed Imran (2003) Effects of aggregate quality on reinforcement corrosion. Masters thesis, KFUPM.

Ali, Syed Qudrath (1982) A Study of development and performance of sulphur-based construction blocks. Masters thesis, KFUPM.

Asad, Mohammed (1995) Computational Modelling of shrinkage in repaired concrete. Masters thesis, KFUPM.

Ashmawi, Wayel Muhammad Al-Anwar (1990) Fracture modelling of reinforced concrete beams in mode I crack. Masters thesis, KFUPM.

Azhar, Mohammed (2007) Evaluation of ternary cements for improving concrete durability. Masters thesis, KFUPM.

Azher, Syed Ayub (2005) A prediction model for the residual flexural strength of corroded reinforced concrete beams. Masters thesis, KFUPM.

Aziz, abdur Rauf (1994) Reduction in bond and the strength of slabs due to corrosion of reinforcement. Masters thesis, KFUPM.

Balah, Mohamed (2000) Analysis of laminated general shells undergoing finite rotations and large motion. PhD thesis, KFUPM.

Bashir, Rashid (2000) Analysis and design of buried pipelines. Masters thesis, KFUPM.

Beg, Mansoor Ali (1996) Numerical modeling of RC slabs on tensionless elastic subgrade. Masters thesis, KFUPM.

Beshr, Hamoud Abdulrab Mohamed (2000) Durability of high performance concrete. PhD thesis, KFUPM.

Bin-omar, Abdul Rahman (1987) Nonlinear finite element analysis of ferrocement beams. Masters thesis, KFUPM.

Bishr, Hamoud Abdullrab Mohammed (1990) Assessment of concrete strength by lok and capo tests. Masters thesis, KFUPM.

Dehwah, Hamoud Ahmad Farhan (1990) Durability of reinforced concrete beams repaired with various repair materials. Masters thesis, KFUPM.

El-Boghdadi, Mahmoud Hassan (1998) Elastic plastic analysis of semi-rigid industrial frames. PhD thesis, KFUPM.

Elleithy, Wael Mohamed Ali (1995) Bond and durability of fusion-bonded epoxy-coated steel bars. Masters thesis, KFUPM.

Elleithy, Wael Mohammed Ali (2000) Iterative coupling of boundary and finite element methods. PhD thesis, KFUPM.

Fazlur Rahman, Qureshi Abbas Ali Mohammad (1995) Optimization of continuous post-tensioned bridge decks of prescribed lengths. Masters thesis, KFUPM.

Gazi, Syed Abdul Muqtader (2005) Durability performance of GFRP bars under aggressive local exposure conditions. Masters thesis, KFUPM.

Gomaa, Said Taha Khalil (1989) Finite element modelling for the bending of thick plates. Masters thesis, KFUPM.

Hameeduddin, Mohammed (2002) Evaluation of load transfer in axially loaded repaired concrete columns. Masters thesis, KFUPM.

Hammad, Samir Hamid (1980) Application of modified Reissner theory to sandwich plates. Masters thesis, KFUPM.

Hanif, Mohammad (1982) Performance of pozzolan cement concrete in a high chloride-sulphate environment. Masters thesis, KFUPM.

Hasanain, Ghazi Saleh (1976) Finite beams on an elastic foundation. Masters thesis, KFUPM.

Hassanain, Mostafa A. (1992) Optimal design of reinforced concrete frames. Masters thesis, KFUPM.

Hussain, Munawar (1992) Flexure and shear behaviour of damaged RC beams repaired by plate bonding. Masters thesis, KFUPM.

Hussain, Syed Ehtesham (1991) Mechanisms of high durability performance of plain and blended cements. PhD thesis, KFUPM.

Ibrahim, Mohammed (1996) Performance evaluation of concrete surface treatment materials. Masters thesis, KFUPM.

Iqbal, Khan Khalid (1989) Use of latex modified concrete as a bridge deck overlay. Masters thesis, KFUPM.

Ismail, Mohammed (2005) Improving the performance of damaged FBECR in chloride-contaminated concrete. Masters thesis, KFUPM.

Kamal, Ghassan Nashat (1978) Analysis of multi girder short span highway bridges. Masters thesis, KFUPM.

Kareem, Kaiser (1989) Load induced cracking and failure of concrete deck slabs in girder-slab type bridges. Masters thesis, KFUPM.

