KFUPM ePrints

Items where Division is "College Of Engineering Sciences > Mechanical Engineering Dept" and Year is

Up a level
Export as [feed] RSS 2.0 [feed] RSS 1.0 [feed] Atom
Group by: Creators | Item Type | No Grouping
Jump to: Article | Thesis
Number of items: 84.

Article

Al-Aqeeli, N. and Gandhidasan, P. THE USE OF AN OPEN CYCLE ABSORPTION SYSTEM IN AUTOMOBILES AS AN ALTERNATIVE TO CFCS. The 6th Saudi Engineering Conference, KFUPM, Dhahran, December 2002.

Al-Bedoor, B. O. and Ghouti, L. ON THE INVESTIGATION OF VIBRATION SIGNALS USING JOINT TIME FREQUENCY ANALYSIS. The 6th Saudi Engineering Conference, KFUPM, Dhahran, December 2002.

Al-Farayedhi, A. and Gandhidasan, P. and A. Antar, M. and Abdul Gaffar, M. S. EXPERIMENTAL STUDY OF HYBRID LIQUID DESICCANT BASED VAPOR COMPRESSION COOLING SYSTEM. The 6th Saudi Engineering Conference, KFUPM, Dhahran, December 2002.

Al-Farayedhi, Abdulghani A. FUEL CONSUMPTION OF A SPARK IGNITION ENGINE BLENDED WITH MTBE. The 6th Saudi Engineering Conference, KFUPM, Dhahran, December 2002.

El-Sinawi, A. and Hamdan, M. N. TIP DEFLECTION ESTIMATION OF A ROTATING CANTILEVERED BEAM. The 6th Saudi Engineering Conference, KFUPM, Dhahran, December 2002.

Fallatah, Gasem M. and Sheikh, Anwar K. and Khan, Zafarullah and Boah, John K. RELIABILITY OF DISSIMILAR METAL WELDS SUBJECTED TO SULFIDE STRESS CRACKING. The 6th Saudi Engineering Conference, KFUPM, Dhahran, December 2002.

Gasem, Zuhair M. and Al-Qutub, Amro M. CORROSION BEHAVIOR OF POWDER METALLURGY ALUMINUM ALLOY 6061/AL2O3 METAL MATRIX COMPOSITES. The 6th Saudi Engineering Conference, KFUPM, Dhahran, December 2002.

Hamdan, M. N. A SIMPLIFIED ANALYSIS OF EDGE SETTLEMENT OF A LARGE ABOVEGROUND LIQUID STORAGE TANK. The 6th Saudi Engineering Conference, KFUPM, Dhahran, December 2002.

Hawwa, M.A. and Masoud, A.A. A nonlinear PID servo controller for computer hard disk drives. Advanced Motion Control, 2006. 9th IEEE International Workshop on, 1.

Khan, Z. and Khan, R. and Al-Sulaiman, F. and Merah, N. FATIGUE DAMAGE IN WOVEN CARBON FABRIC/EPOXY LAMINATES AT NON-AMBIENT TEMPERATURES. The 6th Saudi Engineering Conference, KFUPM, Dhahran, December 2002.

Khulief, Yehia A. THE ENGINEERING PROFESSION AND THE PROFESSIONAL ENGINEER. The 6th Saudi Engineering Conference, KFUPM, Dhahran, December 2002.

Merah, N. and Al-Zayer, A. and Shuaib, A. and Arif, A. FINITE ELEMENT INVESTIGATION OF INITIAL CLEARANCE EFFECT ON TUBE-TO-TUBESHEET JOINT STRENGTH. The 6th Saudi Engineering Conference, KFUPM, Dhahran, December 2002.

QURESHI, BILAL AHMED and ZUBAIR, SYED M. A comprehensive design and rating study of evaporative coolers and condensers. Part I. Performance evaluation. International Journal of Refrigeration 29 (2006) 645–658.

QURESHI, BILAL AHMED and ZUBAIR, SYED M. A comprehensive design and rating study of evaporative coolers and condensers. Part II. Sensitivity analysis. International Journal of Refrigeration 29 (2006) 659–668.

QURESHI, BILAL AHMED and ZUBAIR, SYED M. An improved non-dimensional model of wet-cooling towers. PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART E-JOURNAL OF PROCESS MECHANICAL ENGINEERING 220 , 2005.