Khalil, Hossam Salah Eldin (1989) Performance of Epoxy-injected concrete in hot weather conditions. Masters thesis, KFUPM.

Khan, Asad-ur-Rehman (2000) Elasto-damage fatigue modeling of RC beams strengthened by CFRP. PhD thesis, KFUPM.

Khan, Asfahan Ullah (1981) An Investigation of properties of concrete made with concrete rubble as aggregate. Masters thesis, KFUPM.

Khan, Faiz Mohammed (2000) Performance evaluation of concrete coatings. Masters thesis, KFUPM.

Khan, Mohammad Imran (1998) Performance optimization and modeling of slurry seal and micro surfacing utilizing steel slag aggregates. Masters thesis, KFUPM.

Khan, Mohammad Shamim (1985) Corrosion of reinforcing steel in sulphur concrete. Masters thesis, KFUPM.

Khan, Mohammad Shebder (1995) Boundary element analysis of nonprismatic beams and plates. Masters thesis, KFUPM.

Khathlan, Abdul-Rahman (1981) Computation of lateral-torsional buckling loads for nonprismatic beam-columns. Masters thesis, KFUPM.

Khidir, Mohamed Ahmed (1983) Influence of transverse normal strain on finite, simply supported isotropic and orthotropic plates. Masters thesis, KFUPM.

Khojah, Abdallah Abdul-Adhim (1979) Approximate techniques towards solutions of Reissner plates. Masters thesis, KFUPM.

Khondaker, Abu Nasser (1985) A Variational finite element solution for the Navier-Stokes equations in two dimensions. Masters thesis, KFUPM.

Mahamud, Mohamed Muse (1988) Durability and thermal incompatibility of concrete constituents made from local materials in the Arabian Gulf Countries. Masters thesis, KFUPM.

Malikakkal, Navaz Cheriya (1994) Chloride diffusion in concrete/prediction of the onset of corrosion in reinforced concrete structures. Masters thesis, KFUPM.

Maslehuddin, Mohammed (1981) Optimizaiton of concrete mix design for durability in the Estern Province of Saudi Arabia. Masters thesis, KFUPM.

Mohammed, Aliyu Shazali (2004) Computational chemo-damage transport modeling of durability synergies in concrete. PhD thesis, KFUPM.

Mohammed, Aliyu Shazali (1995) Elasto-plastic collapse load analysis of single mitred bends. Masters thesis, KFUPM.

Mohammed, Ammar Khalil Hafedh (1989) A generalized theory for bending of thick isotropic rectangular plates. PhD thesis, KFUPM.

Mohdaly, Hani Mahmoud Mohamed Hasan (1997) Optimization of parabolic steel box arches. Masters thesis, KFUPM.

Mohiuddin, Jaffer (2006) Flexural behavior of prestressed precast hollow core slabs strengthened with CFRP sheets. Masters thesis, KFUPM.

Mohiuddin, Naseer Ahmed (1995) Use of small diameter cores in evaluation of in-situ concrete strength in Eastern Saudi Arabia. Masters thesis, KFUPM.

Mousselhy, El-Sayed Abdel-Aleem (1989) Evaluation of shear behavior of ferrocement using direct shear specimen and beam specimen. Masters thesis, KFUPM.

Moyeenul, Haque (1979) A Photoelastic investigation of stress distribution in deep beams with an without web opening. Masters thesis, KFUPM.

Naffa'a, Mahmoud Y. (2005) RBF-based meshless method for the analysis of thin elastic plates undergoing large deflections. Masters thesis, KFUPM.

Nassani, Dia Eddin (2007) Effect of curing methods on properties of plain and blended cement concretes. Masters thesis, KFUPM.

Nooru-Mohamed, Mohamed Buchary (1986) Mixed mode fracture for concrete. Masters thesis, KFUPM.

Pillai, Sunil Kumar G. (2011) DESIGN OF WAFFLE SLABS USING STRUT-AND-TIE MODEL. Masters thesis, King Fahd University of Petroleum and Minerals.

Qureshy, Asif Bashir (1985) Fatigue of concrete in the presence of a crack. Masters thesis, KFUPM.

Rafeeqi, Sahibzada Farooq Ahmad (1986) Flexural behavior of ferrocement I-beams and box-beams. Masters thesis, KFUPM.

Raza, Asif (2006) Moisture transport and shrinkage in new generation concretes. Masters thesis, KFUPM.