Qamar, S.Z. and Arif, A.F.M. and Sheikh, A. K. and Al-Fuhaid, K.M. SOME OBSERVATIONS ON PRESSURE DISTRIBUTION AND DIE FAILURE MODES IN HOT EXTRUSION. The 6th Saudi Engineering Conference, KFUPM, Dhahran, December 2002.

Thesis

l Acoustic Noise Control Using Multiple Expansion Chambers. Masters thesis, King Fahd University of Petroleum and Minerals.

l AlCrN HARD COATING DEPOSITED BY MAGNETRON SPUTTERING- SCRATCH, WEAR AND CREEP BEHAVIOR. Masters thesis, King Fahd University of Petroleum and Minerals.

l Balancing of Flexible Rotors at Low Speed. Masters thesis, King Fahd University of Petroleum and Minerals.

l CHARACTERIZATION OF GAS-OIL-WATER IN A HORIZONTAL PIPELINE. Masters thesis, King Fahd University of Petroleum and Minerals.

l CHARACTERIZATION OF OIL WATER FLOW IN HORIZANATAL PIPES. Masters thesis, King Fahd University of Petroleum and Minerals.

l COMPUTATIONAL FLUID DYNAMICS (CFD) MODELING OF SOLAR STEAM METHANE REFORMER AND DESIGN OF AN INTEGRATED NOVEL SOLAR COLLECTOR. Masters thesis, King Fahd University of Petroleum and Minerals.

l DEVELOPMENT AND CHARACTERIZATION OF EPOXY-CLAY ANOCOMPOSITES. PhD thesis, King Fahd University of Petroleum and Minerals.

l DEVELOPMENT OF A NOVEL HYBRID STORAGE SYSTEM FOR AQUA-AMMONIA SOLAR ABSORPTION REFRIGERATION CYCLE. Masters thesis, King Fahd University of Petroleum and Minerals.

l DEVELOPMENT OF ENERGY EFFICIENT SOLAR POWERED AQUA-AMMONIA ABSORPTION REFRIGERATION AND AIR-CONDITIONING SYSTEM. PhD thesis, King Fahd University of Petroleum and Minerals.

l DEVELOPMENT OF MULTI-LAYERED GRADIENT CERAMIC MEMBRANE. Masters thesis, King Fahd University of Petroleum and Minerals.

l DEVELOPMENT OF ULTRATHIN POLYCRYSTALLINE SILICON GERMANIUM FILMS AS STRUCTURAL LAYERS FOR APPLICATIONS IN NANOELECTROMECHANICAL SYSTEMS. PhD thesis, King Fahd University of Petroleum and Minerals.

l Degradation Mechanisms of Thermal Barrier Coatings Used in Land-Based Gas Turbine Blades Exposed to Low-Grade Fuel Impurities. Masters thesis, King Fahd University of Petroleum and Minerals.

l Development and Assessment of Solar-Assisted Gas Turbine Cogeneration Systems in Saudi Arabia. Masters thesis, King Fahd University of Petroleum and Minerals.

l Development and Characterization of Carbon Nanotubes (CNTs) And Silicon Carbide (SiC) Reinforced Al-based Nanocomposites. Masters thesis, King Fahd University of Petroleum and Minerals.

l Development of a Continuously Operated Solar Powered Refrigeration System. Masters thesis, King Fahd University of Petroleum and Minerals.

l EFFECT OF PROCESS PARAMETERS ON MICROSTRUCTURE AND PROPERTIES OF SPARK PLASMA SINTERED AL-SIC NANOCOMPOSITES. Masters thesis, King Fahd University of Petroleum and Minerals.

l EFFECT OF SILVER COATING AND DOPING OF IRON AND COBALT ON THE OXYGEN PERMEABILITY OF La2NiO4. Masters thesis, King Fahd University of Petroleum and Minerals.

l ENHANCEMENT OF MECHANICAL AND PHYSICAL PROPERTIES OF SILICATE BASED EPOXY NANOCOMPOSITES. Masters thesis, King Fahd University of Petroleum and Minerals.

l ENHANCING THE BIOFOULING RESISTANCE OF REVERSE OSMOSIS MEMBRANES BY A NOVEL SURFACE MODIFICATION TECHNIQUE. PhD thesis, King Fahd University of Petroleum and Minerals.

l EXPERIMENTAL INVESTIGATION OF TUBE RUPTURE UNDER BOILER DYNAMIC OPERATING CONDITIONS. Masters thesis, King Fahd University of Petroleum and Minerals.

l The Effect of Grain Growth Inhibitors to the Microstructural and Mechanical Properties of WC-Co NanoComposites. Masters thesis, King Fahd University of Petroleum and Minerals.

l Evaluation of the Effectiveness of Alkaline-earth metal oxides in Inhibiting Vanadium-induced Hot Corrosion of Yttria-stabilized Zirconia Thermal Barrier Coatings (TBCs). Masters thesis, King Fahd University of Petroleum and Minerals.

l Experimental & Numerical Investigations of Oxy-fuel Combustion Using Porous Plate Reactor. Masters thesis, King Fahd University of Petroleum and Minerals.

l Experimental Studies on Solar Photo-voltaic Refrigeration System. Masters thesis, King Fahd University of Petroleum and Minerals.

l Finite Element Modeling of Glass Fiber Reinforced Plastic Pipes under Impact Loading. Masters thesis, King Fahd University of Petroleum and Minerals.

l Flexural Analysis and Material Characterization of Laser Welded 316L Steel Blanks. Masters thesis, King Fahd University of Petroleum and Minerals.

l Flow Patterns of Oil-Water in Production Pipelines and Effect of Internal Turbulators. Masters thesis, King Fahd University of Petroleum and Minerals.

l Fluid Flow and Entropy Generation through a Throttling Valve. Masters thesis, King Fahd University of Petroleum and Minerals.

l Fundamental Studies of Dust Fouling and Mitigation Approaches for PV Modules. Masters thesis, King Fahd University of Petroleum and Minerals.

l H2S AND CO2 CORROSION OF SA-543 AND X65 STEELS IN OIL/WATER EMULSION. Masters thesis, King Fahd University of Petroleum and Minerals.

l THE IMPACT OF COST AND FOULING ON HEAT EXCHANGER INVENTORY IN POWER AND REFRIGERATION SYSTEMS. PhD thesis, King Fahd University of Petroleum and Minerals.

l IMPROVING QUALITY AND PRODUCTIVITY OF CASTING PROCESS BY USING ADVANCED SIMULATION AND RAPID PROTOTYPING TECHNOLOGY. Masters thesis, King Fahd University of Petroleum and Minerals.

l INFLUENCE OF CARBON NANOTUBES (CNT) ON THE MECHANICAL PROPERTIES OF THE POLYETHYLENE THERAPHTHALATE (PET)/CNT NANOCOMPOSITE FIBERS. Masters thesis, King Fahd University of Petroleum and Minerals.

l INFLUENCE OF GAS RADIATION MODELS ON OXY-COMBUSTION CHARACTERISTICS PREDICTIONS. Masters thesis, King Fahd University of Petroleum and Minerals.

l INVESTIGATING DISLOCATION STRUCTURE EVOLUTION DURING NANOINDENTATION. Masters thesis, King Fahd University of Petroleum and Minerals.

l Laser Melting of a Moving Slab in Relation to Surface Treatment Application. Masters thesis, King Fahd University of Petroleum and Minerals.

l Load and Energy Analysis of a Commercial Building. Masters thesis, King Fahd University of Petroleum and Minerals.

l Look-Up Table for Two-Phase pressure Drop Multiplier. Masters thesis, King Fahd University of Petroleum and Minerals.

l MODELING AND ANALYSIS OF HYBRID PV/WIND OFF GRID POWER GENERATION SYSTEM IN THE KINGDOM OF SAUDI ARABIA. Masters thesis, King Fahd University of Petroleum and Minerals.

l MODELING OF A COMBINED ITM-POROUS OXYGEN TRANSPORT REACTOR: TOWARDS A SPATIALLY UNIFORM TEMPERATURE ITM. Masters thesis, King Fahd University of Petroleum and Minerals.

l MODELING OF THERMAL PERFORMANCE OF LIQUID FLOW WITH NANOSIZED PARTICLES OF PHASE CHANGE MATERIAL IN MICROCHANNELS. Masters thesis, King Fahd University of Petroleum and Minerals.

l MULTI-PHYSICS MODELING OF PHOTOVOLTAIC MODULES AND ARRAYS WITH AUXILIARY THERMAL COLLECTORS. Masters thesis, King Fahd University of Petroleum and Minerals.

l MULTIPHYSICS MODELING OF THE SPARK PLASMA SINTERING PROCESS. Masters thesis, King Fahd University of Petroleum and Minerals.

l Modeling AND Optimization OF A Hybrid Solar Combined Cycle (HYCS). Masters thesis, King Fahd University of Petroleum and Minerals.