SCARIA, SHAJI (2011) A STUDY OF BEHAVIOUR OF HORIZONTAL KNEE CONNECTIONS. Masters thesis, King Fahd University of Petroleum and Minerals.

Saleem, Mohammed (1988) Flexural behavior of ferrocement sandwich panels. Masters thesis, KFUPM.

Sammour, Yousif Tawfiq (1985) A Photoelstic investigation of stress distribution in laterally loaded thin plates simulating window glass panels. Masters thesis, KFUPM.

Saqib, Mohammed Iqbal (1985) Flexural behavior of reinforced sulphur concrete beams. Masters thesis, KFUPM.

Shaalan, Ali Mohamed Kamel Ali (1998) Continuum damage model for compressive fatigue of high strength concrete. Masters thesis, KFUPM.

Sharaf, Amin Hussain (1978) Investigation into the modulus of elasticity of concrete. Masters thesis, KFUPM.

Taher, Salah El-Din Mohammed Fahmy (1995) Canonical elastoplastic - damage modelling of reinforced concrete. PhD thesis, KFUPM.

Waly, Hassan Aly Hassan (1992) Nonlinear behavior of cylinder-plate junction on tensionless elastic subgrade. Masters thesis, KFUPM.

Waris, Mohammed Abdul (1996) Plastic shrinkage cracking in hot weather conditions. Masters thesis, KFUPM.

Waseem, Mohammed (1982) Optimization of concrete mix design using a statistical approach. Masters thesis, KFUPM.

Zafar, Salman (2003) Influence of temperature and wind on moisture transport in cementitious materials. Masters thesis, KFUPM.

Zeedan, Hesham Mahmoud Salama (2007) Optimum design of mat foundation. Masters thesis, KFUPM.

Ziraba, Yasin Naku (1984) Material and fracture characterization of sisal fibre concrete. Masters thesis, KFUPM.

Ziraba, Yasin Naku (1993) Non-linear finite element analysis of reinforced concrete beams repaired by plate bonding. PhD thesis, KFUPM.

civil, civil (1982) The Influence function technique in the numerical analysis of plate bending of arbitrary plan form. Masters thesis, KFUPM.

civil, civil (1995) Prediction of shear/peeling failure in plated R/C beams. Masters thesis, KFUPM.

civil, civil (1986) Progressive fracture of reinforced deck slab in girder-slab type bridge deck. Masters thesis, KFUPM.

civil, civil (1996) Protection of reinforced concrete using corrosion inhibitors and coatings. Masters thesis, KFUPM.

civil, civil (1999) Simulation and assessment of concrete repair systems. PhD thesis, KFUPM.

civil, civil (1982) Stability analysis of orthotropic plates by a mixed complementary energy method. Masters thesis, KFUPM.

civil, civil (1985) Static analysis of horizontally curved bridge decks supported by flexible multi-girders. Masters thesis, KFUPM.

civil, civil (1975) Strain survey on a small plate with a circular hole in the center. Masters thesis, KFUPM.

civil, civil (1984) Strength of reinforced concrete beams in hot weather. Masters thesis, KFUPM.

civil, civil (1992) Strengthening of damaged reinforced concrete beams by external fiber glass plates. Masters thesis, KFUPM.

civil, civil (1985) Studies on the evaluation of permeability and corrosion resisting characteristics of Portland pozzolan concrete. Masters thesis, KFUPM.

civil, civil (1988) Study of the effect of rust and corrosion of reinforcement on bond behavior. Masters thesis, KFUPM.

civil, civil (1988) Study of the effect of rust and corrosion of reinforcemnt on bond behaviour. Masters thesis, KFUPM.

civil, civil (1988) Study of various repair methods for reinforced concrete flexural members. Masters thesis, KFUPM.

civil, civil (1983) Sulfur infiltrated concrete box sections with poly styrene core as panel units. Masters thesis, KFUPM.

civil, civil (1994) Three dimensional finite element analysis of brittle materials using CDM model. Masters thesis, KFUPM.

civil, civil (1996) The effect of casting and curing temperatures on the properties of concrete. Masters thesis, KFUPM.

civil, civil (1993) The effect of temperature and salt contamination on corrosion of reinforcing steel in OPC and blended cement concretes. Masters thesis, KFUPM.

This list was generated on Sun Oct 26 03:24:43 2014 AST.