l Multi-stage Bubble Column Humidifier for Thermal Driven Mechanical Compression Humidification Dehumidification Desalination System. Masters thesis, King Fahd University of Petroleum and Minerals.

l NUMERICAL AND EXPERIMENTAL ANALYSIS OF PHOTOVOLTAIC PANEL COOLING. Masters thesis, King Fahd University of Petroleum and Minerals.

l NUMERICAL AND EXPERIMENTAL ANALYSIS ON THERMAL STRESS MEASUREMENT OF SPIRAL WELDED PIPES. Masters thesis, King Fahd University of Petroleum and Minerals.

l NUMERICAL AND EXPERIMENTAL INVESTIGATIONS OF FRICTION STIR WELDING OF TUBE-TUBESHEET JOINTS. PhD thesis, King Fahd University of Petroleum and Minerals.

l Noise Reduction in Centrifugal Compressors using Helmholtz Resonators. Masters thesis, King Fahd University of Petroleum and Minerals.

l A Numerical Modeling Approach for Transformation-Induced Failures. Masters thesis, King Fahd University of Petroleum and Minerals.

l OPTIMIZATION AND FAILURE ANALYSIS OF A CABLE BASED PARALLEL MANIPULATOR FOR SUBSEA APPLICATIONS. Masters thesis, King Fahd University of Petroleum and Minerals.

l OPTIMIZATION OF IMPACT RESISTANCE OF COMPOSITE PLATES AND PIPES. Masters thesis, King Fahd University of Petroleum and Minerals.

l PERFORMANCE ANALYSIS OF SOLAR ABSORBING FLUIDS IN CHANNEL FLOW INCORPORATING SELECTIVE SURFACES. Masters thesis, King Fahd University of Petroleum and Minerals.

l Performance Analysis of Oxygen Transport Reactors Utilizing Ion Transport Membranes. Masters thesis, King Fahd University of Petroleum and Minerals.

l Performance Evaluation of Seawater Counter Flow Cooling Towers. Masters thesis, King Fahd University of Petroleum and Minerals.

l Performance Improvement of a Vapor Compression Air Conditioning System by Condensate and Fresh Water Source. Masters thesis, King Fahd University of Petroleum and Minerals.

l Performance and Life Prediction Model for Photovoltaic Module: Effect of Encapsulant Constitutive Behavior. Masters thesis, King Fahd University of Petroleum and Minerals.

l Pressure Sensing in Vicinity of Leaks for Leak Detection. Masters thesis, King Fahd University of Petroleum and Minerals.

l STRUCTURAL STABILITY OF MEMS ARCHES ACTUATED BY ELECTROSTATIC FRINGING FIELDS. Masters thesis, King Fahd University of Petroleum and Minerals.

l STUDY ON THE SOLID PARTICLE EROSION AND EROSION-CORROSION BEHAVIOR OF ALUMINUM AND STEELS. Masters thesis, King Fahd University of Petroleum and Minerals.

l SYNTHESIS AND WEAR BEHAVIOR OF ALUMINUM 6061 ALLOY REINFORCED WITH CARBON NANOTUBES. Masters thesis, King Fahd University of Petroleum and Minerals.

l Study of the long-term degradation of boiler superheater tubes and its effects on remaining life predictions. Masters thesis, King Fahd University of Petroleum and Minerals.

l Synthesis and Characterization of Thin MFI-type Zeolite Layer on Porous Alumina Substrates. Masters thesis, King Fahd University of Petroleum and Minerals.

l THERMAL ANALYSIS OF THERMOELECTRIC POWER GENERATOR; INCLUDING THERMAL STRESSES. Masters thesis, King Fahd University of Petroleum and Minerals.

l Thermodynamic Analysis and Modeling Study of an Intermittent solar Adsorption Refrigeration System. Masters thesis, King Fahd University of Petroleum and Minerals.

l Thixoforging of Aluminum Nano-composites Synthesized by Ultrasonic Stir Casting. Masters thesis, King Fahd University of Petroleum and Minerals.

l WEAR BEHAVIOR OF MAGNESIUM BASED NANOCOMPOSITES. Masters thesis, King Fahd University of Petroleum and Minerals.

l applications of oxy-fuel combustion technology into ion transport membrane reactors and gas turbine combustors. PhD thesis, King Fahd University of Petroleum and Minerals.

This list was generated on Fri Oct 31 15:01:55 2014 AST.